Merge tag 'fbdev-reorder-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull fbdev renaming patches from Tomi Valkeinen:
 "Reorder drivers/video/ directory so that all fbdev drivers are now
  located in drivers/video/fbdev/ and the fbdev framework core files are
  located in drivers/video/fbdev/core/

  The drivers/video/Kconfig is modified so that the DRM and the fbdev
  menu options are in separate submenus, instead of both being mixed in
  the same 'Graphics support' menu level"

* tag 'fbdev-reorder-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  video: Kconfig: move drm and fb into separate menus
  fbdev: move fbdev core files to separate directory
  video: move fbdev to drivers/video/fbdev

1 files changed, 581 insertions, 0 deletions

diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
new file mode 100644
index 000000000000..f4daa59f0a80
--- /dev/null
+++ b/drivers/video/fbdev/ssd1307fb.c
@@ -0,0 +1,581 @@
+/*
+ * Driver for the Solomon SSD1307 OLED controller
+ *
+ * Copyright 2012 Free Electrons
+ *
+ * Licensed under the GPLv2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/uaccess.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/pwm.h>
+#include <linux/delay.h>
+
+#define SSD1307FB_DATA			0x40
+#define SSD1307FB_COMMAND		0x80
+
+#define SSD1307FB_SET_ADDRESS_MODE	0x20
+#define SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL	(0x00)
+#define SSD1307FB_SET_ADDRESS_MODE_VERTICAL	(0x01)
+#define SSD1307FB_SET_ADDRESS_MODE_PAGE		(0x02)
+#define SSD1307FB_SET_COL_RANGE		0x21
+#define SSD1307FB_SET_PAGE_RANGE	0x22
+#define SSD1307FB_CONTRAST		0x81
+#define	SSD1307FB_CHARGE_PUMP		0x8d
+#define SSD1307FB_SEG_REMAP_ON		0xa1
+#define SSD1307FB_DISPLAY_OFF		0xae
+#define SSD1307FB_SET_MULTIPLEX_RATIO	0xa8
+#define SSD1307FB_DISPLAY_ON		0xaf
+#define SSD1307FB_START_PAGE_ADDRESS	0xb0
+#define SSD1307FB_SET_DISPLAY_OFFSET	0xd3
+#define	SSD1307FB_SET_CLOCK_FREQ	0xd5
+#define	SSD1307FB_SET_PRECHARGE_PERIOD	0xd9
+#define	SSD1307FB_SET_COM_PINS_CONFIG	0xda
+#define	SSD1307FB_SET_VCOMH		0xdb
+
+struct ssd1307fb_par;
+
+struct ssd1307fb_ops {
+	int (*init)(struct ssd1307fb_par *);
+	int (*remove)(struct ssd1307fb_par *);
+};
+
+struct ssd1307fb_par {
+	struct i2c_client *client;
+	u32 height;
+	struct fb_info *info;
+	struct ssd1307fb_ops *ops;
+	u32 page_offset;
+	struct pwm_device *pwm;
+	u32 pwm_period;
+	int reset;
+	u32 width;
+};
+
+struct ssd1307fb_array {
+	u8	type;
+	u8	data[0];
+};
+
+static struct fb_fix_screeninfo ssd1307fb_fix = {
+	.id		= "Solomon SSD1307",
+	.type		= FB_TYPE_PACKED_PIXELS,
+	.visual		= FB_VISUAL_MONO10,
+	.xpanstep	= 0,
+	.ypanstep	= 0,
+	.ywrapstep	= 0,
+	.accel		= FB_ACCEL_NONE,
+};
+
+static struct fb_var_screeninfo ssd1307fb_var = {
+	.bits_per_pixel	= 1,
+};
+
+static struct ssd1307fb_array *ssd1307fb_alloc_array(u32 len, u8 type)
+{
+	struct ssd1307fb_array *array;
+
+	array = kzalloc(sizeof(struct ssd1307fb_array) + len, GFP_KERNEL);
+	if (!array)
+		return NULL;
+
+	array->type = type;
+
+	return array;
+}
+
+static int ssd1307fb_write_array(struct i2c_client *client,
+				 struct ssd1307fb_array *array, u32 len)
+{
+	int ret;
+
+	len += sizeof(struct ssd1307fb_array);
+
+	ret = i2c_master_send(client, (u8 *)array, len);
+	if (ret != len) {
+		dev_err(&client->dev, "Couldn't send I2C command.\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static inline int ssd1307fb_write_cmd(struct i2c_client *client, u8 cmd)
+{
+	struct ssd1307fb_array *array;
+	int ret;
+
+	array = ssd1307fb_alloc_array(1, SSD1307FB_COMMAND);
+	if (!array)
+		return -ENOMEM;
+
+	array->data[0] = cmd;
+
+	ret = ssd1307fb_write_array(client, array, 1);
+	kfree(array);
+
+	return ret;
+}
+
+static inline int ssd1307fb_write_data(struct i2c_client *client, u8 data)
+{
+	struct ssd1307fb_array *array;
+	int ret;
+
+	array = ssd1307fb_alloc_array(1, SSD1307FB_DATA);
+	if (!array)
+		return -ENOMEM;
+
+	array->data[0] = data;
+
+	ret = ssd1307fb_write_array(client, array, 1);
+	kfree(array);
+
+	return ret;
+}
+
+static void ssd1307fb_update_display(struct ssd1307fb_par *par)
+{
+	struct ssd1307fb_array *array;
+	u8 *vmem = par->info->screen_base;
+	int i, j, k;
+
+	array = ssd1307fb_alloc_array(par->width * par->height / 8,
+				      SSD1307FB_DATA);
+	if (!array)
+		return;
+
+	/*
+	 * The screen is divided in pages, each having a height of 8
+	 * pixels, and the width of the screen. When sending a byte of
+	 * data to the controller, it gives the 8 bits for the current
+	 * column. I.e, the first byte are the 8 bits of the first
+	 * column, then the 8 bits for the second column, etc.
+	 *
+	 *
+	 * Representation of the screen, assuming it is 5 bits
+	 * wide. Each letter-number combination is a bit that controls
+	 * one pixel.
+	 *
+	 * A0 A1 A2 A3 A4
+	 * B0 B1 B2 B3 B4
+	 * C0 C1 C2 C3 C4
+	 * D0 D1 D2 D3 D4
+	 * E0 E1 E2 E3 E4
+	 * F0 F1 F2 F3 F4
+	 * G0 G1 G2 G3 G4
+	 * H0 H1 H2 H3 H4
+	 *
+	 * If you want to update this screen, you need to send 5 bytes:
+	 *  (1) A0 B0 C0 D0 E0 F0 G0 H0
+	 *  (2) A1 B1 C1 D1 E1 F1 G1 H1
+	 *  (3) A2 B2 C2 D2 E2 F2 G2 H2
+	 *  (4) A3 B3 C3 D3 E3 F3 G3 H3
+	 *  (5) A4 B4 C4 D4 E4 F4 G4 H4
+	 */
+
+	for (i = 0; i < (par->height / 8); i++) {
+		for (j = 0; j < par->width; j++) {
+			u32 array_idx = i * par->width + j;
+			array->data[array_idx] = 0;
+			for (k = 0; k < 8; k++) {
+				u32 page_length = par->width * i;
+				u32 index = page_length + (par->width * k + j) / 8;
+				u8 byte = *(vmem + index);
+				u8 bit = byte & (1 << (j % 8));
+				bit = bit >> (j % 8);
+				array->data[array_idx] |= bit << k;
+			}
+		}
+	}
+
+	ssd1307fb_write_array(par->client, array, par->width * par->height / 8);
+	kfree(array);
+}
+
+
+static ssize_t ssd1307fb_write(struct fb_info *info, const char __user *buf,
+		size_t count, loff_t *ppos)
+{
+	struct ssd1307fb_par *par = info->par;
+	unsigned long total_size;
+	unsigned long p = *ppos;
+	u8 __iomem *dst;
+
+	total_size = info->fix.smem_len;
+
+	if (p > total_size)
+		return -EINVAL;
+
+	if (count + p > total_size)
+		count = total_size - p;
+
+	if (!count)
+		return -EINVAL;
+
+	dst = (void __force *) (info->screen_base + p);
+
+	if (copy_from_user(dst, buf, count))
+		return -EFAULT;
+
+	ssd1307fb_update_display(par);
+
+	*ppos += count;
+
+	return count;
+}
+
+static void ssd1307fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
+{
+	struct ssd1307fb_par *par = info->par;
+	sys_fillrect(info, rect);
+	ssd1307fb_update_display(par);
+}
+
+static void ssd1307fb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
+{
+	struct ssd1307fb_par *par = info->par;
+	sys_copyarea(info, area);
+	ssd1307fb_update_display(par);
+}
+
+static void ssd1307fb_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+	struct ssd1307fb_par *par = info->par;
+	sys_imageblit(info, image);
+	ssd1307fb_update_display(par);
+}
+
+static struct fb_ops ssd1307fb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_read	= fb_sys_read,
+	.fb_write	= ssd1307fb_write,
+	.fb_fillrect	= ssd1307fb_fillrect,
+	.fb_copyarea	= ssd1307fb_copyarea,
+	.fb_imageblit	= ssd1307fb_imageblit,
+};
+
+static void ssd1307fb_deferred_io(struct fb_info *info,
+				struct list_head *pagelist)
+{
+	ssd1307fb_update_display(info->par);
+}
+
+static struct fb_deferred_io ssd1307fb_defio = {
+	.delay		= HZ,
+	.deferred_io	= ssd1307fb_deferred_io,
+};
+
+static int ssd1307fb_ssd1307_init(struct ssd1307fb_par *par)
+{
+	int ret;
+
+	par->pwm = pwm_get(&par->client->dev, NULL);
+	if (IS_ERR(par->pwm)) {
+		dev_err(&par->client->dev, "Could not get PWM from device tree!\n");
+		return PTR_ERR(par->pwm);
+	}
+
+	par->pwm_period = pwm_get_period(par->pwm);
+	/* Enable the PWM */
+	pwm_config(par->pwm, par->pwm_period / 2, par->pwm_period);
+	pwm_enable(par->pwm);
+
+	dev_dbg(&par->client->dev, "Using PWM%d with a %dns period.\n",
+		par->pwm->pwm, par->pwm_period);
+
+	/* Map column 127 of the OLED to segment 0 */
+	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SEG_REMAP_ON);
+	if (ret < 0)
+		return ret;
+
+	/* Turn on the display */
+	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_ON);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int ssd1307fb_ssd1307_remove(struct ssd1307fb_par *par)
+{
+	pwm_disable(par->pwm);
+	pwm_put(par->pwm);
+	return 0;
+}
+
+static struct ssd1307fb_ops ssd1307fb_ssd1307_ops = {
+	.init	= ssd1307fb_ssd1307_init,
+	.remove	= ssd1307fb_ssd1307_remove,
+};
+
+static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
+{
+	int ret;
+
+	/* Set initial contrast */
+	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CONTRAST);
+	ret = ret & ssd1307fb_write_cmd(par->client, 0x7f);
+	if (ret < 0)
+		return ret;
+
+	/* Set COM direction */
+	ret = ssd1307fb_write_cmd(par->client, 0xc8);
+	if (ret < 0)
+		return ret;
+
+	/* Set segment re-map */
+	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SEG_REMAP_ON);
+	if (ret < 0)
+		return ret;
+
+	/* Set multiplex ratio value */
+	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_MULTIPLEX_RATIO);
+	ret = ret & ssd1307fb_write_cmd(par->client, par->height - 1);
+	if (ret < 0)
+		return ret;
+
+	/* set display offset value */
+	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_DISPLAY_OFFSET);
+	ret = ssd1307fb_write_cmd(par->client, 0x20);
+	if (ret < 0)
+		return ret;
+
+	/* Set clock frequency */
+	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_CLOCK_FREQ);
+	ret = ret & ssd1307fb_write_cmd(par->client, 0xf0);
+	if (ret < 0)
+		return ret;
+
+	/* Set precharge period in number of ticks from the internal clock */
+	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PRECHARGE_PERIOD);
+	ret = ret & ssd1307fb_write_cmd(par->client, 0x22);
+	if (ret < 0)
+		return ret;
+
+	/* Set COM pins configuration */
+	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COM_PINS_CONFIG);
+	ret = ret & ssd1307fb_write_cmd(par->client, 0x22);
+	if (ret < 0)
+		return ret;
+
+	/* Set VCOMH */
+	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_VCOMH);
+	ret = ret & ssd1307fb_write_cmd(par->client, 0x49);
+	if (ret < 0)
+		return ret;
+
+	/* Turn on the DC-DC Charge Pump */
+	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CHARGE_PUMP);
+	ret = ret & ssd1307fb_write_cmd(par->client, 0x14);
+	if (ret < 0)
+		return ret;
+
+	/* Switch to horizontal addressing mode */
+	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_ADDRESS_MODE);
+	ret = ret & ssd1307fb_write_cmd(par->client,
+					SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COL_RANGE);
+	ret = ret & ssd1307fb_write_cmd(par->client, 0x0);
+	ret = ret & ssd1307fb_write_cmd(par->client, par->width - 1);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PAGE_RANGE);
+	ret = ret & ssd1307fb_write_cmd(par->client, 0x0);
+	ret = ret & ssd1307fb_write_cmd(par->client,
+					par->page_offset + (par->height / 8) - 1);
+	if (ret < 0)
+		return ret;
+
+	/* Turn on the display */
+	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_ON);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static struct ssd1307fb_ops ssd1307fb_ssd1306_ops = {
+	.init	= ssd1307fb_ssd1306_init,
+};
+
+static const struct of_device_id ssd1307fb_of_match[] = {
+	{
+		.compatible = "solomon,ssd1306fb-i2c",
+		.data = (void *)&ssd1307fb_ssd1306_ops,
+	},
+	{
+		.compatible = "solomon,ssd1307fb-i2c",
+		.data = (void *)&ssd1307fb_ssd1307_ops,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, ssd1307fb_of_match);
+
+static int ssd1307fb_probe(struct i2c_client *client,
+			   const struct i2c_device_id *id)
+{
+	struct fb_info *info;
+	struct device_node *node = client->dev.of_node;
+	u32 vmem_size;
+	struct ssd1307fb_par *par;
+	u8 *vmem;
+	int ret;
+
+	if (!node) {
+		dev_err(&client->dev, "No device tree data found!\n");
+		return -EINVAL;
+	}
+
+	info = framebuffer_alloc(sizeof(struct ssd1307fb_par), &client->dev);
+	if (!info) {
+		dev_err(&client->dev, "Couldn't allocate framebuffer.\n");
+		return -ENOMEM;
+	}
+
+	par = info->par;
+	par->info = info;
+	par->client = client;
+
+	par->ops = (struct ssd1307fb_ops *)of_match_device(ssd1307fb_of_match,
+							   &client->dev)->data;
+
+	par->reset = of_get_named_gpio(client->dev.of_node,
+					 "reset-gpios", 0);
+	if (!gpio_is_valid(par->reset)) {
+		ret = -EINVAL;
+		goto fb_alloc_error;
+	}
+
+	if (of_property_read_u32(node, "solomon,width", &par->width))
+		par->width = 96;
+
+	if (of_property_read_u32(node, "solomon,height", &par->height))
+		par->width = 16;
+
+	if (of_property_read_u32(node, "solomon,page-offset", &par->page_offset))
+		par->page_offset = 1;
+
+	vmem_size = par->width * par->height / 8;
+
+	vmem = devm_kzalloc(&client->dev, vmem_size, GFP_KERNEL);
+	if (!vmem) {
+		dev_err(&client->dev, "Couldn't allocate graphical memory.\n");
+		ret = -ENOMEM;
+		goto fb_alloc_error;
+	}
+
+	info->fbops = &ssd1307fb_ops;
+	info->fix = ssd1307fb_fix;
+	info->fix.line_length = par->width / 8;
+	info->fbdefio = &ssd1307fb_defio;
+
+	info->var = ssd1307fb_var;
+	info->var.xres = par->width;
+	info->var.xres_virtual = par->width;
+	info->var.yres = par->height;
+	info->var.yres_virtual = par->height;
+
+	info->var.red.length = 1;
+	info->var.red.offset = 0;
+	info->var.green.length = 1;
+	info->var.green.offset = 0;
+	info->var.blue.length = 1;
+	info->var.blue.offset = 0;
+
+	info->screen_base = (u8 __force __iomem *)vmem;
+	info->fix.smem_start = (unsigned long)vmem;
+	info->fix.smem_len = vmem_size;
+
+	fb_deferred_io_init(info);
+
+	ret = devm_gpio_request_one(&client->dev, par->reset,
+				    GPIOF_OUT_INIT_HIGH,
+				    "oled-reset");
+	if (ret) {
+		dev_err(&client->dev,
+			"failed to request gpio %d: %d\n",
+			par->reset, ret);
+		goto reset_oled_error;
+	}
+
+	i2c_set_clientdata(client, info);
+
+	/* Reset the screen */
+	gpio_set_value(par->reset, 0);
+	udelay(4);
+	gpio_set_value(par->reset, 1);
+	udelay(4);
+
+	if (par->ops->init) {
+		ret = par->ops->init(par);
+		if (ret)
+			goto reset_oled_error;
+	}
+
+	ret = register_framebuffer(info);
+	if (ret) {
+		dev_err(&client->dev, "Couldn't register the framebuffer\n");
+		goto panel_init_error;
+	}
+
+	dev_info(&client->dev, "fb%d: %s framebuffer device registered, using %d bytes of video memory\n", info->node, info->fix.id, vmem_size);
+
+	return 0;
+
+panel_init_error:
+	if (par->ops->remove)
+		par->ops->remove(par);
+reset_oled_error:
+	fb_deferred_io_cleanup(info);
+fb_alloc_error:
+	framebuffer_release(info);
+	return ret;
+}
+
+static int ssd1307fb_remove(struct i2c_client *client)
+{
+	struct fb_info *info = i2c_get_clientdata(client);
+	struct ssd1307fb_par *par = info->par;
+
+	unregister_framebuffer(info);
+	if (par->ops->remove)
+		par->ops->remove(par);
+	fb_deferred_io_cleanup(info);
+	framebuffer_release(info);
+
+	return 0;
+}
+
+static const struct i2c_device_id ssd1307fb_i2c_id[] = {
+	{ "ssd1306fb", 0 },
+	{ "ssd1307fb", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ssd1307fb_i2c_id);
+
+static struct i2c_driver ssd1307fb_driver = {
+	.probe = ssd1307fb_probe,
+	.remove = ssd1307fb_remove,
+	.id_table = ssd1307fb_i2c_id,
+	.driver = {
+		.name = "ssd1307fb",
+		.of_match_table = ssd1307fb_of_match,
+		.owner = THIS_MODULE,
+	},
+};
+
+module_i2c_driver(ssd1307fb_driver);
+
+MODULE_DESCRIPTION("FB driver for the Solomon SSD1307 OLED controller");
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
+MODULE_LICENSE("GPL");