Merge tag 'char-misc-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc/whatever driver changes for 5.6-rc1

  Included in here are loads of things from a variety of different
  driver subsystems:
   - soundwire updates
   - binder updates
   - nvmem updates
   - firmware drivers updates
   - extcon driver updates
   - various misc driver updates
   - fpga driver updates
   - interconnect subsystem and driver updates
   - bus driver updates
   - uio driver updates
   - mei driver updates
   - w1 driver cleanups
   - various other small driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (86 commits)
  mei: me: add jasper point DID
  char: hpet: Use flexible-array member
  binder: fix log spam for existing debugfs file creation.
  mei: me: add comet point (lake) H device ids
  nvmem: add QTI SDAM driver
  dt-bindings: nvmem: add binding for QTI SPMI SDAM
  dt-bindings: imx-ocotp: Add i.MX8MP compatible
  dt-bindings: soundwire: fix example
  soundwire: cadence: fix kernel-doc parameter descriptions
  soundwire: intel: report slave_ids for each link to SOF driver
  siox: Use the correct style for SPDX License Identifier
  w1: omap-hdq: Simplify driver with PM runtime autosuspend
  firmware: stratix10-svc: Remove unneeded semicolon
  firmware: google: Probe for a GSMI handler in firmware
  firmware: google: Unregister driver_info on failure and exit in gsmi
  firmware: google: Release devices before unregistering the bus
  slimbus: qcom: add missed clk_disable_unprepare in remove
  slimbus: Use the correct style for SPDX License Identifier
  slimbus: qcom-ngd-ctrl: Use dma_request_chan() instead dma_request_slave_channel()
  dt-bindings: SLIMBus: add slim devices optional properties
  ...

1 files changed, 113 insertions, 235 deletions

diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index 4164045866b3..aa09f8527776 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -38,12 +38,6 @@
 #define OMAP_HDQ_INT_STATUS_TXCOMPLETE		BIT(2)
 #define OMAP_HDQ_INT_STATUS_RXCOMPLETE		BIT(1)
 #define OMAP_HDQ_INT_STATUS_TIMEOUT		BIT(0)
-#define OMAP_HDQ_SYSCONFIG			0x14
-#define OMAP_HDQ_SYSCONFIG_SOFTRESET		BIT(1)
-#define OMAP_HDQ_SYSCONFIG_AUTOIDLE		BIT(0)
-#define OMAP_HDQ_SYSCONFIG_NOIDLE		0x0
-#define OMAP_HDQ_SYSSTATUS			0x18
-#define OMAP_HDQ_SYSSTATUS_RESETDONE		BIT(0)
 
 #define OMAP_HDQ_FLAG_CLEAR			0
 #define OMAP_HDQ_FLAG_SET			1
@@ -62,17 +56,9 @@ struct hdq_data {
 	void __iomem		*hdq_base;
 	/* lock status update */
 	struct  mutex		hdq_mutex;
-	int			hdq_usecount;
 	u8			hdq_irqstatus;
 	/* device lock */
 	spinlock_t		hdq_spinlock;
-	/*
-	 * Used to control the call to omap_hdq_get and omap_hdq_put.
-	 * HDQ Protocol: Write the CMD|REG_address first, followed by
-	 * the data wrire or read.
-	 */
-	int			init_trans;
-	int                     rrw;
 	/* mode: 0-HDQ 1-W1 */
 	int                     mode;
 
@@ -99,15 +85,6 @@ static inline u8 hdq_reg_merge(struct hdq_data *hdq_data, u32 offset,
 	return new_val;
 }
 
-static void hdq_disable_interrupt(struct hdq_data *hdq_data, u32 offset,
-				  u32 mask)
-{
-	u32 ie;
-
-	ie = readl(hdq_data->hdq_base + offset);
-	writel(ie & mask, hdq_data->hdq_base + offset);
-}
-
 /*
  * Wait for one or more bits in flag change.
  * HDQ_FLAG_SET: wait until any bit in the flag is set.
@@ -142,22 +119,24 @@ static int hdq_wait_for_flag(struct hdq_data *hdq_data, u32 offset,
 	return ret;
 }
 
+/* Clear saved irqstatus after using an interrupt */
+static void hdq_reset_irqstatus(struct hdq_data *hdq_data)
+{
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags);
+	hdq_data->hdq_irqstatus = 0;
+	spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags);
+}
+
 /* write out a byte and fill *status with HDQ_INT_STATUS */
 static int hdq_write_byte(struct hdq_data *hdq_data, u8 val, u8 *status)
 {
 	int ret;
 	u8 tmp_status;
-	unsigned long irqflags;
 
 	*status = 0;
 
-	spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags);
-	/* clear interrupt flags via a dummy read */
-	hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
-	/* ISR loads it with new INT_STATUS */
-	hdq_data->hdq_irqstatus = 0;
-	spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags);
-
 	hdq_reg_out(hdq_data, OMAP_HDQ_TX_DATA, val);
 
 	/* set the GO bit */
@@ -191,6 +170,7 @@ static int hdq_write_byte(struct hdq_data *hdq_data, u8 val, u8 *status)
 	}
 
 out:
+	hdq_reset_irqstatus(hdq_data);
 	return ret;
 }
 
@@ -237,47 +217,11 @@ static void omap_w1_search_bus(void *_hdq, struct w1_master *master_dev,
 	slave_found(master_dev, id);
 }
 
-static int _omap_hdq_reset(struct hdq_data *hdq_data)
-{
-	int ret;
-	u8 tmp_status;
-
-	hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG,
-		    OMAP_HDQ_SYSCONFIG_SOFTRESET);
-	/*
-	 * Select HDQ/1W mode & enable clocks.
-	 * It is observed that INT flags can't be cleared via a read and GO/INIT
-	 * won't return to zero if interrupt is disabled. So we always enable
-	 * interrupt.
-	 */
-	hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS,
-		OMAP_HDQ_CTRL_STATUS_CLOCKENABLE |
-		OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK);
-
-	/* wait for reset to complete */
-	ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_SYSSTATUS,
-		OMAP_HDQ_SYSSTATUS_RESETDONE, OMAP_HDQ_FLAG_SET, &tmp_status);
-	if (ret)
-		dev_dbg(hdq_data->dev, "timeout waiting HDQ reset, %x",
-				tmp_status);
-	else {
-		hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS,
-			OMAP_HDQ_CTRL_STATUS_CLOCKENABLE |
-			OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK |
-			hdq_data->mode);
-		hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG,
-			OMAP_HDQ_SYSCONFIG_AUTOIDLE);
-	}
-
-	return ret;
-}
-
 /* Issue break pulse to the device */
 static int omap_hdq_break(struct hdq_data *hdq_data)
 {
 	int ret = 0;
 	u8 tmp_status;
-	unsigned long irqflags;
 
 	ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
 	if (ret < 0) {
@@ -286,13 +230,6 @@ static int omap_hdq_break(struct hdq_data *hdq_data)
 		goto rtn;
 	}
 
-	spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags);
-	/* clear interrupt flags via a dummy read */
-	hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
-	/* ISR loads it with new INT_STATUS */
-	hdq_data->hdq_irqstatus = 0;
-	spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags);
-
 	/* set the INIT and GO bit */
 	hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS,
 		OMAP_HDQ_CTRL_STATUS_INITIALIZATION | OMAP_HDQ_CTRL_STATUS_GO,
@@ -341,6 +278,7 @@ static int omap_hdq_break(struct hdq_data *hdq_data)
 			" return to zero, %x", tmp_status);
 
 out:
+	hdq_reset_irqstatus(hdq_data);
 	mutex_unlock(&hdq_data->hdq_mutex);
 rtn:
 	return ret;
@@ -357,7 +295,7 @@ static int hdq_read_byte(struct hdq_data *hdq_data, u8 *val)
 		goto rtn;
 	}
 
-	if (!hdq_data->hdq_usecount) {
+	if (pm_runtime_suspended(hdq_data->dev)) {
 		ret = -EINVAL;
 		goto out;
 	}
@@ -388,86 +326,13 @@ static int hdq_read_byte(struct hdq_data *hdq_data, u8 *val)
 	/* the data is ready. Read it in! */
 	*val = hdq_reg_in(hdq_data, OMAP_HDQ_RX_DATA);
 out:
+	hdq_reset_irqstatus(hdq_data);
 	mutex_unlock(&hdq_data->hdq_mutex);
 rtn:
 	return ret;
 
 }
 
-/* Enable clocks and set the controller to HDQ/1W mode */
-static int omap_hdq_get(struct hdq_data *hdq_data)
-{
-	int ret = 0;
-
-	ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
-	if (ret < 0) {
-		ret = -EINTR;
-		goto rtn;
-	}
-
-	if (OMAP_HDQ_MAX_USER == hdq_data->hdq_usecount) {
-		dev_dbg(hdq_data->dev, "attempt to exceed the max use count");
-		ret = -EINVAL;
-		goto out;
-	} else {
-		hdq_data->hdq_usecount++;
-		try_module_get(THIS_MODULE);
-		if (1 == hdq_data->hdq_usecount) {
-
-			pm_runtime_get_sync(hdq_data->dev);
-
-			/* make sure HDQ/1W is out of reset */
-			if (!(hdq_reg_in(hdq_data, OMAP_HDQ_SYSSTATUS) &
-				OMAP_HDQ_SYSSTATUS_RESETDONE)) {
-				ret = _omap_hdq_reset(hdq_data);
-				if (ret)
-					/* back up the count */
-					hdq_data->hdq_usecount--;
-			} else {
-				/* select HDQ/1W mode & enable clocks */
-				hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS,
-					OMAP_HDQ_CTRL_STATUS_CLOCKENABLE |
-					OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK |
-					hdq_data->mode);
-				hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG,
-					OMAP_HDQ_SYSCONFIG_NOIDLE);
-				hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
-			}
-		}
-	}
-
-out:
-	mutex_unlock(&hdq_data->hdq_mutex);
-rtn:
-	return ret;
-}
-
-/* Disable clocks to the module */
-static int omap_hdq_put(struct hdq_data *hdq_data)
-{
-	int ret = 0;
-
-	ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
-	if (ret < 0)
-		return -EINTR;
-
-	hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG,
-		    OMAP_HDQ_SYSCONFIG_AUTOIDLE);
-	if (0 == hdq_data->hdq_usecount) {
-		dev_dbg(hdq_data->dev, "attempt to decrement use count"
-			" when it is zero");
-		ret = -EINVAL;
-	} else {
-		hdq_data->hdq_usecount--;
-		module_put(THIS_MODULE);
-		if (0 == hdq_data->hdq_usecount)
-			pm_runtime_put_sync(hdq_data->dev);
-	}
-	mutex_unlock(&hdq_data->hdq_mutex);
-
-	return ret;
-}
-
 /*
  * W1 triplet callback function - used for searching ROM addresses.
  * Registered only when controller is in 1-wire mode.
@@ -482,7 +347,12 @@ static u8 omap_w1_triplet(void *_hdq, u8 bdir)
 		  OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK;
 	u8 mask = ctrl | OMAP_HDQ_CTRL_STATUS_DIR;
 
-	omap_hdq_get(_hdq);
+	err = pm_runtime_get_sync(hdq_data->dev);
+	if (err < 0) {
+		pm_runtime_put_noidle(hdq_data->dev);
+
+		return err;
+	}
 
 	err = mutex_lock_interruptible(&hdq_data->hdq_mutex);
 	if (err < 0) {
@@ -490,7 +360,6 @@ static u8 omap_w1_triplet(void *_hdq, u8 bdir)
 		goto rtn;
 	}
 
-	hdq_data->hdq_irqstatus = 0;
 	/* read id_bit */
 	hdq_reg_merge(_hdq, OMAP_HDQ_CTRL_STATUS,
 		      ctrl | OMAP_HDQ_CTRL_STATUS_DIR, mask);
@@ -504,7 +373,9 @@ static u8 omap_w1_triplet(void *_hdq, u8 bdir)
 	}
 	id_bit = (hdq_reg_in(_hdq, OMAP_HDQ_RX_DATA) & 0x01);
 
-	hdq_data->hdq_irqstatus = 0;
+	/* Must clear irqstatus for another RXCOMPLETE interrupt */
+	hdq_reset_irqstatus(hdq_data);
+
 	/* read comp_bit */
 	hdq_reg_merge(_hdq, OMAP_HDQ_CTRL_STATUS,
 		      ctrl | OMAP_HDQ_CTRL_STATUS_DIR, mask);
@@ -547,18 +418,33 @@ static u8 omap_w1_triplet(void *_hdq, u8 bdir)
 		      OMAP_HDQ_CTRL_STATUS_SINGLE);
 
 out:
+	hdq_reset_irqstatus(hdq_data);
 	mutex_unlock(&hdq_data->hdq_mutex);
 rtn:
-	omap_hdq_put(_hdq);
+	pm_runtime_mark_last_busy(hdq_data->dev);
+	pm_runtime_put_autosuspend(hdq_data->dev);
+
 	return ret;
 }
 
 /* reset callback */
 static u8 omap_w1_reset_bus(void *_hdq)
 {
-	omap_hdq_get(_hdq);
-	omap_hdq_break(_hdq);
-	omap_hdq_put(_hdq);
+	struct hdq_data *hdq_data = _hdq;
+	int err;
+
+	err = pm_runtime_get_sync(hdq_data->dev);
+	if (err < 0) {
+		pm_runtime_put_noidle(hdq_data->dev);
+
+		return err;
+	}
+
+	omap_hdq_break(hdq_data);
+
+	pm_runtime_mark_last_busy(hdq_data->dev);
+	pm_runtime_put_autosuspend(hdq_data->dev);
+
 	return 0;
 }
 
@@ -569,37 +455,19 @@ static u8 omap_w1_read_byte(void *_hdq)
 	u8 val = 0;
 	int ret;
 
-	/* First write to initialize the transfer */
-	if (hdq_data->init_trans == 0)
-		omap_hdq_get(hdq_data);
+	ret = pm_runtime_get_sync(hdq_data->dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(hdq_data->dev);
 
-	ret = hdq_read_byte(hdq_data, &val);
-	if (ret) {
-		ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
-		if (ret < 0) {
-			dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
-			return -EINTR;
-		}
-		hdq_data->init_trans = 0;
-		mutex_unlock(&hdq_data->hdq_mutex);
-		omap_hdq_put(hdq_data);
 		return -1;
 	}
 
-	hdq_disable_interrupt(hdq_data, OMAP_HDQ_CTRL_STATUS,
-			      ~OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK);
+	ret = hdq_read_byte(hdq_data, &val);
+	if (ret)
+		ret = -1;
 
-	/* Write followed by a read, release the module */
-	if (hdq_data->init_trans) {
-		ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
-		if (ret < 0) {
-			dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
-			return -EINTR;
-		}
-		hdq_data->init_trans = 0;
-		mutex_unlock(&hdq_data->hdq_mutex);
-		omap_hdq_put(hdq_data);
-	}
+	pm_runtime_mark_last_busy(hdq_data->dev);
+	pm_runtime_put_autosuspend(hdq_data->dev);
 
 	return val;
 }
@@ -611,9 +479,12 @@ static void omap_w1_write_byte(void *_hdq, u8 byte)
 	int ret;
 	u8 status;
 
-	/* First write to initialize the transfer */
-	if (hdq_data->init_trans == 0)
-		omap_hdq_get(hdq_data);
+	ret = pm_runtime_get_sync(hdq_data->dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(hdq_data->dev);
+
+		return;
+	}
 
 	/*
 	 * We need to reset the slave before
@@ -623,31 +494,15 @@ static void omap_w1_write_byte(void *_hdq, u8 byte)
 	if (byte == W1_SKIP_ROM)
 		omap_hdq_break(hdq_data);
 
-	ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
-	if (ret < 0) {
-		dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
-		return;
-	}
-	hdq_data->init_trans++;
-	mutex_unlock(&hdq_data->hdq_mutex);
-
 	ret = hdq_write_byte(hdq_data, byte, &status);
 	if (ret < 0) {
 		dev_dbg(hdq_data->dev, "TX failure:Ctrl status %x\n", status);
-		return;
+		goto out_err;
 	}
 
-	/* Second write, data transferred. Release the module */
-	if (hdq_data->init_trans > 1) {
-		omap_hdq_put(hdq_data);
-		ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
-		if (ret < 0) {
-			dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
-			return;
-		}
-		hdq_data->init_trans = 0;
-		mutex_unlock(&hdq_data->hdq_mutex);
-	}
+out_err:
+	pm_runtime_mark_last_busy(hdq_data->dev);
+	pm_runtime_put_autosuspend(hdq_data->dev);
 }
 
 static struct w1_bus_master omap_w1_master = {
@@ -656,6 +511,35 @@ static struct w1_bus_master omap_w1_master = {
 	.reset_bus	= omap_w1_reset_bus,
 };
 
+static int __maybe_unused omap_hdq_runtime_suspend(struct device *dev)
+{
+	struct hdq_data *hdq_data = dev_get_drvdata(dev);
+
+	hdq_reg_out(hdq_data, 0, hdq_data->mode);
+	hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
+
+	return 0;
+}
+
+static int __maybe_unused omap_hdq_runtime_resume(struct device *dev)
+{
+	struct hdq_data *hdq_data = dev_get_drvdata(dev);
+
+	/* select HDQ/1W mode & enable clocks */
+	hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS,
+		    OMAP_HDQ_CTRL_STATUS_CLOCKENABLE |
+		    OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK |
+		    hdq_data->mode);
+	hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
+
+	return 0;
+}
+
+static const struct dev_pm_ops omap_hdq_pm_ops = {
+	SET_RUNTIME_PM_OPS(omap_hdq_runtime_suspend,
+			   omap_hdq_runtime_resume, NULL)
+};
+
 static int omap_hdq_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -677,23 +561,27 @@ static int omap_hdq_probe(struct platform_device *pdev)
 	if (IS_ERR(hdq_data->hdq_base))
 		return PTR_ERR(hdq_data->hdq_base);
 
-	hdq_data->hdq_usecount = 0;
-	hdq_data->rrw = 0;
 	mutex_init(&hdq_data->hdq_mutex);
 
+	ret = of_property_read_string(pdev->dev.of_node, "ti,mode", &mode);
+	if (ret < 0 || !strcmp(mode, "hdq")) {
+		hdq_data->mode = 0;
+		omap_w1_master.search = omap_w1_search_bus;
+	} else {
+		hdq_data->mode = 1;
+		omap_w1_master.triplet = omap_w1_triplet;
+	}
+
 	pm_runtime_enable(&pdev->dev);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(&pdev->dev, 300);
 	ret = pm_runtime_get_sync(&pdev->dev);
 	if (ret < 0) {
+		pm_runtime_put_noidle(&pdev->dev);
 		dev_dbg(&pdev->dev, "pm_runtime_get_sync failed\n");
 		goto err_w1;
 	}
 
-	ret = _omap_hdq_reset(hdq_data);
-	if (ret) {
-		dev_dbg(&pdev->dev, "reset failed\n");
-		goto err_irq;
-	}
-
 	rev = hdq_reg_in(hdq_data, OMAP_HDQ_REVISION);
 	dev_info(&pdev->dev, "OMAP HDQ Hardware Rev %c.%c. Driver in %s mode\n",
 		(rev >> 4) + '0', (rev & 0x0f) + '0', "Interrupt");
@@ -715,16 +603,8 @@ static int omap_hdq_probe(struct platform_device *pdev)
 
 	omap_hdq_break(hdq_data);
 
-	pm_runtime_put_sync(&pdev->dev);
-
-	ret = of_property_read_string(pdev->dev.of_node, "ti,mode", &mode);
-	if (ret < 0 || !strcmp(mode, "hdq")) {
-		hdq_data->mode = 0;
-		omap_w1_master.search = omap_w1_search_bus;
-	} else {
-		hdq_data->mode = 1;
-		omap_w1_master.triplet = omap_w1_triplet;
-	}
+	pm_runtime_mark_last_busy(&pdev->dev);
+	pm_runtime_put_autosuspend(&pdev->dev);
 
 	omap_w1_master.data = hdq_data;
 
@@ -739,6 +619,7 @@ static int omap_hdq_probe(struct platform_device *pdev)
 err_irq:
 	pm_runtime_put_sync(&pdev->dev);
 err_w1:
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
 	return ret;
@@ -746,23 +627,19 @@ err_w1:
 
 static int omap_hdq_remove(struct platform_device *pdev)
 {
-	struct hdq_data *hdq_data = platform_get_drvdata(pdev);
+	int active;
 
-	mutex_lock(&hdq_data->hdq_mutex);
-
-	if (hdq_data->hdq_usecount) {
-		dev_dbg(&pdev->dev, "removed when use count is not zero\n");
-		mutex_unlock(&hdq_data->hdq_mutex);
-		return -EBUSY;
-	}
+	active = pm_runtime_get_sync(&pdev->dev);
+	if (active < 0)
+		pm_runtime_put_noidle(&pdev->dev);
 
-	mutex_unlock(&hdq_data->hdq_mutex);
+	w1_remove_master_device(&omap_w1_master);
 
-	/* remove module dependency */
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
+	if (active >= 0)
+		pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
-	w1_remove_master_device(&omap_w1_master);
-
 	return 0;
 }
 
@@ -779,6 +656,7 @@ static struct platform_driver omap_hdq_driver = {
 	.driver = {
 		.name =	"omap_hdq",
 		.of_match_table = omap_hdq_dt_ids,
+		.pm = &omap_hdq_pm_ops,
 	},
 };
 module_platform_driver(omap_hdq_driver);