diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2014-08-08 11:00:26 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2014-08-08 11:00:26 -0700 |
commit | 44c916d58b9ef1f2c4aec2def57fa8289c716a60 (patch) | |
tree | e4c886dd0948eefeed883f66c9a21f39a5731103 /drivers/video | |
parent | 889fa782bf8ebe7c0d0ed0a9429bf43197f0f64e (diff) | |
parent | c4846a7823bfd34ecb2dc56b025e19285432d08d (diff) | |
download | linux-44c916d58b9ef1f2c4aec2def57fa8289c716a60.tar.bz2 |
Merge tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Olof Johansson:
"This merge window brings a good size of cleanups on various platforms.
Among the bigger ones:
- Removal of Samsung s5pc100 and s5p64xx platforms. Both of these
have lacked active support for quite a while, and after asking
around nobody showed interest in keeping them around. If needed,
they could be resurrected in the future but it's more likely that
we would prefer reintroduction of them as DT and
multiplatform-enabled platforms instead.
- OMAP4 controller code register define diet. They defined a lot of
registers that were never actually used, etc.
- Move of some of the Tegra platform code (PMC, APBIO, fuse,
powergate) to drivers/soc so it can be shared with 64-bit code.
This also converts them over to traditional driver models where
possible.
- Removal of legacy gpio-samsung driver, since the last users have
been removed (moved to pinctrl)
Plus a bunch of smaller changes for various platforms that sort of
dissapear in the diffstat for the above. clps711x cleanups, shmobile
header file refactoring/moves for multiplatform friendliness, some
misc cleanups, etc"
* tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (117 commits)
drivers: CCI: Correct use of ! and &
video: clcd-versatile: Depend on ARM
video: fix up versatile CLCD helper move
MAINTAINERS: Add sdhci-st file to ARCH/STI architecture
ARM: EXYNOS: Fix build breakge with PM_SLEEP=n
MAINTAINERS: Remove Kirkwood
ARM: tegra: Convert PMC to a driver
soc/tegra: fuse: Set up in early initcall
ARM: tegra: Always lock the CPU reset vector
ARM: tegra: Setup CPU hotplug in a pure initcall
soc/tegra: Implement runtime check for Tegra SoCs
soc/tegra: fuse: fix dummy functions
soc/tegra: fuse: move APB DMA into Tegra20 fuse driver
soc/tegra: Add efuse and apbmisc bindings
soc/tegra: Add efuse driver for Tegra
ARM: tegra: move fuse exports to soc/tegra/fuse.h
ARM: tegra: export apb dma readl/writel
ARM: tegra: Use a function to get the chip ID
ARM: tegra: Sort includes alphabetically
ARM: tegra: Move includes to include/soc/tegra
...
Diffstat (limited to 'drivers/video')
-rw-r--r-- | drivers/video/fbdev/Kconfig | 10 | ||||
-rw-r--r-- | drivers/video/fbdev/Makefile | 1 | ||||
-rw-r--r-- | drivers/video/fbdev/amba-clcd-versatile.c | 182 | ||||
-rw-r--r-- | drivers/video/fbdev/s3c-fb.c | 65 |
4 files changed, 191 insertions, 67 deletions
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig index 59c98bfd5a8a..e05a58d759be 100644 --- a/drivers/video/fbdev/Kconfig +++ b/drivers/video/fbdev/Kconfig @@ -290,6 +290,12 @@ config FB_ARMCLCD here and read <file:Documentation/kbuild/modules.txt>. The module will be called amba-clcd. +# Helper logic selected only by the ARM Versatile platform family. +config PLAT_VERSATILE_CLCD + def_bool ARCH_VERSATILE || ARCH_REALVIEW || ARCH_VEXPRESS + depends on ARM + depends on FB_ARMCLCD && FB=y + config FB_ACORN bool "Acorn VIDC support" depends on (FB = y) && ARM && ARCH_ACORN @@ -2018,8 +2024,8 @@ config FB_TMIO_ACCELL config FB_S3C tristate "Samsung S3C framebuffer support" - depends on FB && (CPU_S3C2416 || ARCH_S3C64XX || ARCH_S5P64X0 || \ - ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS) + depends on FB && (CPU_S3C2416 || ARCH_S3C64XX || \ + ARCH_S5PV210 || ARCH_EXYNOS) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile index 0284f2a12538..0b2090d2e52e 100644 --- a/drivers/video/fbdev/Makefile +++ b/drivers/video/fbdev/Makefile @@ -78,6 +78,7 @@ obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o obj-$(CONFIG_FB_PVR2) += pvr2fb.o obj-$(CONFIG_FB_VOODOO1) += sstfb.o obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o +obj-$(CONFIG_PLAT_VERSATILE_CLCD) += amba-clcd-versatile.o obj-$(CONFIG_FB_GOLDFISH) += goldfishfb.o obj-$(CONFIG_FB_68328) += 68328fb.o obj-$(CONFIG_FB_GBE) += gbefb.o diff --git a/drivers/video/fbdev/amba-clcd-versatile.c b/drivers/video/fbdev/amba-clcd-versatile.c new file mode 100644 index 000000000000..7a8afcd4573e --- /dev/null +++ b/drivers/video/fbdev/amba-clcd-versatile.c @@ -0,0 +1,182 @@ +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/amba/bus.h> +#include <linux/amba/clcd.h> +#include <linux/platform_data/video-clcd-versatile.h> + +static struct clcd_panel vga = { + .mode = { + .name = "VGA", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 39721, + .left_margin = 40, + .right_margin = 24, + .upper_margin = 32, + .lower_margin = 11, + .hsync_len = 96, + .vsync_len = 2, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888, + .bpp = 16, +}; + +static struct clcd_panel xvga = { + .mode = { + .name = "XVGA", + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 15748, + .left_margin = 152, + .right_margin = 48, + .upper_margin = 23, + .lower_margin = 3, + .hsync_len = 104, + .vsync_len = 4, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888, + .bpp = 16, +}; + +/* Sanyo TM38QV67A02A - 3.8 inch QVGA (320x240) Color TFT */ +static struct clcd_panel sanyo_tm38qv67a02a = { + .mode = { + .name = "Sanyo TM38QV67A02A", + .refresh = 116, + .xres = 320, + .yres = 240, + .pixclock = 100000, + .left_margin = 6, + .right_margin = 6, + .upper_margin = 5, + .lower_margin = 5, + .hsync_len = 6, + .vsync_len = 6, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD, + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551, + .bpp = 16, +}; + +static struct clcd_panel sanyo_2_5_in = { + .mode = { + .name = "Sanyo QVGA Portrait", + .refresh = 116, + .xres = 240, + .yres = 320, + .pixclock = 100000, + .left_margin = 20, + .right_margin = 10, + .upper_margin = 2, + .lower_margin = 2, + .hsync_len = 10, + .vsync_len = 2, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_IVS | TIM2_IHS | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551, + .bpp = 16, +}; + +/* Epson L2F50113T00 - 2.2 inch 176x220 Color TFT */ +static struct clcd_panel epson_l2f50113t00 = { + .mode = { + .name = "Epson L2F50113T00", + .refresh = 390, + .xres = 176, + .yres = 220, + .pixclock = 62500, + .left_margin = 3, + .right_margin = 2, + .upper_margin = 1, + .lower_margin = 0, + .hsync_len = 3, + .vsync_len = 2, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551, + .bpp = 16, +}; + +static struct clcd_panel *panels[] = { + &vga, + &xvga, + &sanyo_tm38qv67a02a, + &sanyo_2_5_in, + &epson_l2f50113t00, +}; + +struct clcd_panel *versatile_clcd_get_panel(const char *name) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(panels); i++) + if (strcmp(panels[i]->mode.name, name) == 0) + break; + + if (i < ARRAY_SIZE(panels)) + return panels[i]; + + pr_err("CLCD: couldn't get parameters for panel %s\n", name); + + return NULL; +} + +int versatile_clcd_setup_dma(struct clcd_fb *fb, unsigned long framesize) +{ + dma_addr_t dma; + + fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, + &dma, GFP_KERNEL); + if (!fb->fb.screen_base) { + pr_err("CLCD: unable to map framebuffer\n"); + return -ENOMEM; + } + + fb->fb.fix.smem_start = dma; + fb->fb.fix.smem_len = framesize; + + return 0; +} + +int versatile_clcd_mmap_dma(struct clcd_fb *fb, struct vm_area_struct *vma) +{ + return dma_mmap_writecombine(&fb->dev->dev, vma, + fb->fb.screen_base, + fb->fb.fix.smem_start, + fb->fb.fix.smem_len); +} + +void versatile_clcd_remove_dma(struct clcd_fb *fb) +{ + dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, + fb->fb.screen_base, fb->fb.fix.smem_start); +} diff --git a/drivers/video/fbdev/s3c-fb.c b/drivers/video/fbdev/s3c-fb.c index 62acae2694a9..b33abb0a433d 100644 --- a/drivers/video/fbdev/s3c-fb.c +++ b/drivers/video/fbdev/s3c-fb.c @@ -1805,38 +1805,6 @@ static struct s3c_fb_driverdata s3c_fb_data_64xx = { .win[4] = &s3c_fb_data_64xx_wins[4], }; -static struct s3c_fb_driverdata s3c_fb_data_s5pc100 = { - .variant = { - .nr_windows = 5, - .vidtcon = VIDTCON0, - .wincon = WINCON(0), - .winmap = WINxMAP(0), - .keycon = WKEYCON, - .osd = VIDOSD_BASE, - .osd_stride = 16, - .buf_start = VIDW_BUF_START(0), - .buf_size = VIDW_BUF_SIZE(0), - .buf_end = VIDW_BUF_END(0), - - .palette = { - [0] = 0x2400, - [1] = 0x2800, - [2] = 0x2c00, - [3] = 0x3000, - [4] = 0x3400, - }, - - .has_prtcon = 1, - .has_blendcon = 1, - .has_clksel = 1, - }, - .win[0] = &s3c_fb_data_s5p_wins[0], - .win[1] = &s3c_fb_data_s5p_wins[1], - .win[2] = &s3c_fb_data_s5p_wins[2], - .win[3] = &s3c_fb_data_s5p_wins[3], - .win[4] = &s3c_fb_data_s5p_wins[4], -}; - static struct s3c_fb_driverdata s3c_fb_data_s5pv210 = { .variant = { .nr_windows = 5, @@ -1970,41 +1938,11 @@ static struct s3c_fb_driverdata s3c_fb_data_s3c2443 = { }, }; -static struct s3c_fb_driverdata s3c_fb_data_s5p64x0 = { - .variant = { - .nr_windows = 3, - .vidtcon = VIDTCON0, - .wincon = WINCON(0), - .winmap = WINxMAP(0), - .keycon = WKEYCON, - .osd = VIDOSD_BASE, - .osd_stride = 16, - .buf_start = VIDW_BUF_START(0), - .buf_size = VIDW_BUF_SIZE(0), - .buf_end = VIDW_BUF_END(0), - - .palette = { - [0] = 0x2400, - [1] = 0x2800, - [2] = 0x2c00, - }, - - .has_blendcon = 1, - .has_fixvclk = 1, - }, - .win[0] = &s3c_fb_data_s5p_wins[0], - .win[1] = &s3c_fb_data_s5p_wins[1], - .win[2] = &s3c_fb_data_s5p_wins[2], -}; - static struct platform_device_id s3c_fb_driver_ids[] = { { .name = "s3c-fb", .driver_data = (unsigned long)&s3c_fb_data_64xx, }, { - .name = "s5pc100-fb", - .driver_data = (unsigned long)&s3c_fb_data_s5pc100, - }, { .name = "s5pv210-fb", .driver_data = (unsigned long)&s3c_fb_data_s5pv210, }, { @@ -2016,9 +1954,6 @@ static struct platform_device_id s3c_fb_driver_ids[] = { }, { .name = "s3c2443-fb", .driver_data = (unsigned long)&s3c_fb_data_s3c2443, - }, { - .name = "s5p64x0-fb", - .driver_data = (unsigned long)&s3c_fb_data_s5p64x0, }, {}, }; |