Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "These are updates for platform specific code on 32-bit ARM machines,
  essentially anything that can not (yet) be expressed using DT files.

  Noteworthy changes include:

   - Added support for the TI DRA71x family of SoCs in mach-omap2, this
     is an new variant of the the DRA72x/DRA74x automotive infotainment
     chips we already supported for a while.

   - Added support for the ST STM32F746 SoC, the first Cortex-M7 based
     microcontroller we support, related to the smaller STM32F4 family.

   - Renesas adds support for r8a7743 and r8a7745 in mach-shmobile, see
     http://elinux.org/RZ-G

   - SMP is now supported on the OX820 platform

   - A lot of code in mach-omap2 gets removed as a follow-up to removing
     support for board files in the previous release

   - Davinci has some new work to improve USB support

   - For i.MX, the performance monitor now supports profiling the memory
     controller using 'perf'"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (95 commits)
  ARM: davinci: da830-evm: use gpio descriptor for mmc pins
  ARM: davinci: da850-evm: use gpio descriptor for mmc pins
  ARM: davinci: hawk: use gpio descriptor for mmc pins
  ARM: ARTPEC-6: add select MFD_SYSCON to MACH_ARTPEC6
  ARM: davinci: da8xx: Fix ohci device name
  ARM: oxnas: Add OX820 config and makefile entry
  ARM: oxnas: Add OX820 SMP support
  ARM: davinci: PM: fix build when da850 not compiled in
  ARM: orion5x: remove legacy support of ls-chl
  ARM: integrator: drop EBI access use syscon
  ARM: BCM5301X: Add back handler ignoring external imprecise aborts
  ARM: davinci: PM: support da8xx DT platforms
  ARM: davinci: PM: cleanup: remove references to pdata
  ARM: davinci: PM: rework init, remove platform device
  ARM: Kconfig: Introduce MACH_STM32F746 flag
  ARM: mach-stm32: Add a new SOC - STM32F746
  ARM: shmobile: document SK-RZG1E board
  ARM: shmobile: r8a7745: basic SoC support
  ARM: imx: mach-imx6ul: add imx6ull support
  ARM: zynq: Reserve correct amount of non-DMA RAM
  ...

1 files changed, 23 insertions, 1 deletions

diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c
index e1d39a1e9628..8965e3f536c3 100644
--- a/drivers/watchdog/sa1100_wdt.c
+++ b/drivers/watchdog/sa1100_wdt.c
@@ -22,6 +22,7 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
+#include <linux/clk.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/fs.h>
@@ -155,12 +156,27 @@ static struct miscdevice sa1100dog_miscdev = {
 };
 
 static int margin __initdata = 60;		/* (secs) Default is 1 minute */
+static struct clk *clk;
 
 static int __init sa1100dog_init(void)
 {
 	int ret;
 
-	oscr_freq = get_clock_tick_rate();
+	clk = clk_get(NULL, "OSTIMER0");
+	if (IS_ERR(clk)) {
+		pr_err("SA1100/PXA2xx Watchdog Timer: clock not found: %d\n",
+		       (int) PTR_ERR(clk));
+		return PTR_ERR(clk);
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		pr_err("SA1100/PXA2xx Watchdog Timer: clock failed to prepare+enable: %d\n",
+		       ret);
+		goto err;
+	}
+
+	oscr_freq = clk_get_rate(clk);
 
 	/*
 	 * Read the reset status, and save it for later.  If
@@ -176,11 +192,17 @@ static int __init sa1100dog_init(void)
 		pr_info("SA1100/PXA2xx Watchdog Timer: timer margin %d sec\n",
 			margin);
 	return ret;
+err:
+	clk_disable_unprepare(clk);
+	clk_put(clk);
+	return ret;
 }
 
 static void __exit sa1100dog_exit(void)
 {
 	misc_deregister(&sa1100dog_miscdev);
+	clk_disable_unprepare(clk);
+	clk_put(clk);
 }
 
 module_init(sa1100dog_init);