summaryrefslogtreecommitdiffstats
path: root/drivers/uwb
diff options
context:
space:
mode:
authorAnderson Lizardo <anderson.lizardo@indt.org.br>2008-09-17 16:34:37 +0100
committerDavid Vrabel <dv02@dv02pc01.europe.root.pri>2008-09-17 16:54:34 +0100
commit8c7e8cb85557cc500122f3e489936582b7d11a7c (patch)
tree71f197bb90549f04cb28720592cfa20d285f8fae /drivers/uwb
parentfa21183326882a886ecf74cfebcfb479d56e8469 (diff)
downloadlinux-8c7e8cb85557cc500122f3e489936582b7d11a7c.tar.bz2
uwb: i1480: remove MAC/PHY information checking function
Some hardware/firmware combinations (most notably an IOGear HWA using the i1480 firmware) kill the host controller after issuing a GET_MAC_PHY_INFO command. Removing this check seems harmless otherwise. The patch fixes the issue where the HC is killed, showing the message: ehci_hcd 0000:00:1d.7: HC died; cleaning up After this error, USB comes back only after reloading the ehci_hcd module. Signed-off-by: Anderson Lizardo <anderson.lizardo@indt.org.br> Signed-off-by: David Vrabel <david.vrabel@csr.com>
Diffstat (limited to 'drivers/uwb')
-rw-r--r--drivers/uwb/i1480/dfu/dfu.c102
-rw-r--r--drivers/uwb/i1480/dfu/i1480-dfu.h3
2 files changed, 4 insertions, 101 deletions
diff --git a/drivers/uwb/i1480/dfu/dfu.c b/drivers/uwb/i1480/dfu/dfu.c
index ebffaf542153..aec4146757da 100644
--- a/drivers/uwb/i1480/dfu/dfu.c
+++ b/drivers/uwb/i1480/dfu/dfu.c
@@ -127,98 +127,6 @@ error:
EXPORT_SYMBOL_GPL(i1480_cmd);
-/**
- * Get information about the MAC and PHY
- *
- * @wa: Wired adaptor
- * @neh: Notification/event handler
- * @reply: Pointer to the reply event buffer
- * @returns: 0 if ok, < 0 errno code on error.
- */
-static
-int i1480_cmd_get_mac_phy_info(struct i1480 *i1480)
-{
- int result;
- struct uwb_rccb *cmd = i1480->cmd_buf;
- struct i1480_evt_confirm_GMPI *reply = i1480->evt_buf;
-
- cmd->bCommandType = i1480_CET_VS1;
- cmd->wCommand = cpu_to_le16(i1480_CMD_GET_MAC_PHY_INFO);
- reply->rceb.bEventType = i1480_CET_VS1;
- reply->rceb.wEvent = i1480_EVT_GET_MAC_PHY_INFO;
- result = i1480_cmd(i1480, "GET_MAC_PHY_INFO", sizeof(*cmd),
- sizeof(*reply));
- if (result < 0)
- goto out;
- if (le16_to_cpu(reply->status) != 0x00) {
- dev_err(i1480->dev,
- "GET_MAC_PHY_INFO: command execution failed: %d\n",
- reply->status);
- result = -EIO;
- }
-out:
- return result;
-}
-
-
-/**
- * Get i1480's info and print it
- *
- * @wa: Wire Adapter
- * @neh: Notification/event handler
- * @returns: 0 if ok, < 0 errno code on error.
- */
-static
-int i1480_check_info(struct i1480 *i1480)
-{
- struct i1480_evt_confirm_GMPI *reply = i1480->evt_buf;
- int result;
- unsigned mac_fw_rev;
-#if i1480_FW <= 0x00000302
- unsigned phy_fw_rev;
-#endif
- if (i1480->quirk_no_check_info) {
- dev_err(i1480->dev, "firmware info check disabled\n");
- return 0;
- }
-
- result = i1480_cmd_get_mac_phy_info(i1480);
- if (result < 0) {
- dev_err(i1480->dev, "Cannot get MAC & PHY information: %d\n",
- result);
- goto out;
- }
- mac_fw_rev = le16_to_cpu(reply->mac_fw_rev);
-#if i1480_FW > 0x00000302
- dev_info(i1480->dev,
- "HW v%02hx "
- "MAC FW v%02hx.%02hx caps %04hx "
- "PHY type %02hx v%02hx caps %02hx %02hx %02hx\n",
- reply->hw_rev, mac_fw_rev >> 8, mac_fw_rev & 0xff,
- le16_to_cpu(reply->mac_caps),
- reply->phy_vendor, reply->phy_rev,
- reply->phy_caps[0], reply->phy_caps[1], reply->phy_caps[2]);
-#else
- phy_fw_rev = le16_to_cpu(reply->phy_fw_rev);
- dev_info(i1480->dev, "MAC FW v%02hx.%02hx caps %04hx "
- " PHY FW v%02hx.%02hx caps %04hx\n",
- mac_fw_rev >> 8, mac_fw_rev & 0xff,
- le16_to_cpu(reply->mac_caps),
- phy_fw_rev >> 8, phy_fw_rev & 0xff,
- le16_to_cpu(reply->phy_caps));
-#endif
- dev_dbg(i1480->dev,
- "key-stores:%hu mcast-addr-stores:%hu sec-modes:%hu\n",
- (unsigned short) reply->key_stores,
- le16_to_cpu(reply->mcast_addr_stores),
- (unsigned short) reply->sec_mode_supported);
- /* FIXME: complain if fw version too low -- pending for
- * numbering to stabilize */
-out:
- return result;
-}
-
-
static
int i1480_print_state(struct i1480 *i1480)
{
@@ -264,12 +172,10 @@ int i1480_fw_upload(struct i1480 *i1480)
i1480_print_state(i1480);
goto error_rc_release;
}
- result = i1480_check_info(i1480);
- if (result < 0) {
- dev_warn(i1480->dev, "Warning! Cannot check firmware info: %d\n",
- result);
- result = 0;
- }
+ /*
+ * FIXME: find some reliable way to check whether firmware is running
+ * properly. Maybe use some standard request that has no side effects?
+ */
dev_info(i1480->dev, "firmware uploaded successfully\n");
error_rc_release:
if (i1480->rc_release)
diff --git a/drivers/uwb/i1480/dfu/i1480-dfu.h b/drivers/uwb/i1480/dfu/i1480-dfu.h
index 4103b287ac71..8035418de132 100644
--- a/drivers/uwb/i1480/dfu/i1480-dfu.h
+++ b/drivers/uwb/i1480/dfu/i1480-dfu.h
@@ -56,7 +56,6 @@
* request_firmware()
* i1480_mpi_write()
* i1480->cmd() [i1480_{usb,pci}_cmd()]
- * i1480_check_info()
*
* Once the probe function enumerates the device and uploads the
* firmware, we just exit with -ENODEV, as we don't really want to
@@ -130,8 +129,6 @@ struct i1480 {
void *evt_buf, *cmd_buf;
ssize_t evt_result;
struct completion evt_complete;
-
- u8 quirk_no_check_info:1;
};
static inline