summaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
authorMasahiro Yamada <masahiroy@kernel.org>2020-06-14 01:50:22 +0900
committerMasahiro Yamada <masahiroy@kernel.org>2020-06-14 01:57:21 +0900
commita7f7f6248d9740d710fd6bd190293fe5e16410ac (patch)
treedc59d36a552f7e25f909f5b2edc83f96c013befa /drivers/usb
parente4a42c82e943b97ce124539fcd7a47445b43fa0d (diff)
downloadlinux-a7f7f6248d9740d710fd6bd190293fe5e16410ac.tar.bz2
treewide: replace '---help---' in Kconfig files with 'help'
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/Kconfig8
-rw-r--r--drivers/usb/class/Kconfig4
-rw-r--r--drivers/usb/host/Kconfig90
-rw-r--r--drivers/usb/image/Kconfig2
-rw-r--r--drivers/usb/misc/Kconfig4
-rw-r--r--drivers/usb/misc/sisusbvga/Kconfig4
-rw-r--r--drivers/usb/serial/Kconfig30
-rw-r--r--drivers/usb/storage/Kconfig8
-rw-r--r--drivers/usb/usbip/Kconfig14
9 files changed, 82 insertions, 82 deletions
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 275568abc670..26475b409b53 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -30,7 +30,7 @@ menuconfig USB_SUPPORT
bool "USB support"
depends on HAS_IOMEM
default y
- ---help---
+ help
This option adds core support for Universal Serial Bus (USB).
You will also need drivers from the following menu to make use of it.
@@ -47,7 +47,7 @@ config USB
select GENERIC_ALLOCATOR
select USB_COMMON
select NLS # for UTF-8 strings
- ---help---
+ help
Universal Serial Bus (USB) is a specification for a serial bus
subsystem which offers higher speeds and more features than the
traditional PC serial port. The bus supplies power to peripherals
@@ -83,7 +83,7 @@ config USB_PCI
bool "PCI based USB host interface"
depends on PCI
default y
- ---help---
+ help
Many embedded system SOCs (e.g. freescale T2080) have both
PCI and USB modules with the USB module directly controlled by
registers and having no relationship to the PCI module.
@@ -133,7 +133,7 @@ config USB_USS720
tristate "USS720 parport driver"
depends on PARPORT
select PARPORT_NOT_PC
- ---help---
+ help
This driver is for USB parallel port adapters that use the Lucent
Technologies USS-720 chip. These cables are plugged into your USB
port and provide USB compatibility to peripherals designed with
diff --git a/drivers/usb/class/Kconfig b/drivers/usb/class/Kconfig
index f8a798900093..d3f5162bd67e 100644
--- a/drivers/usb/class/Kconfig
+++ b/drivers/usb/class/Kconfig
@@ -7,7 +7,7 @@ comment "USB Device Class drivers"
config USB_ACM
tristate "USB Modem (CDC ACM) support"
depends on TTY
- ---help---
+ help
This driver supports USB modems and ISDN adapters which support the
Communication Device Class Abstract Control Model interface.
Please read <file:Documentation/usb/acm.rst> for details.
@@ -30,7 +30,7 @@ config USB_PRINTER
config USB_WDM
tristate "USB Wireless Device Management support"
- ---help---
+ help
This driver supports the WMC Device Management functionality
of cell phones compliant to the CDC WMC specification. You can use
AT commands over this device.
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 62c348062e48..1cb3004ea7b2 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -20,7 +20,7 @@ config USB_C67X00_HCD
config USB_XHCI_HCD
tristate "xHCI HCD (USB 3.0) support"
depends on HAS_DMA && HAS_IOMEM
- ---help---
+ help
The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
"SuperSpeed" host controller hardware.
@@ -31,7 +31,7 @@ if USB_XHCI_HCD
config USB_XHCI_DBGCAP
bool "xHCI support for debug capability"
depends on TTY
- ---help---
+ help
Say 'Y' to enable the support for the xHCI debug capability. Make
sure that your xHCI host supports the extended debug capability and
you want a TTY serial device based on the xHCI debug capability
@@ -45,7 +45,7 @@ config USB_XHCI_PCI
config USB_XHCI_PCI_RENESAS
tristate "Support for additional Renesas xHCI controller with firwmare"
- ---help---
+ help
Say 'Y' to enable the support for the Renesas xHCI controller with
firwmare. Make sure you have the firwmare for the device and
installed on your system for this device to work.
@@ -54,7 +54,7 @@ config USB_XHCI_PCI_RENESAS
config USB_XHCI_PLATFORM
tristate "Generic xHCI driver for a platform device"
select USB_XHCI_RCAR if ARCH_RENESAS
- ---help---
+ help
Adds an xHCI host driver for a generic platform device, which
provides a memory space and an irq.
It is also a prerequisite for platform specific drivers that
@@ -73,7 +73,7 @@ config USB_XHCI_MTK
tristate "xHCI support for MediaTek SoCs"
select MFD_SYSCON
depends on (MIPS && SOC_MT7621) || ARCH_MEDIATEK || COMPILE_TEST
- ---help---
+ help
Say 'Y' to enable the support for the xHCI host controller
found in MediaTek SoCs.
If unsure, say N.
@@ -83,7 +83,7 @@ config USB_XHCI_MVEBU
select USB_XHCI_PLATFORM
depends on HAS_IOMEM
depends on ARCH_MVEBU || COMPILE_TEST
- ---help---
+ help
Say 'Y' to enable the support for the xHCI host controller
found in Marvell Armada 375/38x/37xx ARM SOCs.
@@ -91,7 +91,7 @@ config USB_XHCI_RCAR
tristate "xHCI support for Renesas R-Car SoCs"
depends on USB_XHCI_PLATFORM
depends on ARCH_RENESAS || COMPILE_TEST
- ---help---
+ help
Say 'Y' to enable the support for the xHCI host controller
found in Renesas R-Car ARM SoCs.
@@ -100,7 +100,7 @@ config USB_XHCI_TEGRA
depends on PHY_TEGRA_XUSB
depends on RESET_CONTROLLER
select FW_LOADER
- ---help---
+ help
Say 'Y' to enable the support for the xHCI host controller
found in NVIDIA Tegra124 and later SoCs.
@@ -129,7 +129,7 @@ config USB_BRCMSTB
config USB_EHCI_HCD
tristate "EHCI HCD (USB 2.0) support"
depends on HAS_DMA && HAS_IOMEM
- ---help---
+ help
The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
"high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
If your USB host controller supports USB 2.0, you will likely want to
@@ -151,7 +151,7 @@ config USB_EHCI_HCD
config USB_EHCI_ROOT_HUB_TT
bool "Root Hub Transaction Translators"
depends on USB_EHCI_HCD
- ---help---
+ help
Some EHCI chips have vendor-specific extensions to integrate
transaction translators, so that no OHCI or UHCI companion
controller is needed. It's safe to say "y" even if your
@@ -164,7 +164,7 @@ config USB_EHCI_TT_NEWSCHED
bool "Improved Transaction Translator scheduling"
depends on USB_EHCI_HCD
default y
- ---help---
+ help
This changes the periodic scheduling code to fill more of the low
and full speed bandwidth available from the Transaction Translator
(TT) in USB 2.0 hubs. Without this, only one transfer will be
@@ -192,7 +192,7 @@ config USB_EHCI_HCD_PMC_MSP
depends on MSP_HAS_USB
select USB_EHCI_BIG_ENDIAN_DESC
select USB_EHCI_BIG_ENDIAN_MMIO
- ---help---
+ help
Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's.
If unsure, say N.
@@ -201,7 +201,7 @@ config XPS_USB_HCD_XILINX
depends on (PPC32 || MICROBLAZE)
select USB_EHCI_BIG_ENDIAN_DESC
select USB_EHCI_BIG_ENDIAN_MMIO
- ---help---
+ help
Xilinx xps USB host controller core is EHCI compliant and has
transaction translator built-in. It can be configured to either
support both high speed and full speed devices, or high speed
@@ -210,14 +210,14 @@ config XPS_USB_HCD_XILINX
config USB_EHCI_FSL
tristate "Support for Freescale on-chip EHCI USB controller"
select USB_EHCI_ROOT_HUB_TT
- ---help---
+ help
Variation of ARC USB block used in some Freescale chips.
config USB_EHCI_MXC
tristate "Support for Freescale i.MX on-chip EHCI USB controller"
depends on ARCH_MXC || COMPILE_TEST
select USB_EHCI_ROOT_HUB_TT
- ---help---
+ help
Variation of ARC USB block used in some Freescale chips.
config USB_EHCI_HCD_NPCM7XX
@@ -233,7 +233,7 @@ config USB_EHCI_HCD_OMAP
depends on ARCH_OMAP
depends on NOP_USB_XCEIV
default y
- ---help---
+ help
Enables support for the on-chip EHCI controller on
OMAP3 and later chips.
@@ -241,7 +241,7 @@ config USB_EHCI_HCD_ORION
tristate "Support for Marvell EBU on-chip EHCI USB controller"
depends on USB_EHCI_HCD && (PLAT_ORION || ARCH_MVEBU || COMPILE_TEST)
default y if (PLAT_ORION || ARCH_MVEBU)
- ---help---
+ help
Enables support for the on-chip EHCI controller on Marvell's
embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP,
Armada 370. This is different from the EHCI implementation
@@ -252,7 +252,7 @@ config USB_EHCI_HCD_SPEAR
tristate "Support for ST SPEAr on-chip EHCI USB controller"
depends on USB_EHCI_HCD && (PLAT_SPEAR || COMPILE_TEST)
default y if PLAT_SPEAR
- ---help---
+ help
Enables support for the on-chip EHCI controller on
ST SPEAr chips.
@@ -269,7 +269,7 @@ config USB_EHCI_HCD_AT91
tristate "Support for Atmel on-chip EHCI USB controller"
depends on USB_EHCI_HCD && (ARCH_AT91 || COMPILE_TEST)
default y if ARCH_AT91
- ---help---
+ help
Enables support for the on-chip EHCI controller on
Atmel chips.
@@ -286,14 +286,14 @@ config USB_EHCI_HCD_PPC_OF
bool "EHCI support for PPC USB controller on OF platform bus"
depends on PPC
default y
- ---help---
+ help
Enables support for the USB controller present on the PowerPC
OpenFirmware platform bus.
config USB_EHCI_SH
bool "EHCI support for SuperH USB controller"
depends on SUPERH || COMPILE_TEST
- ---help---
+ help
Enables support for the on-chip EHCI controller on the SuperH.
If you use the PCI EHCI controller, this option is not necessary.
@@ -307,7 +307,7 @@ config USB_EHCI_MV
tristate "EHCI support for Marvell PXA/MMP USB controller"
depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST
select USB_EHCI_ROOT_HUB_TT
- ---help---
+ help
Enables support for Marvell (including PXA and MMP series) on-chip
USB SPH and OTG controller. SPH is a single port host, and it can
only be EHCI host. OTG is controller that can switch to host mode.
@@ -320,7 +320,7 @@ config USB_CNS3XXX_EHCI
bool "Cavium CNS3XXX EHCI Module (DEPRECATED)"
depends on ARCH_CNS3XXX || COMPILE_TEST
select USB_EHCI_HCD_PLATFORM
- ---help---
+ help
This option is deprecated now and the driver was removed, use
USB_EHCI_HCD_PLATFORM instead.
@@ -330,7 +330,7 @@ config USB_CNS3XXX_EHCI
config USB_EHCI_HCD_PLATFORM
tristate "Generic EHCI driver for a platform device"
- ---help---
+ help
Adds an EHCI host driver for a generic platform device, which
provides a memory space and an irq.
@@ -355,7 +355,7 @@ endif # USB_EHCI_HCD
config USB_OXU210HP_HCD
tristate "OXU210HP HCD support"
depends on HAS_IOMEM
- ---help---
+ help
The OXU210HP is an USB host/OTG/device controller. Enable this
option if your board has this chip. If unsure, say N.
@@ -368,7 +368,7 @@ config USB_OXU210HP_HCD
config USB_ISP116X_HCD
tristate "ISP116X HCD support"
depends on HAS_IOMEM
- ---help---
+ help
The ISP1160 and ISP1161 chips are USB host controllers. Enable this
option if your board has this chip. If unsure, say N.
@@ -381,7 +381,7 @@ config USB_ISP1362_HCD
tristate "ISP1362 HCD support"
depends on HAS_IOMEM
depends on COMPILE_TEST # nothing uses this
- ---help---
+ help
Supports the Philips ISP1362 chip as a host controller
This driver does not support isochronous transfers.
@@ -392,7 +392,7 @@ config USB_ISP1362_HCD
config USB_FOTG210_HCD
tristate "FOTG210 HCD support"
depends on USB && HAS_DMA && HAS_IOMEM
- ---help---
+ help
Faraday FOTG210 is an OTG controller which can be configured as
an USB2.0 host. It is designed to meet USB2.0 EHCI specification
with minor modification.
@@ -403,7 +403,7 @@ config USB_FOTG210_HCD
config USB_MAX3421_HCD
tristate "MAX3421 HCD (USB-over-SPI) support"
depends on USB && SPI
- ---help---
+ help
The Maxim MAX3421E chip supports standard USB 2.0-compliant
full-speed devices either in host or peripheral mode. This
driver supports the host-mode of the MAX3421E only.
@@ -414,7 +414,7 @@ config USB_MAX3421_HCD
config USB_OHCI_HCD
tristate "OHCI HCD (USB 1.1) support"
depends on HAS_DMA && HAS_IOMEM
- ---help---
+ help
The Open Host Controller Interface (OHCI) is a standard for accessing
USB 1.1 host controller hardware. It does more in hardware than Intel's
UHCI specification. If your USB host controller follows the OHCI spec,
@@ -434,14 +434,14 @@ config USB_OHCI_HCD_OMAP1
depends on ARCH_OMAP1
depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3)
default y
- ---help---
+ help
Enables support for the OHCI controller on OMAP1/2 chips.
config USB_OHCI_HCD_SPEAR
tristate "Support for ST SPEAr on-chip OHCI USB controller"
depends on USB_OHCI_HCD && (PLAT_SPEAR || COMPILE_TEST)
default y if PLAT_SPEAR
- ---help---
+ help
Enables support for the on-chip OHCI controller on
ST SPEAr chips.
@@ -458,7 +458,7 @@ config USB_OHCI_HCD_S3C2410
tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series"
depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX || COMPILE_TEST)
default y if (ARCH_S3C24XX || ARCH_S3C64XX)
- ---help---
+ help
Enables support for the on-chip OHCI controller on
S3C24xx/S3C64xx chips.
@@ -468,7 +468,7 @@ config USB_OHCI_HCD_LPC32XX
depends on ARCH_LPC32XX || COMPILE_TEST
depends on USB_ISP1301
default y
- ---help---
+ help
Enables support for the on-chip OHCI controller on
NXP chips.
@@ -476,7 +476,7 @@ config USB_OHCI_HCD_PXA27X
tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
depends on USB_OHCI_HCD && (PXA27x || PXA3xx)
default y
- ---help---
+ help
Enables support for the on-chip OHCI controller on
PXA27x/PXA3xx chips.
@@ -484,7 +484,7 @@ config USB_OHCI_HCD_AT91
tristate "Support for Atmel on-chip OHCI USB controller"
depends on USB_OHCI_HCD && (ARCH_AT91 || COMPILE_TEST) && OF
default y if ARCH_AT91
- ---help---
+ help
Enables support for the on-chip OHCI controller on
Atmel chips.
@@ -516,7 +516,7 @@ config USB_OHCI_HCD_PPC_OF_BE
depends on PPC
select USB_OHCI_BIG_ENDIAN_DESC
select USB_OHCI_BIG_ENDIAN_MMIO
- ---help---
+ help
Enables support for big-endian USB controllers present on the
OpenFirmware platform bus.
@@ -524,7 +524,7 @@ config USB_OHCI_HCD_PPC_OF_LE
bool "OHCI support for OF platform bus (little endian)"
depends on PPC
select USB_OHCI_LITTLE_ENDIAN
- ---help---
+ help
Enables support for little-endian USB controllers present on the
OpenFirmware platform bus.
@@ -538,7 +538,7 @@ config USB_OHCI_HCD_PCI
depends on USB_PCI
default y
select USB_OHCI_LITTLE_ENDIAN
- ---help---
+ help
Enables support for PCI-bus plug-in USB controller cards.
If unsure, say Y.
@@ -547,7 +547,7 @@ config USB_OHCI_HCD_SSB
depends on (SSB = y || SSB = USB_OHCI_HCD)
select USB_HCD_SSB
select USB_OHCI_HCD_PLATFORM
- ---help---
+ help
This option is deprecated now and the driver was removed, use
USB_HCD_SSB and USB_OHCI_HCD_PLATFORM instead.
@@ -563,7 +563,7 @@ config USB_OHCI_SH
bool "OHCI support for SuperH USB controller (DEPRECATED)"
depends on SUPERH || COMPILE_TEST
select USB_OHCI_HCD_PLATFORM
- ---help---
+ help
This option is deprecated now and the driver was removed, use
USB_OHCI_HCD_PLATFORM instead.
@@ -580,7 +580,7 @@ config USB_CNS3XXX_OHCI
bool "Cavium CNS3XXX OHCI Module (DEPRECATED)"
depends on ARCH_CNS3XXX || COMPILE_TEST
select USB_OHCI_HCD_PLATFORM
- ---help---
+ help
This option is deprecated now and the driver was removed, use
USB_OHCI_HCD_PLATFORM instead.
@@ -589,7 +589,7 @@ config USB_CNS3XXX_OHCI
config USB_OHCI_HCD_PLATFORM
tristate "Generic OHCI driver for a platform device"
- ---help---
+ help
Adds an OHCI host driver for a generic platform device, which
provides a memory space and an irq.
@@ -615,7 +615,7 @@ endif # USB_OHCI_HCD
config USB_UHCI_HCD
tristate "UHCI HCD (most Intel and VIA) support"
depends on USB_PCI || USB_UHCI_SUPPORT_NON_PCI_HC
- ---help---
+ help
The Universal Host Controller Interface is a standard by Intel for
accessing the USB hardware in the PC (which is also called the USB
host controller). If your USB host controller conforms to this
@@ -777,7 +777,7 @@ config USB_HCD_SSB
config USB_HCD_TEST_MODE
bool "HCD test mode support"
- ---help---
+ help
Say 'Y' to enable additional software test modes that may be
supported by the host controller drivers.
diff --git a/drivers/usb/image/Kconfig b/drivers/usb/image/Kconfig
index 26c75f309da9..a65c638e7fc1 100644
--- a/drivers/usb/image/Kconfig
+++ b/drivers/usb/image/Kconfig
@@ -6,7 +6,7 @@ comment "USB Imaging devices"
config USB_MDC800
tristate "USB Mustek MDC800 Digital Camera support"
- ---help---
+ help
Say Y here if you want to connect this type of still camera to
your computer's USB port. This driver can be used with gphoto 0.4.3
and higher (look at <http://www.gphoto.org/>).
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 833a460ee55a..4e48f8eed168 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -6,7 +6,7 @@ comment "USB Miscellaneous drivers"
config USB_EMI62
tristate "EMI 6|2m USB Audio interface support"
- ---help---
+ help
This driver loads firmware to Emagic EMI 6|2m low latency USB
Audio and Midi interface.
@@ -20,7 +20,7 @@ config USB_EMI62
config USB_EMI26
tristate "EMI 2|6 USB Audio interface support"
- ---help---
+ help
This driver loads firmware to Emagic EMI 2|6 low latency USB
Audio interface.
diff --git a/drivers/usb/misc/sisusbvga/Kconfig b/drivers/usb/misc/sisusbvga/Kconfig
index c16121276a21..655d9cb0651a 100644
--- a/drivers/usb/misc/sisusbvga/Kconfig
+++ b/drivers/usb/misc/sisusbvga/Kconfig
@@ -4,7 +4,7 @@ config USB_SISUSBVGA
tristate "USB 2.0 SVGA dongle support (Net2280/SiS315)"
depends on (USB_MUSB_HDRC || USB_EHCI_HCD)
select FONT_SUPPORT if USB_SISUSBVGA_CON
- ---help---
+ help
Say Y here if you intend to attach a USB2VGA dongle based on a
Net2280 and a SiS315 chip.
@@ -18,7 +18,7 @@ config USB_SISUSBVGA_CON
bool "Text console and mode switching support" if USB_SISUSBVGA
depends on VT
select FONT_8x16
- ---help---
+ help
Say Y here if you want a VGA text console via the USB dongle or
want to support userland applications that utilize the driver's
display mode switching capabilities.
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 25d7e0c36d38..4007fa25a8ff 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -6,7 +6,7 @@
menuconfig USB_SERIAL
tristate "USB Serial Converter support"
depends on TTY
- ---help---
+ help
Say Y here if you have a USB device that provides normal serial
ports, or acts like a serial device, and you want to connect it to
your USB bus.
@@ -23,7 +23,7 @@ if USB_SERIAL
config USB_SERIAL_CONSOLE
bool "USB Serial Console device support"
depends on USB_SERIAL=y
- ---help---
+ help
If you say Y here, it will be possible to use a USB to serial
converter port as the system console (the system console is the
device which receives all kernel messages and warnings and which
@@ -123,7 +123,7 @@ config USB_SERIAL_WHITEHEAT
config USB_SERIAL_DIGI_ACCELEPORT
tristate "USB Digi International AccelePort USB Serial Driver"
- ---help---
+ help
Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
2 port (plus parallel port) and 4 port USB serial converters. The
parallel port on the USB 2 appears as a third serial port on Linux.
@@ -168,7 +168,7 @@ config USB_SERIAL_EMPEG
config USB_SERIAL_FTDI_SIO
tristate "USB FTDI Single Port Serial Driver"
- ---help---
+ help
Say Y here if you want to use a FTDI SIO single port USB to serial
converter device. The implementation I have is called the USC-1000.
This driver has also been tested with the 245 and 232 devices.
@@ -213,7 +213,7 @@ config USB_SERIAL_IR
config USB_SERIAL_EDGEPORT
tristate "USB Inside Out Edgeport Serial Driver"
- ---help---
+ help
Say Y here if you want to use any of the following devices from
Inside Out Networks (Digi):
Edgeport/4
@@ -311,7 +311,7 @@ config USB_SERIAL_KEYSPAN_PDA
config USB_SERIAL_KEYSPAN
tristate "USB Keyspan USA-xxx Serial Driver"
select USB_EZUSB_FX2
- ---help---
+ help
Say Y here if you want to use Keyspan USB to serial converter
devices. This driver makes use of Keyspan's official firmware
and was developed with their support. You must also include
@@ -324,7 +324,7 @@ config USB_SERIAL_KEYSPAN
config USB_SERIAL_KLSI
tristate "USB KL5KUSB105 (Palmconnect) Driver"
- ---help---
+ help
Say Y here if you want to use a KL5KUSB105 - based single port
serial adapter. The most widely known -- and currently the only
tested -- device in this category is the PalmConnect USB Serial
@@ -339,7 +339,7 @@ config USB_SERIAL_KLSI
config USB_SERIAL_KOBIL_SCT
tristate "USB KOBIL chipcard reader"
- ---help---
+ help
Say Y here if you want to use one of the following KOBIL USB chipcard
readers:
@@ -356,7 +356,7 @@ config USB_SERIAL_KOBIL_SCT
config USB_SERIAL_MCT_U232
tristate "USB MCT Single Port Serial Driver"
- ---help---
+ help
Say Y here if you want to use a USB Serial single port adapter from
Magic Control Technology Corp. (U232 is one of the model numbers).
@@ -368,7 +368,7 @@ config USB_SERIAL_MCT_U232
config USB_SERIAL_METRO
tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
- ---help---
+ help
Say Y here if you want to use a USB POS Metrologic barcode scanner.
To compile this driver as a module, choose M here: the
@@ -376,7 +376,7 @@ config USB_SERIAL_METRO
config USB_SERIAL_MOS7720
tristate "USB Moschip 7720 Serial Driver"
- ---help---
+ help
Say Y here if you want to use USB Serial single and double
port adapters from Moschip Semiconductor Tech.
@@ -388,14 +388,14 @@ config USB_SERIAL_MOS7715_PARPORT
depends on USB_SERIAL_MOS7720
depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
select PARPORT_NOT_PC
- ---help---
+ help
Say Y if you have a Moschip 7715 device and would like to use
the parallel port it provides. The port will register with
the parport subsystem as a low-level driver.
config USB_SERIAL_MOS7840
tristate "USB Moschip 7840/7820 USB Serial Driver"
- ---help---
+ help
Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
Dual-Serial port device from MosChip Semiconductor.
@@ -409,7 +409,7 @@ config USB_SERIAL_MOS7840
config USB_SERIAL_MXUPORT
tristate "USB Moxa UPORT Serial Driver"
- ---help---
+ help
Say Y here if you want to use a MOXA UPort Serial hub.
This driver supports:
@@ -528,7 +528,7 @@ config USB_SERIAL_TI
config USB_SERIAL_CYBERJACK
tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
- ---help---
+ help
Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
reader. This is an interface to ISO 7816 compatible contact-based
chipcards, e.g. GSM SIMs.
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 59aad38b490a..5335a7ff5d14 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -9,7 +9,7 @@ comment "also be needed; see USB_STORAGE Help for more info"
config USB_STORAGE
tristate "USB Mass Storage support"
depends on SCSI
- ---help---
+ help
Say Y here if you want to connect USB mass storage devices to your
computer's USB port. This is the driver you need for USB
floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
@@ -63,7 +63,7 @@ config USB_STORAGE_FREECOM
config USB_STORAGE_ISD200
tristate "ISD-200 USB/ATA Bridge support"
- ---help---
+ help
Say Y here if you want to use USB Mass Store devices based
on the In-Systems Design ISD-200 USB/ATA bridge.
@@ -165,7 +165,7 @@ config USB_STORAGE_KARMA
config USB_STORAGE_CYPRESS_ATACB
tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB"
- ---help---
+ help
Say Y here if you want to use SAT (ata pass through) on devices based
on the Cypress USB/ATA bridge supporting ATACB. This will allow you
to use tools to tune and monitor your drive (like hdparm or smartctl).
@@ -177,7 +177,7 @@ config USB_STORAGE_CYPRESS_ATACB
config USB_STORAGE_ENE_UB6250
tristate "USB ENE card reader support"
- ---help---
+ help
Say Y here if you wish to control a ENE SD/MS Card reader.
Note that this driver does not support SM cards.
diff --git a/drivers/usb/usbip/Kconfig b/drivers/usb/usbip/Kconfig
index 7bbae7a08642..b9f94e2e278d 100644
--- a/drivers/usb/usbip/Kconfig
+++ b/drivers/usb/usbip/Kconfig
@@ -5,7 +5,7 @@ config USBIP_CORE
depends on NET
select USB_COMMON
select SGL_ALLOC
- ---help---
+ help
This enables pushing USB packets over IP to allow remote
machines direct access to USB devices. It provides the
USB/IP core that is required by both drivers.
@@ -21,7 +21,7 @@ config USBIP_CORE
config USBIP_VHCI_HCD
tristate "VHCI hcd"
depends on USBIP_CORE && USB
- ---help---
+ help
This enables the USB/IP virtual host controller driver,
which is run on the remote machine.
@@ -33,7 +33,7 @@ config USBIP_VHCI_HC_PORTS
range 1 15
default 8
depends on USBIP_VHCI_HCD
- ---help---
+ help
To increase number of ports available for USB/IP virtual
host controller driver, this defines number of ports per
USB/IP virtual host controller.
@@ -43,7 +43,7 @@ config USBIP_VHCI_NR_HCS
range 1 128
default 1
depends on USBIP_VHCI_HCD
- ---help---
+ help
To increase number of ports available for USB/IP virtual
host controller driver, this defines number of USB/IP
virtual host controllers as if adding physical host
@@ -52,7 +52,7 @@ config USBIP_VHCI_NR_HCS
config USBIP_HOST
tristate "Host driver"
depends on USBIP_CORE && USB
- ---help---
+ help
This enables the USB/IP host driver, which is run on the
machine that is sharing the USB devices.
@@ -62,7 +62,7 @@ config USBIP_HOST
config USBIP_VUDC
tristate "VUDC driver"
depends on USBIP_CORE && USB_GADGET
- ---help---
+ help
This enables the USB/IP virtual USB device controller
driver, which is run on the host machine, allowing the
machine itself to act as a device.
@@ -73,5 +73,5 @@ config USBIP_VUDC
config USBIP_DEBUG
bool "Debug messages for USB/IP"
depends on USBIP_CORE
- ---help---
+ help
This enables the debug messages from the USB/IP drivers.