diff options
author | Vignesh R <vigneshr@ti.com> | 2017-06-29 10:55:14 +0530 |
---|---|---|
committer | Felipe Balbi <felipe.balbi@linux.intel.com> | 2017-07-17 10:58:56 +0300 |
commit | 541768b08a400d9d292cfd9c898401b8178856ac (patch) | |
tree | b14e103763242586a06dcb9a640fa52e50c9a499 /drivers/usb | |
parent | 5771a8c08880cdca3bfb4a3fc6d309d6bba20877 (diff) | |
download | linux-541768b08a400d9d292cfd9c898401b8178856ac.tar.bz2 |
usb: dwc3: core: Call dwc3_core_get_phy() before initializing phys
commit f54edb539c116 ("usb: dwc3: core: initialize ULPI before trying to
get the PHY") moved call to dwc3_core_get_phy() from dwc3_probe() to
dwc3_core_init() after dwc3_core_soft_reset(). But
dwc3_core_soft_reset() calls phy_init(), therefore dwc3_core_get_phy()
needs to be called before dwc3_core_soft_reset().
Fix this by moving call to dwc3_core_get_phy() before
dwc3_core_soft_reset().
This fixes the following abort seen on DRA7xx platforms
[ 24.769118] usb usb2: SerialNumber: xhci-hcd.1.auto
[ 24.781144] hub 2-0:1.0: USB hub found
[ 24.787836] hub 2-0:1.0: 1 port detected
[ 24.809939] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
Reported-by: Carlos Hernandez <ceh@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Diffstat (limited to 'drivers/usb')
-rw-r--r-- | drivers/usb/dwc3/core.c | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 326b302fc440..03474d3575ab 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -766,15 +766,15 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc->maximum_speed = USB_SPEED_HIGH; } - ret = dwc3_core_soft_reset(dwc); + ret = dwc3_core_get_phy(dwc); if (ret) goto err0; - ret = dwc3_phy_setup(dwc); + ret = dwc3_core_soft_reset(dwc); if (ret) goto err0; - ret = dwc3_core_get_phy(dwc); + ret = dwc3_phy_setup(dwc); if (ret) goto err0; |