Merge branch 'origin' into for-linus

Conflicts:
	MAINTAINERS

161 files changed, 12009 insertions, 2545 deletions

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index dcd49f1e96d0..240750881d28 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -22,7 +22,6 @@ config USB_ARCH_HAS_HCD
 	default y if PCMCIA && !M32R			# sl811_cs
 	default y if ARM				# SL-811
 	default y if SUPERH				# r8a66597-hcd
-	default y if MICROBLAZE
 	default PCI
 
 # many non-PCI SOC chips embed OHCI
@@ -39,6 +38,7 @@ config USB_ARCH_HAS_OHCI
 	default y if ARCH_AT91
 	default y if ARCH_PNX4008 && I2C
 	default y if MFD_TC6393XB
+	default y if ARCH_W90X900
 	# PPC:
 	default y if STB03xxx
 	default y if PPC_MPC52xx
@@ -58,6 +58,8 @@ config USB_ARCH_HAS_EHCI
 	default y if PPC_83xx
 	default y if SOC_AU1200
 	default y if ARCH_IXP4XX
+	default y if ARCH_W90X900
+	default y if ARCH_AT91SAM9G45
 	default PCI
 
 # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 19cb7d5480d7..be3c9b80bc9f 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD)	+= host/
 obj-$(CONFIG_USB_FHCI_HCD)	+= host/
 obj-$(CONFIG_USB_XHCI_HCD)	+= host/
 obj-$(CONFIG_USB_SL811_HCD)	+= host/
+obj-$(CONFIG_USB_ISP1362_HCD)	+= host/
 obj-$(CONFIG_USB_U132_HCD)	+= host/
 obj-$(CONFIG_USB_R8A66597_HCD)	+= host/
 obj-$(CONFIG_USB_HWA_HCD)	+= host/
@@ -39,6 +40,7 @@ obj-$(CONFIG_USB_MICROTEK)	+= image/
 obj-$(CONFIG_USB_SERIAL)	+= serial/
 
 obj-$(CONFIG_USB)		+= misc/
+obj-y				+= early/
 
 obj-$(CONFIG_USB_ATM)		+= atm/
 obj-$(CONFIG_USB_SPEEDTOUCH)	+= atm/
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 2bfc41ece0e1..e3861b21e776 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -59,6 +59,7 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/tty.h>
+#include <linux/serial.h>
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
 #include <linux/module.h>
@@ -609,6 +610,7 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 	acm->throttle = 0;
 
 	tasklet_schedule(&acm->urb_task);
+	set_bit(ASYNCB_INITIALIZED, &acm->port.flags);
 	rv = tty_port_block_til_ready(&acm->port, tty, filp);
 done:
 	mutex_unlock(&acm->mutex);
@@ -858,10 +860,7 @@ static void acm_tty_set_termios(struct tty_struct *tty,
 	if (!ACM_READY(acm))
 		return;
 
-	/* FIXME: Needs to support the tty_baud interface */
-	/* FIXME: Broken on sparc */
-	newline.dwDTERate = cpu_to_le32p(acm_tty_speed +
-		(termios->c_cflag & CBAUD & ~CBAUDEX) + (termios->c_cflag & CBAUDEX ? 15 : 0));
+	newline.dwDTERate = cpu_to_le32(tty_get_baud_rate(tty));
 	newline.bCharFormat = termios->c_cflag & CSTOPB ? 2 : 0;
 	newline.bParityType = termios->c_cflag & PARENB ?
 				(termios->c_cflag & PARODD ? 1 : 2) +
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index ba589d4ca8bc..3e564bfe17d1 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -313,8 +313,13 @@ static ssize_t wdm_write
 	r = usb_autopm_get_interface(desc->intf);
 	if (r < 0)
 		goto outnp;
-	r = wait_event_interruptible(desc->wait, !test_bit(WDM_IN_USE,
-							   &desc->flags));
+
+	if (!file->f_flags && O_NONBLOCK)
+		r = wait_event_interruptible(desc->wait, !test_bit(WDM_IN_USE,
+								&desc->flags));
+	else
+		if (test_bit(WDM_IN_USE, &desc->flags))
+			r = -EAGAIN;
 	if (r < 0)
 		goto out;
 
@@ -377,7 +382,7 @@ outnl:
 static ssize_t wdm_read
 (struct file *file, char __user *buffer, size_t count, loff_t *ppos)
 {
-	int rv, cntr;
+	int rv, cntr = 0;
 	int i = 0;
 	struct wdm_device *desc = file->private_data;
 
@@ -389,10 +394,23 @@ static ssize_t wdm_read
 	if (desc->length == 0) {
 		desc->read = 0;
 retry:
+		if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+			rv = -ENODEV;
+			goto err;
+		}
 		i++;
-		rv = wait_event_interruptible(desc->wait,
-					      test_bit(WDM_READ, &desc->flags));
+		if (file->f_flags & O_NONBLOCK) {
+			if (!test_bit(WDM_READ, &desc->flags)) {
+				rv = cntr ? cntr : -EAGAIN;
+				goto err;
+			}
+			rv = 0;
+		} else {
+			rv = wait_event_interruptible(desc->wait,
+				test_bit(WDM_READ, &desc->flags));
+		}
 
+		/* may have happened while we slept */
 		if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
 			rv = -ENODEV;
 			goto err;
@@ -448,7 +466,7 @@ retry:
 
 err:
 	mutex_unlock(&desc->rlock);
-	if (rv < 0)
+	if (rv < 0 && rv != -EAGAIN)
 		dev_err(&desc->intf->dev, "wdm_read: exit error\n");
 	return rv;
 }
@@ -506,8 +524,6 @@ static int wdm_open(struct inode *inode, struct file *file)
 	desc = usb_get_intfdata(intf);
 	if (test_bit(WDM_DISCONNECTING, &desc->flags))
 		goto out;
-
-	;
 	file->private_data = desc;
 
 	rv = usb_autopm_get_interface(desc->intf);
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index 26c09f0257db..9bc112ee7803 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -1057,14 +1057,14 @@ static const struct file_operations usblp_fops = {
 	.release =	usblp_release,
 };
 
-static char *usblp_nodename(struct device *dev)
+static char *usblp_devnode(struct device *dev, mode_t *mode)
 {
 	return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
 }
 
 static struct usb_class_driver usblp_class = {
 	.name =		"lp%d",
-	.nodename =	usblp_nodename,
+	.devnode =	usblp_devnode,
 	.fops =		&usblp_fops,
 	.minor_base =	USBLP_MINOR_BASE,
 };
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index b09a527f7341..333ee02e7b2b 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -57,7 +57,9 @@ MODULE_DEVICE_TABLE(usb, usbtmc_devices);
 
 /*
  * This structure is the capabilities for the device
- * See section 4.2.1.8 of the USBTMC specification for details.
+ * See section 4.2.1.8 of the USBTMC specification,
+ * and section 4.2.2 of the USBTMC usb488 subclass
+ * specification for details.
  */
 struct usbtmc_dev_capabilities {
 	__u8 interface_capabilities;
@@ -86,6 +88,8 @@ struct usbtmc_device_data {
 	bool TermCharEnabled;
 	bool auto_abort;
 
+	bool zombie; /* fd of disconnected device */
+
 	struct usbtmc_dev_capabilities	capabilities;
 	struct kref kref;
 	struct mutex io_mutex;	/* only one i/o function running at a time */
@@ -367,13 +371,13 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf,
 {
 	struct usbtmc_device_data *data;
 	struct device *dev;
-	unsigned long int n_characters;
+	u32 n_characters;
 	u8 *buffer;
 	int actual;
-	int done;
-	int remaining;
+	size_t done;
+	size_t remaining;
 	int retval;
-	int this_part;
+	size_t this_part;
 
 	/* Get pointer to private data structure */
 	data = filp->private_data;
@@ -384,6 +388,10 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf,
 		return -ENOMEM;
 
 	mutex_lock(&data->io_mutex);
+	if (data->zombie) {
+		retval = -ENODEV;
+		goto exit;
+	}
 
 	remaining = count;
 	done = 0;
@@ -401,10 +409,10 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf,
 		buffer[1] = data->bTag;
 		buffer[2] = ~(data->bTag);
 		buffer[3] = 0; /* Reserved */
-		buffer[4] = (this_part - 12 - 3) & 255;
-		buffer[5] = ((this_part - 12 - 3) >> 8) & 255;
-		buffer[6] = ((this_part - 12 - 3) >> 16) & 255;
-		buffer[7] = ((this_part - 12 - 3) >> 24) & 255;
+		buffer[4] = (this_part) & 255;
+		buffer[5] = ((this_part) >> 8) & 255;
+		buffer[6] = ((this_part) >> 16) & 255;
+		buffer[7] = ((this_part) >> 24) & 255;
 		buffer[8] = data->TermCharEnabled * 2;
 		/* Use term character? */
 		buffer[9] = data->TermChar;
@@ -455,6 +463,22 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf,
 			       (buffer[6] << 16) +
 			       (buffer[7] << 24);
 
+		/* Ensure the instrument doesn't lie about it */
+		if(n_characters > actual - 12) {
+			dev_err(dev, "Device lies about message size: %u > %d\n", n_characters, actual - 12);
+			n_characters = actual - 12;
+		}
+
+		/* Ensure the instrument doesn't send more back than requested */
+		if(n_characters > this_part) {
+			dev_err(dev, "Device returns more than requested: %zu > %zu\n", done + n_characters, done + this_part);
+			n_characters = this_part;
+		}
+
+		/* Bound amount of data received by amount of data requested */
+		if (n_characters > this_part)
+			n_characters = this_part;
+
 		/* Copy buffer to user space */
 		if (copy_to_user(buf + done, &buffer[12], n_characters)) {
 			/* There must have been an addressing problem */
@@ -463,8 +487,11 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf,
 		}
 
 		done += n_characters;
-		if (n_characters < USBTMC_SIZE_IOBUFFER)
+		/* Terminate if end-of-message bit recieved from device */
+		if ((buffer[8] &  0x01) && (actual >= n_characters + 12))
 			remaining = 0;
+		else
+			remaining -= n_characters;
 	}
 
 	/* Update file position value */
@@ -496,6 +523,10 @@ static ssize_t usbtmc_write(struct file *filp, const char __user *buf,
 		return -ENOMEM;
 
 	mutex_lock(&data->io_mutex);
+	if (data->zombie) {
+		retval = -ENODEV;
+		goto exit;
+	}
 
 	remaining = count;
 	done = 0;
@@ -767,20 +798,21 @@ static int get_capabilities(struct usbtmc_device_data *data)
 	}
 
 	dev_dbg(dev, "GET_CAPABILITIES returned %x\n", buffer[0]);
-	dev_dbg(dev, "Interface capabilities are %x\n", buffer[4]);
-	dev_dbg(dev, "Device capabilities are %x\n", buffer[5]);
-	dev_dbg(dev, "USB488 interface capabilities are %x\n", buffer[14]);
-	dev_dbg(dev, "USB488 device capabilities are %x\n", buffer[15]);
 	if (buffer[0] != USBTMC_STATUS_SUCCESS) {
 		dev_err(dev, "GET_CAPABILITIES returned %x\n", buffer[0]);
 		rv = -EPERM;
 		goto err_out;
 	}
+	dev_dbg(dev, "Interface capabilities are %x\n", buffer[4]);
+	dev_dbg(dev, "Device capabilities are %x\n", buffer[5]);
+	dev_dbg(dev, "USB488 interface capabilities are %x\n", buffer[14]);
+	dev_dbg(dev, "USB488 device capabilities are %x\n", buffer[15]);
 
 	data->capabilities.interface_capabilities = buffer[4];
 	data->capabilities.device_capabilities = buffer[5];
 	data->capabilities.usb488_interface_capabilities = buffer[14];
 	data->capabilities.usb488_device_capabilities = buffer[15];
+	rv = 0;
 
 err_out:
 	kfree(buffer);
@@ -925,6 +957,10 @@ static long usbtmc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 
 	data = file->private_data;
 	mutex_lock(&data->io_mutex);
+	if (data->zombie) {
+		retval = -ENODEV;
+		goto skip_io_on_zombie;
+	}
 
 	switch (cmd) {
 	case USBTMC_IOCTL_CLEAR_OUT_HALT:
@@ -952,6 +988,7 @@ static long usbtmc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		break;
 	}
 
+skip_io_on_zombie:
 	mutex_unlock(&data->io_mutex);
 	return retval;
 }
@@ -995,6 +1032,7 @@ static int usbtmc_probe(struct usb_interface *intf,
 	usb_set_intfdata(intf, data);
 	kref_init(&data->kref);
 	mutex_init(&data->io_mutex);
+	data->zombie = 0;
 
 	/* Initialize USBTMC bTag and other fields */
 	data->bTag	= 1;
@@ -1065,14 +1103,30 @@ static void usbtmc_disconnect(struct usb_interface *intf)
 	usb_deregister_dev(intf, &usbtmc_class);
 	sysfs_remove_group(&intf->dev.kobj, &capability_attr_grp);
 	sysfs_remove_group(&intf->dev.kobj, &data_attr_grp);
+	mutex_lock(&data->io_mutex);
+	data->zombie = 1;
+	mutex_unlock(&data->io_mutex);
 	kref_put(&data->kref, usbtmc_delete);
 }
 
+static int usbtmc_suspend (struct usb_interface *intf, pm_message_t message)
+{
+	/* this driver does not have pending URBs */
+	return 0;
+}
+
+static int usbtmc_resume (struct usb_interface *intf)
+{
+	return 0;
+}
+
 static struct usb_driver usbtmc_driver = {
 	.name		= "usbtmc",
 	.id_table	= usbtmc_devices,
 	.probe		= usbtmc_probe,
-	.disconnect	= usbtmc_disconnect
+	.disconnect	= usbtmc_disconnect,
+	.suspend	= usbtmc_suspend,
+	.resume		= usbtmc_resume,
 };
 
 static int __init usbtmc_init(void)
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index a16c538d0132..0d3af6a6ee49 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -105,7 +105,7 @@ static int usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
 	ep->ss_ep_comp->extralen = i;
 	buffer += i;
 	size -= i;
-	retval = buffer - buffer_start + i;
+	retval = buffer - buffer_start;
 	if (num_skipped > 0)
 		dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
 				num_skipped, plural(num_skipped),
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 4247eccf858c..181f78c84105 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -52,6 +52,7 @@
 
 #include "hcd.h"	/* for usbcore internals */
 #include "usb.h"
+#include "hub.h"
 
 #define USB_MAXBUS			64
 #define USB_DEVICE_MAX			USB_MAXBUS * 128
@@ -73,6 +74,7 @@ struct dev_state {
 	void __user *disccontext;
 	unsigned long ifclaimed;
 	u32 secid;
+	u32 disabled_bulk_eps;
 };
 
 struct async {
@@ -87,6 +89,8 @@ struct async {
 	struct urb *urb;
 	int status;
 	u32 secid;
+	u8 bulk_addr;
+	u8 bulk_status;
 };
 
 static int usbfs_snoop;
@@ -99,11 +103,15 @@ MODULE_PARM_DESC(usbfs_snoop, "true to log all usbfs traffic");
 			dev_info(dev , format , ## arg);	\
 	} while (0)
 
-#define USB_DEVICE_DEV		MKDEV(USB_DEVICE_MAJOR, 0)
+enum snoop_when {
+	SUBMIT, COMPLETE
+};
 
+#define USB_DEVICE_DEV		MKDEV(USB_DEVICE_MAJOR, 0)
 
 #define	MAX_USBFS_BUFFER_SIZE	16384
 
+
 static int connected(struct dev_state *ps)
 {
 	return (!list_empty(&ps->list) &&
@@ -300,24 +308,79 @@ static struct async *async_getpending(struct dev_state *ps,
 	return NULL;
 }
 
-static void snoop_urb(struct urb *urb, void __user *userurb)
+static void snoop_urb(struct usb_device *udev,
+		void __user *userurb, int pipe, unsigned length,
+		int timeout_or_status, enum snoop_when when)
 {
-	unsigned j;
-	unsigned char *data = urb->transfer_buffer;
+	static const char *types[] = {"isoc", "int", "ctrl", "bulk"};
+	static const char *dirs[] = {"out", "in"};
+	int ep;
+	const char *t, *d;
 
 	if (!usbfs_snoop)
 		return;
 
-	dev_info(&urb->dev->dev, "direction=%s\n",
-			usb_urb_dir_in(urb) ? "IN" : "OUT");
-	dev_info(&urb->dev->dev, "userurb=%p\n", userurb);
-	dev_info(&urb->dev->dev, "transfer_buffer_length=%u\n",
-		 urb->transfer_buffer_length);
-	dev_info(&urb->dev->dev, "actual_length=%u\n", urb->actual_length);
-	dev_info(&urb->dev->dev, "data: ");
-	for (j = 0; j < urb->transfer_buffer_length; ++j)
-		printk("%02x ", data[j]);
-	printk("\n");
+	ep = usb_pipeendpoint(pipe);
+	t = types[usb_pipetype(pipe)];
+	d = dirs[!!usb_pipein(pipe)];
+
+	if (userurb) {		/* Async */
+		if (when == SUBMIT)
+			dev_info(&udev->dev, "userurb %p, ep%d %s-%s, "
+					"length %u\n",
+					userurb, ep, t, d, length);
+		else
+			dev_info(&udev->dev, "userurb %p, ep%d %s-%s, "
+					"actual_length %u status %d\n",
+					userurb, ep, t, d, length,
+					timeout_or_status);
+	} else {
+		if (when == SUBMIT)
+			dev_info(&udev->dev, "ep%d %s-%s, length %u, "
+					"timeout %d\n",
+					ep, t, d, length, timeout_or_status);
+		else
+			dev_info(&udev->dev, "ep%d %s-%s, actual_length %u, "
+					"status %d\n",
+					ep, t, d, length, timeout_or_status);
+	}
+}
+
+#define AS_CONTINUATION	1
+#define AS_UNLINK	2
+
+static void cancel_bulk_urbs(struct dev_state *ps, unsigned bulk_addr)
+__releases(ps->lock)
+__acquires(ps->lock)
+{
+	struct async *as;
+
+	/* Mark all the pending URBs that match bulk_addr, up to but not
+	 * including the first one without AS_CONTINUATION.  If such an
+	 * URB is encountered then a new transfer has already started so
+	 * the endpoint doesn't need to be disabled; otherwise it does.
+	 */
+	list_for_each_entry(as, &ps->async_pending, asynclist) {
+		if (as->bulk_addr == bulk_addr) {
+			if (as->bulk_status != AS_CONTINUATION)
+				goto rescan;
+			as->bulk_status = AS_UNLINK;
+			as->bulk_addr = 0;
+		}
+	}
+	ps->disabled_bulk_eps |= (1 << bulk_addr);
+
+	/* Now carefully unlink all the marked pending URBs */
+ rescan:
+	list_for_each_entry(as, &ps->async_pending, asynclist) {
+		if (as->bulk_status == AS_UNLINK) {
+			as->bulk_status = 0;		/* Only once */
+			spin_unlock(&ps->lock);		/* Allow completions */
+			usb_unlink_urb(as->urb);
+			spin_lock(&ps->lock);
+			goto rescan;
+		}
+	}
 }
 
 static void async_completed(struct urb *urb)
@@ -346,7 +409,11 @@ static void async_completed(struct urb *urb)
 		secid = as->secid;
 	}
 	snoop(&urb->dev->dev, "urb complete\n");
-	snoop_urb(urb, as->userurb);
+	snoop_urb(urb->dev, as->userurb, urb->pipe, urb->actual_length,
+			as->status, COMPLETE);
+	if (as->status < 0 && as->bulk_addr && as->status != -ECONNRESET &&
+			as->status != -ENOENT)
+		cancel_bulk_urbs(ps, as->bulk_addr);
 	spin_unlock(&ps->lock);
 
 	if (signr)
@@ -655,6 +722,7 @@ static int usbdev_release(struct inode *inode, struct file *file)
 	struct async *as;
 
 	usb_lock_device(dev);
+	usb_hub_release_all_ports(dev, ps);
 
 	/* Protect against simultaneous open */
 	mutex_lock(&usbfs_mutex);
@@ -688,7 +756,7 @@ static int proc_control(struct dev_state *ps, void __user *arg)
 	unsigned int tmo;
 	unsigned char *tbuf;
 	unsigned wLength;
-	int i, j, ret;
+	int i, pipe, ret;
 
 	if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
 		return -EFAULT;
@@ -708,24 +776,17 @@ static int proc_control(struct dev_state *ps, void __user *arg)
 			free_page((unsigned long)tbuf);
 			return -EINVAL;
 		}
-		snoop(&dev->dev, "control read: bRequest=%02x "
-				"bRrequestType=%02x wValue=%04x "
-				"wIndex=%04x wLength=%04x\n",
-			ctrl.bRequest, ctrl.bRequestType, ctrl.wValue,
-				ctrl.wIndex, ctrl.wLength);
+		pipe = usb_rcvctrlpipe(dev, 0);
+		snoop_urb(dev, NULL, pipe, ctrl.wLength, tmo, SUBMIT);
 
 		usb_unlock_device(dev);
-		i = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), ctrl.bRequest,
+		i = usb_control_msg(dev, pipe, ctrl.bRequest,
 				    ctrl.bRequestType, ctrl.wValue, ctrl.wIndex,
 				    tbuf, ctrl.wLength, tmo);
 		usb_lock_device(dev);
+		snoop_urb(dev, NULL, pipe, max(i, 0), min(i, 0), COMPLETE);
+
 		if ((i > 0) && ctrl.wLength) {
-			if (usbfs_snoop) {
-				dev_info(&dev->dev, "control read: data ");
-				for (j = 0; j < i; ++j)
-					printk("%02x ", (u8)(tbuf)[j]);
-				printk("\n");
-			}
 			if (copy_to_user(ctrl.data, tbuf, i)) {
 				free_page((unsigned long)tbuf);
 				return -EFAULT;
@@ -738,22 +799,15 @@ static int proc_control(struct dev_state *ps, void __user *arg)
 				return -EFAULT;
 			}
 		}
-		snoop(&dev->dev, "control write: bRequest=%02x "
-				"bRrequestType=%02x wValue=%04x "
-				"wIndex=%04x wLength=%04x\n",
-			ctrl.bRequest, ctrl.bRequestType, ctrl.wValue,
-				ctrl.wIndex, ctrl.wLength);
-		if (usbfs_snoop) {
-			dev_info(&dev->dev, "control write: data: ");
-			for (j = 0; j < ctrl.wLength; ++j)
-				printk("%02x ", (unsigned char)(tbuf)[j]);
-			printk("\n");
-		}
+		pipe = usb_sndctrlpipe(dev, 0);
+		snoop_urb(dev, NULL, pipe, ctrl.wLength, tmo, SUBMIT);
+
 		usb_unlock_device(dev);
 		i = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), ctrl.bRequest,
 				    ctrl.bRequestType, ctrl.wValue, ctrl.wIndex,
 				    tbuf, ctrl.wLength, tmo);
 		usb_lock_device(dev);
+		snoop_urb(dev, NULL, pipe, max(i, 0), min(i, 0), COMPLETE);
 	}
 	free_page((unsigned long)tbuf);
 	if (i < 0 && i != -EPIPE) {
@@ -772,7 +826,7 @@ static int proc_bulk(struct dev_state *ps, void __user *arg)
 	unsigned int tmo, len1, pipe;
 	int len2;
 	unsigned char *tbuf;
-	int i, j, ret;
+	int i, ret;
 
 	if (copy_from_user(&bulk, arg, sizeof(bulk)))
 		return -EFAULT;
@@ -799,18 +853,14 @@ static int proc_bulk(struct dev_state *ps, void __user *arg)
 			kfree(tbuf);
 			return -EINVAL;
 		}
-		snoop(&dev->dev, "bulk read: len=0x%02x timeout=%04d\n",
-			bulk.len, bulk.timeout);
+		snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT);
+
 		usb_unlock_device(dev);
 		i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo);
 		usb_lock_device(dev);
+		snoop_urb(dev, NULL, pipe, len2, i, COMPLETE);
+
 		if (!i && len2) {
-			if (usbfs_snoop) {
-				dev_info(&dev->dev, "bulk read: data ");
-				for (j = 0; j < len2; ++j)
-					printk("%02x ", (u8)(tbuf)[j]);
-				printk("\n");
-			}
 			if (copy_to_user(bulk.data, tbuf, len2)) {
 				kfree(tbuf);
 				return -EFAULT;
@@ -823,17 +873,12 @@ static int proc_bulk(struct dev_state *ps, void __user *arg)
 				return -EFAULT;
 			}
 		}
-		snoop(&dev->dev, "bulk write: len=0x%02x timeout=%04d\n",
-			bulk.len, bulk.timeout);
-		if (usbfs_snoop) {
-			dev_info(&dev->dev, "bulk write: data: ");
-			for (j = 0; j < len1; ++j)
-				printk("%02x ", (unsigned char)(tbuf)[j]);
-			printk("\n");
-		}
+		snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT);
+
 		usb_unlock_device(dev);
 		i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo);
 		usb_lock_device(dev);
+		snoop_urb(dev, NULL, pipe, len2, i, COMPLETE);
 	}
 	kfree(tbuf);
 	if (i < 0)
@@ -991,6 +1036,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 
 	if (uurb->flags & ~(USBDEVFS_URB_ISO_ASAP |
 				USBDEVFS_URB_SHORT_NOT_OK |
+				USBDEVFS_URB_BULK_CONTINUATION |
 				USBDEVFS_URB_NO_FSBR |
 				USBDEVFS_URB_ZERO_PACKET |
 				USBDEVFS_URB_NO_INTERRUPT))
@@ -1051,13 +1097,6 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 			is_in = 0;
 			uurb->endpoint &= ~USB_DIR_IN;
 		}
-		snoop(&ps->dev->dev, "control urb: bRequest=%02x "
-			"bRrequestType=%02x wValue=%04x "
-			"wIndex=%04x wLength=%04x\n",
-			dr->bRequest, dr->bRequestType,
-			__le16_to_cpup(&dr->wValue),
-			__le16_to_cpup(&dr->wIndex),
-			__le16_to_cpup(&dr->wLength));
 		break;
 
 	case USBDEVFS_URB_TYPE_BULK:
@@ -1070,7 +1109,6 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 		uurb->number_of_packets = 0;
 		if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
 			return -EINVAL;
-		snoop(&ps->dev->dev, "bulk urb\n");
 		break;
 
 	case USBDEVFS_URB_TYPE_ISO:
@@ -1097,12 +1135,12 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 			}
 			totlen += isopkt[u].length;
 		}
-		if (totlen > 32768) {
+		/* 3072 * 64 microframes */
+		if (totlen > 196608) {
 			kfree(isopkt);
 			return -EINVAL;
 		}
 		uurb->buffer_length = totlen;
-		snoop(&ps->dev->dev, "iso urb\n");
 		break;
 
 	case USBDEVFS_URB_TYPE_INTERRUPT:
@@ -1111,7 +1149,6 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 			return -EINVAL;
 		if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
 			return -EINVAL;
-		snoop(&ps->dev->dev, "interrupt urb\n");
 		break;
 
 	default:
@@ -1198,11 +1235,46 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 			return -EFAULT;
 		}
 	}
-	snoop_urb(as->urb, as->userurb);
+	snoop_urb(ps->dev, as->userurb, as->urb->pipe,
+			as->urb->transfer_buffer_length, 0, SUBMIT);
 	async_newpending(as);
-	if ((ret = usb_submit_urb(as->urb, GFP_KERNEL))) {
+
+	if (usb_endpoint_xfer_bulk(&ep->desc)) {
+		spin_lock_irq(&ps->lock);
+
+		/* Not exactly the endpoint address; the direction bit is
+		 * shifted to the 0x10 position so that the value will be
+		 * between 0 and 31.
+		 */
+		as->bulk_addr = usb_endpoint_num(&ep->desc) |
+			((ep->desc.bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+				>> 3);
+
+		/* If this bulk URB is the start of a new transfer, re-enable
+		 * the endpoint.  Otherwise mark it as a continuation URB.
+		 */
+		if (uurb->flags & USBDEVFS_URB_BULK_CONTINUATION)
+			as->bulk_status = AS_CONTINUATION;
+		else
+			ps->disabled_bulk_eps &= ~(1 << as->bulk_addr);
+
+		/* Don't accept continuation URBs if the endpoint is
+		 * disabled because of an earlier error.
+		 */
+		if (ps->disabled_bulk_eps & (1 << as->bulk_addr))
+			ret = -EREMOTEIO;
+		else
+			ret = usb_submit_urb(as->urb, GFP_ATOMIC);
+		spin_unlock_irq(&ps->lock);
+	} else {
+		ret = usb_submit_urb(as->urb, GFP_KERNEL);
+	}
+
+	if (ret) {
 		dev_printk(KERN_DEBUG, &ps->dev->dev,
 			   "usbfs: usb_submit_urb returned %d\n", ret);
+		snoop_urb(ps->dev, as->userurb, as->urb->pipe,
+				0, ret, COMPLETE);
 		async_removepending(as);
 		free_async(as);
 		return ret;
@@ -1548,6 +1620,29 @@ static int proc_ioctl_compat(struct dev_state *ps, compat_uptr_t arg)
 }
 #endif
 
+static int proc_claim_port(struct dev_state *ps, void __user *arg)
+{
+	unsigned portnum;
+	int rc;
+
+	if (get_user(portnum, (unsigned __user *) arg))
+		return -EFAULT;
+	rc = usb_hub_claim_port(ps->dev, portnum, ps);
+	if (rc == 0)
+		snoop(&ps->dev->dev, "port %d claimed by process %d: %s\n",
+			portnum, task_pid_nr(current), current->comm);
+	return rc;
+}
+
+static int proc_release_port(struct dev_state *ps, void __user *arg)
+{
+	unsigned portnum;
+
+	if (get_user(portnum, (unsigned __user *) arg))
+		return -EFAULT;
+	return usb_hub_release_port(ps->dev, portnum, ps);
+}
+
 /*
  * NOTE:  All requests here that have interface numbers as parameters
  * are assuming that somehow the configuration has been prevented from
@@ -1645,7 +1740,7 @@ static int usbdev_ioctl(struct inode *inode, struct file *file,
 		break;
 
 	case USBDEVFS_REAPURBNDELAY32:
-		snoop(&dev->dev, "%s: REAPURBDELAY32\n", __func__);
+		snoop(&dev->dev, "%s: REAPURBNDELAY32\n", __func__);
 		ret = proc_reapurbnonblock_compat(ps, p);
 		break;
 
@@ -1666,7 +1761,7 @@ static int usbdev_ioctl(struct inode *inode, struct file *file,
 		break;
 
 	case USBDEVFS_REAPURBNDELAY:
-		snoop(&dev->dev, "%s: REAPURBDELAY\n", __func__);
+		snoop(&dev->dev, "%s: REAPURBNDELAY\n", __func__);
 		ret = proc_reapurbnonblock(ps, p);
 		break;
 
@@ -1689,6 +1784,16 @@ static int usbdev_ioctl(struct inode *inode, struct file *file,
 		snoop(&dev->dev, "%s: IOCTL\n", __func__);
 		ret = proc_ioctl_default(ps, p);
 		break;
+
+	case USBDEVFS_CLAIM_PORT:
+		snoop(&dev->dev, "%s: CLAIM_PORT\n", __func__);
+		ret = proc_claim_port(ps, p);
+		break;
+
+	case USBDEVFS_RELEASE_PORT:
+		snoop(&dev->dev, "%s: RELEASE_PORT\n", __func__);
+		ret = proc_release_port(ps, p);
+		break;
 	}
 	usb_unlock_device(dev);
 	if (ret >= 0)
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 69e5773abfce..4f864472c5c4 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -207,6 +207,9 @@ static int usb_probe_interface(struct device *dev)
 
 	intf->needs_binding = 0;
 
+	if (usb_device_is_owned(udev))
+		return -ENODEV;
+
 	if (udev->authorized == 0) {
 		dev_err(&intf->dev, "Device is not authorized for usage\n");
 		return -ENODEV;
@@ -232,28 +235,35 @@ static int usb_probe_interface(struct device *dev)
 		/* The interface should always appear to be in use
 		 * unless the driver suports autosuspend.
 		 */
-		intf->pm_usage_cnt = !(driver->supports_autosuspend);
+		atomic_set(&intf->pm_usage_cnt, !driver->supports_autosuspend);
 
 		/* Carry out a deferred switch to altsetting 0 */
 		if (intf->needs_altsetting0) {
-			usb_set_interface(udev, intf->altsetting[0].
+			error = usb_set_interface(udev, intf->altsetting[0].
 					desc.bInterfaceNumber, 0);
+			if (error < 0)
+				goto err;
+
 			intf->needs_altsetting0 = 0;
 		}
 
 		error = driver->probe(intf, id);
-		if (error) {
-			mark_quiesced(intf);
-			intf->needs_remote_wakeup = 0;
-			intf->condition = USB_INTERFACE_UNBOUND;
-			usb_cancel_queued_reset(intf);
-		} else
-			intf->condition = USB_INTERFACE_BOUND;
+		if (error)
+			goto err;
 
+		intf->condition = USB_INTERFACE_BOUND;
 		usb_autosuspend_device(udev);
 	}
 
 	return error;
+
+err:
+	mark_quiesced(intf);
+	intf->needs_remote_wakeup = 0;
+	intf->condition = USB_INTERFACE_UNBOUND;
+	usb_cancel_queued_reset(intf);
+	usb_autosuspend_device(udev);
+	return error;
 }
 
 /* called from driver core with dev locked */
@@ -262,7 +272,7 @@ static int usb_unbind_interface(struct device *dev)
 	struct usb_driver *driver = to_usb_driver(dev->driver);
 	struct usb_interface *intf = to_usb_interface(dev);
 	struct usb_device *udev;
-	int error;
+	int error, r;
 
 	intf->condition = USB_INTERFACE_UNBINDING;
 
@@ -290,11 +300,14 @@ static int usb_unbind_interface(struct device *dev)
 		 * Just re-enable it without affecting the endpoint toggles.
 		 */
 		usb_enable_interface(udev, intf, false);
-	} else if (!error && intf->dev.power.status == DPM_ON)
-		usb_set_interface(udev, intf->altsetting[0].
+	} else if (!error && intf->dev.power.status == DPM_ON) {
+		r = usb_set_interface(udev, intf->altsetting[0].
 				desc.bInterfaceNumber, 0);
-	else
+		if (r < 0)
+			intf->needs_altsetting0 = 1;
+	} else {
 		intf->needs_altsetting0 = 1;
+	}
 	usb_set_intfdata(intf, NULL);
 
 	intf->condition = USB_INTERFACE_UNBOUND;
@@ -344,7 +357,7 @@ int usb_driver_claim_interface(struct usb_driver *driver,
 	usb_pm_lock(udev);
 	iface->condition = USB_INTERFACE_BOUND;
 	mark_active(iface);
-	iface->pm_usage_cnt = !(driver->supports_autosuspend);
+	atomic_set(&iface->pm_usage_cnt, !driver->supports_autosuspend);
 	usb_pm_unlock(udev);
 
 	/* if interface was already added, bind now; else let
@@ -1065,7 +1078,7 @@ static int autosuspend_check(struct usb_device *udev, int reschedule)
 			intf = udev->actconfig->interface[i];
 			if (!is_active(intf))
 				continue;
-			if (intf->pm_usage_cnt > 0)
+			if (atomic_read(&intf->pm_usage_cnt) > 0)
 				return -EBUSY;
 			if (intf->needs_remote_wakeup &&
 					!udev->do_remote_wakeup) {
@@ -1461,17 +1474,19 @@ static int usb_autopm_do_interface(struct usb_interface *intf,
 		status = -ENODEV;
 	else {
 		udev->auto_pm = 1;
-		intf->pm_usage_cnt += inc_usage_cnt;
+		atomic_add(inc_usage_cnt, &intf->pm_usage_cnt);
 		udev->last_busy = jiffies;
-		if (inc_usage_cnt >= 0 && intf->pm_usage_cnt > 0) {
+		if (inc_usage_cnt >= 0 &&
+				atomic_read(&intf->pm_usage_cnt) > 0) {
 			if (udev->state == USB_STATE_SUSPENDED)
 				status = usb_resume_both(udev,
 						PMSG_AUTO_RESUME);
 			if (status != 0)
-				intf->pm_usage_cnt -= inc_usage_cnt;
+				atomic_sub(inc_usage_cnt, &intf->pm_usage_cnt);
 			else
 				udev->last_busy = jiffies;
-		} else if (inc_usage_cnt <= 0 && intf->pm_usage_cnt <= 0) {
+		} else if (inc_usage_cnt <= 0 &&
+				atomic_read(&intf->pm_usage_cnt) <= 0) {
 			status = usb_suspend_both(udev, PMSG_AUTO_SUSPEND);
 		}
 	}
@@ -1516,7 +1531,7 @@ void usb_autopm_put_interface(struct usb_interface *intf)
 
 	status = usb_autopm_do_interface(intf, -1);
 	dev_vdbg(&intf->dev, "%s: status %d cnt %d\n",
-			__func__, status, intf->pm_usage_cnt);
+			__func__, status, atomic_read(&intf->pm_usage_cnt));
 }
 EXPORT_SYMBOL_GPL(usb_autopm_put_interface);
 
@@ -1544,10 +1559,10 @@ void usb_autopm_put_interface_async(struct usb_interface *intf)
 		status = -ENODEV;
 	} else {
 		udev->last_busy = jiffies;
-		--intf->pm_usage_cnt;
+		atomic_dec(&intf->pm_usage_cnt);
 		if (udev->autosuspend_disabled || udev->autosuspend_delay < 0)
 			status = -EPERM;
-		else if (intf->pm_usage_cnt <= 0 &&
+		else if (atomic_read(&intf->pm_usage_cnt) <= 0 &&
 				!timer_pending(&udev->autosuspend.timer)) {
 			queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend,
 					round_jiffies_up_relative(
@@ -1555,7 +1570,7 @@ void usb_autopm_put_interface_async(struct usb_interface *intf)
 		}
 	}
 	dev_vdbg(&intf->dev, "%s: status %d cnt %d\n",
-			__func__, status, intf->pm_usage_cnt);
+			__func__, status, atomic_read(&intf->pm_usage_cnt));
 }
 EXPORT_SYMBOL_GPL(usb_autopm_put_interface_async);
 
@@ -1599,7 +1614,7 @@ int usb_autopm_get_interface(struct usb_interface *intf)
 
 	status = usb_autopm_do_interface(intf, 1);
 	dev_vdbg(&intf->dev, "%s: status %d cnt %d\n",
-			__func__, status, intf->pm_usage_cnt);
+			__func__, status, atomic_read(&intf->pm_usage_cnt));
 	return status;
 }
 EXPORT_SYMBOL_GPL(usb_autopm_get_interface);
@@ -1627,10 +1642,14 @@ int usb_autopm_get_interface_async(struct usb_interface *intf)
 		status = -ENODEV;
 	else if (udev->autoresume_disabled)
 		status = -EPERM;
-	else if (++intf->pm_usage_cnt > 0 && udev->state == USB_STATE_SUSPENDED)
-		queue_work(ksuspend_usb_wq, &udev->autoresume);
+	else {
+		atomic_inc(&intf->pm_usage_cnt);
+		if (atomic_read(&intf->pm_usage_cnt) > 0 &&
+				udev->state == USB_STATE_SUSPENDED)
+			queue_work(ksuspend_usb_wq, &udev->autoresume);
+	}
 	dev_vdbg(&intf->dev, "%s: status %d cnt %d\n",
-			__func__, status, intf->pm_usage_cnt);
+			__func__, status, atomic_read(&intf->pm_usage_cnt));
 	return status;
 }
 EXPORT_SYMBOL_GPL(usb_autopm_get_interface_async);
@@ -1652,7 +1671,7 @@ int usb_autopm_set_interface(struct usb_interface *intf)
 
 	status = usb_autopm_do_interface(intf, 0);
 	dev_vdbg(&intf->dev, "%s: status %d cnt %d\n",
-			__func__, status, intf->pm_usage_cnt);
+			__func__, status, atomic_read(&intf->pm_usage_cnt));
 	return status;
 }
 EXPORT_SYMBOL_GPL(usb_autopm_set_interface);
diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
index 5cef88929b3e..222ee07ea680 100644
--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -67,14 +67,14 @@ static struct usb_class {
 	struct class *class;
 } *usb_class;
 
-static char *usb_nodename(struct device *dev)
+static char *usb_devnode(struct device *dev, mode_t *mode)
 {
 	struct usb_class_driver *drv;
 
 	drv = dev_get_drvdata(dev);
-	if (!drv || !drv->nodename)
+	if (!drv || !drv->devnode)
 		return NULL;
-	return drv->nodename(dev);
+	return drv->devnode(dev, mode);
 }
 
 static int init_usb_class(void)
@@ -100,7 +100,7 @@ static int init_usb_class(void)
 		kfree(usb_class);
 		usb_class = NULL;
 	}
-	usb_class->class->nodename = usb_nodename;
+	usb_class->class->devnode = usb_devnode;
 
 exit:
 	return result;
diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c
index 30ecac3af15a..05e6d313961e 100644
--- a/drivers/usb/core/generic.c
+++ b/drivers/usb/core/generic.c
@@ -158,7 +158,9 @@ static int generic_probe(struct usb_device *udev)
 	/* Choose and set the configuration.  This registers the interfaces
 	 * with the driver core and lets interface drivers bind to them.
 	 */
-	if (udev->authorized == 0)
+	if (usb_device_is_owned(udev))
+		;		/* Don't configure if the device is owned */
+	else if (udev->authorized == 0)
 		dev_err(&udev->dev, "Device is not authorized for usage\n");
 	else {
 		c = usb_choose_configuration(udev);
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 95ccfa0b9fc5..34de475f016e 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -337,72 +337,89 @@ static const u8 ss_rh_config_descriptor[] = {
 
 /*-------------------------------------------------------------------------*/
 
-/*
- * helper routine for returning string descriptors in UTF-16LE
- * input can actually be ISO-8859-1; ASCII is its 7-bit subset
+/**
+ * ascii2desc() - Helper routine for producing UTF-16LE string descriptors
+ * @s: Null-terminated ASCII (actually ISO-8859-1) string
+ * @buf: Buffer for USB string descriptor (header + UTF-16LE)
+ * @len: Length (in bytes; may be odd) of descriptor buffer.
+ *
+ * The return value is the number of bytes filled in: 2 + 2*strlen(s) or
+ * buflen, whichever is less.
+ *
+ * USB String descriptors can contain at most 126 characters; input
+ * strings longer than that are truncated.
  */
-static unsigned ascii2utf(char *s, u8 *utf, int utfmax)
+static unsigned
+ascii2desc(char const *s, u8 *buf, unsigned len)
 {
-	unsigned retval;
+	unsigned n, t = 2 + 2*strlen(s);
 
-	for (retval = 0; *s && utfmax > 1; utfmax -= 2, retval += 2) {
-		*utf++ = *s++;
-		*utf++ = 0;
-	}
-	if (utfmax > 0) {
-		*utf = *s;
-		++retval;
+	if (t > 254)
+		t = 254;	/* Longest possible UTF string descriptor */
+	if (len > t)
+		len = t;
+
+	t += USB_DT_STRING << 8;	/* Now t is first 16 bits to store */
+
+	n = len;
+	while (n--) {
+		*buf++ = t;
+		if (!n--)
+			break;
+		*buf++ = t >> 8;
+		t = (unsigned char)*s++;
 	}
-	return retval;
+	return len;
 }
 
-/*
- * rh_string - provides manufacturer, product and serial strings for root hub
- * @id: the string ID number (1: serial number, 2: product, 3: vendor)
+/**
+ * rh_string() - provides string descriptors for root hub
+ * @id: the string ID number (0: langids, 1: serial #, 2: product, 3: vendor)
  * @hcd: the host controller for this root hub
- * @data: return packet in UTF-16 LE
- * @len: length of the return packet
+ * @data: buffer for output packet
+ * @len: length of the provided buffer
  *
  * Produces either a manufacturer, product or serial number string for the
  * virtual root hub device.
+ * Returns the number of bytes filled in: the length of the descriptor or
+ * of the provided buffer, whichever is less.
  */
-static unsigned rh_string(int id, struct usb_hcd *hcd, u8 *data, unsigned len)
+static unsigned
+rh_string(int id, struct usb_hcd const *hcd, u8 *data, unsigned len)
 {
-	char buf [100];
+	char buf[100];
+	char const *s;
+	static char const langids[4] = {4, USB_DT_STRING, 0x09, 0x04};
 
 	// language ids
-	if (id == 0) {
-		buf[0] = 4;    buf[1] = 3;	/* 4 bytes string data */
-		buf[2] = 0x09; buf[3] = 0x04;	/* MSFT-speak for "en-us" */
-		len = min_t(unsigned, len, 4);
-		memcpy (data, buf, len);
+	switch (id) {
+	case 0:
+		/* Array of LANGID codes (0x0409 is MSFT-speak for "en-us") */
+		/* See http://www.usb.org/developers/docs/USB_LANGIDs.pdf */
+		if (len > 4)
+			len = 4;
+		memcpy(data, langids, len);
 		return len;
-
-	// serial number
-	} else if (id == 1) {
-		strlcpy (buf, hcd->self.bus_name, sizeof buf);
-
-	// product description
-	} else if (id == 2) {
-		strlcpy (buf, hcd->product_desc, sizeof buf);
-
- 	// id 3 == vendor description
-	} else if (id == 3) {
+	case 1:
+		/* Serial number */
+		s = hcd->self.bus_name;
+		break;
+	case 2:
+		/* Product name */
+		s = hcd->product_desc;
+		break;
+	case 3:
+		/* Manufacturer */
 		snprintf (buf, sizeof buf, "%s %s %s", init_utsname()->sysname,
 			init_utsname()->release, hcd->driver->description);
-	}
-
-	switch (len) {		/* All cases fall through */
+		s = buf;
+		break;
 	default:
-		len = 2 + ascii2utf (buf, data + 2, len - 2);
-	case 2:
-		data [1] = 3;	/* type == string */
-	case 1:
-		data [0] = 2 * (strlen (buf) + 1);
-	case 0:
-		;		/* Compiler wants a statement here */
+		/* Can't happen; caller guarantees it */
+		return 0;
 	}
-	return len;
+
+	return ascii2desc(s, data, len);
 }
 
 
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index ec5c67ea07b7..79782a1c43f6 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -267,6 +267,11 @@ struct hc_driver {
 	void	(*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
 		/* Returns the hardware-chosen device address */
 	int	(*address_device)(struct usb_hcd *, struct usb_device *udev);
+		/* Notifies the HCD after a hub descriptor is fetched.
+		 * Will block.
+		 */
+	int	(*update_hub_device)(struct usb_hcd *, struct usb_device *hdev,
+			struct usb_tt *tt, gfp_t mem_flags);
 };
 
 extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 71f86c60d83c..5ce839137ad6 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -78,6 +78,7 @@ struct usb_hub {
 	u8			indicator[USB_MAXCHILDREN];
 	struct delayed_work	leds;
 	struct delayed_work	init_work;
+	void			**port_owners;
 };
 
 
@@ -162,8 +163,10 @@ static inline char *portspeed(int portstatus)
 }
 
 /* Note that hdev or one of its children must be locked! */
-static inline struct usb_hub *hdev_to_hub(struct usb_device *hdev)
+static struct usb_hub *hdev_to_hub(struct usb_device *hdev)
 {
+	if (!hdev || !hdev->actconfig)
+		return NULL;
 	return usb_get_intfdata(hdev->actconfig->interface[0]);
 }
 
@@ -372,7 +375,7 @@ static void kick_khubd(struct usb_hub *hub)
 	unsigned long	flags;
 
 	/* Suppress autosuspend until khubd runs */
-	to_usb_interface(hub->intfdev)->pm_usage_cnt = 1;
+	atomic_set(&to_usb_interface(hub->intfdev)->pm_usage_cnt, 1);
 
 	spin_lock_irqsave(&hub_event_lock, flags);
 	if (!hub->disconnected && list_empty(&hub->event_list)) {
@@ -384,8 +387,10 @@ static void kick_khubd(struct usb_hub *hub)
 
 void usb_kick_khubd(struct usb_device *hdev)
 {
-	/* FIXME: What if hdev isn't bound to the hub driver? */
-	kick_khubd(hdev_to_hub(hdev));
+	struct usb_hub *hub = hdev_to_hub(hdev);
+
+	if (hub)
+		kick_khubd(hub);
 }
 
 
@@ -677,7 +682,8 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 					msecs_to_jiffies(delay));
 
 			/* Suppress autosuspend until init is done */
-			to_usb_interface(hub->intfdev)->pm_usage_cnt = 1;
+			atomic_set(&to_usb_interface(hub->intfdev)->
+					pm_usage_cnt, 1);
 			return;		/* Continues at init2: below */
 		} else {
 			hub_power_on(hub, true);
@@ -854,25 +860,24 @@ static int hub_post_reset(struct usb_interface *intf)
 static int hub_configure(struct usb_hub *hub,
 	struct usb_endpoint_descriptor *endpoint)
 {
+	struct usb_hcd *hcd;
 	struct usb_device *hdev = hub->hdev;
 	struct device *hub_dev = hub->intfdev;
 	u16 hubstatus, hubchange;
 	u16 wHubCharacteristics;
 	unsigned int pipe;
 	int maxp, ret;
-	char *message;
+	char *message = "out of memory";
 
 	hub->buffer = usb_buffer_alloc(hdev, sizeof(*hub->buffer), GFP_KERNEL,
 			&hub->buffer_dma);
 	if (!hub->buffer) {
-		message = "can't allocate hub irq buffer";
 		ret = -ENOMEM;
 		goto fail;
 	}
 
 	hub->status = kmalloc(sizeof(*hub->status), GFP_KERNEL);
 	if (!hub->status) {
-		message = "can't kmalloc hub status buffer";
 		ret = -ENOMEM;
 		goto fail;
 	}
@@ -880,7 +885,6 @@ static int hub_configure(struct usb_hub *hub,
 
 	hub->descriptor = kmalloc(sizeof(*hub->descriptor), GFP_KERNEL);
 	if (!hub->descriptor) {
-		message = "can't kmalloc hub descriptor";
 		ret = -ENOMEM;
 		goto fail;
 	}
@@ -904,6 +908,12 @@ static int hub_configure(struct usb_hub *hub,
 	dev_info (hub_dev, "%d port%s detected\n", hdev->maxchild,
 		(hdev->maxchild == 1) ? "" : "s");
 
+	hub->port_owners = kzalloc(hdev->maxchild * sizeof(void *), GFP_KERNEL);
+	if (!hub->port_owners) {
+		ret = -ENOMEM;
+		goto fail;
+	}
+
 	wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
 
 	if (wHubCharacteristics & HUB_CHAR_COMPOUND) {
@@ -1052,6 +1062,19 @@ static int hub_configure(struct usb_hub *hub,
 		dev_dbg(hub_dev, "%umA bus power budget for each child\n",
 				hub->mA_per_port);
 
+	/* Update the HCD's internal representation of this hub before khubd
+	 * starts getting port status changes for devices under the hub.
+	 */
+	hcd = bus_to_hcd(hdev->bus);
+	if (hcd->driver->update_hub_device) {
+		ret = hcd->driver->update_hub_device(hcd, hdev,
+				&hub->tt, GFP_KERNEL);
+		if (ret < 0) {
+			message = "can't update HCD hub info";
+			goto fail;
+		}
+	}
+
 	ret = hub_hub_status(hub, &hubstatus, &hubchange);
 	if (ret < 0) {
 		message = "can't get hub status";
@@ -1082,7 +1105,6 @@ static int hub_configure(struct usb_hub *hub,
 
 	hub->urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!hub->urb) {
-		message = "couldn't allocate interrupt urb";
 		ret = -ENOMEM;
 		goto fail;
 	}
@@ -1131,11 +1153,13 @@ static void hub_disconnect(struct usb_interface *intf)
 	hub_quiesce(hub, HUB_DISCONNECT);
 
 	usb_set_intfdata (intf, NULL);
+	hub->hdev->maxchild = 0;
 
 	if (hub->hdev->speed == USB_SPEED_HIGH)
 		highspeed_hubs--;
 
 	usb_free_urb(hub->urb);
+	kfree(hub->port_owners);
 	kfree(hub->descriptor);
 	kfree(hub->status);
 	usb_buffer_free(hub->hdev, sizeof(*hub->buffer), hub->buffer,
@@ -1250,6 +1274,79 @@ hub_ioctl(struct usb_interface *intf, unsigned int code, void *user_data)
 	}
 }
 
+/*
+ * Allow user programs to claim ports on a hub.  When a device is attached
+ * to one of these "claimed" ports, the program will "own" the device.
+ */
+static int find_port_owner(struct usb_device *hdev, unsigned port1,
+		void ***ppowner)
+{
+	if (hdev->state == USB_STATE_NOTATTACHED)
+		return -ENODEV;
+	if (port1 == 0 || port1 > hdev->maxchild)
+		return -EINVAL;
+
+	/* This assumes that devices not managed by the hub driver
+	 * will always have maxchild equal to 0.
+	 */
+	*ppowner = &(hdev_to_hub(hdev)->port_owners[port1 - 1]);
+	return 0;
+}
+
+/* In the following three functions, the caller must hold hdev's lock */
+int usb_hub_claim_port(struct usb_device *hdev, unsigned port1, void *owner)
+{
+	int rc;
+	void **powner;
+
+	rc = find_port_owner(hdev, port1, &powner);
+	if (rc)
+		return rc;
+	if (*powner)
+		return -EBUSY;
+	*powner = owner;
+	return rc;
+}
+
+int usb_hub_release_port(struct usb_device *hdev, unsigned port1, void *owner)
+{
+	int rc;
+	void **powner;
+
+	rc = find_port_owner(hdev, port1, &powner);
+	if (rc)
+		return rc;
+	if (*powner != owner)
+		return -ENOENT;
+	*powner = NULL;
+	return rc;
+}
+
+void usb_hub_release_all_ports(struct usb_device *hdev, void *owner)
+{
+	int n;
+	void **powner;
+
+	n = find_port_owner(hdev, 1, &powner);
+	if (n == 0) {
+		for (; n < hdev->maxchild; (++n, ++powner)) {
+			if (*powner == owner)
+				*powner = NULL;
+		}
+	}
+}
+
+/* The caller must hold udev's lock */
+bool usb_device_is_owned(struct usb_device *udev)
+{
+	struct usb_hub *hub;
+
+	if (udev->state == USB_STATE_NOTATTACHED || !udev->parent)
+		return false;
+	hub = hdev_to_hub(udev->parent);
+	return !!hub->port_owners[udev->portnum - 1];
+}
+
 
 static void recursively_mark_NOTATTACHED(struct usb_device *udev)
 {
@@ -2849,14 +2946,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 			/* For a suspended device, treat this as a
 			 * remote wakeup event.
 			 */
-			if (udev->do_remote_wakeup)
-				status = remote_wakeup(udev);
-
-			/* Otherwise leave it be; devices can't tell the
-			 * difference between suspended and disabled.
-			 */
-			else
-				status = 0;
+			status = remote_wakeup(udev);
 #endif
 
 		} else {
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index ffe75e83787c..97b40ce133f0 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -48,7 +48,6 @@
 #define USBFS_DEFAULT_BUSMODE (S_IXUGO | S_IRUGO)
 #define USBFS_DEFAULT_LISTMODE S_IRUGO
 
-static struct super_operations usbfs_ops;
 static const struct file_operations default_file_operations;
 static struct vfsmount *usbfs_mount;
 static int usbfs_mount_count;	/* = 0 */
@@ -449,7 +448,7 @@ static const struct file_operations default_file_operations = {
 	.llseek =	default_file_lseek,
 };
 
-static struct super_operations usbfs_ops = {
+static const struct super_operations usbfs_ops = {
 	.statfs =	simple_statfs,
 	.drop_inode =	generic_delete_inode,
 	.remount_fs =	remount,
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 9720e699f472..da718e84d58d 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -459,35 +459,23 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev,
 			io->urbs[i]->context = io;
 
 			/*
-			 * Some systems need to revert to PIO when DMA is
-			 * temporarily unavailable.  For their sakes, both
-			 * transfer_buffer and transfer_dma are set when
-			 * possible.  However this can only work on systems
-			 * without:
+			 * Some systems need to revert to PIO when DMA is temporarily
+			 * unavailable.  For their sakes, both transfer_buffer and
+			 * transfer_dma are set when possible.
 			 *
-			 *  - HIGHMEM, since DMA buffers located in high memory
-			 *    are not directly addressable by the CPU for PIO;
-			 *
-			 *  - IOMMU, since dma_map_sg() is allowed to use an
-			 *    IOMMU to make virtually discontiguous buffers be
-			 *    "dma-contiguous" so that PIO and DMA need diferent
-			 *    numbers of URBs.
-			 *
-			 * So when HIGHMEM or IOMMU are in use, transfer_buffer
-			 * is NULL to prevent stale pointers and to help spot
-			 * bugs.
+			 * Note that if IOMMU coalescing occurred, we cannot
+			 * trust sg_page anymore, so check if S/G list shrunk.
 			 */
+			if (io->nents == io->entries && !PageHighMem(sg_page(sg)))
+				io->urbs[i]->transfer_buffer = sg_virt(sg);
+			else
+				io->urbs[i]->transfer_buffer = NULL;
+
 			if (dma) {
 				io->urbs[i]->transfer_dma = sg_dma_address(sg);
 				len = sg_dma_len(sg);
-#if defined(CONFIG_HIGHMEM) || defined(CONFIG_GART_IOMMU)
-				io->urbs[i]->transfer_buffer = NULL;
-#else
-				io->urbs[i]->transfer_buffer = sg_virt(sg);
-#endif
 			} else {
 				/* hc may use _only_ transfer_buffer */
-				io->urbs[i]->transfer_buffer = sg_virt(sg);
 				len = sg->length;
 			}
 
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index a26f73880c32..b1b85abb9a2d 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -311,7 +311,7 @@ static struct dev_pm_ops usb_device_pm_ops = {
 #endif	/* CONFIG_PM */
 
 
-static char *usb_nodename(struct device *dev)
+static char *usb_devnode(struct device *dev, mode_t *mode)
 {
 	struct usb_device *usb_dev;
 
@@ -324,7 +324,7 @@ struct device_type usb_device_type = {
 	.name =		"usb_device",
 	.release =	usb_release_dev,
 	.uevent =	usb_dev_uevent,
-	.nodename = 	usb_nodename,
+	.devnode = 	usb_devnode,
 	.pm =		&usb_device_pm_ops,
 };
 
@@ -413,8 +413,13 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
 		} else {
 			snprintf(dev->devpath, sizeof dev->devpath,
 				"%s.%d", parent->devpath, port1);
-			dev->route = parent->route +
-				(port1 << ((parent->level - 1)*4));
+			/* Route string assumes hubs have less than 16 ports */
+			if (port1 < 15)
+				dev->route = parent->route +
+					(port1 << ((parent->level - 1)*4));
+			else
+				dev->route = parent->route +
+					(15 << ((parent->level - 1)*4));
 		}
 
 		dev->dev.parent = &parent->dev;
@@ -914,11 +919,11 @@ int usb_buffer_map_sg(const struct usb_device *dev, int is_in,
 			|| !(bus = dev->bus)
 			|| !(controller = bus->controller)
 			|| !controller->dma_mask)
-		return -1;
+		return -EINVAL;
 
 	/* FIXME generic api broken like pci, can't report errors */
 	return dma_map_sg(controller, sg, nents,
-			is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+			is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE) ? : -ENOMEM;
 }
 EXPORT_SYMBOL_GPL(usb_buffer_map_sg);
 
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index c0e0ae2bb8e7..9a8b15e6377a 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -37,6 +37,13 @@ extern int usb_match_device(struct usb_device *dev,
 extern void usb_forced_unbind_intf(struct usb_interface *intf);
 extern void usb_rebind_intf(struct usb_interface *intf);
 
+extern int usb_hub_claim_port(struct usb_device *hdev, unsigned port,
+		void *owner);
+extern int usb_hub_release_port(struct usb_device *hdev, unsigned port,
+		void *owner);
+extern void usb_hub_release_all_ports(struct usb_device *hdev, void *owner);
+extern bool usb_device_is_owned(struct usb_device *udev);
+
 extern int  usb_hub_init(void);
 extern void usb_hub_cleanup(void);
 extern int usb_major_init(void);
diff --git a/drivers/usb/early/Makefile b/drivers/usb/early/Makefile
new file mode 100644
index 000000000000..dfedee8c45b6
--- /dev/null
+++ b/drivers/usb/early/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for early USB devices
+#
+
+obj-$(CONFIG_EARLY_PRINTK_DBGP)        += ehci-dbgp.o
diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c
new file mode 100644
index 000000000000..1206a26ef893
--- /dev/null
+++ b/drivers/usb/early/ehci-dbgp.c
@@ -0,0 +1,996 @@
+/*
+ * Standalone EHCI usb debug driver
+ *
+ * Originally written by:
+ *  Eric W. Biederman" <ebiederm@xmission.com> and
+ *  Yinghai Lu <yhlu.kernel@gmail.com>
+ *
+ * Changes for early/late printk and HW errata:
+ *  Jason Wessel <jason.wessel@windriver.com>
+ *  Copyright (C) 2009 Wind River Systems, Inc.
+ *
+ */
+
+#include <linux/console.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/pci_regs.h>
+#include <linux/pci_ids.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/ehci_def.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/pci-direct.h>
+#include <asm/fixmap.h>
+
+/* The code here is intended to talk directly to the EHCI debug port
+ * and does not require that you have any kind of USB host controller
+ * drivers or USB device drivers compiled into the kernel.
+ *
+ * If you make a change to anything in here, the following test cases
+ * need to pass where a USB debug device works in the following
+ * configurations.
+ *
+ * 1. boot args:  earlyprintk=dbgp
+ *     o kernel compiled with # CONFIG_USB_EHCI_HCD is not set
+ *     o kernel compiled with CONFIG_USB_EHCI_HCD=y
+ * 2. boot args: earlyprintk=dbgp,keep
+ *     o kernel compiled with # CONFIG_USB_EHCI_HCD is not set
+ *     o kernel compiled with CONFIG_USB_EHCI_HCD=y
+ * 3. boot args: earlyprintk=dbgp console=ttyUSB0
+ *     o kernel has CONFIG_USB_EHCI_HCD=y and
+ *       CONFIG_USB_SERIAL_DEBUG=y
+ * 4. boot args: earlyprintk=vga,dbgp
+ *     o kernel compiled with # CONFIG_USB_EHCI_HCD is not set
+ *     o kernel compiled with CONFIG_USB_EHCI_HCD=y
+ *
+ * For the 4th configuration you can turn on or off the DBGP_DEBUG
+ * such that you can debug the dbgp device's driver code.
+ */
+
+static int dbgp_phys_port = 1;
+
+static struct ehci_caps __iomem *ehci_caps;
+static struct ehci_regs __iomem *ehci_regs;
+static struct ehci_dbg_port __iomem *ehci_debug;
+static int dbgp_not_safe; /* Cannot use debug device during ehci reset */
+static unsigned int dbgp_endpoint_out;
+
+struct ehci_dev {
+	u32 bus;
+	u32 slot;
+	u32 func;
+};
+
+static struct ehci_dev ehci_dev;
+
+#define USB_DEBUG_DEVNUM 127
+
+#define DBGP_DATA_TOGGLE	0x8800
+
+#ifdef DBGP_DEBUG
+#define dbgp_printk printk
+static void dbgp_ehci_status(char *str)
+{
+	if (!ehci_debug)
+		return;
+	dbgp_printk("dbgp: %s\n", str);
+	dbgp_printk("  Debug control: %08x", readl(&ehci_debug->control));
+	dbgp_printk("  ehci cmd     : %08x", readl(&ehci_regs->command));
+	dbgp_printk("  ehci conf flg: %08x\n",
+		    readl(&ehci_regs->configured_flag));
+	dbgp_printk("  ehci status  : %08x", readl(&ehci_regs->status));
+	dbgp_printk("  ehci portsc  : %08x\n",
+		    readl(&ehci_regs->port_status[dbgp_phys_port - 1]));
+}
+#else
+static inline void dbgp_ehci_status(char *str) { }
+static inline void dbgp_printk(const char *fmt, ...) { }
+#endif
+
+static inline u32 dbgp_pid_update(u32 x, u32 tok)
+{
+	return ((x ^ DBGP_DATA_TOGGLE) & 0xffff00) | (tok & 0xff);
+}
+
+static inline u32 dbgp_len_update(u32 x, u32 len)
+{
+	return (x & ~0x0f) | (len & 0x0f);
+}
+
+/*
+ * USB Packet IDs (PIDs)
+ */
+
+/* token */
+#define USB_PID_OUT		0xe1
+#define USB_PID_IN		0x69
+#define USB_PID_SOF		0xa5
+#define USB_PID_SETUP		0x2d
+/* handshake */
+#define USB_PID_ACK		0xd2
+#define USB_PID_NAK		0x5a
+#define USB_PID_STALL		0x1e
+#define USB_PID_NYET		0x96
+/* data */
+#define USB_PID_DATA0		0xc3
+#define USB_PID_DATA1		0x4b
+#define USB_PID_DATA2		0x87
+#define USB_PID_MDATA		0x0f
+/* Special */
+#define USB_PID_PREAMBLE	0x3c
+#define USB_PID_ERR		0x3c
+#define USB_PID_SPLIT		0x78
+#define USB_PID_PING		0xb4
+#define USB_PID_UNDEF_0		0xf0
+
+#define USB_PID_DATA_TOGGLE	0x88
+#define DBGP_CLAIM (DBGP_OWNER | DBGP_ENABLED | DBGP_INUSE)
+
+#define PCI_CAP_ID_EHCI_DEBUG	0xa
+
+#define HUB_ROOT_RESET_TIME	50	/* times are in msec */
+#define HUB_SHORT_RESET_TIME	10
+#define HUB_LONG_RESET_TIME	200
+#define HUB_RESET_TIMEOUT	500
+
+#define DBGP_MAX_PACKET		8
+#define DBGP_TIMEOUT		(250 * 1000)
+
+static int dbgp_wait_until_complete(void)
+{
+	u32 ctrl;
+	int loop = DBGP_TIMEOUT;
+
+	do {
+		ctrl = readl(&ehci_debug->control);
+		/* Stop when the transaction is finished */
+		if (ctrl & DBGP_DONE)
+			break;
+		udelay(1);
+	} while (--loop > 0);
+
+	if (!loop)
+		return -DBGP_TIMEOUT;
+
+	/*
+	 * Now that we have observed the completed transaction,
+	 * clear the done bit.
+	 */
+	writel(ctrl | DBGP_DONE, &ehci_debug->control);
+	return (ctrl & DBGP_ERROR) ? -DBGP_ERRCODE(ctrl) : DBGP_LEN(ctrl);
+}
+
+static inline void dbgp_mdelay(int ms)
+{
+	int i;
+
+	while (ms--) {
+		for (i = 0; i < 1000; i++)
+			outb(0x1, 0x80);
+	}
+}
+
+static void dbgp_breath(void)
+{
+	/* Sleep to give the debug port a chance to breathe */
+}
+
+static int dbgp_wait_until_done(unsigned ctrl)
+{
+	u32 pids, lpid;
+	int ret;
+	int loop = 3;
+
+retry:
+	writel(ctrl | DBGP_GO, &ehci_debug->control);
+	ret = dbgp_wait_until_complete();
+	pids = readl(&ehci_debug->pids);
+	lpid = DBGP_PID_GET(pids);
+
+	if (ret < 0) {
+		/* A -DBGP_TIMEOUT failure here means the device has
+		 * failed, perhaps because it was unplugged, in which
+		 * case we do not want to hang the system so the dbgp
+		 * will be marked as unsafe to use.  EHCI reset is the
+		 * only way to recover if you unplug the dbgp device.
+		 */
+		if (ret == -DBGP_TIMEOUT && !dbgp_not_safe)
+			dbgp_not_safe = 1;
+		return ret;
+	}
+
+	/*
+	 * If the port is getting full or it has dropped data
+	 * start pacing ourselves, not necessary but it's friendly.
+	 */
+	if ((lpid == USB_PID_NAK) || (lpid == USB_PID_NYET))
+		dbgp_breath();
+
+	/* If I get a NACK reissue the transmission */
+	if (lpid == USB_PID_NAK) {
+		if (--loop > 0)
+			goto retry;
+	}
+
+	return ret;
+}
+
+static inline void dbgp_set_data(const void *buf, int size)
+{
+	const unsigned char *bytes = buf;
+	u32 lo, hi;
+	int i;
+
+	lo = hi = 0;
+	for (i = 0; i < 4 && i < size; i++)
+		lo |= bytes[i] << (8*i);
+	for (; i < 8 && i < size; i++)
+		hi |= bytes[i] << (8*(i - 4));
+	writel(lo, &ehci_debug->data03);
+	writel(hi, &ehci_debug->data47);
+}
+
+static inline void dbgp_get_data(void *buf, int size)
+{
+	unsigned char *bytes = buf;
+	u32 lo, hi;
+	int i;
+
+	lo = readl(&ehci_debug->data03);
+	hi = readl(&ehci_debug->data47);
+	for (i = 0; i < 4 && i < size; i++)
+		bytes[i] = (lo >> (8*i)) & 0xff;
+	for (; i < 8 && i < size; i++)
+		bytes[i] = (hi >> (8*(i - 4))) & 0xff;
+}
+
+static int dbgp_out(u32 addr, const char *bytes, int size)
+{
+	u32 pids, ctrl;
+
+	pids = readl(&ehci_debug->pids);
+	pids = dbgp_pid_update(pids, USB_PID_OUT);
+
+	ctrl = readl(&ehci_debug->control);
+	ctrl = dbgp_len_update(ctrl, size);
+	ctrl |= DBGP_OUT;
+	ctrl |= DBGP_GO;
+
+	dbgp_set_data(bytes, size);
+	writel(addr, &ehci_debug->address);
+	writel(pids, &ehci_debug->pids);
+	return dbgp_wait_until_done(ctrl);
+}
+
+static int dbgp_bulk_write(unsigned devnum, unsigned endpoint,
+			 const char *bytes, int size)
+{
+	int ret;
+	int loops = 5;
+	u32 addr;
+	if (size > DBGP_MAX_PACKET)
+		return -1;
+
+	addr = DBGP_EPADDR(devnum, endpoint);
+try_again:
+	if (loops--) {
+		ret = dbgp_out(addr, bytes, size);
+		if (ret == -DBGP_ERR_BAD) {
+			int try_loops = 3;
+			do {
+				/* Emit a dummy packet to re-sync communication
+				 * with the debug device */
+				if (dbgp_out(addr, "12345678", 8) >= 0) {
+					udelay(2);
+					goto try_again;
+				}
+			} while (try_loops--);
+		}
+	}
+
+	return ret;
+}
+
+static int dbgp_bulk_read(unsigned devnum, unsigned endpoint, void *data,
+				 int size)
+{
+	u32 pids, addr, ctrl;
+	int ret;
+
+	if (size > DBGP_MAX_PACKET)
+		return -1;
+
+	addr = DBGP_EPADDR(devnum, endpoint);
+
+	pids = readl(&ehci_debug->pids);
+	pids = dbgp_pid_update(pids, USB_PID_IN);
+
+	ctrl = readl(&ehci_debug->control);
+	ctrl = dbgp_len_update(ctrl, size);
+	ctrl &= ~DBGP_OUT;
+	ctrl |= DBGP_GO;
+
+	writel(addr, &ehci_debug->address);
+	writel(pids, &ehci_debug->pids);
+	ret = dbgp_wait_until_done(ctrl);
+	if (ret < 0)
+		return ret;
+
+	if (size > ret)
+		size = ret;
+	dbgp_get_data(data, size);
+	return ret;
+}
+
+static int dbgp_control_msg(unsigned devnum, int requesttype,
+	int request, int value, int index, void *data, int size)
+{
+	u32 pids, addr, ctrl;
+	struct usb_ctrlrequest req;
+	int read;
+	int ret;
+
+	read = (requesttype & USB_DIR_IN) != 0;
+	if (size > (read ? DBGP_MAX_PACKET:0))
+		return -1;
+
+	/* Compute the control message */
+	req.bRequestType = requesttype;
+	req.bRequest = request;
+	req.wValue = cpu_to_le16(value);
+	req.wIndex = cpu_to_le16(index);
+	req.wLength = cpu_to_le16(size);
+
+	pids = DBGP_PID_SET(USB_PID_DATA0, USB_PID_SETUP);
+	addr = DBGP_EPADDR(devnum, 0);
+
+	ctrl = readl(&ehci_debug->control);
+	ctrl = dbgp_len_update(ctrl, sizeof(req));
+	ctrl |= DBGP_OUT;
+	ctrl |= DBGP_GO;
+
+	/* Send the setup message */
+	dbgp_set_data(&req, sizeof(req));
+	writel(addr, &ehci_debug->address);
+	writel(pids, &ehci_debug->pids);
+	ret = dbgp_wait_until_done(ctrl);
+	if (ret < 0)
+		return ret;
+
+	/* Read the result */
+	return dbgp_bulk_read(devnum, 0, data, size);
+}
+
+
+/* Find a PCI capability */
+static u32 __init find_cap(u32 num, u32 slot, u32 func, int cap)
+{
+	u8 pos;
+	int bytes;
+
+	if (!(read_pci_config_16(num, slot, func, PCI_STATUS) &
+		PCI_STATUS_CAP_LIST))
+		return 0;
+
+	pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST);
+	for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) {
+		u8 id;
+
+		pos &= ~3;
+		id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID);
+		if (id == 0xff)
+			break;
+		if (id == cap)
+			return pos;
+
+		pos = read_pci_config_byte(num, slot, func,
+						 pos+PCI_CAP_LIST_NEXT);
+	}
+	return 0;
+}
+
+static u32 __init __find_dbgp(u32 bus, u32 slot, u32 func)
+{
+	u32 class;
+
+	class = read_pci_config(bus, slot, func, PCI_CLASS_REVISION);
+	if ((class >> 8) != PCI_CLASS_SERIAL_USB_EHCI)
+		return 0;
+
+	return find_cap(bus, slot, func, PCI_CAP_ID_EHCI_DEBUG);
+}
+
+static u32 __init find_dbgp(int ehci_num, u32 *rbus, u32 *rslot, u32 *rfunc)
+{
+	u32 bus, slot, func;
+
+	for (bus = 0; bus < 256; bus++) {
+		for (slot = 0; slot < 32; slot++) {
+			for (func = 0; func < 8; func++) {
+				unsigned cap;
+
+				cap = __find_dbgp(bus, slot, func);
+
+				if (!cap)
+					continue;
+				if (ehci_num-- != 0)
+					continue;
+				*rbus = bus;
+				*rslot = slot;
+				*rfunc = func;
+				return cap;
+			}
+		}
+	}
+	return 0;
+}
+
+static int dbgp_ehci_startup(void)
+{
+	u32 ctrl, cmd, status;
+	int loop;
+
+	/* Claim ownership, but do not enable yet */
+	ctrl = readl(&ehci_debug->control);
+	ctrl |= DBGP_OWNER;
+	ctrl &= ~(DBGP_ENABLED | DBGP_INUSE);
+	writel(ctrl, &ehci_debug->control);
+	udelay(1);
+
+	dbgp_ehci_status("EHCI startup");
+	/* Start the ehci running */
+	cmd = readl(&ehci_regs->command);
+	cmd &= ~(CMD_LRESET | CMD_IAAD | CMD_PSE | CMD_ASE | CMD_RESET);
+	cmd |= CMD_RUN;
+	writel(cmd, &ehci_regs->command);
+
+	/* Ensure everything is routed to the EHCI */
+	writel(FLAG_CF, &ehci_regs->configured_flag);
+
+	/* Wait until the controller is no longer halted */
+	loop = 10;
+	do {
+		status = readl(&ehci_regs->status);
+		if (!(status & STS_HALT))
+			break;
+		udelay(1);
+	} while (--loop > 0);
+
+	if (!loop) {
+		dbgp_printk("ehci can not be started\n");
+		return -ENODEV;
+	}
+	dbgp_printk("ehci started\n");
+	return 0;
+}
+
+static int dbgp_ehci_controller_reset(void)
+{
+	int loop = 250 * 1000;
+	u32 cmd;
+
+	/* Reset the EHCI controller */
+	cmd = readl(&ehci_regs->command);
+	cmd |= CMD_RESET;
+	writel(cmd, &ehci_regs->command);
+	do {
+		cmd = readl(&ehci_regs->command);
+	} while ((cmd & CMD_RESET) && (--loop > 0));
+
+	if (!loop) {
+		dbgp_printk("can not reset ehci\n");
+		return -1;
+	}
+	dbgp_ehci_status("ehci reset done");
+	return 0;
+}
+static int ehci_wait_for_port(int port);
+/* Return 0 on success
+ * Return -ENODEV for any general failure
+ * Return -EIO if wait for port fails
+ */
+int dbgp_external_startup(void)
+{
+	int devnum;
+	struct usb_debug_descriptor dbgp_desc;
+	int ret;
+	u32 ctrl, portsc, cmd;
+	int dbg_port = dbgp_phys_port;
+	int tries = 3;
+	int reset_port_tries = 1;
+	int try_hard_once = 1;
+
+try_port_reset_again:
+	ret = dbgp_ehci_startup();
+	if (ret)
+		return ret;
+
+	/* Wait for a device to show up in the debug port */
+	ret = ehci_wait_for_port(dbg_port);
+	if (ret < 0) {
+		portsc = readl(&ehci_regs->port_status[dbg_port - 1]);
+		if (!(portsc & PORT_CONNECT) && try_hard_once) {
+			/* Last ditch effort to try to force enable
+			 * the debug device by using the packet test
+			 * ehci command to try and wake it up. */
+			try_hard_once = 0;
+			cmd = readl(&ehci_regs->command);
+			cmd &= ~CMD_RUN;
+			writel(cmd, &ehci_regs->command);
+			portsc = readl(&ehci_regs->port_status[dbg_port - 1]);
+			portsc |= PORT_TEST_PKT;
+			writel(portsc, &ehci_regs->port_status[dbg_port - 1]);
+			dbgp_ehci_status("Trying to force debug port online");
+			mdelay(50);
+			dbgp_ehci_controller_reset();
+			goto try_port_reset_again;
+		} else if (reset_port_tries--) {
+			goto try_port_reset_again;
+		}
+		dbgp_printk("No device found in debug port\n");
+		return -EIO;
+	}
+	dbgp_ehci_status("wait for port done");
+
+	/* Enable the debug port */
+	ctrl = readl(&ehci_debug->control);
+	ctrl |= DBGP_CLAIM;
+	writel(ctrl, &ehci_debug->control);
+	ctrl = readl(&ehci_debug->control);
+	if ((ctrl & DBGP_CLAIM) != DBGP_CLAIM) {
+		dbgp_printk("No device in debug port\n");
+		writel(ctrl & ~DBGP_CLAIM, &ehci_debug->control);
+		return -ENODEV;
+	}
+	dbgp_ehci_status("debug ported enabled");
+
+	/* Completely transfer the debug device to the debug controller */
+	portsc = readl(&ehci_regs->port_status[dbg_port - 1]);
+	portsc &= ~PORT_PE;
+	writel(portsc, &ehci_regs->port_status[dbg_port - 1]);
+
+	dbgp_mdelay(100);
+
+try_again:
+	/* Find the debug device and make it device number 127 */
+	for (devnum = 0; devnum <= 127; devnum++) {
+		ret = dbgp_control_msg(devnum,
+			USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+			USB_REQ_GET_DESCRIPTOR, (USB_DT_DEBUG << 8), 0,
+			&dbgp_desc, sizeof(dbgp_desc));
+		if (ret > 0)
+			break;
+	}
+	if (devnum > 127) {
+		dbgp_printk("Could not find attached debug device\n");
+		goto err;
+	}
+	if (ret < 0) {
+		dbgp_printk("Attached device is not a debug device\n");
+		goto err;
+	}
+	dbgp_endpoint_out = dbgp_desc.bDebugOutEndpoint;
+
+	/* Move the device to 127 if it isn't already there */
+	if (devnum != USB_DEBUG_DEVNUM) {
+		ret = dbgp_control_msg(devnum,
+			USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+			USB_REQ_SET_ADDRESS, USB_DEBUG_DEVNUM, 0, NULL, 0);
+		if (ret < 0) {
+			dbgp_printk("Could not move attached device to %d\n",
+				USB_DEBUG_DEVNUM);
+			goto err;
+		}
+		devnum = USB_DEBUG_DEVNUM;
+		dbgp_printk("debug device renamed to 127\n");
+	}
+
+	/* Enable the debug interface */
+	ret = dbgp_control_msg(USB_DEBUG_DEVNUM,
+		USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+		USB_REQ_SET_FEATURE, USB_DEVICE_DEBUG_MODE, 0, NULL, 0);
+	if (ret < 0) {
+		dbgp_printk(" Could not enable the debug device\n");
+		goto err;
+	}
+	dbgp_printk("debug interface enabled\n");
+	/* Perform a small write to get the even/odd data state in sync
+	 */
+	ret = dbgp_bulk_write(USB_DEBUG_DEVNUM, dbgp_endpoint_out, " ", 1);
+	if (ret < 0) {
+		dbgp_printk("dbgp_bulk_write failed: %d\n", ret);
+		goto err;
+	}
+	dbgp_printk("small write doned\n");
+	dbgp_not_safe = 0;
+
+	return 0;
+err:
+	if (tries--)
+		goto try_again;
+	return -ENODEV;
+}
+EXPORT_SYMBOL_GPL(dbgp_external_startup);
+
+static int __init ehci_reset_port(int port)
+{
+	u32 portsc;
+	u32 delay_time, delay;
+	int loop;
+
+	dbgp_ehci_status("reset port");
+	/* Reset the usb debug port */
+	portsc = readl(&ehci_regs->port_status[port - 1]);
+	portsc &= ~PORT_PE;
+	portsc |= PORT_RESET;
+	writel(portsc, &ehci_regs->port_status[port - 1]);
+
+	delay = HUB_ROOT_RESET_TIME;
+	for (delay_time = 0; delay_time < HUB_RESET_TIMEOUT;
+	     delay_time += delay) {
+		dbgp_mdelay(delay);
+		portsc = readl(&ehci_regs->port_status[port - 1]);
+		if (!(portsc & PORT_RESET))
+			break;
+	}
+		if (portsc & PORT_RESET) {
+			/* force reset to complete */
+			loop = 100 * 1000;
+			writel(portsc & ~(PORT_RWC_BITS | PORT_RESET),
+				&ehci_regs->port_status[port - 1]);
+			do {
+				udelay(1);
+				portsc = readl(&ehci_regs->port_status[port-1]);
+			} while ((portsc & PORT_RESET) && (--loop > 0));
+		}
+
+		/* Device went away? */
+		if (!(portsc & PORT_CONNECT))
+			return -ENOTCONN;
+
+		/* bomb out completely if something weird happend */
+		if ((portsc & PORT_CSC))
+			return -EINVAL;
+
+		/* If we've finished resetting, then break out of the loop */
+		if (!(portsc & PORT_RESET) && (portsc & PORT_PE))
+			return 0;
+	return -EBUSY;
+}
+
+static int ehci_wait_for_port(int port)
+{
+	u32 status;
+	int ret, reps;
+
+	for (reps = 0; reps < 300; reps++) {
+		status = readl(&ehci_regs->status);
+		if (status & STS_PCD)
+			break;
+		dbgp_mdelay(1);
+	}
+	ret = ehci_reset_port(port);
+	if (ret == 0)
+		return 0;
+	return -ENOTCONN;
+}
+
+typedef void (*set_debug_port_t)(int port);
+
+static void __init default_set_debug_port(int port)
+{
+}
+
+static set_debug_port_t __initdata set_debug_port = default_set_debug_port;
+
+static void __init nvidia_set_debug_port(int port)
+{
+	u32 dword;
+	dword = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func,
+				 0x74);
+	dword &= ~(0x0f<<12);
+	dword |= ((port & 0x0f)<<12);
+	write_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, 0x74,
+				 dword);
+	dbgp_printk("set debug port to %d\n", port);
+}
+
+static void __init detect_set_debug_port(void)
+{
+	u32 vendorid;
+
+	vendorid = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func,
+		 0x00);
+
+	if ((vendorid & 0xffff) == 0x10de) {
+		dbgp_printk("using nvidia set_debug_port\n");
+		set_debug_port = nvidia_set_debug_port;
+	}
+}
+
+/* The code in early_ehci_bios_handoff() is derived from the usb pci
+ * quirk initialization, but altered so as to use the early PCI
+ * routines. */
+#define EHCI_USBLEGSUP_BIOS	(1 << 16)	/* BIOS semaphore */
+#define EHCI_USBLEGCTLSTS	4		/* legacy control/status */
+static void __init early_ehci_bios_handoff(void)
+{
+	u32 hcc_params = readl(&ehci_caps->hcc_params);
+	int offset = (hcc_params >> 8) & 0xff;
+	u32 cap;
+	int msec;
+
+	if (!offset)
+		return;
+
+	cap = read_pci_config(ehci_dev.bus, ehci_dev.slot,
+			      ehci_dev.func, offset);
+	dbgp_printk("dbgp: ehci BIOS state %08x\n", cap);
+
+	if ((cap & 0xff) == 1 && (cap & EHCI_USBLEGSUP_BIOS)) {
+		dbgp_printk("dbgp: BIOS handoff\n");
+		write_pci_config_byte(ehci_dev.bus, ehci_dev.slot,
+				      ehci_dev.func, offset + 3, 1);
+	}
+
+	/* if boot firmware now owns EHCI, spin till it hands it over. */
+	msec = 1000;
+	while ((cap & EHCI_USBLEGSUP_BIOS) && (msec > 0)) {
+		mdelay(10);
+		msec -= 10;
+		cap = read_pci_config(ehci_dev.bus, ehci_dev.slot,
+				      ehci_dev.func, offset);
+	}
+
+	if (cap & EHCI_USBLEGSUP_BIOS) {
+		/* well, possibly buggy BIOS... try to shut it down,
+		 * and hope nothing goes too wrong */
+		dbgp_printk("dbgp: BIOS handoff failed: %08x\n", cap);
+		write_pci_config_byte(ehci_dev.bus, ehci_dev.slot,
+				      ehci_dev.func, offset + 2, 0);
+	}
+
+	/* just in case, always disable EHCI SMIs */
+	write_pci_config_byte(ehci_dev.bus, ehci_dev.slot, ehci_dev.func,
+			      offset + EHCI_USBLEGCTLSTS, 0);
+}
+
+static int __init ehci_setup(void)
+{
+	u32 ctrl, portsc, hcs_params;
+	u32 debug_port, new_debug_port = 0, n_ports;
+	int ret, i;
+	int port_map_tried;
+	int playtimes = 3;
+
+	early_ehci_bios_handoff();
+
+try_next_time:
+	port_map_tried = 0;
+
+try_next_port:
+
+	hcs_params = readl(&ehci_caps->hcs_params);
+	debug_port = HCS_DEBUG_PORT(hcs_params);
+	dbgp_phys_port = debug_port;
+	n_ports    = HCS_N_PORTS(hcs_params);
+
+	dbgp_printk("debug_port: %d\n", debug_port);
+	dbgp_printk("n_ports:    %d\n", n_ports);
+	dbgp_ehci_status("");
+
+	for (i = 1; i <= n_ports; i++) {
+		portsc = readl(&ehci_regs->port_status[i-1]);
+		dbgp_printk("portstatus%d: %08x\n", i, portsc);
+	}
+
+	if (port_map_tried && (new_debug_port != debug_port)) {
+		if (--playtimes) {
+			set_debug_port(new_debug_port);
+			goto try_next_time;
+		}
+		return -1;
+	}
+
+	/* Only reset the controller if it is not already in the
+	 * configured state */
+	if (!(readl(&ehci_regs->configured_flag) & FLAG_CF)) {
+		if (dbgp_ehci_controller_reset() != 0)
+			return -1;
+	} else {
+		dbgp_ehci_status("ehci skip - already configured");
+	}
+
+	ret = dbgp_external_startup();
+	if (ret == -EIO)
+		goto next_debug_port;
+
+	if (ret < 0) {
+		/* Things didn't work so remove my claim */
+		ctrl = readl(&ehci_debug->control);
+		ctrl &= ~(DBGP_CLAIM | DBGP_OUT);
+		writel(ctrl, &ehci_debug->control);
+		return -1;
+	}
+	return 0;
+
+next_debug_port:
+	port_map_tried |= (1<<(debug_port - 1));
+	new_debug_port = ((debug_port-1+1)%n_ports) + 1;
+	if (port_map_tried != ((1<<n_ports) - 1)) {
+		set_debug_port(new_debug_port);
+		goto try_next_port;
+	}
+	if (--playtimes) {
+		set_debug_port(new_debug_port);
+		goto try_next_time;
+	}
+
+	return -1;
+}
+
+int __init early_dbgp_init(char *s)
+{
+	u32 debug_port, bar, offset;
+	u32 bus, slot, func, cap;
+	void __iomem *ehci_bar;
+	u32 dbgp_num;
+	u32 bar_val;
+	char *e;
+	int ret;
+	u8 byte;
+
+	if (!early_pci_allowed())
+		return -1;
+
+	dbgp_num = 0;
+	if (*s)
+		dbgp_num = simple_strtoul(s, &e, 10);
+	dbgp_printk("dbgp_num: %d\n", dbgp_num);
+
+	cap = find_dbgp(dbgp_num, &bus, &slot, &func);
+	if (!cap)
+		return -1;
+
+	dbgp_printk("Found EHCI debug port on %02x:%02x.%1x\n", bus, slot,
+			 func);
+
+	debug_port = read_pci_config(bus, slot, func, cap);
+	bar = (debug_port >> 29) & 0x7;
+	bar = (bar * 4) + 0xc;
+	offset = (debug_port >> 16) & 0xfff;
+	dbgp_printk("bar: %02x offset: %03x\n", bar, offset);
+	if (bar != PCI_BASE_ADDRESS_0) {
+		dbgp_printk("only debug ports on bar 1 handled.\n");
+
+		return -1;
+	}
+
+	bar_val = read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_0);
+	dbgp_printk("bar_val: %02x offset: %03x\n", bar_val, offset);
+	if (bar_val & ~PCI_BASE_ADDRESS_MEM_MASK) {
+		dbgp_printk("only simple 32bit mmio bars supported\n");
+
+		return -1;
+	}
+
+	/* double check if the mem space is enabled */
+	byte = read_pci_config_byte(bus, slot, func, 0x04);
+	if (!(byte & 0x2)) {
+		byte  |= 0x02;
+		write_pci_config_byte(bus, slot, func, 0x04, byte);
+		dbgp_printk("mmio for ehci enabled\n");
+	}
+
+	/*
+	 * FIXME I don't have the bar size so just guess PAGE_SIZE is more
+	 * than enough.  1K is the biggest I have seen.
+	 */
+	set_fixmap_nocache(FIX_DBGP_BASE, bar_val & PAGE_MASK);
+	ehci_bar = (void __iomem *)__fix_to_virt(FIX_DBGP_BASE);
+	ehci_bar += bar_val & ~PAGE_MASK;
+	dbgp_printk("ehci_bar: %p\n", ehci_bar);
+
+	ehci_caps  = ehci_bar;
+	ehci_regs  = ehci_bar + HC_LENGTH(readl(&ehci_caps->hc_capbase));
+	ehci_debug = ehci_bar + offset;
+	ehci_dev.bus = bus;
+	ehci_dev.slot = slot;
+	ehci_dev.func = func;
+
+	detect_set_debug_port();
+
+	ret = ehci_setup();
+	if (ret < 0) {
+		dbgp_printk("ehci_setup failed\n");
+		ehci_debug = NULL;
+
+		return -1;
+	}
+	dbgp_ehci_status("early_init_complete");
+
+	return 0;
+}
+
+static void early_dbgp_write(struct console *con, const char *str, u32 n)
+{
+	int chunk, ret;
+	char buf[DBGP_MAX_PACKET];
+	int use_cr = 0;
+	u32 cmd, ctrl;
+	int reset_run = 0;
+
+	if (!ehci_debug || dbgp_not_safe)
+		return;
+
+	cmd = readl(&ehci_regs->command);
+	if (unlikely(!(cmd & CMD_RUN))) {
+		/* If the ehci controller is not in the run state do extended
+		 * checks to see if the acpi or some other initialization also
+		 * reset the ehci debug port */
+		ctrl = readl(&ehci_debug->control);
+		if (!(ctrl & DBGP_ENABLED)) {
+			dbgp_not_safe = 1;
+			dbgp_external_startup();
+		} else {
+			cmd |= CMD_RUN;
+			writel(cmd, &ehci_regs->command);
+			reset_run = 1;
+		}
+	}
+	while (n > 0) {
+		for (chunk = 0; chunk < DBGP_MAX_PACKET && n > 0;
+		     str++, chunk++, n--) {
+			if (!use_cr && *str == '\n') {
+				use_cr = 1;
+				buf[chunk] = '\r';
+				str--;
+				n++;
+				continue;
+			}
+			if (use_cr)
+				use_cr = 0;
+			buf[chunk] = *str;
+		}
+		if (chunk > 0) {
+			ret = dbgp_bulk_write(USB_DEBUG_DEVNUM,
+				      dbgp_endpoint_out, buf, chunk);
+		}
+	}
+	if (unlikely(reset_run)) {
+		cmd = readl(&ehci_regs->command);
+		cmd &= ~CMD_RUN;
+		writel(cmd, &ehci_regs->command);
+	}
+}
+
+struct console early_dbgp_console = {
+	.name =		"earlydbg",
+	.write =	early_dbgp_write,
+	.flags =	CON_PRINTBUFFER,
+	.index =	-1,
+};
+
+int dbgp_reset_prep(void)
+{
+	u32 ctrl;
+
+	dbgp_not_safe = 1;
+	if (!ehci_debug)
+		return 0;
+
+	if (early_dbgp_console.index != -1 &&
+		!(early_dbgp_console.flags & CON_BOOT))
+		return 1;
+	/* This means the console is not initialized, or should get
+	 * shutdown so as to allow for reuse of the usb device, which
+	 * means it is time to shutdown the usb debug port. */
+	ctrl = readl(&ehci_debug->control);
+	if (ctrl & DBGP_ENABLED) {
+		ctrl &= ~(DBGP_CLAIM);
+		writel(ctrl, &ehci_debug->control);
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dbgp_reset_prep);
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 7f8e83a954ac..33351312327f 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -124,7 +124,7 @@ choice
 
 config USB_GADGET_AT91
 	boolean "Atmel AT91 USB Device Port"
-	depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9
+	depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9 && !ARCH_AT91SAM9G45
 	select USB_GADGET_SELECTED
 	help
 	   Many Atmel AT91 processors (such as the AT91RM2000) have a
@@ -143,7 +143,7 @@ config USB_AT91
 config USB_GADGET_ATMEL_USBA
 	boolean "Atmel USBA"
 	select USB_GADGET_DUALSPEED
-	depends on AVR32 || ARCH_AT91CAP9 || ARCH_AT91SAM9RL
+	depends on AVR32 || ARCH_AT91CAP9 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
 	help
 	  USBA is the integrated high-speed USB Device controller on
 	  the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
@@ -251,6 +251,24 @@ config USB_PXA25X_SMALL
 	default y if USB_ETH
 	default y if USB_G_SERIAL
 
+config USB_GADGET_R8A66597
+	boolean "Renesas R8A66597 USB Peripheral Controller"
+	select USB_GADGET_DUALSPEED
+	help
+	   R8A66597 is a discrete USB host and peripheral controller chip that
+	   supports both full and high speed USB 2.0 data transfers.
+	   It has nine configurable endpoints, and endpoint zero.
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "r8a66597_udc" and force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_R8A66597
+	tristate
+	depends on USB_GADGET_R8A66597
+	default USB_GADGET
+	select USB_GADGET_SELECTED
+
 config USB_GADGET_PXA27X
 	boolean "PXA 27x"
 	depends on ARCH_PXA && (PXA27x || PXA3xx)
@@ -360,16 +378,6 @@ config USB_M66592
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
-config SUPERH_BUILT_IN_M66592
-	boolean "Enable SuperH built-in USB like the M66592"
-	depends on USB_GADGET_M66592 && CPU_SUBTYPE_SH7722
-	help
-	   SH7722 has USB like the M66592.
-
-	   The transfer rate is very slow when use "Ethernet Gadget".
-	   However, this problem is improved if change a value of
-	   NET_IP_ALIGN to 4.
-
 #
 # Controllers available only in discrete form (and all PCI controllers)
 #
@@ -619,9 +627,10 @@ config USB_AUDIO
 config USB_ETH
 	tristate "Ethernet Gadget (with CDC Ethernet support)"
 	depends on NET
+	select CRC32
 	help
-	  This driver implements Ethernet style communication, in either
-	  of two ways:
+	  This driver implements Ethernet style communication, in one of
+	  several ways:
 	  
 	   - The "Communication Device Class" (CDC) Ethernet Control Model.
 	     That protocol is often avoided with pure Ethernet adapters, in
@@ -631,7 +640,11 @@ config USB_ETH
 	   - On hardware can't implement that protocol, a simple CDC subset
 	     is used, placing fewer demands on USB.
 
-	  RNDIS support is a third option, more demanding than that subset.
+	   - CDC Ethernet Emulation Model (EEM) is a newer standard that has
+	     a simpler interface that can be used by more USB hardware.
+
+	  RNDIS support is an additional option, more demanding than than
+	  subset.
 
 	  Within the USB device, this gadget driver exposes a network device
 	  "usbX", where X depends on what other networking devices you have.
@@ -664,6 +677,22 @@ config USB_ETH_RNDIS
 	   XP, you'll need to download drivers from Microsoft's website; a URL
 	   is given in comments found in that info file.
 
+config USB_ETH_EEM
+       bool "Ethernet Emulation Model (EEM) support"
+       depends on USB_ETH
+       default n
+       help
+         CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
+         and therefore can be supported by more hardware.  Technically ECM and
+         EEM are designed for different applications.  The ECM model extends
+         the network interface to the target (e.g. a USB cable modem), and the
+         EEM model is for mobile devices to communicate with hosts using
+         ethernet over USB.  For Linux gadgets, however, the interface with
+         the host is the same (a usbX device), so the differences are minimal.
+
+         If you say "y" here, the Ethernet gadget driver will use the EEM
+         protocol rather than ECM.  If unsure, say "n".
+
 config USB_GADGETFS
 	tristate "Gadget Filesystem (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index e6017e6bf6da..9d7b87c52e9f 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -23,6 +23,7 @@ ifeq ($(CONFIG_ARCH_MXC),y)
 fsl_usb2_udc-objs		+= fsl_mx3_udc.o
 endif
 obj-$(CONFIG_USB_M66592)	+= m66592-udc.o
+obj-$(CONFIG_USB_R8A66597)	+= r8a66597-udc.o
 obj-$(CONFIG_USB_FSL_QE)	+= fsl_qe_udc.o
 obj-$(CONFIG_USB_CI13XXX)	+= ci13xxx_udc.o
 obj-$(CONFIG_USB_S3C_HSOTG)	+= s3c-hsotg.o
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 77352ccc245e..d5b65962dd36 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -2378,40 +2378,34 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
 		if (!ep->cancel_transfer && !list_empty(&ep->queue)) {
 			req = list_entry(ep->queue.next,
 					struct udc_request, queue);
-			if (req) {
-				/*
-				 * length bytes transfered
-				 * check dma done of last desc. in PPBDU mode
-				 */
-				if (use_dma_ppb_du) {
-					td = udc_get_last_dma_desc(req);
-					if (td) {
-						dma_done =
-							AMD_GETBITS(td->status,
-							UDC_DMA_IN_STS_BS);
-						/* don't care DMA done */
-						req->req.actual =
-							req->req.length;
-					}
-				} else {
-					/* assume all bytes transferred */
+			/*
+			 * length bytes transfered
+			 * check dma done of last desc. in PPBDU mode
+			 */
+			if (use_dma_ppb_du) {
+				td = udc_get_last_dma_desc(req);
+				if (td) {
+					dma_done =
+						AMD_GETBITS(td->status,
+						UDC_DMA_IN_STS_BS);
+					/* don't care DMA done */
 					req->req.actual = req->req.length;
 				}
+			} else {
+				/* assume all bytes transferred */
+				req->req.actual = req->req.length;
+			}
 
-				if (req->req.actual == req->req.length) {
-					/* complete req */
-					complete_req(ep, req, 0);
-					req->dma_going = 0;
-					/* further request available ? */
-					if (list_empty(&ep->queue)) {
-						/* disable interrupt */
-						tmp = readl(
-							&dev->regs->ep_irqmsk);
-						tmp |= AMD_BIT(ep->num);
-						writel(tmp,
-							&dev->regs->ep_irqmsk);
-					}
-
+			if (req->req.actual == req->req.length) {
+				/* complete req */
+				complete_req(ep, req, 0);
+				req->dma_going = 0;
+				/* further request available ? */
+				if (list_empty(&ep->queue)) {
+					/* disable interrupt */
+					tmp = readl(&dev->regs->ep_irqmsk);
+					tmp |= AMD_BIT(ep->num);
+					writel(tmp, &dev->regs->ep_irqmsk);
 				}
 			}
 		}
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 72bae8f39d81..66450a1abc22 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1754,7 +1754,6 @@ static int __init at91udc_probe(struct platform_device *pdev)
 				IRQF_DISABLED, driver_name, udc)) {
 			DBG("request vbus irq %d failed\n",
 					udc->board.vbus_pin);
-			free_irq(udc->udp_irq, udc);
 			retval = -EBUSY;
 			goto fail3;
 		}
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c
index 9f80f4e970bd..a3a0f4a27ef0 100644
--- a/drivers/usb/gadget/audio.c
+++ b/drivers/usb/gadget/audio.c
@@ -106,20 +106,20 @@ static int audio_set_endpoint_req(struct usb_configuration *c,
 			ctrl->bRequest, w_value, len, ep);
 
 	switch (ctrl->bRequest) {
-	case SET_CUR:
+	case UAC_SET_CUR:
 		value = 0;
 		break;
 
-	case SET_MIN:
+	case UAC_SET_MIN:
 		break;
 
-	case SET_MAX:
+	case UAC_SET_MAX:
 		break;
 
-	case SET_RES:
+	case UAC_SET_RES:
 		break;
 
-	case SET_MEM:
+	case UAC_SET_MEM:
 		break;
 
 	default:
@@ -142,13 +142,13 @@ static int audio_get_endpoint_req(struct usb_configuration *c,
 			ctrl->bRequest, w_value, len, ep);
 
 	switch (ctrl->bRequest) {
-	case GET_CUR:
-	case GET_MIN:
-	case GET_MAX:
-	case GET_RES:
+	case UAC_GET_CUR:
+	case UAC_GET_MIN:
+	case UAC_GET_MAX:
+	case UAC_GET_RES:
 		value = 3;
 		break;
-	case GET_MEM:
+	case UAC_GET_MEM:
 		break;
 	default:
 		break;
@@ -171,11 +171,11 @@ audio_setup(struct usb_configuration *c, const struct usb_ctrlrequest *ctrl)
 	 * Audio class messages; interface activation uses set_alt().
 	 */
 	switch (ctrl->bRequestType) {
-	case USB_AUDIO_SET_ENDPOINT:
+	case USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_ENDPOINT:
 		value = audio_set_endpoint_req(c, ctrl);
 		break;
 
-	case USB_AUDIO_GET_ENDPOINT:
+	case USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT:
 		value = audio_get_endpoint_req(c, ctrl);
 		break;
 
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 59e85234fa0a..d05397ec8a18 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -602,7 +602,7 @@ static int get_string(struct usb_composite_dev *cdev,
 			}
 		}
 
-		for (len = 0; s->wData[len] && len <= 126; len++)
+		for (len = 0; len <= 126 && s->wData[len]; len++)
 			continue;
 		if (!len)
 			return -EINVAL;
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index a56b24d305f8..5e0966485188 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -1306,11 +1306,6 @@ restart:
 			setup = *(struct usb_ctrlrequest*) urb->setup_packet;
 			w_index = le16_to_cpu(setup.wIndex);
 			w_value = le16_to_cpu(setup.wValue);
-			if (le16_to_cpu(setup.wLength) !=
-					urb->transfer_buffer_length) {
-				status = -EOVERFLOW;
-				goto return_urb;
-			}
 
 			/* paranoia, in case of stale queued data */
 			list_for_each_entry (req, &ep->queue, queue) {
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index bd102f5052ba..f37de283d0ab 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -61,6 +61,11 @@
  * simpler, Microsoft pushes their own approach: RNDIS.  The published
  * RNDIS specs are ambiguous and appear to be incomplete, and are also
  * needlessly complex.  They borrow more from CDC ACM than CDC ECM.
+ *
+ * While CDC ECM, CDC Subset, and RNDIS are designed to extend the ethernet
+ * interface to the target, CDC EEM was designed to use ethernet over the USB
+ * link between the host and target.  CDC EEM is implemented as an alternative
+ * to those other protocols when that communication model is more appropriate
  */
 
 #define DRIVER_DESC		"Ethernet Gadget"
@@ -114,6 +119,7 @@ static inline bool has_rndis(void)
 #include "f_rndis.c"
 #include "rndis.c"
 #endif
+#include "f_eem.c"
 #include "u_ether.c"
 
 /*-------------------------------------------------------------------------*/
@@ -150,6 +156,10 @@ static inline bool has_rndis(void)
 #define RNDIS_VENDOR_NUM	0x0525	/* NetChip */
 #define RNDIS_PRODUCT_NUM	0xa4a2	/* Ethernet/RNDIS Gadget */
 
+/* For EEM gadgets */
+#define EEM_VENDOR_NUM	0x0525	/* INVALID - NEEDS TO BE ALLOCATED */
+#define EEM_PRODUCT_NUM	0xa4a1	/* INVALID - NEEDS TO BE ALLOCATED */
+
 /*-------------------------------------------------------------------------*/
 
 static struct usb_device_descriptor device_desc = {
@@ -246,8 +256,16 @@ static struct usb_configuration rndis_config_driver = {
 
 /*-------------------------------------------------------------------------*/
 
+#ifdef CONFIG_USB_ETH_EEM
+static int use_eem = 1;
+#else
+static int use_eem;
+#endif
+module_param(use_eem, bool, 0);
+MODULE_PARM_DESC(use_eem, "use CDC EEM mode");
+
 /*
- * We _always_ have an ECM or CDC Subset configuration.
+ * We _always_ have an ECM, CDC Subset, or EEM configuration.
  */
 static int __init eth_do_config(struct usb_configuration *c)
 {
@@ -258,7 +276,9 @@ static int __init eth_do_config(struct usb_configuration *c)
 		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 	}
 
-	if (can_support_ecm(c->cdev->gadget))
+	if (use_eem)
+		return eem_bind_config(c);
+	else if (can_support_ecm(c->cdev->gadget))
 		return ecm_bind_config(c, hostaddr);
 	else
 		return geth_bind_config(c, hostaddr);
@@ -286,7 +306,12 @@ static int __init eth_bind(struct usb_composite_dev *cdev)
 		return status;
 
 	/* set up main config label and device descriptor */
-	if (can_support_ecm(cdev->gadget)) {
+	if (use_eem) {
+		/* EEM */
+		eth_config_driver.label = "CDC Ethernet (EEM)";
+		device_desc.idVendor = cpu_to_le16(EEM_VENDOR_NUM);
+		device_desc.idProduct = cpu_to_le16(EEM_PRODUCT_NUM);
+	} else if (can_support_ecm(cdev->gadget)) {
 		/* ECM */
 		eth_config_driver.label = "CDC Ethernet (ECM)";
 	} else {
diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c
index 66527ba2d2ea..98e9bb977291 100644
--- a/drivers/usb/gadget/f_audio.c
+++ b/drivers/usb/gadget/f_audio.c
@@ -28,6 +28,9 @@ static int audio_buf_size = 48000;
 module_param(audio_buf_size, int, S_IRUGO);
 MODULE_PARM_DESC(audio_buf_size, "Audio buffer size");
 
+static int generic_set_cmd(struct usb_audio_control *con, u8 cmd, int value);
+static int generic_get_cmd(struct usb_audio_control *con, u8 cmd);
+
 /*
  * DESCRIPTORS ... most are static, but strings and full
  * configuration descriptors are built on demand.
@@ -50,16 +53,16 @@ static struct usb_interface_descriptor ac_interface_desc __initdata = {
 	.bInterfaceSubClass =	USB_SUBCLASS_AUDIOCONTROL,
 };
 
-DECLARE_USB_AC_HEADER_DESCRIPTOR(2);
+DECLARE_UAC_AC_HEADER_DESCRIPTOR(2);
 
-#define USB_DT_AC_HEADER_LENGH	USB_DT_AC_HEADER_SIZE(F_AUDIO_NUM_INTERFACES)
+#define UAC_DT_AC_HEADER_LENGTH	UAC_DT_AC_HEADER_SIZE(F_AUDIO_NUM_INTERFACES)
 /* B.3.2  Class-Specific AC Interface Descriptor */
-static struct usb_ac_header_descriptor_2 ac_header_desc = {
-	.bLength =		USB_DT_AC_HEADER_LENGH,
+static struct uac_ac_header_descriptor_2 ac_header_desc = {
+	.bLength =		UAC_DT_AC_HEADER_LENGTH,
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
-	.bDescriptorSubtype =	HEADER,
+	.bDescriptorSubtype =	UAC_HEADER,
 	.bcdADC =		__constant_cpu_to_le16(0x0100),
-	.wTotalLength =		__constant_cpu_to_le16(USB_DT_AC_HEADER_LENGH),
+	.wTotalLength =		__constant_cpu_to_le16(UAC_DT_AC_HEADER_LENGTH),
 	.bInCollection =	F_AUDIO_NUM_INTERFACES,
 	.baInterfaceNr = {
 		[0] =		F_AUDIO_AC_INTERFACE,
@@ -68,33 +71,33 @@ static struct usb_ac_header_descriptor_2 ac_header_desc = {
 };
 
 #define INPUT_TERMINAL_ID	1
-static struct usb_input_terminal_descriptor input_terminal_desc = {
-	.bLength =		USB_DT_AC_INPUT_TERMINAL_SIZE,
+static struct uac_input_terminal_descriptor input_terminal_desc = {
+	.bLength =		UAC_DT_INPUT_TERMINAL_SIZE,
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
-	.bDescriptorSubtype =	INPUT_TERMINAL,
+	.bDescriptorSubtype =	UAC_INPUT_TERMINAL,
 	.bTerminalID =		INPUT_TERMINAL_ID,
-	.wTerminalType =	USB_AC_TERMINAL_STREAMING,
+	.wTerminalType =	UAC_TERMINAL_STREAMING,
 	.bAssocTerminal =	0,
 	.wChannelConfig =	0x3,
 };
 
-DECLARE_USB_AC_FEATURE_UNIT_DESCRIPTOR(0);
+DECLARE_UAC_FEATURE_UNIT_DESCRIPTOR(0);
 
 #define FEATURE_UNIT_ID		2
-static struct usb_ac_feature_unit_descriptor_0 feature_unit_desc = {
-	.bLength		= USB_DT_AC_FEATURE_UNIT_SIZE(0),
+static struct uac_feature_unit_descriptor_0 feature_unit_desc = {
+	.bLength		= UAC_DT_FEATURE_UNIT_SIZE(0),
 	.bDescriptorType	= USB_DT_CS_INTERFACE,
-	.bDescriptorSubtype	= FEATURE_UNIT,
+	.bDescriptorSubtype	= UAC_FEATURE_UNIT,
 	.bUnitID		= FEATURE_UNIT_ID,
 	.bSourceID		= INPUT_TERMINAL_ID,
 	.bControlSize		= 2,
-	.bmaControls[0]		= (FU_MUTE | FU_VOLUME),
+	.bmaControls[0]		= (UAC_FU_MUTE | UAC_FU_VOLUME),
 };
 
 static struct usb_audio_control mute_control = {
 	.list = LIST_HEAD_INIT(mute_control.list),
 	.name = "Mute Control",
-	.type = MUTE_CONTROL,
+	.type = UAC_MUTE_CONTROL,
 	/* Todo: add real Mute control code */
 	.set = generic_set_cmd,
 	.get = generic_get_cmd,
@@ -103,7 +106,7 @@ static struct usb_audio_control mute_control = {
 static struct usb_audio_control volume_control = {
 	.list = LIST_HEAD_INIT(volume_control.list),
 	.name = "Volume Control",
-	.type = VOLUME_CONTROL,
+	.type = UAC_VOLUME_CONTROL,
 	/* Todo: add real Volume control code */
 	.set = generic_set_cmd,
 	.get = generic_get_cmd,
@@ -113,17 +116,17 @@ static struct usb_audio_control_selector feature_unit = {
 	.list = LIST_HEAD_INIT(feature_unit.list),
 	.id = FEATURE_UNIT_ID,
 	.name = "Mute & Volume Control",
-	.type = FEATURE_UNIT,
+	.type = UAC_FEATURE_UNIT,
 	.desc = (struct usb_descriptor_header *)&feature_unit_desc,
 };
 
 #define OUTPUT_TERMINAL_ID	3
-static struct usb_output_terminal_descriptor output_terminal_desc = {
-	.bLength		= USB_DT_AC_OUTPUT_TERMINAL_SIZE,
+static struct uac_output_terminal_descriptor output_terminal_desc = {
+	.bLength		= UAC_DT_OUTPUT_TERMINAL_SIZE,
 	.bDescriptorType	= USB_DT_CS_INTERFACE,
-	.bDescriptorSubtype	= OUTPUT_TERMINAL,
+	.bDescriptorSubtype	= UAC_OUTPUT_TERMINAL,
 	.bTerminalID		= OUTPUT_TERMINAL_ID,
-	.wTerminalType		= USB_AC_OUTPUT_TERMINAL_SPEAKER,
+	.wTerminalType		= UAC_OUTPUT_TERMINAL_SPEAKER,
 	.bAssocTerminal		= FEATURE_UNIT_ID,
 	.bSourceID		= FEATURE_UNIT_ID,
 };
@@ -148,22 +151,22 @@ static struct usb_interface_descriptor as_interface_alt_1_desc = {
 };
 
 /* B.4.2  Class-Specific AS Interface Descriptor */
-static struct usb_as_header_descriptor as_header_desc = {
-	.bLength =		USB_DT_AS_HEADER_SIZE,
+static struct uac_as_header_descriptor as_header_desc = {
+	.bLength =		UAC_DT_AS_HEADER_SIZE,
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
-	.bDescriptorSubtype =	AS_GENERAL,
+	.bDescriptorSubtype =	UAC_AS_GENERAL,
 	.bTerminalLink =	INPUT_TERMINAL_ID,
 	.bDelay =		1,
-	.wFormatTag =		USB_AS_AUDIO_FORMAT_TYPE_I_PCM,
+	.wFormatTag =		UAC_FORMAT_TYPE_I_PCM,
 };
 
-DECLARE_USB_AS_FORMAT_TYPE_I_DISCRETE_DESC(1);
+DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(1);
 
-static struct usb_as_formate_type_i_discrete_descriptor_1 as_type_i_desc = {
-	.bLength =		USB_AS_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(1),
+static struct uac_format_type_i_discrete_descriptor_1 as_type_i_desc = {
+	.bLength =		UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(1),
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
-	.bDescriptorSubtype =	FORMAT_TYPE,
-	.bFormatType =		USB_AS_FORMAT_TYPE_I,
+	.bDescriptorSubtype =	UAC_FORMAT_TYPE,
+	.bFormatType =		UAC_FORMAT_TYPE_I,
 	.bSubframeSize =	2,
 	.bBitResolution =	16,
 	.bSamFreqType =		1,
@@ -174,17 +177,17 @@ static struct usb_endpoint_descriptor as_out_ep_desc __initdata = {
 	.bLength =		USB_DT_ENDPOINT_AUDIO_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 	.bEndpointAddress =	USB_DIR_OUT,
-	.bmAttributes =		USB_AS_ENDPOINT_ADAPTIVE
+	.bmAttributes =		USB_ENDPOINT_SYNC_ADAPTIVE
 				| USB_ENDPOINT_XFER_ISOC,
 	.wMaxPacketSize =	__constant_cpu_to_le16(OUT_EP_MAX_PACKET_SIZE),
 	.bInterval =		4,
 };
 
 /* Class-specific AS ISO OUT Endpoint Descriptor */
-static struct usb_as_iso_endpoint_descriptor as_iso_out_desc __initdata = {
-	.bLength =		USB_AS_ISO_ENDPOINT_DESC_SIZE,
+static struct uac_iso_endpoint_descriptor as_iso_out_desc __initdata = {
+	.bLength =		UAC_ISO_ENDPOINT_DESC_SIZE,
 	.bDescriptorType =	USB_DT_CS_ENDPOINT,
-	.bDescriptorSubtype =	EP_GENERAL,
+	.bDescriptorSubtype =	UAC_EP_GENERAL,
 	.bmAttributes = 	1,
 	.bLockDelayUnits =	1,
 	.wLockDelay =		__constant_cpu_to_le16(1),
@@ -456,11 +459,11 @@ f_audio_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
 	 * Audio class messages; interface activation uses set_alt().
 	 */
 	switch (ctrl->bRequestType) {
-	case USB_AUDIO_SET_INTF:
+	case USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE:
 		value = audio_set_intf_req(f, ctrl);
 		break;
 
-	case USB_AUDIO_GET_INTF:
+	case USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE:
 		value = audio_get_intf_req(f, ctrl);
 		break;
 
@@ -632,6 +635,18 @@ f_audio_unbind(struct usb_configuration *c, struct usb_function *f)
 
 /*-------------------------------------------------------------------------*/
 
+static int generic_set_cmd(struct usb_audio_control *con, u8 cmd, int value)
+{
+	con->data[cmd] = value;
+
+	return 0;
+}
+
+static int generic_get_cmd(struct usb_audio_control *con, u8 cmd)
+{
+	return con->data[cmd];
+}
+
 /* Todo: add more control selecotor dynamically */
 int __init control_selector_init(struct f_audio *audio)
 {
@@ -642,10 +657,10 @@ int __init control_selector_init(struct f_audio *audio)
 	list_add(&mute_control.list, &feature_unit.control);
 	list_add(&volume_control.list, &feature_unit.control);
 
-	volume_control.data[_CUR] = 0xffc0;
-	volume_control.data[_MIN] = 0xe3a0;
-	volume_control.data[_MAX] = 0xfff0;
-	volume_control.data[_RES] = 0x0030;
+	volume_control.data[UAC__CUR] = 0xffc0;
+	volume_control.data[UAC__MIN] = 0xe3a0;
+	volume_control.data[UAC__MAX] = 0xfff0;
+	volume_control.data[UAC__RES] = 0x0030;
 
 	return 0;
 }
diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c
new file mode 100644
index 000000000000..0a577d5694fd
--- /dev/null
+++ b/drivers/usb/gadget/f_eem.c
@@ -0,0 +1,562 @@
+/*
+ * f_eem.c -- USB CDC Ethernet (EEM) link function driver
+ *
+ * Copyright (C) 2003-2005,2008 David Brownell
+ * Copyright (C) 2008 Nokia Corporation
+ * Copyright (C) 2009 EF Johnson Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/crc32.h>
+
+#include "u_ether.h"
+
+#define EEM_HLEN 2
+
+/*
+ * This function is a "CDC Ethernet Emulation Model" (CDC EEM)
+ * Ethernet link.
+ */
+
+struct eem_ep_descs {
+	struct usb_endpoint_descriptor	*in;
+	struct usb_endpoint_descriptor	*out;
+};
+
+struct f_eem {
+	struct gether			port;
+	u8				ctrl_id;
+
+	struct eem_ep_descs		fs;
+	struct eem_ep_descs		hs;
+};
+
+static inline struct f_eem *func_to_eem(struct usb_function *f)
+{
+	return container_of(f, struct f_eem, port.func);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* interface descriptor: */
+
+static struct usb_interface_descriptor eem_intf __initdata = {
+	.bLength =		sizeof eem_intf,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	/* .bInterfaceNumber = DYNAMIC */
+	.bNumEndpoints =	2,
+	.bInterfaceClass =	USB_CLASS_COMM,
+	.bInterfaceSubClass =	USB_CDC_SUBCLASS_EEM,
+	.bInterfaceProtocol =	USB_CDC_PROTO_EEM,
+	/* .iInterface = DYNAMIC */
+};
+
+/* full speed support: */
+
+static struct usb_endpoint_descriptor eem_fs_in_desc __initdata = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor eem_fs_out_desc __initdata = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_descriptor_header *eem_fs_function[] __initdata = {
+	/* CDC EEM control descriptors */
+	(struct usb_descriptor_header *) &eem_intf,
+	(struct usb_descriptor_header *) &eem_fs_in_desc,
+	(struct usb_descriptor_header *) &eem_fs_out_desc,
+	NULL,
+};
+
+/* high speed support: */
+
+static struct usb_endpoint_descriptor eem_hs_in_desc __initdata = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor eem_hs_out_desc __initdata = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_descriptor_header *eem_hs_function[] __initdata = {
+	/* CDC EEM control descriptors */
+	(struct usb_descriptor_header *) &eem_intf,
+	(struct usb_descriptor_header *) &eem_hs_in_desc,
+	(struct usb_descriptor_header *) &eem_hs_out_desc,
+	NULL,
+};
+
+/* string descriptors: */
+
+static struct usb_string eem_string_defs[] = {
+	[0].s = "CDC Ethernet Emulation Model (EEM)",
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings eem_string_table = {
+	.language =		0x0409,	/* en-us */
+	.strings =		eem_string_defs,
+};
+
+static struct usb_gadget_strings *eem_strings[] = {
+	&eem_string_table,
+	NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int eem_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
+{
+	struct usb_composite_dev *cdev = f->config->cdev;
+	int			value = -EOPNOTSUPP;
+	u16			w_index = le16_to_cpu(ctrl->wIndex);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+	u16			w_length = le16_to_cpu(ctrl->wLength);
+
+	DBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n",
+		ctrl->bRequestType, ctrl->bRequest,
+		w_value, w_index, w_length);
+
+	/* device either stalls (value < 0) or reports success */
+	return value;
+}
+
+
+static int eem_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+	struct f_eem		*eem = func_to_eem(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct net_device	*net;
+
+	/* we know alt == 0, so this is an activation or a reset */
+	if (alt != 0)
+		goto fail;
+
+	if (intf == eem->ctrl_id) {
+
+		if (eem->port.in_ep->driver_data) {
+			DBG(cdev, "reset eem\n");
+			gether_disconnect(&eem->port);
+		}
+
+		if (!eem->port.in) {
+			DBG(cdev, "init eem\n");
+			eem->port.in = ep_choose(cdev->gadget,
+					eem->hs.in, eem->fs.in);
+			eem->port.out = ep_choose(cdev->gadget,
+					eem->hs.out, eem->fs.out);
+		}
+
+		/* zlps should not occur because zero-length EEM packets
+		 * will be inserted in those cases where they would occur
+		 */
+		eem->port.is_zlp_ok = 1;
+		eem->port.cdc_filter = DEFAULT_FILTER;
+		DBG(cdev, "activate eem\n");
+		net = gether_connect(&eem->port);
+		if (IS_ERR(net))
+			return PTR_ERR(net);
+	} else
+		goto fail;
+
+	return 0;
+fail:
+	return -EINVAL;
+}
+
+static void eem_disable(struct usb_function *f)
+{
+	struct f_eem		*eem = func_to_eem(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	DBG(cdev, "eem deactivated\n");
+
+	if (eem->port.in_ep->driver_data)
+		gether_disconnect(&eem->port);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* EEM function driver setup/binding */
+
+static int __init
+eem_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_composite_dev *cdev = c->cdev;
+	struct f_eem		*eem = func_to_eem(f);
+	int			status;
+	struct usb_ep		*ep;
+
+	/* allocate instance-specific interface IDs */
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	eem->ctrl_id = status;
+	eem_intf.bInterfaceNumber = status;
+
+	status = -ENODEV;
+
+	/* allocate instance-specific endpoints */
+	ep = usb_ep_autoconfig(cdev->gadget, &eem_fs_in_desc);
+	if (!ep)
+		goto fail;
+	eem->port.in_ep = ep;
+	ep->driver_data = cdev;	/* claim */
+
+	ep = usb_ep_autoconfig(cdev->gadget, &eem_fs_out_desc);
+	if (!ep)
+		goto fail;
+	eem->port.out_ep = ep;
+	ep->driver_data = cdev;	/* claim */
+
+	status = -ENOMEM;
+
+	/* copy descriptors, and track endpoint copies */
+	f->descriptors = usb_copy_descriptors(eem_fs_function);
+	if (!f->descriptors)
+		goto fail;
+
+	eem->fs.in = usb_find_endpoint(eem_fs_function,
+			f->descriptors, &eem_fs_in_desc);
+	eem->fs.out = usb_find_endpoint(eem_fs_function,
+			f->descriptors, &eem_fs_out_desc);
+
+	/* support all relevant hardware speeds... we expect that when
+	 * hardware is dual speed, all bulk-capable endpoints work at
+	 * both speeds
+	 */
+	if (gadget_is_dualspeed(c->cdev->gadget)) {
+		eem_hs_in_desc.bEndpointAddress =
+				eem_fs_in_desc.bEndpointAddress;
+		eem_hs_out_desc.bEndpointAddress =
+				eem_fs_out_desc.bEndpointAddress;
+
+		/* copy descriptors, and track endpoint copies */
+		f->hs_descriptors = usb_copy_descriptors(eem_hs_function);
+		if (!f->hs_descriptors)
+			goto fail;
+
+		eem->hs.in = usb_find_endpoint(eem_hs_function,
+				f->hs_descriptors, &eem_hs_in_desc);
+		eem->hs.out = usb_find_endpoint(eem_hs_function,
+				f->hs_descriptors, &eem_hs_out_desc);
+	}
+
+	DBG(cdev, "CDC Ethernet (EEM): %s speed IN/%s OUT/%s\n",
+			gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+			eem->port.in_ep->name, eem->port.out_ep->name);
+	return 0;
+
+fail:
+	if (f->descriptors)
+		usb_free_descriptors(f->descriptors);
+
+	/* we might as well release our claims on endpoints */
+	if (eem->port.out)
+		eem->port.out_ep->driver_data = NULL;
+	if (eem->port.in)
+		eem->port.in_ep->driver_data = NULL;
+
+	ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
+
+	return status;
+}
+
+static void
+eem_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct f_eem	*eem = func_to_eem(f);
+
+	DBG(c->cdev, "eem unbind\n");
+
+	if (gadget_is_dualspeed(c->cdev->gadget))
+		usb_free_descriptors(f->hs_descriptors);
+	usb_free_descriptors(f->descriptors);
+	kfree(eem);
+}
+
+static void eem_cmd_complete(struct usb_ep *ep, struct usb_request *req)
+{
+}
+
+/*
+ * Add the EEM header and ethernet checksum.
+ * We currently do not attempt to put multiple ethernet frames
+ * into a single USB transfer
+ */
+static struct sk_buff *eem_wrap(struct gether *port, struct sk_buff *skb)
+{
+	struct sk_buff	*skb2 = NULL;
+	struct usb_ep	*in = port->in_ep;
+	int		padlen = 0;
+	u16		len = skb->len;
+
+	if (!skb_cloned(skb)) {
+		int headroom = skb_headroom(skb);
+		int tailroom = skb_tailroom(skb);
+
+		/* When (len + EEM_HLEN + ETH_FCS_LEN) % in->maxpacket) is 0,
+		 * stick two bytes of zero-length EEM packet on the end.
+		 */
+		if (((len + EEM_HLEN + ETH_FCS_LEN) % in->maxpacket) == 0)
+			padlen += 2;
+
+		if ((tailroom >= (ETH_FCS_LEN + padlen)) &&
+				(headroom >= EEM_HLEN))
+			goto done;
+	}
+
+	skb2 = skb_copy_expand(skb, EEM_HLEN, ETH_FCS_LEN + padlen, GFP_ATOMIC);
+	dev_kfree_skb_any(skb);
+	skb = skb2;
+	if (!skb)
+		return skb;
+
+done:
+	/* use the "no CRC" option */
+	put_unaligned_be32(0xdeadbeef, skb_put(skb, 4));
+
+	/* EEM packet header format:
+	 * b0..13:	length of ethernet frame
+	 * b14:		bmCRC (0 == sentinel CRC)
+	 * b15:		bmType (0 == data)
+	 */
+	len = skb->len;
+	put_unaligned_le16((len & 0x3FFF) | BIT(14), skb_push(skb, 2));
+
+	/* add a zero-length EEM packet, if needed */
+	if (padlen)
+		put_unaligned_le16(0, skb_put(skb, 2));
+
+	return skb;
+}
+
+/*
+ * Remove the EEM header.  Note that there can be many EEM packets in a single
+ * USB transfer, so we need to break them out and handle them independently.
+ */
+static int eem_unwrap(struct gether *port,
+			struct sk_buff *skb,
+			struct sk_buff_head *list)
+{
+	struct usb_composite_dev	*cdev = port->func.config->cdev;
+	int				status = 0;
+
+	do {
+		struct sk_buff	*skb2;
+		u16		header;
+		u16		len = 0;
+
+		if (skb->len < EEM_HLEN) {
+			status = -EINVAL;
+			DBG(cdev, "invalid EEM header\n");
+			goto error;
+		}
+
+		/* remove the EEM header */
+		header = get_unaligned_le16(skb->data);
+		skb_pull(skb, EEM_HLEN);
+
+		/* EEM packet header format:
+		 * b0..14:	EEM type dependent (data or command)
+		 * b15:		bmType (0 == data, 1 == command)
+		 */
+		if (header & BIT(15)) {
+			struct usb_request	*req = cdev->req;
+			u16			bmEEMCmd;
+
+			/* EEM command packet format:
+			 * b0..10:	bmEEMCmdParam
+			 * b11..13:	bmEEMCmd
+			 * b14:		reserved (must be zero)
+			 * b15:		bmType (1 == command)
+			 */
+			if (header & BIT(14))
+				continue;
+
+			bmEEMCmd = (header >> 11) & 0x7;
+			switch (bmEEMCmd) {
+			case 0: /* echo */
+				len = header & 0x7FF;
+				if (skb->len < len) {
+					status = -EOVERFLOW;
+					goto error;
+				}
+
+				skb2 = skb_clone(skb, GFP_ATOMIC);
+				if (unlikely(!skb2)) {
+					DBG(cdev, "EEM echo response error\n");
+					goto next;
+				}
+				skb_trim(skb2, len);
+				put_unaligned_le16(BIT(15) | BIT(11) | len,
+							skb_push(skb2, 2));
+				skb_copy_bits(skb, 0, req->buf, skb->len);
+				req->length = skb->len;
+				req->complete = eem_cmd_complete;
+				req->zero = 1;
+				if (usb_ep_queue(port->in_ep, req, GFP_ATOMIC))
+					DBG(cdev, "echo response queue fail\n");
+				break;
+
+			case 1:  /* echo response */
+			case 2:  /* suspend hint */
+			case 3:  /* response hint */
+			case 4:  /* response complete hint */
+			case 5:  /* tickle */
+			default: /* reserved */
+				continue;
+			}
+		} else {
+			u32		crc, crc2;
+			struct sk_buff	*skb3;
+
+			/* check for zero-length EEM packet */
+			if (header == 0)
+				continue;
+
+			/* EEM data packet format:
+			 * b0..13:	length of ethernet frame
+			 * b14:		bmCRC (0 == sentinel, 1 == calculated)
+			 * b15:		bmType (0 == data)
+			 */
+			len = header & 0x3FFF;
+			if ((skb->len < len)
+					|| (len < (ETH_HLEN + ETH_FCS_LEN))) {
+				status = -EINVAL;
+				goto error;
+			}
+
+			/* validate CRC */
+			crc = get_unaligned_le32(skb->data + len - ETH_FCS_LEN);
+			if (header & BIT(14)) {
+				crc = get_unaligned_le32(skb->data + len
+							- ETH_FCS_LEN);
+				crc2 = ~crc32_le(~0,
+						skb->data,
+						skb->len - ETH_FCS_LEN);
+			} else {
+				crc = get_unaligned_be32(skb->data + len
+							- ETH_FCS_LEN);
+				crc2 = 0xdeadbeef;
+			}
+			if (crc != crc2) {
+				DBG(cdev, "invalid EEM CRC\n");
+				goto next;
+			}
+
+			skb2 = skb_clone(skb, GFP_ATOMIC);
+			if (unlikely(!skb2)) {
+				DBG(cdev, "unable to unframe EEM packet\n");
+				continue;
+			}
+			skb_trim(skb2, len - ETH_FCS_LEN);
+
+			skb3 = skb_copy_expand(skb2,
+						NET_IP_ALIGN,
+						0,
+						GFP_ATOMIC);
+			if (unlikely(!skb3)) {
+				DBG(cdev, "unable to realign EEM packet\n");
+				dev_kfree_skb_any(skb2);
+				continue;
+			}
+			dev_kfree_skb_any(skb2);
+			skb_queue_tail(list, skb3);
+		}
+next:
+		skb_pull(skb, len);
+	} while (skb->len);
+
+error:
+	dev_kfree_skb_any(skb);
+	return status;
+}
+
+/**
+ * eem_bind_config - add CDC Ethernet (EEM) network link to a configuration
+ * @c: the configuration to support the network link
+ * Context: single threaded during gadget setup
+ *
+ * Returns zero on success, else negative errno.
+ *
+ * Caller must have called @gether_setup().  Caller is also responsible
+ * for calling @gether_cleanup() before module unload.
+ */
+int __init eem_bind_config(struct usb_configuration *c)
+{
+	struct f_eem	*eem;
+	int		status;
+
+	/* maybe allocate device-global string IDs */
+	if (eem_string_defs[0].id == 0) {
+
+		/* control interface label */
+		status = usb_string_id(c->cdev);
+		if (status < 0)
+			return status;
+		eem_string_defs[0].id = status;
+		eem_intf.iInterface = status;
+	}
+
+	/* allocate and initialize one new instance */
+	eem = kzalloc(sizeof *eem, GFP_KERNEL);
+	if (!eem)
+		return -ENOMEM;
+
+	eem->port.cdc_filter = DEFAULT_FILTER;
+
+	eem->port.func.name = "cdc_eem";
+	eem->port.func.strings = eem_strings;
+	/* descriptors are per-instance copies */
+	eem->port.func.bind = eem_bind;
+	eem->port.func.unbind = eem_unbind;
+	eem->port.func.set_alt = eem_set_alt;
+	eem->port.func.setup = eem_setup;
+	eem->port.func.disable = eem_disable;
+	eem->port.wrap = eem_wrap;
+	eem->port.unwrap = eem_unwrap;
+	eem->port.header_len = EEM_HLEN;
+
+	status = usb_add_function(c, &eem->port.func);
+	if (status)
+		kfree(eem);
+	return status;
+}
+
diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c
index eb6ddfc20857..6cb29d3df575 100644
--- a/drivers/usb/gadget/f_loopback.c
+++ b/drivers/usb/gadget/f_loopback.c
@@ -22,7 +22,6 @@
 /* #define VERBOSE_DEBUG */
 
 #include <linux/kernel.h>
-#include <linux/utsname.h>
 #include <linux/device.h>
 
 #include "g_zero.h"
diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c
index 46d6266f30ec..b4a3ba654ea5 100644
--- a/drivers/usb/gadget/f_obex.c
+++ b/drivers/usb/gadget/f_obex.c
@@ -24,7 +24,6 @@
 /* #define VERBOSE_DEBUG */
 
 #include <linux/kernel.h>
-#include <linux/utsname.h>
 #include <linux/device.h>
 
 #include "u_serial.h"
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 424a37c5773f..c9966cc07d3a 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -286,12 +286,17 @@ static struct usb_gadget_strings *rndis_strings[] = {
 
 /*-------------------------------------------------------------------------*/
 
-static struct sk_buff *rndis_add_header(struct sk_buff *skb)
+static struct sk_buff *rndis_add_header(struct gether *port,
+					struct sk_buff *skb)
 {
-	skb = skb_realloc_headroom(skb, sizeof(struct rndis_packet_msg_type));
-	if (skb)
-		rndis_add_hdr(skb);
-	return skb;
+	struct sk_buff *skb2;
+
+	skb2 = skb_realloc_headroom(skb, sizeof(struct rndis_packet_msg_type));
+	if (skb2)
+		rndis_add_hdr(skb2);
+
+	dev_kfree_skb_any(skb);
+	return skb2;
 }
 
 static void rndis_response_available(void *_rndis)
diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c
index bffe91d525f9..09cba273d2db 100644
--- a/drivers/usb/gadget/f_sourcesink.c
+++ b/drivers/usb/gadget/f_sourcesink.c
@@ -22,7 +22,6 @@
 /* #define VERBOSE_DEBUG */
 
 #include <linux/kernel.h>
-#include <linux/utsname.h>
 #include <linux/device.h>
 
 #include "g_zero.h"
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index d701bf4698d2..7881f12413c4 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -2751,6 +2751,10 @@ static int __devexit qe_udc_remove(struct of_device *ofdev)
 /*-------------------------------------------------------------------------*/
 static struct of_device_id __devinitdata qe_udc_match[] = {
 	{
+		.compatible = "fsl,mpc8323-qe-usb",
+		.data = (void *)PORT_QE,
+	},
+	{
 		.compatible = "fsl,mpc8360-qe-usb",
 		.data = (void *)PORT_QE,
 	},
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index 8e0e9a0b7364..f2d270b202f2 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -173,6 +173,12 @@
 // CONFIG_USB_GADGET_AU1X00
 // ...
 
+#ifdef CONFIG_USB_GADGET_R8A66597
+#define	gadget_is_r8a66597(g)	!strcmp("r8a66597_udc", (g)->name)
+#else
+#define	gadget_is_r8a66597(g)	0
+#endif
+
 
 /**
  * usb_gadget_controller_number - support bcdDevice id convention
@@ -239,6 +245,8 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
 		return 0x23;
 	else if (gadget_is_langwell(gadget))
 		return 0x24;
+	else if (gadget_is_r8a66597(gadget))
+		return 0x25;
 	return -ENOENT;
 }
 
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index b9312dc6e041..d0b1e836f0e0 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -191,7 +191,7 @@ module_param(qlen, uint, S_IRUGO);
 #define GMIDI_MS_INTERFACE	1
 #define GMIDI_NUM_INTERFACES	2
 
-DECLARE_USB_AC_HEADER_DESCRIPTOR(1);
+DECLARE_UAC_AC_HEADER_DESCRIPTOR(1);
 DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(1);
 DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(1);
 
@@ -237,12 +237,12 @@ static const struct usb_interface_descriptor ac_interface_desc = {
 };
 
 /* B.3.2  Class-Specific AC Interface Descriptor */
-static const struct usb_ac_header_descriptor_1 ac_header_desc = {
-	.bLength =		USB_DT_AC_HEADER_SIZE(1),
+static const struct uac_ac_header_descriptor_1 ac_header_desc = {
+	.bLength =		UAC_DT_AC_HEADER_SIZE(1),
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubtype =	USB_MS_HEADER,
 	.bcdADC =		cpu_to_le16(0x0100),
-	.wTotalLength =		cpu_to_le16(USB_DT_AC_HEADER_SIZE(1)),
+	.wTotalLength =		cpu_to_le16(UAC_DT_AC_HEADER_SIZE(1)),
 	.bInCollection =	1,
 	.baInterfaceNr = {
 		[0] =		GMIDI_MS_INTERFACE,
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 7d33f50b5874..c44367fea185 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -2033,7 +2033,7 @@ gadgetfs_create_file (struct super_block *sb, char const *name,
 	return inode;
 }
 
-static struct super_operations gadget_fs_operations = {
+static const struct super_operations gadget_fs_operations = {
 	.statfs =	simple_statfs,
 	.drop_inode =	generic_delete_inode,
 };
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index 43dcf9e1af6b..a8c8543d1b08 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -25,44 +25,18 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
-
+#include <linux/err.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 
 #include "m66592-udc.h"
 
-
 MODULE_DESCRIPTION("M66592 USB gadget driver");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Yoshihiro Shimoda");
 MODULE_ALIAS("platform:m66592_udc");
 
-#define DRIVER_VERSION	"18 Oct 2007"
-
-/* module parameters */
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592)
-static unsigned short endian = M66592_LITTLE;
-module_param(endian, ushort, 0644);
-MODULE_PARM_DESC(endian, "data endian: big=0, little=0 (default=0)");
-#else
-static unsigned short clock = M66592_XTAL24;
-module_param(clock, ushort, 0644);
-MODULE_PARM_DESC(clock, "input clock: 48MHz=32768, 24MHz=16384, 12MHz=0 "
-		"(default=16384)");
-
-static unsigned short vif = M66592_LDRV;
-module_param(vif, ushort, 0644);
-MODULE_PARM_DESC(vif, "input VIF: 3.3V=32768, 1.5V=0 (default=32768)");
-
-static unsigned short endian;
-module_param(endian, ushort, 0644);
-MODULE_PARM_DESC(endian, "data endian: big=256, little=0 (default=0)");
-
-static unsigned short irq_sense = M66592_INTL;
-module_param(irq_sense, ushort, 0644);
-MODULE_PARM_DESC(irq_sense, "IRQ sense: low level=2, falling edge=0 "
-		"(default=2)");
-#endif
+#define DRIVER_VERSION	"21 July 2009"
 
 static const char udc_name[] = "m66592_udc";
 static const char *m66592_ep_name[] = {
@@ -244,6 +218,7 @@ static inline int get_buffer_size(struct m66592 *m66592, u16 pipenum)
 static inline void pipe_change(struct m66592 *m66592, u16 pipenum)
 {
 	struct m66592_ep *ep = m66592->pipenum2ep[pipenum];
+	unsigned short mbw;
 
 	if (ep->use_dma)
 		return;
@@ -252,7 +227,12 @@ static inline void pipe_change(struct m66592 *m66592, u16 pipenum)
 
 	ndelay(450);
 
-	m66592_bset(m66592, M66592_MBW, ep->fifosel);
+	if (m66592->pdata->on_chip)
+		mbw = M66592_MBW_32;
+	else
+		mbw = M66592_MBW_16;
+
+	m66592_bset(m66592, mbw, ep->fifosel);
 }
 
 static int pipe_buffer_setting(struct m66592 *m66592,
@@ -276,24 +256,27 @@ static int pipe_buffer_setting(struct m66592 *m66592,
 		buf_bsize = 0;
 		break;
 	case M66592_BULK:
-		bufnum = m66592->bi_bufnum +
-			 (info->pipe - M66592_BASE_PIPENUM_BULK) * 16;
-		m66592->bi_bufnum += 16;
+		/* isochronous pipes may be used as bulk pipes */
+		if (info->pipe > M66592_BASE_PIPENUM_BULK)
+			bufnum = info->pipe - M66592_BASE_PIPENUM_BULK;
+		else
+			bufnum = info->pipe - M66592_BASE_PIPENUM_ISOC;
+
+		bufnum = M66592_BASE_BUFNUM + (bufnum * 16);
 		buf_bsize = 7;
 		pipecfg |= M66592_DBLB;
 		if (!info->dir_in)
 			pipecfg |= M66592_SHTNAK;
 		break;
 	case M66592_ISO:
-		bufnum = m66592->bi_bufnum +
+		bufnum = M66592_BASE_BUFNUM +
 			 (info->pipe - M66592_BASE_PIPENUM_ISOC) * 16;
-		m66592->bi_bufnum += 16;
 		buf_bsize = 7;
 		break;
 	}
-	if (m66592->bi_bufnum > M66592_MAX_BUFNUM) {
-		pr_err("m66592 pipe memory is insufficient(%d)\n",
-				m66592->bi_bufnum);
+
+	if (buf_bsize && ((bufnum + 16) >= M66592_MAX_BUFNUM)) {
+		pr_err("m66592 pipe memory is insufficient\n");
 		return -ENOMEM;
 	}
 
@@ -313,17 +296,6 @@ static void pipe_buffer_release(struct m66592 *m66592,
 	if (info->pipe == 0)
 		return;
 
-	switch (info->type) {
-	case M66592_BULK:
-		if (is_bulk_pipe(info->pipe))
-			m66592->bi_bufnum -= 16;
-		break;
-	case M66592_ISO:
-		if (is_isoc_pipe(info->pipe))
-			m66592->bi_bufnum -= 16;
-		break;
-	}
-
 	if (is_bulk_pipe(info->pipe)) {
 		m66592->bulk--;
 	} else if (is_interrupt_pipe(info->pipe))
@@ -340,6 +312,7 @@ static void pipe_buffer_release(struct m66592 *m66592,
 static void pipe_initialize(struct m66592_ep *ep)
 {
 	struct m66592 *m66592 = ep->m66592;
+	unsigned short mbw;
 
 	m66592_mdfy(m66592, 0, M66592_CURPIPE, ep->fifosel);
 
@@ -351,7 +324,12 @@ static void pipe_initialize(struct m66592_ep *ep)
 
 		ndelay(450);
 
-		m66592_bset(m66592, M66592_MBW, ep->fifosel);
+		if (m66592->pdata->on_chip)
+			mbw = M66592_MBW_32;
+		else
+			mbw = M66592_MBW_16;
+
+		m66592_bset(m66592, mbw, ep->fifosel);
 	}
 }
 
@@ -367,15 +345,13 @@ static void m66592_ep_setting(struct m66592 *m66592, struct m66592_ep *ep,
 			ep->fifosel = M66592_D0FIFOSEL;
 			ep->fifoctr = M66592_D0FIFOCTR;
 			ep->fifotrn = M66592_D0FIFOTRN;
-#if !defined(CONFIG_SUPERH_BUILT_IN_M66592)
-		} else if (m66592->num_dma == 1) {
+		} else if (!m66592->pdata->on_chip && m66592->num_dma == 1) {
 			m66592->num_dma++;
 			ep->use_dma = 1;
 			ep->fifoaddr = M66592_D1FIFO;
 			ep->fifosel = M66592_D1FIFOSEL;
 			ep->fifoctr = M66592_D1FIFOCTR;
 			ep->fifotrn = M66592_D1FIFOTRN;
-#endif
 		} else {
 			ep->use_dma = 0;
 			ep->fifoaddr = M66592_CFIFO;
@@ -620,76 +596,120 @@ static void start_ep0(struct m66592_ep *ep, struct m66592_request *req)
 	}
 }
 
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592)
 static void init_controller(struct m66592 *m66592)
 {
-	m66592_bset(m66592, M66592_HSE, M66592_SYSCFG);		/* High spd */
-	m66592_bclr(m66592, M66592_USBE, M66592_SYSCFG);
-	m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG);
-	m66592_bset(m66592, M66592_USBE, M66592_SYSCFG);
+	unsigned int endian;
 
-	/* This is a workaound for SH7722 2nd cut */
-	m66592_bset(m66592, 0x8000, M66592_DVSTCTR);
-	m66592_bset(m66592, 0x1000, M66592_TESTMODE);
-	m66592_bclr(m66592, 0x8000, M66592_DVSTCTR);
+	if (m66592->pdata->on_chip) {
+		if (m66592->pdata->endian)
+			endian = 0; /* big endian */
+		else
+			endian = M66592_LITTLE; /* little endian */
 
-	m66592_bset(m66592, M66592_INTL, M66592_INTENB1);
+		m66592_bset(m66592, M66592_HSE, M66592_SYSCFG);	/* High spd */
+		m66592_bclr(m66592, M66592_USBE, M66592_SYSCFG);
+		m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG);
+		m66592_bset(m66592, M66592_USBE, M66592_SYSCFG);
 
-	m66592_write(m66592, 0, M66592_CFBCFG);
-	m66592_write(m66592, 0, M66592_D0FBCFG);
-	m66592_bset(m66592, endian, M66592_CFBCFG);
-	m66592_bset(m66592, endian, M66592_D0FBCFG);
-}
-#else	/* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */
-static void init_controller(struct m66592 *m66592)
-{
-	m66592_bset(m66592, (vif & M66592_LDRV) | (endian & M66592_BIGEND),
-			M66592_PINCFG);
-	m66592_bset(m66592, M66592_HSE, M66592_SYSCFG);		/* High spd */
-	m66592_mdfy(m66592, clock & M66592_XTAL, M66592_XTAL, M66592_SYSCFG);
+		/* This is a workaound for SH7722 2nd cut */
+		m66592_bset(m66592, 0x8000, M66592_DVSTCTR);
+		m66592_bset(m66592, 0x1000, M66592_TESTMODE);
+		m66592_bclr(m66592, 0x8000, M66592_DVSTCTR);
 
-	m66592_bclr(m66592, M66592_USBE, M66592_SYSCFG);
-	m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG);
-	m66592_bset(m66592, M66592_USBE, M66592_SYSCFG);
+		m66592_bset(m66592, M66592_INTL, M66592_INTENB1);
+
+		m66592_write(m66592, 0, M66592_CFBCFG);
+		m66592_write(m66592, 0, M66592_D0FBCFG);
+		m66592_bset(m66592, endian, M66592_CFBCFG);
+		m66592_bset(m66592, endian, M66592_D0FBCFG);
+	} else {
+		unsigned int clock, vif, irq_sense;
+
+		if (m66592->pdata->endian)
+			endian = M66592_BIGEND; /* big endian */
+		else
+			endian = 0; /* little endian */
+
+		if (m66592->pdata->vif)
+			vif = M66592_LDRV; /* 3.3v */
+		else
+			vif = 0; /* 1.5v */
+
+		switch (m66592->pdata->xtal) {
+		case M66592_PLATDATA_XTAL_12MHZ:
+			clock = M66592_XTAL12;
+			break;
+		case M66592_PLATDATA_XTAL_24MHZ:
+			clock = M66592_XTAL24;
+			break;
+		case M66592_PLATDATA_XTAL_48MHZ:
+			clock = M66592_XTAL48;
+			break;
+		default:
+			pr_warning("m66592-udc: xtal configuration error\n");
+			clock = 0;
+		}
+
+		switch (m66592->irq_trigger) {
+		case IRQF_TRIGGER_LOW:
+			irq_sense = M66592_INTL;
+			break;
+		case IRQF_TRIGGER_FALLING:
+			irq_sense = 0;
+			break;
+		default:
+			pr_warning("m66592-udc: irq trigger config error\n");
+			irq_sense = 0;
+		}
 
-	m66592_bset(m66592, M66592_XCKE, M66592_SYSCFG);
+		m66592_bset(m66592,
+			    (vif & M66592_LDRV) | (endian & M66592_BIGEND),
+			    M66592_PINCFG);
+		m66592_bset(m66592, M66592_HSE, M66592_SYSCFG);	/* High spd */
+		m66592_mdfy(m66592, clock & M66592_XTAL, M66592_XTAL,
+			    M66592_SYSCFG);
+		m66592_bclr(m66592, M66592_USBE, M66592_SYSCFG);
+		m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG);
+		m66592_bset(m66592, M66592_USBE, M66592_SYSCFG);
+
+		m66592_bset(m66592, M66592_XCKE, M66592_SYSCFG);
 
-	msleep(3);
+		msleep(3);
 
-	m66592_bset(m66592, M66592_RCKE | M66592_PLLC, M66592_SYSCFG);
+		m66592_bset(m66592, M66592_RCKE | M66592_PLLC, M66592_SYSCFG);
 
-	msleep(1);
+		msleep(1);
 
-	m66592_bset(m66592, M66592_SCKE, M66592_SYSCFG);
+		m66592_bset(m66592, M66592_SCKE, M66592_SYSCFG);
 
-	m66592_bset(m66592, irq_sense & M66592_INTL, M66592_INTENB1);
-	m66592_write(m66592, M66592_BURST | M66592_CPU_ADR_RD_WR,
-			M66592_DMA0CFG);
+		m66592_bset(m66592, irq_sense & M66592_INTL, M66592_INTENB1);
+		m66592_write(m66592, M66592_BURST | M66592_CPU_ADR_RD_WR,
+			     M66592_DMA0CFG);
+	}
 }
-#endif	/* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */
 
 static void disable_controller(struct m66592 *m66592)
 {
-#if !defined(CONFIG_SUPERH_BUILT_IN_M66592)
-	m66592_bclr(m66592, M66592_SCKE, M66592_SYSCFG);
-	udelay(1);
-	m66592_bclr(m66592, M66592_PLLC, M66592_SYSCFG);
-	udelay(1);
-	m66592_bclr(m66592, M66592_RCKE, M66592_SYSCFG);
-	udelay(1);
-	m66592_bclr(m66592, M66592_XCKE, M66592_SYSCFG);
-#endif
+	if (!m66592->pdata->on_chip) {
+		m66592_bclr(m66592, M66592_SCKE, M66592_SYSCFG);
+		udelay(1);
+		m66592_bclr(m66592, M66592_PLLC, M66592_SYSCFG);
+		udelay(1);
+		m66592_bclr(m66592, M66592_RCKE, M66592_SYSCFG);
+		udelay(1);
+		m66592_bclr(m66592, M66592_XCKE, M66592_SYSCFG);
+	}
 }
 
 static void m66592_start_xclock(struct m66592 *m66592)
 {
-#if !defined(CONFIG_SUPERH_BUILT_IN_M66592)
 	u16 tmp;
 
-	tmp = m66592_read(m66592, M66592_SYSCFG);
-	if (!(tmp & M66592_XCKE))
-		m66592_bset(m66592, M66592_XCKE, M66592_SYSCFG);
-#endif
+	if (!m66592->pdata->on_chip) {
+		tmp = m66592_read(m66592, M66592_SYSCFG);
+		if (!(tmp & M66592_XCKE))
+			m66592_bset(m66592, M66592_XCKE, M66592_SYSCFG);
+	}
 }
 
 /*-------------------------------------------------------------------------*/
@@ -1177,8 +1197,7 @@ static irqreturn_t m66592_irq(int irq, void *_m66592)
 	intsts0 = m66592_read(m66592, M66592_INTSTS0);
 	intenb0 = m66592_read(m66592, M66592_INTENB0);
 
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592)
-	if (!intsts0 && !intenb0) {
+	if (m66592->pdata->on_chip && !intsts0 && !intenb0) {
 		/*
 		 * When USB clock stops, it cannot read register. Even if a
 		 * clock stops, the interrupt occurs. So this driver turn on
@@ -1188,7 +1207,6 @@ static irqreturn_t m66592_irq(int irq, void *_m66592)
 		intsts0 = m66592_read(m66592, M66592_INTSTS0);
 		intenb0 = m66592_read(m66592, M66592_INTENB0);
 	}
-#endif
 
 	savepipe = m66592_read(m66592, M66592_CFIFOSEL);
 
@@ -1534,9 +1552,11 @@ static int __exit m66592_remove(struct platform_device *pdev)
 	iounmap(m66592->reg);
 	free_irq(platform_get_irq(pdev, 0), m66592);
 	m66592_free_request(&m66592->ep[0].ep, m66592->ep0_req);
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK)
-	clk_disable(m66592->clk);
-	clk_put(m66592->clk);
+#ifdef CONFIG_HAVE_CLK
+	if (m66592->pdata->on_chip) {
+		clk_disable(m66592->clk);
+		clk_put(m66592->clk);
+	}
 #endif
 	kfree(m66592);
 	return 0;
@@ -1548,11 +1568,10 @@ static void nop_completion(struct usb_ep *ep, struct usb_request *r)
 
 static int __init m66592_probe(struct platform_device *pdev)
 {
-	struct resource *res;
-	int irq;
+	struct resource *res, *ires;
 	void __iomem *reg = NULL;
 	struct m66592 *m66592 = NULL;
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
 	char clk_name[8];
 #endif
 	int ret = 0;
@@ -1565,10 +1584,11 @@ static int __init m66592_probe(struct platform_device *pdev)
 		goto clean_up;
 	}
 
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
+	ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!ires) {
 		ret = -ENODEV;
-		pr_err("platform_get_irq error.\n");
+		dev_err(&pdev->dev,
+			"platform_get_resource IORESOURCE_IRQ error.\n");
 		goto clean_up;
 	}
 
@@ -1579,6 +1599,12 @@ static int __init m66592_probe(struct platform_device *pdev)
 		goto clean_up;
 	}
 
+	if (pdev->dev.platform_data == NULL) {
+		dev_err(&pdev->dev, "no platform data\n");
+		ret = -ENODEV;
+		goto clean_up;
+	}
+
 	/* initialize ucd */
 	m66592 = kzalloc(sizeof(struct m66592), GFP_KERNEL);
 	if (m66592 == NULL) {
@@ -1586,6 +1612,9 @@ static int __init m66592_probe(struct platform_device *pdev)
 		goto clean_up;
 	}
 
+	m66592->pdata = pdev->dev.platform_data;
+	m66592->irq_trigger = ires->flags & IRQF_TRIGGER_MASK;
+
 	spin_lock_init(&m66592->lock);
 	dev_set_drvdata(&pdev->dev, m66592);
 
@@ -1603,24 +1632,25 @@ static int __init m66592_probe(struct platform_device *pdev)
 	m66592->timer.data = (unsigned long)m66592;
 	m66592->reg = reg;
 
-	m66592->bi_bufnum = M66592_BASE_BUFNUM;
-
-	ret = request_irq(irq, m66592_irq, IRQF_DISABLED | IRQF_SHARED,
+	ret = request_irq(ires->start, m66592_irq, IRQF_DISABLED | IRQF_SHARED,
 			udc_name, m66592);
 	if (ret < 0) {
 		pr_err("request_irq error (%d)\n", ret);
 		goto clean_up;
 	}
 
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK)
-	snprintf(clk_name, sizeof(clk_name), "usbf%d", pdev->id);
-	m66592->clk = clk_get(&pdev->dev, clk_name);
-	if (IS_ERR(m66592->clk)) {
-		dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name);
-		ret = PTR_ERR(m66592->clk);
-		goto clean_up2;
+#ifdef CONFIG_HAVE_CLK
+	if (m66592->pdata->on_chip) {
+		snprintf(clk_name, sizeof(clk_name), "usbf%d", pdev->id);
+		m66592->clk = clk_get(&pdev->dev, clk_name);
+		if (IS_ERR(m66592->clk)) {
+			dev_err(&pdev->dev, "cannot get clock \"%s\"\n",
+				clk_name);
+			ret = PTR_ERR(m66592->clk);
+			goto clean_up2;
+		}
+		clk_enable(m66592->clk);
 	}
-	clk_enable(m66592->clk);
 #endif
 	INIT_LIST_HEAD(&m66592->gadget.ep_list);
 	m66592->gadget.ep0 = &m66592->ep[0].ep;
@@ -1662,12 +1692,14 @@ static int __init m66592_probe(struct platform_device *pdev)
 	return 0;
 
 clean_up3:
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK)
-	clk_disable(m66592->clk);
-	clk_put(m66592->clk);
+#ifdef CONFIG_HAVE_CLK
+	if (m66592->pdata->on_chip) {
+		clk_disable(m66592->clk);
+		clk_put(m66592->clk);
+	}
 clean_up2:
 #endif
-	free_irq(irq, m66592);
+	free_irq(ires->start, m66592);
 clean_up:
 	if (m66592) {
 		if (m66592->ep0_req)
diff --git a/drivers/usb/gadget/m66592-udc.h b/drivers/usb/gadget/m66592-udc.h
index 286ce07e7960..8b960deed680 100644
--- a/drivers/usb/gadget/m66592-udc.h
+++ b/drivers/usb/gadget/m66592-udc.h
@@ -23,10 +23,12 @@
 #ifndef __M66592_UDC_H__
 #define __M66592_UDC_H__
 
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
 #include <linux/clk.h>
 #endif
 
+#include <linux/usb/m66592.h>
+
 #define M66592_SYSCFG		0x00
 #define M66592_XTAL		0xC000	/* b15-14: Crystal selection */
 #define   M66592_XTAL48		 0x8000		/* 48MHz */
@@ -76,11 +78,11 @@
 #define   M66592_P_TST_J	 0x0001		/* PERI TEST J */
 #define   M66592_P_TST_NORMAL	 0x0000		/* PERI Normal Mode */
 
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592)
+/* built-in registers */
 #define M66592_CFBCFG		0x0A
 #define M66592_D0FBCFG		0x0C
 #define M66592_LITTLE		0x0100	/* b8: Little endian mode */
-#else
+/* external chip case */
 #define M66592_PINCFG		0x0A
 #define M66592_LDRV		0x8000	/* b15: Drive Current Adjust */
 #define M66592_BIGEND		0x0100	/* b8: Big endian mode */
@@ -100,8 +102,8 @@
 #define M66592_PKTM		0x0020	/* b5: Packet mode */
 #define M66592_DENDE		0x0010	/* b4: Dend enable */
 #define M66592_OBUS		0x0004	/* b2: OUTbus mode */
-#endif	/* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */
 
+/* common case */
 #define M66592_CFIFO		0x10
 #define M66592_D0FIFO		0x14
 #define M66592_D1FIFO		0x18
@@ -113,13 +115,9 @@
 #define M66592_REW		0x4000	/* b14: Buffer rewind */
 #define M66592_DCLRM		0x2000	/* b13: DMA buffer clear mode */
 #define M66592_DREQE		0x1000	/* b12: DREQ output enable */
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592)
-#define M66592_MBW		0x0800	/* b11: Maximum bit width for FIFO */
-#else
-#define M66592_MBW		0x0400	/* b10: Maximum bit width for FIFO */
-#define   M66592_MBW_8		 0x0000   /*  8bit */
-#define   M66592_MBW_16		 0x0400   /* 16bit */
-#endif	/* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */
+#define M66592_MBW_8		0x0000   /*  8bit */
+#define M66592_MBW_16		0x0400   /* 16bit */
+#define M66592_MBW_32		0x0800   /* 32bit */
 #define M66592_TRENB		0x0200	/* b9: Transaction counter enable */
 #define M66592_TRCLR		0x0100	/* b8: Transaction counter clear */
 #define M66592_DEZPM		0x0080	/* b7: Zero-length packet mode */
@@ -480,9 +478,11 @@ struct m66592_ep {
 struct m66592 {
 	spinlock_t		lock;
 	void __iomem		*reg;
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
 	struct clk *clk;
 #endif
+	struct m66592_platdata	*pdata;
+	unsigned long		irq_trigger;
 
 	struct usb_gadget		gadget;
 	struct usb_gadget_driver	*driver;
@@ -506,7 +506,6 @@ struct m66592 {
 	int interrupt;
 	int isochronous;
 	int num_dma;
-	int bi_bufnum;	/* bulk and isochronous's bufnum */
 };
 
 #define gadget_to_m66592(_gadget) container_of(_gadget, struct m66592, gadget)
@@ -547,13 +546,13 @@ static inline void m66592_read_fifo(struct m66592 *m66592,
 {
 	unsigned long fifoaddr = (unsigned long)m66592->reg + offset;
 
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592)
-	len = (len + 3) / 4;
-	insl(fifoaddr, buf, len);
-#else
-	len = (len + 1) / 2;
-	insw(fifoaddr, buf, len);
-#endif
+	if (m66592->pdata->on_chip) {
+		len = (len + 3) / 4;
+		insl(fifoaddr, buf, len);
+	} else {
+		len = (len + 1) / 2;
+		insw(fifoaddr, buf, len);
+	}
 }
 
 static inline void m66592_write(struct m66592 *m66592, u16 val,
@@ -567,33 +566,34 @@ static inline void m66592_write_fifo(struct m66592 *m66592,
 		void *buf, unsigned long len)
 {
 	unsigned long fifoaddr = (unsigned long)m66592->reg + offset;
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592)
-	unsigned long count;
-	unsigned char *pb;
-	int i;
-
-	count = len / 4;
-	outsl(fifoaddr, buf, count);
-
-	if (len & 0x00000003) {
-		pb = buf + count * 4;
-		for (i = 0; i < (len & 0x00000003); i++) {
-			if (m66592_read(m66592, M66592_CFBCFG))	/* little */
-				outb(pb[i], fifoaddr + (3 - i));
-			else
-				outb(pb[i], fifoaddr + i);
+
+	if (m66592->pdata->on_chip) {
+		unsigned long count;
+		unsigned char *pb;
+		int i;
+
+		count = len / 4;
+		outsl(fifoaddr, buf, count);
+
+		if (len & 0x00000003) {
+			pb = buf + count * 4;
+			for (i = 0; i < (len & 0x00000003); i++) {
+				if (m66592_read(m66592, M66592_CFBCFG))	/* le */
+					outb(pb[i], fifoaddr + (3 - i));
+				else
+					outb(pb[i], fifoaddr + i);
+			}
+		}
+	} else {
+		unsigned long odd = len & 0x0001;
+
+		len = len / 2;
+		outsw(fifoaddr, buf, len);
+		if (odd) {
+			unsigned char *p = buf + len*2;
+			outb(*p, fifoaddr);
 		}
 	}
-#else
-	unsigned long odd = len & 0x0001;
-
-	len = len / 2;
-	outsw(fifoaddr, buf, len);
-	if (odd) {
-		unsigned char *p = buf + len*2;
-		outb(*p, fifoaddr);
-	}
-#endif	/* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */
 }
 
 static inline void m66592_mdfy(struct m66592 *m66592, u16 val, u16 pat,
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index ed21e263f832..e6fedbd5a654 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -56,6 +56,7 @@
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
 
 /*
  * This driver is PXA25x only.  Grab the right register definitions.
@@ -1008,15 +1009,27 @@ static int pxa25x_udc_pullup(struct usb_gadget *_gadget, int is_active)
 	return 0;
 }
 
+/* boards may consume current from VBUS, up to 100-500mA based on config.
+ * the 500uA suspend ceiling means that exclusively vbus-powered PXA designs
+ * violate USB specs.
+ */
+static int pxa25x_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
+{
+	struct pxa25x_udc	*udc;
+
+	udc = container_of(_gadget, struct pxa25x_udc, gadget);
+
+	if (udc->transceiver)
+		return otg_set_power(udc->transceiver, mA);
+	return -EOPNOTSUPP;
+}
+
 static const struct usb_gadget_ops pxa25x_udc_ops = {
 	.get_frame	= pxa25x_udc_get_frame,
 	.wakeup		= pxa25x_udc_wakeup,
 	.vbus_session	= pxa25x_udc_vbus_session,
 	.pullup		= pxa25x_udc_pullup,
-
-	// .vbus_draw ... boards may consume current from VBUS, up to
-	// 100-500mA based on config.  the 500uA suspend ceiling means
-	// that exclusively vbus-powered PXA designs violate USB specs.
+	.vbus_draw	= pxa25x_udc_vbus_draw,
 };
 
 /*-------------------------------------------------------------------------*/
@@ -1303,9 +1316,23 @@ fail:
 	 * for set_configuration as well as eventual disconnect.
 	 */
 	DMSG("registered gadget driver '%s'\n", driver->driver.name);
+
+	/* connect to bus through transceiver */
+	if (dev->transceiver) {
+		retval = otg_set_peripheral(dev->transceiver, &dev->gadget);
+		if (retval) {
+			DMSG("can't bind to transceiver\n");
+			if (driver->unbind)
+				driver->unbind(&dev->gadget);
+			goto bind_fail;
+		}
+	}
+
 	pullup(dev);
 	dump_state(dev);
 	return 0;
+bind_fail:
+	return retval;
 }
 EXPORT_SYMBOL(usb_gadget_register_driver);
 
@@ -1351,6 +1378,9 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 	stop_activity(dev, driver);
 	local_irq_enable();
 
+	if (dev->transceiver)
+		(void) otg_set_peripheral(dev->transceiver, NULL);
+
 	driver->unbind(&dev->gadget);
 	dev->gadget.dev.driver = NULL;
 	dev->driver = NULL;
@@ -2162,6 +2192,8 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 	dev->dev = &pdev->dev;
 	dev->mach = pdev->dev.platform_data;
 
+	dev->transceiver = otg_get_transceiver();
+
 	if (gpio_is_valid(dev->mach->gpio_vbus)) {
 		if ((retval = gpio_request(dev->mach->gpio_vbus,
 				"pxa25x_udc GPIO VBUS"))) {
@@ -2264,6 +2296,10 @@ lubbock_fail0:
 	if (gpio_is_valid(dev->mach->gpio_vbus))
 		gpio_free(dev->mach->gpio_vbus);
  err_gpio_vbus:
+	if (dev->transceiver) {
+		otg_put_transceiver(dev->transceiver);
+		dev->transceiver = NULL;
+	}
 	clk_put(dev->clk);
  err_clk:
 	return retval;
@@ -2305,6 +2341,11 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev)
 
 	clk_put(dev->clk);
 
+	if (dev->transceiver) {
+		otg_put_transceiver(dev->transceiver);
+		dev->transceiver = NULL;
+	}
+
 	platform_set_drvdata(pdev, NULL);
 	the_controller = NULL;
 	return 0;
diff --git a/drivers/usb/gadget/pxa25x_udc.h b/drivers/usb/gadget/pxa25x_udc.h
index 1d51aa21e6eb..f572c5617462 100644
--- a/drivers/usb/gadget/pxa25x_udc.h
+++ b/drivers/usb/gadget/pxa25x_udc.h
@@ -128,6 +128,7 @@ struct pxa25x_udc {
 	struct device				*dev;
 	struct clk				*clk;
 	struct pxa2xx_udc_mach_info		*mach;
+	struct otg_transceiver			*transceiver;
 	u64					dma_mask;
 	struct pxa25x_ep			ep [PXA_UDC_NUM_ENDPOINTS];
 
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
new file mode 100644
index 000000000000..e220fb8091a3
--- /dev/null
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -0,0 +1,1689 @@
+/*
+ * R8A66597 UDC (USB gadget)
+ *
+ * Copyright (C) 2006-2009 Renesas Solutions Corp.
+ *
+ * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include "r8a66597-udc.h"
+
+#define DRIVER_VERSION	"2009-08-18"
+
+static const char udc_name[] = "r8a66597_udc";
+static const char *r8a66597_ep_name[] = {
+	"ep0", "ep1", "ep2", "ep3", "ep4", "ep5", "ep6", "ep7",
+	"ep8", "ep9",
+};
+
+static void disable_controller(struct r8a66597 *r8a66597);
+static void irq_ep0_write(struct r8a66597_ep *ep, struct r8a66597_request *req);
+static void irq_packet_write(struct r8a66597_ep *ep,
+				struct r8a66597_request *req);
+static int r8a66597_queue(struct usb_ep *_ep, struct usb_request *_req,
+			gfp_t gfp_flags);
+
+static void transfer_complete(struct r8a66597_ep *ep,
+		struct r8a66597_request *req, int status);
+
+/*-------------------------------------------------------------------------*/
+static inline u16 get_usb_speed(struct r8a66597 *r8a66597)
+{
+	return r8a66597_read(r8a66597, DVSTCTR0) & RHST;
+}
+
+static void enable_pipe_irq(struct r8a66597 *r8a66597, u16 pipenum,
+		unsigned long reg)
+{
+	u16 tmp;
+
+	tmp = r8a66597_read(r8a66597, INTENB0);
+	r8a66597_bclr(r8a66597, BEMPE | NRDYE | BRDYE,
+			INTENB0);
+	r8a66597_bset(r8a66597, (1 << pipenum), reg);
+	r8a66597_write(r8a66597, tmp, INTENB0);
+}
+
+static void disable_pipe_irq(struct r8a66597 *r8a66597, u16 pipenum,
+		unsigned long reg)
+{
+	u16 tmp;
+
+	tmp = r8a66597_read(r8a66597, INTENB0);
+	r8a66597_bclr(r8a66597, BEMPE | NRDYE | BRDYE,
+			INTENB0);
+	r8a66597_bclr(r8a66597, (1 << pipenum), reg);
+	r8a66597_write(r8a66597, tmp, INTENB0);
+}
+
+static void r8a66597_usb_connect(struct r8a66597 *r8a66597)
+{
+	r8a66597_bset(r8a66597, CTRE, INTENB0);
+	r8a66597_bset(r8a66597, BEMPE | BRDYE, INTENB0);
+
+	r8a66597_bset(r8a66597, DPRPU, SYSCFG0);
+}
+
+static void r8a66597_usb_disconnect(struct r8a66597 *r8a66597)
+__releases(r8a66597->lock)
+__acquires(r8a66597->lock)
+{
+	r8a66597_bclr(r8a66597, CTRE, INTENB0);
+	r8a66597_bclr(r8a66597, BEMPE | BRDYE, INTENB0);
+	r8a66597_bclr(r8a66597, DPRPU, SYSCFG0);
+
+	r8a66597->gadget.speed = USB_SPEED_UNKNOWN;
+	spin_unlock(&r8a66597->lock);
+	r8a66597->driver->disconnect(&r8a66597->gadget);
+	spin_lock(&r8a66597->lock);
+
+	disable_controller(r8a66597);
+	INIT_LIST_HEAD(&r8a66597->ep[0].queue);
+}
+
+static inline u16 control_reg_get_pid(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	u16 pid = 0;
+	unsigned long offset;
+
+	if (pipenum == 0)
+		pid = r8a66597_read(r8a66597, DCPCTR) & PID;
+	else if (pipenum < R8A66597_MAX_NUM_PIPE) {
+		offset = get_pipectr_addr(pipenum);
+		pid = r8a66597_read(r8a66597, offset) & PID;
+	} else
+		printk(KERN_ERR "unexpect pipe num (%d)\n", pipenum);
+
+	return pid;
+}
+
+static inline void control_reg_set_pid(struct r8a66597 *r8a66597, u16 pipenum,
+		u16 pid)
+{
+	unsigned long offset;
+
+	if (pipenum == 0)
+		r8a66597_mdfy(r8a66597, pid, PID, DCPCTR);
+	else if (pipenum < R8A66597_MAX_NUM_PIPE) {
+		offset = get_pipectr_addr(pipenum);
+		r8a66597_mdfy(r8a66597, pid, PID, offset);
+	} else
+		printk(KERN_ERR "unexpect pipe num (%d)\n", pipenum);
+}
+
+static inline void pipe_start(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	control_reg_set_pid(r8a66597, pipenum, PID_BUF);
+}
+
+static inline void pipe_stop(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	control_reg_set_pid(r8a66597, pipenum, PID_NAK);
+}
+
+static inline void pipe_stall(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	control_reg_set_pid(r8a66597, pipenum, PID_STALL);
+}
+
+static inline u16 control_reg_get(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	u16 ret = 0;
+	unsigned long offset;
+
+	if (pipenum == 0)
+		ret = r8a66597_read(r8a66597, DCPCTR);
+	else if (pipenum < R8A66597_MAX_NUM_PIPE) {
+		offset = get_pipectr_addr(pipenum);
+		ret = r8a66597_read(r8a66597, offset);
+	} else
+		printk(KERN_ERR "unexpect pipe num (%d)\n", pipenum);
+
+	return ret;
+}
+
+static inline void control_reg_sqclr(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	unsigned long offset;
+
+	pipe_stop(r8a66597, pipenum);
+
+	if (pipenum == 0)
+		r8a66597_bset(r8a66597, SQCLR, DCPCTR);
+	else if (pipenum < R8A66597_MAX_NUM_PIPE) {
+		offset = get_pipectr_addr(pipenum);
+		r8a66597_bset(r8a66597, SQCLR, offset);
+	} else
+		printk(KERN_ERR "unexpect pipe num(%d)\n", pipenum);
+}
+
+static inline int get_buffer_size(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	u16 tmp;
+	int size;
+
+	if (pipenum == 0) {
+		tmp = r8a66597_read(r8a66597, DCPCFG);
+		if ((tmp & R8A66597_CNTMD) != 0)
+			size = 256;
+		else {
+			tmp = r8a66597_read(r8a66597, DCPMAXP);
+			size = tmp & MAXP;
+		}
+	} else {
+		r8a66597_write(r8a66597, pipenum, PIPESEL);
+		tmp = r8a66597_read(r8a66597, PIPECFG);
+		if ((tmp & R8A66597_CNTMD) != 0) {
+			tmp = r8a66597_read(r8a66597, PIPEBUF);
+			size = ((tmp >> 10) + 1) * 64;
+		} else {
+			tmp = r8a66597_read(r8a66597, PIPEMAXP);
+			size = tmp & MXPS;
+		}
+	}
+
+	return size;
+}
+
+static inline unsigned short mbw_value(struct r8a66597 *r8a66597)
+{
+	if (r8a66597->pdata->on_chip)
+		return MBW_32;
+	else
+		return MBW_16;
+}
+
+static inline void pipe_change(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	struct r8a66597_ep *ep = r8a66597->pipenum2ep[pipenum];
+
+	if (ep->use_dma)
+		return;
+
+	r8a66597_mdfy(r8a66597, pipenum, CURPIPE, ep->fifosel);
+
+	ndelay(450);
+
+	r8a66597_bset(r8a66597, mbw_value(r8a66597), ep->fifosel);
+}
+
+static int pipe_buffer_setting(struct r8a66597 *r8a66597,
+		struct r8a66597_pipe_info *info)
+{
+	u16 bufnum = 0, buf_bsize = 0;
+	u16 pipecfg = 0;
+
+	if (info->pipe == 0)
+		return -EINVAL;
+
+	r8a66597_write(r8a66597, info->pipe, PIPESEL);
+
+	if (info->dir_in)
+		pipecfg |= R8A66597_DIR;
+	pipecfg |= info->type;
+	pipecfg |= info->epnum;
+	switch (info->type) {
+	case R8A66597_INT:
+		bufnum = 4 + (info->pipe - R8A66597_BASE_PIPENUM_INT);
+		buf_bsize = 0;
+		break;
+	case R8A66597_BULK:
+		/* isochronous pipes may be used as bulk pipes */
+		if (info->pipe > R8A66597_BASE_PIPENUM_BULK)
+			bufnum = info->pipe - R8A66597_BASE_PIPENUM_BULK;
+		else
+			bufnum = info->pipe - R8A66597_BASE_PIPENUM_ISOC;
+
+		bufnum = R8A66597_BASE_BUFNUM + (bufnum * 16);
+		buf_bsize = 7;
+		pipecfg |= R8A66597_DBLB;
+		if (!info->dir_in)
+			pipecfg |= R8A66597_SHTNAK;
+		break;
+	case R8A66597_ISO:
+		bufnum = R8A66597_BASE_BUFNUM +
+			 (info->pipe - R8A66597_BASE_PIPENUM_ISOC) * 16;
+		buf_bsize = 7;
+		break;
+	}
+
+	if (buf_bsize && ((bufnum + 16) >= R8A66597_MAX_BUFNUM)) {
+		pr_err(KERN_ERR "r8a66597 pipe memory is insufficient\n");
+		return -ENOMEM;
+	}
+
+	r8a66597_write(r8a66597, pipecfg, PIPECFG);
+	r8a66597_write(r8a66597, (buf_bsize << 10) | (bufnum), PIPEBUF);
+	r8a66597_write(r8a66597, info->maxpacket, PIPEMAXP);
+	if (info->interval)
+		info->interval--;
+	r8a66597_write(r8a66597, info->interval, PIPEPERI);
+
+	return 0;
+}
+
+static void pipe_buffer_release(struct r8a66597 *r8a66597,
+				struct r8a66597_pipe_info *info)
+{
+	if (info->pipe == 0)
+		return;
+
+	if (is_bulk_pipe(info->pipe))
+		r8a66597->bulk--;
+	else if (is_interrupt_pipe(info->pipe))
+		r8a66597->interrupt--;
+	else if (is_isoc_pipe(info->pipe)) {
+		r8a66597->isochronous--;
+		if (info->type == R8A66597_BULK)
+			r8a66597->bulk--;
+	} else
+		printk(KERN_ERR "ep_release: unexpect pipenum (%d)\n",
+				info->pipe);
+}
+
+static void pipe_initialize(struct r8a66597_ep *ep)
+{
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+
+	r8a66597_mdfy(r8a66597, 0, CURPIPE, ep->fifosel);
+
+	r8a66597_write(r8a66597, ACLRM, ep->pipectr);
+	r8a66597_write(r8a66597, 0, ep->pipectr);
+	r8a66597_write(r8a66597, SQCLR, ep->pipectr);
+	if (ep->use_dma) {
+		r8a66597_mdfy(r8a66597, ep->pipenum, CURPIPE, ep->fifosel);
+
+		ndelay(450);
+
+		r8a66597_bset(r8a66597, mbw_value(r8a66597), ep->fifosel);
+	}
+}
+
+static void r8a66597_ep_setting(struct r8a66597 *r8a66597,
+				struct r8a66597_ep *ep,
+				const struct usb_endpoint_descriptor *desc,
+				u16 pipenum, int dma)
+{
+	ep->use_dma = 0;
+	ep->fifoaddr = CFIFO;
+	ep->fifosel = CFIFOSEL;
+	ep->fifoctr = CFIFOCTR;
+	ep->fifotrn = 0;
+
+	ep->pipectr = get_pipectr_addr(pipenum);
+	ep->pipenum = pipenum;
+	ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	r8a66597->pipenum2ep[pipenum] = ep;
+	r8a66597->epaddr2ep[desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK]
+		= ep;
+	INIT_LIST_HEAD(&ep->queue);
+}
+
+static void r8a66597_ep_release(struct r8a66597_ep *ep)
+{
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+	u16 pipenum = ep->pipenum;
+
+	if (pipenum == 0)
+		return;
+
+	if (ep->use_dma)
+		r8a66597->num_dma--;
+	ep->pipenum = 0;
+	ep->busy = 0;
+	ep->use_dma = 0;
+}
+
+static int alloc_pipe_config(struct r8a66597_ep *ep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+	struct r8a66597_pipe_info info;
+	int dma = 0;
+	unsigned char *counter;
+	int ret;
+
+	ep->desc = desc;
+
+	if (ep->pipenum)	/* already allocated pipe  */
+		return 0;
+
+	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+	case USB_ENDPOINT_XFER_BULK:
+		if (r8a66597->bulk >= R8A66597_MAX_NUM_BULK) {
+			if (r8a66597->isochronous >= R8A66597_MAX_NUM_ISOC) {
+				printk(KERN_ERR "bulk pipe is insufficient\n");
+				return -ENODEV;
+			} else {
+				info.pipe = R8A66597_BASE_PIPENUM_ISOC
+						+ r8a66597->isochronous;
+				counter = &r8a66597->isochronous;
+			}
+		} else {
+			info.pipe = R8A66597_BASE_PIPENUM_BULK + r8a66597->bulk;
+			counter = &r8a66597->bulk;
+		}
+		info.type = R8A66597_BULK;
+		dma = 1;
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		if (r8a66597->interrupt >= R8A66597_MAX_NUM_INT) {
+			printk(KERN_ERR "interrupt pipe is insufficient\n");
+			return -ENODEV;
+		}
+		info.pipe = R8A66597_BASE_PIPENUM_INT + r8a66597->interrupt;
+		info.type = R8A66597_INT;
+		counter = &r8a66597->interrupt;
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		if (r8a66597->isochronous >= R8A66597_MAX_NUM_ISOC) {
+			printk(KERN_ERR "isochronous pipe is insufficient\n");
+			return -ENODEV;
+		}
+		info.pipe = R8A66597_BASE_PIPENUM_ISOC + r8a66597->isochronous;
+		info.type = R8A66597_ISO;
+		counter = &r8a66597->isochronous;
+		break;
+	default:
+		printk(KERN_ERR "unexpect xfer type\n");
+		return -EINVAL;
+	}
+	ep->type = info.type;
+
+	info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+	info.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	info.interval = desc->bInterval;
+	if (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+		info.dir_in = 1;
+	else
+		info.dir_in = 0;
+
+	ret = pipe_buffer_setting(r8a66597, &info);
+	if (ret < 0) {
+		printk(KERN_ERR "pipe_buffer_setting fail\n");
+		return ret;
+	}
+
+	(*counter)++;
+	if ((counter == &r8a66597->isochronous) && info.type == R8A66597_BULK)
+		r8a66597->bulk++;
+
+	r8a66597_ep_setting(r8a66597, ep, desc, info.pipe, dma);
+	pipe_initialize(ep);
+
+	return 0;
+}
+
+static int free_pipe_config(struct r8a66597_ep *ep)
+{
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+	struct r8a66597_pipe_info info;
+
+	info.pipe = ep->pipenum;
+	info.type = ep->type;
+	pipe_buffer_release(r8a66597, &info);
+	r8a66597_ep_release(ep);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static void pipe_irq_enable(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	enable_irq_ready(r8a66597, pipenum);
+	enable_irq_nrdy(r8a66597, pipenum);
+}
+
+static void pipe_irq_disable(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	disable_irq_ready(r8a66597, pipenum);
+	disable_irq_nrdy(r8a66597, pipenum);
+}
+
+/* if complete is true, gadget driver complete function is not call */
+static void control_end(struct r8a66597 *r8a66597, unsigned ccpl)
+{
+	r8a66597->ep[0].internal_ccpl = ccpl;
+	pipe_start(r8a66597, 0);
+	r8a66597_bset(r8a66597, CCPL, DCPCTR);
+}
+
+static void start_ep0_write(struct r8a66597_ep *ep,
+				struct r8a66597_request *req)
+{
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+
+	pipe_change(r8a66597, ep->pipenum);
+	r8a66597_mdfy(r8a66597, ISEL, (ISEL | CURPIPE), CFIFOSEL);
+	r8a66597_write(r8a66597, BCLR, ep->fifoctr);
+	if (req->req.length == 0) {
+		r8a66597_bset(r8a66597, BVAL, ep->fifoctr);
+		pipe_start(r8a66597, 0);
+		transfer_complete(ep, req, 0);
+	} else {
+		r8a66597_write(r8a66597, ~BEMP0, BEMPSTS);
+		irq_ep0_write(ep, req);
+	}
+}
+
+static void start_packet_write(struct r8a66597_ep *ep,
+				struct r8a66597_request *req)
+{
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+	u16 tmp;
+
+	pipe_change(r8a66597, ep->pipenum);
+	disable_irq_empty(r8a66597, ep->pipenum);
+	pipe_start(r8a66597, ep->pipenum);
+
+	tmp = r8a66597_read(r8a66597, ep->fifoctr);
+	if (unlikely((tmp & FRDY) == 0))
+		pipe_irq_enable(r8a66597, ep->pipenum);
+	else
+		irq_packet_write(ep, req);
+}
+
+static void start_packet_read(struct r8a66597_ep *ep,
+				struct r8a66597_request *req)
+{
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+	u16 pipenum = ep->pipenum;
+
+	if (ep->pipenum == 0) {
+		r8a66597_mdfy(r8a66597, 0, (ISEL | CURPIPE), CFIFOSEL);
+		r8a66597_write(r8a66597, BCLR, ep->fifoctr);
+		pipe_start(r8a66597, pipenum);
+		pipe_irq_enable(r8a66597, pipenum);
+	} else {
+		if (ep->use_dma) {
+			r8a66597_bset(r8a66597, TRCLR, ep->fifosel);
+			pipe_change(r8a66597, pipenum);
+			r8a66597_bset(r8a66597, TRENB, ep->fifosel);
+			r8a66597_write(r8a66597,
+				(req->req.length + ep->ep.maxpacket - 1)
+					/ ep->ep.maxpacket,
+				ep->fifotrn);
+		}
+		pipe_start(r8a66597, pipenum);	/* trigger once */
+		pipe_irq_enable(r8a66597, pipenum);
+	}
+}
+
+static void start_packet(struct r8a66597_ep *ep, struct r8a66597_request *req)
+{
+	if (ep->desc->bEndpointAddress & USB_DIR_IN)
+		start_packet_write(ep, req);
+	else
+		start_packet_read(ep, req);
+}
+
+static void start_ep0(struct r8a66597_ep *ep, struct r8a66597_request *req)
+{
+	u16 ctsq;
+
+	ctsq = r8a66597_read(ep->r8a66597, INTSTS0) & CTSQ;
+
+	switch (ctsq) {
+	case CS_RDDS:
+		start_ep0_write(ep, req);
+		break;
+	case CS_WRDS:
+		start_packet_read(ep, req);
+		break;
+
+	case CS_WRND:
+		control_end(ep->r8a66597, 0);
+		break;
+	default:
+		printk(KERN_ERR "start_ep0: unexpect ctsq(%x)\n", ctsq);
+		break;
+	}
+}
+
+static void init_controller(struct r8a66597 *r8a66597)
+{
+	u16 vif = r8a66597->pdata->vif ? LDRV : 0;
+	u16 irq_sense = r8a66597->irq_sense_low ? INTL : 0;
+	u16 endian = r8a66597->pdata->endian ? BIGEND : 0;
+
+	if (r8a66597->pdata->on_chip) {
+		r8a66597_bset(r8a66597, 0x04, SYSCFG1);
+		r8a66597_bset(r8a66597, HSE, SYSCFG0);
+
+		r8a66597_bclr(r8a66597, USBE, SYSCFG0);
+		r8a66597_bclr(r8a66597, DPRPU, SYSCFG0);
+		r8a66597_bset(r8a66597, USBE, SYSCFG0);
+
+		r8a66597_bset(r8a66597, SCKE, SYSCFG0);
+
+		r8a66597_bset(r8a66597, irq_sense, INTENB1);
+		r8a66597_write(r8a66597, BURST | CPU_ADR_RD_WR,
+				DMA0CFG);
+	} else {
+		r8a66597_bset(r8a66597, vif | endian, PINCFG);
+		r8a66597_bset(r8a66597, HSE, SYSCFG0);		/* High spd */
+		r8a66597_mdfy(r8a66597, get_xtal_from_pdata(r8a66597->pdata),
+				XTAL, SYSCFG0);
+
+		r8a66597_bclr(r8a66597, USBE, SYSCFG0);
+		r8a66597_bclr(r8a66597, DPRPU, SYSCFG0);
+		r8a66597_bset(r8a66597, USBE, SYSCFG0);
+
+		r8a66597_bset(r8a66597, XCKE, SYSCFG0);
+
+		msleep(3);
+
+		r8a66597_bset(r8a66597, PLLC, SYSCFG0);
+
+		msleep(1);
+
+		r8a66597_bset(r8a66597, SCKE, SYSCFG0);
+
+		r8a66597_bset(r8a66597, irq_sense, INTENB1);
+		r8a66597_write(r8a66597, BURST | CPU_ADR_RD_WR,
+			       DMA0CFG);
+	}
+}
+
+static void disable_controller(struct r8a66597 *r8a66597)
+{
+	if (r8a66597->pdata->on_chip) {
+		r8a66597_bset(r8a66597, SCKE, SYSCFG0);
+
+		/* disable interrupts */
+		r8a66597_write(r8a66597, 0, INTENB0);
+		r8a66597_write(r8a66597, 0, INTENB1);
+		r8a66597_write(r8a66597, 0, BRDYENB);
+		r8a66597_write(r8a66597, 0, BEMPENB);
+		r8a66597_write(r8a66597, 0, NRDYENB);
+
+		/* clear status */
+		r8a66597_write(r8a66597, 0, BRDYSTS);
+		r8a66597_write(r8a66597, 0, NRDYSTS);
+		r8a66597_write(r8a66597, 0, BEMPSTS);
+
+		r8a66597_bclr(r8a66597, USBE, SYSCFG0);
+		r8a66597_bclr(r8a66597, SCKE, SYSCFG0);
+
+	} else {
+		r8a66597_bclr(r8a66597, SCKE, SYSCFG0);
+		udelay(1);
+		r8a66597_bclr(r8a66597, PLLC, SYSCFG0);
+		udelay(1);
+		udelay(1);
+		r8a66597_bclr(r8a66597, XCKE, SYSCFG0);
+	}
+}
+
+static void r8a66597_start_xclock(struct r8a66597 *r8a66597)
+{
+	u16 tmp;
+
+	if (!r8a66597->pdata->on_chip) {
+		tmp = r8a66597_read(r8a66597, SYSCFG0);
+		if (!(tmp & XCKE))
+			r8a66597_bset(r8a66597, XCKE, SYSCFG0);
+	}
+}
+
+static struct r8a66597_request *get_request_from_ep(struct r8a66597_ep *ep)
+{
+	return list_entry(ep->queue.next, struct r8a66597_request, queue);
+}
+
+/*-------------------------------------------------------------------------*/
+static void transfer_complete(struct r8a66597_ep *ep,
+		struct r8a66597_request *req, int status)
+__releases(r8a66597->lock)
+__acquires(r8a66597->lock)
+{
+	int restart = 0;
+
+	if (unlikely(ep->pipenum == 0)) {
+		if (ep->internal_ccpl) {
+			ep->internal_ccpl = 0;
+			return;
+		}
+	}
+
+	list_del_init(&req->queue);
+	if (ep->r8a66597->gadget.speed == USB_SPEED_UNKNOWN)
+		req->req.status = -ESHUTDOWN;
+	else
+		req->req.status = status;
+
+	if (!list_empty(&ep->queue))
+		restart = 1;
+
+	spin_unlock(&ep->r8a66597->lock);
+	req->req.complete(&ep->ep, &req->req);
+	spin_lock(&ep->r8a66597->lock);
+
+	if (restart) {
+		req = get_request_from_ep(ep);
+		if (ep->desc)
+			start_packet(ep, req);
+	}
+}
+
+static void irq_ep0_write(struct r8a66597_ep *ep, struct r8a66597_request *req)
+{
+	int i;
+	u16 tmp;
+	unsigned bufsize;
+	size_t size;
+	void *buf;
+	u16 pipenum = ep->pipenum;
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+
+	pipe_change(r8a66597, pipenum);
+	r8a66597_bset(r8a66597, ISEL, ep->fifosel);
+
+	i = 0;
+	do {
+		tmp = r8a66597_read(r8a66597, ep->fifoctr);
+		if (i++ > 100000) {
+			printk(KERN_ERR "pipe0 is busy. maybe cpu i/o bus"
+				"conflict. please power off this controller.");
+			return;
+		}
+		ndelay(1);
+	} while ((tmp & FRDY) == 0);
+
+	/* prepare parameters */
+	bufsize = get_buffer_size(r8a66597, pipenum);
+	buf = req->req.buf + req->req.actual;
+	size = min(bufsize, req->req.length - req->req.actual);
+
+	/* write fifo */
+	if (req->req.buf) {
+		if (size > 0)
+			r8a66597_write_fifo(r8a66597, ep->fifoaddr, buf, size);
+		if ((size == 0) || ((size % ep->ep.maxpacket) != 0))
+			r8a66597_bset(r8a66597, BVAL, ep->fifoctr);
+	}
+
+	/* update parameters */
+	req->req.actual += size;
+
+	/* check transfer finish */
+	if ((!req->req.zero && (req->req.actual == req->req.length))
+			|| (size % ep->ep.maxpacket)
+			|| (size == 0)) {
+		disable_irq_ready(r8a66597, pipenum);
+		disable_irq_empty(r8a66597, pipenum);
+	} else {
+		disable_irq_ready(r8a66597, pipenum);
+		enable_irq_empty(r8a66597, pipenum);
+	}
+	pipe_start(r8a66597, pipenum);
+}
+
+static void irq_packet_write(struct r8a66597_ep *ep,
+				struct r8a66597_request *req)
+{
+	u16 tmp;
+	unsigned bufsize;
+	size_t size;
+	void *buf;
+	u16 pipenum = ep->pipenum;
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+
+	pipe_change(r8a66597, pipenum);
+	tmp = r8a66597_read(r8a66597, ep->fifoctr);
+	if (unlikely((tmp & FRDY) == 0)) {
+		pipe_stop(r8a66597, pipenum);
+		pipe_irq_disable(r8a66597, pipenum);
+		printk(KERN_ERR "write fifo not ready. pipnum=%d\n", pipenum);
+		return;
+	}
+
+	/* prepare parameters */
+	bufsize = get_buffer_size(r8a66597, pipenum);
+	buf = req->req.buf + req->req.actual;
+	size = min(bufsize, req->req.length - req->req.actual);
+
+	/* write fifo */
+	if (req->req.buf) {
+		r8a66597_write_fifo(r8a66597, ep->fifoaddr, buf, size);
+		if ((size == 0)
+				|| ((size % ep->ep.maxpacket) != 0)
+				|| ((bufsize != ep->ep.maxpacket)
+					&& (bufsize > size)))
+			r8a66597_bset(r8a66597, BVAL, ep->fifoctr);
+	}
+
+	/* update parameters */
+	req->req.actual += size;
+	/* check transfer finish */
+	if ((!req->req.zero && (req->req.actual == req->req.length))
+			|| (size % ep->ep.maxpacket)
+			|| (size == 0)) {
+		disable_irq_ready(r8a66597, pipenum);
+		enable_irq_empty(r8a66597, pipenum);
+	} else {
+		disable_irq_empty(r8a66597, pipenum);
+		pipe_irq_enable(r8a66597, pipenum);
+	}
+}
+
+static void irq_packet_read(struct r8a66597_ep *ep,
+				struct r8a66597_request *req)
+{
+	u16 tmp;
+	int rcv_len, bufsize, req_len;
+	int size;
+	void *buf;
+	u16 pipenum = ep->pipenum;
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+	int finish = 0;
+
+	pipe_change(r8a66597, pipenum);
+	tmp = r8a66597_read(r8a66597, ep->fifoctr);
+	if (unlikely((tmp & FRDY) == 0)) {
+		req->req.status = -EPIPE;
+		pipe_stop(r8a66597, pipenum);
+		pipe_irq_disable(r8a66597, pipenum);
+		printk(KERN_ERR "read fifo not ready");
+		return;
+	}
+
+	/* prepare parameters */
+	rcv_len = tmp & DTLN;
+	bufsize = get_buffer_size(r8a66597, pipenum);
+
+	buf = req->req.buf + req->req.actual;
+	req_len = req->req.length - req->req.actual;
+	if (rcv_len < bufsize)
+		size = min(rcv_len, req_len);
+	else
+		size = min(bufsize, req_len);
+
+	/* update parameters */
+	req->req.actual += size;
+
+	/* check transfer finish */
+	if ((!req->req.zero && (req->req.actual == req->req.length))
+			|| (size % ep->ep.maxpacket)
+			|| (size == 0)) {
+		pipe_stop(r8a66597, pipenum);
+		pipe_irq_disable(r8a66597, pipenum);
+		finish = 1;
+	}
+
+	/* read fifo */
+	if (req->req.buf) {
+		if (size == 0)
+			r8a66597_write(r8a66597, BCLR, ep->fifoctr);
+		else
+			r8a66597_read_fifo(r8a66597, ep->fifoaddr, buf, size);
+
+	}
+
+	if ((ep->pipenum != 0) && finish)
+		transfer_complete(ep, req, 0);
+}
+
+static void irq_pipe_ready(struct r8a66597 *r8a66597, u16 status, u16 enb)
+{
+	u16 check;
+	u16 pipenum;
+	struct r8a66597_ep *ep;
+	struct r8a66597_request *req;
+
+	if ((status & BRDY0) && (enb & BRDY0)) {
+		r8a66597_write(r8a66597, ~BRDY0, BRDYSTS);
+		r8a66597_mdfy(r8a66597, 0, CURPIPE, CFIFOSEL);
+
+		ep = &r8a66597->ep[0];
+		req = get_request_from_ep(ep);
+		irq_packet_read(ep, req);
+	} else {
+		for (pipenum = 1; pipenum < R8A66597_MAX_NUM_PIPE; pipenum++) {
+			check = 1 << pipenum;
+			if ((status & check) && (enb & check)) {
+				r8a66597_write(r8a66597, ~check, BRDYSTS);
+				ep = r8a66597->pipenum2ep[pipenum];
+				req = get_request_from_ep(ep);
+				if (ep->desc->bEndpointAddress & USB_DIR_IN)
+					irq_packet_write(ep, req);
+				else
+					irq_packet_read(ep, req);
+			}
+		}
+	}
+}
+
+static void irq_pipe_empty(struct r8a66597 *r8a66597, u16 status, u16 enb)
+{
+	u16 tmp;
+	u16 check;
+	u16 pipenum;
+	struct r8a66597_ep *ep;
+	struct r8a66597_request *req;
+
+	if ((status & BEMP0) && (enb & BEMP0)) {
+		r8a66597_write(r8a66597, ~BEMP0, BEMPSTS);
+
+		ep = &r8a66597->ep[0];
+		req = get_request_from_ep(ep);
+		irq_ep0_write(ep, req);
+	} else {
+		for (pipenum = 1; pipenum < R8A66597_MAX_NUM_PIPE; pipenum++) {
+			check = 1 << pipenum;
+			if ((status & check) && (enb & check)) {
+				r8a66597_write(r8a66597, ~check, BEMPSTS);
+				tmp = control_reg_get(r8a66597, pipenum);
+				if ((tmp & INBUFM) == 0) {
+					disable_irq_empty(r8a66597, pipenum);
+					pipe_irq_disable(r8a66597, pipenum);
+					pipe_stop(r8a66597, pipenum);
+					ep = r8a66597->pipenum2ep[pipenum];
+					req = get_request_from_ep(ep);
+					if (!list_empty(&ep->queue))
+						transfer_complete(ep, req, 0);
+				}
+			}
+		}
+	}
+}
+
+static void get_status(struct r8a66597 *r8a66597, struct usb_ctrlrequest *ctrl)
+__releases(r8a66597->lock)
+__acquires(r8a66597->lock)
+{
+	struct r8a66597_ep *ep;
+	u16 pid;
+	u16 status = 0;
+	u16 w_index = le16_to_cpu(ctrl->wIndex);
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		status = 1 << USB_DEVICE_SELF_POWERED;
+		break;
+	case USB_RECIP_INTERFACE:
+		status = 0;
+		break;
+	case USB_RECIP_ENDPOINT:
+		ep = r8a66597->epaddr2ep[w_index & USB_ENDPOINT_NUMBER_MASK];
+		pid = control_reg_get_pid(r8a66597, ep->pipenum);
+		if (pid == PID_STALL)
+			status = 1 << USB_ENDPOINT_HALT;
+		else
+			status = 0;
+		break;
+	default:
+		pipe_stall(r8a66597, 0);
+		return;		/* exit */
+	}
+
+	r8a66597->ep0_data = cpu_to_le16(status);
+	r8a66597->ep0_req->buf = &r8a66597->ep0_data;
+	r8a66597->ep0_req->length = 2;
+	/* AV: what happens if we get called again before that gets through? */
+	spin_unlock(&r8a66597->lock);
+	r8a66597_queue(r8a66597->gadget.ep0, r8a66597->ep0_req, GFP_KERNEL);
+	spin_lock(&r8a66597->lock);
+}
+
+static void clear_feature(struct r8a66597 *r8a66597,
+				struct usb_ctrlrequest *ctrl)
+{
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		control_end(r8a66597, 1);
+		break;
+	case USB_RECIP_INTERFACE:
+		control_end(r8a66597, 1);
+		break;
+	case USB_RECIP_ENDPOINT: {
+		struct r8a66597_ep *ep;
+		struct r8a66597_request *req;
+		u16 w_index = le16_to_cpu(ctrl->wIndex);
+
+		ep = r8a66597->epaddr2ep[w_index & USB_ENDPOINT_NUMBER_MASK];
+		if (!ep->wedge) {
+			pipe_stop(r8a66597, ep->pipenum);
+			control_reg_sqclr(r8a66597, ep->pipenum);
+			spin_unlock(&r8a66597->lock);
+			usb_ep_clear_halt(&ep->ep);
+			spin_lock(&r8a66597->lock);
+		}
+
+		control_end(r8a66597, 1);
+
+		req = get_request_from_ep(ep);
+		if (ep->busy) {
+			ep->busy = 0;
+			if (list_empty(&ep->queue))
+				break;
+			start_packet(ep, req);
+		} else if (!list_empty(&ep->queue))
+			pipe_start(r8a66597, ep->pipenum);
+		}
+		break;
+	default:
+		pipe_stall(r8a66597, 0);
+		break;
+	}
+}
+
+static void set_feature(struct r8a66597 *r8a66597, struct usb_ctrlrequest *ctrl)
+{
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		control_end(r8a66597, 1);
+		break;
+	case USB_RECIP_INTERFACE:
+		control_end(r8a66597, 1);
+		break;
+	case USB_RECIP_ENDPOINT: {
+		struct r8a66597_ep *ep;
+		u16 w_index = le16_to_cpu(ctrl->wIndex);
+
+		ep = r8a66597->epaddr2ep[w_index & USB_ENDPOINT_NUMBER_MASK];
+		pipe_stall(r8a66597, ep->pipenum);
+
+		control_end(r8a66597, 1);
+		}
+		break;
+	default:
+		pipe_stall(r8a66597, 0);
+		break;
+	}
+}
+
+/* if return value is true, call class driver's setup() */
+static int setup_packet(struct r8a66597 *r8a66597, struct usb_ctrlrequest *ctrl)
+{
+	u16 *p = (u16 *)ctrl;
+	unsigned long offset = USBREQ;
+	int i, ret = 0;
+
+	/* read fifo */
+	r8a66597_write(r8a66597, ~VALID, INTSTS0);
+
+	for (i = 0; i < 4; i++)
+		p[i] = r8a66597_read(r8a66597, offset + i*2);
+
+	/* check request */
+	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+		switch (ctrl->bRequest) {
+		case USB_REQ_GET_STATUS:
+			get_status(r8a66597, ctrl);
+			break;
+		case USB_REQ_CLEAR_FEATURE:
+			clear_feature(r8a66597, ctrl);
+			break;
+		case USB_REQ_SET_FEATURE:
+			set_feature(r8a66597, ctrl);
+			break;
+		default:
+			ret = 1;
+			break;
+		}
+	} else
+		ret = 1;
+	return ret;
+}
+
+static void r8a66597_update_usb_speed(struct r8a66597 *r8a66597)
+{
+	u16 speed = get_usb_speed(r8a66597);
+
+	switch (speed) {
+	case HSMODE:
+		r8a66597->gadget.speed = USB_SPEED_HIGH;
+		break;
+	case FSMODE:
+		r8a66597->gadget.speed = USB_SPEED_FULL;
+		break;
+	default:
+		r8a66597->gadget.speed = USB_SPEED_UNKNOWN;
+		printk(KERN_ERR "USB speed unknown\n");
+	}
+}
+
+static void irq_device_state(struct r8a66597 *r8a66597)
+{
+	u16 dvsq;
+
+	dvsq = r8a66597_read(r8a66597, INTSTS0) & DVSQ;
+	r8a66597_write(r8a66597, ~DVST, INTSTS0);
+
+	if (dvsq == DS_DFLT) {
+		/* bus reset */
+		r8a66597->driver->disconnect(&r8a66597->gadget);
+		r8a66597_update_usb_speed(r8a66597);
+	}
+	if (r8a66597->old_dvsq == DS_CNFG && dvsq != DS_CNFG)
+		r8a66597_update_usb_speed(r8a66597);
+	if ((dvsq == DS_CNFG || dvsq == DS_ADDS)
+			&& r8a66597->gadget.speed == USB_SPEED_UNKNOWN)
+		r8a66597_update_usb_speed(r8a66597);
+
+	r8a66597->old_dvsq = dvsq;
+}
+
+static void irq_control_stage(struct r8a66597 *r8a66597)
+__releases(r8a66597->lock)
+__acquires(r8a66597->lock)
+{
+	struct usb_ctrlrequest ctrl;
+	u16 ctsq;
+
+	ctsq = r8a66597_read(r8a66597, INTSTS0) & CTSQ;
+	r8a66597_write(r8a66597, ~CTRT, INTSTS0);
+
+	switch (ctsq) {
+	case CS_IDST: {
+		struct r8a66597_ep *ep;
+		struct r8a66597_request *req;
+		ep = &r8a66597->ep[0];
+		req = get_request_from_ep(ep);
+		transfer_complete(ep, req, 0);
+		}
+		break;
+
+	case CS_RDDS:
+	case CS_WRDS:
+	case CS_WRND:
+		if (setup_packet(r8a66597, &ctrl)) {
+			spin_unlock(&r8a66597->lock);
+			if (r8a66597->driver->setup(&r8a66597->gadget, &ctrl)
+				< 0)
+				pipe_stall(r8a66597, 0);
+			spin_lock(&r8a66597->lock);
+		}
+		break;
+	case CS_RDSS:
+	case CS_WRSS:
+		control_end(r8a66597, 0);
+		break;
+	default:
+		printk(KERN_ERR "ctrl_stage: unexpect ctsq(%x)\n", ctsq);
+		break;
+	}
+}
+
+static irqreturn_t r8a66597_irq(int irq, void *_r8a66597)
+{
+	struct r8a66597 *r8a66597 = _r8a66597;
+	u16 intsts0;
+	u16 intenb0;
+	u16 brdysts, nrdysts, bempsts;
+	u16 brdyenb, nrdyenb, bempenb;
+	u16 savepipe;
+	u16 mask0;
+
+	spin_lock(&r8a66597->lock);
+
+	intsts0 = r8a66597_read(r8a66597, INTSTS0);
+	intenb0 = r8a66597_read(r8a66597, INTENB0);
+
+	savepipe = r8a66597_read(r8a66597, CFIFOSEL);
+
+	mask0 = intsts0 & intenb0;
+	if (mask0) {
+		brdysts = r8a66597_read(r8a66597, BRDYSTS);
+		nrdysts = r8a66597_read(r8a66597, NRDYSTS);
+		bempsts = r8a66597_read(r8a66597, BEMPSTS);
+		brdyenb = r8a66597_read(r8a66597, BRDYENB);
+		nrdyenb = r8a66597_read(r8a66597, NRDYENB);
+		bempenb = r8a66597_read(r8a66597, BEMPENB);
+
+		if (mask0 & VBINT) {
+			r8a66597_write(r8a66597,  0xffff & ~VBINT,
+					INTSTS0);
+			r8a66597_start_xclock(r8a66597);
+
+			/* start vbus sampling */
+			r8a66597->old_vbus = r8a66597_read(r8a66597, INTSTS0)
+					& VBSTS;
+			r8a66597->scount = R8A66597_MAX_SAMPLING;
+
+			mod_timer(&r8a66597->timer,
+					jiffies + msecs_to_jiffies(50));
+		}
+		if (intsts0 & DVSQ)
+			irq_device_state(r8a66597);
+
+		if ((intsts0 & BRDY) && (intenb0 & BRDYE)
+				&& (brdysts & brdyenb))
+			irq_pipe_ready(r8a66597, brdysts, brdyenb);
+		if ((intsts0 & BEMP) && (intenb0 & BEMPE)
+				&& (bempsts & bempenb))
+			irq_pipe_empty(r8a66597, bempsts, bempenb);
+
+		if (intsts0 & CTRT)
+			irq_control_stage(r8a66597);
+	}
+
+	r8a66597_write(r8a66597, savepipe, CFIFOSEL);
+
+	spin_unlock(&r8a66597->lock);
+	return IRQ_HANDLED;
+}
+
+static void r8a66597_timer(unsigned long _r8a66597)
+{
+	struct r8a66597 *r8a66597 = (struct r8a66597 *)_r8a66597;
+	unsigned long flags;
+	u16 tmp;
+
+	spin_lock_irqsave(&r8a66597->lock, flags);
+	tmp = r8a66597_read(r8a66597, SYSCFG0);
+	if (r8a66597->scount > 0) {
+		tmp = r8a66597_read(r8a66597, INTSTS0) & VBSTS;
+		if (tmp == r8a66597->old_vbus) {
+			r8a66597->scount--;
+			if (r8a66597->scount == 0) {
+				if (tmp == VBSTS)
+					r8a66597_usb_connect(r8a66597);
+				else
+					r8a66597_usb_disconnect(r8a66597);
+			} else {
+				mod_timer(&r8a66597->timer,
+					jiffies + msecs_to_jiffies(50));
+			}
+		} else {
+			r8a66597->scount = R8A66597_MAX_SAMPLING;
+			r8a66597->old_vbus = tmp;
+			mod_timer(&r8a66597->timer,
+					jiffies + msecs_to_jiffies(50));
+		}
+	}
+	spin_unlock_irqrestore(&r8a66597->lock, flags);
+}
+
+/*-------------------------------------------------------------------------*/
+static int r8a66597_enable(struct usb_ep *_ep,
+			 const struct usb_endpoint_descriptor *desc)
+{
+	struct r8a66597_ep *ep;
+
+	ep = container_of(_ep, struct r8a66597_ep, ep);
+	return alloc_pipe_config(ep, desc);
+}
+
+static int r8a66597_disable(struct usb_ep *_ep)
+{
+	struct r8a66597_ep *ep;
+	struct r8a66597_request *req;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct r8a66597_ep, ep);
+	BUG_ON(!ep);
+
+	while (!list_empty(&ep->queue)) {
+		req = get_request_from_ep(ep);
+		spin_lock_irqsave(&ep->r8a66597->lock, flags);
+		transfer_complete(ep, req, -ECONNRESET);
+		spin_unlock_irqrestore(&ep->r8a66597->lock, flags);
+	}
+
+	pipe_irq_disable(ep->r8a66597, ep->pipenum);
+	return free_pipe_config(ep);
+}
+
+static struct usb_request *r8a66597_alloc_request(struct usb_ep *_ep,
+						gfp_t gfp_flags)
+{
+	struct r8a66597_request *req;
+
+	req = kzalloc(sizeof(struct r8a66597_request), gfp_flags);
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+static void r8a66597_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct r8a66597_request *req;
+
+	req = container_of(_req, struct r8a66597_request, req);
+	kfree(req);
+}
+
+static int r8a66597_queue(struct usb_ep *_ep, struct usb_request *_req,
+			gfp_t gfp_flags)
+{
+	struct r8a66597_ep *ep;
+	struct r8a66597_request *req;
+	unsigned long flags;
+	int request = 0;
+
+	ep = container_of(_ep, struct r8a66597_ep, ep);
+	req = container_of(_req, struct r8a66597_request, req);
+
+	if (ep->r8a66597->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	spin_lock_irqsave(&ep->r8a66597->lock, flags);
+
+	if (list_empty(&ep->queue))
+		request = 1;
+
+	list_add_tail(&req->queue, &ep->queue);
+	req->req.actual = 0;
+	req->req.status = -EINPROGRESS;
+
+	if (ep->desc == NULL)	/* control */
+		start_ep0(ep, req);
+	else {
+		if (request && !ep->busy)
+			start_packet(ep, req);
+	}
+
+	spin_unlock_irqrestore(&ep->r8a66597->lock, flags);
+
+	return 0;
+}
+
+static int r8a66597_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct r8a66597_ep *ep;
+	struct r8a66597_request *req;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct r8a66597_ep, ep);
+	req = container_of(_req, struct r8a66597_request, req);
+
+	spin_lock_irqsave(&ep->r8a66597->lock, flags);
+	if (!list_empty(&ep->queue))
+		transfer_complete(ep, req, -ECONNRESET);
+	spin_unlock_irqrestore(&ep->r8a66597->lock, flags);
+
+	return 0;
+}
+
+static int r8a66597_set_halt(struct usb_ep *_ep, int value)
+{
+	struct r8a66597_ep *ep;
+	struct r8a66597_request *req;
+	unsigned long flags;
+	int ret = 0;
+
+	ep = container_of(_ep, struct r8a66597_ep, ep);
+	req = get_request_from_ep(ep);
+
+	spin_lock_irqsave(&ep->r8a66597->lock, flags);
+	if (!list_empty(&ep->queue)) {
+		ret = -EAGAIN;
+		goto out;
+	}
+	if (value) {
+		ep->busy = 1;
+		pipe_stall(ep->r8a66597, ep->pipenum);
+	} else {
+		ep->busy = 0;
+		ep->wedge = 0;
+		pipe_stop(ep->r8a66597, ep->pipenum);
+	}
+
+out:
+	spin_unlock_irqrestore(&ep->r8a66597->lock, flags);
+	return ret;
+}
+
+static int r8a66597_set_wedge(struct usb_ep *_ep)
+{
+	struct r8a66597_ep *ep;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct r8a66597_ep, ep);
+
+	if (!ep || !ep->desc)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ep->r8a66597->lock, flags);
+	ep->wedge = 1;
+	spin_unlock_irqrestore(&ep->r8a66597->lock, flags);
+
+	return usb_ep_set_halt(_ep);
+}
+
+static void r8a66597_fifo_flush(struct usb_ep *_ep)
+{
+	struct r8a66597_ep *ep;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct r8a66597_ep, ep);
+	spin_lock_irqsave(&ep->r8a66597->lock, flags);
+	if (list_empty(&ep->queue) && !ep->busy) {
+		pipe_stop(ep->r8a66597, ep->pipenum);
+		r8a66597_bclr(ep->r8a66597, BCLR, ep->fifoctr);
+	}
+	spin_unlock_irqrestore(&ep->r8a66597->lock, flags);
+}
+
+static struct usb_ep_ops r8a66597_ep_ops = {
+	.enable		= r8a66597_enable,
+	.disable	= r8a66597_disable,
+
+	.alloc_request	= r8a66597_alloc_request,
+	.free_request	= r8a66597_free_request,
+
+	.queue		= r8a66597_queue,
+	.dequeue	= r8a66597_dequeue,
+
+	.set_halt	= r8a66597_set_halt,
+	.set_wedge	= r8a66597_set_wedge,
+	.fifo_flush	= r8a66597_fifo_flush,
+};
+
+/*-------------------------------------------------------------------------*/
+static struct r8a66597 *the_controller;
+
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+	struct r8a66597 *r8a66597 = the_controller;
+	int retval;
+
+	if (!driver
+			|| driver->speed != USB_SPEED_HIGH
+			|| !driver->bind
+			|| !driver->setup)
+		return -EINVAL;
+	if (!r8a66597)
+		return -ENODEV;
+	if (r8a66597->driver)
+		return -EBUSY;
+
+	/* hook up the driver */
+	driver->driver.bus = NULL;
+	r8a66597->driver = driver;
+	r8a66597->gadget.dev.driver = &driver->driver;
+
+	retval = device_add(&r8a66597->gadget.dev);
+	if (retval) {
+		printk(KERN_ERR "device_add error (%d)\n", retval);
+		goto error;
+	}
+
+	retval = driver->bind(&r8a66597->gadget);
+	if (retval) {
+		printk(KERN_ERR "bind to driver error (%d)\n", retval);
+		device_del(&r8a66597->gadget.dev);
+		goto error;
+	}
+
+	r8a66597_bset(r8a66597, VBSE, INTENB0);
+	if (r8a66597_read(r8a66597, INTSTS0) & VBSTS) {
+		r8a66597_start_xclock(r8a66597);
+		/* start vbus sampling */
+		r8a66597->old_vbus = r8a66597_read(r8a66597,
+					 INTSTS0) & VBSTS;
+		r8a66597->scount = R8A66597_MAX_SAMPLING;
+		mod_timer(&r8a66597->timer, jiffies + msecs_to_jiffies(50));
+	}
+
+	return 0;
+
+error:
+	r8a66597->driver = NULL;
+	r8a66597->gadget.dev.driver = NULL;
+
+	return retval;
+}
+EXPORT_SYMBOL(usb_gadget_register_driver);
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+	struct r8a66597 *r8a66597 = the_controller;
+	unsigned long flags;
+
+	if (driver != r8a66597->driver || !driver->unbind)
+		return -EINVAL;
+
+	spin_lock_irqsave(&r8a66597->lock, flags);
+	if (r8a66597->gadget.speed != USB_SPEED_UNKNOWN)
+		r8a66597_usb_disconnect(r8a66597);
+	spin_unlock_irqrestore(&r8a66597->lock, flags);
+
+	r8a66597_bclr(r8a66597, VBSE, INTENB0);
+
+	driver->unbind(&r8a66597->gadget);
+
+	init_controller(r8a66597);
+	disable_controller(r8a66597);
+
+	device_del(&r8a66597->gadget.dev);
+	r8a66597->driver = NULL;
+	return 0;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+/*-------------------------------------------------------------------------*/
+static int r8a66597_get_frame(struct usb_gadget *_gadget)
+{
+	struct r8a66597 *r8a66597 = gadget_to_r8a66597(_gadget);
+	return r8a66597_read(r8a66597, FRMNUM) & 0x03FF;
+}
+
+static struct usb_gadget_ops r8a66597_gadget_ops = {
+	.get_frame		= r8a66597_get_frame,
+};
+
+static int __exit r8a66597_remove(struct platform_device *pdev)
+{
+	struct r8a66597		*r8a66597 = dev_get_drvdata(&pdev->dev);
+
+	del_timer_sync(&r8a66597->timer);
+	iounmap((void *)r8a66597->reg);
+	free_irq(platform_get_irq(pdev, 0), r8a66597);
+	r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req);
+#ifdef CONFIG_HAVE_CLK
+	if (r8a66597->pdata->on_chip) {
+		clk_disable(r8a66597->clk);
+		clk_put(r8a66597->clk);
+	}
+#endif
+	kfree(r8a66597);
+	return 0;
+}
+
+static void nop_completion(struct usb_ep *ep, struct usb_request *r)
+{
+}
+
+static int __init r8a66597_probe(struct platform_device *pdev)
+{
+#ifdef CONFIG_HAVE_CLK
+	char clk_name[8];
+#endif
+	struct resource *res, *ires;
+	int irq;
+	void __iomem *reg = NULL;
+	struct r8a66597 *r8a66597 = NULL;
+	int ret = 0;
+	int i;
+	unsigned long irq_trigger;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENODEV;
+		printk(KERN_ERR "platform_get_resource error.\n");
+		goto clean_up;
+	}
+
+	ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	irq = ires->start;
+	irq_trigger = ires->flags & IRQF_TRIGGER_MASK;
+
+	if (irq < 0) {
+		ret = -ENODEV;
+		printk(KERN_ERR "platform_get_irq error.\n");
+		goto clean_up;
+	}
+
+	reg = ioremap(res->start, resource_size(res));
+	if (reg == NULL) {
+		ret = -ENOMEM;
+		printk(KERN_ERR "ioremap error.\n");
+		goto clean_up;
+	}
+
+	/* initialize ucd */
+	r8a66597 = kzalloc(sizeof(struct r8a66597), GFP_KERNEL);
+	if (r8a66597 == NULL) {
+		printk(KERN_ERR "kzalloc error\n");
+		goto clean_up;
+	}
+
+	spin_lock_init(&r8a66597->lock);
+	dev_set_drvdata(&pdev->dev, r8a66597);
+	r8a66597->pdata = pdev->dev.platform_data;
+	r8a66597->irq_sense_low = irq_trigger == IRQF_TRIGGER_LOW;
+
+	r8a66597->gadget.ops = &r8a66597_gadget_ops;
+	device_initialize(&r8a66597->gadget.dev);
+	dev_set_name(&r8a66597->gadget.dev, "gadget");
+	r8a66597->gadget.is_dualspeed = 1;
+	r8a66597->gadget.dev.parent = &pdev->dev;
+	r8a66597->gadget.dev.dma_mask = pdev->dev.dma_mask;
+	r8a66597->gadget.dev.release = pdev->dev.release;
+	r8a66597->gadget.name = udc_name;
+
+	init_timer(&r8a66597->timer);
+	r8a66597->timer.function = r8a66597_timer;
+	r8a66597->timer.data = (unsigned long)r8a66597;
+	r8a66597->reg = (unsigned long)reg;
+
+#ifdef CONFIG_HAVE_CLK
+	if (r8a66597->pdata->on_chip) {
+		snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id);
+		r8a66597->clk = clk_get(&pdev->dev, clk_name);
+		if (IS_ERR(r8a66597->clk)) {
+			dev_err(&pdev->dev, "cannot get clock \"%s\"\n",
+				clk_name);
+			ret = PTR_ERR(r8a66597->clk);
+			goto clean_up;
+		}
+		clk_enable(r8a66597->clk);
+	}
+#endif
+
+	disable_controller(r8a66597); /* make sure controller is disabled */
+
+	ret = request_irq(irq, r8a66597_irq, IRQF_DISABLED | IRQF_SHARED,
+			udc_name, r8a66597);
+	if (ret < 0) {
+		printk(KERN_ERR "request_irq error (%d)\n", ret);
+		goto clean_up2;
+	}
+
+	INIT_LIST_HEAD(&r8a66597->gadget.ep_list);
+	r8a66597->gadget.ep0 = &r8a66597->ep[0].ep;
+	INIT_LIST_HEAD(&r8a66597->gadget.ep0->ep_list);
+	for (i = 0; i < R8A66597_MAX_NUM_PIPE; i++) {
+		struct r8a66597_ep *ep = &r8a66597->ep[i];
+
+		if (i != 0) {
+			INIT_LIST_HEAD(&r8a66597->ep[i].ep.ep_list);
+			list_add_tail(&r8a66597->ep[i].ep.ep_list,
+					&r8a66597->gadget.ep_list);
+		}
+		ep->r8a66597 = r8a66597;
+		INIT_LIST_HEAD(&ep->queue);
+		ep->ep.name = r8a66597_ep_name[i];
+		ep->ep.ops = &r8a66597_ep_ops;
+		ep->ep.maxpacket = 512;
+	}
+	r8a66597->ep[0].ep.maxpacket = 64;
+	r8a66597->ep[0].pipenum = 0;
+	r8a66597->ep[0].fifoaddr = CFIFO;
+	r8a66597->ep[0].fifosel = CFIFOSEL;
+	r8a66597->ep[0].fifoctr = CFIFOCTR;
+	r8a66597->ep[0].fifotrn = 0;
+	r8a66597->ep[0].pipectr = get_pipectr_addr(0);
+	r8a66597->pipenum2ep[0] = &r8a66597->ep[0];
+	r8a66597->epaddr2ep[0] = &r8a66597->ep[0];
+
+	the_controller = r8a66597;
+
+	r8a66597->ep0_req = r8a66597_alloc_request(&r8a66597->ep[0].ep,
+							GFP_KERNEL);
+	if (r8a66597->ep0_req == NULL)
+		goto clean_up3;
+	r8a66597->ep0_req->complete = nop_completion;
+
+	init_controller(r8a66597);
+
+	dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION);
+	return 0;
+
+clean_up3:
+	free_irq(irq, r8a66597);
+clean_up2:
+#ifdef CONFIG_HAVE_CLK
+	if (r8a66597->pdata->on_chip) {
+		clk_disable(r8a66597->clk);
+		clk_put(r8a66597->clk);
+	}
+#endif
+clean_up:
+	if (r8a66597) {
+		if (r8a66597->ep0_req)
+			r8a66597_free_request(&r8a66597->ep[0].ep,
+						r8a66597->ep0_req);
+		kfree(r8a66597);
+	}
+	if (reg)
+		iounmap(reg);
+
+	return ret;
+}
+
+/*-------------------------------------------------------------------------*/
+static struct platform_driver r8a66597_driver = {
+	.remove =	__exit_p(r8a66597_remove),
+	.driver		= {
+		.name =	(char *) udc_name,
+	},
+};
+
+static int __init r8a66597_udc_init(void)
+{
+	return platform_driver_probe(&r8a66597_driver, r8a66597_probe);
+}
+module_init(r8a66597_udc_init);
+
+static void __exit r8a66597_udc_cleanup(void)
+{
+	platform_driver_unregister(&r8a66597_driver);
+}
+module_exit(r8a66597_udc_cleanup);
+
+MODULE_DESCRIPTION("R8A66597 USB gadget driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Yoshihiro Shimoda");
+
diff --git a/drivers/usb/gadget/r8a66597-udc.h b/drivers/usb/gadget/r8a66597-udc.h
new file mode 100644
index 000000000000..03087e7b9190
--- /dev/null
+++ b/drivers/usb/gadget/r8a66597-udc.h
@@ -0,0 +1,256 @@
+/*
+ * R8A66597 UDC
+ *
+ * Copyright (C) 2007-2009 Renesas Solutions Corp.
+ *
+ * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef __R8A66597_H__
+#define __R8A66597_H__
+
+#ifdef CONFIG_HAVE_CLK
+#include <linux/clk.h>
+#endif
+
+#include <linux/usb/r8a66597.h>
+
+#define R8A66597_MAX_SAMPLING	10
+
+#define R8A66597_MAX_NUM_PIPE	8
+#define R8A66597_MAX_NUM_BULK	3
+#define R8A66597_MAX_NUM_ISOC	2
+#define R8A66597_MAX_NUM_INT	2
+
+#define R8A66597_BASE_PIPENUM_BULK	3
+#define R8A66597_BASE_PIPENUM_ISOC	1
+#define R8A66597_BASE_PIPENUM_INT	6
+
+#define R8A66597_BASE_BUFNUM	6
+#define R8A66597_MAX_BUFNUM	0x4F
+
+#define is_bulk_pipe(pipenum)	\
+	((pipenum >= R8A66597_BASE_PIPENUM_BULK) && \
+	 (pipenum < (R8A66597_BASE_PIPENUM_BULK + R8A66597_MAX_NUM_BULK)))
+#define is_interrupt_pipe(pipenum)	\
+	((pipenum >= R8A66597_BASE_PIPENUM_INT) && \
+	 (pipenum < (R8A66597_BASE_PIPENUM_INT + R8A66597_MAX_NUM_INT)))
+#define is_isoc_pipe(pipenum)	\
+	((pipenum >= R8A66597_BASE_PIPENUM_ISOC) && \
+	 (pipenum < (R8A66597_BASE_PIPENUM_ISOC + R8A66597_MAX_NUM_ISOC)))
+
+struct r8a66597_pipe_info {
+	u16	pipe;
+	u16	epnum;
+	u16	maxpacket;
+	u16	type;
+	u16	interval;
+	u16	dir_in;
+};
+
+struct r8a66597_request {
+	struct usb_request	req;
+	struct list_head	queue;
+};
+
+struct r8a66597_ep {
+	struct usb_ep		ep;
+	struct r8a66597		*r8a66597;
+
+	struct list_head	queue;
+	unsigned		busy:1;
+	unsigned		wedge:1;
+	unsigned		internal_ccpl:1;	/* use only control */
+
+	/* this member can able to after r8a66597_enable */
+	unsigned		use_dma:1;
+	u16			pipenum;
+	u16			type;
+	const struct usb_endpoint_descriptor	*desc;
+	/* register address */
+	unsigned char		fifoaddr;
+	unsigned char		fifosel;
+	unsigned char		fifoctr;
+	unsigned char		fifotrn;
+	unsigned char		pipectr;
+};
+
+struct r8a66597 {
+	spinlock_t		lock;
+	unsigned long		reg;
+
+#ifdef CONFIG_HAVE_CLK
+	struct clk *clk;
+#endif
+	struct r8a66597_platdata	*pdata;
+
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+
+	struct r8a66597_ep	ep[R8A66597_MAX_NUM_PIPE];
+	struct r8a66597_ep	*pipenum2ep[R8A66597_MAX_NUM_PIPE];
+	struct r8a66597_ep	*epaddr2ep[16];
+
+	struct timer_list	timer;
+	struct usb_request	*ep0_req;	/* for internal request */
+	u16			ep0_data;	/* for internal request */
+	u16			old_vbus;
+	u16			scount;
+	u16			old_dvsq;
+
+	/* pipe config */
+	unsigned char bulk;
+	unsigned char interrupt;
+	unsigned char isochronous;
+	unsigned char num_dma;
+
+	unsigned irq_sense_low:1;
+};
+
+#define gadget_to_r8a66597(_gadget)	\
+		container_of(_gadget, struct r8a66597, gadget)
+#define r8a66597_to_gadget(r8a66597) (&r8a66597->gadget)
+
+static inline u16 r8a66597_read(struct r8a66597 *r8a66597, unsigned long offset)
+{
+	return inw(r8a66597->reg + offset);
+}
+
+static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
+				      unsigned long offset, u16 *buf,
+				      int len)
+{
+	if (r8a66597->pdata->on_chip) {
+		unsigned long fifoaddr = r8a66597->reg + offset;
+		unsigned long count;
+		union {
+			unsigned long dword;
+			unsigned char byte[4];
+		} data;
+		unsigned char *pb;
+		int i;
+
+		count = len / 4;
+		insl(fifoaddr, buf, count);
+
+		if (len & 0x00000003) {
+			data.dword = inl(fifoaddr);
+			pb = (unsigned char *)buf + count * 4;
+			for (i = 0; i < (len & 0x00000003); i++)
+				pb[i] = data.byte[i];
+		}
+	} else {
+		len = (len + 1) / 2;
+		insw(r8a66597->reg + offset, buf, len);
+	}
+}
+
+static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val,
+				  unsigned long offset)
+{
+	outw(val, r8a66597->reg + offset);
+}
+
+static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
+				       unsigned long offset, u16 *buf,
+				       int len)
+{
+	unsigned long fifoaddr = r8a66597->reg + offset;
+
+	if (r8a66597->pdata->on_chip) {
+		unsigned long count;
+		unsigned char *pb;
+		int i;
+
+		count = len / 4;
+		outsl(fifoaddr, buf, count);
+
+		if (len & 0x00000003) {
+			pb = (unsigned char *)buf + count * 4;
+			for (i = 0; i < (len & 0x00000003); i++) {
+				if (r8a66597_read(r8a66597, CFIFOSEL) & BIGEND)
+					outb(pb[i], fifoaddr + i);
+				else
+					outb(pb[i], fifoaddr + 3 - i);
+			}
+		}
+	} else {
+		int odd = len & 0x0001;
+
+		len = len / 2;
+		outsw(fifoaddr, buf, len);
+		if (unlikely(odd)) {
+			buf = &buf[len];
+			outb((unsigned char)*buf, fifoaddr);
+		}
+	}
+}
+
+static inline void r8a66597_mdfy(struct r8a66597 *r8a66597,
+				 u16 val, u16 pat, unsigned long offset)
+{
+	u16 tmp;
+	tmp = r8a66597_read(r8a66597, offset);
+	tmp = tmp & (~pat);
+	tmp = tmp | val;
+	r8a66597_write(r8a66597, tmp, offset);
+}
+
+static inline u16 get_xtal_from_pdata(struct r8a66597_platdata *pdata)
+{
+	u16 clock = 0;
+
+	switch (pdata->xtal) {
+	case R8A66597_PLATDATA_XTAL_12MHZ:
+		clock = XTAL12;
+		break;
+	case R8A66597_PLATDATA_XTAL_24MHZ:
+		clock = XTAL24;
+		break;
+	case R8A66597_PLATDATA_XTAL_48MHZ:
+		clock = XTAL48;
+		break;
+	default:
+		printk(KERN_ERR "r8a66597: platdata clock is wrong.\n");
+		break;
+	}
+
+	return clock;
+}
+
+#define r8a66597_bclr(r8a66597, val, offset)	\
+			r8a66597_mdfy(r8a66597, 0, val, offset)
+#define r8a66597_bset(r8a66597, val, offset)	\
+			r8a66597_mdfy(r8a66597, val, 0, offset)
+
+#define get_pipectr_addr(pipenum)	(PIPE1CTR + (pipenum - 1) * 2)
+
+#define enable_irq_ready(r8a66597, pipenum)	\
+	enable_pipe_irq(r8a66597, pipenum, BRDYENB)
+#define disable_irq_ready(r8a66597, pipenum)	\
+	disable_pipe_irq(r8a66597, pipenum, BRDYENB)
+#define enable_irq_empty(r8a66597, pipenum)	\
+	enable_pipe_irq(r8a66597, pipenum, BEMPENB)
+#define disable_irq_empty(r8a66597, pipenum)	\
+	disable_pipe_irq(r8a66597, pipenum, BEMPENB)
+#define enable_irq_nrdy(r8a66597, pipenum)	\
+	enable_pipe_irq(r8a66597, pipenum, NRDYENB)
+#define disable_irq_nrdy(r8a66597, pipenum)	\
+	disable_pipe_irq(r8a66597, pipenum, NRDYENB)
+
+#endif	/* __R8A66597_H__ */
+
diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c
index ca41b0b5afb3..48267bc0b2e0 100644
--- a/drivers/usb/gadget/rndis.c
+++ b/drivers/usb/gadget/rndis.c
@@ -1022,22 +1022,29 @@ static rndis_resp_t *rndis_add_response (int configNr, u32 length)
 	return r;
 }
 
-int rndis_rm_hdr(struct sk_buff *skb)
+int rndis_rm_hdr(struct gether *port,
+			struct sk_buff *skb,
+			struct sk_buff_head *list)
 {
 	/* tmp points to a struct rndis_packet_msg_type */
 	__le32		*tmp = (void *) skb->data;
 
 	/* MessageType, MessageLength */
 	if (cpu_to_le32(REMOTE_NDIS_PACKET_MSG)
-			!= get_unaligned(tmp++))
+			!= get_unaligned(tmp++)) {
+		dev_kfree_skb_any(skb);
 		return -EINVAL;
+	}
 	tmp++;
 
 	/* DataOffset, DataLength */
-	if (!skb_pull(skb, get_unaligned_le32(tmp++) + 8))
+	if (!skb_pull(skb, get_unaligned_le32(tmp++) + 8)) {
+		dev_kfree_skb_any(skb);
 		return -EOVERFLOW;
+	}
 	skb_trim(skb, get_unaligned_le32(tmp++));
 
+	skb_queue_tail(list, skb);
 	return 0;
 }
 
diff --git a/drivers/usb/gadget/rndis.h b/drivers/usb/gadget/rndis.h
index aac61dfe0f03..c236aaa9dcd1 100644
--- a/drivers/usb/gadget/rndis.h
+++ b/drivers/usb/gadget/rndis.h
@@ -251,7 +251,8 @@ int  rndis_set_param_vendor (u8 configNr, u32 vendorID,
 			    const char *vendorDescr);
 int  rndis_set_param_medium (u8 configNr, u32 medium, u32 speed);
 void rndis_add_hdr (struct sk_buff *skb);
-int rndis_rm_hdr (struct sk_buff *skb);
+int rndis_rm_hdr(struct gether *port, struct sk_buff *skb,
+			struct sk_buff_head *list);
 u8   *rndis_get_next_response (int configNr, u32 *length);
 void rndis_free_response (int configNr, u8 *buf);
 
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 50c71aae2cc2..4b5dbd0127f5 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -2392,7 +2392,7 @@ static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg)
 		grstctl = readl(hsotg->regs + S3C_GRSTCTL);
 	} while (!(grstctl & S3C_GRSTCTL_CSftRst) && timeout-- > 0);
 
-	if (!grstctl & S3C_GRSTCTL_CSftRst) {
+	if (!(grstctl & S3C_GRSTCTL_CSftRst)) {
 		dev_err(hsotg->dev, "Failed to get CSftRst asserted\n");
 		return -EINVAL;
 	}
@@ -2514,8 +2514,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
 	 * DMA mode we may need this. */
 	writel(S3C_DOEPMSK_SetupMsk | S3C_DOEPMSK_AHBErrMsk |
 	       S3C_DOEPMSK_EPDisbldMsk |
-	       using_dma(hsotg) ? (S3C_DIEPMSK_XferComplMsk |
-				   S3C_DIEPMSK_TimeOUTMsk) : 0,
+	       (using_dma(hsotg) ? (S3C_DIEPMSK_XferComplMsk |
+				   S3C_DIEPMSK_TimeOUTMsk) : 0),
 	       hsotg->regs + S3C_DOEPMSK);
 
 	writel(0, hsotg->regs + S3C_DAINTMSK);
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index a9b452fe6221..d5f4c1d45c97 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -1703,8 +1703,7 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 	dprintk(DEBUG_NORMAL,"usb_gadget_register_driver() '%s'\n",
 		driver->driver.name);
 
-	if (driver->disconnect)
-		driver->disconnect(&udc->gadget);
+	driver->unbind(&udc->gadget);
 
 	device_del(&udc->gadget.dev);
 	udc->driver = NULL;
diff --git a/drivers/usb/gadget/u_audio.c b/drivers/usb/gadget/u_audio.c
index 0f3d22fc030e..8252595d619d 100644
--- a/drivers/usb/gadget/u_audio.c
+++ b/drivers/usb/gadget/u_audio.c
@@ -10,7 +10,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/utsname.h>
 #include <linux/device.h>
 #include <linux/delay.h>
 #include <linux/ctype.h>
@@ -253,11 +252,13 @@ static int gaudio_open_snd_dev(struct gaudio *card)
 	snd->filp = filp_open(fn_cap, O_RDONLY, 0);
 	if (IS_ERR(snd->filp)) {
 		ERROR(card, "No such PCM capture device: %s\n", fn_cap);
-		snd->filp = NULL;
+		snd->substream = NULL;
+		snd->card = NULL;
+	} else {
+		pcm_file = snd->filp->private_data;
+		snd->substream = pcm_file->substream;
+		snd->card = card;
 	}
-	pcm_file = snd->filp->private_data;
-	snd->substream = pcm_file->substream;
-	snd->card = card;
 
 	return 0;
 }
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index c66521953917..2fc02bd95848 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -23,7 +23,6 @@
 /* #define VERBOSE_DEBUG */
 
 #include <linux/kernel.h>
-#include <linux/utsname.h>
 #include <linux/device.h>
 #include <linux/ctype.h>
 #include <linux/etherdevice.h>
@@ -37,8 +36,9 @@
  * one (!) network link through the USB gadget stack, normally "usb0".
  *
  * The control and data models are handled by the function driver which
- * connects to this code; such as CDC Ethernet, "CDC Subset", or RNDIS.
- * That includes all descriptor and endpoint management.
+ * connects to this code; such as CDC Ethernet (ECM or EEM),
+ * "CDC Subset", or RNDIS.  That includes all descriptor and endpoint
+ * management.
  *
  * Link level addressing is handled by this component using module
  * parameters; if no such parameters are provided, random link level
@@ -68,9 +68,13 @@ struct eth_dev {
 	struct list_head	tx_reqs, rx_reqs;
 	atomic_t		tx_qlen;
 
+	struct sk_buff_head	rx_frames;
+
 	unsigned		header_len;
-	struct sk_buff		*(*wrap)(struct sk_buff *skb);
-	int			(*unwrap)(struct sk_buff *skb);
+	struct sk_buff		*(*wrap)(struct gether *, struct sk_buff *skb);
+	int			(*unwrap)(struct gether *,
+						struct sk_buff *skb,
+						struct sk_buff_head *list);
 
 	struct work_struct	work;
 
@@ -269,7 +273,7 @@ enomem:
 
 static void rx_complete(struct usb_ep *ep, struct usb_request *req)
 {
-	struct sk_buff	*skb = req->context;
+	struct sk_buff	*skb = req->context, *skb2;
 	struct eth_dev	*dev = ep->driver_data;
 	int		status = req->status;
 
@@ -278,26 +282,47 @@ static void rx_complete(struct usb_ep *ep, struct usb_request *req)
 	/* normal completion */
 	case 0:
 		skb_put(skb, req->actual);
-		if (dev->unwrap)
-			status = dev->unwrap(skb);
-		if (status < 0
-				|| ETH_HLEN > skb->len
-				|| skb->len > ETH_FRAME_LEN) {
-			dev->net->stats.rx_errors++;
-			dev->net->stats.rx_length_errors++;
-			DBG(dev, "rx length %d\n", skb->len);
-			break;
-		}
 
-		skb->protocol = eth_type_trans(skb, dev->net);
-		dev->net->stats.rx_packets++;
-		dev->net->stats.rx_bytes += skb->len;
+		if (dev->unwrap) {
+			unsigned long	flags;
 
-		/* no buffer copies needed, unless hardware can't
-		 * use skb buffers.
-		 */
-		status = netif_rx(skb);
+			spin_lock_irqsave(&dev->lock, flags);
+			if (dev->port_usb) {
+				status = dev->unwrap(dev->port_usb,
+							skb,
+							&dev->rx_frames);
+			} else {
+				dev_kfree_skb_any(skb);
+				status = -ENOTCONN;
+			}
+			spin_unlock_irqrestore(&dev->lock, flags);
+		} else {
+			skb_queue_tail(&dev->rx_frames, skb);
+		}
 		skb = NULL;
+
+		skb2 = skb_dequeue(&dev->rx_frames);
+		while (skb2) {
+			if (status < 0
+					|| ETH_HLEN > skb2->len
+					|| skb2->len > ETH_FRAME_LEN) {
+				dev->net->stats.rx_errors++;
+				dev->net->stats.rx_length_errors++;
+				DBG(dev, "rx length %d\n", skb2->len);
+				dev_kfree_skb_any(skb2);
+				goto next_frame;
+			}
+			skb2->protocol = eth_type_trans(skb2, dev->net);
+			dev->net->stats.rx_packets++;
+			dev->net->stats.rx_bytes += skb2->len;
+
+			/* no buffer copies needed, unless hardware can't
+			 * use skb buffers.
+			 */
+			status = netif_rx(skb2);
+next_frame:
+			skb2 = skb_dequeue(&dev->rx_frames);
+		}
 		break;
 
 	/* software-driven interface shutdown */
@@ -537,14 +562,15 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb,
 	 * or there's not enough space for extra headers we need
 	 */
 	if (dev->wrap) {
-		struct sk_buff	*skb_new;
+		unsigned long	flags;
 
-		skb_new = dev->wrap(skb);
-		if (!skb_new)
+		spin_lock_irqsave(&dev->lock, flags);
+		if (dev->port_usb)
+			skb = dev->wrap(dev->port_usb, skb);
+		spin_unlock_irqrestore(&dev->lock, flags);
+		if (!skb)
 			goto drop;
 
-		dev_kfree_skb_any(skb);
-		skb = skb_new;
 		length = skb->len;
 	}
 	req->buf = skb->data;
@@ -578,9 +604,9 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb,
 	}
 
 	if (retval) {
+		dev_kfree_skb_any(skb);
 drop:
 		dev->net->stats.tx_dropped++;
-		dev_kfree_skb_any(skb);
 		spin_lock_irqsave(&dev->req_lock, flags);
 		if (list_empty(&dev->tx_reqs))
 			netif_start_queue(net);
@@ -753,6 +779,8 @@ int __init gether_setup(struct usb_gadget *g, u8 ethaddr[ETH_ALEN])
 	INIT_LIST_HEAD(&dev->tx_reqs);
 	INIT_LIST_HEAD(&dev->rx_reqs);
 
+	skb_queue_head_init(&dev->rx_frames);
+
 	/* network device setup */
 	dev->net = net;
 	strcpy(net->name, "usb%d");
diff --git a/drivers/usb/gadget/u_ether.h b/drivers/usb/gadget/u_ether.h
index 0d1f7ae3b071..91b39ffdf6ea 100644
--- a/drivers/usb/gadget/u_ether.h
+++ b/drivers/usb/gadget/u_ether.h
@@ -60,12 +60,13 @@ struct gether {
 
 	u16				cdc_filter;
 
-	/* hooks for added framing, as needed for RNDIS and EEM.
-	 * we currently don't support multiple frames per SKB.
-	 */
+	/* hooks for added framing, as needed for RNDIS and EEM. */
 	u32				header_len;
-	struct sk_buff			*(*wrap)(struct sk_buff *skb);
-	int				(*unwrap)(struct sk_buff *skb);
+	struct sk_buff			*(*wrap)(struct gether *port,
+						struct sk_buff *skb);
+	int				(*unwrap)(struct gether *port,
+						struct sk_buff *skb,
+						struct sk_buff_head *list);
 
 	/* called on network open/close */
 	void				(*open)(struct gether *);
@@ -109,6 +110,7 @@ static inline bool can_support_ecm(struct usb_gadget *gadget)
 /* each configuration may bind one instance of an ethernet link */
 int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
 int ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
+int eem_bind_config(struct usb_configuration *c);
 
 #ifdef CONFIG_USB_ETH_RNDIS
 
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index fc6e709f45b1..adf8260c3a6a 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -1114,7 +1114,6 @@ int __init gserial_setup(struct usb_gadget *g, unsigned count)
 	/* export the driver ... */
 	status = tty_register_driver(gs_tty_driver);
 	if (status) {
-		put_tty_driver(gs_tty_driver);
 		pr_err("%s: cannot register, err %d\n",
 				__func__, status);
 		goto fail;
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 1a920c70b5a1..9b43b226817f 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -113,6 +113,12 @@ config USB_EHCI_HCD_PPC_OF
 	  Enables support for the USB controller present on the PowerPC
 	  OpenFirmware platform bus.
 
+config USB_W90X900_EHCI
+	bool "W90X900(W90P910) EHCI support"
+	depends on USB_EHCI_HCD && ARCH_W90X900
+	---help---
+		Enables support for the W90X900 USB controller
+
 config USB_OXU210HP_HCD
 	tristate "OXU210HP HCD support"
 	depends on USB
@@ -153,6 +159,18 @@ config USB_ISP1760_HCD
 	  To compile this driver as a module, choose M here: the
 	  module will be called isp1760.
 
+config USB_ISP1362_HCD
+	tristate "ISP1362 HCD support"
+	depends on USB
+	default N
+	---help---
+	  Supports the Philips ISP1362 chip as a host controller
+
+	  This driver does not support isochronous transfers.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called isp1362-hcd.
+
 config USB_OHCI_HCD
 	tristate "OHCI HCD support"
 	depends on USB && USB_ARCH_HAS_OHCI
@@ -336,13 +354,6 @@ config USB_R8A66597_HCD
 	  To compile this driver as a module, choose M here: the
 	  module will be called r8a66597-hcd.
 
-config SUPERH_ON_CHIP_R8A66597
-	boolean "Enable SuperH on-chip R8A66597 USB"
-	depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7724)
-	help
-	   This driver enables support for the on-chip R8A66597 in the
-	   SH7366, SH7723 and SH7724 processors.
-
 config USB_WHCI_HCD
 	tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 289d748bb414..f58b2494c44a 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_PCI)		+= pci-quirks.o
 obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
 obj-$(CONFIG_USB_OXU210HP_HCD)	+= oxu210hp-hcd.o
 obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
+obj-$(CONFIG_USB_ISP1362_HCD)	+= isp1362-hcd.o
 obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
 obj-$(CONFIG_USB_UHCI_HCD)	+= uhci-hcd.o
 obj-$(CONFIG_USB_FHCI_HCD)	+= fhci.o
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
new file mode 100644
index 000000000000..87c1b7c34c0e
--- /dev/null
+++ b/drivers/usb/host/ehci-atmel.c
@@ -0,0 +1,230 @@
+/*
+ * Driver for EHCI UHP on Atmel chips
+ *
+ *  Copyright (C) 2009 Atmel Corporation,
+ *                     Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ *  Based on various ehci-*.c drivers
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+/* interface and function clocks */
+static struct clk *iclk, *fclk;
+static int clocked;
+
+/*-------------------------------------------------------------------------*/
+
+static void atmel_start_clock(void)
+{
+	clk_enable(iclk);
+	clk_enable(fclk);
+	clocked = 1;
+}
+
+static void atmel_stop_clock(void)
+{
+	clk_disable(fclk);
+	clk_disable(iclk);
+	clocked = 0;
+}
+
+static void atmel_start_ehci(struct platform_device *pdev)
+{
+	dev_dbg(&pdev->dev, "start\n");
+	atmel_start_clock();
+}
+
+static void atmel_stop_ehci(struct platform_device *pdev)
+{
+	dev_dbg(&pdev->dev, "stop\n");
+	atmel_stop_clock();
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int ehci_atmel_setup(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int retval = 0;
+
+	/* registers start at offset 0x0 */
+	ehci->caps = hcd->regs;
+	ehci->regs = hcd->regs +
+		HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+	dbg_hcs_params(ehci, "reset");
+	dbg_hcc_params(ehci, "reset");
+
+	/* cache this readonly data; minimize chip reads */
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+	retval = ehci_halt(ehci);
+	if (retval)
+		return retval;
+
+	/* data structure init */
+	retval = ehci_init(hcd);
+	if (retval)
+		return retval;
+
+	ehci->sbrn = 0x20;
+
+	ehci_reset(ehci);
+	ehci_port_power(ehci, 0);
+
+	return retval;
+}
+
+static const struct hc_driver ehci_atmel_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "Atmel EHCI UHP HS",
+	.hcd_priv_size		= sizeof(struct ehci_hcd),
+
+	/* generic hardware linkage */
+	.irq			= ehci_irq,
+	.flags			= HCD_MEMORY | HCD_USB2,
+
+	/* basic lifecycle operations */
+	.reset			= ehci_atmel_setup,
+	.start			= ehci_run,
+	.stop			= ehci_stop,
+	.shutdown		= ehci_shutdown,
+
+	/* managing i/o requests and associated device resources */
+	.urb_enqueue		= ehci_urb_enqueue,
+	.urb_dequeue		= ehci_urb_dequeue,
+	.endpoint_disable	= ehci_endpoint_disable,
+
+	/* scheduling support */
+	.get_frame_number	= ehci_get_frame,
+
+	/* root hub support */
+	.hub_status_data	= ehci_hub_status_data,
+	.hub_control		= ehci_hub_control,
+	.bus_suspend		= ehci_bus_suspend,
+	.bus_resume		= ehci_bus_resume,
+	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
+};
+
+static int __init ehci_atmel_drv_probe(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd;
+	const struct hc_driver *driver = &ehci_atmel_hc_driver;
+	struct resource *res;
+	int irq;
+	int retval;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_debug("Initializing Atmel-SoC USB Host Controller\n");
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0) {
+		dev_err(&pdev->dev,
+			"Found HC with no IRQ. Check %s setup!\n",
+			dev_name(&pdev->dev));
+		retval = -ENODEV;
+		goto fail_create_hcd;
+	}
+
+	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto fail_create_hcd;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev,
+			"Found HC with no register addr. Check %s setup!\n",
+			dev_name(&pdev->dev));
+		retval = -ENODEV;
+		goto fail_request_resource;
+	}
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = res->end - res->start + 1;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+				driver->description)) {
+		dev_dbg(&pdev->dev, "controller already in use\n");
+		retval = -EBUSY;
+		goto fail_request_resource;
+	}
+
+	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+	if (hcd->regs == NULL) {
+		dev_dbg(&pdev->dev, "error mapping memory\n");
+		retval = -EFAULT;
+		goto fail_ioremap;
+	}
+
+	iclk = clk_get(&pdev->dev, "ehci_clk");
+	if (IS_ERR(iclk)) {
+		dev_err(&pdev->dev, "Error getting interface clock\n");
+		retval = -ENOENT;
+		goto fail_get_iclk;
+	}
+	fclk = clk_get(&pdev->dev, "uhpck");
+	if (IS_ERR(fclk)) {
+		dev_err(&pdev->dev, "Error getting function clock\n");
+		retval = -ENOENT;
+		goto fail_get_fclk;
+	}
+
+	atmel_start_ehci(pdev);
+
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (retval)
+		goto fail_add_hcd;
+
+	return retval;
+
+fail_add_hcd:
+	atmel_stop_ehci(pdev);
+	clk_put(fclk);
+fail_get_fclk:
+	clk_put(iclk);
+fail_get_iclk:
+	iounmap(hcd->regs);
+fail_ioremap:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+fail_request_resource:
+	usb_put_hcd(hcd);
+fail_create_hcd:
+	dev_err(&pdev->dev, "init %s fail, %d\n",
+		dev_name(&pdev->dev), retval);
+
+	return retval;
+}
+
+static int __exit ehci_atmel_drv_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	ehci_shutdown(hcd);
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+
+	atmel_stop_ehci(pdev);
+	clk_put(fclk);
+	clk_put(iclk);
+	fclk = iclk = NULL;
+
+	return 0;
+}
+
+static struct platform_driver ehci_atmel_driver = {
+	.probe		= ehci_atmel_drv_probe,
+	.remove		= __exit_p(ehci_atmel_drv_remove),
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver.name	= "atmel-ehci",
+};
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index 59d208d94d4e..ed77be76d6bb 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -199,10 +199,9 @@ static int ehci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM
-static int ehci_hcd_au1xxx_drv_suspend(struct platform_device *pdev,
-					pm_message_t message)
+static int ehci_hcd_au1xxx_drv_suspend(struct device *dev)
 {
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 	unsigned long flags;
 	int rc;
@@ -229,12 +228,6 @@ static int ehci_hcd_au1xxx_drv_suspend(struct platform_device *pdev,
 	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
 	(void)ehci_readl(ehci, &ehci->regs->intr_enable);
 
-	/* make sure snapshot being resumed re-enumerates everything */
-	if (message.event == PM_EVENT_PRETHAW) {
-		ehci_halt(ehci);
-		ehci_reset(ehci);
-	}
-
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 
 	au1xxx_stop_ehc();
@@ -248,10 +241,9 @@ bail:
 	return rc;
 }
 
-
-static int ehci_hcd_au1xxx_drv_resume(struct platform_device *pdev)
+static int ehci_hcd_au1xxx_drv_resume(struct device *dev)
 {
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 
 	au1xxx_start_ehc();
@@ -305,20 +297,25 @@ static int ehci_hcd_au1xxx_drv_resume(struct platform_device *pdev)
 	return 0;
 }
 
+static struct dev_pm_ops au1xxx_ehci_pmops = {
+	.suspend	= ehci_hcd_au1xxx_drv_suspend,
+	.resume		= ehci_hcd_au1xxx_drv_resume,
+};
+
+#define AU1XXX_EHCI_PMOPS &au1xxx_ehci_pmops
+
 #else
-#define ehci_hcd_au1xxx_drv_suspend NULL
-#define ehci_hcd_au1xxx_drv_resume NULL
+#define AU1XXX_EHCI_PMOPS NULL
 #endif
 
 static struct platform_driver ehci_hcd_au1xxx_driver = {
 	.probe		= ehci_hcd_au1xxx_drv_probe,
 	.remove		= ehci_hcd_au1xxx_drv_remove,
 	.shutdown	= usb_hcd_platform_shutdown,
-	.suspend	= ehci_hcd_au1xxx_drv_suspend,
-	.resume		= ehci_hcd_au1xxx_drv_resume,
 	.driver = {
 		.name	= "au1xxx-ehci",
 		.owner	= THIS_MODULE,
+		.pm	= AU1XXX_EHCI_PMOPS,
 	}
 };
 
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index 7f4ace73d44a..874d2000bf92 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -134,10 +134,11 @@ dbg_qtd (const char *label, struct ehci_hcd *ehci, struct ehci_qtd *qtd)
 static void __maybe_unused
 dbg_qh (const char *label, struct ehci_hcd *ehci, struct ehci_qh *qh)
 {
+	struct ehci_qh_hw *hw = qh->hw;
+
 	ehci_dbg (ehci, "%s qh %p n%08x info %x %x qtd %x\n", label,
-		qh, qh->hw_next, qh->hw_info1, qh->hw_info2,
-		qh->hw_current);
-	dbg_qtd ("overlay", ehci, (struct ehci_qtd *) &qh->hw_qtd_next);
+		qh, hw->hw_next, hw->hw_info1, hw->hw_info2, hw->hw_current);
+	dbg_qtd("overlay", ehci, (struct ehci_qtd *) &hw->hw_qtd_next);
 }
 
 static void __maybe_unused
@@ -400,31 +401,32 @@ static void qh_lines (
 	char			*next = *nextp;
 	char			mark;
 	__le32			list_end = EHCI_LIST_END(ehci);
+	struct ehci_qh_hw	*hw = qh->hw;
 
-	if (qh->hw_qtd_next == list_end)	/* NEC does this */
+	if (hw->hw_qtd_next == list_end)	/* NEC does this */
 		mark = '@';
 	else
-		mark = token_mark(ehci, qh->hw_token);
+		mark = token_mark(ehci, hw->hw_token);
 	if (mark == '/') {	/* qh_alt_next controls qh advance? */
-		if ((qh->hw_alt_next & QTD_MASK(ehci))
-				== ehci->async->hw_alt_next)
+		if ((hw->hw_alt_next & QTD_MASK(ehci))
+				== ehci->async->hw->hw_alt_next)
 			mark = '#';	/* blocked */
-		else if (qh->hw_alt_next == list_end)
+		else if (hw->hw_alt_next == list_end)
 			mark = '.';	/* use hw_qtd_next */
 		/* else alt_next points to some other qtd */
 	}
-	scratch = hc32_to_cpup(ehci, &qh->hw_info1);
-	hw_curr = (mark == '*') ? hc32_to_cpup(ehci, &qh->hw_current) : 0;
+	scratch = hc32_to_cpup(ehci, &hw->hw_info1);
+	hw_curr = (mark == '*') ? hc32_to_cpup(ehci, &hw->hw_current) : 0;
 	temp = scnprintf (next, size,
 			"qh/%p dev%d %cs ep%d %08x %08x (%08x%c %s nak%d)",
 			qh, scratch & 0x007f,
 			speed_char (scratch),
 			(scratch >> 8) & 0x000f,
-			scratch, hc32_to_cpup(ehci, &qh->hw_info2),
-			hc32_to_cpup(ehci, &qh->hw_token), mark,
-			(cpu_to_hc32(ehci, QTD_TOGGLE) & qh->hw_token)
+			scratch, hc32_to_cpup(ehci, &hw->hw_info2),
+			hc32_to_cpup(ehci, &hw->hw_token), mark,
+			(cpu_to_hc32(ehci, QTD_TOGGLE) & hw->hw_token)
 				? "data1" : "data0",
-			(hc32_to_cpup(ehci, &qh->hw_alt_next) >> 1) & 0x0f);
+			(hc32_to_cpup(ehci, &hw->hw_alt_next) >> 1) & 0x0f);
 	size -= temp;
 	next += temp;
 
@@ -435,10 +437,10 @@ static void qh_lines (
 		mark = ' ';
 		if (hw_curr == td->qtd_dma)
 			mark = '*';
-		else if (qh->hw_qtd_next == cpu_to_hc32(ehci, td->qtd_dma))
+		else if (hw->hw_qtd_next == cpu_to_hc32(ehci, td->qtd_dma))
 			mark = '+';
 		else if (QTD_LENGTH (scratch)) {
-			if (td->hw_alt_next == ehci->async->hw_alt_next)
+			if (td->hw_alt_next == ehci->async->hw->hw_alt_next)
 				mark = '#';
 			else if (td->hw_alt_next != list_end)
 				mark = '/';
@@ -550,12 +552,15 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
 		next += temp;
 
 		do {
+			struct ehci_qh_hw *hw;
+
 			switch (hc32_to_cpu(ehci, tag)) {
 			case Q_TYPE_QH:
+				hw = p.qh->hw;
 				temp = scnprintf (next, size, " qh%d-%04x/%p",
 						p.qh->period,
 						hc32_to_cpup(ehci,
-								&p.qh->hw_info2)
+							&hw->hw_info2)
 							/* uframe masks */
 							& (QH_CMASK | QH_SMASK),
 						p.qh);
@@ -576,7 +581,7 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
 				/* show more info the first time around */
 				if (temp == seen_count) {
 					u32	scratch = hc32_to_cpup(ehci,
-							&p.qh->hw_info1);
+							&hw->hw_info1);
 					struct ehci_qtd	*qtd;
 					char		*type = "";
 
@@ -609,7 +614,7 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
 				} else
 					temp = 0;
 				if (p.qh) {
-					tag = Q_NEXT_TYPE(ehci, p.qh->hw_next);
+					tag = Q_NEXT_TYPE(ehci, hw->hw_next);
 					p = p.qh->qh_next;
 				}
 				break;
@@ -879,8 +884,7 @@ static int debug_close(struct inode *inode, struct file *file)
 	struct debug_buffer *buf = file->private_data;
 
 	if (buf) {
-		if (buf->output_buf)
-			vfree(buf->output_buf);
+		vfree(buf->output_buf);
 		kfree(buf);
 	}
 
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 11c627ce6022..9835e0713943 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -30,7 +30,6 @@
 #include <linux/timer.h>
 #include <linux/list.h>
 #include <linux/interrupt.h>
-#include <linux/reboot.h>
 #include <linux/usb.h>
 #include <linux/moduleparam.h>
 #include <linux/dma-mapping.h>
@@ -127,6 +126,8 @@ timer_action(struct ehci_hcd *ehci, enum ehci_timer_action action)
 
 		switch (action) {
 		case TIMER_IO_WATCHDOG:
+			if (!ehci->need_io_watchdog)
+				return;
 			t = EHCI_IO_JIFFIES;
 			break;
 		case TIMER_ASYNC_OFF:
@@ -239,6 +240,11 @@ static int ehci_reset (struct ehci_hcd *ehci)
 	int	retval;
 	u32	command = ehci_readl(ehci, &ehci->regs->command);
 
+	/* If the EHCI debug controller is active, special care must be
+	 * taken before and after a host controller reset */
+	if (ehci->debug && !dbgp_reset_prep())
+		ehci->debug = NULL;
+
 	command |= CMD_RESET;
 	dbg_cmd (ehci, "reset", command);
 	ehci_writel(ehci, command, &ehci->regs->command);
@@ -247,12 +253,21 @@ static int ehci_reset (struct ehci_hcd *ehci)
 	retval = handshake (ehci, &ehci->regs->command,
 			    CMD_RESET, 0, 250 * 1000);
 
+	if (ehci->has_hostpc) {
+		ehci_writel(ehci, USBMODE_EX_HC | USBMODE_EX_VBPS,
+			(u32 __iomem *)(((u8 *)ehci->regs) + USBMODE_EX));
+		ehci_writel(ehci, TXFIFO_DEFAULT,
+			(u32 __iomem *)(((u8 *)ehci->regs) + TXFILLTUNING));
+	}
 	if (retval)
 		return retval;
 
 	if (ehci_is_TDI(ehci))
 		tdi_reset (ehci);
 
+	if (ehci->debug)
+		dbgp_external_startup();
+
 	return retval;
 }
 
@@ -505,9 +520,14 @@ static int ehci_init(struct usb_hcd *hcd)
 	u32			temp;
 	int			retval;
 	u32			hcc_params;
+	struct ehci_qh_hw	*hw;
 
 	spin_lock_init(&ehci->lock);
 
+	/*
+	 * keep io watchdog by default, those good HCDs could turn off it later
+	 */
+	ehci->need_io_watchdog = 1;
 	init_timer(&ehci->watchdog);
 	ehci->watchdog.function = ehci_watchdog;
 	ehci->watchdog.data = (unsigned long) ehci;
@@ -544,12 +564,13 @@ static int ehci_init(struct usb_hcd *hcd)
 	 * from automatically advancing to the next td after short reads.
 	 */
 	ehci->async->qh_next.qh = NULL;
-	ehci->async->hw_next = QH_NEXT(ehci, ehci->async->qh_dma);
-	ehci->async->hw_info1 = cpu_to_hc32(ehci, QH_HEAD);
-	ehci->async->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT);
-	ehci->async->hw_qtd_next = EHCI_LIST_END(ehci);
+	hw = ehci->async->hw;
+	hw->hw_next = QH_NEXT(ehci, ehci->async->qh_dma);
+	hw->hw_info1 = cpu_to_hc32(ehci, QH_HEAD);
+	hw->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT);
+	hw->hw_qtd_next = EHCI_LIST_END(ehci);
 	ehci->async->qh_state = QH_STATE_LINKED;
-	ehci->async->hw_alt_next = QTD_NEXT(ehci, ehci->async->dummy->qtd_dma);
+	hw->hw_alt_next = QTD_NEXT(ehci, ehci->async->dummy->qtd_dma);
 
 	/* clear interrupt enables, set irq latency */
 	if (log2_irq_thresh < 0 || log2_irq_thresh > 6)
@@ -850,12 +871,18 @@ static void unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 	if (!HC_IS_RUNNING(ehci_to_hcd(ehci)->state) && ehci->reclaim)
 		end_unlink_async(ehci);
 
-	/* if it's not linked then there's nothing to do */
-	if (qh->qh_state != QH_STATE_LINKED)
-		;
+	/* If the QH isn't linked then there's nothing we can do
+	 * unless we were called during a giveback, in which case
+	 * qh_completions() has to deal with it.
+	 */
+	if (qh->qh_state != QH_STATE_LINKED) {
+		if (qh->qh_state == QH_STATE_COMPLETING)
+			qh->needs_rescan = 1;
+		return;
+	}
 
 	/* defer till later if busy */
-	else if (ehci->reclaim) {
+	if (ehci->reclaim) {
 		struct ehci_qh		*last;
 
 		for (last = ehci->reclaim;
@@ -915,8 +942,9 @@ static int ehci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 			break;
 		switch (qh->qh_state) {
 		case QH_STATE_LINKED:
+		case QH_STATE_COMPLETING:
 			intr_deschedule (ehci, qh);
-			/* FALL THROUGH */
+			break;
 		case QH_STATE_IDLE:
 			qh_completions (ehci, qh);
 			break;
@@ -925,23 +953,6 @@ static int ehci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 					qh, qh->qh_state);
 			goto done;
 		}
-
-		/* reschedule QH iff another request is queued */
-		if (!list_empty (&qh->qtd_list)
-				&& HC_IS_RUNNING (hcd->state)) {
-			rc = qh_schedule(ehci, qh);
-
-			/* An error here likely indicates handshake failure
-			 * or no space left in the schedule.  Neither fault
-			 * should happen often ...
-			 *
-			 * FIXME kill the now-dysfunctional queued urbs
-			 */
-			if (rc != 0)
-				ehci_err(ehci,
-					"can't reschedule qh %p, err %d",
-					qh, rc);
-		}
 		break;
 
 	case PIPE_ISOCHRONOUS:
@@ -979,7 +990,7 @@ rescan:
 	/* endpoints can be iso streams.  for now, we don't
 	 * accelerate iso completions ... so spin a while.
 	 */
-	if (qh->hw_info1 == 0) {
+	if (qh->hw->hw_info1 == 0) {
 		ehci_vdbg (ehci, "iso delay\n");
 		goto idle_timeout;
 	}
@@ -988,6 +999,7 @@ rescan:
 		qh->qh_state = QH_STATE_IDLE;
 	switch (qh->qh_state) {
 	case QH_STATE_LINKED:
+	case QH_STATE_COMPLETING:
 		for (tmp = ehci->async->qh_next.qh;
 				tmp && tmp != qh;
 				tmp = tmp->qh_next.qh)
@@ -1052,18 +1064,17 @@ ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
 		usb_settoggle(qh->dev, epnum, is_out, 0);
 		if (!list_empty(&qh->qtd_list)) {
 			WARN_ONCE(1, "clear_halt for a busy endpoint\n");
-		} else if (qh->qh_state == QH_STATE_LINKED) {
+		} else if (qh->qh_state == QH_STATE_LINKED ||
+				qh->qh_state == QH_STATE_COMPLETING) {
 
 			/* The toggle value in the QH can't be updated
 			 * while the QH is active.  Unlink it now;
 			 * re-linking will call qh_refresh().
 			 */
-			if (eptype == USB_ENDPOINT_XFER_BULK) {
+			if (eptype == USB_ENDPOINT_XFER_BULK)
 				unlink_async(ehci, qh);
-			} else {
+			else
 				intr_deschedule(ehci, qh);
-				(void) qh_schedule(ehci, qh);
-			}
 		}
 	}
 	spin_unlock_irqrestore(&ehci->lock, flags);
@@ -1117,6 +1128,16 @@ MODULE_LICENSE ("GPL");
 #define	PLATFORM_DRIVER		ixp4xx_ehci_driver
 #endif
 
+#ifdef CONFIG_USB_W90X900_EHCI
+#include "ehci-w90x900.c"
+#define	PLATFORM_DRIVER		ehci_hcd_w90x900_driver
+#endif
+
+#ifdef CONFIG_ARCH_AT91
+#include "ehci-atmel.c"
+#define	PLATFORM_DRIVER		ehci_atmel_driver
+#endif
+
 #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
 #error "missing bus glue for ehci-hcd"
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index f46ad27c9a90..1b6f1c0e5cee 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -111,6 +111,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
 	int			port;
 	int			mask;
+	u32 __iomem		*hostpc_reg = NULL;
 
 	ehci_dbg(ehci, "suspend root hub\n");
 
@@ -142,6 +143,9 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 		u32		t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
 		u32		t2 = t1;
 
+		if (ehci->has_hostpc)
+			hostpc_reg = (u32 __iomem *)((u8 *)ehci->regs
+				+ HOSTPC0 + 4 * (port & 0xff));
 		/* keep track of which ports we suspend */
 		if (t1 & PORT_OWNER)
 			set_bit(port, &ehci->owned_ports);
@@ -151,15 +155,37 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 		}
 
 		/* enable remote wakeup on all ports */
-		if (hcd->self.root_hub->do_remote_wakeup)
-			t2 |= PORT_WAKE_BITS;
-		else
+		if (hcd->self.root_hub->do_remote_wakeup) {
+			/* only enable appropriate wake bits, otherwise the
+			 * hardware can not go phy low power mode. If a race
+			 * condition happens here(connection change during bits
+			 * set), the port change detection will finally fix it.
+			 */
+			if (t1 & PORT_CONNECT) {
+				t2 |= PORT_WKOC_E | PORT_WKDISC_E;
+				t2 &= ~PORT_WKCONN_E;
+			} else {
+				t2 |= PORT_WKOC_E | PORT_WKCONN_E;
+				t2 &= ~PORT_WKDISC_E;
+			}
+		} else
 			t2 &= ~PORT_WAKE_BITS;
 
 		if (t1 != t2) {
 			ehci_vdbg (ehci, "port %d, %08x -> %08x\n",
 				port + 1, t1, t2);
 			ehci_writel(ehci, t2, reg);
+			if (hostpc_reg) {
+				u32	t3;
+
+				msleep(5);/* 5ms for HCD enter low pwr mode */
+				t3 = ehci_readl(ehci, hostpc_reg);
+				ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg);
+				t3 = ehci_readl(ehci, hostpc_reg);
+				ehci_dbg(ehci, "Port%d phy low pwr mode %s\n",
+					port, (t3 & HOSTPC_PHCD) ?
+					"succeeded" : "failed");
+			}
 		}
 	}
 
@@ -183,6 +209,11 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 
 	ehci->next_statechange = jiffies + msecs_to_jiffies(10);
 	spin_unlock_irq (&ehci->lock);
+
+	/* ehci_work() may have re-enabled the watchdog timer, which we do not
+	 * want, and so we must delete any pending watchdog timer events.
+	 */
+	del_timer_sync(&ehci->watchdog);
 	return 0;
 }
 
@@ -204,6 +235,13 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
 		return -ESHUTDOWN;
 	}
 
+	if (unlikely(ehci->debug)) {
+		if (ehci->debug && !dbgp_reset_prep())
+			ehci->debug = NULL;
+		else
+			dbgp_external_startup();
+	}
+
 	/* Ideally and we've got a real resume here, and no port's power
 	 * was lost.  (For PCI, that means Vaux was maintained.)  But we
 	 * could instead be restoring a swsusp snapshot -- so that BIOS was
@@ -563,7 +601,8 @@ static int ehci_hub_control (
 	int		ports = HCS_N_PORTS (ehci->hcs_params);
 	u32 __iomem	*status_reg = &ehci->regs->port_status[
 				(wIndex & 0xff) - 1];
-	u32		temp, status;
+	u32 __iomem	*hostpc_reg = NULL;
+	u32		temp, temp1, status;
 	unsigned long	flags;
 	int		retval = 0;
 	unsigned	selector;
@@ -575,6 +614,9 @@ static int ehci_hub_control (
 	 * power, "this is the one", etc.  EHCI spec supports this.
 	 */
 
+	if (ehci->has_hostpc)
+		hostpc_reg = (u32 __iomem *)((u8 *)ehci->regs
+				+ HOSTPC0 + 4 * ((wIndex & 0xff) - 1));
 	spin_lock_irqsave (&ehci->lock, flags);
 	switch (typeReq) {
 	case ClearHubFeature:
@@ -773,7 +815,11 @@ static int ehci_hub_control (
 		if (temp & PORT_CONNECT) {
 			status |= 1 << USB_PORT_FEAT_CONNECTION;
 			// status may be from integrated TT
-			status |= ehci_port_speed(ehci, temp);
+			if (ehci->has_hostpc) {
+				temp1 = ehci_readl(ehci, hostpc_reg);
+				status |= ehci_port_speed(ehci, temp1);
+			} else
+				status |= ehci_port_speed(ehci, temp);
 		}
 		if (temp & PORT_PE)
 			status |= 1 << USB_PORT_FEAT_ENABLE;
@@ -816,6 +862,15 @@ static int ehci_hub_control (
 	case SetPortFeature:
 		selector = wIndex >> 8;
 		wIndex &= 0xff;
+		if (unlikely(ehci->debug)) {
+			/* If the debug port is active any port
+			 * feature requests should get denied */
+			if (wIndex == HCS_DEBUG_PORT(ehci->hcs_params) &&
+			    (readl(&ehci->debug->control) & DBGP_ENABLED)) {
+				retval = -ENODEV;
+				goto error_exit;
+			}
+		}
 		if (!wIndex || wIndex > ports)
 			goto error;
 		wIndex--;
@@ -832,6 +887,24 @@ static int ehci_hub_control (
 					|| (temp & PORT_RESET) != 0)
 				goto error;
 			ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
+			/* After above check the port must be connected.
+			 * Set appropriate bit thus could put phy into low power
+			 * mode if we have hostpc feature
+			 */
+			if (hostpc_reg) {
+				temp &= ~PORT_WKCONN_E;
+				temp |= (PORT_WKDISC_E | PORT_WKOC_E);
+				ehci_writel(ehci, temp | PORT_SUSPEND,
+							status_reg);
+				msleep(5);/* 5ms for HCD enter low pwr mode */
+				temp1 = ehci_readl(ehci, hostpc_reg);
+				ehci_writel(ehci, temp1 | HOSTPC_PHCD,
+					hostpc_reg);
+				temp1 = ehci_readl(ehci, hostpc_reg);
+				ehci_dbg(ehci, "Port%d phy low pwr mode %s\n",
+					wIndex, (temp1 & HOSTPC_PHCD) ?
+					"succeeded" : "failed");
+			}
 			set_bit(wIndex, &ehci->suspended_ports);
 			break;
 		case USB_PORT_FEAT_POWER:
@@ -894,6 +967,7 @@ error:
 		/* "stall" on error */
 		retval = -EPIPE;
 	}
+error_exit:
 	spin_unlock_irqrestore (&ehci->lock, flags);
 	return retval;
 }
diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c
index 10d52919abbb..aeda96e0af67 100644
--- a/drivers/usb/host/ehci-mem.c
+++ b/drivers/usb/host/ehci-mem.c
@@ -75,7 +75,8 @@ static void qh_destroy(struct ehci_qh *qh)
 	}
 	if (qh->dummy)
 		ehci_qtd_free (ehci, qh->dummy);
-	dma_pool_free (ehci->qh_pool, qh, qh->qh_dma);
+	dma_pool_free(ehci->qh_pool, qh->hw, qh->qh_dma);
+	kfree(qh);
 }
 
 static struct ehci_qh *ehci_qh_alloc (struct ehci_hcd *ehci, gfp_t flags)
@@ -83,12 +84,14 @@ static struct ehci_qh *ehci_qh_alloc (struct ehci_hcd *ehci, gfp_t flags)
 	struct ehci_qh		*qh;
 	dma_addr_t		dma;
 
-	qh = (struct ehci_qh *)
-		dma_pool_alloc (ehci->qh_pool, flags, &dma);
+	qh = kzalloc(sizeof *qh, GFP_ATOMIC);
 	if (!qh)
-		return qh;
-
-	memset (qh, 0, sizeof *qh);
+		goto done;
+	qh->hw = (struct ehci_qh_hw *)
+		dma_pool_alloc(ehci->qh_pool, flags, &dma);
+	if (!qh->hw)
+		goto fail;
+	memset(qh->hw, 0, sizeof *qh->hw);
 	qh->refcount = 1;
 	qh->ehci = ehci;
 	qh->qh_dma = dma;
@@ -99,10 +102,15 @@ static struct ehci_qh *ehci_qh_alloc (struct ehci_hcd *ehci, gfp_t flags)
 	qh->dummy = ehci_qtd_alloc (ehci, flags);
 	if (qh->dummy == NULL) {
 		ehci_dbg (ehci, "no dummy td\n");
-		dma_pool_free (ehci->qh_pool, qh, qh->qh_dma);
-		qh = NULL;
+		goto fail1;
 	}
+done:
 	return qh;
+fail1:
+	dma_pool_free(ehci->qh_pool, qh->hw, qh->qh_dma);
+fail:
+	kfree(qh);
+	return NULL;
 }
 
 /* to share a qh (cpu threads, or hc) */
@@ -180,7 +188,7 @@ static int ehci_mem_init (struct ehci_hcd *ehci, gfp_t flags)
 	/* QHs for control/bulk/intr transfers */
 	ehci->qh_pool = dma_pool_create ("ehci_qh",
 			ehci_to_hcd(ehci)->self.controller,
-			sizeof (struct ehci_qh),
+			sizeof(struct ehci_qh_hw),
 			32 /* byte alignment (for hw parts) */,
 			4096 /* can't cross 4K */);
 	if (!ehci->qh_pool) {
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index c2f1b7df918c..378861b9d79a 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -27,28 +27,8 @@
 /* called after powerup, by probe or system-pm "wakeup" */
 static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
 {
-	u32			temp;
 	int			retval;
 
-	/* optional debug port, normally in the first BAR */
-	temp = pci_find_capability(pdev, 0x0a);
-	if (temp) {
-		pci_read_config_dword(pdev, temp, &temp);
-		temp >>= 16;
-		if ((temp & (3 << 13)) == (1 << 13)) {
-			temp &= 0x1fff;
-			ehci->debug = ehci_to_hcd(ehci)->regs + temp;
-			temp = ehci_readl(ehci, &ehci->debug->control);
-			ehci_info(ehci, "debug port %d%s\n",
-				HCS_DEBUG_PORT(ehci->hcs_params),
-				(temp & DBGP_ENABLED)
-					? " IN USE"
-					: "");
-			if (!(temp & DBGP_ENABLED))
-				ehci->debug = NULL;
-		}
-	}
-
 	/* we expect static quirk code to handle the "extended capabilities"
 	 * (currently just BIOS handoff) allowed starting with EHCI 0.96
 	 */
@@ -129,6 +109,9 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 		return retval;
 
 	switch (pdev->vendor) {
+	case PCI_VENDOR_ID_INTEL:
+		ehci->need_io_watchdog = 0;
+		break;
 	case PCI_VENDOR_ID_TDI:
 		if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
 			hcd->has_tt = 1;
@@ -192,6 +175,25 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 		break;
 	}
 
+	/* optional debug port, normally in the first BAR */
+	temp = pci_find_capability(pdev, 0x0a);
+	if (temp) {
+		pci_read_config_dword(pdev, temp, &temp);
+		temp >>= 16;
+		if ((temp & (3 << 13)) == (1 << 13)) {
+			temp &= 0x1fff;
+			ehci->debug = ehci_to_hcd(ehci)->regs + temp;
+			temp = ehci_readl(ehci, &ehci->debug->control);
+			ehci_info(ehci, "debug port %d%s\n",
+				HCS_DEBUG_PORT(ehci->hcs_params),
+				(temp & DBGP_ENABLED)
+					? " IN USE"
+					: "");
+			if (!(temp & DBGP_ENABLED))
+				ehci->debug = NULL;
+		}
+	}
+
 	ehci_reset(ehci);
 
 	/* at least the Genesys GL880S needs fixup here */
@@ -242,7 +244,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 	 * System suspend currently expects to be able to suspend the entire
 	 * device tree, device-at-a-time.  If we failed selective suspend
 	 * reports, system suspend would fail; so the root hub code must claim
-	 * success.  That's lying to usbcore, and it matters for for runtime
+	 * success.  That's lying to usbcore, and it matters for runtime
 	 * PM scenarios with selective suspend and remote wakeup...
 	 */
 	if (ehci->no_selective_suspend && device_can_wakeup(&pdev->dev))
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 7673554fa64d..00ad9ce392ed 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -87,31 +87,33 @@ qtd_fill(struct ehci_hcd *ehci, struct ehci_qtd *qtd, dma_addr_t buf,
 static inline void
 qh_update (struct ehci_hcd *ehci, struct ehci_qh *qh, struct ehci_qtd *qtd)
 {
+	struct ehci_qh_hw *hw = qh->hw;
+
 	/* writes to an active overlay are unsafe */
 	BUG_ON(qh->qh_state != QH_STATE_IDLE);
 
-	qh->hw_qtd_next = QTD_NEXT(ehci, qtd->qtd_dma);
-	qh->hw_alt_next = EHCI_LIST_END(ehci);
+	hw->hw_qtd_next = QTD_NEXT(ehci, qtd->qtd_dma);
+	hw->hw_alt_next = EHCI_LIST_END(ehci);
 
 	/* Except for control endpoints, we make hardware maintain data
 	 * toggle (like OHCI) ... here (re)initialize the toggle in the QH,
 	 * and set the pseudo-toggle in udev. Only usb_clear_halt() will
 	 * ever clear it.
 	 */
-	if (!(qh->hw_info1 & cpu_to_hc32(ehci, 1 << 14))) {
+	if (!(hw->hw_info1 & cpu_to_hc32(ehci, 1 << 14))) {
 		unsigned	is_out, epnum;
 
 		is_out = !(qtd->hw_token & cpu_to_hc32(ehci, 1 << 8));
-		epnum = (hc32_to_cpup(ehci, &qh->hw_info1) >> 8) & 0x0f;
+		epnum = (hc32_to_cpup(ehci, &hw->hw_info1) >> 8) & 0x0f;
 		if (unlikely (!usb_gettoggle (qh->dev, epnum, is_out))) {
-			qh->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
+			hw->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
 			usb_settoggle (qh->dev, epnum, is_out, 1);
 		}
 	}
 
 	/* HC must see latest qtd and qh data before we clear ACTIVE+HALT */
 	wmb ();
-	qh->hw_token &= cpu_to_hc32(ehci, QTD_TOGGLE | QTD_STS_PING);
+	hw->hw_token &= cpu_to_hc32(ehci, QTD_TOGGLE | QTD_STS_PING);
 }
 
 /* if it weren't for a common silicon quirk (writing the dummy into the qh
@@ -129,7 +131,7 @@ qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh)
 		qtd = list_entry (qh->qtd_list.next,
 				struct ehci_qtd, qtd_list);
 		/* first qtd may already be partially processed */
-		if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw_current)
+		if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current)
 			qtd = NULL;
 	}
 
@@ -260,7 +262,7 @@ __acquires(ehci->lock)
 		struct ehci_qh	*qh = (struct ehci_qh *) urb->hcpriv;
 
 		/* S-mask in a QH means it's an interrupt urb */
-		if ((qh->hw_info2 & cpu_to_hc32(ehci, QH_SMASK)) != 0) {
+		if ((qh->hw->hw_info2 & cpu_to_hc32(ehci, QH_SMASK)) != 0) {
 
 			/* ... update hc-wide periodic stats (for usbfs) */
 			ehci_to_hcd(ehci)->self.bandwidth_int_reqs--;
@@ -297,7 +299,6 @@ __acquires(ehci->lock)
 static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh);
 static void unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh);
 
-static void intr_deschedule (struct ehci_hcd *ehci, struct ehci_qh *qh);
 static int qh_schedule (struct ehci_hcd *ehci, struct ehci_qh *qh);
 
 /*
@@ -308,13 +309,14 @@ static int qh_schedule (struct ehci_hcd *ehci, struct ehci_qh *qh);
 static unsigned
 qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 {
-	struct ehci_qtd		*last = NULL, *end = qh->dummy;
+	struct ehci_qtd		*last, *end = qh->dummy;
 	struct list_head	*entry, *tmp;
-	int			last_status = -EINPROGRESS;
+	int			last_status;
 	int			stopped;
 	unsigned		count = 0;
 	u8			state;
-	__le32			halt = HALT_BIT(ehci);
+	const __le32		halt = HALT_BIT(ehci);
+	struct ehci_qh_hw	*hw = qh->hw;
 
 	if (unlikely (list_empty (&qh->qtd_list)))
 		return count;
@@ -324,11 +326,20 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 	 * they add urbs to this qh's queue or mark them for unlinking.
 	 *
 	 * NOTE:  unlinking expects to be done in queue order.
+	 *
+	 * It's a bug for qh->qh_state to be anything other than
+	 * QH_STATE_IDLE, unless our caller is scan_async() or
+	 * scan_periodic().
 	 */
 	state = qh->qh_state;
 	qh->qh_state = QH_STATE_COMPLETING;
 	stopped = (state == QH_STATE_IDLE);
 
+ rescan:
+	last = NULL;
+	last_status = -EINPROGRESS;
+	qh->needs_rescan = 0;
+
 	/* remove de-activated QTDs from front of queue.
 	 * after faults (including short reads), cleanup this urb
 	 * then let the queue advance.
@@ -392,7 +403,8 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 					qtd->hw_token = cpu_to_hc32(ehci,
 							token);
 					wmb();
-					qh->hw_token = cpu_to_hc32(ehci, token);
+					hw->hw_token = cpu_to_hc32(ehci,
+							token);
 					goto retry_xacterr;
 				}
 				stopped = 1;
@@ -435,8 +447,8 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 			/* qh unlinked; token in overlay may be most current */
 			if (state == QH_STATE_IDLE
 					&& cpu_to_hc32(ehci, qtd->qtd_dma)
-						== qh->hw_current) {
-				token = hc32_to_cpu(ehci, qh->hw_token);
+						== hw->hw_current) {
+				token = hc32_to_cpu(ehci, hw->hw_token);
 
 				/* An unlink may leave an incomplete
 				 * async transaction in the TT buffer.
@@ -449,9 +461,9 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 			 * patch the qh later and so that completions can't
 			 * activate it while we "know" it's stopped.
 			 */
-			if ((halt & qh->hw_token) == 0) {
+			if ((halt & hw->hw_token) == 0) {
 halt:
-				qh->hw_token |= halt;
+				hw->hw_token |= halt;
 				wmb ();
 			}
 		}
@@ -503,6 +515,21 @@ halt:
 		ehci_qtd_free (ehci, last);
 	}
 
+	/* Do we need to rescan for URBs dequeued during a giveback? */
+	if (unlikely(qh->needs_rescan)) {
+		/* If the QH is already unlinked, do the rescan now. */
+		if (state == QH_STATE_IDLE)
+			goto rescan;
+
+		/* Otherwise we have to wait until the QH is fully unlinked.
+		 * Our caller will start an unlink if qh->needs_rescan is
+		 * set.  But if an unlink has already started, nothing needs
+		 * to be done.
+		 */
+		if (state != QH_STATE_LINKED)
+			qh->needs_rescan = 0;
+	}
+
 	/* restore original state; caller must unlink or relink */
 	qh->qh_state = state;
 
@@ -510,7 +537,7 @@ halt:
 	 * it after fault cleanup, or recovering from silicon wrongly
 	 * overlaying the dummy qtd (which reduces DMA chatter).
 	 */
-	if (stopped != 0 || qh->hw_qtd_next == EHCI_LIST_END(ehci)) {
+	if (stopped != 0 || hw->hw_qtd_next == EHCI_LIST_END(ehci)) {
 		switch (state) {
 		case QH_STATE_IDLE:
 			qh_refresh(ehci, qh);
@@ -527,12 +554,9 @@ halt:
 			 * That should be rare for interrupt transfers,
 			 * except maybe high bandwidth ...
 			 */
-			if ((cpu_to_hc32(ehci, QH_SMASK)
-					& qh->hw_info2) != 0) {
-				intr_deschedule (ehci, qh);
-				(void) qh_schedule (ehci, qh);
-			} else
-				unlink_async (ehci, qh);
+
+			/* Tell the caller to start an unlink */
+			qh->needs_rescan = 1;
 			break;
 		/* otherwise, unlink already started */
 		}
@@ -649,7 +673,7 @@ qh_urb_transaction (
 		 * (this will usually be overridden later.)
 		 */
 		if (is_input)
-			qtd->hw_alt_next = ehci->async->hw_alt_next;
+			qtd->hw_alt_next = ehci->async->hw->hw_alt_next;
 
 		/* qh makes control packets use qtd toggle; maybe switch it */
 		if ((maxpacket & (this_qtd_len + (maxpacket - 1))) == 0)
@@ -744,6 +768,7 @@ qh_make (
 	int			is_input, type;
 	int			maxp = 0;
 	struct usb_tt		*tt = urb->dev->tt;
+	struct ehci_qh_hw	*hw;
 
 	if (!qh)
 		return qh;
@@ -890,8 +915,9 @@ done:
 
 	/* init as live, toggle clear, advance to dummy */
 	qh->qh_state = QH_STATE_IDLE;
-	qh->hw_info1 = cpu_to_hc32(ehci, info1);
-	qh->hw_info2 = cpu_to_hc32(ehci, info2);
+	hw = qh->hw;
+	hw->hw_info1 = cpu_to_hc32(ehci, info1);
+	hw->hw_info2 = cpu_to_hc32(ehci, info2);
 	usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), !is_input, 1);
 	qh_refresh (ehci, qh);
 	return qh;
@@ -910,6 +936,8 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 	if (unlikely(qh->clearing_tt))
 		return;
 
+	WARN_ON(qh->qh_state != QH_STATE_IDLE);
+
 	/* (re)start the async schedule? */
 	head = ehci->async;
 	timer_action_done (ehci, TIMER_ASYNC_OFF);
@@ -928,16 +956,15 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 	}
 
 	/* clear halt and/or toggle; and maybe recover from silicon quirk */
-	if (qh->qh_state == QH_STATE_IDLE)
-		qh_refresh (ehci, qh);
+	qh_refresh(ehci, qh);
 
 	/* splice right after start */
 	qh->qh_next = head->qh_next;
-	qh->hw_next = head->hw_next;
+	qh->hw->hw_next = head->hw->hw_next;
 	wmb ();
 
 	head->qh_next.qh = qh;
-	head->hw_next = dma;
+	head->hw->hw_next = dma;
 
 	qh_get(qh);
 	qh->xacterrs = 0;
@@ -984,7 +1011,7 @@ static struct ehci_qh *qh_append_tds (
 
                         /* usb_reset_device() briefly reverts to address 0 */
                         if (usb_pipedevice (urb->pipe) == 0)
-                                qh->hw_info1 &= ~qh_addr_mask;
+				qh->hw->hw_info1 &= ~qh_addr_mask;
 		}
 
 		/* just one way to queue requests: swap with the dummy qtd.
@@ -1169,7 +1196,7 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 	while (prev->qh_next.qh != qh)
 		prev = prev->qh_next.qh;
 
-	prev->hw_next = qh->hw_next;
+	prev->hw->hw_next = qh->hw->hw_next;
 	prev->qh_next = qh->qh_next;
 	wmb ();
 
@@ -1214,6 +1241,8 @@ rescan:
 				qh = qh_get (qh);
 				qh->stamp = ehci->stamp;
 				temp = qh_completions (ehci, qh);
+				if (qh->needs_rescan)
+					unlink_async(ehci, qh);
 				qh_put (qh);
 				if (temp != 0) {
 					goto rescan;
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index edd61ee90323..3ea05936851f 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -60,6 +60,20 @@ periodic_next_shadow(struct ehci_hcd *ehci, union ehci_shadow *periodic,
 	}
 }
 
+static __hc32 *
+shadow_next_periodic(struct ehci_hcd *ehci, union ehci_shadow *periodic,
+		__hc32 tag)
+{
+	switch (hc32_to_cpu(ehci, tag)) {
+	/* our ehci_shadow.qh is actually software part */
+	case Q_TYPE_QH:
+		return &periodic->qh->hw->hw_next;
+	/* others are hw parts */
+	default:
+		return periodic->hw_next;
+	}
+}
+
 /* caller must hold ehci->lock */
 static void periodic_unlink (struct ehci_hcd *ehci, unsigned frame, void *ptr)
 {
@@ -71,7 +85,8 @@ static void periodic_unlink (struct ehci_hcd *ehci, unsigned frame, void *ptr)
 	while (here.ptr && here.ptr != ptr) {
 		prev_p = periodic_next_shadow(ehci, prev_p,
 				Q_NEXT_TYPE(ehci, *hw_p));
-		hw_p = here.hw_next;
+		hw_p = shadow_next_periodic(ehci, &here,
+				Q_NEXT_TYPE(ehci, *hw_p));
 		here = *prev_p;
 	}
 	/* an interrupt entry (at list end) could have been shared */
@@ -83,7 +98,7 @@ static void periodic_unlink (struct ehci_hcd *ehci, unsigned frame, void *ptr)
 	 */
 	*prev_p = *periodic_next_shadow(ehci, &here,
 			Q_NEXT_TYPE(ehci, *hw_p));
-	*hw_p = *here.hw_next;
+	*hw_p = *shadow_next_periodic(ehci, &here, Q_NEXT_TYPE(ehci, *hw_p));
 }
 
 /* how many of the uframe's 125 usecs are allocated? */
@@ -93,18 +108,20 @@ periodic_usecs (struct ehci_hcd *ehci, unsigned frame, unsigned uframe)
 	__hc32			*hw_p = &ehci->periodic [frame];
 	union ehci_shadow	*q = &ehci->pshadow [frame];
 	unsigned		usecs = 0;
+	struct ehci_qh_hw	*hw;
 
 	while (q->ptr) {
 		switch (hc32_to_cpu(ehci, Q_NEXT_TYPE(ehci, *hw_p))) {
 		case Q_TYPE_QH:
+			hw = q->qh->hw;
 			/* is it in the S-mask? */
-			if (q->qh->hw_info2 & cpu_to_hc32(ehci, 1 << uframe))
+			if (hw->hw_info2 & cpu_to_hc32(ehci, 1 << uframe))
 				usecs += q->qh->usecs;
 			/* ... or C-mask? */
-			if (q->qh->hw_info2 & cpu_to_hc32(ehci,
+			if (hw->hw_info2 & cpu_to_hc32(ehci,
 					1 << (8 + uframe)))
 				usecs += q->qh->c_usecs;
-			hw_p = &q->qh->hw_next;
+			hw_p = &hw->hw_next;
 			q = &q->qh->qh_next;
 			break;
 		// case Q_TYPE_FSTN:
@@ -237,10 +254,10 @@ periodic_tt_usecs (
 			continue;
 		case Q_TYPE_QH:
 			if (same_tt(dev, q->qh->dev)) {
-				uf = tt_start_uframe(ehci, q->qh->hw_info2);
+				uf = tt_start_uframe(ehci, q->qh->hw->hw_info2);
 				tt_usecs[uf] += q->qh->tt_usecs;
 			}
-			hw_p = &q->qh->hw_next;
+			hw_p = &q->qh->hw->hw_next;
 			q = &q->qh->qh_next;
 			continue;
 		case Q_TYPE_SITD:
@@ -375,6 +392,7 @@ static int tt_no_collision (
 	for (; frame < ehci->periodic_size; frame += period) {
 		union ehci_shadow	here;
 		__hc32			type;
+		struct ehci_qh_hw	*hw;
 
 		here = ehci->pshadow [frame];
 		type = Q_NEXT_TYPE(ehci, ehci->periodic [frame]);
@@ -385,17 +403,18 @@ static int tt_no_collision (
 				here = here.itd->itd_next;
 				continue;
 			case Q_TYPE_QH:
+				hw = here.qh->hw;
 				if (same_tt (dev, here.qh->dev)) {
 					u32		mask;
 
 					mask = hc32_to_cpu(ehci,
-							here.qh->hw_info2);
+							hw->hw_info2);
 					/* "knows" no gap is needed */
 					mask |= mask >> 8;
 					if (mask & uf_mask)
 						break;
 				}
-				type = Q_NEXT_TYPE(ehci, here.qh->hw_next);
+				type = Q_NEXT_TYPE(ehci, hw->hw_next);
 				here = here.qh->qh_next;
 				continue;
 			case Q_TYPE_SITD:
@@ -498,7 +517,8 @@ static int qh_link_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh)
 
 	dev_dbg (&qh->dev->dev,
 		"link qh%d-%04x/%p start %d [%d/%d us]\n",
-		period, hc32_to_cpup(ehci, &qh->hw_info2) & (QH_CMASK | QH_SMASK),
+		period, hc32_to_cpup(ehci, &qh->hw->hw_info2)
+			& (QH_CMASK | QH_SMASK),
 		qh, qh->start, qh->usecs, qh->c_usecs);
 
 	/* high bandwidth, or otherwise every microframe */
@@ -517,7 +537,7 @@ static int qh_link_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh)
 			if (type == cpu_to_hc32(ehci, Q_TYPE_QH))
 				break;
 			prev = periodic_next_shadow(ehci, prev, type);
-			hw_p = &here.qh->hw_next;
+			hw_p = shadow_next_periodic(ehci, &here, type);
 			here = *prev;
 		}
 
@@ -528,14 +548,14 @@ static int qh_link_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh)
 			if (qh->period > here.qh->period)
 				break;
 			prev = &here.qh->qh_next;
-			hw_p = &here.qh->hw_next;
+			hw_p = &here.qh->hw->hw_next;
 			here = *prev;
 		}
 		/* link in this qh, unless some earlier pass did that */
 		if (qh != here.qh) {
 			qh->qh_next = here;
 			if (here.qh)
-				qh->hw_next = *hw_p;
+				qh->hw->hw_next = *hw_p;
 			wmb ();
 			prev->qh = qh;
 			*hw_p = QH_NEXT (ehci, qh->qh_dma);
@@ -581,7 +601,7 @@ static int qh_unlink_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh)
 	dev_dbg (&qh->dev->dev,
 		"unlink qh%d-%04x/%p start %d [%d/%d us]\n",
 		qh->period,
-		hc32_to_cpup(ehci, &qh->hw_info2) & (QH_CMASK | QH_SMASK),
+		hc32_to_cpup(ehci, &qh->hw->hw_info2) & (QH_CMASK | QH_SMASK),
 		qh, qh->start, qh->usecs, qh->c_usecs);
 
 	/* qh->qh_next still "live" to HC */
@@ -595,7 +615,19 @@ static int qh_unlink_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh)
 
 static void intr_deschedule (struct ehci_hcd *ehci, struct ehci_qh *qh)
 {
-	unsigned	wait;
+	unsigned		wait;
+	struct ehci_qh_hw	*hw = qh->hw;
+	int			rc;
+
+	/* If the QH isn't linked then there's nothing we can do
+	 * unless we were called during a giveback, in which case
+	 * qh_completions() has to deal with it.
+	 */
+	if (qh->qh_state != QH_STATE_LINKED) {
+		if (qh->qh_state == QH_STATE_COMPLETING)
+			qh->needs_rescan = 1;
+		return;
+	}
 
 	qh_unlink_periodic (ehci, qh);
 
@@ -606,15 +638,33 @@ static void intr_deschedule (struct ehci_hcd *ehci, struct ehci_qh *qh)
 	 */
 	if (list_empty (&qh->qtd_list)
 			|| (cpu_to_hc32(ehci, QH_CMASK)
-					& qh->hw_info2) != 0)
+					& hw->hw_info2) != 0)
 		wait = 2;
 	else
 		wait = 55;	/* worst case: 3 * 1024 */
 
 	udelay (wait);
 	qh->qh_state = QH_STATE_IDLE;
-	qh->hw_next = EHCI_LIST_END(ehci);
+	hw->hw_next = EHCI_LIST_END(ehci);
 	wmb ();
+
+	qh_completions(ehci, qh);
+
+	/* reschedule QH iff another request is queued */
+	if (!list_empty(&qh->qtd_list) &&
+			HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) {
+		rc = qh_schedule(ehci, qh);
+
+		/* An error here likely indicates handshake failure
+		 * or no space left in the schedule.  Neither fault
+		 * should happen often ...
+		 *
+		 * FIXME kill the now-dysfunctional queued urbs
+		 */
+		if (rc != 0)
+			ehci_err(ehci, "can't reschedule qh %p, err %d\n",
+					qh, rc);
+	}
 }
 
 /*-------------------------------------------------------------------------*/
@@ -739,14 +789,15 @@ static int qh_schedule(struct ehci_hcd *ehci, struct ehci_qh *qh)
 	unsigned	uframe;
 	__hc32		c_mask;
 	unsigned	frame;		/* 0..(qh->period - 1), or NO_FRAME */
+	struct ehci_qh_hw	*hw = qh->hw;
 
 	qh_refresh(ehci, qh);
-	qh->hw_next = EHCI_LIST_END(ehci);
+	hw->hw_next = EHCI_LIST_END(ehci);
 	frame = qh->start;
 
 	/* reuse the previous schedule slots, if we can */
 	if (frame < qh->period) {
-		uframe = ffs(hc32_to_cpup(ehci, &qh->hw_info2) & QH_SMASK);
+		uframe = ffs(hc32_to_cpup(ehci, &hw->hw_info2) & QH_SMASK);
 		status = check_intr_schedule (ehci, frame, --uframe,
 				qh, &c_mask);
 	} else {
@@ -784,11 +835,11 @@ static int qh_schedule(struct ehci_hcd *ehci, struct ehci_qh *qh)
 		qh->start = frame;
 
 		/* reset S-frame and (maybe) C-frame masks */
-		qh->hw_info2 &= cpu_to_hc32(ehci, ~(QH_CMASK | QH_SMASK));
-		qh->hw_info2 |= qh->period
+		hw->hw_info2 &= cpu_to_hc32(ehci, ~(QH_CMASK | QH_SMASK));
+		hw->hw_info2 |= qh->period
 			? cpu_to_hc32(ehci, 1 << uframe)
 			: cpu_to_hc32(ehci, QH_SMASK);
-		qh->hw_info2 |= c_mask;
+		hw->hw_info2 |= c_mask;
 	} else
 		ehci_dbg (ehci, "reused qh %p schedule\n", qh);
 
@@ -2188,10 +2239,11 @@ restart:
 			case Q_TYPE_QH:
 				/* handle any completions */
 				temp.qh = qh_get (q.qh);
-				type = Q_NEXT_TYPE(ehci, q.qh->hw_next);
+				type = Q_NEXT_TYPE(ehci, q.qh->hw->hw_next);
 				q = q.qh->qh_next;
 				modified = qh_completions (ehci, temp.qh);
-				if (unlikely (list_empty (&temp.qh->qtd_list)))
+				if (unlikely(list_empty(&temp.qh->qtd_list) ||
+						temp.qh->needs_rescan))
 					intr_deschedule (ehci, temp.qh);
 				qh_put (temp.qh);
 				break;
diff --git a/drivers/usb/host/ehci-w90x900.c b/drivers/usb/host/ehci-w90x900.c
new file mode 100644
index 000000000000..cfa21ea20f82
--- /dev/null
+++ b/drivers/usb/host/ehci-w90x900.c
@@ -0,0 +1,181 @@
+/*
+ * linux/driver/usb/host/ehci-w90x900.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+
+/*ebable phy0 and phy1 for w90p910*/
+#define	ENPHY		(0x01<<8)
+#define PHY0_CTR	(0xA4)
+#define PHY1_CTR	(0xA8)
+
+static int __devinit usb_w90x900_probe(const struct hc_driver *driver,
+		      struct platform_device *pdev)
+{
+	struct usb_hcd *hcd;
+	struct ehci_hcd *ehci;
+	struct resource *res;
+	int retval = 0, irq;
+	unsigned long val;
+
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		retval = -ENXIO;
+		goto err1;
+	}
+
+	hcd = usb_create_hcd(driver, &pdev->dev, "w90x900 EHCI");
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto err1;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = res->end - res->start + 1;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+		retval = -EBUSY;
+		goto err2;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (hcd->regs == NULL) {
+		retval = -EFAULT;
+		goto err3;
+	}
+
+	ehci = hcd_to_ehci(hcd);
+	ehci->caps = hcd->regs;
+	ehci->regs = hcd->regs +
+		 HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+
+	/* enable PHY 0,1,the regs only apply to w90p910
+	*  0xA4,0xA8 were offsets of PHY0 and PHY1 controller of
+	*  w90p910 IC relative to ehci->regs.
+	*/
+	val = __raw_readl(ehci->regs+PHY0_CTR);
+	val |= ENPHY;
+	__raw_writel(val, ehci->regs+PHY0_CTR);
+
+	val = __raw_readl(ehci->regs+PHY1_CTR);
+	val |= ENPHY;
+	__raw_writel(val, ehci->regs+PHY1_CTR);
+
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+	ehci->sbrn = 0x20;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		goto err4;
+
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (retval != 0)
+		goto err4;
+
+	ehci_writel(ehci, 1, &ehci->regs->configured_flag);
+
+	return retval;
+err4:
+	iounmap(hcd->regs);
+err3:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err2:
+	usb_put_hcd(hcd);
+err1:
+	return retval;
+}
+
+static
+void usb_w90x900_remove(struct usb_hcd *hcd, struct platform_device *pdev)
+{
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+}
+
+static const struct hc_driver ehci_w90x900_hc_driver = {
+	.description = hcd_name,
+	.product_desc = "Nuvoton w90x900 EHCI Host Controller",
+	.hcd_priv_size = sizeof(struct ehci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq = ehci_irq,
+	.flags = HCD_USB2|HCD_MEMORY,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset = ehci_init,
+	.start = ehci_run,
+
+	.stop = ehci_stop,
+	.shutdown = ehci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue = ehci_urb_enqueue,
+	.urb_dequeue = ehci_urb_dequeue,
+	.endpoint_disable = ehci_endpoint_disable,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number = ehci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data = ehci_hub_status_data,
+	.hub_control = ehci_hub_control,
+#ifdef	CONFIG_PM
+	.bus_suspend = ehci_bus_suspend,
+	.bus_resume = ehci_bus_resume,
+#endif
+	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
+};
+
+static int __devinit ehci_w90x900_probe(struct platform_device *pdev)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	return usb_w90x900_probe(&ehci_w90x900_hc_driver, pdev);
+}
+
+static int __devexit ehci_w90x900_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_w90x900_remove(hcd, pdev);
+
+	return 0;
+}
+
+static struct platform_driver ehci_hcd_w90x900_driver = {
+	.probe  = ehci_w90x900_probe,
+	.remove = __devexit_p(ehci_w90x900_remove),
+	.driver = {
+		.name = "w90x900-ehci",
+		.owner = THIS_MODULE,
+	},
+};
+
+MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
+MODULE_DESCRIPTION("w90p910 usb ehci driver!");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:w90p910-ehci");
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 2bfff30f4704..064e76821ff5 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -37,7 +37,7 @@ typedef __u16 __bitwise __hc16;
 #define __hc16	__le16
 #endif
 
-/* statistics can be kept for for tuning/monitoring */
+/* statistics can be kept for tuning/monitoring */
 struct ehci_stats {
 	/* irq usage */
 	unsigned long		normal;
@@ -126,6 +126,7 @@ struct ehci_hcd {			/* one per controller */
 	unsigned		big_endian_mmio:1;
 	unsigned		big_endian_desc:1;
 	unsigned		has_amcc_usb23:1;
+	unsigned		need_io_watchdog:1;
 
 	/* required for usb32 quirk */
 	#define OHCI_CTRL_HCFS          (3 << 6)
@@ -135,6 +136,7 @@ struct ehci_hcd {			/* one per controller */
 	#define OHCI_HCCTRL_OFFSET      0x4
 	#define OHCI_HCCTRL_LEN         0x4
 	__hc32			*ohci_hcctrl_reg;
+	unsigned		has_hostpc:1;
 
 	u8			sbrn;		/* packed release number */
 
@@ -298,8 +300,8 @@ union ehci_shadow {
  * These appear in both the async and (for interrupt) periodic schedules.
  */
 
-struct ehci_qh {
-	/* first part defined by EHCI spec */
+/* first part defined by EHCI spec */
+struct ehci_qh_hw {
 	__hc32			hw_next;	/* see EHCI 3.6.1 */
 	__hc32			hw_info1;       /* see EHCI 3.6.2 */
 #define	QH_HEAD		0x00008000
@@ -317,7 +319,10 @@ struct ehci_qh {
 	__hc32			hw_token;
 	__hc32			hw_buf [5];
 	__hc32			hw_buf_hi [5];
+} __attribute__ ((aligned(32)));
 
+struct ehci_qh {
+	struct ehci_qh_hw	*hw;
 	/* the rest is HCD-private */
 	dma_addr_t		qh_dma;		/* address of qh */
 	union ehci_shadow	qh_next;	/* ptr to qh; or periodic */
@@ -336,6 +341,7 @@ struct ehci_qh {
 	u32			refcount;
 	unsigned		stamp;
 
+	u8			needs_rescan;	/* Dequeue during giveback */
 	u8			qh_state;
 #define	QH_STATE_LINKED		1		/* HC sees this */
 #define	QH_STATE_UNLINK		2		/* HC may still see this */
@@ -357,7 +363,7 @@ struct ehci_qh {
 
 	struct usb_device	*dev;		/* access to TT */
 	unsigned		clearing_tt:1;	/* Clear-TT-Buf in progress */
-} __attribute__ ((aligned (32)));
+};
 
 /*-------------------------------------------------------------------------*/
 
@@ -544,7 +550,7 @@ static inline unsigned int
 ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc)
 {
 	if (ehci_is_TDI(ehci)) {
-		switch ((portsc>>26)&3) {
+		switch ((portsc >> (ehci->has_hostpc ? 25 : 26)) & 3) {
 		case 0:
 			return 0;
 		case 1:
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
new file mode 100644
index 000000000000..e35d82808bab
--- /dev/null
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -0,0 +1,2909 @@
+/*
+ * ISP1362 HCD (Host Controller Driver) for USB.
+ *
+ * Copyright (C) 2005 Lothar Wassmann <LW@KARO-electronics.de>
+ *
+ * Derived from the SL811 HCD, rewritten for ISP116x.
+ * Copyright (C) 2005 Olav Kongas <ok@artecdesign.ee>
+ *
+ * Portions:
+ * Copyright (C) 2004 Psion Teklogix (for NetBook PRO)
+ * Copyright (C) 2004 David Brownell
+ */
+
+/*
+ * The ISP1362 chip requires a large delay (300ns and 462ns) between
+ * accesses to the address and data register.
+ * The following timing options exist:
+ *
+ * 1. Configure your memory controller to add such delays if it can (the best)
+ * 2. Implement platform-specific delay function possibly
+ *    combined with configuring the memory controller; see
+ *    include/linux/usb_isp1362.h for more info.
+ * 3. Use ndelay (easiest, poorest).
+ *
+ * Use the corresponding macros USE_PLATFORM_DELAY and USE_NDELAY in the
+ * platform specific section of isp1362.h to select the appropriate variant.
+ *
+ * Also note that according to the Philips "ISP1362 Errata" document
+ * Rev 1.00 from 27 May data corruption may occur when the #WR signal
+ * is reasserted (even with #CS deasserted) within 132ns after a
+ * write cycle to any controller register. If the hardware doesn't
+ * implement the recommended fix (gating the #WR with #CS) software
+ * must ensure that no further write cycle (not necessarily to the chip!)
+ * is issued by the CPU within this interval.
+
+ * For PXA25x this can be ensured by using VLIO with the maximum
+ * recovery time (MSCx = 0x7f8c) with a memory clock of 99.53 MHz.
+ */
+
+#ifdef CONFIG_USB_DEBUG
+# define ISP1362_DEBUG
+#else
+# undef ISP1362_DEBUG
+#endif
+
+/*
+ * The PXA255 UDC apparently doesn't handle GET_STATUS, GET_CONFIG and
+ * GET_INTERFACE requests correctly when the SETUP and DATA stages of the
+ * requests are carried out in separate frames. This will delay any SETUP
+ * packets until the start of the next frame so that this situation is
+ * unlikely to occur (and makes usbtest happy running with a PXA255 target
+ * device).
+ */
+#undef BUGGY_PXA2XX_UDC_USBTEST
+
+#undef PTD_TRACE
+#undef URB_TRACE
+#undef VERBOSE
+#undef REGISTERS
+
+/* This enables a memory test on the ISP1362 chip memory to make sure the
+ * chip access timing is correct.
+ */
+#undef CHIP_BUFFER_TEST
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/usb.h>
+#include <linux/usb/isp1362.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+
+static int dbg_level;
+#ifdef ISP1362_DEBUG
+module_param(dbg_level, int, 0644);
+#else
+module_param(dbg_level, int, 0);
+#define	STUB_DEBUG_FILE
+#endif
+
+#include "../core/hcd.h"
+#include "../core/usb.h"
+#include "isp1362.h"
+
+
+#define DRIVER_VERSION	"2005-04-04"
+#define DRIVER_DESC	"ISP1362 USB Host Controller Driver"
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+static const char hcd_name[] = "isp1362-hcd";
+
+static void isp1362_hc_stop(struct usb_hcd *hcd);
+static int isp1362_hc_start(struct usb_hcd *hcd);
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * When called from the interrupthandler only isp1362_hcd->irqenb is modified,
+ * since the interrupt handler will write isp1362_hcd->irqenb to HCuPINT upon
+ * completion.
+ * We don't need a 'disable' counterpart, since interrupts will be disabled
+ * only by the interrupt handler.
+ */
+static inline void isp1362_enable_int(struct isp1362_hcd *isp1362_hcd, u16 mask)
+{
+	if ((isp1362_hcd->irqenb | mask) == isp1362_hcd->irqenb)
+		return;
+	if (mask & ~isp1362_hcd->irqenb)
+		isp1362_write_reg16(isp1362_hcd, HCuPINT, mask & ~isp1362_hcd->irqenb);
+	isp1362_hcd->irqenb |= mask;
+	if (isp1362_hcd->irq_active)
+		return;
+	isp1362_write_reg16(isp1362_hcd, HCuPINTENB, isp1362_hcd->irqenb);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static inline struct isp1362_ep_queue *get_ptd_queue(struct isp1362_hcd *isp1362_hcd,
+						     u16 offset)
+{
+	struct isp1362_ep_queue *epq = NULL;
+
+	if (offset < isp1362_hcd->istl_queue[1].buf_start)
+		epq = &isp1362_hcd->istl_queue[0];
+	else if (offset < isp1362_hcd->intl_queue.buf_start)
+		epq = &isp1362_hcd->istl_queue[1];
+	else if (offset < isp1362_hcd->atl_queue.buf_start)
+		epq = &isp1362_hcd->intl_queue;
+	else if (offset < isp1362_hcd->atl_queue.buf_start +
+		   isp1362_hcd->atl_queue.buf_size)
+		epq = &isp1362_hcd->atl_queue;
+
+	if (epq)
+		DBG(1, "%s: PTD $%04x is on %s queue\n", __func__, offset, epq->name);
+	else
+		pr_warning("%s: invalid PTD $%04x\n", __func__, offset);
+
+	return epq;
+}
+
+static inline int get_ptd_offset(struct isp1362_ep_queue *epq, u8 index)
+{
+	int offset;
+
+	if (index * epq->blk_size > epq->buf_size) {
+		pr_warning("%s: Bad %s index %d(%d)\n", __func__, epq->name, index,
+		     epq->buf_size / epq->blk_size);
+		return -EINVAL;
+	}
+	offset = epq->buf_start + index * epq->blk_size;
+	DBG(3, "%s: %s PTD[%02x] # %04x\n", __func__, epq->name, index, offset);
+
+	return offset;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static inline u16 max_transfer_size(struct isp1362_ep_queue *epq, size_t size,
+				    int mps)
+{
+	u16 xfer_size = min_t(size_t, MAX_XFER_SIZE, size);
+
+	xfer_size = min_t(size_t, xfer_size, epq->buf_avail * epq->blk_size - PTD_HEADER_SIZE);
+	if (xfer_size < size && xfer_size % mps)
+		xfer_size -= xfer_size % mps;
+
+	return xfer_size;
+}
+
+static int claim_ptd_buffers(struct isp1362_ep_queue *epq,
+			     struct isp1362_ep *ep, u16 len)
+{
+	int ptd_offset = -EINVAL;
+	int index;
+	int num_ptds = ((len + PTD_HEADER_SIZE - 1) / epq->blk_size) + 1;
+	int found = -1;
+	int last = -1;
+
+	BUG_ON(len > epq->buf_size);
+
+	if (!epq->buf_avail)
+		return -ENOMEM;
+
+	if (ep->num_ptds)
+		pr_err("%s: %s len %d/%d num_ptds %d buf_map %08lx skip_map %08lx\n", __func__,
+		    epq->name, len, epq->blk_size, num_ptds, epq->buf_map, epq->skip_map);
+	BUG_ON(ep->num_ptds != 0);
+
+	for (index = 0; index <= epq->buf_count - num_ptds; index++) {
+		if (test_bit(index, &epq->buf_map))
+			continue;
+		found = index;
+		for (last = index + 1; last < index + num_ptds; last++) {
+			if (test_bit(last, &epq->buf_map)) {
+				found = -1;
+				break;
+			}
+		}
+		if (found >= 0)
+			break;
+	}
+	if (found < 0)
+		return -EOVERFLOW;
+
+	DBG(1, "%s: Found %d PTDs[%d] for %d/%d byte\n", __func__,
+	    num_ptds, found, len, (int)(epq->blk_size - PTD_HEADER_SIZE));
+	ptd_offset = get_ptd_offset(epq, found);
+	WARN_ON(ptd_offset < 0);
+	ep->ptd_offset = ptd_offset;
+	ep->num_ptds += num_ptds;
+	epq->buf_avail -= num_ptds;
+	BUG_ON(epq->buf_avail > epq->buf_count);
+	ep->ptd_index = found;
+	for (index = found; index < last; index++)
+		__set_bit(index, &epq->buf_map);
+	DBG(1, "%s: Done %s PTD[%d] $%04x, avail %d count %d claimed %d %08lx:%08lx\n",
+	    __func__, epq->name, ep->ptd_index, ep->ptd_offset,
+	    epq->buf_avail, epq->buf_count, num_ptds, epq->buf_map, epq->skip_map);
+
+	return found;
+}
+
+static inline void release_ptd_buffers(struct isp1362_ep_queue *epq, struct isp1362_ep *ep)
+{
+	int index = ep->ptd_index;
+	int last = ep->ptd_index + ep->num_ptds;
+
+	if (last > epq->buf_count)
+		pr_err("%s: ep %p req %d len %d %s PTD[%d] $%04x num_ptds %d buf_count %d buf_avail %d buf_map %08lx skip_map %08lx\n",
+		    __func__, ep, ep->num_req, ep->length, epq->name, ep->ptd_index,
+		    ep->ptd_offset, ep->num_ptds, epq->buf_count, epq->buf_avail,
+		    epq->buf_map, epq->skip_map);
+	BUG_ON(last > epq->buf_count);
+
+	for (; index < last; index++) {
+		__clear_bit(index, &epq->buf_map);
+		__set_bit(index, &epq->skip_map);
+	}
+	epq->buf_avail += ep->num_ptds;
+	epq->ptd_count--;
+
+	BUG_ON(epq->buf_avail > epq->buf_count);
+	BUG_ON(epq->ptd_count > epq->buf_count);
+
+	DBG(1, "%s: Done %s PTDs $%04x released %d avail %d count %d\n",
+	    __func__, epq->name,
+	    ep->ptd_offset, ep->num_ptds, epq->buf_avail, epq->buf_count);
+	DBG(1, "%s: buf_map %08lx skip_map %08lx\n", __func__,
+	    epq->buf_map, epq->skip_map);
+
+	ep->num_ptds = 0;
+	ep->ptd_offset = -EINVAL;
+	ep->ptd_index = -EINVAL;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+  Set up PTD's.
+*/
+static void prepare_ptd(struct isp1362_hcd *isp1362_hcd, struct urb *urb,
+			struct isp1362_ep *ep, struct isp1362_ep_queue *epq,
+			u16 fno)
+{
+	struct ptd *ptd;
+	int toggle;
+	int dir;
+	u16 len;
+	size_t buf_len = urb->transfer_buffer_length - urb->actual_length;
+
+	DBG(3, "%s: %s ep %p\n", __func__, epq->name, ep);
+
+	ptd = &ep->ptd;
+
+	ep->data = (unsigned char *)urb->transfer_buffer + urb->actual_length;
+
+	switch (ep->nextpid) {
+	case USB_PID_IN:
+		toggle = usb_gettoggle(urb->dev, ep->epnum, 0);
+		dir = PTD_DIR_IN;
+		if (usb_pipecontrol(urb->pipe)) {
+			len = min_t(size_t, ep->maxpacket, buf_len);
+		} else if (usb_pipeisoc(urb->pipe)) {
+			len = min_t(size_t, urb->iso_frame_desc[fno].length, MAX_XFER_SIZE);
+			ep->data = urb->transfer_buffer + urb->iso_frame_desc[fno].offset;
+		} else
+			len = max_transfer_size(epq, buf_len, ep->maxpacket);
+		DBG(1, "%s: IN    len %d/%d/%d from URB\n", __func__, len, ep->maxpacket,
+		    (int)buf_len);
+		break;
+	case USB_PID_OUT:
+		toggle = usb_gettoggle(urb->dev, ep->epnum, 1);
+		dir = PTD_DIR_OUT;
+		if (usb_pipecontrol(urb->pipe))
+			len = min_t(size_t, ep->maxpacket, buf_len);
+		else if (usb_pipeisoc(urb->pipe))
+			len = min_t(size_t, urb->iso_frame_desc[0].length, MAX_XFER_SIZE);
+		else
+			len = max_transfer_size(epq, buf_len, ep->maxpacket);
+		if (len == 0)
+			pr_info("%s: Sending ZERO packet: %d\n", __func__,
+			     urb->transfer_flags & URB_ZERO_PACKET);
+		DBG(1, "%s: OUT   len %d/%d/%d from URB\n", __func__, len, ep->maxpacket,
+		    (int)buf_len);
+		break;
+	case USB_PID_SETUP:
+		toggle = 0;
+		dir = PTD_DIR_SETUP;
+		len = sizeof(struct usb_ctrlrequest);
+		DBG(1, "%s: SETUP len %d\n", __func__, len);
+		ep->data = urb->setup_packet;
+		break;
+	case USB_PID_ACK:
+		toggle = 1;
+		len = 0;
+		dir = (urb->transfer_buffer_length && usb_pipein(urb->pipe)) ?
+			PTD_DIR_OUT : PTD_DIR_IN;
+		DBG(1, "%s: ACK   len %d\n", __func__, len);
+		break;
+	default:
+		toggle = dir = len = 0;
+		pr_err("%s@%d: ep->nextpid %02x\n", __func__, __LINE__, ep->nextpid);
+		BUG_ON(1);
+	}
+
+	ep->length = len;
+	if (!len)
+		ep->data = NULL;
+
+	ptd->count = PTD_CC_MSK | PTD_ACTIVE_MSK | PTD_TOGGLE(toggle);
+	ptd->mps = PTD_MPS(ep->maxpacket) | PTD_SPD(urb->dev->speed == USB_SPEED_LOW) |
+		PTD_EP(ep->epnum);
+	ptd->len = PTD_LEN(len) | PTD_DIR(dir);
+	ptd->faddr = PTD_FA(usb_pipedevice(urb->pipe));
+
+	if (usb_pipeint(urb->pipe)) {
+		ptd->faddr |= PTD_SF_INT(ep->branch);
+		ptd->faddr |= PTD_PR(ep->interval ? __ffs(ep->interval) : 0);
+	}
+	if (usb_pipeisoc(urb->pipe))
+		ptd->faddr |= PTD_SF_ISO(fno);
+
+	DBG(1, "%s: Finished\n", __func__);
+}
+
+static void isp1362_write_ptd(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep *ep,
+			      struct isp1362_ep_queue *epq)
+{
+	struct ptd *ptd = &ep->ptd;
+	int len = PTD_GET_DIR(ptd) == PTD_DIR_IN ? 0 : ep->length;
+
+	_BUG_ON(ep->ptd_offset < 0);
+
+	prefetch(ptd);
+	isp1362_write_buffer(isp1362_hcd, ptd, ep->ptd_offset, PTD_HEADER_SIZE);
+	if (len)
+		isp1362_write_buffer(isp1362_hcd, ep->data,
+				     ep->ptd_offset + PTD_HEADER_SIZE, len);
+
+	dump_ptd(ptd);
+	dump_ptd_out_data(ptd, ep->data);
+}
+
+static void isp1362_read_ptd(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep *ep,
+			     struct isp1362_ep_queue *epq)
+{
+	struct ptd *ptd = &ep->ptd;
+	int act_len;
+
+	WARN_ON(list_empty(&ep->active));
+	BUG_ON(ep->ptd_offset < 0);
+
+	list_del_init(&ep->active);
+	DBG(1, "%s: ep %p removed from active list %p\n", __func__, ep, &epq->active);
+
+	prefetchw(ptd);
+	isp1362_read_buffer(isp1362_hcd, ptd, ep->ptd_offset, PTD_HEADER_SIZE);
+	dump_ptd(ptd);
+	act_len = PTD_GET_COUNT(ptd);
+	if (PTD_GET_DIR(ptd) != PTD_DIR_IN || act_len == 0)
+		return;
+	if (act_len > ep->length)
+		pr_err("%s: ep %p PTD $%04x act_len %d ep->length %d\n", __func__, ep,
+			 ep->ptd_offset, act_len, ep->length);
+	BUG_ON(act_len > ep->length);
+	/* Only transfer the amount of data that has actually been overwritten
+	 * in the chip buffer. We don't want any data that doesn't belong to the
+	 * transfer to leak out of the chip to the callers transfer buffer!
+	 */
+	prefetchw(ep->data);
+	isp1362_read_buffer(isp1362_hcd, ep->data,
+			    ep->ptd_offset + PTD_HEADER_SIZE, act_len);
+	dump_ptd_in_data(ptd, ep->data);
+}
+
+/*
+ * INT PTDs will stay in the chip until data is available.
+ * This function will remove a PTD from the chip when the URB is dequeued.
+ * Must be called with the spinlock held and IRQs disabled
+ */
+static void remove_ptd(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep *ep)
+
+{
+	int index;
+	struct isp1362_ep_queue *epq;
+
+	DBG(1, "%s: ep %p PTD[%d] $%04x\n", __func__, ep, ep->ptd_index, ep->ptd_offset);
+	BUG_ON(ep->ptd_offset < 0);
+
+	epq = get_ptd_queue(isp1362_hcd, ep->ptd_offset);
+	BUG_ON(!epq);
+
+	/* put ep in remove_list for cleanup */
+	WARN_ON(!list_empty(&ep->remove_list));
+	list_add_tail(&ep->remove_list, &isp1362_hcd->remove_list);
+	/* let SOF interrupt handle the cleanup */
+	isp1362_enable_int(isp1362_hcd, HCuPINT_SOF);
+
+	index = ep->ptd_index;
+	if (index < 0)
+		/* ISO queues don't have SKIP registers */
+		return;
+
+	DBG(1, "%s: Disabling PTD[%02x] $%04x %08lx|%08x\n", __func__,
+	    index, ep->ptd_offset, epq->skip_map, 1 << index);
+
+	/* prevent further processing of PTD (will be effective after next SOF) */
+	epq->skip_map |= 1 << index;
+	if (epq == &isp1362_hcd->atl_queue) {
+		DBG(2, "%s: ATLSKIP = %08x -> %08lx\n", __func__,
+		    isp1362_read_reg32(isp1362_hcd, HCATLSKIP), epq->skip_map);
+		isp1362_write_reg32(isp1362_hcd, HCATLSKIP, epq->skip_map);
+		if (~epq->skip_map == 0)
+			isp1362_clr_mask16(isp1362_hcd, HCBUFSTAT, HCBUFSTAT_ATL_ACTIVE);
+	} else if (epq == &isp1362_hcd->intl_queue) {
+		DBG(2, "%s: INTLSKIP = %08x -> %08lx\n", __func__,
+		    isp1362_read_reg32(isp1362_hcd, HCINTLSKIP), epq->skip_map);
+		isp1362_write_reg32(isp1362_hcd, HCINTLSKIP, epq->skip_map);
+		if (~epq->skip_map == 0)
+			isp1362_clr_mask16(isp1362_hcd, HCBUFSTAT, HCBUFSTAT_INTL_ACTIVE);
+	}
+}
+
+/*
+  Take done or failed requests out of schedule. Give back
+  processed urbs.
+*/
+static void finish_request(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep *ep,
+			   struct urb *urb, int status)
+     __releases(isp1362_hcd->lock)
+     __acquires(isp1362_hcd->lock)
+{
+	urb->hcpriv = NULL;
+	ep->error_count = 0;
+
+	if (usb_pipecontrol(urb->pipe))
+		ep->nextpid = USB_PID_SETUP;
+
+	URB_DBG("%s: req %d FA %d ep%d%s %s: len %d/%d %s stat %d\n", __func__,
+		ep->num_req, usb_pipedevice(urb->pipe),
+		usb_pipeendpoint(urb->pipe),
+		!usb_pipein(urb->pipe) ? "out" : "in",
+		usb_pipecontrol(urb->pipe) ? "ctrl" :
+			usb_pipeint(urb->pipe) ? "int" :
+			usb_pipebulk(urb->pipe) ? "bulk" :
+			"iso",
+		urb->actual_length, urb->transfer_buffer_length,
+		!(urb->transfer_flags & URB_SHORT_NOT_OK) ?
+		"short_ok" : "", urb->status);
+
+
+	usb_hcd_unlink_urb_from_ep(isp1362_hcd_to_hcd(isp1362_hcd), urb);
+	spin_unlock(&isp1362_hcd->lock);
+	usb_hcd_giveback_urb(isp1362_hcd_to_hcd(isp1362_hcd), urb, status);
+	spin_lock(&isp1362_hcd->lock);
+
+	/* take idle endpoints out of the schedule right away */
+	if (!list_empty(&ep->hep->urb_list))
+		return;
+
+	/* async deschedule */
+	if (!list_empty(&ep->schedule)) {
+		list_del_init(&ep->schedule);
+		return;
+	}
+
+
+	if (ep->interval) {
+		/* periodic deschedule */
+		DBG(1, "deschedule qh%d/%p branch %d load %d bandwidth %d -> %d\n", ep->interval,
+		    ep, ep->branch, ep->load,
+		    isp1362_hcd->load[ep->branch],
+		    isp1362_hcd->load[ep->branch] - ep->load);
+		isp1362_hcd->load[ep->branch] -= ep->load;
+		ep->branch = PERIODIC_SIZE;
+	}
+}
+
+/*
+ * Analyze transfer results, handle partial transfers and errors
+*/
+static void postproc_ep(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep *ep)
+{
+	struct urb *urb = get_urb(ep);
+	struct usb_device *udev;
+	struct ptd *ptd;
+	int short_ok;
+	u16 len;
+	int urbstat = -EINPROGRESS;
+	u8 cc;
+
+	DBG(2, "%s: ep %p req %d\n", __func__, ep, ep->num_req);
+
+	udev = urb->dev;
+	ptd = &ep->ptd;
+	cc = PTD_GET_CC(ptd);
+	if (cc == PTD_NOTACCESSED) {
+		pr_err("%s: req %d PTD %p Untouched by ISP1362\n", __func__,
+		    ep->num_req, ptd);
+		cc = PTD_DEVNOTRESP;
+	}
+
+	short_ok = !(urb->transfer_flags & URB_SHORT_NOT_OK);
+	len = urb->transfer_buffer_length - urb->actual_length;
+
+	/* Data underrun is special. For allowed underrun
+	   we clear the error and continue as normal. For
+	   forbidden underrun we finish the DATA stage
+	   immediately while for control transfer,
+	   we do a STATUS stage.
+	*/
+	if (cc == PTD_DATAUNDERRUN) {
+		if (short_ok) {
+			DBG(1, "%s: req %d Allowed data underrun short_%sok %d/%d/%d byte\n",
+			    __func__, ep->num_req, short_ok ? "" : "not_",
+			    PTD_GET_COUNT(ptd), ep->maxpacket, len);
+			cc = PTD_CC_NOERROR;
+			urbstat = 0;
+		} else {
+			DBG(1, "%s: req %d Data Underrun %s nextpid %02x short_%sok %d/%d/%d byte\n",
+			    __func__, ep->num_req,
+			    usb_pipein(urb->pipe) ? "IN" : "OUT", ep->nextpid,
+			    short_ok ? "" : "not_",
+			    PTD_GET_COUNT(ptd), ep->maxpacket, len);
+			if (usb_pipecontrol(urb->pipe)) {
+				ep->nextpid = USB_PID_ACK;
+				/* save the data underrun error code for later and
+				 * procede with the status stage
+				 */
+				urb->actual_length += PTD_GET_COUNT(ptd);
+				BUG_ON(urb->actual_length > urb->transfer_buffer_length);
+
+				if (urb->status == -EINPROGRESS)
+					urb->status = cc_to_error[PTD_DATAUNDERRUN];
+			} else {
+				usb_settoggle(udev, ep->epnum, ep->nextpid == USB_PID_OUT,
+					      PTD_GET_TOGGLE(ptd));
+				urbstat = cc_to_error[PTD_DATAUNDERRUN];
+			}
+			goto out;
+		}
+	}
+
+	if (cc != PTD_CC_NOERROR) {
+		if (++ep->error_count >= 3 || cc == PTD_CC_STALL || cc == PTD_DATAOVERRUN) {
+			urbstat = cc_to_error[cc];
+			DBG(1, "%s: req %d nextpid %02x, status %d, error %d, error_count %d\n",
+			    __func__, ep->num_req, ep->nextpid, urbstat, cc,
+			    ep->error_count);
+		}
+		goto out;
+	}
+
+	switch (ep->nextpid) {
+	case USB_PID_OUT:
+		if (PTD_GET_COUNT(ptd) != ep->length)
+			pr_err("%s: count=%d len=%d\n", __func__,
+			   PTD_GET_COUNT(ptd), ep->length);
+		BUG_ON(PTD_GET_COUNT(ptd) != ep->length);
+		urb->actual_length += ep->length;
+		BUG_ON(urb->actual_length > urb->transfer_buffer_length);
+		usb_settoggle(udev, ep->epnum, 1, PTD_GET_TOGGLE(ptd));
+		if (urb->actual_length == urb->transfer_buffer_length) {
+			DBG(3, "%s: req %d xfer complete %d/%d status %d -> 0\n", __func__,
+			    ep->num_req, len, ep->maxpacket, urbstat);
+			if (usb_pipecontrol(urb->pipe)) {
+				DBG(3, "%s: req %d %s Wait for ACK\n", __func__,
+				    ep->num_req,
+				    usb_pipein(urb->pipe) ? "IN" : "OUT");
+				ep->nextpid = USB_PID_ACK;
+			} else {
+				if (len % ep->maxpacket ||
+				    !(urb->transfer_flags & URB_ZERO_PACKET)) {
+					urbstat = 0;
+					DBG(3, "%s: req %d URB %s status %d count %d/%d/%d\n",
+					    __func__, ep->num_req, usb_pipein(urb->pipe) ? "IN" : "OUT",
+					    urbstat, len, ep->maxpacket, urb->actual_length);
+				}
+			}
+		}
+		break;
+	case USB_PID_IN:
+		len = PTD_GET_COUNT(ptd);
+		BUG_ON(len > ep->length);
+		urb->actual_length += len;
+		BUG_ON(urb->actual_length > urb->transfer_buffer_length);
+		usb_settoggle(udev, ep->epnum, 0, PTD_GET_TOGGLE(ptd));
+		/* if transfer completed or (allowed) data underrun */
+		if ((urb->transfer_buffer_length == urb->actual_length) ||
+		    len % ep->maxpacket) {
+			DBG(3, "%s: req %d xfer complete %d/%d status %d -> 0\n", __func__,
+			    ep->num_req, len, ep->maxpacket, urbstat);
+			if (usb_pipecontrol(urb->pipe)) {
+				DBG(3, "%s: req %d %s Wait for ACK\n", __func__,
+				    ep->num_req,
+				    usb_pipein(urb->pipe) ? "IN" : "OUT");
+				ep->nextpid = USB_PID_ACK;
+			} else {
+				urbstat = 0;
+				DBG(3, "%s: req %d URB %s status %d count %d/%d/%d\n",
+				    __func__, ep->num_req, usb_pipein(urb->pipe) ? "IN" : "OUT",
+				    urbstat, len, ep->maxpacket, urb->actual_length);
+			}
+		}
+		break;
+	case USB_PID_SETUP:
+		if (urb->transfer_buffer_length == urb->actual_length) {
+			ep->nextpid = USB_PID_ACK;
+		} else if (usb_pipeout(urb->pipe)) {
+			usb_settoggle(udev, 0, 1, 1);
+			ep->nextpid = USB_PID_OUT;
+		} else {
+			usb_settoggle(udev, 0, 0, 1);
+			ep->nextpid = USB_PID_IN;
+		}
+		break;
+	case USB_PID_ACK:
+		DBG(3, "%s: req %d got ACK %d -> 0\n", __func__, ep->num_req,
+		    urbstat);
+		WARN_ON(urbstat != -EINPROGRESS);
+		urbstat = 0;
+		ep->nextpid = 0;
+		break;
+	default:
+		BUG_ON(1);
+	}
+
+ out:
+	if (urbstat != -EINPROGRESS) {
+		DBG(2, "%s: Finishing ep %p req %d urb %p status %d\n", __func__,
+		    ep, ep->num_req, urb, urbstat);
+		finish_request(isp1362_hcd, ep, urb, urbstat);
+	}
+}
+
+static void finish_unlinks(struct isp1362_hcd *isp1362_hcd)
+{
+	struct isp1362_ep *ep;
+	struct isp1362_ep *tmp;
+
+	list_for_each_entry_safe(ep, tmp, &isp1362_hcd->remove_list, remove_list) {
+		struct isp1362_ep_queue *epq =
+			get_ptd_queue(isp1362_hcd, ep->ptd_offset);
+		int index = ep->ptd_index;
+
+		BUG_ON(epq == NULL);
+		if (index >= 0) {
+			DBG(1, "%s: remove PTD[%d] $%04x\n", __func__, index, ep->ptd_offset);
+			BUG_ON(ep->num_ptds == 0);
+			release_ptd_buffers(epq, ep);
+		}
+		if (!list_empty(&ep->hep->urb_list)) {
+			struct urb *urb = get_urb(ep);
+
+			DBG(1, "%s: Finishing req %d ep %p from remove_list\n", __func__,
+			    ep->num_req, ep);
+			finish_request(isp1362_hcd, ep, urb, -ESHUTDOWN);
+		}
+		WARN_ON(list_empty(&ep->active));
+		if (!list_empty(&ep->active)) {
+			list_del_init(&ep->active);
+			DBG(1, "%s: ep %p removed from active list\n", __func__, ep);
+		}
+		list_del_init(&ep->remove_list);
+		DBG(1, "%s: ep %p removed from remove_list\n", __func__, ep);
+	}
+	DBG(1, "%s: Done\n", __func__);
+}
+
+static inline void enable_atl_transfers(struct isp1362_hcd *isp1362_hcd, int count)
+{
+	if (count > 0) {
+		if (count < isp1362_hcd->atl_queue.ptd_count)
+			isp1362_write_reg16(isp1362_hcd, HCATLDTC, count);
+		isp1362_enable_int(isp1362_hcd, HCuPINT_ATL);
+		isp1362_write_reg32(isp1362_hcd, HCATLSKIP, isp1362_hcd->atl_queue.skip_map);
+		isp1362_set_mask16(isp1362_hcd, HCBUFSTAT, HCBUFSTAT_ATL_ACTIVE);
+	} else
+		isp1362_enable_int(isp1362_hcd, HCuPINT_SOF);
+}
+
+static inline void enable_intl_transfers(struct isp1362_hcd *isp1362_hcd)
+{
+	isp1362_enable_int(isp1362_hcd, HCuPINT_INTL);
+	isp1362_set_mask16(isp1362_hcd, HCBUFSTAT, HCBUFSTAT_INTL_ACTIVE);
+	isp1362_write_reg32(isp1362_hcd, HCINTLSKIP, isp1362_hcd->intl_queue.skip_map);
+}
+
+static inline void enable_istl_transfers(struct isp1362_hcd *isp1362_hcd, int flip)
+{
+	isp1362_enable_int(isp1362_hcd, flip ? HCuPINT_ISTL1 : HCuPINT_ISTL0);
+	isp1362_set_mask16(isp1362_hcd, HCBUFSTAT, flip ?
+			   HCBUFSTAT_ISTL1_FULL : HCBUFSTAT_ISTL0_FULL);
+}
+
+static int submit_req(struct isp1362_hcd *isp1362_hcd, struct urb *urb,
+		      struct isp1362_ep *ep, struct isp1362_ep_queue *epq)
+{
+	int index = epq->free_ptd;
+
+	prepare_ptd(isp1362_hcd, urb, ep, epq, 0);
+	index = claim_ptd_buffers(epq, ep, ep->length);
+	if (index == -ENOMEM) {
+		DBG(1, "%s: req %d No free %s PTD available: %d, %08lx:%08lx\n", __func__,
+		    ep->num_req, epq->name, ep->num_ptds, epq->buf_map, epq->skip_map);
+		return index;
+	} else if (index == -EOVERFLOW) {
+		DBG(1, "%s: req %d Not enough space for %d byte %s PTD %d %08lx:%08lx\n",
+		    __func__, ep->num_req, ep->length, epq->name, ep->num_ptds,
+		    epq->buf_map, epq->skip_map);
+		return index;
+	} else
+		BUG_ON(index < 0);
+	list_add_tail(&ep->active, &epq->active);
+	DBG(1, "%s: ep %p req %d len %d added to active list %p\n", __func__,
+	    ep, ep->num_req, ep->length, &epq->active);
+	DBG(1, "%s: Submitting %s PTD $%04x for ep %p req %d\n", __func__, epq->name,
+	    ep->ptd_offset, ep, ep->num_req);
+	isp1362_write_ptd(isp1362_hcd, ep, epq);
+	__clear_bit(ep->ptd_index, &epq->skip_map);
+
+	return 0;
+}
+
+static void start_atl_transfers(struct isp1362_hcd *isp1362_hcd)
+{
+	int ptd_count = 0;
+	struct isp1362_ep_queue *epq = &isp1362_hcd->atl_queue;
+	struct isp1362_ep *ep;
+	int defer = 0;
+
+	if (atomic_read(&epq->finishing)) {
+		DBG(1, "%s: finish_transfers is active for %s\n", __func__, epq->name);
+		return;
+	}
+
+	list_for_each_entry(ep, &isp1362_hcd->async, schedule) {
+		struct urb *urb = get_urb(ep);
+		int ret;
+
+		if (!list_empty(&ep->active)) {
+			DBG(2, "%s: Skipping active %s ep %p\n", __func__, epq->name, ep);
+			continue;
+		}
+
+		DBG(1, "%s: Processing %s ep %p req %d\n", __func__, epq->name,
+		    ep, ep->num_req);
+
+		ret = submit_req(isp1362_hcd, urb, ep, epq);
+		if (ret == -ENOMEM) {
+			defer = 1;
+			break;
+		} else if (ret == -EOVERFLOW) {
+			defer = 1;
+			continue;
+		}
+#ifdef BUGGY_PXA2XX_UDC_USBTEST
+		defer = ep->nextpid == USB_PID_SETUP;
+#endif
+		ptd_count++;
+	}
+
+	/* Avoid starving of endpoints */
+	if (isp1362_hcd->async.next != isp1362_hcd->async.prev) {
+		DBG(2, "%s: Cycling ASYNC schedule %d\n", __func__, ptd_count);
+		list_move(&isp1362_hcd->async, isp1362_hcd->async.next);
+	}
+	if (ptd_count || defer)
+		enable_atl_transfers(isp1362_hcd, defer ? 0 : ptd_count);
+
+	epq->ptd_count += ptd_count;
+	if (epq->ptd_count > epq->stat_maxptds) {
+		epq->stat_maxptds = epq->ptd_count;
+		DBG(0, "%s: max_ptds: %d\n", __func__, epq->stat_maxptds);
+	}
+}
+
+static void start_intl_transfers(struct isp1362_hcd *isp1362_hcd)
+{
+	int ptd_count = 0;
+	struct isp1362_ep_queue *epq = &isp1362_hcd->intl_queue;
+	struct isp1362_ep *ep;
+
+	if (atomic_read(&epq->finishing)) {
+		DBG(1, "%s: finish_transfers is active for %s\n", __func__, epq->name);
+		return;
+	}
+
+	list_for_each_entry(ep, &isp1362_hcd->periodic, schedule) {
+		struct urb *urb = get_urb(ep);
+		int ret;
+
+		if (!list_empty(&ep->active)) {
+			DBG(1, "%s: Skipping active %s ep %p\n", __func__,
+			    epq->name, ep);
+			continue;
+		}
+
+		DBG(1, "%s: Processing %s ep %p req %d\n", __func__,
+		    epq->name, ep, ep->num_req);
+		ret = submit_req(isp1362_hcd, urb, ep, epq);
+		if (ret == -ENOMEM)
+			break;
+		else if (ret == -EOVERFLOW)
+			continue;
+		ptd_count++;
+	}
+
+	if (ptd_count) {
+		static int last_count;
+
+		if (ptd_count != last_count) {
+			DBG(0, "%s: ptd_count: %d\n", __func__, ptd_count);
+			last_count = ptd_count;
+		}
+		enable_intl_transfers(isp1362_hcd);
+	}
+
+	epq->ptd_count += ptd_count;
+	if (epq->ptd_count > epq->stat_maxptds)
+		epq->stat_maxptds = epq->ptd_count;
+}
+
+static inline int next_ptd(struct isp1362_ep_queue *epq, struct isp1362_ep *ep)
+{
+	u16 ptd_offset = ep->ptd_offset;
+	int num_ptds = (ep->length + PTD_HEADER_SIZE + (epq->blk_size - 1)) / epq->blk_size;
+
+	DBG(2, "%s: PTD offset $%04x + %04x => %d * %04x -> $%04x\n", __func__, ptd_offset,
+	    ep->length, num_ptds, epq->blk_size, ptd_offset + num_ptds * epq->blk_size);
+
+	ptd_offset += num_ptds * epq->blk_size;
+	if (ptd_offset < epq->buf_start + epq->buf_size)
+		return ptd_offset;
+	else
+		return -ENOMEM;
+}
+
+static void start_iso_transfers(struct isp1362_hcd *isp1362_hcd)
+{
+	int ptd_count = 0;
+	int flip = isp1362_hcd->istl_flip;
+	struct isp1362_ep_queue *epq;
+	int ptd_offset;
+	struct isp1362_ep *ep;
+	struct isp1362_ep *tmp;
+	u16 fno = isp1362_read_reg32(isp1362_hcd, HCFMNUM);
+
+ fill2:
+	epq = &isp1362_hcd->istl_queue[flip];
+	if (atomic_read(&epq->finishing)) {
+		DBG(1, "%s: finish_transfers is active for %s\n", __func__, epq->name);
+		return;
+	}
+
+	if (!list_empty(&epq->active))
+		return;
+
+	ptd_offset = epq->buf_start;
+	list_for_each_entry_safe(ep, tmp, &isp1362_hcd->isoc, schedule) {
+		struct urb *urb = get_urb(ep);
+		s16 diff = fno - (u16)urb->start_frame;
+
+		DBG(1, "%s: Processing %s ep %p\n", __func__, epq->name, ep);
+
+		if (diff > urb->number_of_packets) {
+			/* time frame for this URB has elapsed */
+			finish_request(isp1362_hcd, ep, urb, -EOVERFLOW);
+			continue;
+		} else if (diff < -1) {
+			/* URB is not due in this frame or the next one.
+			 * Comparing with '-1' instead of '0' accounts for double
+			 * buffering in the ISP1362 which enables us to queue the PTD
+			 * one frame ahead of time
+			 */
+		} else if (diff == -1) {
+			/* submit PTD's that are due in the next frame */
+			prepare_ptd(isp1362_hcd, urb, ep, epq, fno);
+			if (ptd_offset + PTD_HEADER_SIZE + ep->length >
+			    epq->buf_start + epq->buf_size) {
+				pr_err("%s: Not enough ISO buffer space for %d byte PTD\n",
+				    __func__, ep->length);
+				continue;
+			}
+			ep->ptd_offset = ptd_offset;
+			list_add_tail(&ep->active, &epq->active);
+
+			ptd_offset = next_ptd(epq, ep);
+			if (ptd_offset < 0) {
+				pr_warning("%s: req %d No more %s PTD buffers available\n", __func__,
+				     ep->num_req, epq->name);
+				break;
+			}
+		}
+	}
+	list_for_each_entry(ep, &epq->active, active) {
+		if (epq->active.next == &ep->active)
+			ep->ptd.mps |= PTD_LAST_MSK;
+		isp1362_write_ptd(isp1362_hcd, ep, epq);
+		ptd_count++;
+	}
+
+	if (ptd_count)
+		enable_istl_transfers(isp1362_hcd, flip);
+
+	epq->ptd_count += ptd_count;
+	if (epq->ptd_count > epq->stat_maxptds)
+		epq->stat_maxptds = epq->ptd_count;
+
+	/* check, whether the second ISTL buffer may also be filled */
+	if (!(isp1362_read_reg16(isp1362_hcd, HCBUFSTAT) &
+	      (flip ? HCBUFSTAT_ISTL0_FULL : HCBUFSTAT_ISTL1_FULL))) {
+		fno++;
+		ptd_count = 0;
+		flip = 1 - flip;
+		goto fill2;
+	}
+}
+
+static void finish_transfers(struct isp1362_hcd *isp1362_hcd, unsigned long done_map,
+			     struct isp1362_ep_queue *epq)
+{
+	struct isp1362_ep *ep;
+	struct isp1362_ep *tmp;
+
+	if (list_empty(&epq->active)) {
+		DBG(1, "%s: Nothing to do for %s queue\n", __func__, epq->name);
+		return;
+	}
+
+	DBG(1, "%s: Finishing %s transfers %08lx\n", __func__, epq->name, done_map);
+
+	atomic_inc(&epq->finishing);
+	list_for_each_entry_safe(ep, tmp, &epq->active, active) {
+		int index = ep->ptd_index;
+
+		DBG(1, "%s: Checking %s PTD[%02x] $%04x\n", __func__, epq->name,
+		    index, ep->ptd_offset);
+
+		BUG_ON(index < 0);
+		if (__test_and_clear_bit(index, &done_map)) {
+			isp1362_read_ptd(isp1362_hcd, ep, epq);
+			epq->free_ptd = index;
+			BUG_ON(ep->num_ptds == 0);
+			release_ptd_buffers(epq, ep);
+
+			DBG(1, "%s: ep %p req %d removed from active list\n", __func__,
+			    ep, ep->num_req);
+			if (!list_empty(&ep->remove_list)) {
+				list_del_init(&ep->remove_list);
+				DBG(1, "%s: ep %p removed from remove list\n", __func__, ep);
+			}
+			DBG(1, "%s: Postprocessing %s ep %p req %d\n", __func__, epq->name,
+			    ep, ep->num_req);
+			postproc_ep(isp1362_hcd, ep);
+		}
+		if (!done_map)
+			break;
+	}
+	if (done_map)
+		pr_warning("%s: done_map not clear: %08lx:%08lx\n", __func__, done_map,
+		     epq->skip_map);
+	atomic_dec(&epq->finishing);
+}
+
+static void finish_iso_transfers(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep_queue *epq)
+{
+	struct isp1362_ep *ep;
+	struct isp1362_ep *tmp;
+
+	if (list_empty(&epq->active)) {
+		DBG(1, "%s: Nothing to do for %s queue\n", __func__, epq->name);
+		return;
+	}
+
+	DBG(1, "%s: Finishing %s transfers\n", __func__, epq->name);
+
+	atomic_inc(&epq->finishing);
+	list_for_each_entry_safe(ep, tmp, &epq->active, active) {
+		DBG(1, "%s: Checking PTD $%04x\n", __func__, ep->ptd_offset);
+
+		isp1362_read_ptd(isp1362_hcd, ep, epq);
+		DBG(1, "%s: Postprocessing %s ep %p\n", __func__, epq->name, ep);
+		postproc_ep(isp1362_hcd, ep);
+	}
+	WARN_ON(epq->blk_size != 0);
+	atomic_dec(&epq->finishing);
+}
+
+static irqreturn_t isp1362_irq(struct usb_hcd *hcd)
+{
+	int handled = 0;
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	u16 irqstat;
+	u16 svc_mask;
+
+	spin_lock(&isp1362_hcd->lock);
+
+	BUG_ON(isp1362_hcd->irq_active++);
+
+	isp1362_write_reg16(isp1362_hcd, HCuPINTENB, 0);
+
+	irqstat = isp1362_read_reg16(isp1362_hcd, HCuPINT);
+	DBG(3, "%s: got IRQ %04x:%04x\n", __func__, irqstat, isp1362_hcd->irqenb);
+
+	/* only handle interrupts that are currently enabled */
+	irqstat &= isp1362_hcd->irqenb;
+	isp1362_write_reg16(isp1362_hcd, HCuPINT, irqstat);
+	svc_mask = irqstat;
+
+	if (irqstat & HCuPINT_SOF) {
+		isp1362_hcd->irqenb &= ~HCuPINT_SOF;
+		isp1362_hcd->irq_stat[ISP1362_INT_SOF]++;
+		handled = 1;
+		svc_mask &= ~HCuPINT_SOF;
+		DBG(3, "%s: SOF\n", __func__);
+		isp1362_hcd->fmindex = isp1362_read_reg32(isp1362_hcd, HCFMNUM);
+		if (!list_empty(&isp1362_hcd->remove_list))
+			finish_unlinks(isp1362_hcd);
+		if (!list_empty(&isp1362_hcd->async) && !(irqstat & HCuPINT_ATL)) {
+			if (list_empty(&isp1362_hcd->atl_queue.active)) {
+				start_atl_transfers(isp1362_hcd);
+			} else {
+				isp1362_enable_int(isp1362_hcd, HCuPINT_ATL);
+				isp1362_write_reg32(isp1362_hcd, HCATLSKIP,
+						    isp1362_hcd->atl_queue.skip_map);
+				isp1362_set_mask16(isp1362_hcd, HCBUFSTAT, HCBUFSTAT_ATL_ACTIVE);
+			}
+		}
+	}
+
+	if (irqstat & HCuPINT_ISTL0) {
+		isp1362_hcd->irq_stat[ISP1362_INT_ISTL0]++;
+		handled = 1;
+		svc_mask &= ~HCuPINT_ISTL0;
+		isp1362_clr_mask16(isp1362_hcd, HCBUFSTAT, HCBUFSTAT_ISTL0_FULL);
+		DBG(1, "%s: ISTL0\n", __func__);
+		WARN_ON((int)!!isp1362_hcd->istl_flip);
+		WARN_ON(isp1362_read_reg16(isp1362_hcd, HCBUFSTAT) &
+			HCBUFSTAT_ISTL0_ACTIVE);
+		WARN_ON(!(isp1362_read_reg16(isp1362_hcd, HCBUFSTAT) &
+			HCBUFSTAT_ISTL0_DONE));
+		isp1362_hcd->irqenb &= ~HCuPINT_ISTL0;
+	}
+
+	if (irqstat & HCuPINT_ISTL1) {
+		isp1362_hcd->irq_stat[ISP1362_INT_ISTL1]++;
+		handled = 1;
+		svc_mask &= ~HCuPINT_ISTL1;
+		isp1362_clr_mask16(isp1362_hcd, HCBUFSTAT, HCBUFSTAT_ISTL1_FULL);
+		DBG(1, "%s: ISTL1\n", __func__);
+		WARN_ON(!(int)isp1362_hcd->istl_flip);
+		WARN_ON(isp1362_read_reg16(isp1362_hcd, HCBUFSTAT) &
+			HCBUFSTAT_ISTL1_ACTIVE);
+		WARN_ON(!(isp1362_read_reg16(isp1362_hcd, HCBUFSTAT) &
+			HCBUFSTAT_ISTL1_DONE));
+		isp1362_hcd->irqenb &= ~HCuPINT_ISTL1;
+	}
+
+	if (irqstat & (HCuPINT_ISTL0 | HCuPINT_ISTL1)) {
+		WARN_ON((irqstat & (HCuPINT_ISTL0 | HCuPINT_ISTL1)) ==
+			(HCuPINT_ISTL0 | HCuPINT_ISTL1));
+		finish_iso_transfers(isp1362_hcd,
+				     &isp1362_hcd->istl_queue[isp1362_hcd->istl_flip]);
+		start_iso_transfers(isp1362_hcd);
+		isp1362_hcd->istl_flip = 1 - isp1362_hcd->istl_flip;
+	}
+
+	if (irqstat & HCuPINT_INTL) {
+		u32 done_map = isp1362_read_reg32(isp1362_hcd, HCINTLDONE);
+		u32 skip_map = isp1362_read_reg32(isp1362_hcd, HCINTLSKIP);
+		isp1362_hcd->irq_stat[ISP1362_INT_INTL]++;
+
+		DBG(2, "%s: INTL\n", __func__);
+
+		svc_mask &= ~HCuPINT_INTL;
+
+		isp1362_write_reg32(isp1362_hcd, HCINTLSKIP, skip_map | done_map);
+		if (~(done_map | skip_map) == 0)
+			/* All PTDs are finished, disable INTL processing entirely */
+			isp1362_clr_mask16(isp1362_hcd, HCBUFSTAT, HCBUFSTAT_INTL_ACTIVE);
+
+		handled = 1;
+		WARN_ON(!done_map);
+		if (done_map) {
+			DBG(3, "%s: INTL done_map %08x\n", __func__, done_map);
+			finish_transfers(isp1362_hcd, done_map, &isp1362_hcd->intl_queue);
+			start_intl_transfers(isp1362_hcd);
+		}
+	}
+
+	if (irqstat & HCuPINT_ATL) {
+		u32 done_map = isp1362_read_reg32(isp1362_hcd, HCATLDONE);
+		u32 skip_map = isp1362_read_reg32(isp1362_hcd, HCATLSKIP);
+		isp1362_hcd->irq_stat[ISP1362_INT_ATL]++;
+
+		DBG(2, "%s: ATL\n", __func__);
+
+		svc_mask &= ~HCuPINT_ATL;
+
+		isp1362_write_reg32(isp1362_hcd, HCATLSKIP, skip_map | done_map);
+		if (~(done_map | skip_map) == 0)
+			isp1362_clr_mask16(isp1362_hcd, HCBUFSTAT, HCBUFSTAT_ATL_ACTIVE);
+		if (done_map) {
+			DBG(3, "%s: ATL done_map %08x\n", __func__, done_map);
+			finish_transfers(isp1362_hcd, done_map, &isp1362_hcd->atl_queue);
+			start_atl_transfers(isp1362_hcd);
+		}
+		handled = 1;
+	}
+
+	if (irqstat & HCuPINT_OPR) {
+		u32 intstat = isp1362_read_reg32(isp1362_hcd, HCINTSTAT);
+		isp1362_hcd->irq_stat[ISP1362_INT_OPR]++;
+
+		svc_mask &= ~HCuPINT_OPR;
+		DBG(2, "%s: OPR %08x:%08x\n", __func__, intstat, isp1362_hcd->intenb);
+		intstat &= isp1362_hcd->intenb;
+		if (intstat & OHCI_INTR_UE) {
+			pr_err("Unrecoverable error\n");
+			/* FIXME: do here reset or cleanup or whatever */
+		}
+		if (intstat & OHCI_INTR_RHSC) {
+			isp1362_hcd->rhstatus = isp1362_read_reg32(isp1362_hcd, HCRHSTATUS);
+			isp1362_hcd->rhport[0] = isp1362_read_reg32(isp1362_hcd, HCRHPORT1);
+			isp1362_hcd->rhport[1] = isp1362_read_reg32(isp1362_hcd, HCRHPORT2);
+		}
+		if (intstat & OHCI_INTR_RD) {
+			pr_info("%s: RESUME DETECTED\n", __func__);
+			isp1362_show_reg(isp1362_hcd, HCCONTROL);
+			usb_hcd_resume_root_hub(hcd);
+		}
+		isp1362_write_reg32(isp1362_hcd, HCINTSTAT, intstat);
+		irqstat &= ~HCuPINT_OPR;
+		handled = 1;
+	}
+
+	if (irqstat & HCuPINT_SUSP) {
+		isp1362_hcd->irq_stat[ISP1362_INT_SUSP]++;
+		handled = 1;
+		svc_mask &= ~HCuPINT_SUSP;
+
+		pr_info("%s: SUSPEND IRQ\n", __func__);
+	}
+
+	if (irqstat & HCuPINT_CLKRDY) {
+		isp1362_hcd->irq_stat[ISP1362_INT_CLKRDY]++;
+		handled = 1;
+		isp1362_hcd->irqenb &= ~HCuPINT_CLKRDY;
+		svc_mask &= ~HCuPINT_CLKRDY;
+		pr_info("%s: CLKRDY IRQ\n", __func__);
+	}
+
+	if (svc_mask)
+		pr_err("%s: Unserviced interrupt(s) %04x\n", __func__, svc_mask);
+
+	isp1362_write_reg16(isp1362_hcd, HCuPINTENB, isp1362_hcd->irqenb);
+	isp1362_hcd->irq_active--;
+	spin_unlock(&isp1362_hcd->lock);
+
+	return IRQ_RETVAL(handled);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define	MAX_PERIODIC_LOAD	900	/* out of 1000 usec */
+static int balance(struct isp1362_hcd *isp1362_hcd, u16 interval, u16 load)
+{
+	int i, branch = -ENOSPC;
+
+	/* search for the least loaded schedule branch of that interval
+	 * which has enough bandwidth left unreserved.
+	 */
+	for (i = 0; i < interval; i++) {
+		if (branch < 0 || isp1362_hcd->load[branch] > isp1362_hcd->load[i]) {
+			int j;
+
+			for (j = i; j < PERIODIC_SIZE; j += interval) {
+				if ((isp1362_hcd->load[j] + load) > MAX_PERIODIC_LOAD) {
+					pr_err("%s: new load %d load[%02x] %d max %d\n", __func__,
+					    load, j, isp1362_hcd->load[j], MAX_PERIODIC_LOAD);
+					break;
+				}
+			}
+			if (j < PERIODIC_SIZE)
+				continue;
+			branch = i;
+		}
+	}
+	return branch;
+}
+
+/* NB! ALL the code above this point runs with isp1362_hcd->lock
+   held, irqs off
+*/
+
+/*-------------------------------------------------------------------------*/
+
+static int isp1362_urb_enqueue(struct usb_hcd *hcd,
+			       struct urb *urb,
+			       gfp_t mem_flags)
+{
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	struct usb_device *udev = urb->dev;
+	unsigned int pipe = urb->pipe;
+	int is_out = !usb_pipein(pipe);
+	int type = usb_pipetype(pipe);
+	int epnum = usb_pipeendpoint(pipe);
+	struct usb_host_endpoint *hep = urb->ep;
+	struct isp1362_ep *ep = NULL;
+	unsigned long flags;
+	int retval = 0;
+
+	DBG(3, "%s: urb %p\n", __func__, urb);
+
+	if (type == PIPE_ISOCHRONOUS) {
+		pr_err("Isochronous transfers not supported\n");
+		return -ENOSPC;
+	}
+
+	URB_DBG("%s: FA %d ep%d%s %s: len %d %s%s\n", __func__,
+		usb_pipedevice(pipe), epnum,
+		is_out ? "out" : "in",
+		usb_pipecontrol(pipe) ? "ctrl" :
+			usb_pipeint(pipe) ? "int" :
+			usb_pipebulk(pipe) ? "bulk" :
+			"iso",
+		urb->transfer_buffer_length,
+		(urb->transfer_flags & URB_ZERO_PACKET) ? "ZERO_PACKET " : "",
+		!(urb->transfer_flags & URB_SHORT_NOT_OK) ?
+		"short_ok" : "");
+
+	/* avoid all allocations within spinlocks: request or endpoint */
+	if (!hep->hcpriv) {
+		ep = kcalloc(1, sizeof *ep, mem_flags);
+		if (!ep)
+			return -ENOMEM;
+	}
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+
+	/* don't submit to a dead or disabled port */
+	if (!((isp1362_hcd->rhport[0] | isp1362_hcd->rhport[1]) &
+	      (1 << USB_PORT_FEAT_ENABLE)) ||
+	    !HC_IS_RUNNING(hcd->state)) {
+		kfree(ep);
+		retval = -ENODEV;
+		goto fail_not_linked;
+	}
+
+	retval = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (retval) {
+		kfree(ep);
+		goto fail_not_linked;
+	}
+
+	if (hep->hcpriv) {
+		ep = hep->hcpriv;
+	} else {
+		INIT_LIST_HEAD(&ep->schedule);
+		INIT_LIST_HEAD(&ep->active);
+		INIT_LIST_HEAD(&ep->remove_list);
+		ep->udev = usb_get_dev(udev);
+		ep->hep = hep;
+		ep->epnum = epnum;
+		ep->maxpacket = usb_maxpacket(udev, urb->pipe, is_out);
+		ep->ptd_offset = -EINVAL;
+		ep->ptd_index = -EINVAL;
+		usb_settoggle(udev, epnum, is_out, 0);
+
+		if (type == PIPE_CONTROL)
+			ep->nextpid = USB_PID_SETUP;
+		else if (is_out)
+			ep->nextpid = USB_PID_OUT;
+		else
+			ep->nextpid = USB_PID_IN;
+
+		switch (type) {
+		case PIPE_ISOCHRONOUS:
+		case PIPE_INTERRUPT:
+			if (urb->interval > PERIODIC_SIZE)
+				urb->interval = PERIODIC_SIZE;
+			ep->interval = urb->interval;
+			ep->branch = PERIODIC_SIZE;
+			ep->load = usb_calc_bus_time(udev->speed, !is_out,
+						     (type == PIPE_ISOCHRONOUS),
+						     usb_maxpacket(udev, pipe, is_out)) / 1000;
+			break;
+		}
+		hep->hcpriv = ep;
+	}
+	ep->num_req = isp1362_hcd->req_serial++;
+
+	/* maybe put endpoint into schedule */
+	switch (type) {
+	case PIPE_CONTROL:
+	case PIPE_BULK:
+		if (list_empty(&ep->schedule)) {
+			DBG(1, "%s: Adding ep %p req %d to async schedule\n",
+				__func__, ep, ep->num_req);
+			list_add_tail(&ep->schedule, &isp1362_hcd->async);
+		}
+		break;
+	case PIPE_ISOCHRONOUS:
+	case PIPE_INTERRUPT:
+		urb->interval = ep->interval;
+
+		/* urb submitted for already existing EP */
+		if (ep->branch < PERIODIC_SIZE)
+			break;
+
+		retval = balance(isp1362_hcd, ep->interval, ep->load);
+		if (retval < 0) {
+			pr_err("%s: balance returned %d\n", __func__, retval);
+			goto fail;
+		}
+		ep->branch = retval;
+		retval = 0;
+		isp1362_hcd->fmindex = isp1362_read_reg32(isp1362_hcd, HCFMNUM);
+		DBG(1, "%s: Current frame %04x branch %02x start_frame %04x(%04x)\n",
+		    __func__, isp1362_hcd->fmindex, ep->branch,
+		    ((isp1362_hcd->fmindex + PERIODIC_SIZE - 1) &
+		     ~(PERIODIC_SIZE - 1)) + ep->branch,
+		    (isp1362_hcd->fmindex & (PERIODIC_SIZE - 1)) + ep->branch);
+
+		if (list_empty(&ep->schedule)) {
+			if (type == PIPE_ISOCHRONOUS) {
+				u16 frame = isp1362_hcd->fmindex;
+
+				frame += max_t(u16, 8, ep->interval);
+				frame &= ~(ep->interval - 1);
+				frame |= ep->branch;
+				if (frame_before(frame, isp1362_hcd->fmindex))
+					frame += ep->interval;
+				urb->start_frame = frame;
+
+				DBG(1, "%s: Adding ep %p to isoc schedule\n", __func__, ep);
+				list_add_tail(&ep->schedule, &isp1362_hcd->isoc);
+			} else {
+				DBG(1, "%s: Adding ep %p to periodic schedule\n", __func__, ep);
+				list_add_tail(&ep->schedule, &isp1362_hcd->periodic);
+			}
+		} else
+			DBG(1, "%s: ep %p already scheduled\n", __func__, ep);
+
+		DBG(2, "%s: load %d bandwidth %d -> %d\n", __func__,
+		    ep->load / ep->interval, isp1362_hcd->load[ep->branch],
+		    isp1362_hcd->load[ep->branch] + ep->load);
+		isp1362_hcd->load[ep->branch] += ep->load;
+	}
+
+	urb->hcpriv = hep;
+	ALIGNSTAT(isp1362_hcd, urb->transfer_buffer);
+
+	switch (type) {
+	case PIPE_CONTROL:
+	case PIPE_BULK:
+		start_atl_transfers(isp1362_hcd);
+		break;
+	case PIPE_INTERRUPT:
+		start_intl_transfers(isp1362_hcd);
+		break;
+	case PIPE_ISOCHRONOUS:
+		start_iso_transfers(isp1362_hcd);
+		break;
+	default:
+		BUG();
+	}
+ fail:
+	if (retval)
+		usb_hcd_unlink_urb_from_ep(hcd, urb);
+
+
+ fail_not_linked:
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+	if (retval)
+		DBG(0, "%s: urb %p failed with %d\n", __func__, urb, retval);
+	return retval;
+}
+
+static int isp1362_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	struct usb_host_endpoint *hep;
+	unsigned long flags;
+	struct isp1362_ep *ep;
+	int retval = 0;
+
+	DBG(3, "%s: urb %p\n", __func__, urb);
+
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+	retval = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (retval)
+		goto done;
+
+	hep = urb->hcpriv;
+
+	if (!hep) {
+		spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+		return -EIDRM;
+	}
+
+	ep = hep->hcpriv;
+	if (ep) {
+		/* In front of queue? */
+		if (ep->hep->urb_list.next == &urb->urb_list) {
+			if (!list_empty(&ep->active)) {
+				DBG(1, "%s: urb %p ep %p req %d active PTD[%d] $%04x\n", __func__,
+				    urb, ep, ep->num_req, ep->ptd_index, ep->ptd_offset);
+				/* disable processing and queue PTD for removal */
+				remove_ptd(isp1362_hcd, ep);
+				urb = NULL;
+			}
+		}
+		if (urb) {
+			DBG(1, "%s: Finishing ep %p req %d\n", __func__, ep,
+			    ep->num_req);
+			finish_request(isp1362_hcd, ep, urb, status);
+		} else
+			DBG(1, "%s: urb %p active; wait4irq\n", __func__, urb);
+	} else {
+		pr_warning("%s: No EP in URB %p\n", __func__, urb);
+		retval = -EINVAL;
+	}
+done:
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+
+	DBG(3, "%s: exit\n", __func__);
+
+	return retval;
+}
+
+static void isp1362_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
+{
+	struct isp1362_ep *ep = hep->hcpriv;
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	unsigned long flags;
+
+	DBG(1, "%s: ep %p\n", __func__, ep);
+	if (!ep)
+		return;
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+	if (!list_empty(&hep->urb_list)) {
+		if (!list_empty(&ep->active) && list_empty(&ep->remove_list)) {
+			DBG(1, "%s: Removing ep %p req %d PTD[%d] $%04x\n", __func__,
+			    ep, ep->num_req, ep->ptd_index, ep->ptd_offset);
+			remove_ptd(isp1362_hcd, ep);
+			pr_info("%s: Waiting for Interrupt to clean up\n", __func__);
+		}
+	}
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+	/* Wait for interrupt to clear out active list */
+	while (!list_empty(&ep->active))
+		msleep(1);
+
+	DBG(1, "%s: Freeing EP %p\n", __func__, ep);
+
+	usb_put_dev(ep->udev);
+	kfree(ep);
+	hep->hcpriv = NULL;
+}
+
+static int isp1362_get_frame(struct usb_hcd *hcd)
+{
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	u32 fmnum;
+	unsigned long flags;
+
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+	fmnum = isp1362_read_reg32(isp1362_hcd, HCFMNUM);
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+
+	return (int)fmnum;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Adapted from ohci-hub.c */
+static int isp1362_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	int ports, i, changed = 0;
+	unsigned long flags;
+
+	if (!HC_IS_RUNNING(hcd->state))
+		return -ESHUTDOWN;
+
+	/* Report no status change now, if we are scheduled to be
+	   called later */
+	if (timer_pending(&hcd->rh_timer))
+		return 0;
+
+	ports = isp1362_hcd->rhdesca & RH_A_NDP;
+	BUG_ON(ports > 2);
+
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+	/* init status */
+	if (isp1362_hcd->rhstatus & (RH_HS_LPSC | RH_HS_OCIC))
+		buf[0] = changed = 1;
+	else
+		buf[0] = 0;
+
+	for (i = 0; i < ports; i++) {
+		u32 status = isp1362_hcd->rhport[i];
+
+		if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC |
+			      RH_PS_OCIC | RH_PS_PRSC)) {
+			changed = 1;
+			buf[0] |= 1 << (i + 1);
+			continue;
+		}
+
+		if (!(status & RH_PS_CCS))
+			continue;
+	}
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+	return changed;
+}
+
+static void isp1362_hub_descriptor(struct isp1362_hcd *isp1362_hcd,
+				   struct usb_hub_descriptor *desc)
+{
+	u32 reg = isp1362_hcd->rhdesca;
+
+	DBG(3, "%s: enter\n", __func__);
+
+	desc->bDescriptorType = 0x29;
+	desc->bDescLength = 9;
+	desc->bHubContrCurrent = 0;
+	desc->bNbrPorts = reg & 0x3;
+	/* Power switching, device type, overcurrent. */
+	desc->wHubCharacteristics = cpu_to_le16((reg >> 8) & 0x1f);
+	DBG(0, "%s: hubcharacteristics = %02x\n", __func__, cpu_to_le16((reg >> 8) & 0x1f));
+	desc->bPwrOn2PwrGood = (reg >> 24) & 0xff;
+	/* two bitmaps:  ports removable, and legacy PortPwrCtrlMask */
+	desc->bitmap[0] = desc->bNbrPorts == 1 ? 1 << 1 : 3 << 1;
+	desc->bitmap[1] = ~0;
+
+	DBG(3, "%s: exit\n", __func__);
+}
+
+/* Adapted from ohci-hub.c */
+static int isp1362_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+			       u16 wIndex, char *buf, u16 wLength)
+{
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	int retval = 0;
+	unsigned long flags;
+	unsigned long t1;
+	int ports = isp1362_hcd->rhdesca & RH_A_NDP;
+	u32 tmp = 0;
+
+	switch (typeReq) {
+	case ClearHubFeature:
+		DBG(0, "ClearHubFeature: ");
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+			_DBG(0, "C_HUB_OVER_CURRENT\n");
+			spin_lock_irqsave(&isp1362_hcd->lock, flags);
+			isp1362_write_reg32(isp1362_hcd, HCRHSTATUS, RH_HS_OCIC);
+			spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+		case C_HUB_LOCAL_POWER:
+			_DBG(0, "C_HUB_LOCAL_POWER\n");
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case SetHubFeature:
+		DBG(0, "SetHubFeature: ");
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+		case C_HUB_LOCAL_POWER:
+			_DBG(0, "C_HUB_OVER_CURRENT or C_HUB_LOCAL_POWER\n");
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case GetHubDescriptor:
+		DBG(0, "GetHubDescriptor\n");
+		isp1362_hub_descriptor(isp1362_hcd, (struct usb_hub_descriptor *)buf);
+		break;
+	case GetHubStatus:
+		DBG(0, "GetHubStatus\n");
+		put_unaligned(cpu_to_le32(0), (__le32 *) buf);
+		break;
+	case GetPortStatus:
+#ifndef VERBOSE
+		DBG(0, "GetPortStatus\n");
+#endif
+		if (!wIndex || wIndex > ports)
+			goto error;
+		tmp = isp1362_hcd->rhport[--wIndex];
+		put_unaligned(cpu_to_le32(tmp), (__le32 *) buf);
+		break;
+	case ClearPortFeature:
+		DBG(0, "ClearPortFeature: ");
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			_DBG(0, "USB_PORT_FEAT_ENABLE\n");
+			tmp = RH_PS_CCS;
+			break;
+		case USB_PORT_FEAT_C_ENABLE:
+			_DBG(0, "USB_PORT_FEAT_C_ENABLE\n");
+			tmp = RH_PS_PESC;
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			_DBG(0, "USB_PORT_FEAT_SUSPEND\n");
+			tmp = RH_PS_POCI;
+			break;
+		case USB_PORT_FEAT_C_SUSPEND:
+			_DBG(0, "USB_PORT_FEAT_C_SUSPEND\n");
+			tmp = RH_PS_PSSC;
+			break;
+		case USB_PORT_FEAT_POWER:
+			_DBG(0, "USB_PORT_FEAT_POWER\n");
+			tmp = RH_PS_LSDA;
+
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+			_DBG(0, "USB_PORT_FEAT_C_CONNECTION\n");
+			tmp = RH_PS_CSC;
+			break;
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			_DBG(0, "USB_PORT_FEAT_C_OVER_CURRENT\n");
+			tmp = RH_PS_OCIC;
+			break;
+		case USB_PORT_FEAT_C_RESET:
+			_DBG(0, "USB_PORT_FEAT_C_RESET\n");
+			tmp = RH_PS_PRSC;
+			break;
+		default:
+			goto error;
+		}
+
+		spin_lock_irqsave(&isp1362_hcd->lock, flags);
+		isp1362_write_reg32(isp1362_hcd, HCRHPORT1 + wIndex, tmp);
+		isp1362_hcd->rhport[wIndex] =
+			isp1362_read_reg32(isp1362_hcd, HCRHPORT1 + wIndex);
+		spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+		break;
+	case SetPortFeature:
+		DBG(0, "SetPortFeature: ");
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+			_DBG(0, "USB_PORT_FEAT_SUSPEND\n");
+#ifdef	CONFIG_USB_OTG
+			if (ohci->hcd.self.otg_port == (wIndex + 1) &&
+			    ohci->hcd.self.b_hnp_enable) {
+				start_hnp(ohci);
+				break;
+			}
+#endif
+			spin_lock_irqsave(&isp1362_hcd->lock, flags);
+			isp1362_write_reg32(isp1362_hcd, HCRHPORT1 + wIndex, RH_PS_PSS);
+			isp1362_hcd->rhport[wIndex] =
+				isp1362_read_reg32(isp1362_hcd, HCRHPORT1 + wIndex);
+			spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+			break;
+		case USB_PORT_FEAT_POWER:
+			_DBG(0, "USB_PORT_FEAT_POWER\n");
+			spin_lock_irqsave(&isp1362_hcd->lock, flags);
+			isp1362_write_reg32(isp1362_hcd, HCRHPORT1 + wIndex, RH_PS_PPS);
+			isp1362_hcd->rhport[wIndex] =
+				isp1362_read_reg32(isp1362_hcd, HCRHPORT1 + wIndex);
+			spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+			break;
+		case USB_PORT_FEAT_RESET:
+			_DBG(0, "USB_PORT_FEAT_RESET\n");
+			spin_lock_irqsave(&isp1362_hcd->lock, flags);
+
+			t1 = jiffies + msecs_to_jiffies(USB_RESET_WIDTH);
+			while (time_before(jiffies, t1)) {
+				/* spin until any current reset finishes */
+				for (;;) {
+					tmp = isp1362_read_reg32(isp1362_hcd, HCRHPORT1 + wIndex);
+					if (!(tmp & RH_PS_PRS))
+						break;
+					udelay(500);
+				}
+				if (!(tmp & RH_PS_CCS))
+					break;
+				/* Reset lasts 10ms (claims datasheet) */
+				isp1362_write_reg32(isp1362_hcd, HCRHPORT1 + wIndex, (RH_PS_PRS));
+
+				spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+				msleep(10);
+				spin_lock_irqsave(&isp1362_hcd->lock, flags);
+			}
+
+			isp1362_hcd->rhport[wIndex] = isp1362_read_reg32(isp1362_hcd,
+									 HCRHPORT1 + wIndex);
+			spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+			break;
+		default:
+			goto error;
+		}
+		break;
+
+	default:
+ error:
+		/* "protocol stall" on error */
+		_DBG(0, "PROTOCOL STALL\n");
+		retval = -EPIPE;
+	}
+
+	return retval;
+}
+
+#ifdef	CONFIG_PM
+static int isp1362_bus_suspend(struct usb_hcd *hcd)
+{
+	int status = 0;
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	unsigned long flags;
+
+	if (time_before(jiffies, isp1362_hcd->next_statechange))
+		msleep(5);
+
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+
+	isp1362_hcd->hc_control = isp1362_read_reg32(isp1362_hcd, HCCONTROL);
+	switch (isp1362_hcd->hc_control & OHCI_CTRL_HCFS) {
+	case OHCI_USB_RESUME:
+		DBG(0, "%s: resume/suspend?\n", __func__);
+		isp1362_hcd->hc_control &= ~OHCI_CTRL_HCFS;
+		isp1362_hcd->hc_control |= OHCI_USB_RESET;
+		isp1362_write_reg32(isp1362_hcd, HCCONTROL, isp1362_hcd->hc_control);
+		/* FALL THROUGH */
+	case OHCI_USB_RESET:
+		status = -EBUSY;
+		pr_warning("%s: needs reinit!\n", __func__);
+		goto done;
+	case OHCI_USB_SUSPEND:
+		pr_warning("%s: already suspended?\n", __func__);
+		goto done;
+	}
+	DBG(0, "%s: suspend root hub\n", __func__);
+
+	/* First stop any processing */
+	hcd->state = HC_STATE_QUIESCING;
+	if (!list_empty(&isp1362_hcd->atl_queue.active) ||
+	    !list_empty(&isp1362_hcd->intl_queue.active) ||
+	    !list_empty(&isp1362_hcd->istl_queue[0] .active) ||
+	    !list_empty(&isp1362_hcd->istl_queue[1] .active)) {
+		int limit;
+
+		isp1362_write_reg32(isp1362_hcd, HCATLSKIP, ~0);
+		isp1362_write_reg32(isp1362_hcd, HCINTLSKIP, ~0);
+		isp1362_write_reg16(isp1362_hcd, HCBUFSTAT, 0);
+		isp1362_write_reg16(isp1362_hcd, HCuPINTENB, 0);
+		isp1362_write_reg32(isp1362_hcd, HCINTSTAT, OHCI_INTR_SF);
+
+		DBG(0, "%s: stopping schedules ...\n", __func__);
+		limit = 2000;
+		while (limit > 0) {
+			udelay(250);
+			limit -= 250;
+			if (isp1362_read_reg32(isp1362_hcd, HCINTSTAT) & OHCI_INTR_SF)
+				break;
+		}
+		mdelay(7);
+		if (isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_ATL) {
+			u32 done_map = isp1362_read_reg32(isp1362_hcd, HCATLDONE);
+			finish_transfers(isp1362_hcd, done_map, &isp1362_hcd->atl_queue);
+		}
+		if (isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_INTL) {
+			u32 done_map = isp1362_read_reg32(isp1362_hcd, HCINTLDONE);
+			finish_transfers(isp1362_hcd, done_map, &isp1362_hcd->intl_queue);
+		}
+		if (isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_ISTL0)
+			finish_iso_transfers(isp1362_hcd, &isp1362_hcd->istl_queue[0]);
+		if (isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_ISTL1)
+			finish_iso_transfers(isp1362_hcd, &isp1362_hcd->istl_queue[1]);
+	}
+	DBG(0, "%s: HCINTSTAT: %08x\n", __func__,
+		    isp1362_read_reg32(isp1362_hcd, HCINTSTAT));
+	isp1362_write_reg32(isp1362_hcd, HCINTSTAT,
+			    isp1362_read_reg32(isp1362_hcd, HCINTSTAT));
+
+	/* Suspend hub */
+	isp1362_hcd->hc_control = OHCI_USB_SUSPEND;
+	isp1362_show_reg(isp1362_hcd, HCCONTROL);
+	isp1362_write_reg32(isp1362_hcd, HCCONTROL, isp1362_hcd->hc_control);
+	isp1362_show_reg(isp1362_hcd, HCCONTROL);
+
+#if 1
+	isp1362_hcd->hc_control = isp1362_read_reg32(isp1362_hcd, HCCONTROL);
+	if ((isp1362_hcd->hc_control & OHCI_CTRL_HCFS) != OHCI_USB_SUSPEND) {
+		pr_err("%s: controller won't suspend %08x\n", __func__,
+		    isp1362_hcd->hc_control);
+		status = -EBUSY;
+	} else
+#endif
+	{
+		/* no resumes until devices finish suspending */
+		isp1362_hcd->next_statechange = jiffies + msecs_to_jiffies(5);
+	}
+done:
+	if (status == 0) {
+		hcd->state = HC_STATE_SUSPENDED;
+		DBG(0, "%s: HCD suspended: %08x\n", __func__,
+		    isp1362_read_reg32(isp1362_hcd, HCCONTROL));
+	}
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+	return status;
+}
+
+static int isp1362_bus_resume(struct usb_hcd *hcd)
+{
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	u32 port;
+	unsigned long flags;
+	int status = -EINPROGRESS;
+
+	if (time_before(jiffies, isp1362_hcd->next_statechange))
+		msleep(5);
+
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+	isp1362_hcd->hc_control = isp1362_read_reg32(isp1362_hcd, HCCONTROL);
+	pr_info("%s: HCCONTROL: %08x\n", __func__, isp1362_hcd->hc_control);
+	if (hcd->state == HC_STATE_RESUMING) {
+		pr_warning("%s: duplicate resume\n", __func__);
+		status = 0;
+	} else
+		switch (isp1362_hcd->hc_control & OHCI_CTRL_HCFS) {
+		case OHCI_USB_SUSPEND:
+			DBG(0, "%s: resume root hub\n", __func__);
+			isp1362_hcd->hc_control &= ~OHCI_CTRL_HCFS;
+			isp1362_hcd->hc_control |= OHCI_USB_RESUME;
+			isp1362_write_reg32(isp1362_hcd, HCCONTROL, isp1362_hcd->hc_control);
+			break;
+		case OHCI_USB_RESUME:
+			/* HCFS changes sometime after INTR_RD */
+			DBG(0, "%s: remote wakeup\n", __func__);
+			break;
+		case OHCI_USB_OPER:
+			DBG(0, "%s: odd resume\n", __func__);
+			status = 0;
+			hcd->self.root_hub->dev.power.power_state = PMSG_ON;
+			break;
+		default:		/* RESET, we lost power */
+			DBG(0, "%s: root hub hardware reset\n", __func__);
+			status = -EBUSY;
+		}
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+	if (status == -EBUSY) {
+		DBG(0, "%s: Restarting HC\n", __func__);
+		isp1362_hc_stop(hcd);
+		return isp1362_hc_start(hcd);
+	}
+	if (status != -EINPROGRESS)
+		return status;
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+	port = isp1362_read_reg32(isp1362_hcd, HCRHDESCA) & RH_A_NDP;
+	while (port--) {
+		u32 stat = isp1362_read_reg32(isp1362_hcd, HCRHPORT1 + port);
+
+		/* force global, not selective, resume */
+		if (!(stat & RH_PS_PSS)) {
+			DBG(0, "%s: Not Resuming RH port %d\n", __func__, port);
+			continue;
+		}
+		DBG(0, "%s: Resuming RH port %d\n", __func__, port);
+		isp1362_write_reg32(isp1362_hcd, HCRHPORT1 + port, RH_PS_POCI);
+	}
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+
+	/* Some controllers (lucent) need extra-long delays */
+	hcd->state = HC_STATE_RESUMING;
+	mdelay(20 /* usb 11.5.1.10 */ + 15);
+
+	isp1362_hcd->hc_control = OHCI_USB_OPER;
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+	isp1362_show_reg(isp1362_hcd, HCCONTROL);
+	isp1362_write_reg32(isp1362_hcd, HCCONTROL, isp1362_hcd->hc_control);
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+	/* TRSMRCY */
+	msleep(10);
+
+	/* keep it alive for ~5x suspend + resume costs */
+	isp1362_hcd->next_statechange = jiffies + msecs_to_jiffies(250);
+
+	hcd->self.root_hub->dev.power.power_state = PMSG_ON;
+	hcd->state = HC_STATE_RUNNING;
+	return 0;
+}
+#else
+#define	isp1362_bus_suspend	NULL
+#define	isp1362_bus_resume	NULL
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef STUB_DEBUG_FILE
+
+static inline void create_debug_file(struct isp1362_hcd *isp1362_hcd)
+{
+}
+static inline void remove_debug_file(struct isp1362_hcd *isp1362_hcd)
+{
+}
+
+#else
+
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+
+static void dump_irq(struct seq_file *s, char *label, u16 mask)
+{
+	seq_printf(s, "%-15s %04x%s%s%s%s%s%s\n", label, mask,
+		   mask & HCuPINT_CLKRDY ? " clkrdy" : "",
+		   mask & HCuPINT_SUSP ? " susp" : "",
+		   mask & HCuPINT_OPR ? " opr" : "",
+		   mask & HCuPINT_EOT ? " eot" : "",
+		   mask & HCuPINT_ATL ? " atl" : "",
+		   mask & HCuPINT_SOF ? " sof" : "");
+}
+
+static void dump_int(struct seq_file *s, char *label, u32 mask)
+{
+	seq_printf(s, "%-15s %08x%s%s%s%s%s%s%s\n", label, mask,
+		   mask & OHCI_INTR_MIE ? " MIE" : "",
+		   mask & OHCI_INTR_RHSC ? " rhsc" : "",
+		   mask & OHCI_INTR_FNO ? " fno" : "",
+		   mask & OHCI_INTR_UE ? " ue" : "",
+		   mask & OHCI_INTR_RD ? " rd" : "",
+		   mask & OHCI_INTR_SF ? " sof" : "",
+		   mask & OHCI_INTR_SO ? " so" : "");
+}
+
+static void dump_ctrl(struct seq_file *s, char *label, u32 mask)
+{
+	seq_printf(s, "%-15s %08x%s%s%s\n", label, mask,
+		   mask & OHCI_CTRL_RWC ? " rwc" : "",
+		   mask & OHCI_CTRL_RWE ? " rwe" : "",
+		   ({
+			   char *hcfs;
+			   switch (mask & OHCI_CTRL_HCFS) {
+			   case OHCI_USB_OPER:
+				   hcfs = " oper";
+				   break;
+			   case OHCI_USB_RESET:
+				   hcfs = " reset";
+				   break;
+			   case OHCI_USB_RESUME:
+				   hcfs = " resume";
+				   break;
+			   case OHCI_USB_SUSPEND:
+				   hcfs = " suspend";
+				   break;
+			   default:
+				   hcfs = " ?";
+			   }
+			   hcfs;
+		   }));
+}
+
+static void dump_regs(struct seq_file *s, struct isp1362_hcd *isp1362_hcd)
+{
+	seq_printf(s, "HCREVISION [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCREVISION),
+		   isp1362_read_reg32(isp1362_hcd, HCREVISION));
+	seq_printf(s, "HCCONTROL  [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCCONTROL),
+		   isp1362_read_reg32(isp1362_hcd, HCCONTROL));
+	seq_printf(s, "HCCMDSTAT  [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCCMDSTAT),
+		   isp1362_read_reg32(isp1362_hcd, HCCMDSTAT));
+	seq_printf(s, "HCINTSTAT  [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCINTSTAT),
+		   isp1362_read_reg32(isp1362_hcd, HCINTSTAT));
+	seq_printf(s, "HCINTENB   [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCINTENB),
+		   isp1362_read_reg32(isp1362_hcd, HCINTENB));
+	seq_printf(s, "HCFMINTVL  [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCFMINTVL),
+		   isp1362_read_reg32(isp1362_hcd, HCFMINTVL));
+	seq_printf(s, "HCFMREM    [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCFMREM),
+		   isp1362_read_reg32(isp1362_hcd, HCFMREM));
+	seq_printf(s, "HCFMNUM    [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCFMNUM),
+		   isp1362_read_reg32(isp1362_hcd, HCFMNUM));
+	seq_printf(s, "HCLSTHRESH [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCLSTHRESH),
+		   isp1362_read_reg32(isp1362_hcd, HCLSTHRESH));
+	seq_printf(s, "HCRHDESCA  [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCRHDESCA),
+		   isp1362_read_reg32(isp1362_hcd, HCRHDESCA));
+	seq_printf(s, "HCRHDESCB  [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCRHDESCB),
+		   isp1362_read_reg32(isp1362_hcd, HCRHDESCB));
+	seq_printf(s, "HCRHSTATUS [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCRHSTATUS),
+		   isp1362_read_reg32(isp1362_hcd, HCRHSTATUS));
+	seq_printf(s, "HCRHPORT1  [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCRHPORT1),
+		   isp1362_read_reg32(isp1362_hcd, HCRHPORT1));
+	seq_printf(s, "HCRHPORT2  [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCRHPORT2),
+		   isp1362_read_reg32(isp1362_hcd, HCRHPORT2));
+	seq_printf(s, "\n");
+	seq_printf(s, "HCHWCFG    [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCHWCFG),
+		   isp1362_read_reg16(isp1362_hcd, HCHWCFG));
+	seq_printf(s, "HCDMACFG   [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCDMACFG),
+		   isp1362_read_reg16(isp1362_hcd, HCDMACFG));
+	seq_printf(s, "HCXFERCTR  [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCXFERCTR),
+		   isp1362_read_reg16(isp1362_hcd, HCXFERCTR));
+	seq_printf(s, "HCuPINT    [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCuPINT),
+		   isp1362_read_reg16(isp1362_hcd, HCuPINT));
+	seq_printf(s, "HCuPINTENB [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCuPINTENB),
+		   isp1362_read_reg16(isp1362_hcd, HCuPINTENB));
+	seq_printf(s, "HCCHIPID   [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCCHIPID),
+		   isp1362_read_reg16(isp1362_hcd, HCCHIPID));
+	seq_printf(s, "HCSCRATCH  [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCSCRATCH),
+		   isp1362_read_reg16(isp1362_hcd, HCSCRATCH));
+	seq_printf(s, "HCBUFSTAT  [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCBUFSTAT),
+		   isp1362_read_reg16(isp1362_hcd, HCBUFSTAT));
+	seq_printf(s, "HCDIRADDR  [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCDIRADDR),
+		   isp1362_read_reg32(isp1362_hcd, HCDIRADDR));
+#if 0
+	seq_printf(s, "HCDIRDATA  [%02x]     %04x\n", ISP1362_REG_NO(HCDIRDATA),
+		   isp1362_read_reg16(isp1362_hcd, HCDIRDATA));
+#endif
+	seq_printf(s, "HCISTLBUFSZ[%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCISTLBUFSZ),
+		   isp1362_read_reg16(isp1362_hcd, HCISTLBUFSZ));
+	seq_printf(s, "HCISTLRATE [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCISTLRATE),
+		   isp1362_read_reg16(isp1362_hcd, HCISTLRATE));
+	seq_printf(s, "\n");
+	seq_printf(s, "HCINTLBUFSZ[%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCINTLBUFSZ),
+		   isp1362_read_reg16(isp1362_hcd, HCINTLBUFSZ));
+	seq_printf(s, "HCINTLBLKSZ[%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCINTLBLKSZ),
+		   isp1362_read_reg16(isp1362_hcd, HCINTLBLKSZ));
+	seq_printf(s, "HCINTLDONE [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCINTLDONE),
+		   isp1362_read_reg32(isp1362_hcd, HCINTLDONE));
+	seq_printf(s, "HCINTLSKIP [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCINTLSKIP),
+		   isp1362_read_reg32(isp1362_hcd, HCINTLSKIP));
+	seq_printf(s, "HCINTLLAST [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCINTLLAST),
+		   isp1362_read_reg32(isp1362_hcd, HCINTLLAST));
+	seq_printf(s, "HCINTLCURR [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCINTLCURR),
+		   isp1362_read_reg16(isp1362_hcd, HCINTLCURR));
+	seq_printf(s, "\n");
+	seq_printf(s, "HCATLBUFSZ [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCATLBUFSZ),
+		   isp1362_read_reg16(isp1362_hcd, HCATLBUFSZ));
+	seq_printf(s, "HCATLBLKSZ [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCATLBLKSZ),
+		   isp1362_read_reg16(isp1362_hcd, HCATLBLKSZ));
+#if 0
+	seq_printf(s, "HCATLDONE  [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCATLDONE),
+		   isp1362_read_reg32(isp1362_hcd, HCATLDONE));
+#endif
+	seq_printf(s, "HCATLSKIP  [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCATLSKIP),
+		   isp1362_read_reg32(isp1362_hcd, HCATLSKIP));
+	seq_printf(s, "HCATLLAST  [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCATLLAST),
+		   isp1362_read_reg32(isp1362_hcd, HCATLLAST));
+	seq_printf(s, "HCATLCURR  [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCATLCURR),
+		   isp1362_read_reg16(isp1362_hcd, HCATLCURR));
+	seq_printf(s, "\n");
+	seq_printf(s, "HCATLDTC   [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCATLDTC),
+		   isp1362_read_reg16(isp1362_hcd, HCATLDTC));
+	seq_printf(s, "HCATLDTCTO [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCATLDTCTO),
+		   isp1362_read_reg16(isp1362_hcd, HCATLDTCTO));
+}
+
+static int proc_isp1362_show(struct seq_file *s, void *unused)
+{
+	struct isp1362_hcd *isp1362_hcd = s->private;
+	struct isp1362_ep *ep;
+	int i;
+
+	seq_printf(s, "%s\n%s version %s\n",
+		   isp1362_hcd_to_hcd(isp1362_hcd)->product_desc, hcd_name, DRIVER_VERSION);
+
+	/* collect statistics to help estimate potential win for
+	 * DMA engines that care about alignment (PXA)
+	 */
+	seq_printf(s, "alignment:  16b/%ld 8b/%ld 4b/%ld 2b/%ld 1b/%ld\n",
+		   isp1362_hcd->stat16, isp1362_hcd->stat8, isp1362_hcd->stat4,
+		   isp1362_hcd->stat2, isp1362_hcd->stat1);
+	seq_printf(s, "max # ptds in ATL  fifo: %d\n", isp1362_hcd->atl_queue.stat_maxptds);
+	seq_printf(s, "max # ptds in INTL fifo: %d\n", isp1362_hcd->intl_queue.stat_maxptds);
+	seq_printf(s, "max # ptds in ISTL fifo: %d\n",
+		   max(isp1362_hcd->istl_queue[0] .stat_maxptds,
+		       isp1362_hcd->istl_queue[1] .stat_maxptds));
+
+	/* FIXME: don't show the following in suspended state */
+	spin_lock_irq(&isp1362_hcd->lock);
+
+	dump_irq(s, "hc_irq_enable", isp1362_read_reg16(isp1362_hcd, HCuPINTENB));
+	dump_irq(s, "hc_irq_status", isp1362_read_reg16(isp1362_hcd, HCuPINT));
+	dump_int(s, "ohci_int_enable", isp1362_read_reg32(isp1362_hcd, HCINTENB));
+	dump_int(s, "ohci_int_status", isp1362_read_reg32(isp1362_hcd, HCINTSTAT));
+	dump_ctrl(s, "ohci_control", isp1362_read_reg32(isp1362_hcd, HCCONTROL));
+
+	for (i = 0; i < NUM_ISP1362_IRQS; i++)
+		if (isp1362_hcd->irq_stat[i])
+			seq_printf(s, "%-15s: %d\n",
+				   ISP1362_INT_NAME(i), isp1362_hcd->irq_stat[i]);
+
+	dump_regs(s, isp1362_hcd);
+	list_for_each_entry(ep, &isp1362_hcd->async, schedule) {
+		struct urb *urb;
+
+		seq_printf(s, "%p, ep%d%s, maxpacket %d:\n", ep, ep->epnum,
+			   ({
+				   char *s;
+				   switch (ep->nextpid) {
+				   case USB_PID_IN:
+					   s = "in";
+					   break;
+				   case USB_PID_OUT:
+					   s = "out";
+					   break;
+				   case USB_PID_SETUP:
+					   s = "setup";
+					   break;
+				   case USB_PID_ACK:
+					   s = "status";
+					   break;
+				   default:
+					   s = "?";
+					   break;
+				   };
+				   s;}), ep->maxpacket) ;
+		list_for_each_entry(urb, &ep->hep->urb_list, urb_list) {
+			seq_printf(s, "  urb%p, %d/%d\n", urb,
+				   urb->actual_length,
+				   urb->transfer_buffer_length);
+		}
+	}
+	if (!list_empty(&isp1362_hcd->async))
+		seq_printf(s, "\n");
+	dump_ptd_queue(&isp1362_hcd->atl_queue);
+
+	seq_printf(s, "periodic size= %d\n", PERIODIC_SIZE);
+
+	list_for_each_entry(ep, &isp1362_hcd->periodic, schedule) {
+		seq_printf(s, "branch:%2d load:%3d PTD[%d] $%04x:\n", ep->branch,
+			   isp1362_hcd->load[ep->branch], ep->ptd_index, ep->ptd_offset);
+
+		seq_printf(s, "   %d/%p (%sdev%d ep%d%s max %d)\n",
+			   ep->interval, ep,
+			   (ep->udev->speed == USB_SPEED_FULL) ? "" : "ls ",
+			   ep->udev->devnum, ep->epnum,
+			   (ep->epnum == 0) ? "" :
+			   ((ep->nextpid == USB_PID_IN) ?
+			    "in" : "out"), ep->maxpacket);
+	}
+	dump_ptd_queue(&isp1362_hcd->intl_queue);
+
+	seq_printf(s, "ISO:\n");
+
+	list_for_each_entry(ep, &isp1362_hcd->isoc, schedule) {
+		seq_printf(s, "   %d/%p (%sdev%d ep%d%s max %d)\n",
+			   ep->interval, ep,
+			   (ep->udev->speed == USB_SPEED_FULL) ? "" : "ls ",
+			   ep->udev->devnum, ep->epnum,
+			   (ep->epnum == 0) ? "" :
+			   ((ep->nextpid == USB_PID_IN) ?
+			    "in" : "out"), ep->maxpacket);
+	}
+
+	spin_unlock_irq(&isp1362_hcd->lock);
+	seq_printf(s, "\n");
+
+	return 0;
+}
+
+static int proc_isp1362_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, proc_isp1362_show, PDE(inode)->data);
+}
+
+static const struct file_operations proc_ops = {
+	.open = proc_isp1362_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+/* expect just one isp1362_hcd per system */
+static const char proc_filename[] = "driver/isp1362";
+
+static void create_debug_file(struct isp1362_hcd *isp1362_hcd)
+{
+	struct proc_dir_entry *pde;
+
+	pde = create_proc_entry(proc_filename, 0, NULL);
+	if (pde == NULL) {
+		pr_warning("%s: Failed to create debug file '%s'\n", __func__, proc_filename);
+		return;
+	}
+
+	pde->proc_fops = &proc_ops;
+	pde->data = isp1362_hcd;
+	isp1362_hcd->pde = pde;
+}
+
+static void remove_debug_file(struct isp1362_hcd *isp1362_hcd)
+{
+	if (isp1362_hcd->pde)
+		remove_proc_entry(proc_filename, 0);
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static void isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd)
+{
+	int tmp = 20;
+	unsigned long flags;
+
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+
+	isp1362_write_reg16(isp1362_hcd, HCSWRES, HCSWRES_MAGIC);
+	isp1362_write_reg32(isp1362_hcd, HCCMDSTAT, OHCI_HCR);
+	while (--tmp) {
+		mdelay(1);
+		if (!(isp1362_read_reg32(isp1362_hcd, HCCMDSTAT) & OHCI_HCR))
+			break;
+	}
+	if (!tmp)
+		pr_err("Software reset timeout\n");
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+}
+
+static int isp1362_mem_config(struct usb_hcd *hcd)
+{
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	unsigned long flags;
+	u32 total;
+	u16 istl_size = ISP1362_ISTL_BUFSIZE;
+	u16 intl_blksize = ISP1362_INTL_BLKSIZE + PTD_HEADER_SIZE;
+	u16 intl_size = ISP1362_INTL_BUFFERS * intl_blksize;
+	u16 atl_blksize = ISP1362_ATL_BLKSIZE + PTD_HEADER_SIZE;
+	u16 atl_buffers = (ISP1362_BUF_SIZE - (istl_size + intl_size)) / atl_blksize;
+	u16 atl_size;
+	int i;
+
+	WARN_ON(istl_size & 3);
+	WARN_ON(atl_blksize & 3);
+	WARN_ON(intl_blksize & 3);
+	WARN_ON(atl_blksize < PTD_HEADER_SIZE);
+	WARN_ON(intl_blksize < PTD_HEADER_SIZE);
+
+	BUG_ON((unsigned)ISP1362_INTL_BUFFERS > 32);
+	if (atl_buffers > 32)
+		atl_buffers = 32;
+	atl_size = atl_buffers * atl_blksize;
+	total = atl_size + intl_size + istl_size;
+	dev_info(hcd->self.controller, "ISP1362 Memory usage:\n");
+	dev_info(hcd->self.controller, "  ISTL:    2 * %4d:     %4d @ $%04x:$%04x\n",
+		 istl_size / 2, istl_size, 0, istl_size / 2);
+	dev_info(hcd->self.controller, "  INTL: %4d * (%3u+8):  %4d @ $%04x\n",
+		 ISP1362_INTL_BUFFERS, intl_blksize - PTD_HEADER_SIZE,
+		 intl_size, istl_size);
+	dev_info(hcd->self.controller, "  ATL : %4d * (%3u+8):  %4d @ $%04x\n",
+		 atl_buffers, atl_blksize - PTD_HEADER_SIZE,
+		 atl_size, istl_size + intl_size);
+	dev_info(hcd->self.controller, "  USED/FREE:   %4d      %4d\n", total,
+		 ISP1362_BUF_SIZE - total);
+
+	if (total > ISP1362_BUF_SIZE) {
+		dev_err(hcd->self.controller, "%s: Memory requested: %d, available %d\n",
+			__func__, total, ISP1362_BUF_SIZE);
+		return -ENOMEM;
+	}
+
+	total = istl_size + intl_size + atl_size;
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+
+	for (i = 0; i < 2; i++) {
+		isp1362_hcd->istl_queue[i].buf_start = i * istl_size / 2,
+		isp1362_hcd->istl_queue[i].buf_size = istl_size / 2;
+		isp1362_hcd->istl_queue[i].blk_size = 4;
+		INIT_LIST_HEAD(&isp1362_hcd->istl_queue[i].active);
+		snprintf(isp1362_hcd->istl_queue[i].name,
+			 sizeof(isp1362_hcd->istl_queue[i].name), "ISTL%d", i);
+		DBG(3, "%s: %5s buf $%04x %d\n", __func__,
+		     isp1362_hcd->istl_queue[i].name,
+		     isp1362_hcd->istl_queue[i].buf_start,
+		     isp1362_hcd->istl_queue[i].buf_size);
+	}
+	isp1362_write_reg16(isp1362_hcd, HCISTLBUFSZ, istl_size / 2);
+
+	isp1362_hcd->intl_queue.buf_start = istl_size;
+	isp1362_hcd->intl_queue.buf_size = intl_size;
+	isp1362_hcd->intl_queue.buf_count = ISP1362_INTL_BUFFERS;
+	isp1362_hcd->intl_queue.blk_size = intl_blksize;
+	isp1362_hcd->intl_queue.buf_avail = isp1362_hcd->intl_queue.buf_count;
+	isp1362_hcd->intl_queue.skip_map = ~0;
+	INIT_LIST_HEAD(&isp1362_hcd->intl_queue.active);
+
+	isp1362_write_reg16(isp1362_hcd, HCINTLBUFSZ,
+			    isp1362_hcd->intl_queue.buf_size);
+	isp1362_write_reg16(isp1362_hcd, HCINTLBLKSZ,
+			    isp1362_hcd->intl_queue.blk_size - PTD_HEADER_SIZE);
+	isp1362_write_reg32(isp1362_hcd, HCINTLSKIP, ~0);
+	isp1362_write_reg32(isp1362_hcd, HCINTLLAST,
+			    1 << (ISP1362_INTL_BUFFERS - 1));
+
+	isp1362_hcd->atl_queue.buf_start = istl_size + intl_size;
+	isp1362_hcd->atl_queue.buf_size = atl_size;
+	isp1362_hcd->atl_queue.buf_count = atl_buffers;
+	isp1362_hcd->atl_queue.blk_size = atl_blksize;
+	isp1362_hcd->atl_queue.buf_avail = isp1362_hcd->atl_queue.buf_count;
+	isp1362_hcd->atl_queue.skip_map = ~0;
+	INIT_LIST_HEAD(&isp1362_hcd->atl_queue.active);
+
+	isp1362_write_reg16(isp1362_hcd, HCATLBUFSZ,
+			    isp1362_hcd->atl_queue.buf_size);
+	isp1362_write_reg16(isp1362_hcd, HCATLBLKSZ,
+			    isp1362_hcd->atl_queue.blk_size - PTD_HEADER_SIZE);
+	isp1362_write_reg32(isp1362_hcd, HCATLSKIP, ~0);
+	isp1362_write_reg32(isp1362_hcd, HCATLLAST,
+			    1 << (atl_buffers - 1));
+
+	snprintf(isp1362_hcd->atl_queue.name,
+		 sizeof(isp1362_hcd->atl_queue.name), "ATL");
+	snprintf(isp1362_hcd->intl_queue.name,
+		 sizeof(isp1362_hcd->intl_queue.name), "INTL");
+	DBG(3, "%s: %5s buf $%04x %2d * %4d = %4d\n", __func__,
+	     isp1362_hcd->intl_queue.name,
+	     isp1362_hcd->intl_queue.buf_start,
+	     ISP1362_INTL_BUFFERS, isp1362_hcd->intl_queue.blk_size,
+	     isp1362_hcd->intl_queue.buf_size);
+	DBG(3, "%s: %5s buf $%04x %2d * %4d = %4d\n", __func__,
+	     isp1362_hcd->atl_queue.name,
+	     isp1362_hcd->atl_queue.buf_start,
+	     atl_buffers, isp1362_hcd->atl_queue.blk_size,
+	     isp1362_hcd->atl_queue.buf_size);
+
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+
+	return 0;
+}
+
+static int isp1362_hc_reset(struct usb_hcd *hcd)
+{
+	int ret = 0;
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	unsigned long t;
+	unsigned long timeout = 100;
+	unsigned long flags;
+	int clkrdy = 0;
+
+	pr_info("%s:\n", __func__);
+
+	if (isp1362_hcd->board && isp1362_hcd->board->reset) {
+		isp1362_hcd->board->reset(hcd->self.controller, 1);
+		msleep(20);
+		if (isp1362_hcd->board->clock)
+			isp1362_hcd->board->clock(hcd->self.controller, 1);
+		isp1362_hcd->board->reset(hcd->self.controller, 0);
+	} else
+		isp1362_sw_reset(isp1362_hcd);
+
+	/* chip has been reset. First we need to see a clock */
+	t = jiffies + msecs_to_jiffies(timeout);
+	while (!clkrdy && time_before_eq(jiffies, t)) {
+		spin_lock_irqsave(&isp1362_hcd->lock, flags);
+		clkrdy = isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_CLKRDY;
+		spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+		if (!clkrdy)
+			msleep(4);
+	}
+
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+	isp1362_write_reg16(isp1362_hcd, HCuPINT, HCuPINT_CLKRDY);
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+	if (!clkrdy) {
+		pr_err("Clock not ready after %lums\n", timeout);
+		ret = -ENODEV;
+	}
+	return ret;
+}
+
+static void isp1362_hc_stop(struct usb_hcd *hcd)
+{
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	unsigned long flags;
+	u32 tmp;
+
+	pr_info("%s:\n", __func__);
+
+	del_timer_sync(&hcd->rh_timer);
+
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+
+	isp1362_write_reg16(isp1362_hcd, HCuPINTENB, 0);
+
+	/* Switch off power for all ports */
+	tmp = isp1362_read_reg32(isp1362_hcd, HCRHDESCA);
+	tmp &= ~(RH_A_NPS | RH_A_PSM);
+	isp1362_write_reg32(isp1362_hcd, HCRHDESCA, tmp);
+	isp1362_write_reg32(isp1362_hcd, HCRHSTATUS, RH_HS_LPS);
+
+	/* Reset the chip */
+	if (isp1362_hcd->board && isp1362_hcd->board->reset)
+		isp1362_hcd->board->reset(hcd->self.controller, 1);
+	else
+		isp1362_sw_reset(isp1362_hcd);
+
+	if (isp1362_hcd->board && isp1362_hcd->board->clock)
+		isp1362_hcd->board->clock(hcd->self.controller, 0);
+
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+}
+
+#ifdef CHIP_BUFFER_TEST
+static int isp1362_chip_test(struct isp1362_hcd *isp1362_hcd)
+{
+	int ret = 0;
+	u16 *ref;
+	unsigned long flags;
+
+	ref = kmalloc(2 * ISP1362_BUF_SIZE, GFP_KERNEL);
+	if (ref) {
+		int offset;
+		u16 *tst = &ref[ISP1362_BUF_SIZE / 2];
+
+		for (offset = 0; offset < ISP1362_BUF_SIZE / 2; offset++) {
+			ref[offset] = ~offset;
+			tst[offset] = offset;
+		}
+
+		for (offset = 0; offset < 4; offset++) {
+			int j;
+
+			for (j = 0; j < 8; j++) {
+				spin_lock_irqsave(&isp1362_hcd->lock, flags);
+				isp1362_write_buffer(isp1362_hcd, (u8 *)ref + offset, 0, j);
+				isp1362_read_buffer(isp1362_hcd, (u8 *)tst + offset, 0, j);
+				spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+
+				if (memcmp(ref, tst, j)) {
+					ret = -ENODEV;
+					pr_err("%s: memory check with %d byte offset %d failed\n",
+					    __func__, j, offset);
+					dump_data((u8 *)ref + offset, j);
+					dump_data((u8 *)tst + offset, j);
+				}
+			}
+		}
+
+		spin_lock_irqsave(&isp1362_hcd->lock, flags);
+		isp1362_write_buffer(isp1362_hcd, ref, 0, ISP1362_BUF_SIZE);
+		isp1362_read_buffer(isp1362_hcd, tst, 0, ISP1362_BUF_SIZE);
+		spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+
+		if (memcmp(ref, tst, ISP1362_BUF_SIZE)) {
+			ret = -ENODEV;
+			pr_err("%s: memory check failed\n", __func__);
+			dump_data((u8 *)tst, ISP1362_BUF_SIZE / 2);
+		}
+
+		for (offset = 0; offset < 256; offset++) {
+			int test_size = 0;
+
+			yield();
+
+			memset(tst, 0, ISP1362_BUF_SIZE);
+			spin_lock_irqsave(&isp1362_hcd->lock, flags);
+			isp1362_write_buffer(isp1362_hcd, tst, 0, ISP1362_BUF_SIZE);
+			isp1362_read_buffer(isp1362_hcd, tst, 0, ISP1362_BUF_SIZE);
+			spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+			if (memcmp(tst, tst + (ISP1362_BUF_SIZE / (2 * sizeof(*tst))),
+				   ISP1362_BUF_SIZE / 2)) {
+				pr_err("%s: Failed to clear buffer\n", __func__);
+				dump_data((u8 *)tst, ISP1362_BUF_SIZE);
+				break;
+			}
+			spin_lock_irqsave(&isp1362_hcd->lock, flags);
+			isp1362_write_buffer(isp1362_hcd, ref, offset * 2, PTD_HEADER_SIZE);
+			isp1362_write_buffer(isp1362_hcd, ref + PTD_HEADER_SIZE / sizeof(*ref),
+					     offset * 2 + PTD_HEADER_SIZE, test_size);
+			isp1362_read_buffer(isp1362_hcd, tst, offset * 2,
+					    PTD_HEADER_SIZE + test_size);
+			spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+			if (memcmp(ref, tst, PTD_HEADER_SIZE + test_size)) {
+				dump_data(((u8 *)ref) + offset, PTD_HEADER_SIZE + test_size);
+				dump_data((u8 *)tst, PTD_HEADER_SIZE + test_size);
+				spin_lock_irqsave(&isp1362_hcd->lock, flags);
+				isp1362_read_buffer(isp1362_hcd, tst, offset * 2,
+						    PTD_HEADER_SIZE + test_size);
+				spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+				if (memcmp(ref, tst, PTD_HEADER_SIZE + test_size)) {
+					ret = -ENODEV;
+					pr_err("%s: memory check with offset %02x failed\n",
+					    __func__, offset);
+					break;
+				}
+				pr_warning("%s: memory check with offset %02x ok after second read\n",
+				     __func__, offset);
+			}
+		}
+		kfree(ref);
+	}
+	return ret;
+}
+#endif
+
+static int isp1362_hc_start(struct usb_hcd *hcd)
+{
+	int ret;
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	struct isp1362_platform_data *board = isp1362_hcd->board;
+	u16 hwcfg;
+	u16 chipid;
+	unsigned long flags;
+
+	pr_info("%s:\n", __func__);
+
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+	chipid = isp1362_read_reg16(isp1362_hcd, HCCHIPID);
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+
+	if ((chipid & HCCHIPID_MASK) != HCCHIPID_MAGIC) {
+		pr_err("%s: Invalid chip ID %04x\n", __func__, chipid);
+		return -ENODEV;
+	}
+
+#ifdef CHIP_BUFFER_TEST
+	ret = isp1362_chip_test(isp1362_hcd);
+	if (ret)
+		return -ENODEV;
+#endif
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+	/* clear interrupt status and disable all interrupt sources */
+	isp1362_write_reg16(isp1362_hcd, HCuPINT, 0xff);
+	isp1362_write_reg16(isp1362_hcd, HCuPINTENB, 0);
+
+	/* HW conf */
+	hwcfg = HCHWCFG_INT_ENABLE | HCHWCFG_DBWIDTH(1);
+	if (board->sel15Kres)
+		hwcfg |= HCHWCFG_PULLDOWN_DS2 |
+			((MAX_ROOT_PORTS > 1) ? HCHWCFG_PULLDOWN_DS1 : 0);
+	if (board->clknotstop)
+		hwcfg |= HCHWCFG_CLKNOTSTOP;
+	if (board->oc_enable)
+		hwcfg |= HCHWCFG_ANALOG_OC;
+	if (board->int_act_high)
+		hwcfg |= HCHWCFG_INT_POL;
+	if (board->int_edge_triggered)
+		hwcfg |= HCHWCFG_INT_TRIGGER;
+	if (board->dreq_act_high)
+		hwcfg |= HCHWCFG_DREQ_POL;
+	if (board->dack_act_high)
+		hwcfg |= HCHWCFG_DACK_POL;
+	isp1362_write_reg16(isp1362_hcd, HCHWCFG, hwcfg);
+	isp1362_show_reg(isp1362_hcd, HCHWCFG);
+	isp1362_write_reg16(isp1362_hcd, HCDMACFG, 0);
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+
+	ret = isp1362_mem_config(hcd);
+	if (ret)
+		return ret;
+
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+
+	/* Root hub conf */
+	isp1362_hcd->rhdesca = 0;
+	if (board->no_power_switching)
+		isp1362_hcd->rhdesca |= RH_A_NPS;
+	if (board->power_switching_mode)
+		isp1362_hcd->rhdesca |= RH_A_PSM;
+	if (board->potpg)
+		isp1362_hcd->rhdesca |= (board->potpg << 24) & RH_A_POTPGT;
+	else
+		isp1362_hcd->rhdesca |= (25 << 24) & RH_A_POTPGT;
+
+	isp1362_write_reg32(isp1362_hcd, HCRHDESCA, isp1362_hcd->rhdesca & ~RH_A_OCPM);
+	isp1362_write_reg32(isp1362_hcd, HCRHDESCA, isp1362_hcd->rhdesca | RH_A_OCPM);
+	isp1362_hcd->rhdesca = isp1362_read_reg32(isp1362_hcd, HCRHDESCA);
+
+	isp1362_hcd->rhdescb = RH_B_PPCM;
+	isp1362_write_reg32(isp1362_hcd, HCRHDESCB, isp1362_hcd->rhdescb);
+	isp1362_hcd->rhdescb = isp1362_read_reg32(isp1362_hcd, HCRHDESCB);
+
+	isp1362_read_reg32(isp1362_hcd, HCFMINTVL);
+	isp1362_write_reg32(isp1362_hcd, HCFMINTVL, (FSMP(FI) << 16) | FI);
+	isp1362_write_reg32(isp1362_hcd, HCLSTHRESH, LSTHRESH);
+
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+
+	isp1362_hcd->hc_control = OHCI_USB_OPER;
+	hcd->state = HC_STATE_RUNNING;
+
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+	/* Set up interrupts */
+	isp1362_hcd->intenb = OHCI_INTR_MIE | OHCI_INTR_RHSC | OHCI_INTR_UE;
+	isp1362_hcd->intenb |= OHCI_INTR_RD;
+	isp1362_hcd->irqenb = HCuPINT_OPR | HCuPINT_SUSP;
+	isp1362_write_reg32(isp1362_hcd, HCINTENB, isp1362_hcd->intenb);
+	isp1362_write_reg16(isp1362_hcd, HCuPINTENB, isp1362_hcd->irqenb);
+
+	/* Go operational */
+	isp1362_write_reg32(isp1362_hcd, HCCONTROL, isp1362_hcd->hc_control);
+	/* enable global power */
+	isp1362_write_reg32(isp1362_hcd, HCRHSTATUS, RH_HS_LPSC | RH_HS_DRWE);
+
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct hc_driver isp1362_hc_driver = {
+	.description =		hcd_name,
+	.product_desc =		"ISP1362 Host Controller",
+	.hcd_priv_size =	sizeof(struct isp1362_hcd),
+
+	.irq =			isp1362_irq,
+	.flags =		HCD_USB11 | HCD_MEMORY,
+
+	.reset =		isp1362_hc_reset,
+	.start =		isp1362_hc_start,
+	.stop =			isp1362_hc_stop,
+
+	.urb_enqueue =		isp1362_urb_enqueue,
+	.urb_dequeue =		isp1362_urb_dequeue,
+	.endpoint_disable =	isp1362_endpoint_disable,
+
+	.get_frame_number =	isp1362_get_frame,
+
+	.hub_status_data =	isp1362_hub_status_data,
+	.hub_control =		isp1362_hub_control,
+	.bus_suspend =		isp1362_bus_suspend,
+	.bus_resume =		isp1362_bus_resume,
+};
+
+/*-------------------------------------------------------------------------*/
+
+#define resource_len(r) (((r)->end - (r)->start) + 1)
+
+static int __devexit isp1362_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	struct resource *res;
+
+	remove_debug_file(isp1362_hcd);
+	DBG(0, "%s: Removing HCD\n", __func__);
+	usb_remove_hcd(hcd);
+
+	DBG(0, "%s: Unmapping data_reg @ %08x\n", __func__,
+	    (u32)isp1362_hcd->data_reg);
+	iounmap(isp1362_hcd->data_reg);
+
+	DBG(0, "%s: Unmapping addr_reg @ %08x\n", __func__,
+	    (u32)isp1362_hcd->addr_reg);
+	iounmap(isp1362_hcd->addr_reg);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	DBG(0, "%s: release mem_region: %08lx\n", __func__, (long unsigned int)res->start);
+	if (res)
+		release_mem_region(res->start, resource_len(res));
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	DBG(0, "%s: release mem_region: %08lx\n", __func__, (long unsigned int)res->start);
+	if (res)
+		release_mem_region(res->start, resource_len(res));
+
+	DBG(0, "%s: put_hcd\n", __func__);
+	usb_put_hcd(hcd);
+	DBG(0, "%s: Done\n", __func__);
+
+	return 0;
+}
+
+static int __init isp1362_probe(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd;
+	struct isp1362_hcd *isp1362_hcd;
+	struct resource *addr, *data;
+	void __iomem *addr_reg;
+	void __iomem *data_reg;
+	int irq;
+	int retval = 0;
+
+	/* basic sanity checks first.  board-specific init logic should
+	 * have initialized this the three resources and probably board
+	 * specific platform_data.  we don't probe for IRQs, and do only
+	 * minimal sanity checking.
+	 */
+	if (pdev->num_resources < 3) {
+		retval = -ENODEV;
+		goto err1;
+	}
+
+	data = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	addr = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	irq = platform_get_irq(pdev, 0);
+	if (!addr || !data || irq < 0) {
+		retval = -ENODEV;
+		goto err1;
+	}
+
+#ifdef CONFIG_USB_HCD_DMA
+	if (pdev->dev.dma_mask) {
+		struct resource *dma_res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+
+		if (!dma_res) {
+			retval = -ENODEV;
+			goto err1;
+		}
+		isp1362_hcd->data_dma = dma_res->start;
+		isp1362_hcd->max_dma_size = resource_len(dma_res);
+	}
+#else
+	if (pdev->dev.dma_mask) {
+		DBG(1, "won't do DMA");
+		retval = -ENODEV;
+		goto err1;
+	}
+#endif
+
+	if (!request_mem_region(addr->start, resource_len(addr), hcd_name)) {
+		retval = -EBUSY;
+		goto err1;
+	}
+	addr_reg = ioremap(addr->start, resource_len(addr));
+	if (addr_reg == NULL) {
+		retval = -ENOMEM;
+		goto err2;
+	}
+
+	if (!request_mem_region(data->start, resource_len(data), hcd_name)) {
+		retval = -EBUSY;
+		goto err3;
+	}
+	data_reg = ioremap(data->start, resource_len(data));
+	if (data_reg == NULL) {
+		retval = -ENOMEM;
+		goto err4;
+	}
+
+	/* allocate and initialize hcd */
+	hcd = usb_create_hcd(&isp1362_hc_driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto err5;
+	}
+	hcd->rsrc_start = data->start;
+	isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	isp1362_hcd->data_reg = data_reg;
+	isp1362_hcd->addr_reg = addr_reg;
+
+	isp1362_hcd->next_statechange = jiffies;
+	spin_lock_init(&isp1362_hcd->lock);
+	INIT_LIST_HEAD(&isp1362_hcd->async);
+	INIT_LIST_HEAD(&isp1362_hcd->periodic);
+	INIT_LIST_HEAD(&isp1362_hcd->isoc);
+	INIT_LIST_HEAD(&isp1362_hcd->remove_list);
+	isp1362_hcd->board = pdev->dev.platform_data;
+#if USE_PLATFORM_DELAY
+	if (!isp1362_hcd->board->delay) {
+		dev_err(hcd->self.controller, "No platform delay function given\n");
+		retval = -ENODEV;
+		goto err6;
+	}
+#endif
+
+#ifdef CONFIG_ARM
+	if (isp1362_hcd->board)
+		set_irq_type(irq, isp1362_hcd->board->int_act_high ? IRQT_RISING : IRQT_FALLING);
+#endif
+
+	retval = usb_add_hcd(hcd, irq, IRQF_TRIGGER_LOW | IRQF_DISABLED | IRQF_SHARED);
+	if (retval != 0)
+		goto err6;
+	pr_info("%s, irq %d\n", hcd->product_desc, irq);
+
+	create_debug_file(isp1362_hcd);
+
+	return 0;
+
+ err6:
+	DBG(0, "%s: Freeing dev %08x\n", __func__, (u32)isp1362_hcd);
+	usb_put_hcd(hcd);
+ err5:
+	DBG(0, "%s: Unmapping data_reg @ %08x\n", __func__, (u32)data_reg);
+	iounmap(data_reg);
+ err4:
+	DBG(0, "%s: Releasing mem region %08lx\n", __func__, (long unsigned int)data->start);
+	release_mem_region(data->start, resource_len(data));
+ err3:
+	DBG(0, "%s: Unmapping addr_reg @ %08x\n", __func__, (u32)addr_reg);
+	iounmap(addr_reg);
+ err2:
+	DBG(0, "%s: Releasing mem region %08lx\n", __func__, (long unsigned int)addr->start);
+	release_mem_region(addr->start, resource_len(addr));
+ err1:
+	pr_err("%s: init error, %d\n", __func__, retval);
+
+	return retval;
+}
+
+#ifdef	CONFIG_PM
+static int isp1362_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	unsigned long flags;
+	int retval = 0;
+
+	DBG(0, "%s: Suspending device\n", __func__);
+
+	if (state.event == PM_EVENT_FREEZE) {
+		DBG(0, "%s: Suspending root hub\n", __func__);
+		retval = isp1362_bus_suspend(hcd);
+	} else {
+		DBG(0, "%s: Suspending RH ports\n", __func__);
+		spin_lock_irqsave(&isp1362_hcd->lock, flags);
+		isp1362_write_reg32(isp1362_hcd, HCRHSTATUS, RH_HS_LPS);
+		spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+	}
+	if (retval == 0)
+		pdev->dev.power.power_state = state;
+	return retval;
+}
+
+static int isp1362_resume(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	unsigned long flags;
+
+	DBG(0, "%s: Resuming\n", __func__);
+
+	if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
+		DBG(0, "%s: Resume RH ports\n", __func__);
+		spin_lock_irqsave(&isp1362_hcd->lock, flags);
+		isp1362_write_reg32(isp1362_hcd, HCRHSTATUS, RH_HS_LPSC);
+		spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+		return 0;
+	}
+
+	pdev->dev.power.power_state = PMSG_ON;
+
+	return isp1362_bus_resume(isp1362_hcd_to_hcd(isp1362_hcd));
+}
+#else
+#define	isp1362_suspend	NULL
+#define	isp1362_resume	NULL
+#endif
+
+static struct platform_driver isp1362_driver = {
+	.probe = isp1362_probe,
+	.remove = __devexit_p(isp1362_remove),
+
+	.suspend = isp1362_suspend,
+	.resume = isp1362_resume,
+	.driver = {
+		.name = (char *)hcd_name,
+		.owner = THIS_MODULE,
+	},
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init isp1362_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+	pr_info("driver %s, %s\n", hcd_name, DRIVER_VERSION);
+	return platform_driver_register(&isp1362_driver);
+}
+module_init(isp1362_init);
+
+static void __exit isp1362_cleanup(void)
+{
+	platform_driver_unregister(&isp1362_driver);
+}
+module_exit(isp1362_cleanup);
diff --git a/drivers/usb/host/isp1362.h b/drivers/usb/host/isp1362.h
new file mode 100644
index 000000000000..fe60f62a32f3
--- /dev/null
+++ b/drivers/usb/host/isp1362.h
@@ -0,0 +1,1079 @@
+/*
+ * ISP1362 HCD (Host Controller Driver) for USB.
+ *
+ * COPYRIGHT (C) by L. Wassmann <LW@KARO-electronics.de>
+ */
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Platform specific compile time options
+ */
+#if defined(CONFIG_ARCH_KARO)
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/karo.h>
+
+#define USE_32BIT		1
+
+
+/* These options are mutually eclusive */
+#define USE_PLATFORM_DELAY	1
+#define USE_NDELAY		0
+/*
+ * MAX_ROOT_PORTS: Number of downstream ports
+ *
+ * The chip has two USB ports, one of which can be configured as
+ * an USB device port, so the value of this constant is implementation
+ * specific.
+ */
+#define MAX_ROOT_PORTS		2
+#define DUMMY_DELAY_ACCESS do {} while (0)
+
+/* insert platform specific definitions for other machines here */
+#elif defined(CONFIG_BLACKFIN)
+
+#include <linux/io.h>
+#define USE_32BIT		0
+#define MAX_ROOT_PORTS		2
+#define USE_PLATFORM_DELAY	0
+#define USE_NDELAY		1
+
+#define DUMMY_DELAY_ACCESS \
+	do { \
+		bfin_read16(ASYNC_BANK0_BASE); \
+		bfin_read16(ASYNC_BANK0_BASE); \
+		bfin_read16(ASYNC_BANK0_BASE); \
+	} while (0)
+
+#undef insw
+#undef outsw
+
+#define insw  delayed_insw
+#define outsw  delayed_outsw
+
+static inline void delayed_outsw(unsigned int addr, void *buf, int len)
+{
+	unsigned short *bp = (unsigned short *)buf;
+	while (len--) {
+		DUMMY_DELAY_ACCESS;
+		outw(*bp++, addr);
+	}
+}
+
+static inline void delayed_insw(unsigned int addr, void *buf, int len)
+{
+	unsigned short *bp = (unsigned short *)buf;
+	while (len--) {
+		DUMMY_DELAY_ACCESS;
+		*bp++ = inw((void *)addr);
+	}
+}
+
+#else
+
+#define MAX_ROOT_PORTS		2
+
+#define USE_32BIT		0
+
+/* These options are mutually eclusive */
+#define USE_PLATFORM_DELAY	0
+#define USE_NDELAY		0
+
+#define DUMMY_DELAY_ACCESS do {} while (0)
+
+#endif
+
+
+/* ------------------------------------------------------------------------- */
+
+#define USB_RESET_WIDTH			50
+#define MAX_XFER_SIZE			1023
+
+/* Buffer sizes */
+#define ISP1362_BUF_SIZE		4096
+#define ISP1362_ISTL_BUFSIZE		512
+#define ISP1362_INTL_BLKSIZE		64
+#define ISP1362_INTL_BUFFERS		16
+#define ISP1362_ATL_BLKSIZE		64
+
+#define ISP1362_REG_WRITE_OFFSET	0x80
+
+#ifdef ISP1362_DEBUG
+typedef const unsigned int isp1362_reg_t;
+
+#define REG_WIDTH_16			0x000
+#define REG_WIDTH_32			0x100
+#define REG_WIDTH_MASK			0x100
+#define REG_NO_MASK			0x0ff
+
+#define REG_ACCESS_R			0x200
+#define REG_ACCESS_W			0x400
+#define REG_ACCESS_RW			0x600
+#define REG_ACCESS_MASK			0x600
+
+#define ISP1362_REG_NO(r)		((r) & REG_NO_MASK)
+
+#define _BUG_ON(x)	BUG_ON(x)
+#define _WARN_ON(x)	WARN_ON(x)
+
+#define ISP1362_REG(name, addr, width, rw) \
+static isp1362_reg_t ISP1362_REG_##name = ((addr) | (width) | (rw))
+
+#define REG_ACCESS_TEST(r)   BUG_ON(((r) & ISP1362_REG_WRITE_OFFSET) && !((r) & REG_ACCESS_W))
+#define REG_WIDTH_TEST(r, w) BUG_ON(((r) & REG_WIDTH_MASK) != (w))
+#else
+typedef const unsigned char isp1362_reg_t;
+#define ISP1362_REG_NO(r)		(r)
+#define _BUG_ON(x)			do {} while (0)
+#define _WARN_ON(x)			do {} while (0)
+
+#define ISP1362_REG(name, addr, width, rw) \
+static isp1362_reg_t ISP1362_REG_##name = addr
+
+#define REG_ACCESS_TEST(r)		do {} while (0)
+#define REG_WIDTH_TEST(r, w)		do {} while (0)
+#endif
+
+/* OHCI compatible registers */
+/*
+ * Note: Some of the ISP1362 'OHCI' registers implement only
+ * a subset of the bits defined in the OHCI spec.
+ *
+ * Bitmasks for the individual bits of these registers are defined in "ohci.h"
+ */
+ISP1362_REG(HCREVISION,	0x00,	REG_WIDTH_32,	REG_ACCESS_R);
+ISP1362_REG(HCCONTROL,	0x01,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCCMDSTAT,	0x02,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCINTSTAT,	0x03,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCINTENB,	0x04,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCINTDIS,	0x05,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCFMINTVL,	0x0d,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCFMREM,	0x0e,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCFMNUM,	0x0f,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCLSTHRESH,	0x11,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCRHDESCA,	0x12,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCRHDESCB,	0x13,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCRHSTATUS,	0x14,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCRHPORT1,	0x15,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCRHPORT2,	0x16,	REG_WIDTH_32,	REG_ACCESS_RW);
+
+/* Philips ISP1362 specific registers */
+ISP1362_REG(HCHWCFG,	0x20,	REG_WIDTH_16,	REG_ACCESS_RW);
+#define HCHWCFG_DISABLE_SUSPEND	(1 << 15)
+#define HCHWCFG_GLOBAL_PWRDOWN	(1 << 14)
+#define HCHWCFG_PULLDOWN_DS2	(1 << 13)
+#define HCHWCFG_PULLDOWN_DS1	(1 << 12)
+#define HCHWCFG_CLKNOTSTOP	(1 << 11)
+#define HCHWCFG_ANALOG_OC	(1 << 10)
+#define HCHWCFG_ONEINT		(1 << 9)
+#define HCHWCFG_DACK_MODE	(1 << 8)
+#define HCHWCFG_ONEDMA		(1 << 7)
+#define HCHWCFG_DACK_POL	(1 << 6)
+#define HCHWCFG_DREQ_POL	(1 << 5)
+#define HCHWCFG_DBWIDTH_MASK	(0x03 << 3)
+#define HCHWCFG_DBWIDTH(n)	(((n) << 3) & HCHWCFG_DBWIDTH_MASK)
+#define HCHWCFG_INT_POL		(1 << 2)
+#define HCHWCFG_INT_TRIGGER	(1 << 1)
+#define HCHWCFG_INT_ENABLE	(1 << 0)
+
+ISP1362_REG(HCDMACFG,	0x21,	REG_WIDTH_16,	REG_ACCESS_RW);
+#define HCDMACFG_CTR_ENABLE	(1 << 7)
+#define HCDMACFG_BURST_LEN_MASK	(0x03 << 5)
+#define HCDMACFG_BURST_LEN(n)	(((n) << 5) & HCDMACFG_BURST_LEN_MASK)
+#define HCDMACFG_BURST_LEN_1	HCDMACFG_BURST_LEN(0)
+#define HCDMACFG_BURST_LEN_4	HCDMACFG_BURST_LEN(1)
+#define HCDMACFG_BURST_LEN_8	HCDMACFG_BURST_LEN(2)
+#define HCDMACFG_DMA_ENABLE	(1 << 4)
+#define HCDMACFG_BUF_TYPE_MASK	(0x07 << 1)
+#define HCDMACFG_BUF_TYPE(n)	(((n) << 1) & HCDMACFG_BUF_TYPE_MASK)
+#define HCDMACFG_BUF_ISTL0	HCDMACFG_BUF_TYPE(0)
+#define HCDMACFG_BUF_ISTL1	HCDMACFG_BUF_TYPE(1)
+#define HCDMACFG_BUF_INTL	HCDMACFG_BUF_TYPE(2)
+#define HCDMACFG_BUF_ATL	HCDMACFG_BUF_TYPE(3)
+#define HCDMACFG_BUF_DIRECT	HCDMACFG_BUF_TYPE(4)
+#define HCDMACFG_DMA_RW_SELECT	(1 << 0)
+
+ISP1362_REG(HCXFERCTR,	0x22,	REG_WIDTH_16,	REG_ACCESS_RW);
+
+ISP1362_REG(HCuPINT,	0x24,	REG_WIDTH_16,	REG_ACCESS_RW);
+#define HCuPINT_SOF		(1 << 0)
+#define HCuPINT_ISTL0		(1 << 1)
+#define HCuPINT_ISTL1		(1 << 2)
+#define HCuPINT_EOT		(1 << 3)
+#define HCuPINT_OPR		(1 << 4)
+#define HCuPINT_SUSP		(1 << 5)
+#define HCuPINT_CLKRDY		(1 << 6)
+#define HCuPINT_INTL		(1 << 7)
+#define HCuPINT_ATL		(1 << 8)
+#define HCuPINT_OTG		(1 << 9)
+
+ISP1362_REG(HCuPINTENB,	0x25,	REG_WIDTH_16,	REG_ACCESS_RW);
+/* same bit definitions apply as for HCuPINT */
+
+ISP1362_REG(HCCHIPID,	0x27,	REG_WIDTH_16,	REG_ACCESS_R);
+#define HCCHIPID_MASK		0xff00
+#define HCCHIPID_MAGIC		0x3600
+
+ISP1362_REG(HCSCRATCH,	0x28,	REG_WIDTH_16,	REG_ACCESS_RW);
+
+ISP1362_REG(HCSWRES,	0x29,	REG_WIDTH_16,	REG_ACCESS_W);
+#define HCSWRES_MAGIC		0x00f6
+
+ISP1362_REG(HCBUFSTAT,	0x2c,	REG_WIDTH_16,	REG_ACCESS_RW);
+#define HCBUFSTAT_ISTL0_FULL	(1 << 0)
+#define HCBUFSTAT_ISTL1_FULL	(1 << 1)
+#define HCBUFSTAT_INTL_ACTIVE	(1 << 2)
+#define HCBUFSTAT_ATL_ACTIVE	(1 << 3)
+#define HCBUFSTAT_RESET_HWPP	(1 << 4)
+#define HCBUFSTAT_ISTL0_ACTIVE	(1 << 5)
+#define HCBUFSTAT_ISTL1_ACTIVE	(1 << 6)
+#define HCBUFSTAT_ISTL0_DONE	(1 << 8)
+#define HCBUFSTAT_ISTL1_DONE	(1 << 9)
+#define HCBUFSTAT_PAIRED_PTDPP	(1 << 10)
+
+ISP1362_REG(HCDIRADDR,	0x32,	REG_WIDTH_32,	REG_ACCESS_RW);
+#define HCDIRADDR_ADDR_MASK	0x0000ffff
+#define HCDIRADDR_ADDR(n)	(((n) << 0) & HCDIRADDR_ADDR_MASK)
+#define HCDIRADDR_COUNT_MASK	0xffff0000
+#define HCDIRADDR_COUNT(n)	(((n) << 16) & HCDIRADDR_COUNT_MASK)
+ISP1362_REG(HCDIRDATA,	0x45,	REG_WIDTH_16,	REG_ACCESS_RW);
+
+ISP1362_REG(HCISTLBUFSZ, 0x30,	REG_WIDTH_16,	REG_ACCESS_RW);
+ISP1362_REG(HCISTL0PORT, 0x40,	REG_WIDTH_16,	REG_ACCESS_RW);
+ISP1362_REG(HCISTL1PORT, 0x42,	REG_WIDTH_16,	REG_ACCESS_RW);
+ISP1362_REG(HCISTLRATE,	0x47,	REG_WIDTH_16,	REG_ACCESS_RW);
+
+ISP1362_REG(HCINTLBUFSZ, 0x33,	REG_WIDTH_16,	REG_ACCESS_RW);
+ISP1362_REG(HCINTLPORT,	0x43,	REG_WIDTH_16,	REG_ACCESS_RW);
+ISP1362_REG(HCINTLBLKSZ, 0x53,	REG_WIDTH_16,	REG_ACCESS_RW);
+ISP1362_REG(HCINTLDONE,	0x17,	REG_WIDTH_32,	REG_ACCESS_R);
+ISP1362_REG(HCINTLSKIP,	0x18,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCINTLLAST,	0x19,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCINTLCURR,	0x1a,	REG_WIDTH_16,	REG_ACCESS_R);
+
+ISP1362_REG(HCATLBUFSZ, 0x34,	REG_WIDTH_16,	REG_ACCESS_RW);
+ISP1362_REG(HCATLPORT,	0x44,	REG_WIDTH_16,	REG_ACCESS_RW);
+ISP1362_REG(HCATLBLKSZ, 0x54,	REG_WIDTH_16,	REG_ACCESS_RW);
+ISP1362_REG(HCATLDONE,	0x1b,	REG_WIDTH_32,	REG_ACCESS_R);
+ISP1362_REG(HCATLSKIP,	0x1c,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCATLLAST,	0x1d,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCATLCURR,	0x1e,	REG_WIDTH_16,	REG_ACCESS_R);
+
+ISP1362_REG(HCATLDTC,	0x51,	REG_WIDTH_16,	REG_ACCESS_RW);
+ISP1362_REG(HCATLDTCTO,	0x52,	REG_WIDTH_16,	REG_ACCESS_RW);
+
+
+ISP1362_REG(OTGCONTROL,	0x62,	REG_WIDTH_16,	REG_ACCESS_RW);
+ISP1362_REG(OTGSTATUS,	0x67,	REG_WIDTH_16,	REG_ACCESS_R);
+ISP1362_REG(OTGINT,	0x68,	REG_WIDTH_16,	REG_ACCESS_RW);
+ISP1362_REG(OTGINTENB,	0x69,	REG_WIDTH_16,	REG_ACCESS_RW);
+ISP1362_REG(OTGTIMER,	0x6A,	REG_WIDTH_16,	REG_ACCESS_RW);
+ISP1362_REG(OTGALTTMR,	0x6C,	REG_WIDTH_16,	REG_ACCESS_RW);
+
+/* Philips transfer descriptor, cpu-endian */
+struct ptd {
+	u16 count;
+#define	PTD_COUNT_MSK	(0x3ff << 0)
+#define	PTD_TOGGLE_MSK	(1 << 10)
+#define	PTD_ACTIVE_MSK	(1 << 11)
+#define	PTD_CC_MSK	(0xf << 12)
+	u16 mps;
+#define	PTD_MPS_MSK	(0x3ff << 0)
+#define	PTD_SPD_MSK	(1 << 10)
+#define	PTD_LAST_MSK	(1 << 11)
+#define	PTD_EP_MSK	(0xf << 12)
+	u16 len;
+#define	PTD_LEN_MSK	(0x3ff << 0)
+#define	PTD_DIR_MSK	(3 << 10)
+#define	PTD_DIR_SETUP	(0)
+#define	PTD_DIR_OUT	(1)
+#define	PTD_DIR_IN	(2)
+	u16 faddr;
+#define	PTD_FA_MSK	(0x7f << 0)
+/* PTD Byte 7: [StartingFrame (if ISO PTD) | StartingFrame[0..4], PollingRate[0..2] (if INT PTD)] */
+#define PTD_SF_ISO_MSK	(0xff << 8)
+#define PTD_SF_INT_MSK	(0x1f << 8)
+#define PTD_PR_MSK	(0x07 << 13)
+} __attribute__ ((packed, aligned(2)));
+#define PTD_HEADER_SIZE sizeof(struct ptd)
+
+/* ------------------------------------------------------------------------- */
+/* Copied from ohci.h: */
+/*
+ * Hardware transfer status codes -- CC from PTD
+ */
+#define PTD_CC_NOERROR      0x00
+#define PTD_CC_CRC          0x01
+#define PTD_CC_BITSTUFFING  0x02
+#define PTD_CC_DATATOGGLEM  0x03
+#define PTD_CC_STALL        0x04
+#define PTD_DEVNOTRESP      0x05
+#define PTD_PIDCHECKFAIL    0x06
+#define PTD_UNEXPECTEDPID   0x07
+#define PTD_DATAOVERRUN     0x08
+#define PTD_DATAUNDERRUN    0x09
+    /* 0x0A, 0x0B reserved for hardware */
+#define PTD_BUFFEROVERRUN   0x0C
+#define PTD_BUFFERUNDERRUN  0x0D
+    /* 0x0E, 0x0F reserved for HCD */
+#define PTD_NOTACCESSED     0x0F
+
+
+/* map OHCI TD status codes (CC) to errno values */
+static const int cc_to_error[16] = {
+	/* No  Error  */               0,
+	/* CRC Error  */               -EILSEQ,
+	/* Bit Stuff  */               -EPROTO,
+	/* Data Togg  */               -EILSEQ,
+	/* Stall      */               -EPIPE,
+	/* DevNotResp */               -ETIMEDOUT,
+	/* PIDCheck   */               -EPROTO,
+	/* UnExpPID   */               -EPROTO,
+	/* DataOver   */               -EOVERFLOW,
+	/* DataUnder  */               -EREMOTEIO,
+	/* (for hw)   */               -EIO,
+	/* (for hw)   */               -EIO,
+	/* BufferOver */               -ECOMM,
+	/* BuffUnder  */               -ENOSR,
+	/* (for HCD)  */               -EALREADY,
+	/* (for HCD)  */               -EALREADY
+};
+
+
+/*
+ * HcControl (control) register masks
+ */
+#define OHCI_CTRL_HCFS	(3 << 6)	/* host controller functional state */
+#define OHCI_CTRL_RWC	(1 << 9)	/* remote wakeup connected */
+#define OHCI_CTRL_RWE	(1 << 10)	/* remote wakeup enable */
+
+/* pre-shifted values for HCFS */
+#	define OHCI_USB_RESET	(0 << 6)
+#	define OHCI_USB_RESUME	(1 << 6)
+#	define OHCI_USB_OPER	(2 << 6)
+#	define OHCI_USB_SUSPEND	(3 << 6)
+
+/*
+ * HcCommandStatus (cmdstatus) register masks
+ */
+#define OHCI_HCR	(1 << 0)	/* host controller reset */
+#define OHCI_SOC  	(3 << 16)	/* scheduling overrun count */
+
+/*
+ * masks used with interrupt registers:
+ * HcInterruptStatus (intrstatus)
+ * HcInterruptEnable (intrenable)
+ * HcInterruptDisable (intrdisable)
+ */
+#define OHCI_INTR_SO	(1 << 0)	/* scheduling overrun */
+#define OHCI_INTR_WDH	(1 << 1)	/* writeback of done_head */
+#define OHCI_INTR_SF	(1 << 2)	/* start frame */
+#define OHCI_INTR_RD	(1 << 3)	/* resume detect */
+#define OHCI_INTR_UE	(1 << 4)	/* unrecoverable error */
+#define OHCI_INTR_FNO	(1 << 5)	/* frame number overflow */
+#define OHCI_INTR_RHSC	(1 << 6)	/* root hub status change */
+#define OHCI_INTR_OC	(1 << 30)	/* ownership change */
+#define OHCI_INTR_MIE	(1 << 31)	/* master interrupt enable */
+
+/* roothub.portstatus [i] bits */
+#define RH_PS_CCS            0x00000001   	/* current connect status */
+#define RH_PS_PES            0x00000002   	/* port enable status*/
+#define RH_PS_PSS            0x00000004   	/* port suspend status */
+#define RH_PS_POCI           0x00000008   	/* port over current indicator */
+#define RH_PS_PRS            0x00000010  	/* port reset status */
+#define RH_PS_PPS            0x00000100   	/* port power status */
+#define RH_PS_LSDA           0x00000200    	/* low speed device attached */
+#define RH_PS_CSC            0x00010000 	/* connect status change */
+#define RH_PS_PESC           0x00020000   	/* port enable status change */
+#define RH_PS_PSSC           0x00040000    	/* port suspend status change */
+#define RH_PS_OCIC           0x00080000    	/* over current indicator change */
+#define RH_PS_PRSC           0x00100000   	/* port reset status change */
+
+/* roothub.status bits */
+#define RH_HS_LPS	     0x00000001		/* local power status */
+#define RH_HS_OCI	     0x00000002		/* over current indicator */
+#define RH_HS_DRWE	     0x00008000		/* device remote wakeup enable */
+#define RH_HS_LPSC	     0x00010000		/* local power status change */
+#define RH_HS_OCIC	     0x00020000		/* over current indicator change */
+#define RH_HS_CRWE	     0x80000000		/* clear remote wakeup enable */
+
+/* roothub.b masks */
+#define RH_B_DR		0x0000ffff		/* device removable flags */
+#define RH_B_PPCM	0xffff0000		/* port power control mask */
+
+/* roothub.a masks */
+#define	RH_A_NDP	(0xff << 0)		/* number of downstream ports */
+#define	RH_A_PSM	(1 << 8)		/* power switching mode */
+#define	RH_A_NPS	(1 << 9)		/* no power switching */
+#define	RH_A_DT		(1 << 10)		/* device type (mbz) */
+#define	RH_A_OCPM	(1 << 11)		/* over current protection mode */
+#define	RH_A_NOCP	(1 << 12)		/* no over current protection */
+#define	RH_A_POTPGT	(0xff << 24)		/* power on to power good time */
+
+#define	FI			0x2edf		/* 12000 bits per frame (-1) */
+#define	FSMP(fi) 		(0x7fff & ((6 * ((fi) - 210)) / 7))
+#define LSTHRESH		0x628		/* lowspeed bit threshold */
+
+/* ------------------------------------------------------------------------- */
+
+/* PTD accessor macros. */
+#define PTD_GET_COUNT(p)	(((p)->count & PTD_COUNT_MSK) >> 0)
+#define PTD_COUNT(v)		(((v) << 0) & PTD_COUNT_MSK)
+#define PTD_GET_TOGGLE(p)	(((p)->count & PTD_TOGGLE_MSK) >> 10)
+#define PTD_TOGGLE(v)		(((v) << 10) & PTD_TOGGLE_MSK)
+#define PTD_GET_ACTIVE(p)	(((p)->count & PTD_ACTIVE_MSK) >> 11)
+#define PTD_ACTIVE(v)		(((v) << 11) & PTD_ACTIVE_MSK)
+#define PTD_GET_CC(p)		(((p)->count & PTD_CC_MSK) >> 12)
+#define PTD_CC(v)		(((v) << 12) & PTD_CC_MSK)
+#define PTD_GET_MPS(p)		(((p)->mps & PTD_MPS_MSK) >> 0)
+#define PTD_MPS(v)		(((v) << 0) & PTD_MPS_MSK)
+#define PTD_GET_SPD(p)		(((p)->mps & PTD_SPD_MSK) >> 10)
+#define PTD_SPD(v)		(((v) << 10) & PTD_SPD_MSK)
+#define PTD_GET_LAST(p)		(((p)->mps & PTD_LAST_MSK) >> 11)
+#define PTD_LAST(v)		(((v) << 11) & PTD_LAST_MSK)
+#define PTD_GET_EP(p)		(((p)->mps & PTD_EP_MSK) >> 12)
+#define PTD_EP(v)		(((v) << 12) & PTD_EP_MSK)
+#define PTD_GET_LEN(p)		(((p)->len & PTD_LEN_MSK) >> 0)
+#define PTD_LEN(v)		(((v) << 0) & PTD_LEN_MSK)
+#define PTD_GET_DIR(p)		(((p)->len & PTD_DIR_MSK) >> 10)
+#define PTD_DIR(v)		(((v) << 10) & PTD_DIR_MSK)
+#define PTD_GET_FA(p)		(((p)->faddr & PTD_FA_MSK) >> 0)
+#define PTD_FA(v)		(((v) << 0) & PTD_FA_MSK)
+#define PTD_GET_SF_INT(p)	(((p)->faddr & PTD_SF_INT_MSK) >> 8)
+#define PTD_SF_INT(v)		(((v) << 8) & PTD_SF_INT_MSK)
+#define PTD_GET_SF_ISO(p)	(((p)->faddr & PTD_SF_ISO_MSK) >> 8)
+#define PTD_SF_ISO(v)		(((v) << 8) & PTD_SF_ISO_MSK)
+#define PTD_GET_PR(p)		(((p)->faddr & PTD_PR_MSK) >> 13)
+#define PTD_PR(v)		(((v) << 13) & PTD_PR_MSK)
+
+#define	LOG2_PERIODIC_SIZE	5	/* arbitrary; this matches OHCI */
+#define	PERIODIC_SIZE		(1 << LOG2_PERIODIC_SIZE)
+
+struct isp1362_ep {
+	struct usb_host_endpoint *hep;
+	struct usb_device	*udev;
+
+	/* philips transfer descriptor */
+	struct ptd		ptd;
+
+	u8			maxpacket;
+	u8			epnum;
+	u8			nextpid;
+	u16			error_count;
+	u16			length;		/* of current packet */
+	s16			ptd_offset;	/* buffer offset in ISP1362 where
+						   PTD has been stored
+						   (for access thru HCDIRDATA) */
+	int			ptd_index;
+	int num_ptds;
+	void 			*data;		/* to databuf */
+	/* queue of active EPs (the ones transmitted to the chip) */
+	struct list_head	active;
+
+	/* periodic schedule */
+	u8			branch;
+	u16			interval;
+	u16			load;
+	u16			last_iso;
+
+	/* async schedule */
+	struct list_head	schedule;	/* list of all EPs that need processing */
+	struct list_head	remove_list;
+	int			num_req;
+};
+
+struct isp1362_ep_queue {
+	struct list_head	active;		/* list of PTDs currently processed by HC */
+	atomic_t		finishing;
+	unsigned long		buf_map;
+	unsigned long		skip_map;
+	int			free_ptd;
+	u16			buf_start;
+	u16			buf_size;
+	u16			blk_size;	/* PTD buffer block size for ATL and INTL */
+	u8			buf_count;
+	u8			buf_avail;
+	char			name[16];
+
+	/* for statistical tracking */
+	u8			stat_maxptds;	/* Max # of ptds seen simultaneously in fifo */
+	u8			ptd_count;	/* number of ptds submitted to this queue */
+};
+
+struct isp1362_hcd {
+	spinlock_t		lock;
+	void __iomem		*addr_reg;
+	void __iomem		*data_reg;
+
+	struct isp1362_platform_data *board;
+
+	struct proc_dir_entry	*pde;
+	unsigned long		stat1, stat2, stat4, stat8, stat16;
+
+	/* HC registers */
+	u32			intenb;		/* "OHCI" interrupts */
+	u16			irqenb;		/* uP interrupts */
+
+	/* Root hub registers */
+	u32			rhdesca;
+	u32			rhdescb;
+	u32			rhstatus;
+	u32			rhport[MAX_ROOT_PORTS];
+	unsigned long		next_statechange;
+
+	/* HC control reg shadow copy */
+	u32			hc_control;
+
+	/* async schedule: control, bulk */
+	struct list_head	async;
+
+	/* periodic schedule: int */
+	u16			load[PERIODIC_SIZE];
+	struct list_head	periodic;
+	u16			fmindex;
+
+	/* periodic schedule: isochronous */
+	struct list_head	isoc;
+	int			istl_flip:1;
+	int			irq_active:1;
+
+	/* Schedules for the current frame */
+	struct isp1362_ep_queue atl_queue;
+	struct isp1362_ep_queue intl_queue;
+	struct isp1362_ep_queue istl_queue[2];
+
+	/* list of PTDs retrieved from HC */
+	struct list_head	remove_list;
+	enum {
+		ISP1362_INT_SOF,
+		ISP1362_INT_ISTL0,
+		ISP1362_INT_ISTL1,
+		ISP1362_INT_EOT,
+		ISP1362_INT_OPR,
+		ISP1362_INT_SUSP,
+		ISP1362_INT_CLKRDY,
+		ISP1362_INT_INTL,
+		ISP1362_INT_ATL,
+		ISP1362_INT_OTG,
+		NUM_ISP1362_IRQS
+	} IRQ_NAMES;
+	unsigned int		irq_stat[NUM_ISP1362_IRQS];
+	int			req_serial;
+};
+
+static inline const char *ISP1362_INT_NAME(int n)
+{
+	switch (n) {
+	case ISP1362_INT_SOF:    return "SOF";
+	case ISP1362_INT_ISTL0:  return "ISTL0";
+	case ISP1362_INT_ISTL1:  return "ISTL1";
+	case ISP1362_INT_EOT:    return "EOT";
+	case ISP1362_INT_OPR:    return "OPR";
+	case ISP1362_INT_SUSP:   return "SUSP";
+	case ISP1362_INT_CLKRDY: return "CLKRDY";
+	case ISP1362_INT_INTL:   return "INTL";
+	case ISP1362_INT_ATL:    return "ATL";
+	case ISP1362_INT_OTG:    return "OTG";
+	default:                 return "unknown";
+	}
+}
+
+static inline void ALIGNSTAT(struct isp1362_hcd *isp1362_hcd, void *ptr)
+{
+	unsigned p = (unsigned)ptr;
+	if (!(p & 0xf))
+		isp1362_hcd->stat16++;
+	else if (!(p & 0x7))
+		isp1362_hcd->stat8++;
+	else if (!(p & 0x3))
+		isp1362_hcd->stat4++;
+	else if (!(p & 0x1))
+		isp1362_hcd->stat2++;
+	else
+		isp1362_hcd->stat1++;
+}
+
+static inline struct isp1362_hcd *hcd_to_isp1362_hcd(struct usb_hcd *hcd)
+{
+	return (struct isp1362_hcd *) (hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *isp1362_hcd_to_hcd(struct isp1362_hcd *isp1362_hcd)
+{
+	return container_of((void *)isp1362_hcd, struct usb_hcd, hcd_priv);
+}
+
+#define frame_before(f1, f2)	((s16)((u16)f1 - (u16)f2) < 0)
+
+/*
+ * ISP1362 HW Interface
+ */
+
+#ifdef ISP1362_DEBUG
+#define DBG(level, fmt...) \
+	do { \
+		if (dbg_level > level) \
+			pr_debug(fmt); \
+	} while (0)
+#define _DBG(level, fmt...)	\
+	do { \
+		if (dbg_level > level) \
+			printk(fmt); \
+	} while (0)
+#else
+#define DBG(fmt...)		do {} while (0)
+#define _DBG DBG
+#endif
+
+#ifdef VERBOSE
+#    define VDBG(fmt...)	DBG(3, fmt)
+#else
+#    define VDBG(fmt...)	do {} while (0)
+#endif
+
+#ifdef REGISTERS
+#    define RDBG(fmt...)	DBG(1, fmt)
+#else
+#    define RDBG(fmt...)	do {} while (0)
+#endif
+
+#ifdef URB_TRACE
+#define URB_DBG(fmt...)		DBG(0, fmt)
+#else
+#define URB_DBG(fmt...)		do {} while (0)
+#endif
+
+
+#if USE_PLATFORM_DELAY
+#if USE_NDELAY
+#error USE_PLATFORM_DELAY and USE_NDELAY defined simultaneously.
+#endif
+#define	isp1362_delay(h, d)	(h)->board->delay(isp1362_hcd_to_hcd(h)->self.controller, d)
+#elif USE_NDELAY
+#define	isp1362_delay(h, d)	ndelay(d)
+#else
+#define	isp1362_delay(h, d)	do {} while (0)
+#endif
+
+#define get_urb(ep) ({							\
+	BUG_ON(list_empty(&ep->hep->urb_list));				\
+	container_of(ep->hep->urb_list.next, struct urb, urb_list);	\
+})
+
+/* basic access functions for ISP1362 chip registers */
+/* NOTE: The contents of the address pointer register cannot be read back! The driver must ensure,
+ * that all register accesses are performed with interrupts disabled, since the interrupt
+ * handler has no way of restoring the previous state.
+ */
+static void isp1362_write_addr(struct isp1362_hcd *isp1362_hcd, isp1362_reg_t reg)
+{
+	/*_BUG_ON((reg & ISP1362_REG_WRITE_OFFSET) && !(reg & REG_ACCESS_W));*/
+	REG_ACCESS_TEST(reg);
+	_BUG_ON(!irqs_disabled());
+	DUMMY_DELAY_ACCESS;
+	writew(ISP1362_REG_NO(reg), isp1362_hcd->addr_reg);
+	DUMMY_DELAY_ACCESS;
+	isp1362_delay(isp1362_hcd, 1);
+}
+
+static void isp1362_write_data16(struct isp1362_hcd *isp1362_hcd, u16 val)
+{
+	_BUG_ON(!irqs_disabled());
+	DUMMY_DELAY_ACCESS;
+	writew(val, isp1362_hcd->data_reg);
+}
+
+static u16 isp1362_read_data16(struct isp1362_hcd *isp1362_hcd)
+{
+	u16 val;
+
+	_BUG_ON(!irqs_disabled());
+	DUMMY_DELAY_ACCESS;
+	val = readw(isp1362_hcd->data_reg);
+
+	return val;
+}
+
+static void isp1362_write_data32(struct isp1362_hcd *isp1362_hcd, u32 val)
+{
+	_BUG_ON(!irqs_disabled());
+#if USE_32BIT
+	DUMMY_DELAY_ACCESS;
+	writel(val, isp1362_hcd->data_reg);
+#else
+	DUMMY_DELAY_ACCESS;
+	writew((u16)val, isp1362_hcd->data_reg);
+	DUMMY_DELAY_ACCESS;
+	writew(val >> 16, isp1362_hcd->data_reg);
+#endif
+}
+
+static u32 isp1362_read_data32(struct isp1362_hcd *isp1362_hcd)
+{
+	u32 val;
+
+	_BUG_ON(!irqs_disabled());
+#if USE_32BIT
+	DUMMY_DELAY_ACCESS;
+	val = readl(isp1362_hcd->data_reg);
+#else
+	DUMMY_DELAY_ACCESS;
+	val = (u32)readw(isp1362_hcd->data_reg);
+	DUMMY_DELAY_ACCESS;
+	val |= (u32)readw(isp1362_hcd->data_reg) << 16;
+#endif
+	return val;
+}
+
+/* use readsw/writesw to access the fifo whenever possible */
+/* assume HCDIRDATA or XFERCTR & addr_reg have been set up */
+static void isp1362_read_fifo(struct isp1362_hcd *isp1362_hcd, void *buf, u16 len)
+{
+	u8 *dp = buf;
+	u16 data;
+
+	if (!len)
+		return;
+
+	_BUG_ON(!irqs_disabled());
+
+	RDBG("%s: Reading %d byte from fifo to mem @ %p\n", __func__, len, buf);
+#if USE_32BIT
+	if (len >= 4) {
+		RDBG("%s: Using readsl for %d dwords\n", __func__, len >> 2);
+		readsl(isp1362_hcd->data_reg, dp, len >> 2);
+		dp += len & ~3;
+		len &= 3;
+	}
+#endif
+	if (len >= 2) {
+		RDBG("%s: Using readsw for %d words\n", __func__, len >> 1);
+		insw((unsigned long)isp1362_hcd->data_reg, dp, len >> 1);
+		dp += len & ~1;
+		len &= 1;
+	}
+
+	BUG_ON(len & ~1);
+	if (len > 0) {
+		data = isp1362_read_data16(isp1362_hcd);
+		RDBG("%s: Reading trailing byte %02x to mem @ %08x\n", __func__,
+		     (u8)data, (u32)dp);
+		*dp = (u8)data;
+	}
+}
+
+static void isp1362_write_fifo(struct isp1362_hcd *isp1362_hcd, void *buf, u16 len)
+{
+	u8 *dp = buf;
+	u16 data;
+
+	if (!len)
+		return;
+
+	if ((unsigned)dp & 0x1) {
+		/* not aligned */
+		for (; len > 1; len -= 2) {
+			data = *dp++;
+			data |= *dp++ << 8;
+			isp1362_write_data16(isp1362_hcd, data);
+		}
+		if (len)
+			isp1362_write_data16(isp1362_hcd, *dp);
+		return;
+	}
+
+	_BUG_ON(!irqs_disabled());
+
+	RDBG("%s: Writing %d byte to fifo from memory @%p\n", __func__, len, buf);
+#if USE_32BIT
+	if (len >= 4) {
+		RDBG("%s: Using writesl for %d dwords\n", __func__, len >> 2);
+		writesl(isp1362_hcd->data_reg, dp, len >> 2);
+		dp += len & ~3;
+		len &= 3;
+	}
+#endif
+	if (len >= 2) {
+		RDBG("%s: Using writesw for %d words\n", __func__, len >> 1);
+		outsw((unsigned long)isp1362_hcd->data_reg, dp, len >> 1);
+		dp += len & ~1;
+		len &= 1;
+	}
+
+	BUG_ON(len & ~1);
+	if (len > 0) {
+		/* finally write any trailing byte; we don't need to care
+		 * about the high byte of the last word written
+		 */
+		data = (u16)*dp;
+		RDBG("%s: Sending trailing byte %02x from mem @ %08x\n", __func__,
+			data, (u32)dp);
+		isp1362_write_data16(isp1362_hcd, data);
+	}
+}
+
+#define isp1362_read_reg16(d, r)		({			\
+	u16 __v;							\
+	REG_WIDTH_TEST(ISP1362_REG_##r, REG_WIDTH_16);			\
+	isp1362_write_addr(d, ISP1362_REG_##r);				\
+	__v = isp1362_read_data16(d);					\
+	RDBG("%s: Read %04x from %s[%02x]\n", __func__, __v, #r,	\
+	     ISP1362_REG_NO(ISP1362_REG_##r));				\
+	__v;								\
+})
+
+#define isp1362_read_reg32(d, r)		({			\
+	u32 __v;							\
+	REG_WIDTH_TEST(ISP1362_REG_##r, REG_WIDTH_32);			\
+	isp1362_write_addr(d, ISP1362_REG_##r);				\
+	__v = isp1362_read_data32(d);					\
+	RDBG("%s: Read %08x from %s[%02x]\n", __func__, __v, #r,	\
+	     ISP1362_REG_NO(ISP1362_REG_##r));				\
+	__v;								\
+})
+
+#define isp1362_write_reg16(d, r, v)	{					\
+	REG_WIDTH_TEST(ISP1362_REG_##r, REG_WIDTH_16);				\
+	isp1362_write_addr(d, (ISP1362_REG_##r) | ISP1362_REG_WRITE_OFFSET);	\
+	isp1362_write_data16(d, (u16)(v));					\
+	RDBG("%s: Wrote %04x to %s[%02x]\n", __func__, (u16)(v), #r,	\
+	     ISP1362_REG_NO(ISP1362_REG_##r));					\
+}
+
+#define isp1362_write_reg32(d, r, v)	{					\
+	REG_WIDTH_TEST(ISP1362_REG_##r, REG_WIDTH_32);				\
+	isp1362_write_addr(d, (ISP1362_REG_##r) | ISP1362_REG_WRITE_OFFSET);	\
+	isp1362_write_data32(d, (u32)(v));					\
+	RDBG("%s: Wrote %08x to %s[%02x]\n", __func__, (u32)(v), #r,	\
+	     ISP1362_REG_NO(ISP1362_REG_##r));					\
+}
+
+#define isp1362_set_mask16(d, r, m) {			\
+	u16 __v;					\
+	__v = isp1362_read_reg16(d, r);			\
+	if ((__v | m) != __v)				\
+		isp1362_write_reg16(d, r, __v | m);	\
+}
+
+#define isp1362_clr_mask16(d, r, m) {			\
+	u16 __v;					\
+	__v = isp1362_read_reg16(d, r);			\
+	if ((__v & ~m) != __v)			\
+		isp1362_write_reg16(d, r, __v & ~m);	\
+}
+
+#define isp1362_set_mask32(d, r, m) {			\
+	u32 __v;					\
+	__v = isp1362_read_reg32(d, r);			\
+	if ((__v | m) != __v)				\
+		isp1362_write_reg32(d, r, __v | m);	\
+}
+
+#define isp1362_clr_mask32(d, r, m) {			\
+	u32 __v;					\
+	__v = isp1362_read_reg32(d, r);			\
+	if ((__v & ~m) != __v)			\
+		isp1362_write_reg32(d, r, __v & ~m);	\
+}
+
+#ifdef ISP1362_DEBUG
+#define isp1362_show_reg(d, r) {								\
+	if ((ISP1362_REG_##r & REG_WIDTH_MASK) == REG_WIDTH_32)			\
+		DBG(0, "%-12s[%02x]: %08x\n", #r,					\
+			ISP1362_REG_NO(ISP1362_REG_##r), isp1362_read_reg32(d, r));	\
+	else									\
+		DBG(0, "%-12s[%02x]:     %04x\n", #r,					\
+			ISP1362_REG_NO(ISP1362_REG_##r), isp1362_read_reg16(d, r));	\
+}
+#else
+#define isp1362_show_reg(d, r)	do {} while (0)
+#endif
+
+static void __attribute__((__unused__)) isp1362_show_regs(struct isp1362_hcd *isp1362_hcd)
+{
+	isp1362_show_reg(isp1362_hcd, HCREVISION);
+	isp1362_show_reg(isp1362_hcd, HCCONTROL);
+	isp1362_show_reg(isp1362_hcd, HCCMDSTAT);
+	isp1362_show_reg(isp1362_hcd, HCINTSTAT);
+	isp1362_show_reg(isp1362_hcd, HCINTENB);
+	isp1362_show_reg(isp1362_hcd, HCFMINTVL);
+	isp1362_show_reg(isp1362_hcd, HCFMREM);
+	isp1362_show_reg(isp1362_hcd, HCFMNUM);
+	isp1362_show_reg(isp1362_hcd, HCLSTHRESH);
+	isp1362_show_reg(isp1362_hcd, HCRHDESCA);
+	isp1362_show_reg(isp1362_hcd, HCRHDESCB);
+	isp1362_show_reg(isp1362_hcd, HCRHSTATUS);
+	isp1362_show_reg(isp1362_hcd, HCRHPORT1);
+	isp1362_show_reg(isp1362_hcd, HCRHPORT2);
+
+	isp1362_show_reg(isp1362_hcd, HCHWCFG);
+	isp1362_show_reg(isp1362_hcd, HCDMACFG);
+	isp1362_show_reg(isp1362_hcd, HCXFERCTR);
+	isp1362_show_reg(isp1362_hcd, HCuPINT);
+
+	if (in_interrupt())
+		DBG(0, "%-12s[%02x]:     %04x\n", "HCuPINTENB",
+			 ISP1362_REG_NO(ISP1362_REG_HCuPINTENB), isp1362_hcd->irqenb);
+	else
+		isp1362_show_reg(isp1362_hcd, HCuPINTENB);
+	isp1362_show_reg(isp1362_hcd, HCCHIPID);
+	isp1362_show_reg(isp1362_hcd, HCSCRATCH);
+	isp1362_show_reg(isp1362_hcd, HCBUFSTAT);
+	isp1362_show_reg(isp1362_hcd, HCDIRADDR);
+	/* Access would advance fifo
+	 * isp1362_show_reg(isp1362_hcd, HCDIRDATA);
+	 */
+	isp1362_show_reg(isp1362_hcd, HCISTLBUFSZ);
+	isp1362_show_reg(isp1362_hcd, HCISTLRATE);
+	isp1362_show_reg(isp1362_hcd, HCINTLBUFSZ);
+	isp1362_show_reg(isp1362_hcd, HCINTLBLKSZ);
+	isp1362_show_reg(isp1362_hcd, HCINTLDONE);
+	isp1362_show_reg(isp1362_hcd, HCINTLSKIP);
+	isp1362_show_reg(isp1362_hcd, HCINTLLAST);
+	isp1362_show_reg(isp1362_hcd, HCINTLCURR);
+	isp1362_show_reg(isp1362_hcd, HCATLBUFSZ);
+	isp1362_show_reg(isp1362_hcd, HCATLBLKSZ);
+	/* only valid after ATL_DONE interrupt
+	 * isp1362_show_reg(isp1362_hcd, HCATLDONE);
+	 */
+	isp1362_show_reg(isp1362_hcd, HCATLSKIP);
+	isp1362_show_reg(isp1362_hcd, HCATLLAST);
+	isp1362_show_reg(isp1362_hcd, HCATLCURR);
+	isp1362_show_reg(isp1362_hcd, HCATLDTC);
+	isp1362_show_reg(isp1362_hcd, HCATLDTCTO);
+}
+
+static void isp1362_write_diraddr(struct isp1362_hcd *isp1362_hcd, u16 offset, u16 len)
+{
+	_BUG_ON(offset & 1);
+	_BUG_ON(offset >= ISP1362_BUF_SIZE);
+	_BUG_ON(len > ISP1362_BUF_SIZE);
+	_BUG_ON(offset + len > ISP1362_BUF_SIZE);
+	len = (len + 1) & ~1;
+
+	isp1362_clr_mask16(isp1362_hcd, HCDMACFG, HCDMACFG_CTR_ENABLE);
+	isp1362_write_reg32(isp1362_hcd, HCDIRADDR,
+			    HCDIRADDR_ADDR(offset) | HCDIRADDR_COUNT(len));
+}
+
+static void isp1362_read_buffer(struct isp1362_hcd *isp1362_hcd, void *buf, u16 offset, int len)
+{
+	_BUG_ON(offset & 1);
+
+	isp1362_write_diraddr(isp1362_hcd, offset, len);
+
+	DBG(3, "%s: Reading %d byte from buffer @%04x to memory @ %08x\n", __func__,
+	    len, offset, (u32)buf);
+
+	isp1362_write_reg16(isp1362_hcd, HCuPINT, HCuPINT_EOT);
+	_WARN_ON((isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_EOT));
+
+	isp1362_write_addr(isp1362_hcd, ISP1362_REG_HCDIRDATA);
+
+	isp1362_read_fifo(isp1362_hcd, buf, len);
+	_WARN_ON(!(isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_EOT));
+	isp1362_write_reg16(isp1362_hcd, HCuPINT, HCuPINT_EOT);
+	_WARN_ON((isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_EOT));
+}
+
+static void isp1362_write_buffer(struct isp1362_hcd *isp1362_hcd, void *buf, u16 offset, int len)
+{
+	_BUG_ON(offset & 1);
+
+	isp1362_write_diraddr(isp1362_hcd, offset, len);
+
+	DBG(3, "%s: Writing %d byte to buffer @%04x from memory @ %08x\n", __func__,
+	    len, offset, (u32)buf);
+
+	isp1362_write_reg16(isp1362_hcd, HCuPINT, HCuPINT_EOT);
+	_WARN_ON((isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_EOT));
+
+	isp1362_write_addr(isp1362_hcd, ISP1362_REG_HCDIRDATA | ISP1362_REG_WRITE_OFFSET);
+	isp1362_write_fifo(isp1362_hcd, buf, len);
+
+	_WARN_ON(!(isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_EOT));
+	isp1362_write_reg16(isp1362_hcd, HCuPINT, HCuPINT_EOT);
+	_WARN_ON((isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_EOT));
+}
+
+static void __attribute__((unused)) dump_data(char *buf, int len)
+{
+	if (dbg_level > 0) {
+		int k;
+		int lf = 0;
+
+		for (k = 0; k < len; ++k) {
+			if (!lf)
+				DBG(0, "%04x:", k);
+			printk(" %02x", ((u8 *) buf)[k]);
+			lf = 1;
+			if (!k)
+				continue;
+			if (k % 16 == 15) {
+				printk("\n");
+				lf = 0;
+				continue;
+			}
+			if (k % 8 == 7)
+				printk(" ");
+			if (k % 4 == 3)
+				printk(" ");
+		}
+		if (lf)
+			printk("\n");
+	}
+}
+
+#if defined(ISP1362_DEBUG) && defined(PTD_TRACE)
+
+static void dump_ptd(struct ptd *ptd)
+{
+	DBG(0, "EP %p: CC=%x EP=%d DIR=%x CNT=%d LEN=%d MPS=%d TGL=%x ACT=%x FA=%d SPD=%x SF=%x PR=%x LST=%x\n",
+	    container_of(ptd, struct isp1362_ep, ptd),
+	    PTD_GET_CC(ptd), PTD_GET_EP(ptd), PTD_GET_DIR(ptd),
+	    PTD_GET_COUNT(ptd), PTD_GET_LEN(ptd), PTD_GET_MPS(ptd),
+	    PTD_GET_TOGGLE(ptd), PTD_GET_ACTIVE(ptd), PTD_GET_FA(ptd),
+	    PTD_GET_SPD(ptd), PTD_GET_SF_INT(ptd), PTD_GET_PR(ptd), PTD_GET_LAST(ptd));
+	DBG(0, "  %04x %04x %04x %04x\n", ptd->count, ptd->mps, ptd->len, ptd->faddr);
+}
+
+static void dump_ptd_out_data(struct ptd *ptd, u8 *buf)
+{
+	if (dbg_level > 0) {
+		if (PTD_GET_DIR(ptd) != PTD_DIR_IN && PTD_GET_LEN(ptd)) {
+			DBG(0, "--out->\n");
+			dump_data(buf, PTD_GET_LEN(ptd));
+		}
+	}
+}
+
+static void dump_ptd_in_data(struct ptd *ptd, u8 *buf)
+{
+	if (dbg_level > 0) {
+		if (PTD_GET_DIR(ptd) == PTD_DIR_IN && PTD_GET_COUNT(ptd)) {
+			DBG(0, "<--in--\n");
+			dump_data(buf, PTD_GET_COUNT(ptd));
+		}
+		DBG(0, "-----\n");
+	}
+}
+
+static void dump_ptd_queue(struct isp1362_ep_queue *epq)
+{
+	struct isp1362_ep *ep;
+	int dbg = dbg_level;
+
+	dbg_level = 1;
+	list_for_each_entry(ep, &epq->active, active) {
+		dump_ptd(&ep->ptd);
+		dump_data(ep->data, ep->length);
+	}
+	dbg_level = dbg;
+}
+#else
+#define dump_ptd(ptd)			do {} while (0)
+#define dump_ptd_in_data(ptd, buf)	do {} while (0)
+#define dump_ptd_out_data(ptd, buf)	do {} while (0)
+#define dump_ptd_data(ptd, buf)		do {} while (0)
+#define dump_ptd_queue(epq)		do {} while (0)
+#endif
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index 15438469f21a..9600a58299db 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -386,6 +386,10 @@ static int isp1760_hc_setup(struct usb_hcd *hcd)
 		hwmode |= HW_DACK_POL_HIGH;
 	if (priv->devflags & ISP1760_FLAG_DREQ_POL_HIGH)
 		hwmode |= HW_DREQ_POL_HIGH;
+	if (priv->devflags & ISP1760_FLAG_INTR_POL_HIGH)
+		hwmode |= HW_INTR_HIGH_ACT;
+	if (priv->devflags & ISP1760_FLAG_INTR_EDGE_TRIG)
+		hwmode |= HW_INTR_EDGE_TRIG;
 
 	/*
 	 * We have to set this first in case we're in 16-bit mode.
diff --git a/drivers/usb/host/isp1760-hcd.h b/drivers/usb/host/isp1760-hcd.h
index 462f4943cb1b..6931ef5c9650 100644
--- a/drivers/usb/host/isp1760-hcd.h
+++ b/drivers/usb/host/isp1760-hcd.h
@@ -142,6 +142,8 @@ typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh,
 #define ISP1760_FLAG_DACK_POL_HIGH	0x00000010 /* DACK active high */
 #define ISP1760_FLAG_DREQ_POL_HIGH	0x00000020 /* DREQ active high */
 #define ISP1760_FLAG_ISP1761		0x00000040 /* Chip is ISP1761 */
+#define ISP1760_FLAG_INTR_POL_HIGH	0x00000080 /* Interrupt polarity active high */
+#define ISP1760_FLAG_INTR_EDGE_TRIG	0x00000100 /* Interrupt edge triggered */
 
 /* chip memory management */
 struct memory_chunk {
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index d4feebfc63bd..1c9f977a5c9c 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -3,6 +3,7 @@
  * Currently there is support for
  * - OpenFirmware
  * - PCI
+ * - PDEV (generic platform device centralized driver model)
  *
  * (c) 2007 Sebastian Siewior <bigeasy@linutronix.de>
  *
@@ -11,6 +12,7 @@
 #include <linux/usb.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
+#include <linux/usb/isp1760.h>
 
 #include "../core/hcd.h"
 #include "isp1760-hcd.h"
@@ -308,6 +310,8 @@ static int __devinit isp1760_plat_probe(struct platform_device *pdev)
 	struct resource *mem_res;
 	struct resource *irq_res;
 	resource_size_t mem_size;
+	struct isp1760_platform_data *priv = pdev->dev.platform_data;
+	unsigned int devflags = 0;
 	unsigned long irqflags = IRQF_SHARED | IRQF_DISABLED;
 
 	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -330,8 +334,23 @@ static int __devinit isp1760_plat_probe(struct platform_device *pdev)
 	}
 	irqflags |= irq_res->flags & IRQF_TRIGGER_MASK;
 
+	if (priv) {
+		if (priv->is_isp1761)
+			devflags |= ISP1760_FLAG_ISP1761;
+		if (priv->bus_width_16)
+			devflags |= ISP1760_FLAG_BUS_WIDTH_16;
+		if (priv->port1_otg)
+			devflags |= ISP1760_FLAG_OTG_EN;
+		if (priv->analog_oc)
+			devflags |= ISP1760_FLAG_ANALOG_OC;
+		if (priv->dack_polarity_high)
+			devflags |= ISP1760_FLAG_DACK_POL_HIGH;
+		if (priv->dreq_polarity_high)
+			devflags |= ISP1760_FLAG_DREQ_POL_HIGH;
+	}
+
 	hcd = isp1760_register(mem_res->start, mem_size, irq_res->start,
-			       irqflags, &pdev->dev, dev_name(&pdev->dev), 0);
+			       irqflags, &pdev->dev, dev_name(&pdev->dev), devflags);
 	if (IS_ERR(hcd)) {
 		pr_warning("isp1760: Failed to register the HCD device\n");
 		ret = -ENODEV;
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index bb5e6f671578..7ccffcbe7b6f 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -148,7 +148,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
 	at91_start_hc(pdev);
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
-	retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED);
+	retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_SHARED);
 	if (retval == 0)
 		return retval;
 
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 2ac4e022a13f..e4380082ebb1 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -248,10 +248,9 @@ static int ohci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM
-static int ohci_hcd_au1xxx_drv_suspend(struct platform_device *pdev,
-					pm_message_t message)
+static int ohci_hcd_au1xxx_drv_suspend(struct device *dev)
 {
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
 	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
 	unsigned long flags;
 	int rc;
@@ -274,10 +273,6 @@ static int ohci_hcd_au1xxx_drv_suspend(struct platform_device *pdev,
 	ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
 	(void)ohci_readl(ohci, &ohci->regs->intrdisable);
 
-	/* make sure snapshot being resumed re-enumerates everything */
-	if (message.event == PM_EVENT_PRETHAW)
-		ohci_usb_reset(ohci);
-
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 
 	au1xxx_stop_ohc();
@@ -287,9 +282,9 @@ bail:
 	return rc;
 }
 
-static int ohci_hcd_au1xxx_drv_resume(struct platform_device *pdev)
+static int ohci_hcd_au1xxx_drv_resume(struct device *dev)
 {
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
 
 	au1xxx_start_ohc();
 
@@ -298,20 +293,26 @@ static int ohci_hcd_au1xxx_drv_resume(struct platform_device *pdev)
 
 	return 0;
 }
+
+static struct dev_pm_ops au1xxx_ohci_pmops = {
+	.suspend	= ohci_hcd_au1xxx_drv_suspend,
+	.resume		= ohci_hcd_au1xxx_drv_resume,
+};
+
+#define AU1XXX_OHCI_PMOPS &au1xxx_ohci_pmops
+
 #else
-#define ohci_hcd_au1xxx_drv_suspend NULL
-#define ohci_hcd_au1xxx_drv_resume NULL
+#define AU1XXX_OHCI_PMOPS NULL
 #endif
 
 static struct platform_driver ohci_hcd_au1xxx_driver = {
 	.probe		= ohci_hcd_au1xxx_drv_probe,
 	.remove		= ohci_hcd_au1xxx_drv_remove,
 	.shutdown	= usb_hcd_platform_shutdown,
-	.suspend	= ohci_hcd_au1xxx_drv_suspend,
-	.resume		= ohci_hcd_au1xxx_drv_resume,
 	.driver		= {
 		.name	= "au1xxx-ohci",
 		.owner	= THIS_MODULE,
+		.pm	= AU1XXX_OHCI_PMOPS,
 	},
 };
 
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index b0dbf4157d29..4e681613e7ae 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -188,7 +188,6 @@ static int ohci_hcd_ep93xx_drv_resume(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
 	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-	int status;
 
 	if (time_before(jiffies, ohci->next_statechange))
 		msleep(5);
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 58151687d351..78bb7710f36d 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -34,7 +34,6 @@
 #include <linux/usb/otg.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmapool.h>
-#include <linux/reboot.h>
 #include <linux/workqueue.h>
 #include <linux/debugfs.h>
 
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index bbc0c3b720b2..f1c06202fdf2 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -177,9 +177,13 @@ static inline void pxa27x_setup_hc(struct pxa27x_ohci *ohci,
 
 	if (inf->flags & NO_OC_PROTECTION)
 		uhcrhda |= UHCRHDA_NOCP;
+	else
+		uhcrhda &= ~UHCRHDA_NOCP;
 
 	if (inf->flags & OC_MODE_PERPORT)
 		uhcrhda |= UHCRHDA_OCPM;
+	else
+		uhcrhda &= ~UHCRHDA_OCPM;
 
 	if (inf->power_on_delay) {
 		uhcrhda &= ~UHCRHDA_POTPGT(0xff);
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index c2d80f80448b..16fecb8ecc39 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -418,7 +418,7 @@ static struct ed *ed_get (
 		is_out = !(ep->desc.bEndpointAddress & USB_DIR_IN);
 
 		/* FIXME usbcore changes dev->devnum before SET_ADDRESS
-		 * suceeds ... otherwise we wouldn't need "pipe".
+		 * succeeds ... otherwise we wouldn't need "pipe".
 		 */
 		info = usb_pipedevice (pipe);
 		ed->type = usb_pipetype(pipe);
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 5ac489ee3dab..50f57f468836 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -33,7 +33,6 @@
 #include <linux/timer.h>
 #include <linux/list.h>
 #include <linux/interrupt.h>
-#include <linux/reboot.h>
 #include <linux/usb.h>
 #include <linux/moduleparam.h>
 #include <linux/dma-mapping.h>
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 83b5f9cea85a..23cf3bde4762 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -475,4 +475,4 @@ static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
 	else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI)
 		quirk_usb_handoff_xhci(pdev);
 }
-DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index e18f74946e68..749b53742828 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -91,43 +91,43 @@ static int r8a66597_clock_enable(struct r8a66597 *r8a66597)
 	u16 tmp;
 	int i = 0;
 
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
-#if defined(CONFIG_HAVE_CLK)
-	clk_enable(r8a66597->clk);
+	if (r8a66597->pdata->on_chip) {
+#ifdef CONFIG_HAVE_CLK
+		clk_enable(r8a66597->clk);
 #endif
-	do {
-		r8a66597_write(r8a66597, SCKE, SYSCFG0);
-		tmp = r8a66597_read(r8a66597, SYSCFG0);
-		if (i++ > 1000) {
-			printk(KERN_ERR "r8a66597: register access fail.\n");
-			return -ENXIO;
-		}
-	} while ((tmp & SCKE) != SCKE);
-	r8a66597_write(r8a66597, 0x04, 0x02);
-#else
-	do {
-		r8a66597_write(r8a66597, USBE, SYSCFG0);
-		tmp = r8a66597_read(r8a66597, SYSCFG0);
-		if (i++ > 1000) {
-			printk(KERN_ERR "r8a66597: register access fail.\n");
-			return -ENXIO;
-		}
-	} while ((tmp & USBE) != USBE);
-	r8a66597_bclr(r8a66597, USBE, SYSCFG0);
-	r8a66597_mdfy(r8a66597, get_xtal_from_pdata(r8a66597->pdata), XTAL,
-			SYSCFG0);
+		do {
+			r8a66597_write(r8a66597, SCKE, SYSCFG0);
+			tmp = r8a66597_read(r8a66597, SYSCFG0);
+			if (i++ > 1000) {
+				printk(KERN_ERR "r8a66597: reg access fail.\n");
+				return -ENXIO;
+			}
+		} while ((tmp & SCKE) != SCKE);
+		r8a66597_write(r8a66597, 0x04, 0x02);
+	} else {
+		do {
+			r8a66597_write(r8a66597, USBE, SYSCFG0);
+			tmp = r8a66597_read(r8a66597, SYSCFG0);
+			if (i++ > 1000) {
+				printk(KERN_ERR "r8a66597: reg access fail.\n");
+				return -ENXIO;
+			}
+		} while ((tmp & USBE) != USBE);
+		r8a66597_bclr(r8a66597, USBE, SYSCFG0);
+		r8a66597_mdfy(r8a66597, get_xtal_from_pdata(r8a66597->pdata),
+			      XTAL, SYSCFG0);
 
-	i = 0;
-	r8a66597_bset(r8a66597, XCKE, SYSCFG0);
-	do {
-		msleep(1);
-		tmp = r8a66597_read(r8a66597, SYSCFG0);
-		if (i++ > 500) {
-			printk(KERN_ERR "r8a66597: register access fail.\n");
-			return -ENXIO;
-		}
-	} while ((tmp & SCKE) != SCKE);
-#endif	/* #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) */
+		i = 0;
+		r8a66597_bset(r8a66597, XCKE, SYSCFG0);
+		do {
+			msleep(1);
+			tmp = r8a66597_read(r8a66597, SYSCFG0);
+			if (i++ > 500) {
+				printk(KERN_ERR "r8a66597: reg access fail.\n");
+				return -ENXIO;
+			}
+		} while ((tmp & SCKE) != SCKE);
+	}
 
 	return 0;
 }
@@ -136,15 +136,16 @@ static void r8a66597_clock_disable(struct r8a66597 *r8a66597)
 {
 	r8a66597_bclr(r8a66597, SCKE, SYSCFG0);
 	udelay(1);
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
-#if defined(CONFIG_HAVE_CLK)
-	clk_disable(r8a66597->clk);
-#endif
-#else
-	r8a66597_bclr(r8a66597, PLLC, SYSCFG0);
-	r8a66597_bclr(r8a66597, XCKE, SYSCFG0);
-	r8a66597_bclr(r8a66597, USBE, SYSCFG0);
+
+	if (r8a66597->pdata->on_chip) {
+#ifdef CONFIG_HAVE_CLK
+		clk_disable(r8a66597->clk);
 #endif
+	} else {
+		r8a66597_bclr(r8a66597, PLLC, SYSCFG0);
+		r8a66597_bclr(r8a66597, XCKE, SYSCFG0);
+		r8a66597_bclr(r8a66597, USBE, SYSCFG0);
+	}
 }
 
 static void r8a66597_enable_port(struct r8a66597 *r8a66597, int port)
@@ -205,7 +206,7 @@ static int enable_controller(struct r8a66597 *r8a66597)
 
 	r8a66597_bset(r8a66597, SIGNE | SACKE, INTENB1);
 
-	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++)
+	for (port = 0; port < r8a66597->max_root_hub; port++)
 		r8a66597_enable_port(r8a66597, port);
 
 	return 0;
@@ -218,7 +219,7 @@ static void disable_controller(struct r8a66597 *r8a66597)
 	r8a66597_write(r8a66597, 0, INTENB0);
 	r8a66597_write(r8a66597, 0, INTSTS0);
 
-	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++)
+	for (port = 0; port < r8a66597->max_root_hub; port++)
 		r8a66597_disable_port(r8a66597, port);
 
 	r8a66597_clock_disable(r8a66597);
@@ -249,11 +250,12 @@ static int is_hub_limit(char *devpath)
 	return ((strlen(devpath) >= 4) ? 1 : 0);
 }
 
-static void get_port_number(char *devpath, u16 *root_port, u16 *hub_port)
+static void get_port_number(struct r8a66597 *r8a66597,
+			    char *devpath, u16 *root_port, u16 *hub_port)
 {
 	if (root_port) {
 		*root_port = (devpath[0] & 0x0F) - 1;
-		if (*root_port >= R8A66597_MAX_ROOT_HUB)
+		if (*root_port >= r8a66597->max_root_hub)
 			printk(KERN_ERR "r8a66597: Illegal root port number.\n");
 	}
 	if (hub_port)
@@ -355,7 +357,8 @@ static int make_r8a66597_device(struct r8a66597 *r8a66597,
 	INIT_LIST_HEAD(&dev->device_list);
 	list_add_tail(&dev->device_list, &r8a66597->child_device);
 
-	get_port_number(urb->dev->devpath, &dev->root_port, &dev->hub_port);
+	get_port_number(r8a66597, urb->dev->devpath,
+			&dev->root_port, &dev->hub_port);
 	if (!is_child_device(urb->dev->devpath))
 		r8a66597->root_hub[dev->root_port].dev = dev;
 
@@ -420,7 +423,7 @@ static void free_usb_address(struct r8a66597 *r8a66597,
 	list_del(&dev->device_list);
 	kfree(dev);
 
-	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) {
+	for (port = 0; port < r8a66597->max_root_hub; port++) {
 		if (r8a66597->root_hub[port].dev == dev) {
 			r8a66597->root_hub[port].dev = NULL;
 			break;
@@ -495,10 +498,20 @@ static void r8a66597_pipe_toggle(struct r8a66597 *r8a66597,
 		r8a66597_bset(r8a66597, SQCLR, pipe->pipectr);
 }
 
+static inline unsigned short mbw_value(struct r8a66597 *r8a66597)
+{
+	if (r8a66597->pdata->on_chip)
+		return MBW_32;
+	else
+		return MBW_16;
+}
+
 /* this function must be called with interrupt disabled */
 static inline void cfifo_change(struct r8a66597 *r8a66597, u16 pipenum)
 {
-	r8a66597_mdfy(r8a66597, MBW | pipenum, MBW | CURPIPE, CFIFOSEL);
+	unsigned short mbw = mbw_value(r8a66597);
+
+	r8a66597_mdfy(r8a66597, mbw | pipenum, mbw | CURPIPE, CFIFOSEL);
 	r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, pipenum);
 }
 
@@ -506,11 +519,13 @@ static inline void cfifo_change(struct r8a66597 *r8a66597, u16 pipenum)
 static inline void fifo_change_from_pipe(struct r8a66597 *r8a66597,
 					 struct r8a66597_pipe *pipe)
 {
+	unsigned short mbw = mbw_value(r8a66597);
+
 	cfifo_change(r8a66597, 0);
-	r8a66597_mdfy(r8a66597, MBW | 0, MBW | CURPIPE, D0FIFOSEL);
-	r8a66597_mdfy(r8a66597, MBW | 0, MBW | CURPIPE, D1FIFOSEL);
+	r8a66597_mdfy(r8a66597, mbw | 0, mbw | CURPIPE, D0FIFOSEL);
+	r8a66597_mdfy(r8a66597, mbw | 0, mbw | CURPIPE, D1FIFOSEL);
 
-	r8a66597_mdfy(r8a66597, MBW | pipe->info.pipenum, MBW | CURPIPE,
+	r8a66597_mdfy(r8a66597, mbw | pipe->info.pipenum, mbw | CURPIPE,
 		      pipe->fifosel);
 	r8a66597_reg_wait(r8a66597, pipe->fifosel, CURPIPE, pipe->info.pipenum);
 }
@@ -742,9 +757,13 @@ static void enable_r8a66597_pipe_dma(struct r8a66597 *r8a66597,
 				     struct r8a66597_pipe *pipe,
 				     struct urb *urb)
 {
-#if !defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
 	int i;
 	struct r8a66597_pipe_info *info = &pipe->info;
+	unsigned short mbw = mbw_value(r8a66597);
+
+	/* pipe dma is only for external controlles */
+	if (r8a66597->pdata->on_chip)
+		return;
 
 	if ((pipe->info.pipenum != 0) && (info->type != R8A66597_INT)) {
 		for (i = 0; i < R8A66597_MAX_DMA_CHANNEL; i++) {
@@ -763,8 +782,8 @@ static void enable_r8a66597_pipe_dma(struct r8a66597 *r8a66597,
 			set_pipe_reg_addr(pipe, i);
 
 			cfifo_change(r8a66597, 0);
-			r8a66597_mdfy(r8a66597, MBW | pipe->info.pipenum,
-				      MBW | CURPIPE, pipe->fifosel);
+			r8a66597_mdfy(r8a66597, mbw | pipe->info.pipenum,
+				      mbw | CURPIPE, pipe->fifosel);
 
 			r8a66597_reg_wait(r8a66597, pipe->fifosel, CURPIPE,
 					  pipe->info.pipenum);
@@ -772,7 +791,6 @@ static void enable_r8a66597_pipe_dma(struct r8a66597 *r8a66597,
 			break;
 		}
 	}
-#endif	/* #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) */
 }
 
 /* this function must be called with interrupt disabled */
@@ -1769,7 +1787,7 @@ static void r8a66597_timer(unsigned long _r8a66597)
 
 	spin_lock_irqsave(&r8a66597->lock, flags);
 
-	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++)
+	for (port = 0; port < r8a66597->max_root_hub; port++)
 		r8a66597_root_hub_control(r8a66597, port);
 
 	spin_unlock_irqrestore(&r8a66597->lock, flags);
@@ -1807,7 +1825,7 @@ static void set_address_zero(struct r8a66597 *r8a66597, struct urb *urb)
 	u16 root_port, hub_port;
 
 	if (usb_address == 0) {
-		get_port_number(urb->dev->devpath,
+		get_port_number(r8a66597, urb->dev->devpath,
 				&root_port, &hub_port);
 		set_devadd_reg(r8a66597, 0,
 			       get_r8a66597_usb_speed(urb->dev->speed),
@@ -2082,7 +2100,7 @@ static int r8a66597_hub_status_data(struct usb_hcd *hcd, char *buf)
 
 	*buf = 0;	/* initialize (no change) */
 
-	for (i = 0; i < R8A66597_MAX_ROOT_HUB; i++) {
+	for (i = 0; i < r8a66597->max_root_hub; i++) {
 		if (r8a66597->root_hub[i].port & 0xffff0000)
 			*buf |= 1 << (i + 1);
 	}
@@ -2097,11 +2115,11 @@ static void r8a66597_hub_descriptor(struct r8a66597 *r8a66597,
 {
 	desc->bDescriptorType = 0x29;
 	desc->bHubContrCurrent = 0;
-	desc->bNbrPorts = R8A66597_MAX_ROOT_HUB;
+	desc->bNbrPorts = r8a66597->max_root_hub;
 	desc->bDescLength = 9;
 	desc->bPwrOn2PwrGood = 0;
 	desc->wHubCharacteristics = cpu_to_le16(0x0011);
-	desc->bitmap[0] = ((1 << R8A66597_MAX_ROOT_HUB) - 1) << 1;
+	desc->bitmap[0] = ((1 << r8a66597->max_root_hub) - 1) << 1;
 	desc->bitmap[1] = ~0;
 }
 
@@ -2129,7 +2147,7 @@ static int r8a66597_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		}
 		break;
 	case ClearPortFeature:
-		if (wIndex > R8A66597_MAX_ROOT_HUB)
+		if (wIndex > r8a66597->max_root_hub)
 			goto error;
 		if (wLength != 0)
 			goto error;
@@ -2162,12 +2180,12 @@ static int r8a66597_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		*buf = 0x00;
 		break;
 	case GetPortStatus:
-		if (wIndex > R8A66597_MAX_ROOT_HUB)
+		if (wIndex > r8a66597->max_root_hub)
 			goto error;
 		*(__le32 *)buf = cpu_to_le32(rh->port);
 		break;
 	case SetPortFeature:
-		if (wIndex > R8A66597_MAX_ROOT_HUB)
+		if (wIndex > r8a66597->max_root_hub)
 			goto error;
 		if (wLength != 0)
 			goto error;
@@ -2216,7 +2234,7 @@ static int r8a66597_bus_suspend(struct usb_hcd *hcd)
 
 	dbg("%s", __func__);
 
-	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) {
+	for (port = 0; port < r8a66597->max_root_hub; port++) {
 		struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
 		unsigned long dvstctr_reg = get_dvstctr_reg(port);
 
@@ -2247,7 +2265,7 @@ static int r8a66597_bus_resume(struct usb_hcd *hcd)
 
 	dbg("%s", __func__);
 
-	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) {
+	for (port = 0; port < r8a66597->max_root_hub; port++) {
 		struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
 		unsigned long dvstctr_reg = get_dvstctr_reg(port);
 
@@ -2305,16 +2323,16 @@ static struct hc_driver r8a66597_hc_driver = {
 };
 
 #if defined(CONFIG_PM)
-static int r8a66597_suspend(struct platform_device *pdev, pm_message_t state)
+static int r8a66597_suspend(struct device *dev)
 {
-	struct r8a66597		*r8a66597 = dev_get_drvdata(&pdev->dev);
+	struct r8a66597		*r8a66597 = dev_get_drvdata(dev);
 	int port;
 
 	dbg("%s", __func__);
 
 	disable_controller(r8a66597);
 
-	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) {
+	for (port = 0; port < r8a66597->max_root_hub; port++) {
 		struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
 
 		rh->port = 0x00000000;
@@ -2323,9 +2341,9 @@ static int r8a66597_suspend(struct platform_device *pdev, pm_message_t state)
 	return 0;
 }
 
-static int r8a66597_resume(struct platform_device *pdev)
+static int r8a66597_resume(struct device *dev)
 {
-	struct r8a66597		*r8a66597 = dev_get_drvdata(&pdev->dev);
+	struct r8a66597		*r8a66597 = dev_get_drvdata(dev);
 	struct usb_hcd		*hcd = r8a66597_to_hcd(r8a66597);
 
 	dbg("%s", __func__);
@@ -2335,9 +2353,17 @@ static int r8a66597_resume(struct platform_device *pdev)
 
 	return 0;
 }
+
+static struct dev_pm_ops r8a66597_dev_pm_ops = {
+	.suspend = r8a66597_suspend,
+	.resume = r8a66597_resume,
+	.poweroff = r8a66597_suspend,
+	.restore = r8a66597_resume,
+};
+
+#define R8A66597_DEV_PM_OPS	(&r8a66597_dev_pm_ops)
 #else	/* if defined(CONFIG_PM) */
-#define r8a66597_suspend	NULL
-#define r8a66597_resume		NULL
+#define R8A66597_DEV_PM_OPS	NULL
 #endif
 
 static int __init_or_module r8a66597_remove(struct platform_device *pdev)
@@ -2348,8 +2374,9 @@ static int __init_or_module r8a66597_remove(struct platform_device *pdev)
 	del_timer_sync(&r8a66597->rh_timer);
 	usb_remove_hcd(hcd);
 	iounmap((void *)r8a66597->reg);
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
-	clk_put(r8a66597->clk);
+#ifdef CONFIG_HAVE_CLK
+	if (r8a66597->pdata->on_chip)
+		clk_put(r8a66597->clk);
 #endif
 	usb_put_hcd(hcd);
 	return 0;
@@ -2357,7 +2384,7 @@ static int __init_or_module r8a66597_remove(struct platform_device *pdev)
 
 static int __devinit r8a66597_probe(struct platform_device *pdev)
 {
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
 	char clk_name[8];
 #endif
 	struct resource *res = NULL, *ires;
@@ -2419,15 +2446,20 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
 	r8a66597->pdata = pdev->dev.platform_data;
 	r8a66597->irq_sense_low = irq_trigger == IRQF_TRIGGER_LOW;
 
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
-	snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id);
-	r8a66597->clk = clk_get(&pdev->dev, clk_name);
-	if (IS_ERR(r8a66597->clk)) {
-		dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name);
-		ret = PTR_ERR(r8a66597->clk);
-		goto clean_up2;
-	}
+	if (r8a66597->pdata->on_chip) {
+#ifdef CONFIG_HAVE_CLK
+		snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id);
+		r8a66597->clk = clk_get(&pdev->dev, clk_name);
+		if (IS_ERR(r8a66597->clk)) {
+			dev_err(&pdev->dev, "cannot get clock \"%s\"\n",
+				clk_name);
+			ret = PTR_ERR(r8a66597->clk);
+			goto clean_up2;
+		}
 #endif
+		r8a66597->max_root_hub = 1;
+	} else
+		r8a66597->max_root_hub = 2;
 
 	spin_lock_init(&r8a66597->lock);
 	init_timer(&r8a66597->rh_timer);
@@ -2457,8 +2489,9 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
 	return 0;
 
 clean_up3:
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
-	clk_put(r8a66597->clk);
+#ifdef CONFIG_HAVE_CLK
+	if (r8a66597->pdata->on_chip)
+		clk_put(r8a66597->clk);
 clean_up2:
 #endif
 	usb_put_hcd(hcd);
@@ -2473,11 +2506,10 @@ clean_up:
 static struct platform_driver r8a66597_driver = {
 	.probe =	r8a66597_probe,
 	.remove =	r8a66597_remove,
-	.suspend =	r8a66597_suspend,
-	.resume =	r8a66597_resume,
 	.driver		= {
 		.name = (char *) hcd_name,
 		.owner	= THIS_MODULE,
+		.pm	= R8A66597_DEV_PM_OPS,
 	},
 };
 
diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
index d72680b433f9..228e3fb23854 100644
--- a/drivers/usb/host/r8a66597.h
+++ b/drivers/usb/host/r8a66597.h
@@ -26,390 +26,16 @@
 #ifndef __R8A66597_H__
 #define __R8A66597_H__
 
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
 #include <linux/clk.h>
 #endif
 
 #include <linux/usb/r8a66597.h>
 
-#define SYSCFG0		0x00
-#define SYSCFG1		0x02
-#define SYSSTS0		0x04
-#define SYSSTS1		0x06
-#define DVSTCTR0	0x08
-#define DVSTCTR1	0x0A
-#define TESTMODE	0x0C
-#define PINCFG		0x0E
-#define DMA0CFG		0x10
-#define DMA1CFG		0x12
-#define CFIFO		0x14
-#define D0FIFO		0x18
-#define D1FIFO		0x1C
-#define CFIFOSEL	0x20
-#define CFIFOCTR	0x22
-#define CFIFOSIE	0x24
-#define D0FIFOSEL	0x28
-#define D0FIFOCTR	0x2A
-#define D1FIFOSEL	0x2C
-#define D1FIFOCTR	0x2E
-#define INTENB0		0x30
-#define INTENB1		0x32
-#define INTENB2		0x34
-#define BRDYENB		0x36
-#define NRDYENB		0x38
-#define BEMPENB		0x3A
-#define SOFCFG		0x3C
-#define INTSTS0		0x40
-#define INTSTS1		0x42
-#define INTSTS2		0x44
-#define BRDYSTS		0x46
-#define NRDYSTS		0x48
-#define BEMPSTS		0x4A
-#define FRMNUM		0x4C
-#define UFRMNUM		0x4E
-#define USBADDR		0x50
-#define USBREQ		0x54
-#define USBVAL		0x56
-#define USBINDX		0x58
-#define USBLENG		0x5A
-#define DCPCFG		0x5C
-#define DCPMAXP		0x5E
-#define DCPCTR		0x60
-#define PIPESEL		0x64
-#define PIPECFG		0x68
-#define PIPEBUF		0x6A
-#define PIPEMAXP	0x6C
-#define PIPEPERI	0x6E
-#define PIPE1CTR	0x70
-#define PIPE2CTR	0x72
-#define PIPE3CTR	0x74
-#define PIPE4CTR	0x76
-#define PIPE5CTR	0x78
-#define PIPE6CTR	0x7A
-#define PIPE7CTR	0x7C
-#define PIPE8CTR	0x7E
-#define PIPE9CTR	0x80
-#define PIPE1TRE	0x90
-#define PIPE1TRN	0x92
-#define PIPE2TRE	0x94
-#define PIPE2TRN	0x96
-#define PIPE3TRE	0x98
-#define PIPE3TRN	0x9A
-#define PIPE4TRE	0x9C
-#define	PIPE4TRN	0x9E
-#define	PIPE5TRE	0xA0
-#define	PIPE5TRN	0xA2
-#define DEVADD0		0xD0
-#define DEVADD1		0xD2
-#define DEVADD2		0xD4
-#define DEVADD3		0xD6
-#define DEVADD4		0xD8
-#define DEVADD5		0xDA
-#define DEVADD6		0xDC
-#define DEVADD7		0xDE
-#define DEVADD8		0xE0
-#define DEVADD9		0xE2
-#define DEVADDA		0xE4
-
-/* System Configuration Control Register */
-#define	XTAL		0xC000	/* b15-14: Crystal selection */
-#define	  XTAL48	 0x8000	  /* 48MHz */
-#define	  XTAL24	 0x4000	  /* 24MHz */
-#define	  XTAL12	 0x0000	  /* 12MHz */
-#define	XCKE		0x2000	/* b13: External clock enable */
-#define	PLLC		0x0800	/* b11: PLL control */
-#define	SCKE		0x0400	/* b10: USB clock enable */
-#define	PCSDIS		0x0200	/* b9: not CS wakeup */
-#define	LPSME		0x0100	/* b8: Low power sleep mode */
-#define	HSE		0x0080	/* b7: Hi-speed enable */
-#define	DCFM		0x0040	/* b6: Controller function select  */
-#define	DRPD		0x0020	/* b5: D+/- pull down control */
-#define	DPRPU		0x0010	/* b4: D+ pull up control */
-#define	USBE		0x0001	/* b0: USB module operation enable */
-
-/* System Configuration Status Register */
-#define	OVCBIT		0x8000	/* b15-14: Over-current bit */
-#define	OVCMON		0xC000	/* b15-14: Over-current monitor */
-#define	SOFEA		0x0020	/* b5: SOF monitor */
-#define	IDMON		0x0004	/* b3: ID-pin monitor */
-#define	LNST		0x0003	/* b1-0: D+, D- line status */
-#define	  SE1		 0x0003	  /* SE1 */
-#define	  FS_KSTS	 0x0002	  /* Full-Speed K State */
-#define	  FS_JSTS	 0x0001	  /* Full-Speed J State */
-#define	  LS_JSTS	 0x0002	  /* Low-Speed J State */
-#define	  LS_KSTS	 0x0001	  /* Low-Speed K State */
-#define	  SE0		 0x0000	  /* SE0 */
-
-/* Device State Control Register */
-#define	EXTLP0		0x0400	/* b10: External port */
-#define	VBOUT		0x0200	/* b9: VBUS output */
-#define	WKUP		0x0100	/* b8: Remote wakeup */
-#define	RWUPE		0x0080	/* b7: Remote wakeup sense */
-#define	USBRST		0x0040	/* b6: USB reset enable */
-#define	RESUME		0x0020	/* b5: Resume enable */
-#define	UACT		0x0010	/* b4: USB bus enable */
-#define	RHST		0x0007	/* b1-0: Reset handshake status */
-#define	  HSPROC	 0x0004	  /* HS handshake is processing */
-#define	  HSMODE	 0x0003	  /* Hi-Speed mode */
-#define	  FSMODE	 0x0002	  /* Full-Speed mode */
-#define	  LSMODE	 0x0001	  /* Low-Speed mode */
-#define	  UNDECID	 0x0000	  /* Undecided */
-
-/* Test Mode Register */
-#define	UTST			0x000F	/* b3-0: Test select */
-#define	  H_TST_PACKET		 0x000C	  /* HOST TEST Packet */
-#define	  H_TST_SE0_NAK		 0x000B	  /* HOST TEST SE0 NAK */
-#define	  H_TST_K		 0x000A	  /* HOST TEST K */
-#define	  H_TST_J		 0x0009	  /* HOST TEST J */
-#define	  H_TST_NORMAL		 0x0000	  /* HOST Normal Mode */
-#define	  P_TST_PACKET		 0x0004	  /* PERI TEST Packet */
-#define	  P_TST_SE0_NAK		 0x0003	  /* PERI TEST SE0 NAK */
-#define	  P_TST_K		 0x0002	  /* PERI TEST K */
-#define	  P_TST_J		 0x0001	  /* PERI TEST J */
-#define	  P_TST_NORMAL		 0x0000	  /* PERI Normal Mode */
-
-/* Data Pin Configuration Register */
-#define	LDRV			0x8000	/* b15: Drive Current Adjust */
-#define	  VIF1			  0x0000		/* VIF = 1.8V */
-#define	  VIF3			  0x8000		/* VIF = 3.3V */
-#define	INTA			0x0001	/* b1: USB INT-pin active */
-
-/* DMAx Pin Configuration Register */
-#define	DREQA			0x4000	/* b14: Dreq active select */
-#define	BURST			0x2000	/* b13: Burst mode */
-#define	DACKA			0x0400	/* b10: Dack active select */
-#define	DFORM			0x0380	/* b9-7: DMA mode select */
-#define	  CPU_ADR_RD_WR		 0x0000	  /* Address + RD/WR mode (CPU bus) */
-#define	  CPU_DACK_RD_WR	 0x0100	  /* DACK + RD/WR mode (CPU bus) */
-#define	  CPU_DACK_ONLY		 0x0180	  /* DACK only mode (CPU bus) */
-#define	  SPLIT_DACK_ONLY	 0x0200	  /* DACK only mode (SPLIT bus) */
-#define	DENDA			0x0040	/* b6: Dend active select */
-#define	PKTM			0x0020	/* b5: Packet mode */
-#define	DENDE			0x0010	/* b4: Dend enable */
-#define	OBUS			0x0004	/* b2: OUTbus mode */
-
-/* CFIFO/DxFIFO Port Select Register */
-#define	RCNT		0x8000	/* b15: Read count mode */
-#define	REW		0x4000	/* b14: Buffer rewind */
-#define	DCLRM		0x2000	/* b13: DMA buffer clear mode */
-#define	DREQE		0x1000	/* b12: DREQ output enable */
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
-#define	MBW		0x0800
-#else
-#define	MBW		0x0400	/* b10: Maximum bit width for FIFO access */
-#endif
-#define	  MBW_8		 0x0000	  /*  8bit */
-#define	  MBW_16	 0x0400	  /* 16bit */
-#define	BIGEND		0x0100	/* b8: Big endian mode */
-#define	  BYTE_LITTLE	 0x0000		/* little dendian */
-#define	  BYTE_BIG	 0x0100		/* big endifan */
-#define	ISEL		0x0020	/* b5: DCP FIFO port direction select */
-#define	CURPIPE		0x000F	/* b2-0: PIPE select */
-
-/* CFIFO/DxFIFO Port Control Register */
-#define	BVAL		0x8000	/* b15: Buffer valid flag */
-#define	BCLR		0x4000	/* b14: Buffer clear */
-#define	FRDY		0x2000	/* b13: FIFO ready */
-#define	DTLN		0x0FFF	/* b11-0: FIFO received data length */
-
-/* Interrupt Enable Register 0 */
-#define	VBSE	0x8000	/* b15: VBUS interrupt */
-#define	RSME	0x4000	/* b14: Resume interrupt */
-#define	SOFE	0x2000	/* b13: Frame update interrupt */
-#define	DVSE	0x1000	/* b12: Device state transition interrupt */
-#define	CTRE	0x0800	/* b11: Control transfer stage transition interrupt */
-#define	BEMPE	0x0400	/* b10: Buffer empty interrupt */
-#define	NRDYE	0x0200	/* b9: Buffer not ready interrupt */
-#define	BRDYE	0x0100	/* b8: Buffer ready interrupt */
-
-/* Interrupt Enable Register 1 */
-#define	OVRCRE		0x8000	/* b15: Over-current interrupt */
-#define	BCHGE		0x4000	/* b14: USB us chenge interrupt */
-#define	DTCHE		0x1000	/* b12: Detach sense interrupt */
-#define	ATTCHE		0x0800	/* b11: Attach sense interrupt */
-#define	EOFERRE		0x0040	/* b6: EOF error interrupt */
-#define	SIGNE		0x0020	/* b5: SETUP IGNORE interrupt */
-#define	SACKE		0x0010	/* b4: SETUP ACK interrupt */
-
-/* BRDY Interrupt Enable/Status Register */
-#define	BRDY9		0x0200	/* b9: PIPE9 */
-#define	BRDY8		0x0100	/* b8: PIPE8 */
-#define	BRDY7		0x0080	/* b7: PIPE7 */
-#define	BRDY6		0x0040	/* b6: PIPE6 */
-#define	BRDY5		0x0020	/* b5: PIPE5 */
-#define	BRDY4		0x0010	/* b4: PIPE4 */
-#define	BRDY3		0x0008	/* b3: PIPE3 */
-#define	BRDY2		0x0004	/* b2: PIPE2 */
-#define	BRDY1		0x0002	/* b1: PIPE1 */
-#define	BRDY0		0x0001	/* b1: PIPE0 */
-
-/* NRDY Interrupt Enable/Status Register */
-#define	NRDY9		0x0200	/* b9: PIPE9 */
-#define	NRDY8		0x0100	/* b8: PIPE8 */
-#define	NRDY7		0x0080	/* b7: PIPE7 */
-#define	NRDY6		0x0040	/* b6: PIPE6 */
-#define	NRDY5		0x0020	/* b5: PIPE5 */
-#define	NRDY4		0x0010	/* b4: PIPE4 */
-#define	NRDY3		0x0008	/* b3: PIPE3 */
-#define	NRDY2		0x0004	/* b2: PIPE2 */
-#define	NRDY1		0x0002	/* b1: PIPE1 */
-#define	NRDY0		0x0001	/* b1: PIPE0 */
-
-/* BEMP Interrupt Enable/Status Register */
-#define	BEMP9		0x0200	/* b9: PIPE9 */
-#define	BEMP8		0x0100	/* b8: PIPE8 */
-#define	BEMP7		0x0080	/* b7: PIPE7 */
-#define	BEMP6		0x0040	/* b6: PIPE6 */
-#define	BEMP5		0x0020	/* b5: PIPE5 */
-#define	BEMP4		0x0010	/* b4: PIPE4 */
-#define	BEMP3		0x0008	/* b3: PIPE3 */
-#define	BEMP2		0x0004	/* b2: PIPE2 */
-#define	BEMP1		0x0002	/* b1: PIPE1 */
-#define	BEMP0		0x0001	/* b0: PIPE0 */
-
-/* SOF Pin Configuration Register */
-#define	TRNENSEL	0x0100	/* b8: Select transaction enable period */
-#define	BRDYM		0x0040	/* b6: BRDY clear timing */
-#define	INTL		0x0020	/* b5: Interrupt sense select */
-#define	EDGESTS		0x0010	/* b4:  */
-#define	SOFMODE		0x000C	/* b3-2: SOF pin select */
-#define	  SOF_125US	 0x0008	  /* SOF OUT 125us Frame Signal */
-#define	  SOF_1MS	 0x0004	  /* SOF OUT 1ms Frame Signal */
-#define	  SOF_DISABLE	 0x0000	  /* SOF OUT Disable */
-
-/* Interrupt Status Register 0 */
-#define	VBINT	0x8000	/* b15: VBUS interrupt */
-#define	RESM	0x4000	/* b14: Resume interrupt */
-#define	SOFR	0x2000	/* b13: SOF frame update interrupt */
-#define	DVST	0x1000	/* b12: Device state transition interrupt */
-#define	CTRT	0x0800	/* b11: Control transfer stage transition interrupt */
-#define	BEMP	0x0400	/* b10: Buffer empty interrupt */
-#define	NRDY	0x0200	/* b9: Buffer not ready interrupt */
-#define	BRDY	0x0100	/* b8: Buffer ready interrupt */
-#define	VBSTS	0x0080	/* b7: VBUS input port */
-#define	DVSQ	0x0070	/* b6-4: Device state */
-#define	  DS_SPD_CNFG	 0x0070	  /* Suspend Configured */
-#define	  DS_SPD_ADDR	 0x0060	  /* Suspend Address */
-#define	  DS_SPD_DFLT	 0x0050	  /* Suspend Default */
-#define	  DS_SPD_POWR	 0x0040	  /* Suspend Powered */
-#define	  DS_SUSP	 0x0040	  /* Suspend */
-#define	  DS_CNFG	 0x0030	  /* Configured */
-#define	  DS_ADDS	 0x0020	  /* Address */
-#define	  DS_DFLT	 0x0010	  /* Default */
-#define	  DS_POWR	 0x0000	  /* Powered */
-#define	DVSQS		0x0030	/* b5-4: Device state */
-#define	VALID		0x0008	/* b3: Setup packet detected flag */
-#define	CTSQ		0x0007	/* b2-0: Control transfer stage */
-#define	  CS_SQER	 0x0006	  /* Sequence error */
-#define	  CS_WRND	 0x0005	  /* Control write nodata status stage */
-#define	  CS_WRSS	 0x0004	  /* Control write status stage */
-#define	  CS_WRDS	 0x0003	  /* Control write data stage */
-#define	  CS_RDSS	 0x0002	  /* Control read status stage */
-#define	  CS_RDDS	 0x0001	  /* Control read data stage */
-#define	  CS_IDST	 0x0000	  /* Idle or setup stage */
-
-/* Interrupt Status Register 1 */
-#define	OVRCR		0x8000	/* b15: Over-current interrupt */
-#define	BCHG		0x4000	/* b14: USB bus chenge interrupt */
-#define	DTCH		0x1000	/* b12: Detach sense interrupt */
-#define	ATTCH		0x0800	/* b11: Attach sense interrupt */
-#define	EOFERR		0x0040	/* b6: EOF-error interrupt */
-#define	SIGN		0x0020	/* b5: Setup ignore interrupt */
-#define	SACK		0x0010	/* b4: Setup acknowledge interrupt */
-
-/* Frame Number Register */
-#define	OVRN		0x8000	/* b15: Overrun error */
-#define	CRCE		0x4000	/* b14: Received data error */
-#define	FRNM		0x07FF	/* b10-0: Frame number */
-
-/* Micro Frame Number Register */
-#define	UFRNM		0x0007	/* b2-0: Micro frame number */
-
-/* Default Control Pipe Maxpacket Size Register */
-/* Pipe Maxpacket Size Register */
-#define	DEVSEL	0xF000	/* b15-14: Device address select */
-#define	MAXP	0x007F	/* b6-0: Maxpacket size of default control pipe */
-
-/* Default Control Pipe Control Register */
-#define	BSTS		0x8000	/* b15: Buffer status */
-#define	SUREQ		0x4000	/* b14: Send USB request  */
-#define	CSCLR		0x2000	/* b13: complete-split status clear */
-#define	CSSTS		0x1000	/* b12: complete-split status */
-#define	SUREQCLR	0x0800	/* b11: stop setup request */
-#define	SQCLR		0x0100	/* b8: Sequence toggle bit clear */
-#define	SQSET		0x0080	/* b7: Sequence toggle bit set */
-#define	SQMON		0x0040	/* b6: Sequence toggle bit monitor */
-#define	PBUSY		0x0020	/* b5: pipe busy */
-#define	PINGE		0x0010	/* b4: ping enable */
-#define	CCPL		0x0004	/* b2: Enable control transfer complete */
-#define	PID		0x0003	/* b1-0: Response PID */
-#define	  PID_STALL11	 0x0003	  /* STALL */
-#define	  PID_STALL	 0x0002	  /* STALL */
-#define	  PID_BUF	 0x0001	  /* BUF */
-#define	  PID_NAK	 0x0000	  /* NAK */
-
-/* Pipe Window Select Register */
-#define	PIPENM		0x0007	/* b2-0: Pipe select */
-
-/* Pipe Configuration Register */
-#define	R8A66597_TYP	0xC000	/* b15-14: Transfer type */
-#define	  R8A66597_ISO	 0xC000		  /* Isochronous */
-#define	  R8A66597_INT	 0x8000		  /* Interrupt */
-#define	  R8A66597_BULK	 0x4000		  /* Bulk */
-#define	R8A66597_BFRE	0x0400	/* b10: Buffer ready interrupt mode select */
-#define	R8A66597_DBLB	0x0200	/* b9: Double buffer mode select */
-#define	R8A66597_CNTMD	0x0100	/* b8: Continuous transfer mode select */
-#define	R8A66597_SHTNAK	0x0080	/* b7: Transfer end NAK */
-#define	R8A66597_DIR	0x0010	/* b4: Transfer direction select */
-#define	R8A66597_EPNUM	0x000F	/* b3-0: Eendpoint number select */
-
-/* Pipe Buffer Configuration Register */
-#define	BUFSIZE		0x7C00	/* b14-10: Pipe buffer size */
-#define	BUFNMB		0x007F	/* b6-0: Pipe buffer number */
-#define	PIPE0BUF	256
-#define	PIPExBUF	64
-
-/* Pipe Maxpacket Size Register */
-#define	MXPS		0x07FF	/* b10-0: Maxpacket size */
-
-/* Pipe Cycle Configuration Register */
-#define	IFIS	0x1000	/* b12: Isochronous in-buffer flush mode select */
-#define	IITV	0x0007	/* b2-0: Isochronous interval */
-
-/* Pipex Control Register */
-#define	BSTS	0x8000	/* b15: Buffer status */
-#define	INBUFM	0x4000	/* b14: IN buffer monitor (Only for PIPE1 to 5) */
-#define	CSCLR	0x2000	/* b13: complete-split status clear */
-#define	CSSTS	0x1000	/* b12: complete-split status */
-#define	ATREPM	0x0400	/* b10: Auto repeat mode */
-#define	ACLRM	0x0200	/* b9: Out buffer auto clear mode */
-#define	SQCLR	0x0100	/* b8: Sequence toggle bit clear */
-#define	SQSET	0x0080	/* b7: Sequence toggle bit set */
-#define	SQMON	0x0040	/* b6: Sequence toggle bit monitor */
-#define	PBUSY	0x0020	/* b5: pipe busy */
-#define	PID	0x0003	/* b1-0: Response PID */
-
-/* PIPExTRE */
-#define	TRENB		0x0200	/* b9: Transaction counter enable */
-#define	TRCLR		0x0100	/* b8: Transaction counter clear */
-
-/* PIPExTRN */
-#define	TRNCNT		0xFFFF	/* b15-0: Transaction counter */
-
-/* DEVADDx */
-#define	UPPHUB		0x7800
-#define	HUBPORT		0x0700
-#define	USBSPD		0x00C0
-#define	RTPORT		0x0001
-
 #define R8A66597_MAX_NUM_PIPE		10
 #define R8A66597_BUF_BSIZE		8
 #define R8A66597_MAX_DEVICE		10
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
-#define R8A66597_MAX_ROOT_HUB		1
-#else
 #define R8A66597_MAX_ROOT_HUB		2
-#endif
 #define R8A66597_MAX_SAMPLING		5
 #define R8A66597_RH_POLL_TIME		10
 #define R8A66597_MAX_DMA_CHANNEL	2
@@ -487,7 +113,7 @@ struct r8a66597_root_hub {
 struct r8a66597 {
 	spinlock_t lock;
 	unsigned long reg;
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
 	struct clk *clk;
 #endif
 	struct r8a66597_platdata	*pdata;
@@ -504,6 +130,7 @@ struct r8a66597 {
 	unsigned short interval_map;
 	unsigned char pipe_cnt[R8A66597_MAX_NUM_PIPE];
 	unsigned char dma_map;
+	unsigned int max_root_hub;
 
 	struct list_head child_device;
 	unsigned long child_connect_map[4];
@@ -550,21 +177,22 @@ static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
 				      unsigned long offset, u16 *buf,
 				      int len)
 {
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
 	unsigned long fifoaddr = r8a66597->reg + offset;
 	unsigned long count;
 
-	count = len / 4;
-	insl(fifoaddr, buf, count);
+	if (r8a66597->pdata->on_chip) {
+		count = len / 4;
+		insl(fifoaddr, buf, count);
 
-	if (len & 0x00000003) {
-		unsigned long tmp = inl(fifoaddr);
-		memcpy((unsigned char *)buf + count * 4, &tmp, len & 0x03);
+		if (len & 0x00000003) {
+			unsigned long tmp = inl(fifoaddr);
+			memcpy((unsigned char *)buf + count * 4, &tmp,
+			       len & 0x03);
+		}
+	} else {
+		len = (len + 1) / 2;
+		insw(fifoaddr, buf, len);
 	}
-#else
-	len = (len + 1) / 2;
-	insw(r8a66597->reg + offset, buf, len);
-#endif
 }
 
 static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val,
@@ -578,33 +206,33 @@ static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
 				       int len)
 {
 	unsigned long fifoaddr = r8a66597->reg + offset;
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
 	unsigned long count;
 	unsigned char *pb;
 	int i;
 
-	count = len / 4;
-	outsl(fifoaddr, buf, count);
+	if (r8a66597->pdata->on_chip) {
+		count = len / 4;
+		outsl(fifoaddr, buf, count);
+
+		if (len & 0x00000003) {
+			pb = (unsigned char *)buf + count * 4;
+			for (i = 0; i < (len & 0x00000003); i++) {
+				if (r8a66597_read(r8a66597, CFIFOSEL) & BIGEND)
+					outb(pb[i], fifoaddr + i);
+				else
+					outb(pb[i], fifoaddr + 3 - i);
+			}
+		}
+	} else {
+		int odd = len & 0x0001;
 
-	if (len & 0x00000003) {
-		pb = (unsigned char *)buf + count * 4;
-		for (i = 0; i < (len & 0x00000003); i++) {
-			if (r8a66597_read(r8a66597, CFIFOSEL) & BIGEND)
-				outb(pb[i], fifoaddr + i);
-			else
-				outb(pb[i], fifoaddr + 3 - i);
+		len = len / 2;
+		outsw(fifoaddr, buf, len);
+		if (unlikely(odd)) {
+			buf = &buf[len];
+			outb((unsigned char)*buf, fifoaddr);
 		}
 	}
-#else
-	int odd = len & 0x0001;
-
-	len = len / 2;
-	outsw(fifoaddr, buf, len);
-	if (unlikely(odd)) {
-		buf = &buf[len];
-		outb((unsigned char)*buf, fifoaddr);
-	}
-#endif
 }
 
 static inline void r8a66597_mdfy(struct r8a66597 *r8a66597,
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index a949259f18b9..5b22a4d1c9e4 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -719,8 +719,12 @@ retry:
 		/* port status seems weird until after reset, so
 		 * force the reset and make khubd clean up later.
 		 */
-		sl811->port1 |= (1 << USB_PORT_FEAT_C_CONNECTION)
-				| (1 << USB_PORT_FEAT_CONNECTION);
+		if (sl811->stat_insrmv & 1)
+			sl811->port1 |= 1 << USB_PORT_FEAT_CONNECTION;
+		else
+			sl811->port1 &= ~(1 << USB_PORT_FEAT_CONNECTION);
+
+		sl811->port1 |= 1 << USB_PORT_FEAT_C_CONNECTION;
 
 	} else if (irqstat & SL11H_INTMASK_RD) {
 		if (sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND)) {
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index 64e57bfe236b..acd582c02802 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -1422,7 +1422,6 @@ static int uhci_urb_enqueue(struct usb_hcd *hcd,
 		goto err_submit_failed;
 
 	/* Add this URB to the QH */
-	urbp->qh = qh;
 	list_add_tail(&urbp->node, &qh->queue);
 
 	/* If the new URB is the first and only one on this QH then either
diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c
index c2050785a819..c632437c7649 100644
--- a/drivers/usb/host/whci/asl.c
+++ b/drivers/usb/host/whci/asl.c
@@ -227,11 +227,21 @@ void scan_async_work(struct work_struct *work)
 	/*
 	 * Now that the ASL is updated, complete the removal of any
 	 * removed qsets.
+	 *
+	 * If the qset was to be reset, do so and reinsert it into the
+	 * ASL if it has pending transfers.
 	 */
 	spin_lock_irq(&whc->lock);
 
 	list_for_each_entry_safe(qset, t, &whc->async_removed_list, list_node) {
 		qset_remove_complete(whc, qset);
+		if (qset->reset) {
+			qset_reset(whc, qset);
+			if (!list_empty(&qset->stds)) {
+				asl_qset_insert_begin(whc, qset);
+				queue_work(whc->workqueue, &whc->async_work);
+			}
+		}
 	}
 
 	spin_unlock_irq(&whc->lock);
@@ -267,7 +277,7 @@ int asl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags)
 	else
 		err = qset_add_urb(whc, qset, urb, GFP_ATOMIC);
 	if (!err) {
-		if (!qset->in_sw_list)
+		if (!qset->in_sw_list && !qset->remove)
 			asl_qset_insert_begin(whc, qset);
 	} else
 		usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb);
diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c
index e019a5058ab8..687b622a1612 100644
--- a/drivers/usb/host/whci/hcd.c
+++ b/drivers/usb/host/whci/hcd.c
@@ -192,19 +192,23 @@ static void whc_endpoint_reset(struct usb_hcd *usb_hcd,
 	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
 	struct whc *whc = wusbhc_to_whc(wusbhc);
 	struct whc_qset *qset;
+	unsigned long flags;
+
+	spin_lock_irqsave(&whc->lock, flags);
 
 	qset = ep->hcpriv;
 	if (qset) {
 		qset->remove = 1;
+		qset->reset = 1;
 
 		if (usb_endpoint_xfer_bulk(&ep->desc)
 		    || usb_endpoint_xfer_control(&ep->desc))
 			queue_work(whc->workqueue, &whc->async_work);
 		else
 			queue_work(whc->workqueue, &whc->periodic_work);
-
-		qset_reset(whc, qset);
 	}
+
+	spin_unlock_irqrestore(&whc->lock, flags);
 }
 
 
diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c
index ff4ef9e910d9..a9e05bac6646 100644
--- a/drivers/usb/host/whci/pzl.c
+++ b/drivers/usb/host/whci/pzl.c
@@ -255,11 +255,21 @@ void scan_periodic_work(struct work_struct *work)
 	/*
 	 * Now that the PZL is updated, complete the removal of any
 	 * removed qsets.
+	 *
+	 * If the qset was to be reset, do so and reinsert it into the
+	 * PZL if it has pending transfers.
 	 */
 	spin_lock_irq(&whc->lock);
 
 	list_for_each_entry_safe(qset, t, &whc->periodic_removed_list, list_node) {
 		qset_remove_complete(whc, qset);
+		if (qset->reset) {
+			qset_reset(whc, qset);
+			if (!list_empty(&qset->stds)) {
+				qset_insert_in_sw_list(whc, qset);
+				queue_work(whc->workqueue, &whc->periodic_work);
+			}
+		}
 	}
 
 	spin_unlock_irq(&whc->lock);
@@ -295,7 +305,7 @@ int pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags)
 	else
 		err = qset_add_urb(whc, qset, urb, GFP_ATOMIC);
 	if (!err) {
-		if (!qset->in_sw_list)
+		if (!qset->in_sw_list && !qset->remove)
 			qset_insert_in_sw_list(whc, qset);
 	} else
 		usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb);
diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c
index 640b38fbd051..1b9dc1571570 100644
--- a/drivers/usb/host/whci/qset.c
+++ b/drivers/usb/host/whci/qset.c
@@ -103,7 +103,6 @@ static void qset_fill_qh(struct whc_qset *qset, struct urb *urb)
 void qset_clear(struct whc *whc, struct whc_qset *qset)
 {
 	qset->td_start = qset->td_end = qset->ntds = 0;
-	qset->remove = 0;
 
 	qset->qh.link = cpu_to_le32(QH_LINK_NTDS(8) | QH_LINK_T);
 	qset->qh.status = qset->qh.status & QH_STATUS_SEQ_MASK;
@@ -125,7 +124,7 @@ void qset_clear(struct whc *whc, struct whc_qset *qset)
  */
 void qset_reset(struct whc *whc, struct whc_qset *qset)
 {
-	wait_for_completion(&qset->remove_complete);
+	qset->reset = 0;
 
 	qset->qh.status &= ~QH_STATUS_SEQ_MASK;
 	qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1);
@@ -156,6 +155,7 @@ struct whc_qset *get_qset(struct whc *whc, struct urb *urb,
 
 void qset_remove_complete(struct whc *whc, struct whc_qset *qset)
 {
+	qset->remove = 0;
 	list_del_init(&qset->list_node);
 	complete(&qset->remove_complete);
 }
diff --git a/drivers/usb/host/whci/whci-hc.h b/drivers/usb/host/whci/whci-hc.h
index 794dba0d0f0a..e8d0001605be 100644
--- a/drivers/usb/host/whci/whci-hc.h
+++ b/drivers/usb/host/whci/whci-hc.h
@@ -264,6 +264,7 @@ struct whc_qset {
 	unsigned in_sw_list:1;
 	unsigned in_hw_list:1;
 	unsigned remove:1;
+	unsigned reset:1;
 	struct urb *pause_after_urb;
 	struct completion remove_complete;
 	int max_burst;
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index 705e34324156..33128d52f212 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -413,7 +413,8 @@ void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx)
 	int i;
 
 	struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx);
-	dma_addr_t dma = ctx->dma + ((unsigned long)slot_ctx - (unsigned long)ctx);
+	dma_addr_t dma = ctx->dma +
+		((unsigned long)slot_ctx - (unsigned long)ctx->bytes);
 	int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params);
 
 	xhci_dbg(xhci, "Slot Context:\n");
@@ -459,7 +460,7 @@ void xhci_dbg_ep_ctx(struct xhci_hcd *xhci,
 	for (i = 0; i < last_ep_ctx; ++i) {
 		struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, ctx, i);
 		dma_addr_t dma = ctx->dma +
-			((unsigned long)ep_ctx - (unsigned long)ctx);
+			((unsigned long)ep_ctx - (unsigned long)ctx->bytes);
 
 		xhci_dbg(xhci, "Endpoint %02d Context:\n", i);
 		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info\n",
diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c
index 816c39caca1c..99911e727e0b 100644
--- a/drivers/usb/host/xhci-hcd.c
+++ b/drivers/usb/host/xhci-hcd.c
@@ -22,12 +22,18 @@
 
 #include <linux/irq.h>
 #include <linux/module.h>
+#include <linux/moduleparam.h>
 
 #include "xhci.h"
 
 #define DRIVER_AUTHOR "Sarah Sharp"
 #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
 
+/* Some 0.95 hardware can't handle the chain bit on a Link TRB being cleared */
+static int link_quirk;
+module_param(link_quirk, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB");
+
 /* TODO: copied from ehci-hcd.c - can this be refactored? */
 /*
  * handshake - spin reading hc until handshake completes or fails
@@ -214,6 +220,12 @@ int xhci_init(struct usb_hcd *hcd)
 
 	xhci_dbg(xhci, "xhci_init\n");
 	spin_lock_init(&xhci->lock);
+	if (link_quirk) {
+		xhci_dbg(xhci, "QUIRK: Not clearing Link TRB chain bits.\n");
+		xhci->quirks |= XHCI_LINK_TRB_QUIRK;
+	} else {
+		xhci_dbg(xhci, "xHCI doesn't need link TRB QUIRK\n");
+	}
 	retval = xhci_mem_init(xhci, GFP_KERNEL);
 	xhci_dbg(xhci, "Finished xhci_init\n");
 
@@ -339,13 +351,14 @@ void xhci_event_ring_work(unsigned long arg)
 	xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
 	xhci_dbg_cmd_ptrs(xhci);
 	for (i = 0; i < MAX_HC_SLOTS; ++i) {
-		if (xhci->devs[i]) {
-			for (j = 0; j < 31; ++j) {
-				if (xhci->devs[i]->ep_rings[j]) {
-					xhci_dbg(xhci, "Dev %d endpoint ring %d:\n", i, j);
-					xhci_debug_segment(xhci, xhci->devs[i]->ep_rings[j]->deq_seg);
-				}
-			}
+		if (!xhci->devs[i])
+			continue;
+		for (j = 0; j < 31; ++j) {
+			struct xhci_ring *ring = xhci->devs[i]->eps[j].ring;
+			if (!ring)
+				continue;
+			xhci_dbg(xhci, "Dev %d endpoint ring %d:\n", i, j);
+			xhci_debug_segment(xhci, ring->deq_seg);
 		}
 	}
 
@@ -555,13 +568,22 @@ unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc)
 	return 1 << (xhci_get_endpoint_index(desc) + 1);
 }
 
+/* Find the flag for this endpoint (for use in the control context).  Use the
+ * endpoint index to create a bitmask.  The slot context is bit 0, endpoint 0 is
+ * bit 1, etc.
+ */
+unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index)
+{
+	return 1 << (ep_index + 1);
+}
+
 /* Compute the last valid endpoint context index.  Basically, this is the
  * endpoint index plus one.  For slot contexts with more than valid endpoint,
  * we find the most significant bit set in the added contexts flags.
  * e.g. ep 1 IN (with epnum 0x81) => added_ctxs = 0b1000
  * fls(0b1000) = 4, but the endpoint context index is 3, so subtract one.
  */
-static inline unsigned int xhci_last_valid_endpoint(u32 added_ctxs)
+unsigned int xhci_last_valid_endpoint(u32 added_ctxs)
 {
 	return fls(added_ctxs) - 1;
 }
@@ -589,6 +611,71 @@ int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev,
 	return 1;
 }
 
+static int xhci_configure_endpoint(struct xhci_hcd *xhci,
+		struct usb_device *udev, struct xhci_command *command,
+		bool ctx_change, bool must_succeed);
+
+/*
+ * Full speed devices may have a max packet size greater than 8 bytes, but the
+ * USB core doesn't know that until it reads the first 8 bytes of the
+ * descriptor.  If the usb_device's max packet size changes after that point,
+ * we need to issue an evaluate context command and wait on it.
+ */
+static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
+		unsigned int ep_index, struct urb *urb)
+{
+	struct xhci_container_ctx *in_ctx;
+	struct xhci_container_ctx *out_ctx;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_ep_ctx *ep_ctx;
+	int max_packet_size;
+	int hw_max_packet_size;
+	int ret = 0;
+
+	out_ctx = xhci->devs[slot_id]->out_ctx;
+	ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
+	hw_max_packet_size = MAX_PACKET_DECODED(ep_ctx->ep_info2);
+	max_packet_size = urb->dev->ep0.desc.wMaxPacketSize;
+	if (hw_max_packet_size != max_packet_size) {
+		xhci_dbg(xhci, "Max Packet Size for ep 0 changed.\n");
+		xhci_dbg(xhci, "Max packet size in usb_device = %d\n",
+				max_packet_size);
+		xhci_dbg(xhci, "Max packet size in xHCI HW = %d\n",
+				hw_max_packet_size);
+		xhci_dbg(xhci, "Issuing evaluate context command.\n");
+
+		/* Set up the modified control endpoint 0 */
+		xhci_endpoint_copy(xhci, xhci->devs[slot_id]->in_ctx,
+				xhci->devs[slot_id]->out_ctx, ep_index);
+		in_ctx = xhci->devs[slot_id]->in_ctx;
+		ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
+		ep_ctx->ep_info2 &= ~MAX_PACKET_MASK;
+		ep_ctx->ep_info2 |= MAX_PACKET(max_packet_size);
+
+		/* Set up the input context flags for the command */
+		/* FIXME: This won't work if a non-default control endpoint
+		 * changes max packet sizes.
+		 */
+		ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+		ctrl_ctx->add_flags = EP0_FLAG;
+		ctrl_ctx->drop_flags = 0;
+
+		xhci_dbg(xhci, "Slot %d input context\n", slot_id);
+		xhci_dbg_ctx(xhci, in_ctx, ep_index);
+		xhci_dbg(xhci, "Slot %d output context\n", slot_id);
+		xhci_dbg_ctx(xhci, out_ctx, ep_index);
+
+		ret = xhci_configure_endpoint(xhci, urb->dev, NULL,
+				true, false);
+
+		/* Clean up the input context for later use by bandwidth
+		 * functions.
+		 */
+		ctrl_ctx->add_flags = SLOT_FLAG;
+	}
+	return ret;
+}
+
 /*
  * non-error returns are a promise to giveback() the urb later
  * we drop ownership so next owner (or urb unlink) can get it
@@ -600,13 +687,13 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
 	int ret = 0;
 	unsigned int slot_id, ep_index;
 
+
 	if (!urb || xhci_check_args(hcd, urb->dev, urb->ep, true, __func__) <= 0)
 		return -EINVAL;
 
 	slot_id = urb->dev->slot_id;
 	ep_index = xhci_get_endpoint_index(&urb->ep->desc);
 
-	spin_lock_irqsave(&xhci->lock, flags);
 	if (!xhci->devs || !xhci->devs[slot_id]) {
 		if (!in_interrupt())
 			dev_warn(&urb->dev->dev, "WARN: urb submitted for dev with no Slot ID\n");
@@ -619,19 +706,38 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
 		ret = -ESHUTDOWN;
 		goto exit;
 	}
-	if (usb_endpoint_xfer_control(&urb->ep->desc))
+	if (usb_endpoint_xfer_control(&urb->ep->desc)) {
+		/* Check to see if the max packet size for the default control
+		 * endpoint changed during FS device enumeration
+		 */
+		if (urb->dev->speed == USB_SPEED_FULL) {
+			ret = xhci_check_maxpacket(xhci, slot_id,
+					ep_index, urb);
+			if (ret < 0)
+				return ret;
+		}
+
 		/* We have a spinlock and interrupts disabled, so we must pass
 		 * atomic context to this function, which may allocate memory.
 		 */
+		spin_lock_irqsave(&xhci->lock, flags);
 		ret = xhci_queue_ctrl_tx(xhci, GFP_ATOMIC, urb,
 				slot_id, ep_index);
-	else if (usb_endpoint_xfer_bulk(&urb->ep->desc))
+		spin_unlock_irqrestore(&xhci->lock, flags);
+	} else if (usb_endpoint_xfer_bulk(&urb->ep->desc)) {
+		spin_lock_irqsave(&xhci->lock, flags);
 		ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb,
 				slot_id, ep_index);
-	else
+		spin_unlock_irqrestore(&xhci->lock, flags);
+	} else if (usb_endpoint_xfer_int(&urb->ep->desc)) {
+		spin_lock_irqsave(&xhci->lock, flags);
+		ret = xhci_queue_intr_tx(xhci, GFP_ATOMIC, urb,
+				slot_id, ep_index);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+	} else {
 		ret = -EINVAL;
+	}
 exit:
-	spin_unlock_irqrestore(&xhci->lock, flags);
 	return ret;
 }
 
@@ -674,6 +780,7 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 	struct xhci_td *td;
 	unsigned int ep_index;
 	struct xhci_ring *ep_ring;
+	struct xhci_virt_ep *ep;
 
 	xhci = hcd_to_xhci(hcd);
 	spin_lock_irqsave(&xhci->lock, flags);
@@ -686,17 +793,18 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 	xhci_dbg(xhci, "Event ring:\n");
 	xhci_debug_ring(xhci, xhci->event_ring);
 	ep_index = xhci_get_endpoint_index(&urb->ep->desc);
-	ep_ring = xhci->devs[urb->dev->slot_id]->ep_rings[ep_index];
+	ep = &xhci->devs[urb->dev->slot_id]->eps[ep_index];
+	ep_ring = ep->ring;
 	xhci_dbg(xhci, "Endpoint ring:\n");
 	xhci_debug_ring(xhci, ep_ring);
 	td = (struct xhci_td *) urb->hcpriv;
 
-	ep_ring->cancels_pending++;
-	list_add_tail(&td->cancelled_td_list, &ep_ring->cancelled_td_list);
+	ep->cancels_pending++;
+	list_add_tail(&td->cancelled_td_list, &ep->cancelled_td_list);
 	/* Queue a stop endpoint command, but only if this is
 	 * the first cancellation to be handled.
 	 */
-	if (ep_ring->cancels_pending == 1) {
+	if (ep->cancels_pending == 1) {
 		xhci_queue_stop_endpoint(xhci, urb->dev->slot_id, ep_index);
 		xhci_ring_cmd_db(xhci);
 	}
@@ -930,6 +1038,141 @@ static void xhci_zero_in_ctx(struct xhci_hcd *xhci, struct xhci_virt_device *vir
 	}
 }
 
+static int xhci_configure_endpoint_result(struct xhci_hcd *xhci,
+		struct usb_device *udev, int *cmd_status)
+{
+	int ret;
+
+	switch (*cmd_status) {
+	case COMP_ENOMEM:
+		dev_warn(&udev->dev, "Not enough host controller resources "
+				"for new device state.\n");
+		ret = -ENOMEM;
+		/* FIXME: can we allocate more resources for the HC? */
+		break;
+	case COMP_BW_ERR:
+		dev_warn(&udev->dev, "Not enough bandwidth "
+				"for new device state.\n");
+		ret = -ENOSPC;
+		/* FIXME: can we go back to the old state? */
+		break;
+	case COMP_TRB_ERR:
+		/* the HCD set up something wrong */
+		dev_warn(&udev->dev, "ERROR: Endpoint drop flag = 0, "
+				"add flag = 1, "
+				"and endpoint is not disabled.\n");
+		ret = -EINVAL;
+		break;
+	case COMP_SUCCESS:
+		dev_dbg(&udev->dev, "Successful Endpoint Configure command\n");
+		ret = 0;
+		break;
+	default:
+		xhci_err(xhci, "ERROR: unexpected command completion "
+				"code 0x%x.\n", *cmd_status);
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static int xhci_evaluate_context_result(struct xhci_hcd *xhci,
+		struct usb_device *udev, int *cmd_status)
+{
+	int ret;
+	struct xhci_virt_device *virt_dev = xhci->devs[udev->slot_id];
+
+	switch (*cmd_status) {
+	case COMP_EINVAL:
+		dev_warn(&udev->dev, "WARN: xHCI driver setup invalid evaluate "
+				"context command.\n");
+		ret = -EINVAL;
+		break;
+	case COMP_EBADSLT:
+		dev_warn(&udev->dev, "WARN: slot not enabled for"
+				"evaluate context command.\n");
+	case COMP_CTX_STATE:
+		dev_warn(&udev->dev, "WARN: invalid context state for "
+				"evaluate context command.\n");
+		xhci_dbg_ctx(xhci, virt_dev->out_ctx, 1);
+		ret = -EINVAL;
+		break;
+	case COMP_SUCCESS:
+		dev_dbg(&udev->dev, "Successful evaluate context command\n");
+		ret = 0;
+		break;
+	default:
+		xhci_err(xhci, "ERROR: unexpected command completion "
+				"code 0x%x.\n", *cmd_status);
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+/* Issue a configure endpoint command or evaluate context command
+ * and wait for it to finish.
+ */
+static int xhci_configure_endpoint(struct xhci_hcd *xhci,
+		struct usb_device *udev,
+		struct xhci_command *command,
+		bool ctx_change, bool must_succeed)
+{
+	int ret;
+	int timeleft;
+	unsigned long flags;
+	struct xhci_container_ctx *in_ctx;
+	struct completion *cmd_completion;
+	int *cmd_status;
+	struct xhci_virt_device *virt_dev;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	virt_dev = xhci->devs[udev->slot_id];
+	if (command) {
+		in_ctx = command->in_ctx;
+		cmd_completion = command->completion;
+		cmd_status = &command->status;
+		command->command_trb = xhci->cmd_ring->enqueue;
+		list_add_tail(&command->cmd_list, &virt_dev->cmd_list);
+	} else {
+		in_ctx = virt_dev->in_ctx;
+		cmd_completion = &virt_dev->cmd_completion;
+		cmd_status = &virt_dev->cmd_status;
+	}
+
+	if (!ctx_change)
+		ret = xhci_queue_configure_endpoint(xhci, in_ctx->dma,
+				udev->slot_id, must_succeed);
+	else
+		ret = xhci_queue_evaluate_context(xhci, in_ctx->dma,
+				udev->slot_id);
+	if (ret < 0) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_dbg(xhci, "FIXME allocate a new ring segment\n");
+		return -ENOMEM;
+	}
+	xhci_ring_cmd_db(xhci);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	/* Wait for the configure endpoint command to complete */
+	timeleft = wait_for_completion_interruptible_timeout(
+			cmd_completion,
+			USB_CTRL_SET_TIMEOUT);
+	if (timeleft <= 0) {
+		xhci_warn(xhci, "%s while waiting for %s command\n",
+				timeleft == 0 ? "Timeout" : "Signal",
+				ctx_change == 0 ?
+					"configure endpoint" :
+					"evaluate context");
+		/* FIXME cancel the configure endpoint command */
+		return -ETIME;
+	}
+
+	if (!ctx_change)
+		return xhci_configure_endpoint_result(xhci, udev, cmd_status);
+	return xhci_evaluate_context_result(xhci, udev, cmd_status);
+}
+
 /* Called after one or more calls to xhci_add_endpoint() or
  * xhci_drop_endpoint().  If this call fails, the USB core is expected
  * to call xhci_reset_bandwidth().
@@ -944,8 +1187,6 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 {
 	int i;
 	int ret = 0;
-	int timeleft;
-	unsigned long flags;
 	struct xhci_hcd *xhci;
 	struct xhci_virt_device	*virt_dev;
 	struct xhci_input_control_ctx *ctrl_ctx;
@@ -975,56 +1216,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 	xhci_dbg_ctx(xhci, virt_dev->in_ctx,
 			LAST_CTX_TO_EP_NUM(slot_ctx->dev_info));
 
-	spin_lock_irqsave(&xhci->lock, flags);
-	ret = xhci_queue_configure_endpoint(xhci, virt_dev->in_ctx->dma,
-			udev->slot_id);
-	if (ret < 0) {
-		spin_unlock_irqrestore(&xhci->lock, flags);
-		xhci_dbg(xhci, "FIXME allocate a new ring segment\n");
-		return -ENOMEM;
-	}
-	xhci_ring_cmd_db(xhci);
-	spin_unlock_irqrestore(&xhci->lock, flags);
-
-	/* Wait for the configure endpoint command to complete */
-	timeleft = wait_for_completion_interruptible_timeout(
-			&virt_dev->cmd_completion,
-			USB_CTRL_SET_TIMEOUT);
-	if (timeleft <= 0) {
-		xhci_warn(xhci, "%s while waiting for configure endpoint command\n",
-				timeleft == 0 ? "Timeout" : "Signal");
-		/* FIXME cancel the configure endpoint command */
-		return -ETIME;
-	}
-
-	switch (virt_dev->cmd_status) {
-	case COMP_ENOMEM:
-		dev_warn(&udev->dev, "Not enough host controller resources "
-				"for new device state.\n");
-		ret = -ENOMEM;
-		/* FIXME: can we allocate more resources for the HC? */
-		break;
-	case COMP_BW_ERR:
-		dev_warn(&udev->dev, "Not enough bandwidth "
-				"for new device state.\n");
-		ret = -ENOSPC;
-		/* FIXME: can we go back to the old state? */
-		break;
-	case COMP_TRB_ERR:
-		/* the HCD set up something wrong */
-		dev_warn(&udev->dev, "ERROR: Endpoint drop flag = 0, add flag = 1, "
-				"and endpoint is not disabled.\n");
-		ret = -EINVAL;
-		break;
-	case COMP_SUCCESS:
-		dev_dbg(&udev->dev, "Successful Endpoint Configure command\n");
-		break;
-	default:
-		xhci_err(xhci, "ERROR: unexpected command completion "
-				"code 0x%x.\n", virt_dev->cmd_status);
-		ret = -EINVAL;
-		break;
-	}
+	ret = xhci_configure_endpoint(xhci, udev, NULL,
+			false, false);
 	if (ret) {
 		/* Callee should call reset_bandwidth() */
 		return ret;
@@ -1037,10 +1230,10 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 	xhci_zero_in_ctx(xhci, virt_dev);
 	/* Free any old rings */
 	for (i = 1; i < 31; ++i) {
-		if (virt_dev->new_ep_rings[i]) {
-			xhci_ring_free(xhci, virt_dev->ep_rings[i]);
-			virt_dev->ep_rings[i] = virt_dev->new_ep_rings[i];
-			virt_dev->new_ep_rings[i] = NULL;
+		if (virt_dev->eps[i].new_ring) {
+			xhci_ring_free(xhci, virt_dev->eps[i].ring);
+			virt_dev->eps[i].ring = virt_dev->eps[i].new_ring;
+			virt_dev->eps[i].new_ring = NULL;
 		}
 	}
 
@@ -1067,14 +1260,93 @@ void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 	virt_dev = xhci->devs[udev->slot_id];
 	/* Free any rings allocated for added endpoints */
 	for (i = 0; i < 31; ++i) {
-		if (virt_dev->new_ep_rings[i]) {
-			xhci_ring_free(xhci, virt_dev->new_ep_rings[i]);
-			virt_dev->new_ep_rings[i] = NULL;
+		if (virt_dev->eps[i].new_ring) {
+			xhci_ring_free(xhci, virt_dev->eps[i].new_ring);
+			virt_dev->eps[i].new_ring = NULL;
 		}
 	}
 	xhci_zero_in_ctx(xhci, virt_dev);
 }
 
+static void xhci_setup_input_ctx_for_config_ep(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *in_ctx,
+		struct xhci_container_ctx *out_ctx,
+		u32 add_flags, u32 drop_flags)
+{
+	struct xhci_input_control_ctx *ctrl_ctx;
+	ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+	ctrl_ctx->add_flags = add_flags;
+	ctrl_ctx->drop_flags = drop_flags;
+	xhci_slot_copy(xhci, in_ctx, out_ctx);
+	ctrl_ctx->add_flags |= SLOT_FLAG;
+
+	xhci_dbg(xhci, "Input Context:\n");
+	xhci_dbg_ctx(xhci, in_ctx, xhci_last_valid_endpoint(add_flags));
+}
+
+void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci,
+		unsigned int slot_id, unsigned int ep_index,
+		struct xhci_dequeue_state *deq_state)
+{
+	struct xhci_container_ctx *in_ctx;
+	struct xhci_ep_ctx *ep_ctx;
+	u32 added_ctxs;
+	dma_addr_t addr;
+
+	xhci_endpoint_copy(xhci, xhci->devs[slot_id]->in_ctx,
+			xhci->devs[slot_id]->out_ctx, ep_index);
+	in_ctx = xhci->devs[slot_id]->in_ctx;
+	ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
+	addr = xhci_trb_virt_to_dma(deq_state->new_deq_seg,
+			deq_state->new_deq_ptr);
+	if (addr == 0) {
+		xhci_warn(xhci, "WARN Cannot submit config ep after "
+				"reset ep command\n");
+		xhci_warn(xhci, "WARN deq seg = %p, deq ptr = %p\n",
+				deq_state->new_deq_seg,
+				deq_state->new_deq_ptr);
+		return;
+	}
+	ep_ctx->deq = addr | deq_state->new_cycle_state;
+
+	added_ctxs = xhci_get_endpoint_flag_from_index(ep_index);
+	xhci_setup_input_ctx_for_config_ep(xhci, xhci->devs[slot_id]->in_ctx,
+			xhci->devs[slot_id]->out_ctx, added_ctxs, added_ctxs);
+}
+
+void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
+		struct usb_device *udev, unsigned int ep_index)
+{
+	struct xhci_dequeue_state deq_state;
+	struct xhci_virt_ep *ep;
+
+	xhci_dbg(xhci, "Cleaning up stalled endpoint ring\n");
+	ep = &xhci->devs[udev->slot_id]->eps[ep_index];
+	/* We need to move the HW's dequeue pointer past this TD,
+	 * or it will attempt to resend it on the next doorbell ring.
+	 */
+	xhci_find_new_dequeue_state(xhci, udev->slot_id,
+			ep_index, ep->stopped_td,
+			&deq_state);
+
+	/* HW with the reset endpoint quirk will use the saved dequeue state to
+	 * issue a configure endpoint command later.
+	 */
+	if (!(xhci->quirks & XHCI_RESET_EP_QUIRK)) {
+		xhci_dbg(xhci, "Queueing new dequeue state\n");
+		xhci_queue_new_dequeue_state(xhci, udev->slot_id,
+				ep_index, &deq_state);
+	} else {
+		/* Better hope no one uses the input context between now and the
+		 * reset endpoint completion!
+		 */
+		xhci_dbg(xhci, "Setting up input context for "
+				"configure endpoint command\n");
+		xhci_setup_input_ctx_for_quirk(xhci, udev->slot_id,
+				ep_index, &deq_state);
+	}
+}
+
 /* Deal with stalled endpoints.  The core should have sent the control message
  * to clear the halt condition.  However, we need to make the xHCI hardware
  * reset its sequence number, since a device will expect a sequence number of
@@ -1089,8 +1361,7 @@ void xhci_endpoint_reset(struct usb_hcd *hcd,
 	unsigned int ep_index;
 	unsigned long flags;
 	int ret;
-	struct xhci_dequeue_state deq_state;
-	struct xhci_ring *ep_ring;
+	struct xhci_virt_ep *virt_ep;
 
 	xhci = hcd_to_xhci(hcd);
 	udev = (struct usb_device *) ep->hcpriv;
@@ -1100,12 +1371,16 @@ void xhci_endpoint_reset(struct usb_hcd *hcd,
 	if (!ep->hcpriv)
 		return;
 	ep_index = xhci_get_endpoint_index(&ep->desc);
-	ep_ring = xhci->devs[udev->slot_id]->ep_rings[ep_index];
-	if (!ep_ring->stopped_td) {
+	virt_ep = &xhci->devs[udev->slot_id]->eps[ep_index];
+	if (!virt_ep->stopped_td) {
 		xhci_dbg(xhci, "Endpoint 0x%x not halted, refusing to reset.\n",
 				ep->desc.bEndpointAddress);
 		return;
 	}
+	if (usb_endpoint_xfer_control(&ep->desc)) {
+		xhci_dbg(xhci, "Control endpoint stall already handled.\n");
+		return;
+	}
 
 	xhci_dbg(xhci, "Queueing reset endpoint command\n");
 	spin_lock_irqsave(&xhci->lock, flags);
@@ -1116,17 +1391,8 @@ void xhci_endpoint_reset(struct usb_hcd *hcd,
 	 * command.  Better hope that last command worked!
 	 */
 	if (!ret) {
-		xhci_dbg(xhci, "Cleaning up stalled endpoint ring\n");
-		/* We need to move the HW's dequeue pointer past this TD,
-		 * or it will attempt to resend it on the next doorbell ring.
-		 */
-		xhci_find_new_dequeue_state(xhci, udev->slot_id,
-				ep_index, ep_ring->stopped_td, &deq_state);
-		xhci_dbg(xhci, "Queueing new dequeue state\n");
-		xhci_queue_new_dequeue_state(xhci, ep_ring,
-				udev->slot_id,
-				ep_index, &deq_state);
-		kfree(ep_ring->stopped_td);
+		xhci_cleanup_stalled_ring(xhci, udev, ep_index);
+		kfree(virt_ep->stopped_td);
 		xhci_ring_cmd_db(xhci);
 	}
 	spin_unlock_irqrestore(&xhci->lock, flags);
@@ -1328,6 +1594,88 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 	return 0;
 }
 
+/* Once a hub descriptor is fetched for a device, we need to update the xHC's
+ * internal data structures for the device.
+ */
+int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
+			struct usb_tt *tt, gfp_t mem_flags)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	struct xhci_virt_device *vdev;
+	struct xhci_command *config_cmd;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_slot_ctx *slot_ctx;
+	unsigned long flags;
+	unsigned think_time;
+	int ret;
+
+	/* Ignore root hubs */
+	if (!hdev->parent)
+		return 0;
+
+	vdev = xhci->devs[hdev->slot_id];
+	if (!vdev) {
+		xhci_warn(xhci, "Cannot update hub desc for unknown device.\n");
+		return -EINVAL;
+	}
+	config_cmd = xhci_alloc_command(xhci, true, mem_flags);
+	if (!config_cmd) {
+		xhci_dbg(xhci, "Could not allocate xHCI command structure.\n");
+		return -ENOMEM;
+	}
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	xhci_slot_copy(xhci, config_cmd->in_ctx, vdev->out_ctx);
+	ctrl_ctx = xhci_get_input_control_ctx(xhci, config_cmd->in_ctx);
+	ctrl_ctx->add_flags |= SLOT_FLAG;
+	slot_ctx = xhci_get_slot_ctx(xhci, config_cmd->in_ctx);
+	slot_ctx->dev_info |= DEV_HUB;
+	if (tt->multi)
+		slot_ctx->dev_info |= DEV_MTT;
+	if (xhci->hci_version > 0x95) {
+		xhci_dbg(xhci, "xHCI version %x needs hub "
+				"TT think time and number of ports\n",
+				(unsigned int) xhci->hci_version);
+		slot_ctx->dev_info2 |= XHCI_MAX_PORTS(hdev->maxchild);
+		/* Set TT think time - convert from ns to FS bit times.
+		 * 0 = 8 FS bit times, 1 = 16 FS bit times,
+		 * 2 = 24 FS bit times, 3 = 32 FS bit times.
+		 */
+		think_time = tt->think_time;
+		if (think_time != 0)
+			think_time = (think_time / 666) - 1;
+		slot_ctx->tt_info |= TT_THINK_TIME(think_time);
+	} else {
+		xhci_dbg(xhci, "xHCI version %x doesn't need hub "
+				"TT think time or number of ports\n",
+				(unsigned int) xhci->hci_version);
+	}
+	slot_ctx->dev_state = 0;
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	xhci_dbg(xhci, "Set up %s for hub device.\n",
+			(xhci->hci_version > 0x95) ?
+			"configure endpoint" : "evaluate context");
+	xhci_dbg(xhci, "Slot %u Input Context:\n", hdev->slot_id);
+	xhci_dbg_ctx(xhci, config_cmd->in_ctx, 0);
+
+	/* Issue and wait for the configure endpoint or
+	 * evaluate context command.
+	 */
+	if (xhci->hci_version > 0x95)
+		ret = xhci_configure_endpoint(xhci, hdev, config_cmd,
+				false, false);
+	else
+		ret = xhci_configure_endpoint(xhci, hdev, config_cmd,
+				true, false);
+
+	xhci_dbg(xhci, "Slot %u Output Context:\n", hdev->slot_id);
+	xhci_dbg_ctx(xhci, vdev->out_ctx, 0);
+
+	xhci_free_command(xhci, config_cmd);
+	return ret;
+}
+
 int xhci_get_frame(struct usb_hcd *hcd)
 {
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index e6b9a1c6002d..1db4fea8c170 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -94,6 +94,9 @@ static void xhci_link_segments(struct xhci_hcd *xhci, struct xhci_segment *prev,
 		val = prev->trbs[TRBS_PER_SEGMENT-1].link.control;
 		val &= ~TRB_TYPE_BITMASK;
 		val |= TRB_TYPE(TRB_LINK);
+		/* Always set the chain bit with 0.95 hardware */
+		if (xhci_link_trb_quirk(xhci))
+			val |= TRB_CHAIN;
 		prev->trbs[TRBS_PER_SEGMENT-1].link.control = val;
 	}
 	xhci_dbg(xhci, "Linking segment 0x%llx to segment 0x%llx (DMA)\n",
@@ -141,7 +144,6 @@ static struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci,
 		return 0;
 
 	INIT_LIST_HEAD(&ring->td_list);
-	INIT_LIST_HEAD(&ring->cancelled_td_list);
 	if (num_segs == 0)
 		return ring;
 
@@ -262,8 +264,8 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
 		return;
 
 	for (i = 0; i < 31; ++i)
-		if (dev->ep_rings[i])
-			xhci_ring_free(xhci, dev->ep_rings[i]);
+		if (dev->eps[i].ring)
+			xhci_ring_free(xhci, dev->eps[i].ring);
 
 	if (dev->in_ctx)
 		xhci_free_container_ctx(xhci, dev->in_ctx);
@@ -278,6 +280,7 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
 		struct usb_device *udev, gfp_t flags)
 {
 	struct xhci_virt_device *dev;
+	int i;
 
 	/* Slot ID 0 is reserved */
 	if (slot_id == 0 || xhci->devs[slot_id]) {
@@ -306,12 +309,17 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
 	xhci_dbg(xhci, "Slot %d input ctx = 0x%llx (dma)\n", slot_id,
 			(unsigned long long)dev->in_ctx->dma);
 
+	/* Initialize the cancellation list for each endpoint */
+	for (i = 0; i < 31; i++)
+		INIT_LIST_HEAD(&dev->eps[i].cancelled_td_list);
+
 	/* Allocate endpoint 0 ring */
-	dev->ep_rings[0] = xhci_ring_alloc(xhci, 1, true, flags);
-	if (!dev->ep_rings[0])
+	dev->eps[0].ring = xhci_ring_alloc(xhci, 1, true, flags);
+	if (!dev->eps[0].ring)
 		goto fail;
 
 	init_completion(&dev->cmd_completion);
+	INIT_LIST_HEAD(&dev->cmd_list);
 
 	/* Point to output device context in dcbaa. */
 	xhci->dcbaa->dev_context_ptrs[slot_id] = dev->out_ctx->dma;
@@ -352,9 +360,9 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	/* 3) Only the control endpoint is valid - one endpoint context */
 	slot_ctx->dev_info |= LAST_CTX(1);
 
+	slot_ctx->dev_info |= (u32) udev->route;
 	switch (udev->speed) {
 	case USB_SPEED_SUPER:
-		slot_ctx->dev_info |= (u32) udev->route;
 		slot_ctx->dev_info |= (u32) SLOT_SPEED_SS;
 		break;
 	case USB_SPEED_HIGH:
@@ -382,14 +390,12 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	xhci_dbg(xhci, "Set root hub portnum to %d\n", top_dev->portnum);
 
 	/* Is this a LS/FS device under a HS hub? */
-	/*
-	 * FIXME: I don't think this is right, where does the TT info for the
-	 * roothub or parent hub come from?
-	 */
 	if ((udev->speed == USB_SPEED_LOW || udev->speed == USB_SPEED_FULL) &&
 			udev->tt) {
 		slot_ctx->tt_info = udev->tt->hub->slot_id;
 		slot_ctx->tt_info |= udev->ttport << 8;
+		if (udev->tt->multi)
+			slot_ctx->dev_info |= DEV_MTT;
 	}
 	xhci_dbg(xhci, "udev->tt = %p\n", udev->tt);
 	xhci_dbg(xhci, "udev->ttport = 0x%x\n", udev->ttport);
@@ -398,22 +404,35 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	/* Step 5 */
 	ep0_ctx->ep_info2 = EP_TYPE(CTRL_EP);
 	/*
-	 * See section 4.3 bullet 6:
-	 * The default Max Packet size for ep0 is "8 bytes for a USB2
-	 * LS/FS/HS device or 512 bytes for a USB3 SS device"
 	 * XXX: Not sure about wireless USB devices.
 	 */
-	if (udev->speed == USB_SPEED_SUPER)
+	switch (udev->speed) {
+	case USB_SPEED_SUPER:
 		ep0_ctx->ep_info2 |= MAX_PACKET(512);
-	else
+		break;
+	case USB_SPEED_HIGH:
+	/* USB core guesses at a 64-byte max packet first for FS devices */
+	case USB_SPEED_FULL:
+		ep0_ctx->ep_info2 |= MAX_PACKET(64);
+		break;
+	case USB_SPEED_LOW:
 		ep0_ctx->ep_info2 |= MAX_PACKET(8);
+		break;
+	case USB_SPEED_VARIABLE:
+		xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n");
+		return -EINVAL;
+		break;
+	default:
+		/* New speed? */
+		BUG();
+	}
 	/* EP 0 can handle "burst" sizes of 1, so Max Burst Size field is 0 */
 	ep0_ctx->ep_info2 |= MAX_BURST(0);
 	ep0_ctx->ep_info2 |= ERROR_COUNT(3);
 
 	ep0_ctx->deq =
-		dev->ep_rings[0]->first_seg->dma;
-	ep0_ctx->deq |= dev->ep_rings[0]->cycle_state;
+		dev->eps[0].ring->first_seg->dma;
+	ep0_ctx->deq |= dev->eps[0].ring->cycle_state;
 
 	/* Steps 7 and 8 were done in xhci_alloc_virt_device() */
 
@@ -523,10 +542,11 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 	ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
 
 	/* Set up the endpoint ring */
-	virt_dev->new_ep_rings[ep_index] = xhci_ring_alloc(xhci, 1, true, mem_flags);
-	if (!virt_dev->new_ep_rings[ep_index])
+	virt_dev->eps[ep_index].new_ring =
+		xhci_ring_alloc(xhci, 1, true, mem_flags);
+	if (!virt_dev->eps[ep_index].new_ring)
 		return -ENOMEM;
-	ep_ring = virt_dev->new_ep_rings[ep_index];
+	ep_ring = virt_dev->eps[ep_index].new_ring;
 	ep_ctx->deq = ep_ring->first_seg->dma | ep_ring->cycle_state;
 
 	ep_ctx->ep_info = xhci_get_endpoint_interval(udev, ep);
@@ -598,6 +618,48 @@ void xhci_endpoint_zero(struct xhci_hcd *xhci,
 	 */
 }
 
+/* Copy output xhci_ep_ctx to the input xhci_ep_ctx copy.
+ * Useful when you want to change one particular aspect of the endpoint and then
+ * issue a configure endpoint command.
+ */
+void xhci_endpoint_copy(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *in_ctx,
+		struct xhci_container_ctx *out_ctx,
+		unsigned int ep_index)
+{
+	struct xhci_ep_ctx *out_ep_ctx;
+	struct xhci_ep_ctx *in_ep_ctx;
+
+	out_ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
+	in_ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
+
+	in_ep_ctx->ep_info = out_ep_ctx->ep_info;
+	in_ep_ctx->ep_info2 = out_ep_ctx->ep_info2;
+	in_ep_ctx->deq = out_ep_ctx->deq;
+	in_ep_ctx->tx_info = out_ep_ctx->tx_info;
+}
+
+/* Copy output xhci_slot_ctx to the input xhci_slot_ctx.
+ * Useful when you want to change one particular aspect of the endpoint and then
+ * issue a configure endpoint command.  Only the context entries field matters,
+ * but we'll copy the whole thing anyway.
+ */
+void xhci_slot_copy(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *in_ctx,
+		struct xhci_container_ctx *out_ctx)
+{
+	struct xhci_slot_ctx *in_slot_ctx;
+	struct xhci_slot_ctx *out_slot_ctx;
+
+	in_slot_ctx = xhci_get_slot_ctx(xhci, in_ctx);
+	out_slot_ctx = xhci_get_slot_ctx(xhci, out_ctx);
+
+	in_slot_ctx->dev_info = out_slot_ctx->dev_info;
+	in_slot_ctx->dev_info2 = out_slot_ctx->dev_info2;
+	in_slot_ctx->tt_info = out_slot_ctx->tt_info;
+	in_slot_ctx->dev_state = out_slot_ctx->dev_state;
+}
+
 /* Set up the scratchpad buffer array and scratchpad buffers, if needed. */
 static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags)
 {
@@ -695,6 +757,44 @@ static void scratchpad_free(struct xhci_hcd *xhci)
 	xhci->scratchpad = NULL;
 }
 
+struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci,
+		bool allocate_completion, gfp_t mem_flags)
+{
+	struct xhci_command *command;
+
+	command = kzalloc(sizeof(*command), mem_flags);
+	if (!command)
+		return NULL;
+
+	command->in_ctx =
+		xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_INPUT, mem_flags);
+	if (!command->in_ctx)
+		return NULL;
+
+	if (allocate_completion) {
+		command->completion =
+			kzalloc(sizeof(struct completion), mem_flags);
+		if (!command->completion) {
+			xhci_free_container_ctx(xhci, command->in_ctx);
+			return NULL;
+		}
+		init_completion(command->completion);
+	}
+
+	command->status = 0;
+	INIT_LIST_HEAD(&command->cmd_list);
+	return command;
+}
+
+void xhci_free_command(struct xhci_hcd *xhci,
+		struct xhci_command *command)
+{
+	xhci_free_container_ctx(xhci,
+			command->in_ctx);
+	kfree(command->completion);
+	kfree(command);
+}
+
 void xhci_mem_cleanup(struct xhci_hcd *xhci)
 {
 	struct pci_dev	*pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 592fe7e623f7..06595ec27bb7 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -24,6 +24,10 @@
 
 #include "xhci.h"
 
+/* Device for a quirk */
+#define PCI_VENDOR_ID_FRESCO_LOGIC	0x1b73
+#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK	0x1000
+
 static const char hcd_name[] = "xhci_hcd";
 
 /* called after powerup, by probe or system-pm "wakeup" */
@@ -59,9 +63,20 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
 	xhci->hcs_params1 = xhci_readl(xhci, &xhci->cap_regs->hcs_params1);
 	xhci->hcs_params2 = xhci_readl(xhci, &xhci->cap_regs->hcs_params2);
 	xhci->hcs_params3 = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
+	xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
+	xhci->hci_version = HC_VERSION(xhci->hcc_params);
 	xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
 	xhci_print_registers(xhci);
 
+	/* Look for vendor-specific quirks */
+	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
+			pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
+			pdev->revision == 0x0) {
+			xhci->quirks |= XHCI_RESET_EP_QUIRK;
+			xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
+					" endpoint cmd after reset endpoint\n");
+	}
+
 	/* Make sure the HC is halted. */
 	retval = xhci_halt(xhci);
 	if (retval)
@@ -121,6 +136,7 @@ static const struct hc_driver xhci_pci_hc_driver = {
 	.check_bandwidth =	xhci_check_bandwidth,
 	.reset_bandwidth =	xhci_reset_bandwidth,
 	.address_device =	xhci_address_device,
+	.update_hub_device =	xhci_update_hub_device,
 
 	/*
 	 * scheduling support
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index aa88a067148b..173c39c76489 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -172,8 +172,9 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
  * have their chain bit cleared (so that each Link TRB is a separate TD).
  *
  * Section 6.4.4.1 of the 0.95 spec says link TRBs cannot have the chain bit
- * set, but other sections talk about dealing with the chain bit set.
- * Assume section 6.4.4.1 is wrong, and the chain bit can be set in a Link TRB.
+ * set, but other sections talk about dealing with the chain bit set.  This was
+ * fixed in the 0.96 specification errata, but we have to assume that all 0.95
+ * xHCI hardware can't handle the chain bit being cleared on a link TRB.
  */
 static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer)
 {
@@ -191,8 +192,14 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
 	while (last_trb(xhci, ring, ring->enq_seg, next)) {
 		if (!consumer) {
 			if (ring != xhci->event_ring) {
-				next->link.control &= ~TRB_CHAIN;
-				next->link.control |= chain;
+				/* If we're not dealing with 0.95 hardware,
+				 * carry over the chain bit of the previous TRB
+				 * (which may mean the chain bit is cleared).
+				 */
+				if (!xhci_link_trb_quirk(xhci)) {
+					next->link.control &= ~TRB_CHAIN;
+					next->link.control |= chain;
+				}
 				/* Give this link TRB to the hardware */
 				wmb();
 				if (next->link.control & TRB_CYCLE)
@@ -289,16 +296,18 @@ static void ring_ep_doorbell(struct xhci_hcd *xhci,
 		unsigned int slot_id,
 		unsigned int ep_index)
 {
-	struct xhci_ring *ep_ring;
+	struct xhci_virt_ep *ep;
+	unsigned int ep_state;
 	u32 field;
 	__u32 __iomem *db_addr = &xhci->dba->doorbell[slot_id];
 
-	ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+	ep = &xhci->devs[slot_id]->eps[ep_index];
+	ep_state = ep->ep_state;
 	/* Don't ring the doorbell for this endpoint if there are pending
 	 * cancellations because the we don't want to interrupt processing.
 	 */
-	if (!ep_ring->cancels_pending && !(ep_ring->state & SET_DEQ_PENDING)
-			&& !(ep_ring->state & EP_HALTED)) {
+	if (!ep->cancels_pending && !(ep_state & SET_DEQ_PENDING)
+			&& !(ep_state & EP_HALTED)) {
 		field = xhci_readl(xhci, db_addr) & DB_MASK;
 		xhci_writel(xhci, field | EPI_TO_DB(ep_index), db_addr);
 		/* Flush PCI posted writes - FIXME Matthew Wilcox says this
@@ -354,7 +363,7 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 		struct xhci_td *cur_td, struct xhci_dequeue_state *state)
 {
 	struct xhci_virt_device *dev = xhci->devs[slot_id];
-	struct xhci_ring *ep_ring = dev->ep_rings[ep_index];
+	struct xhci_ring *ep_ring = dev->eps[ep_index].ring;
 	struct xhci_generic_trb *trb;
 	struct xhci_ep_ctx *ep_ctx;
 	dma_addr_t addr;
@@ -362,7 +371,7 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 	state->new_cycle_state = 0;
 	xhci_dbg(xhci, "Finding segment containing stopped TRB.\n");
 	state->new_deq_seg = find_trb_seg(cur_td->start_seg,
-			ep_ring->stopped_trb,
+			dev->eps[ep_index].stopped_trb,
 			&state->new_cycle_state);
 	if (!state->new_deq_seg)
 		BUG();
@@ -442,9 +451,11 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
 		union xhci_trb *deq_ptr, u32 cycle_state);
 
 void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
-		struct xhci_ring *ep_ring, unsigned int slot_id,
-		unsigned int ep_index, struct xhci_dequeue_state *deq_state)
+		unsigned int slot_id, unsigned int ep_index,
+		struct xhci_dequeue_state *deq_state)
 {
+	struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
+
 	xhci_dbg(xhci, "Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), "
 			"new deq ptr = %p (0x%llx dma), new cycle = %u\n",
 			deq_state->new_deq_seg,
@@ -461,8 +472,7 @@ void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
 	 * if the ring is running, and ringing the doorbell starts the
 	 * ring running.
 	 */
-	ep_ring->state |= SET_DEQ_PENDING;
-	xhci_ring_cmd_db(xhci);
+	ep->ep_state |= SET_DEQ_PENDING;
 }
 
 /*
@@ -481,6 +491,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
 	unsigned int slot_id;
 	unsigned int ep_index;
 	struct xhci_ring *ep_ring;
+	struct xhci_virt_ep *ep;
 	struct list_head *entry;
 	struct xhci_td *cur_td = 0;
 	struct xhci_td *last_unlinked_td;
@@ -493,9 +504,10 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
 	memset(&deq_state, 0, sizeof(deq_state));
 	slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
 	ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
-	ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+	ep = &xhci->devs[slot_id]->eps[ep_index];
+	ep_ring = ep->ring;
 
-	if (list_empty(&ep_ring->cancelled_td_list))
+	if (list_empty(&ep->cancelled_td_list))
 		return;
 
 	/* Fix up the ep ring first, so HW stops executing cancelled TDs.
@@ -503,7 +515,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
 	 * it.  We're also in the event handler, so we can't get re-interrupted
 	 * if another Stop Endpoint command completes
 	 */
-	list_for_each(entry, &ep_ring->cancelled_td_list) {
+	list_for_each(entry, &ep->cancelled_td_list) {
 		cur_td = list_entry(entry, struct xhci_td, cancelled_td_list);
 		xhci_dbg(xhci, "Cancelling TD starting at %p, 0x%llx (dma).\n",
 				cur_td->first_trb,
@@ -512,7 +524,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
 		 * If we stopped on the TD we need to cancel, then we have to
 		 * move the xHC endpoint ring dequeue pointer past this TD.
 		 */
-		if (cur_td == ep_ring->stopped_td)
+		if (cur_td == ep->stopped_td)
 			xhci_find_new_dequeue_state(xhci, slot_id, ep_index, cur_td,
 					&deq_state);
 		else
@@ -523,14 +535,15 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
 		 * the cancelled TD list for URB completion later.
 		 */
 		list_del(&cur_td->td_list);
-		ep_ring->cancels_pending--;
+		ep->cancels_pending--;
 	}
 	last_unlinked_td = cur_td;
 
 	/* If necessary, queue a Set Transfer Ring Dequeue Pointer command */
 	if (deq_state.new_deq_ptr && deq_state.new_deq_seg) {
-		xhci_queue_new_dequeue_state(xhci, ep_ring,
+		xhci_queue_new_dequeue_state(xhci,
 				slot_id, ep_index, &deq_state);
+		xhci_ring_cmd_db(xhci);
 	} else {
 		/* Otherwise just ring the doorbell to restart the ring */
 		ring_ep_doorbell(xhci, slot_id, ep_index);
@@ -543,7 +556,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
 	 * So stop when we've completed the URB for the last TD we unlinked.
 	 */
 	do {
-		cur_td = list_entry(ep_ring->cancelled_td_list.next,
+		cur_td = list_entry(ep->cancelled_td_list.next,
 				struct xhci_td, cancelled_td_list);
 		list_del(&cur_td->cancelled_td_list);
 
@@ -590,7 +603,7 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci,
 	slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
 	ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
 	dev = xhci->devs[slot_id];
-	ep_ring = dev->ep_rings[ep_index];
+	ep_ring = dev->eps[ep_index].ring;
 	ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
 	slot_ctx = xhci_get_slot_ctx(xhci, dev->out_ctx);
 
@@ -634,7 +647,7 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci,
 				ep_ctx->deq);
 	}
 
-	ep_ring->state &= ~SET_DEQ_PENDING;
+	dev->eps[ep_index].ep_state &= ~SET_DEQ_PENDING;
 	ring_ep_doorbell(xhci, slot_id, ep_index);
 }
 
@@ -644,18 +657,60 @@ static void handle_reset_ep_completion(struct xhci_hcd *xhci,
 {
 	int slot_id;
 	unsigned int ep_index;
+	struct xhci_ring *ep_ring;
 
 	slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
 	ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
+	ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
 	/* This command will only fail if the endpoint wasn't halted,
 	 * but we don't care.
 	 */
 	xhci_dbg(xhci, "Ignoring reset ep completion code of %u\n",
 			(unsigned int) GET_COMP_CODE(event->status));
 
-	/* Clear our internal halted state and restart the ring */
-	xhci->devs[slot_id]->ep_rings[ep_index]->state &= ~EP_HALTED;
-	ring_ep_doorbell(xhci, slot_id, ep_index);
+	/* HW with the reset endpoint quirk needs to have a configure endpoint
+	 * command complete before the endpoint can be used.  Queue that here
+	 * because the HW can't handle two commands being queued in a row.
+	 */
+	if (xhci->quirks & XHCI_RESET_EP_QUIRK) {
+		xhci_dbg(xhci, "Queueing configure endpoint command\n");
+		xhci_queue_configure_endpoint(xhci,
+				xhci->devs[slot_id]->in_ctx->dma, slot_id,
+				false);
+		xhci_ring_cmd_db(xhci);
+	} else {
+		/* Clear our internal halted state and restart the ring */
+		xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_HALTED;
+		ring_ep_doorbell(xhci, slot_id, ep_index);
+	}
+}
+
+/* Check to see if a command in the device's command queue matches this one.
+ * Signal the completion or free the command, and return 1.  Return 0 if the
+ * completed command isn't at the head of the command list.
+ */
+static int handle_cmd_in_cmd_wait_list(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		struct xhci_event_cmd *event)
+{
+	struct xhci_command *command;
+
+	if (list_empty(&virt_dev->cmd_list))
+		return 0;
+
+	command = list_entry(virt_dev->cmd_list.next,
+			struct xhci_command, cmd_list);
+	if (xhci->cmd_ring->dequeue != command->command_trb)
+		return 0;
+
+	command->status =
+		GET_COMP_CODE(event->status);
+	list_del(&command->cmd_list);
+	if (command->completion)
+		complete(command->completion);
+	else
+		xhci_free_command(xhci, command);
+	return 1;
 }
 
 static void handle_cmd_completion(struct xhci_hcd *xhci,
@@ -664,6 +719,11 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
 	int slot_id = TRB_TO_SLOT_ID(event->flags);
 	u64 cmd_dma;
 	dma_addr_t cmd_dequeue_dma;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_virt_device *virt_dev;
+	unsigned int ep_index;
+	struct xhci_ring *ep_ring;
+	unsigned int ep_state;
 
 	cmd_dma = event->cmd_trb;
 	cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
@@ -691,6 +751,47 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
 			xhci_free_virt_device(xhci, slot_id);
 		break;
 	case TRB_TYPE(TRB_CONFIG_EP):
+		virt_dev = xhci->devs[slot_id];
+		if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event))
+			break;
+		/*
+		 * Configure endpoint commands can come from the USB core
+		 * configuration or alt setting changes, or because the HW
+		 * needed an extra configure endpoint command after a reset
+		 * endpoint command.  In the latter case, the xHCI driver is
+		 * not waiting on the configure endpoint command.
+		 */
+		ctrl_ctx = xhci_get_input_control_ctx(xhci,
+				virt_dev->in_ctx);
+		/* Input ctx add_flags are the endpoint index plus one */
+		ep_index = xhci_last_valid_endpoint(ctrl_ctx->add_flags) - 1;
+		ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
+		if (!ep_ring) {
+			/* This must have been an initial configure endpoint */
+			xhci->devs[slot_id]->cmd_status =
+				GET_COMP_CODE(event->status);
+			complete(&xhci->devs[slot_id]->cmd_completion);
+			break;
+		}
+		ep_state = xhci->devs[slot_id]->eps[ep_index].ep_state;
+		xhci_dbg(xhci, "Completed config ep cmd - last ep index = %d, "
+				"state = %d\n", ep_index, ep_state);
+		if (xhci->quirks & XHCI_RESET_EP_QUIRK &&
+				ep_state & EP_HALTED) {
+			/* Clear our internal halted state and restart ring */
+			xhci->devs[slot_id]->eps[ep_index].ep_state &=
+				~EP_HALTED;
+			ring_ep_doorbell(xhci, slot_id, ep_index);
+		} else {
+			xhci->devs[slot_id]->cmd_status =
+				GET_COMP_CODE(event->status);
+			complete(&xhci->devs[slot_id]->cmd_completion);
+		}
+		break;
+	case TRB_TYPE(TRB_EVAL_CONTEXT):
+		virt_dev = xhci->devs[slot_id];
+		if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event))
+			break;
 		xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(event->status);
 		complete(&xhci->devs[slot_id]->cmd_completion);
 		break;
@@ -805,7 +906,9 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 		struct xhci_transfer_event *event)
 {
 	struct xhci_virt_device *xdev;
+	struct xhci_virt_ep *ep;
 	struct xhci_ring *ep_ring;
+	unsigned int slot_id;
 	int ep_index;
 	struct xhci_td *td = 0;
 	dma_addr_t event_dma;
@@ -814,9 +917,11 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 	struct urb *urb = 0;
 	int status = -EINPROGRESS;
 	struct xhci_ep_ctx *ep_ctx;
+	u32 trb_comp_code;
 
 	xhci_dbg(xhci, "In %s\n", __func__);
-	xdev = xhci->devs[TRB_TO_SLOT_ID(event->flags)];
+	slot_id = TRB_TO_SLOT_ID(event->flags);
+	xdev = xhci->devs[slot_id];
 	if (!xdev) {
 		xhci_err(xhci, "ERROR Transfer event pointed to bad slot\n");
 		return -ENODEV;
@@ -825,7 +930,8 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 	/* Endpoint ID is 1 based, our index is zero based */
 	ep_index = TRB_TO_EP_ID(event->flags) - 1;
 	xhci_dbg(xhci, "%s - ep index = %d\n", __func__, ep_index);
-	ep_ring = xdev->ep_rings[ep_index];
+	ep = &xdev->eps[ep_index];
+	ep_ring = ep->ring;
 	ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
 	if (!ep_ring || (ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) {
 		xhci_err(xhci, "ERROR Transfer event pointed to disabled endpoint\n");
@@ -870,7 +976,8 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 			(unsigned int) event->flags);
 
 	/* Look for common error cases */
-	switch (GET_COMP_CODE(event->transfer_len)) {
+	trb_comp_code = GET_COMP_CODE(event->transfer_len);
+	switch (trb_comp_code) {
 	/* Skip codes that require special handling depending on
 	 * transfer type
 	 */
@@ -885,7 +992,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 		break;
 	case COMP_STALL:
 		xhci_warn(xhci, "WARN: Stalled endpoint\n");
-		ep_ring->state |= EP_HALTED;
+		ep->ep_state |= EP_HALTED;
 		status = -EPIPE;
 		break;
 	case COMP_TRB_ERR:
@@ -913,7 +1020,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 	/* Was this a control transfer? */
 	if (usb_endpoint_xfer_control(&td->urb->ep->desc)) {
 		xhci_debug_trb(xhci, xhci->event_ring->dequeue);
-		switch (GET_COMP_CODE(event->transfer_len)) {
+		switch (trb_comp_code) {
 		case COMP_SUCCESS:
 			if (event_trb == ep_ring->dequeue) {
 				xhci_warn(xhci, "WARN: Success on ctrl setup TRB without IOC set??\n");
@@ -928,8 +1035,37 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 			break;
 		case COMP_SHORT_TX:
 			xhci_warn(xhci, "WARN: short transfer on control ep\n");
-			status = -EREMOTEIO;
+			if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+				status = -EREMOTEIO;
+			else
+				status = 0;
 			break;
+		case COMP_BABBLE:
+			/* The 0.96 spec says a babbling control endpoint
+			 * is not halted. The 0.96 spec says it is.  Some HW
+			 * claims to be 0.95 compliant, but it halts the control
+			 * endpoint anyway.  Check if a babble halted the
+			 * endpoint.
+			 */
+			if (ep_ctx->ep_info != EP_STATE_HALTED)
+				break;
+			/* else fall through */
+		case COMP_STALL:
+			/* Did we transfer part of the data (middle) phase? */
+			if (event_trb != ep_ring->dequeue &&
+					event_trb != td->last_trb)
+				td->urb->actual_length =
+					td->urb->transfer_buffer_length
+					- TRB_LEN(event->transfer_len);
+			else
+				td->urb->actual_length = 0;
+
+			ep->stopped_td = td;
+			ep->stopped_trb = event_trb;
+			xhci_queue_reset_ep(xhci, slot_id, ep_index);
+			xhci_cleanup_stalled_ring(xhci, td->urb->dev, ep_index);
+			xhci_ring_cmd_db(xhci);
+			goto td_cleanup;
 		default:
 			/* Others already handled above */
 			break;
@@ -943,7 +1079,10 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 			if (event_trb == td->last_trb) {
 				if (td->urb->actual_length != 0) {
 					/* Don't overwrite a previously set error code */
-					if (status == -EINPROGRESS || status == 0)
+					if ((status == -EINPROGRESS ||
+								status == 0) &&
+							(td->urb->transfer_flags
+							 & URB_SHORT_NOT_OK))
 						/* Did we already see a short data stage? */
 						status = -EREMOTEIO;
 				} else {
@@ -952,7 +1091,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 				}
 			} else {
 			/* Maybe the event was for the data stage? */
-				if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL) {
+				if (trb_comp_code != COMP_STOP_INVAL) {
 					/* We didn't stop on a link TRB in the middle */
 					td->urb->actual_length =
 						td->urb->transfer_buffer_length -
@@ -964,7 +1103,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 			}
 		}
 	} else {
-		switch (GET_COMP_CODE(event->transfer_len)) {
+		switch (trb_comp_code) {
 		case COMP_SUCCESS:
 			/* Double check that the HW transferred everything. */
 			if (event_trb != td->last_trb) {
@@ -975,7 +1114,12 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 				else
 					status = 0;
 			} else {
-				xhci_dbg(xhci, "Successful bulk transfer!\n");
+				if (usb_endpoint_xfer_bulk(&td->urb->ep->desc))
+					xhci_dbg(xhci, "Successful bulk "
+							"transfer!\n");
+				else
+					xhci_dbg(xhci, "Successful interrupt "
+							"transfer!\n");
 				status = 0;
 			}
 			break;
@@ -1001,11 +1145,17 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 				td->urb->actual_length =
 					td->urb->transfer_buffer_length -
 					TRB_LEN(event->transfer_len);
-				if (td->urb->actual_length < 0) {
+				if (td->urb->transfer_buffer_length <
+						td->urb->actual_length) {
 					xhci_warn(xhci, "HC gave bad length "
 							"of %d bytes left\n",
 							TRB_LEN(event->transfer_len));
 					td->urb->actual_length = 0;
+					if (td->urb->transfer_flags &
+							URB_SHORT_NOT_OK)
+						status = -EREMOTEIO;
+					else
+						status = 0;
 				}
 				/* Don't overwrite a previously set error code */
 				if (status == -EINPROGRESS) {
@@ -1041,30 +1191,31 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 			/* If the ring didn't stop on a Link or No-op TRB, add
 			 * in the actual bytes transferred from the Normal TRB
 			 */
-			if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL)
+			if (trb_comp_code != COMP_STOP_INVAL)
 				td->urb->actual_length +=
 					TRB_LEN(cur_trb->generic.field[2]) -
 					TRB_LEN(event->transfer_len);
 		}
 	}
-	if (GET_COMP_CODE(event->transfer_len) == COMP_STOP_INVAL ||
-			GET_COMP_CODE(event->transfer_len) == COMP_STOP) {
+	if (trb_comp_code == COMP_STOP_INVAL ||
+			trb_comp_code == COMP_STOP) {
 		/* The Endpoint Stop Command completion will take care of any
 		 * stopped TDs.  A stopped TD may be restarted, so don't update
 		 * the ring dequeue pointer or take this TD off any lists yet.
 		 */
-		ep_ring->stopped_td = td;
-		ep_ring->stopped_trb = event_trb;
+		ep->stopped_td = td;
+		ep->stopped_trb = event_trb;
 	} else {
-		if (GET_COMP_CODE(event->transfer_len) == COMP_STALL) {
+		if (trb_comp_code == COMP_STALL ||
+				trb_comp_code == COMP_BABBLE) {
 			/* The transfer is completed from the driver's
 			 * perspective, but we need to issue a set dequeue
 			 * command for this stalled endpoint to move the dequeue
 			 * pointer past the TD.  We can't do that here because
 			 * the halt condition must be cleared first.
 			 */
-			ep_ring->stopped_td = td;
-			ep_ring->stopped_trb = event_trb;
+			ep->stopped_td = td;
+			ep->stopped_trb = event_trb;
 		} else {
 			/* Update ring dequeue pointer */
 			while (ep_ring->dequeue != td->last_trb)
@@ -1072,16 +1223,41 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 			inc_deq(xhci, ep_ring, false);
 		}
 
+td_cleanup:
 		/* Clean up the endpoint's TD list */
 		urb = td->urb;
+		/* Do one last check of the actual transfer length.
+		 * If the host controller said we transferred more data than
+		 * the buffer length, urb->actual_length will be a very big
+		 * number (since it's unsigned).  Play it safe and say we didn't
+		 * transfer anything.
+		 */
+		if (urb->actual_length > urb->transfer_buffer_length) {
+			xhci_warn(xhci, "URB transfer length is wrong, "
+					"xHC issue? req. len = %u, "
+					"act. len = %u\n",
+					urb->transfer_buffer_length,
+					urb->actual_length);
+			urb->actual_length = 0;
+			if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+				status = -EREMOTEIO;
+			else
+				status = 0;
+		}
 		list_del(&td->td_list);
 		/* Was this TD slated to be cancelled but completed anyway? */
 		if (!list_empty(&td->cancelled_td_list)) {
 			list_del(&td->cancelled_td_list);
-			ep_ring->cancels_pending--;
+			ep->cancels_pending--;
 		}
-		/* Leave the TD around for the reset endpoint function to use */
-		if (GET_COMP_CODE(event->transfer_len) != COMP_STALL) {
+		/* Leave the TD around for the reset endpoint function to use
+		 * (but only if it's not a control endpoint, since we already
+		 * queued the Set TR dequeue pointer command for stalled
+		 * control endpoints).
+		 */
+		if (usb_endpoint_xfer_control(&urb->ep->desc) ||
+			(trb_comp_code != COMP_STALL &&
+				trb_comp_code != COMP_BABBLE)) {
 			kfree(td);
 		}
 		urb->hcpriv = NULL;
@@ -1094,7 +1270,7 @@ cleanup:
 	if (urb) {
 		usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb);
 		xhci_dbg(xhci, "Giveback URB %p, len = %d, status = %d\n",
-				urb, td->urb->actual_length, status);
+				urb, urb->actual_length, status);
 		spin_unlock(&xhci->lock);
 		usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status);
 		spin_lock(&xhci->lock);
@@ -1235,7 +1411,7 @@ static int prepare_transfer(struct xhci_hcd *xhci,
 {
 	int ret;
 	struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
-	ret = prepare_ring(xhci, xdev->ep_rings[ep_index],
+	ret = prepare_ring(xhci, xdev->eps[ep_index].ring,
 			ep_ctx->ep_info & EP_STATE_MASK,
 			num_trbs, mem_flags);
 	if (ret)
@@ -1255,9 +1431,9 @@ static int prepare_transfer(struct xhci_hcd *xhci,
 	(*td)->urb = urb;
 	urb->hcpriv = (void *) (*td);
 	/* Add this TD to the tail of the endpoint ring's TD list */
-	list_add_tail(&(*td)->td_list, &xdev->ep_rings[ep_index]->td_list);
-	(*td)->start_seg = xdev->ep_rings[ep_index]->enq_seg;
-	(*td)->first_trb = xdev->ep_rings[ep_index]->enqueue;
+	list_add_tail(&(*td)->td_list, &xdev->eps[ep_index].ring->td_list);
+	(*td)->start_seg = xdev->eps[ep_index].ring->enq_seg;
+	(*td)->first_trb = xdev->eps[ep_index].ring->enqueue;
 
 	return 0;
 }
@@ -1335,6 +1511,47 @@ static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id,
 	ring_ep_doorbell(xhci, slot_id, ep_index);
 }
 
+/*
+ * xHCI uses normal TRBs for both bulk and interrupt.  When the interrupt
+ * endpoint is to be serviced, the xHC will consume (at most) one TD.  A TD
+ * (comprised of sg list entries) can take several service intervals to
+ * transmit.
+ */
+int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+		struct urb *urb, int slot_id, unsigned int ep_index)
+{
+	struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci,
+			xhci->devs[slot_id]->out_ctx, ep_index);
+	int xhci_interval;
+	int ep_interval;
+
+	xhci_interval = EP_INTERVAL_TO_UFRAMES(ep_ctx->ep_info);
+	ep_interval = urb->interval;
+	/* Convert to microframes */
+	if (urb->dev->speed == USB_SPEED_LOW ||
+			urb->dev->speed == USB_SPEED_FULL)
+		ep_interval *= 8;
+	/* FIXME change this to a warning and a suggestion to use the new API
+	 * to set the polling interval (once the API is added).
+	 */
+	if (xhci_interval != ep_interval) {
+		if (!printk_ratelimit())
+			dev_dbg(&urb->dev->dev, "Driver uses different interval"
+					" (%d microframe%s) than xHCI "
+					"(%d microframe%s)\n",
+					ep_interval,
+					ep_interval == 1 ? "" : "s",
+					xhci_interval,
+					xhci_interval == 1 ? "" : "s");
+		urb->interval = xhci_interval;
+		/* Convert back to frames for LS/FS devices */
+		if (urb->dev->speed == USB_SPEED_LOW ||
+				urb->dev->speed == USB_SPEED_FULL)
+			urb->interval /= 8;
+	}
+	return xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index);
+}
+
 static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		struct urb *urb, int slot_id, unsigned int ep_index)
 {
@@ -1350,7 +1567,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	struct xhci_generic_trb *start_trb;
 	int start_cycle;
 
-	ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+	ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
 	num_trbs = count_sg_trbs_needed(xhci, urb);
 	num_sgs = urb->num_sgs;
 
@@ -1483,7 +1700,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	if (urb->sg)
 		return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index);
 
-	ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+	ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
 
 	num_trbs = 0;
 	/* How much data is (potentially) left before the 64KB boundary? */
@@ -1594,7 +1811,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	u32 field, length_field;
 	struct xhci_td *td;
 
-	ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+	ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
 
 	/*
 	 * Need to copy setup packet into setup TRB, so we can't use the setup
@@ -1677,12 +1894,27 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 
 /****		Command Ring Operations		****/
 
-/* Generic function for queueing a command TRB on the command ring */
-static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, u32 field3, u32 field4)
+/* Generic function for queueing a command TRB on the command ring.
+ * Check to make sure there's room on the command ring for one command TRB.
+ * Also check that there's room reserved for commands that must not fail.
+ * If this is a command that must not fail, meaning command_must_succeed = TRUE,
+ * then only check for the number of reserved spots.
+ * Don't decrement xhci->cmd_ring_reserved_trbs after we've queued the TRB
+ * because the command event handler may want to resubmit a failed command.
+ */
+static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2,
+		u32 field3, u32 field4, bool command_must_succeed)
 {
-	if (!room_on_ring(xhci, xhci->cmd_ring, 1)) {
+	int reserved_trbs = xhci->cmd_ring_reserved_trbs;
+	if (!command_must_succeed)
+		reserved_trbs++;
+
+	if (!room_on_ring(xhci, xhci->cmd_ring, reserved_trbs)) {
 		if (!in_interrupt())
 			xhci_err(xhci, "ERR: No room for command on command ring\n");
+		if (command_must_succeed)
+			xhci_err(xhci, "ERR: Reserved TRB counting for "
+					"unfailable commands failed.\n");
 		return -ENOMEM;
 	}
 	queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3,
@@ -1693,7 +1925,7 @@ static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, u32 fiel
 /* Queue a no-op command on the command ring */
 static int queue_cmd_noop(struct xhci_hcd *xhci)
 {
-	return queue_command(xhci, 0, 0, 0, TRB_TYPE(TRB_CMD_NOOP));
+	return queue_command(xhci, 0, 0, 0, TRB_TYPE(TRB_CMD_NOOP), false);
 }
 
 /*
@@ -1712,7 +1944,7 @@ void *xhci_setup_one_noop(struct xhci_hcd *xhci)
 int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id)
 {
 	return queue_command(xhci, 0, 0, 0,
-			TRB_TYPE(trb_type) | SLOT_ID_FOR_TRB(slot_id));
+			TRB_TYPE(trb_type) | SLOT_ID_FOR_TRB(slot_id), false);
 }
 
 /* Queue an address device command TRB */
@@ -1721,16 +1953,28 @@ int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 {
 	return queue_command(xhci, lower_32_bits(in_ctx_ptr),
 			upper_32_bits(in_ctx_ptr), 0,
-			TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id));
+			TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id),
+			false);
 }
 
 /* Queue a configure endpoint command TRB */
 int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
+		u32 slot_id, bool command_must_succeed)
+{
+	return queue_command(xhci, lower_32_bits(in_ctx_ptr),
+			upper_32_bits(in_ctx_ptr), 0,
+			TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id),
+			command_must_succeed);
+}
+
+/* Queue an evaluate context command TRB */
+int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 		u32 slot_id)
 {
 	return queue_command(xhci, lower_32_bits(in_ctx_ptr),
 			upper_32_bits(in_ctx_ptr), 0,
-			TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id));
+			TRB_TYPE(TRB_EVAL_CONTEXT) | SLOT_ID_FOR_TRB(slot_id),
+			false);
 }
 
 int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id,
@@ -1741,7 +1985,7 @@ int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id,
 	u32 type = TRB_TYPE(TRB_STOP_RING);
 
 	return queue_command(xhci, 0, 0, 0,
-			trb_slot_id | trb_ep_index | type);
+			trb_slot_id | trb_ep_index | type, false);
 }
 
 /* Set Transfer Ring Dequeue Pointer command.
@@ -1765,7 +2009,7 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
 	}
 	return queue_command(xhci, lower_32_bits(addr) | cycle_state,
 			upper_32_bits(addr), 0,
-			trb_slot_id | trb_ep_index | type);
+			trb_slot_id | trb_ep_index | type, false);
 }
 
 int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
@@ -1775,5 +2019,6 @@ int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
 	u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
 	u32 type = TRB_TYPE(TRB_RESET_EP);
 
-	return queue_command(xhci, 0, 0, 0, trb_slot_id | trb_ep_index | type);
+	return queue_command(xhci, 0, 0, 0, trb_slot_id | trb_ep_index | type,
+			false);
 }
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index d31d32206ba3..4b254b6fa245 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -509,6 +509,8 @@ struct xhci_slot_ctx {
 #define MAX_EXIT	(0xffff)
 /* Root hub port number that is needed to access the USB device */
 #define ROOT_HUB_PORT(p)	(((p) & 0xff) << 16)
+/* Maximum number of ports under a hub device */
+#define XHCI_MAX_PORTS(p)	(((p) & 0xff) << 24)
 
 /* tt_info bitmasks */
 /*
@@ -522,6 +524,7 @@ struct xhci_slot_ctx {
  * '0' if the device is not low or full speed.
  */
 #define TT_PORT		(0xff << 8)
+#define TT_THINK_TIME(p)	(((p) & 0x3) << 16)
 
 /* dev_state bitmasks */
 /* USB device address - assigned by the HC */
@@ -581,6 +584,7 @@ struct xhci_ep_ctx {
 /* bit 15 is Linear Stream Array */
 /* Interval - period between requests to an endpoint - 125u increments. */
 #define EP_INTERVAL(p)		((p & 0xff) << 16)
+#define EP_INTERVAL_TO_UFRAMES(p)		(1 << (((p) >> 16) & 0xff))
 
 /* ep_info2 bitmasks */
 /*
@@ -589,6 +593,7 @@ struct xhci_ep_ctx {
  */
 #define	FORCE_EVENT	(0x1)
 #define ERROR_COUNT(p)	(((p) & 0x3) << 1)
+#define CTX_TO_EP_TYPE(p)	(((p) >> 3) & 0x7)
 #define EP_TYPE(p)	((p) << 3)
 #define ISOC_OUT_EP	1
 #define BULK_OUT_EP	2
@@ -601,6 +606,8 @@ struct xhci_ep_ctx {
 /* bit 7 is Host Initiate Disable - for disabling stream selection */
 #define MAX_BURST(p)	(((p)&0xff) << 8)
 #define MAX_PACKET(p)	(((p)&0xffff) << 16)
+#define MAX_PACKET_MASK		(0xffff << 16)
+#define MAX_PACKET_DECODED(p)	(((p) >> 16) & 0xffff)
 
 
 /**
@@ -616,11 +623,44 @@ struct xhci_input_control_ctx {
 	u32	rsvd2[6];
 };
 
+/* Represents everything that is needed to issue a command on the command ring.
+ * It's useful to pre-allocate these for commands that cannot fail due to
+ * out-of-memory errors, like freeing streams.
+ */
+struct xhci_command {
+	/* Input context for changing device state */
+	struct xhci_container_ctx	*in_ctx;
+	u32				status;
+	/* If completion is null, no one is waiting on this command
+	 * and the structure can be freed after the command completes.
+	 */
+	struct completion		*completion;
+	union xhci_trb			*command_trb;
+	struct list_head		cmd_list;
+};
+
 /* drop context bitmasks */
 #define	DROP_EP(x)	(0x1 << x)
 /* add context bitmasks */
 #define	ADD_EP(x)	(0x1 << x)
 
+struct xhci_virt_ep {
+	struct xhci_ring		*ring;
+	/* Temporary storage in case the configure endpoint command fails and we
+	 * have to restore the device state to the previous state
+	 */
+	struct xhci_ring		*new_ring;
+	unsigned int			ep_state;
+#define SET_DEQ_PENDING		(1 << 0)
+#define EP_HALTED		(1 << 1)
+	/* ----  Related to URB cancellation ---- */
+	struct list_head	cancelled_td_list;
+	unsigned int		cancels_pending;
+	/* The TRB that was last reported in a stopped endpoint ring */
+	union xhci_trb		*stopped_trb;
+	struct xhci_td		*stopped_td;
+};
+
 struct xhci_virt_device {
 	/*
 	 * Commands to the hardware are passed an "input context" that
@@ -633,16 +673,11 @@ struct xhci_virt_device {
 	struct xhci_container_ctx       *out_ctx;
 	/* Used for addressing devices and configuration changes */
 	struct xhci_container_ctx       *in_ctx;
-
-	/* FIXME when stream support is added */
-	struct xhci_ring		*ep_rings[31];
-	/* Temporary storage in case the configure endpoint command fails and we
-	 * have to restore the device state to the previous state
-	 */
-	struct xhci_ring		*new_ep_rings[31];
+	struct xhci_virt_ep		eps[31];
 	struct completion		cmd_completion;
 	/* Status of the last command issued for this device */
 	u32				cmd_status;
+	struct list_head		cmd_list;
 };
 
 
@@ -905,6 +940,8 @@ union xhci_trb {
  * It must also be greater than 16.
  */
 #define TRBS_PER_SEGMENT	64
+/* Allow two commands + a link TRB, along with any reserved command TRBs */
+#define MAX_RSVD_CMD_TRBS	(TRBS_PER_SEGMENT - 3)
 #define SEGMENT_SIZE		(TRBS_PER_SEGMENT*16)
 /* TRB buffer pointers can't cross 64KB boundaries */
 #define TRB_MAX_BUFF_SHIFT		16
@@ -926,6 +963,12 @@ struct xhci_td {
 	union xhci_trb		*last_trb;
 };
 
+struct xhci_dequeue_state {
+	struct xhci_segment *new_deq_seg;
+	union xhci_trb *new_deq_ptr;
+	int new_cycle_state;
+};
+
 struct xhci_ring {
 	struct xhci_segment	*first_seg;
 	union  xhci_trb		*enqueue;
@@ -935,15 +978,6 @@ struct xhci_ring {
 	struct xhci_segment	*deq_seg;
 	unsigned int		deq_updates;
 	struct list_head	td_list;
-	/* ----  Related to URB cancellation ---- */
-	struct list_head	cancelled_td_list;
-	unsigned int		cancels_pending;
-	unsigned int		state;
-#define SET_DEQ_PENDING		(1 << 0)
-#define EP_HALTED		(1 << 1)
-	/* The TRB that was last reported in a stopped endpoint ring */
-	union xhci_trb		*stopped_trb;
-	struct xhci_td		*stopped_td;
 	/*
 	 * Write the cycle state into the TRB cycle field to give ownership of
 	 * the TRB to the host controller (if we are the producer), or to check
@@ -952,12 +986,6 @@ struct xhci_ring {
 	u32			cycle_state;
 };
 
-struct xhci_dequeue_state {
-	struct xhci_segment *new_deq_seg;
-	union xhci_trb *new_deq_ptr;
-	int new_cycle_state;
-};
-
 struct xhci_erst_entry {
 	/* 64-bit event ring segment address */
 	u64	seg_addr;
@@ -1034,6 +1062,7 @@ struct xhci_hcd {
 	/* data structures */
 	struct xhci_device_context_array *dcbaa;
 	struct xhci_ring	*cmd_ring;
+	unsigned int		cmd_ring_reserved_trbs;
 	struct xhci_ring	*event_ring;
 	struct xhci_erst	erst;
 	/* Scratchpad */
@@ -1058,6 +1087,9 @@ struct xhci_hcd {
 	int			noops_submitted;
 	int			noops_handled;
 	int			error_bitmask;
+	unsigned int		quirks;
+#define	XHCI_LINK_TRB_QUIRK	(1 << 0)
+#define XHCI_RESET_EP_QUIRK	(1 << 1)
 };
 
 /* For testing purposes */
@@ -1136,6 +1168,13 @@ static inline void xhci_write_64(struct xhci_hcd *xhci,
 	writel(val_hi, ptr + 1);
 }
 
+static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci)
+{
+	u32 temp = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
+	return ((HC_VERSION(temp) == 0x95) &&
+			(xhci->quirks & XHCI_LINK_TRB_QUIRK));
+}
+
 /* xHCI debugging */
 void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num);
 void xhci_print_registers(struct xhci_hcd *xhci);
@@ -1150,7 +1189,7 @@ void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci);
 void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring);
 void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep);
 
-/* xHCI memory managment */
+/* xHCI memory management */
 void xhci_mem_cleanup(struct xhci_hcd *xhci);
 int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags);
 void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id);
@@ -1158,11 +1197,24 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device
 int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev);
 unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc);
 unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc);
+unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index);
+unsigned int xhci_last_valid_endpoint(u32 added_ctxs);
 void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep);
+void xhci_endpoint_copy(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *in_ctx,
+		struct xhci_container_ctx *out_ctx,
+		unsigned int ep_index);
+void xhci_slot_copy(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *in_ctx,
+		struct xhci_container_ctx *out_ctx);
 int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev,
 		struct usb_device *udev, struct usb_host_endpoint *ep,
 		gfp_t mem_flags);
 void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring);
+struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci,
+		bool allocate_completion, gfp_t mem_flags);
+void xhci_free_command(struct xhci_hcd *xhci,
+		struct xhci_command *command);
 
 #ifdef CONFIG_PCI
 /* xHCI PCI glue */
@@ -1182,6 +1234,8 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd);
 int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev);
 void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev);
 int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev);
+int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
+			struct usb_tt *tt, gfp_t mem_flags);
 int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags);
 int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
 int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
@@ -1205,7 +1259,11 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
 		int slot_id, unsigned int ep_index);
 int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
 		int slot_id, unsigned int ep_index);
+int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
+		int slot_id, unsigned int ep_index);
 int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
+		u32 slot_id, bool command_must_succeed);
+int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 		u32 slot_id);
 int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
 		unsigned int ep_index);
@@ -1213,8 +1271,13 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 		unsigned int slot_id, unsigned int ep_index,
 		struct xhci_td *cur_td, struct xhci_dequeue_state *state);
 void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
-		struct xhci_ring *ep_ring, unsigned int slot_id,
-		unsigned int ep_index, struct xhci_dequeue_state *deq_state);
+		unsigned int slot_id, unsigned int ep_index,
+		struct xhci_dequeue_state *deq_state);
+void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
+		struct usb_device *udev, unsigned int ep_index);
+void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci,
+		unsigned int slot_id, unsigned int ep_index,
+		struct xhci_dequeue_state *deq_state);
 
 /* xHCI roothub code */
 int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c
index 4541dfcea88f..459a7287fe01 100644
--- a/drivers/usb/image/microtek.c
+++ b/drivers/usb/image/microtek.c
@@ -653,33 +653,6 @@ static struct scsi_host_template mts_scsi_host_template = {
 	.max_sectors=		256, /* 128 K */
 };
 
-struct vendor_product
-{
-	char* name;
-	enum
-	{
-		mts_sup_unknown=0,
-		mts_sup_alpha,
-		mts_sup_full
-	}
-	support_status;
-} ;
-
-
-/* These are taken from the msmUSB.inf file on the Windows driver CD */
-static const struct vendor_product mts_supported_products[] =
-{
-	{ "Phantom 336CX",	mts_sup_unknown},
-	{ "Phantom 336CX",	mts_sup_unknown},
-	{ "Scanmaker X6",	mts_sup_alpha},
-	{ "Phantom C6",		mts_sup_unknown},
-	{ "Phantom 336CX",	mts_sup_unknown},
-	{ "ScanMaker V6USL",	mts_sup_unknown},
-	{ "ScanMaker V6USL",	mts_sup_unknown},
-	{ "Scanmaker V6UL",	mts_sup_unknown},
-	{ "Scanmaker V6UPL",	mts_sup_alpha},
-};
-
 /* The entries of microtek_table must correspond, line-by-line to
    the entries of mts_supported_products[]. */
 
@@ -711,7 +684,6 @@ static int mts_usb_probe(struct usb_interface *intf,
 	int err_retval = -ENOMEM;
 
 	struct mts_desc * new_desc;
-	struct vendor_product const* p;
 	struct usb_device *dev = interface_to_usbdev (intf);
 
 	/* the current altsetting on the interface we're probing */
@@ -726,15 +698,6 @@ static int mts_usb_probe(struct usb_interface *intf,
 
 	MTS_DEBUG_GOT_HERE();
 
-	p = &mts_supported_products[id - mts_usb_ids];
-
-	MTS_DEBUG_GOT_HERE();
-
-	MTS_DEBUG( "found model %s\n", p->name );
-	if ( p->support_status != mts_sup_full )
-		MTS_MESSAGE( "model %s is not known to be fully supported, reports welcome!\n",
-			     p->name );
-
 	/* the current altsetting on the interface we're probing */
 	altsetting = intf->cur_altsetting;
 
diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c
index 6da8887538c7..1337a9ce80b9 100644
--- a/drivers/usb/misc/idmouse.c
+++ b/drivers/usb/misc/idmouse.c
@@ -96,6 +96,8 @@ static int idmouse_probe(struct usb_interface *interface,
 				const struct usb_device_id *id);
 
 static void idmouse_disconnect(struct usb_interface *interface);
+static int idmouse_suspend(struct usb_interface *intf, pm_message_t message);
+static int idmouse_resume(struct usb_interface *intf);
 
 /* file operation pointers */
 static const struct file_operations idmouse_fops = {
@@ -117,7 +119,11 @@ static struct usb_driver idmouse_driver = {
 	.name = DRIVER_SHORT,
 	.probe = idmouse_probe,
 	.disconnect = idmouse_disconnect,
+	.suspend = idmouse_suspend,
+	.resume = idmouse_resume,
+	.reset_resume = idmouse_resume,
 	.id_table = idmouse_table,
+	.supports_autosuspend = 1,
 };
 
 static int idmouse_create_image(struct usb_idmouse *dev)
@@ -197,6 +203,17 @@ reset:
 	return result;
 }
 
+/* PM operations are nops as this driver does IO only during open() */
+static int idmouse_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	return 0;
+}
+
+static int idmouse_resume(struct usb_interface *intf)
+{
+	return 0;
+}
+
 static inline void idmouse_delete(struct usb_idmouse *dev)
 {
 	kfree(dev->bulk_in_buffer);
@@ -235,9 +252,13 @@ static int idmouse_open(struct inode *inode, struct file *file)
 	} else {
 
 		/* create a new image and check for success */
+		result = usb_autopm_get_interface(interface);
+		if (result)
+			goto error;
 		result = idmouse_create_image (dev);
 		if (result)
 			goto error;
+		usb_autopm_put_interface(interface);
 
 		/* increment our usage count for the driver */
 		++dev->open;
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index 90e1a8dedfa9..e75bb87ee92b 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -727,7 +727,7 @@ static const struct file_operations iowarrior_fops = {
 	.poll = iowarrior_poll,
 };
 
-static char *iowarrior_nodename(struct device *dev)
+static char *iowarrior_devnode(struct device *dev, mode_t *mode)
 {
 	return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
 }
@@ -738,7 +738,7 @@ static char *iowarrior_nodename(struct device *dev)
  */
 static struct usb_class_driver iowarrior_class = {
 	.name = "iowarrior%d",
-	.nodename = iowarrior_nodename,
+	.devnode = iowarrior_devnode,
 	.fops = &iowarrior_fops,
 	.minor_base = IOWARRIOR_MINOR_BASE,
 };
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index ad4fb15b5dcb..90f130126c10 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -412,6 +412,9 @@ static unsigned int ld_usb_poll(struct file *file, poll_table *wait)
 
 	dev = file->private_data;
 
+	if (!dev->intf)
+		return POLLERR | POLLHUP;
+
 	poll_wait(file, &dev->read_wait, wait);
 	poll_wait(file, &dev->write_wait, wait);
 
@@ -767,6 +770,9 @@ static void ld_usb_disconnect(struct usb_interface *intf)
 		ld_usb_delete(dev);
 	} else {
 		dev->intf = NULL;
+		/* wake up pollers */
+		wake_up_interruptible_all(&dev->read_wait);
+		wake_up_interruptible_all(&dev->write_wait);
 		mutex_unlock(&dev->mutex);
 	}
 
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index c1e2433f640d..faa6d623de78 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -266,7 +266,7 @@ static const struct file_operations tower_fops = {
 	.llseek =	tower_llseek,
 };
 
-static char *legousbtower_nodename(struct device *dev)
+static char *legousbtower_devnode(struct device *dev, mode_t *mode)
 {
 	return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
 }
@@ -277,7 +277,7 @@ static char *legousbtower_nodename(struct device *dev)
  */
 static struct usb_class_driver tower_class = {
 	.name =		"legousbtower%d",
-	.nodename = 	legousbtower_nodename,
+	.devnode = 	legousbtower_devnode,
 	.fops =		&tower_fops,
 	.minor_base =	LEGO_USB_TOWER_MINOR_BASE,
 };
@@ -552,6 +552,9 @@ static unsigned int tower_poll (struct file *file, poll_table *wait)
 
 	dev = file->private_data;
 
+	if (!dev->udev)
+		return POLLERR | POLLHUP;
+
 	poll_wait(file, &dev->read_wait, wait);
 	poll_wait(file, &dev->write_wait, wait);
 
@@ -1025,6 +1028,9 @@ static void tower_disconnect (struct usb_interface *interface)
 		tower_delete (dev);
 	} else {
 		dev->udev = NULL;
+		/* wake up pollers */
+		wake_up_interruptible_all(&dev->read_wait);
+		wake_up_interruptible_all(&dev->write_wait);
 		mutex_unlock(&dev->lock);
 	}
 
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index b4ec716de7da..0025847743f3 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -79,14 +79,12 @@ sisusb_free_buffers(struct sisusb_usb_data *sisusb)
 
 	for (i = 0; i < NUMOBUFS; i++) {
 		if (sisusb->obuf[i]) {
-			usb_buffer_free(sisusb->sisusb_dev, sisusb->obufsize,
-				sisusb->obuf[i], sisusb->transfer_dma_out[i]);
+			kfree(sisusb->obuf[i]);
 			sisusb->obuf[i] = NULL;
 		}
 	}
 	if (sisusb->ibuf) {
-		usb_buffer_free(sisusb->sisusb_dev, sisusb->ibufsize,
-			sisusb->ibuf, sisusb->transfer_dma_in);
+		kfree(sisusb->ibuf);
 		sisusb->ibuf = NULL;
 	}
 }
@@ -230,8 +228,7 @@ sisusb_bulk_completeout(struct urb *urb)
 
 static int
 sisusb_bulkout_msg(struct sisusb_usb_data *sisusb, int index, unsigned int pipe, void *data,
-		int len, int *actual_length, int timeout, unsigned int tflags,
-		dma_addr_t transfer_dma)
+		int len, int *actual_length, int timeout, unsigned int tflags)
 {
 	struct urb *urb = sisusb->sisurbout[index];
 	int retval, byteswritten = 0;
@@ -245,9 +242,6 @@ sisusb_bulkout_msg(struct sisusb_usb_data *sisusb, int index, unsigned int pipe,
 	urb->transfer_flags |= tflags;
 	urb->actual_length = 0;
 
-	if ((urb->transfer_dma = transfer_dma))
-		urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
 	/* Set up context */
 	sisusb->urbout_context[index].actual_length = (timeout) ?
 						NULL : actual_length;
@@ -297,8 +291,8 @@ sisusb_bulk_completein(struct urb *urb)
 }
 
 static int
-sisusb_bulkin_msg(struct sisusb_usb_data *sisusb, unsigned int pipe, void *data, int len,
-		int *actual_length, int timeout, unsigned int tflags, dma_addr_t transfer_dma)
+sisusb_bulkin_msg(struct sisusb_usb_data *sisusb, unsigned int pipe, void *data,
+	int len, int *actual_length, int timeout, unsigned int tflags)
 {
 	struct urb *urb = sisusb->sisurbin;
 	int retval, readbytes = 0;
@@ -311,9 +305,6 @@ sisusb_bulkin_msg(struct sisusb_usb_data *sisusb, unsigned int pipe, void *data,
 	urb->transfer_flags |= tflags;
 	urb->actual_length = 0;
 
-	if ((urb->transfer_dma = transfer_dma))
-		urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
 	sisusb->completein = 0;
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval == 0) {
@@ -422,8 +413,7 @@ static int sisusb_send_bulk_msg(struct sisusb_usb_data *sisusb, int ep, int len,
 						thispass,
 						&transferred_len,
 						async ? 0 : 5 * HZ,
-						tflags,
-						sisusb->transfer_dma_out[index]);
+						tflags);
 
 			if (result == -ETIMEDOUT) {
 
@@ -432,29 +422,16 @@ static int sisusb_send_bulk_msg(struct sisusb_usb_data *sisusb, int ep, int len,
 					return -ETIME;
 
 				continue;
+			}
 
-			} else if ((result == 0) && !async && transferred_len) {
+			if ((result == 0) && !async && transferred_len) {
 
 				thispass -= transferred_len;
-				if (thispass) {
-					if (sisusb->transfer_dma_out) {
-						/* If DMA, copy remaining
-						 * to beginning of buffer
-						 */
-						memcpy(buffer,
-						       buffer + transferred_len,
-						       thispass);
-					} else {
-						/* If not DMA, simply increase
-						 * the pointer
-						 */
-						buffer += transferred_len;
-					}
-				}
+				buffer += transferred_len;
 
 			} else
 				break;
-		};
+		}
 
 		if (result)
 			return result;
@@ -530,8 +507,7 @@ static int sisusb_recv_bulk_msg(struct sisusb_usb_data *sisusb, int ep, int len,
 					   thispass,
 					   &transferred_len,
 					   5 * HZ,
-					   tflags,
-					   sisusb->transfer_dma_in);
+					   tflags);
 
 		if (transferred_len)
 			thispass = transferred_len;
@@ -3132,8 +3108,7 @@ static int sisusb_probe(struct usb_interface *intf,
 
 	/* Allocate buffers */
 	sisusb->ibufsize = SISUSB_IBUF_SIZE;
-	if (!(sisusb->ibuf = usb_buffer_alloc(dev, SISUSB_IBUF_SIZE,
-					GFP_KERNEL, &sisusb->transfer_dma_in))) {
+	if (!(sisusb->ibuf = kmalloc(SISUSB_IBUF_SIZE, GFP_KERNEL))) {
 		dev_err(&sisusb->sisusb_dev->dev, "Failed to allocate memory for input buffer");
 		retval = -ENOMEM;
 		goto error_2;
@@ -3142,9 +3117,7 @@ static int sisusb_probe(struct usb_interface *intf,
 	sisusb->numobufs = 0;
 	sisusb->obufsize = SISUSB_OBUF_SIZE;
 	for (i = 0; i < NUMOBUFS; i++) {
-		if (!(sisusb->obuf[i] = usb_buffer_alloc(dev, SISUSB_OBUF_SIZE,
-					GFP_KERNEL,
-					&sisusb->transfer_dma_out[i]))) {
+		if (!(sisusb->obuf[i] = kmalloc(SISUSB_OBUF_SIZE, GFP_KERNEL))) {
 			if (i == 0) {
 				dev_err(&sisusb->sisusb_dev->dev, "Failed to allocate memory for output buffer\n");
 				retval = -ENOMEM;
diff --git a/drivers/usb/misc/sisusbvga/sisusb.h b/drivers/usb/misc/sisusbvga/sisusb.h
index cf0b4a5883f6..55492a5930bd 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.h
+++ b/drivers/usb/misc/sisusbvga/sisusb.h
@@ -123,8 +123,6 @@ struct sisusb_usb_data {
 	int numobufs;		/* number of obufs = number of out urbs */
 	char *obuf[NUMOBUFS], *ibuf;	/* transfer buffers */
 	int obufsize, ibufsize;
-	dma_addr_t transfer_dma_out[NUMOBUFS];
-	dma_addr_t transfer_dma_in;
 	struct urb *sisurbout[NUMOBUFS];
 	struct urb *sisurbin;
 	unsigned char urbstatus[NUMOBUFS];
diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c
index 28a6a3a09538..3db255537e79 100644
--- a/drivers/usb/misc/usbsevseg.c
+++ b/drivers/usb/misc/usbsevseg.c
@@ -38,6 +38,7 @@ static char *display_textmodes[] = {"raw", "hex", "ascii", NULL};
 
 struct usb_sevsegdev {
 	struct usb_device *udev;
+	struct usb_interface *intf;
 
 	u8 powered;
 	u8 mode_msb;
@@ -46,6 +47,8 @@ struct usb_sevsegdev {
 	u8 textmode;
 	u8 text[MAXLEN];
 	u16 textlength;
+
+	u8 shadow_power; /* for PM */
 };
 
 /* sysfs_streq can't replace this completely
@@ -65,6 +68,12 @@ static void update_display_powered(struct usb_sevsegdev *mydev)
 {
 	int rc;
 
+	if (!mydev->shadow_power && mydev->powered) {
+		rc = usb_autopm_get_interface(mydev->intf);
+		if (rc < 0)
+			return;
+	}
+
 	rc = usb_control_msg(mydev->udev,
 			usb_sndctrlpipe(mydev->udev, 0),
 			0x12,
@@ -76,12 +85,18 @@ static void update_display_powered(struct usb_sevsegdev *mydev)
 			2000);
 	if (rc < 0)
 		dev_dbg(&mydev->udev->dev, "power retval = %d\n", rc);
+
+	if (mydev->shadow_power && !mydev->powered)
+		usb_autopm_put_interface(mydev->intf);
 }
 
 static void update_display_mode(struct usb_sevsegdev *mydev)
 {
 	int rc;
 
+	if(mydev->shadow_power != 1)
+		return;
+
 	rc = usb_control_msg(mydev->udev,
 			usb_sndctrlpipe(mydev->udev, 0),
 			0x12,
@@ -96,14 +111,17 @@ static void update_display_mode(struct usb_sevsegdev *mydev)
 		dev_dbg(&mydev->udev->dev, "mode retval = %d\n", rc);
 }
 
-static void update_display_visual(struct usb_sevsegdev *mydev)
+static void update_display_visual(struct usb_sevsegdev *mydev, gfp_t mf)
 {
 	int rc;
 	int i;
 	unsigned char *buffer;
 	u8 decimals = 0;
 
-	buffer = kzalloc(MAXLEN, GFP_KERNEL);
+	if(mydev->shadow_power != 1)
+		return;
+
+	buffer = kzalloc(MAXLEN, mf);
 	if (!buffer) {
 		dev_err(&mydev->udev->dev, "out of memory\n");
 		return;
@@ -163,7 +181,7 @@ static ssize_t set_attr_##name(struct device *dev, 		\
 	struct usb_sevsegdev *mydev = usb_get_intfdata(intf);	\
 								\
 	mydev->name = simple_strtoul(buf, NULL, 10);		\
-	update_fcn(mydev); \
+	update_fcn(mydev); 					\
 								\
 	return count;						\
 }								\
@@ -194,7 +212,7 @@ static ssize_t set_attr_text(struct device *dev,
 	if (end > 0)
 		memcpy(mydev->text, buf, end);
 
-	update_display_visual(mydev);
+	update_display_visual(mydev, GFP_KERNEL);
 	return count;
 }
 
@@ -242,7 +260,7 @@ static ssize_t set_attr_decimals(struct device *dev,
 		if (buf[i] == '1')
 			mydev->decimals[end-1-i] = 1;
 
-	update_display_visual(mydev);
+	update_display_visual(mydev, GFP_KERNEL);
 
 	return count;
 }
@@ -286,7 +304,7 @@ static ssize_t set_attr_textmode(struct device *dev,
 	for (i = 0; display_textmodes[i]; i++) {
 		if (sysfs_streq(display_textmodes[i], buf)) {
 			mydev->textmode = i;
-			update_display_visual(mydev);
+			update_display_visual(mydev, GFP_KERNEL);
 			return count;
 		}
 	}
@@ -330,6 +348,7 @@ static int sevseg_probe(struct usb_interface *interface,
 	}
 
 	mydev->udev = usb_get_dev(udev);
+	mydev->intf = interface;
 	usb_set_intfdata(interface, mydev);
 
 	/*set defaults */
@@ -364,11 +383,49 @@ static void sevseg_disconnect(struct usb_interface *interface)
 	dev_info(&interface->dev, "USB 7 Segment now disconnected\n");
 }
 
+static int sevseg_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct usb_sevsegdev *mydev;
+
+	mydev = usb_get_intfdata(intf);
+	mydev->shadow_power = 0;
+
+	return 0;
+}
+
+static int sevseg_resume(struct usb_interface *intf)
+{
+	struct usb_sevsegdev *mydev;
+
+	mydev = usb_get_intfdata(intf);
+	mydev->shadow_power = 1;
+	update_display_mode(mydev);
+	update_display_visual(mydev, GFP_NOIO);
+
+	return 0;
+}
+
+static int sevseg_reset_resume(struct usb_interface *intf)
+{
+	struct usb_sevsegdev *mydev;
+
+	mydev = usb_get_intfdata(intf);
+	mydev->shadow_power = 1;
+	update_display_mode(mydev);
+	update_display_visual(mydev, GFP_NOIO);
+
+	return 0;
+}
+
 static struct usb_driver sevseg_driver = {
 	.name =		"usbsevseg",
 	.probe =	sevseg_probe,
 	.disconnect =	sevseg_disconnect,
+	.suspend =	sevseg_suspend,
+	.resume =	sevseg_resume,
+	.reset_resume =	sevseg_reset_resume,
 	.id_table =	id_table,
+	.supports_autosuspend = 1,
 };
 
 static int __init usb_sevseg_init(void)
diff --git a/drivers/usb/mon/Kconfig b/drivers/usb/mon/Kconfig
index f28f350cd96a..635745f57fbd 100644
--- a/drivers/usb/mon/Kconfig
+++ b/drivers/usb/mon/Kconfig
@@ -5,11 +5,9 @@
 config USB_MON
 	tristate "USB Monitor"
 	depends on USB
-	default y if USB=y
-	default m if USB=m
 	help
 	  If you select this option, a component which captures the USB traffic
 	  between peripheral-specific drivers and HC drivers will be built.
 	  For more information, see <file:Documentation/usb/usbmon.txt>.
 
-	  If unsure, say Y (if allowed), otherwise M.
+	  If unsure, say Y, if allowed, otherwise M.
diff --git a/drivers/usb/mon/Makefile b/drivers/usb/mon/Makefile
index c6516b566731..384b198faa7c 100644
--- a/drivers/usb/mon/Makefile
+++ b/drivers/usb/mon/Makefile
@@ -2,6 +2,6 @@
 # Makefile for USB monitor
 #
 
-usbmon-objs	:= mon_main.o mon_stat.o mon_text.o mon_bin.o mon_dma.o
+usbmon-objs	:= mon_main.o mon_stat.o mon_text.o mon_bin.o
 
 obj-$(CONFIG_USB_MON)	+= usbmon.o
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index 0f7a30b7d2d1..dfdc43e2e00d 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -220,9 +220,8 @@ static void mon_free_buff(struct mon_pgmap *map, int npages);
 
 /*
  * This is a "chunked memcpy". It does not manipulate any counters.
- * But it returns the new offset for repeated application.
  */
-unsigned int mon_copy_to_buff(const struct mon_reader_bin *this,
+static void mon_copy_to_buff(const struct mon_reader_bin *this,
     unsigned int off, const unsigned char *from, unsigned int length)
 {
 	unsigned int step_len;
@@ -247,7 +246,6 @@ unsigned int mon_copy_to_buff(const struct mon_reader_bin *this,
 		from += step_len;
 		length -= step_len;
 	}
-	return off;
 }
 
 /*
@@ -400,15 +398,8 @@ static char mon_bin_get_data(const struct mon_reader_bin *rp,
     unsigned int offset, struct urb *urb, unsigned int length)
 {
 
-	if (urb->dev->bus->uses_dma &&
-	    (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
-		mon_dmapeek_vec(rp, offset, urb->transfer_dma, length);
-		return 0;
-	}
-
 	if (urb->transfer_buffer == NULL)
 		return 'Z';
-
 	mon_copy_to_buff(rp, offset, urb->transfer_buffer, length);
 	return 0;
 }
@@ -635,7 +626,6 @@ static int mon_bin_open(struct inode *inode, struct file *file)
 	spin_lock_init(&rp->b_lock);
 	init_waitqueue_head(&rp->b_wait);
 	mutex_init(&rp->fetch_lock);
-
 	rp->b_size = BUFF_DFL;
 
 	size = sizeof(struct mon_pgmap) * (rp->b_size/CHUNK_SIZE);
diff --git a/drivers/usb/mon/mon_dma.c b/drivers/usb/mon/mon_dma.c
deleted file mode 100644
index 140cc80bd2b1..000000000000
--- a/drivers/usb/mon/mon_dma.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * The USB Monitor, inspired by Dave Harding's USBMon.
- *
- * mon_dma.c: Library which snoops on DMA areas.
- *
- * Copyright (C) 2005 Pete Zaitcev (zaitcev@redhat.com)
- */
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/highmem.h>
-#include <asm/page.h>
-
-#include <linux/usb.h>	/* Only needed for declarations in usb_mon.h */
-#include "usb_mon.h"
-
-/*
- * PC-compatibles, are, fortunately, sufficiently cache-coherent for this.
- */
-#if defined(__i386__) || defined(__x86_64__) /* CONFIG_ARCH_I386 doesn't exit */
-#define MON_HAS_UNMAP 1
-
-#define phys_to_page(phys)	pfn_to_page((phys) >> PAGE_SHIFT)
-
-char mon_dmapeek(unsigned char *dst, dma_addr_t dma_addr, int len)
-{
-	struct page *pg;
-	unsigned long flags;
-	unsigned char *map;
-	unsigned char *ptr;
-
-	/*
-	 * On i386, a DMA handle is the "physical" address of a page.
-	 * In other words, the bus address is equal to physical address.
-	 * There is no IOMMU.
-	 */
-	pg = phys_to_page(dma_addr);
-
-	/*
-	 * We are called from hardware IRQs in case of callbacks.
-	 * But we can be called from softirq or process context in case
-	 * of submissions. In such case, we need to protect KM_IRQ0.
-	 */
-	local_irq_save(flags);
-	map = kmap_atomic(pg, KM_IRQ0);
-	ptr = map + (dma_addr & (PAGE_SIZE-1));
-	memcpy(dst, ptr, len);
-	kunmap_atomic(map, KM_IRQ0);
-	local_irq_restore(flags);
-	return 0;
-}
-
-void mon_dmapeek_vec(const struct mon_reader_bin *rp,
-    unsigned int offset, dma_addr_t dma_addr, unsigned int length)
-{
-	unsigned long flags;
-	unsigned int step_len;
-	struct page *pg;
-	unsigned char *map;
-	unsigned long page_off, page_len;
-
-	local_irq_save(flags);
-	while (length) {
-		/* compute number of bytes we are going to copy in this page */
-		step_len = length;
-		page_off = dma_addr & (PAGE_SIZE-1);
-		page_len = PAGE_SIZE - page_off;
-		if (page_len < step_len)
-			step_len = page_len;
-
-		/* copy data and advance pointers */
-		pg = phys_to_page(dma_addr);
-		map = kmap_atomic(pg, KM_IRQ0);
-		offset = mon_copy_to_buff(rp, offset, map + page_off, step_len);
-		kunmap_atomic(map, KM_IRQ0);
-		dma_addr += step_len;
-		length -= step_len;
-	}
-	local_irq_restore(flags);
-}
-
-#endif /* __i386__ */
-
-#ifndef MON_HAS_UNMAP
-char mon_dmapeek(unsigned char *dst, dma_addr_t dma_addr, int len)
-{
-	return 'D';
-}
-
-void mon_dmapeek_vec(const struct mon_reader_bin *rp,
-    unsigned int offset, dma_addr_t dma_addr, unsigned int length)
-{
-	;
-}
-
-#endif /* MON_HAS_UNMAP */
diff --git a/drivers/usb/mon/mon_main.c b/drivers/usb/mon/mon_main.c
index 5e0ab4201c00..e0c2db3b767b 100644
--- a/drivers/usb/mon/mon_main.c
+++ b/drivers/usb/mon/mon_main.c
@@ -361,7 +361,6 @@ static int __init mon_init(void)
 	}
 	// MOD_INC_USE_COUNT(which_module?);
 
-
 	mutex_lock(&usb_bus_list_lock);
 	list_for_each_entry (ubus, &usb_bus_list, bus_list) {
 		mon_bus_init(ubus);
diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c
index a7eb4c99342c..9f1a9227ebe6 100644
--- a/drivers/usb/mon/mon_text.c
+++ b/drivers/usb/mon/mon_text.c
@@ -150,20 +150,6 @@ static inline char mon_text_get_data(struct mon_event_text *ep, struct urb *urb,
 			return '>';
 	}
 
-	/*
-	 * The check to see if it's safe to poke at data has an enormous
-	 * number of corner cases, but it seems that the following is
-	 * more or less safe.
-	 *
-	 * We do not even try to look at transfer_buffer, because it can
-	 * contain non-NULL garbage in case the upper level promised to
-	 * set DMA for the HCD.
-	 */
-	if (urb->dev->bus->uses_dma &&
-	    (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
-		return mon_dmapeek(ep->data, urb->transfer_dma, len);
-	}
-
 	if (urb->transfer_buffer == NULL)
 		return 'Z';	/* '0' would be not as pretty. */
 
diff --git a/drivers/usb/mon/usb_mon.h b/drivers/usb/mon/usb_mon.h
index f5d84ff8c101..df9a4df342c7 100644
--- a/drivers/usb/mon/usb_mon.h
+++ b/drivers/usb/mon/usb_mon.h
@@ -65,20 +65,6 @@ int __init mon_bin_init(void);
 void mon_bin_exit(void);
 
 /*
- * DMA interface.
- *
- * XXX The vectored side needs a serious re-thinking. Abstracting vectors,
- * like in Paolo's original patch, produces a double pkmap. We need an idea.
-*/
-extern char mon_dmapeek(unsigned char *dst, dma_addr_t dma_addr, int len);
-
-struct mon_reader_bin;
-extern void mon_dmapeek_vec(const struct mon_reader_bin *rp,
-    unsigned int offset, dma_addr_t dma_addr, unsigned int len);
-extern unsigned int mon_copy_to_buff(const struct mon_reader_bin *rp,
-    unsigned int offset, const unsigned char *from, unsigned int len);
-
-/*
  */
 extern struct mutex mon_lock;
 
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 1d26beddf2ca..3a61ddb62bd2 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1850,6 +1850,10 @@ static void musb_free(struct musb *musb)
 		dma_controller_destroy(c);
 	}
 
+#ifdef CONFIG_USB_MUSB_OTG
+	put_device(musb->xceiv->dev);
+#endif
+
 	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
 	musb_platform_exit(musb);
 	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
@@ -1859,10 +1863,6 @@ static void musb_free(struct musb *musb)
 		clk_put(musb->clock);
 	}
 
-#ifdef CONFIG_USB_MUSB_OTG
-	put_device(musb->xceiv->dev);
-#endif
-
 #ifdef CONFIG_USB_MUSB_HDRC_HCD
 	usb_put_hcd(musb_to_hcd(musb));
 #else
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index e0d56ef2bcb0..77a5f4188999 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -117,24 +117,7 @@ static void enable_vbus_draw(struct isp1301 *isp, unsigned mA)
 		pr_debug("  VBUS %d mA error %d\n", mA, status);
 }
 
-static void enable_vbus_source(struct isp1301 *isp)
-{
-	/* this board won't supply more than 8mA vbus power.
-	 * some boards can switch a 100ma "unit load" (or more).
-	 */
-}
-
-
-/* products will deliver OTG messages with LEDs, GUI, etc */
-static inline void notresponding(struct isp1301 *isp)
-{
-	printk(KERN_NOTICE "OTG device not responding.\n");
-}
-
-
-#endif
-
-#if defined(CONFIG_MACH_OMAP_H4)
+#else
 
 static void enable_vbus_draw(struct isp1301 *isp, unsigned mA)
 {
@@ -144,6 +127,8 @@ static void enable_vbus_draw(struct isp1301 *isp, unsigned mA)
 	 */
 }
 
+#endif
+
 static void enable_vbus_source(struct isp1301 *isp)
 {
 	/* this board won't supply more than 8mA vbus power.
@@ -159,8 +144,6 @@ static inline void notresponding(struct isp1301 *isp)
 }
 
 
-#endif
-
 /*-------------------------------------------------------------------------*/
 
 static struct i2c_driver isp1301_driver;
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index aec61880f36c..131e61adaaf7 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -31,14 +31,19 @@ static int debug;
 
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x6547, 0x0232) },
+	{ USB_DEVICE(0x18ec, 0x3118) },		/* USB to IrDA adapter */
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
 
-struct ark3116_private {
-	spinlock_t lock;
-	u8 termios_initialized;
-};
+static int is_irda(struct usb_serial *serial)
+{
+	struct usb_device *dev = serial->dev;
+	if (le16_to_cpu(dev->descriptor.idVendor) == 0x18ec &&
+			le16_to_cpu(dev->descriptor.idProduct) == 0x3118)
+		return 1;
+	return 0;
+}
 
 static inline void ARK3116_SND(struct usb_serial *serial, int seq,
 			       __u8 request, __u8 requesttype,
@@ -82,29 +87,28 @@ static inline void ARK3116_RCV_QUIET(struct usb_serial *serial,
 static int ark3116_attach(struct usb_serial *serial)
 {
 	char *buf;
-	struct ark3116_private *priv;
-	int i;
-
-	for (i = 0; i < serial->num_ports; ++i) {
-		priv = kzalloc(sizeof(struct ark3116_private), GFP_KERNEL);
-		if (!priv)
-			goto cleanup;
-		spin_lock_init(&priv->lock);
-
-		usb_set_serial_port_data(serial->port[i], priv);
-	}
 
 	buf = kmalloc(1, GFP_KERNEL);
 	if (!buf) {
 		dbg("error kmalloc -> out of mem?");
-		goto cleanup;
+		return -ENOMEM;
 	}
 
+	if (is_irda(serial))
+		dbg("IrDA mode");
+
 	/* 3 */
 	ARK3116_SND(serial, 3, 0xFE, 0x40, 0x0008, 0x0002);
 	ARK3116_SND(serial, 4, 0xFE, 0x40, 0x0008, 0x0001);
 	ARK3116_SND(serial, 5, 0xFE, 0x40, 0x0000, 0x0008);
-	ARK3116_SND(serial, 6, 0xFE, 0x40, 0x0000, 0x000B);
+	ARK3116_SND(serial, 6, 0xFE, 0x40, is_irda(serial) ? 0x0001 : 0x0000,
+		    0x000B);
+
+	if (is_irda(serial)) {
+		ARK3116_SND(serial, 1001, 0xFE, 0x40, 0x0000, 0x000C);
+		ARK3116_SND(serial, 1002, 0xFE, 0x40, 0x0041, 0x000D);
+		ARK3116_SND(serial, 1003, 0xFE, 0x40, 0x0001, 0x000A);
+	}
 
 	/* <-- seq7 */
 	ARK3116_RCV(serial,  7, 0xFE, 0xC0, 0x0000, 0x0003, 0x00, buf);
@@ -141,6 +145,8 @@ static int ark3116_attach(struct usb_serial *serial)
 	ARK3116_SND(serial, 147, 0xFE, 0x40, 0x0083, 0x0003);
 	ARK3116_SND(serial, 148, 0xFE, 0x40, 0x0038, 0x0000);
 	ARK3116_SND(serial, 149, 0xFE, 0x40, 0x0001, 0x0001);
+	if (is_irda(serial))
+		ARK3116_SND(serial, 1004, 0xFE, 0x40, 0x0000, 0x0009);
 	ARK3116_SND(serial, 150, 0xFE, 0x40, 0x0003, 0x0003);
 	ARK3116_RCV(serial, 151, 0xFE, 0xC0, 0x0000, 0x0004, 0x03, buf);
 	ARK3116_SND(serial, 152, 0xFE, 0x40, 0x0000, 0x0003);
@@ -149,13 +155,16 @@ static int ark3116_attach(struct usb_serial *serial)
 
 	kfree(buf);
 	return 0;
+}
 
-cleanup:
-	for (--i; i >= 0; --i) {
-		kfree(usb_get_serial_port_data(serial->port[i]));
-		usb_set_serial_port_data(serial->port[i], NULL);
-	}
-	return -ENOMEM;
+static void ark3116_init_termios(struct tty_struct *tty)
+{
+	struct ktermios *termios = tty->termios;
+	*termios = tty_std_termios;
+	termios->c_cflag = B9600 | CS8
+				      | CREAD | HUPCL | CLOCAL;
+	termios->c_ispeed = 9600;
+	termios->c_ospeed = 9600;
 }
 
 static void ark3116_set_termios(struct tty_struct *tty,
@@ -163,10 +172,8 @@ static void ark3116_set_termios(struct tty_struct *tty,
 				struct ktermios *old_termios)
 {
 	struct usb_serial *serial = port->serial;
-	struct ark3116_private *priv = usb_get_serial_port_data(port);
 	struct ktermios *termios = tty->termios;
 	unsigned int cflag = termios->c_cflag;
-	unsigned long flags;
 	int baud;
 	int ark3116_baud;
 	char *buf;
@@ -176,16 +183,6 @@ static void ark3116_set_termios(struct tty_struct *tty,
 
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave(&priv->lock, flags);
-	if (!priv->termios_initialized) {
-		*termios = tty_std_termios;
-		termios->c_cflag = B9600 | CS8
-					      | CREAD | HUPCL | CLOCAL;
-		termios->c_ispeed = 9600;
-		termios->c_ospeed = 9600;
-		priv->termios_initialized = 1;
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
 
 	cflag = termios->c_cflag;
 	termios->c_cflag &= ~(CMSPAR|CRTSCTS);
@@ -318,8 +315,7 @@ static void ark3116_set_termios(struct tty_struct *tty,
 	return;
 }
 
-static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filp)
+static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct ktermios tmp_termios;
 	struct usb_serial *serial = port->serial;
@@ -334,7 +330,7 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port,
 		return -ENOMEM;
 	}
 
-	result = usb_serial_generic_open(tty, port, filp);
+	result = usb_serial_generic_open(tty, port);
 	if (result)
 		goto err_out;
 
@@ -455,6 +451,7 @@ static struct usb_serial_driver ark3116_device = {
 	.num_ports =		1,
 	.attach =		ark3116_attach,
 	.set_termios =		ark3116_set_termios,
+	.init_termios =		ark3116_init_termios,
 	.ioctl =		ark3116_ioctl,
 	.tiocmget =		ark3116_tiocmget,
 	.open =			ark3116_open,
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 7033b031b443..a0467bc61627 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -92,7 +92,7 @@ static int debug;
 static int  belkin_sa_startup(struct usb_serial *serial);
 static void belkin_sa_release(struct usb_serial *serial);
 static int  belkin_sa_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+			struct usb_serial_port *port);
 static void belkin_sa_close(struct usb_serial_port *port);
 static void belkin_sa_read_int_callback(struct urb *urb);
 static void belkin_sa_set_termios(struct tty_struct *tty,
@@ -213,7 +213,7 @@ static void belkin_sa_release(struct usb_serial *serial)
 
 
 static int  belkin_sa_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+					struct usb_serial_port *port)
 {
 	int retval = 0;
 
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 2830766f5b39..59eff721fcc5 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -56,6 +56,18 @@
 #define CH341_BAUDBASE_FACTOR 1532620800
 #define CH341_BAUDBASE_DIVMAX 3
 
+/* Break support - the information used to implement this was gleaned from
+ * the Net/FreeBSD uchcom.c driver by Takanori Watanabe.  Domo arigato.
+ */
+
+#define CH341_REQ_WRITE_REG    0x9A
+#define CH341_REQ_READ_REG     0x95
+#define CH341_REG_BREAK1       0x05
+#define CH341_REG_BREAK2       0x18
+#define CH341_NBREAK_BITS_REG1 0x01
+#define CH341_NBREAK_BITS_REG2 0x40
+
+
 static int debug;
 
 static struct usb_device_id id_table [] = {
@@ -300,8 +312,7 @@ static void ch341_close(struct usb_serial_port *port)
 
 
 /* open this device, set default parameters */
-static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *filp)
+static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct ch341_private *priv = usb_get_serial_port_data(serial->port[0]);
@@ -333,7 +344,7 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
 		return -EPROTO;
 	}
 
-	r = usb_serial_generic_open(tty, port, filp);
+	r = usb_serial_generic_open(tty, port);
 
 out:	return r;
 }
@@ -374,6 +385,45 @@ static void ch341_set_termios(struct tty_struct *tty,
 	 */
 }
 
+static void ch341_break_ctl(struct tty_struct *tty, int break_state)
+{
+	const uint16_t ch341_break_reg =
+		CH341_REG_BREAK1 | ((uint16_t) CH341_REG_BREAK2 << 8);
+	struct usb_serial_port *port = tty->driver_data;
+	int r;
+	uint16_t reg_contents;
+	uint8_t break_reg[2];
+
+	dbg("%s()", __func__);
+
+	r = ch341_control_in(port->serial->dev, CH341_REQ_READ_REG,
+			ch341_break_reg, 0, break_reg, sizeof(break_reg));
+	if (r < 0) {
+		printk(KERN_WARNING "%s: USB control read error whilst getting"
+				" break register contents.\n", __FILE__);
+		return;
+	}
+	dbg("%s - initial ch341 break register contents - reg1: %x, reg2: %x",
+			__func__, break_reg[0], break_reg[1]);
+	if (break_state != 0) {
+		dbg("%s - Enter break state requested", __func__);
+		break_reg[0] &= ~CH341_NBREAK_BITS_REG1;
+		break_reg[1] &= ~CH341_NBREAK_BITS_REG2;
+	} else {
+		dbg("%s - Leave break state requested", __func__);
+		break_reg[0] |= CH341_NBREAK_BITS_REG1;
+		break_reg[1] |= CH341_NBREAK_BITS_REG2;
+	}
+	dbg("%s - New ch341 break register contents - reg1: %x, reg2: %x",
+			__func__, break_reg[0], break_reg[1]);
+	reg_contents = (uint16_t)break_reg[0] | ((uint16_t)break_reg[1] << 8);
+	r = ch341_control_out(port->serial->dev, CH341_REQ_WRITE_REG,
+			ch341_break_reg, reg_contents);
+	if (r < 0)
+		printk(KERN_WARNING "%s: USB control write error whilst setting"
+				" break register contents.\n", __FILE__);
+}
+
 static int ch341_tiocmset(struct tty_struct *tty, struct file *file,
 			  unsigned int set, unsigned int clear)
 {
@@ -577,6 +627,7 @@ static struct usb_serial_driver ch341_device = {
 	.close             = ch341_close,
 	.ioctl             = ch341_ioctl,
 	.set_termios       = ch341_set_termios,
+	.break_ctl         = ch341_break_ctl,
 	.tiocmget          = ch341_tiocmget,
 	.tiocmset          = ch341_tiocmset,
 	.read_int_callback = ch341_read_int_callback,
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 0e4f2e41ace5..b22ac3258523 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -16,6 +16,7 @@
 #include <linux/slab.h>
 #include <linux/tty.h>
 #include <linux/console.h>
+#include <linux/serial.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
@@ -63,7 +64,7 @@ static int usb_console_setup(struct console *co, char *options)
 	char *s;
 	struct usb_serial *serial;
 	struct usb_serial_port *port;
-	int retval = 0;
+	int retval;
 	struct tty_struct *tty = NULL;
 	struct ktermios *termios = NULL, dummy;
 
@@ -116,13 +117,17 @@ static int usb_console_setup(struct console *co, char *options)
 		return -ENODEV;
 	}
 
-	port = serial->port[0];
+	retval = usb_autopm_get_interface(serial->interface);
+	if (retval)
+		goto error_get_interface;
+
+	port = serial->port[co->index - serial->minor];
 	tty_port_tty_set(&port->port, NULL);
 
 	info->port = port;
 
 	++port->port.count;
-	if (port->port.count == 1) {
+	if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) {
 		if (serial->type->set_termios) {
 			/*
 			 * allocate a fake tty so the driver can initialize
@@ -150,9 +155,9 @@ static int usb_console_setup(struct console *co, char *options)
 		/* only call the device specific open if this
 		 * is the first time the port is opened */
 		if (serial->type->open)
-			retval = serial->type->open(NULL, port, NULL);
+			retval = serial->type->open(NULL, port);
 		else
-			retval = usb_serial_generic_open(NULL, port, NULL);
+			retval = usb_serial_generic_open(NULL, port);
 
 		if (retval) {
 			err("could not open USB console port");
@@ -168,6 +173,7 @@ static int usb_console_setup(struct console *co, char *options)
 			kfree(termios);
 			kfree(tty);
 		}
+		set_bit(ASYNCB_INITIALIZED, &port->port.flags);
 	}
 	/* Now that any required fake tty operations are completed restore
 	 * the tty port count */
@@ -175,18 +181,22 @@ static int usb_console_setup(struct console *co, char *options)
 	/* The console is special in terms of closing the device so
 	 * indicate this port is now acting as a system console. */
 	port->console = 1;
-	retval = 0;
 
-out:
+	mutex_unlock(&serial->disc_mutex);
 	return retval;
-free_termios:
+
+ free_termios:
 	kfree(termios);
 	tty_port_tty_set(&port->port, NULL);
-free_tty:
+ free_tty:
 	kfree(tty);
-reset_open_count:
+ reset_open_count:
 	port->port.count = 0;
-	goto out;
+	usb_autopm_put_interface(serial->interface);
+ error_get_interface:
+	usb_serial_put(serial);
+	mutex_unlock(&serial->disc_mutex);
+	return retval;
 }
 
 static void usb_console_write(struct console *co,
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 985cbcf48bda..4a208fe85bc9 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -33,8 +33,7 @@
 /*
  * Function Prototypes
  */
-static int cp210x_open(struct tty_struct *, struct usb_serial_port *,
-							struct file *);
+static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *);
 static void cp210x_cleanup(struct usb_serial_port *);
 static void cp210x_close(struct usb_serial_port *);
 static void cp210x_get_termios(struct tty_struct *,
@@ -368,8 +367,7 @@ static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
 	return baud;
 }
 
-static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *filp)
+static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	int result;
@@ -399,12 +397,6 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port,
 
 	/* Configure the termios structure */
 	cp210x_get_termios(tty, port);
-
-	/* Set the DTR and RTS pins low */
-	cp210x_tiocmset_port(tty ? (struct usb_serial_port *) tty->driver_data
-			: port,
-		NULL, TIOCM_DTR | TIOCM_RTS, 0);
-
 	return 0;
 }
 
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 336523fd7366..b0f6402a91ca 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -61,7 +61,7 @@ static int cyberjack_startup(struct usb_serial *serial);
 static void cyberjack_disconnect(struct usb_serial *serial);
 static void cyberjack_release(struct usb_serial *serial);
 static int  cyberjack_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+	struct usb_serial_port *port);
 static void cyberjack_close(struct usb_serial_port *port);
 static int cyberjack_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count);
@@ -173,7 +173,7 @@ static void cyberjack_release(struct usb_serial *serial)
 }
 
 static int  cyberjack_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+					struct usb_serial_port *port)
 {
 	struct cyberjack_private *priv;
 	unsigned long flags;
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 59adfe123110..e0a8b715f2f2 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -172,8 +172,7 @@ static int  cypress_earthmate_startup(struct usb_serial *serial);
 static int  cypress_hidcom_startup(struct usb_serial *serial);
 static int  cypress_ca42v2_startup(struct usb_serial *serial);
 static void cypress_release(struct usb_serial *serial);
-static int  cypress_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static int  cypress_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void cypress_close(struct usb_serial_port *port);
 static void cypress_dtr_rts(struct usb_serial_port *port, int on);
 static int  cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -633,8 +632,7 @@ static void cypress_release(struct usb_serial *serial)
 }
 
 
-static int cypress_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	struct usb_serial *serial = port->serial;
@@ -659,15 +657,7 @@ static int cypress_open(struct tty_struct *tty,
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	/* Set termios */
-	result = cypress_write(tty, port, NULL, 0);
-
-	if (result) {
-		dev_err(&port->dev,
-			"%s - failed setting the control lines - error %d\n",
-							__func__, result);
-		return result;
-	} else
-		dbg("%s - success setting the control lines", __func__);
+	cypress_send(port);
 
 	if (tty)
 		cypress_set_termios(tty, port, &priv->tmp_termios);
@@ -1005,6 +995,8 @@ static void cypress_set_termios(struct tty_struct *tty,
 	dbg("%s - port %d", __func__, port->number);
 
 	spin_lock_irqsave(&priv->lock, flags);
+	/* We can't clean this one up as we don't know the device type
+	   early enough */
 	if (!priv->termios_initialized) {
 		if (priv->chiptype == CT_EARTHMATE) {
 			*(tty->termios) = tty_std_termios;
diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h
index e772b01ac3ac..1fd360e04065 100644
--- a/drivers/usb/serial/cypress_m8.h
+++ b/drivers/usb/serial/cypress_m8.h
@@ -57,7 +57,7 @@
 #define	UART_RI		0x10	/* ring indicator - modem - device to host */
 #define UART_CD		0x40	/* carrier detect - modem - device to host */
 #define CYP_ERROR 	0x08	/* received from input report - device to host */
-/* Note - the below has nothing to to with the "feature report" reset */
+/* Note - the below has nothing to do with the "feature report" reset */
 #define CONTROL_RESET	0x08  	/* sent with output report - host to device */
 
 /* End of RS-232 protocol definitions */
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index f4808091c47c..ab3dd991586b 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -453,8 +453,7 @@ static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
 static void digi_write_bulk_callback(struct urb *urb);
 static int digi_write_room(struct tty_struct *tty);
 static int digi_chars_in_buffer(struct tty_struct *tty);
-static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
-	struct file *filp);
+static int digi_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void digi_close(struct usb_serial_port *port);
 static int digi_carrier_raised(struct usb_serial_port *port);
 static void digi_dtr_rts(struct usb_serial_port *port, int on);
@@ -1347,8 +1346,7 @@ static int digi_carrier_raised(struct usb_serial_port *port)
 	return 0;
 }
 
-static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *filp)
+static int digi_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int ret;
 	unsigned char buf[32];
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 80cb3471adbe..33c9e9cf9eb2 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -79,8 +79,7 @@ static int debug;
 #define EMPEG_PRODUCT_ID		0x0001
 
 /* function prototypes for an empeg-car player */
-static int  empeg_open(struct tty_struct *tty, struct usb_serial_port *port,
-						struct file *filp);
+static int  empeg_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void empeg_close(struct usb_serial_port *port);
 static int  empeg_write(struct tty_struct *tty, struct usb_serial_port *port,
 						const unsigned char *buf,
@@ -90,8 +89,7 @@ static int  empeg_chars_in_buffer(struct tty_struct *tty);
 static void empeg_throttle(struct tty_struct *tty);
 static void empeg_unthrottle(struct tty_struct *tty);
 static int  empeg_startup(struct usb_serial *serial);
-static void empeg_set_termios(struct tty_struct *tty,
-		struct usb_serial_port *port, struct ktermios *old_termios);
+static void empeg_init_termios(struct tty_struct *tty);
 static void empeg_write_bulk_callback(struct urb *urb);
 static void empeg_read_bulk_callback(struct urb *urb);
 
@@ -123,7 +121,7 @@ static struct usb_serial_driver empeg_device = {
 	.throttle =		empeg_throttle,
 	.unthrottle =		empeg_unthrottle,
 	.attach =		empeg_startup,
-	.set_termios =		empeg_set_termios,
+	.init_termios =		empeg_init_termios,
 	.write =		empeg_write,
 	.write_room =		empeg_write_room,
 	.chars_in_buffer =	empeg_chars_in_buffer,
@@ -142,17 +140,13 @@ static int		bytes_out;
 /******************************************************************************
  * Empeg specific driver functions
  ******************************************************************************/
-static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *filp)
+static int empeg_open(struct tty_struct *tty,struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	int result = 0;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	/* Force default termio settings */
-	empeg_set_termios(tty, port, NULL) ;
-
 	bytes_in = 0;
 	bytes_out = 0;
 
@@ -425,11 +419,9 @@ static int  empeg_startup(struct usb_serial *serial)
 }
 
 
-static void empeg_set_termios(struct tty_struct *tty,
-		struct usb_serial_port *port, struct ktermios *old_termios)
+static void empeg_init_termios(struct tty_struct *tty)
 {
 	struct ktermios *termios = tty->termios;
-	dbg("%s - port %d", __func__, port->number);
 
 	/*
 	 * The empeg-car player wants these particular tty settings.
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8fec5d4455c9..4f883b1773d0 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -176,6 +176,9 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_SNIFFER_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_THROTTLE_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GATEWAY_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
@@ -694,6 +697,8 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(DE_VID, WHT_PID) },
 	{ USB_DEVICE(ADI_VID, ADI_GNICE_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
 	{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
@@ -702,6 +707,8 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
 	{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
+	{ USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
@@ -747,8 +754,7 @@ static int  ftdi_sio_probe(struct usb_serial *serial,
 					const struct usb_device_id *id);
 static int  ftdi_sio_port_probe(struct usb_serial_port *port);
 static int  ftdi_sio_port_remove(struct usb_serial_port *port);
-static int  ftdi_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static int  ftdi_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void ftdi_close(struct usb_serial_port *port);
 static void ftdi_dtr_rts(struct usb_serial_port *port, int on);
 static int  ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -1680,8 +1686,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
 	return 0;
 }
 
-static int ftdi_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 { /* ftdi_open */
 	struct usb_device *dev = port->serial->dev;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 8c92b88166ae..6f31e0d71898 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -81,6 +81,9 @@
 
 /* OpenDCC (www.opendcc.de) product id */
 #define FTDI_OPENDCC_PID	0xBFD8
+#define FTDI_OPENDCC_SNIFFER_PID	0xBFD9
+#define FTDI_OPENDCC_THROTTLE_PID	0xBFDA
+#define FTDI_OPENDCC_GATEWAY_PID	0xBFDB
 
 /* Sprog II (Andrew Crosland's SprogII DCC interface) */
 #define FTDI_SPROG_II		0xF0C8
@@ -930,6 +933,7 @@
  */
 #define ADI_VID 		0x0456
 #define ADI_GNICE_PID 		0xF000
+#define ADI_GNICEPLUS_PID 	0xF001
 
 /*
  * JETI SPECTROMETER SPECBOS 1201
@@ -968,6 +972,12 @@
 #define MARVELL_OPENRD_PID	0x9e90
 
 /*
+ * Hameg HO820 and HO870 interface (using VID 0x0403)
+ */
+#define        HAMEG_HO820_PID         0xed74
+#define        HAMEG_HO870_PID         0xed71
+
+/*
  *   BmRequestType:  1100 0000b
  *   bRequest:       FTDI_E2_READ
  *   wValue:         0
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 8839f1c70b7f..20432d345529 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -933,8 +933,7 @@ static int garmin_init_session(struct usb_serial_port *port)
 
 
 
-static int garmin_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int garmin_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	unsigned long flags;
 	int status = 0;
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index ce57f6a32bdf..deba08c7a015 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -19,7 +19,7 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include <linux/uaccess.h>
-
+#include <linux/kfifo.h>
 
 static int debug;
 
@@ -114,8 +114,7 @@ void usb_serial_generic_deregister(void)
 #endif
 }
 
-int usb_serial_generic_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	int result = 0;
@@ -167,24 +166,6 @@ static void generic_cleanup(struct usb_serial_port *port)
 	}
 }
 
-int usb_serial_generic_resume(struct usb_serial *serial)
-{
-	struct usb_serial_port *port;
-	int i, c = 0, r;
-
-	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-		if (port->port.count && port->read_urb) {
-			r = usb_submit_urb(port->read_urb, GFP_NOIO);
-			if (r < 0)
-				c++;
-		}
-	}
-
-	return c ? -EIO : 0;
-}
-EXPORT_SYMBOL_GPL(usb_serial_generic_resume);
-
 void usb_serial_generic_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
@@ -273,12 +254,81 @@ error_no_buffer:
 	return bwrite;
 }
 
+/**
+ * usb_serial_generic_write_start - kick off an URB write
+ * @port:	Pointer to the &struct usb_serial_port data
+ *
+ * Returns the number of bytes queued on success. This will be zero if there
+ * was nothing to send. Otherwise, it returns a negative errno value
+ */
+static int usb_serial_generic_write_start(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	unsigned char *data;
+	int result;
+	int count;
+	unsigned long flags;
+	bool start_io;
+
+	/* Atomically determine whether we can and need to start a USB
+	 * operation. */
+	spin_lock_irqsave(&port->lock, flags);
+	if (port->write_urb_busy)
+		start_io = false;
+	else {
+		start_io = (__kfifo_len(port->write_fifo) != 0);
+		port->write_urb_busy = start_io;
+	}
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	if (!start_io)
+		return 0;
+
+	data = port->write_urb->transfer_buffer;
+	count = kfifo_get(port->write_fifo, data, port->bulk_out_size);
+	usb_serial_debug_data(debug, &port->dev, __func__, count, data);
+
+	/* set up our urb */
+	usb_fill_bulk_urb(port->write_urb, serial->dev,
+			   usb_sndbulkpipe(serial->dev,
+				port->bulk_out_endpointAddress),
+			   port->write_urb->transfer_buffer, count,
+			   ((serial->type->write_bulk_callback) ?
+			     serial->type->write_bulk_callback :
+			     usb_serial_generic_write_bulk_callback),
+			   port);
+
+	/* send the data out the bulk port */
+	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+	if (result) {
+		dev_err(&port->dev,
+			"%s - failed submitting write urb, error %d\n",
+						__func__, result);
+		/* don't have to grab the lock here, as we will
+		   retry if != 0 */
+		port->write_urb_busy = 0;
+	} else
+		result = count;
+
+	return result;
+}
+
+/**
+ * usb_serial_generic_write - generic write function for serial USB devices
+ * @tty:	Pointer to &struct tty_struct for the device
+ * @port:	Pointer to the &usb_serial_port structure for the device
+ * @buf:	Pointer to the data to write
+ * @count:	Number of bytes to write
+ *
+ * Returns the number of characters actually written, which may be anything
+ * from zero to @count. If an error occurs, it returns the negative errno
+ * value.
+ */
 int usb_serial_generic_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count)
 {
 	struct usb_serial *serial = port->serial;
 	int result;
-	unsigned char *data;
 
 	dbg("%s - port %d", __func__, port->number);
 
@@ -288,57 +338,20 @@ int usb_serial_generic_write(struct tty_struct *tty,
 	}
 
 	/* only do something if we have a bulk out endpoint */
-	if (serial->num_bulk_out) {
-		unsigned long flags;
-
-		if (serial->type->max_in_flight_urbs)
-			return usb_serial_multi_urb_write(tty, port,
-							  buf, count);
-
-		spin_lock_irqsave(&port->lock, flags);
-		if (port->write_urb_busy) {
-			spin_unlock_irqrestore(&port->lock, flags);
-			dbg("%s - already writing", __func__);
-			return 0;
-		}
-		port->write_urb_busy = 1;
-		spin_unlock_irqrestore(&port->lock, flags);
-
-		count = (count > port->bulk_out_size) ?
-					port->bulk_out_size : count;
-
-		memcpy(port->write_urb->transfer_buffer, buf, count);
-		data = port->write_urb->transfer_buffer;
-		usb_serial_debug_data(debug, &port->dev, __func__, count, data);
+	if (!serial->num_bulk_out)
+		return 0;
 
-		/* set up our urb */
-		usb_fill_bulk_urb(port->write_urb, serial->dev,
-				   usb_sndbulkpipe(serial->dev,
-					port->bulk_out_endpointAddress),
-				   port->write_urb->transfer_buffer, count,
-				   ((serial->type->write_bulk_callback) ?
-				     serial->type->write_bulk_callback :
-				     usb_serial_generic_write_bulk_callback),
-				   port);
+	if (serial->type->max_in_flight_urbs)
+		return usb_serial_multi_urb_write(tty, port,
+						  buf, count);
 
-		/* send the data out the bulk port */
-		port->write_urb_busy = 1;
-		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-		if (result) {
-			dev_err(&port->dev,
-				"%s - failed submitting write urb, error %d\n",
-							__func__, result);
-			/* don't have to grab the lock here, as we will
-			   retry if != 0 */
-			port->write_urb_busy = 0;
-		} else
-			result = count;
+	count = kfifo_put(port->write_fifo, buf, count);
+	result = usb_serial_generic_write_start(port);
 
-		return result;
-	}
+	if (result >= 0)
+		result = count;
 
-	/* no bulk out, so return 0 bytes written */
-	return 0;
+	return result;
 }
 EXPORT_SYMBOL_GPL(usb_serial_generic_write);
 
@@ -356,9 +369,8 @@ int usb_serial_generic_write_room(struct tty_struct *tty)
 			room = port->bulk_out_size *
 				(serial->type->max_in_flight_urbs -
 				 port->urbs_in_flight);
-	} else if (serial->num_bulk_out && !(port->write_urb_busy)) {
-		room = port->bulk_out_size;
-	}
+	} else if (serial->num_bulk_out)
+		room = port->write_fifo->size - __kfifo_len(port->write_fifo);
 	spin_unlock_irqrestore(&port->lock, flags);
 
 	dbg("%s - returns %d", __func__, room);
@@ -378,11 +390,8 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty)
 		spin_lock_irqsave(&port->lock, flags);
 		chars = port->tx_bytes_flight;
 		spin_unlock_irqrestore(&port->lock, flags);
-	} else if (serial->num_bulk_out) {
-		/* FIXME: Locking */
-		if (port->write_urb_busy)
-			chars = port->write_urb->transfer_buffer_length;
-	}
+	} else if (serial->num_bulk_out)
+		chars = kfifo_len(port->write_fifo);
 
 	dbg("%s - returns %d", __func__, chars);
 	return chars;
@@ -486,16 +495,23 @@ void usb_serial_generic_write_bulk_callback(struct urb *urb)
 		if (port->urbs_in_flight < 0)
 			port->urbs_in_flight = 0;
 		spin_unlock_irqrestore(&port->lock, flags);
+
+		if (status) {
+			dbg("%s - nonzero multi-urb write bulk status "
+				"received: %d", __func__, status);
+			return;
+		}
 	} else {
-		/* Handle the case for single urb mode */
 		port->write_urb_busy = 0;
-	}
 
-	if (status) {
-		dbg("%s - nonzero write bulk status received: %d",
-		    __func__, status);
-		return;
+		if (status) {
+			dbg("%s - nonzero multi-urb write bulk status "
+				"received: %d", __func__, status);
+			kfifo_reset(port->write_fifo);
+		} else
+			usb_serial_generic_write_start(port);
 	}
+
 	usb_serial_port_softint(port);
 }
 EXPORT_SYMBOL_GPL(usb_serial_generic_write_bulk_callback);
@@ -560,6 +576,33 @@ int usb_serial_handle_break(struct usb_serial_port *port)
 }
 EXPORT_SYMBOL_GPL(usb_serial_handle_break);
 
+int usb_serial_generic_resume(struct usb_serial *serial)
+{
+	struct usb_serial_port *port;
+	int i, c = 0, r;
+
+	for (i = 0; i < serial->num_ports; i++) {
+		port = serial->port[i];
+		if (!port->port.count)
+			continue;
+
+		if (port->read_urb) {
+			r = usb_submit_urb(port->read_urb, GFP_NOIO);
+			if (r < 0)
+				c++;
+		}
+
+		if (port->write_urb) {
+			r = usb_serial_generic_write_start(port);
+			if (r < 0)
+				c++;
+		}
+	}
+
+	return c ? -EIO : 0;
+}
+EXPORT_SYMBOL_GPL(usb_serial_generic_resume);
+
 void usb_serial_generic_disconnect(struct usb_serial *serial)
 {
 	int i;
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 0191693625d6..b97960ac92f2 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -205,8 +205,7 @@ static void edge_bulk_out_data_callback(struct urb *urb);
 static void edge_bulk_out_cmd_callback(struct urb *urb);
 
 /* function prototypes for the usbserial callbacks */
-static int edge_open(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filp);
+static int edge_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void edge_close(struct usb_serial_port *port);
 static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count);
@@ -852,8 +851,7 @@ static void edge_bulk_out_cmd_callback(struct urb *urb)
  *	If successful, we return 0
  *	Otherwise we return a negative error number.
  *****************************************************************************/
-static int edge_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	struct usb_serial *serial;
@@ -2542,7 +2540,7 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor)
 
 /*****************************************************************************
  * send_cmd_write_uart_register
- *  this function builds up a uart register message and sends to to the device.
+ *  this function builds up a uart register message and sends to the device.
  *****************************************************************************/
 static int send_cmd_write_uart_register(struct edgeport_port *edge_port,
 						__u8 regNum, __u8 regValue)
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index e8bc42f92e79..d4cc0f7af400 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -1831,8 +1831,7 @@ static void edge_bulk_out_callback(struct urb *urb)
 	tty_kref_put(tty);
 }
 
-static int edge_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	struct edgeport_serial *edge_serial;
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 2545d45ce16f..24fcc64b837d 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -75,7 +75,7 @@ static int initial_wait;
 
 /* Function prototypes for an ipaq */
 static int  ipaq_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+			struct usb_serial_port *port);
 static void ipaq_close(struct usb_serial_port *port);
 static int  ipaq_calc_num_ports(struct usb_serial *serial);
 static int  ipaq_startup(struct usb_serial *serial);
@@ -587,7 +587,7 @@ static int		bytes_in;
 static int		bytes_out;
 
 static int ipaq_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+			struct usb_serial_port *port)
 {
 	struct usb_serial	*serial = port->serial;
 	struct ipaq_private	*priv;
@@ -628,11 +628,6 @@ static int ipaq_open(struct tty_struct *tty,
 		priv->free_len += PACKET_SIZE;
 	}
 
-	if (tty) {
-		/* FIXME: These two are bogus */
-		tty->raw = 1;
-		tty->real_raw = 1;
-	}
 	/*
 	 * Lose the small buffers usbserial provides. Make larger ones.
 	 */
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index 29ad038b9c8d..727d323f092a 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -193,8 +193,7 @@ static void ipw_read_bulk_callback(struct urb *urb)
 	return;
 }
 
-static int ipw_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_device *dev = port->serial->dev;
 	u8 buf_flow_static[16] = IPW_BYTES_FLOWINIT;
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 66009b6b763a..95d8d26b9a44 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -86,8 +86,7 @@ static int buffer_size;
 static int xbof = -1;
 
 static int  ir_startup (struct usb_serial *serial);
-static int  ir_open(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filep);
+static int  ir_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void ir_close(struct usb_serial_port *port);
 static int  ir_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count);
@@ -296,8 +295,7 @@ static int ir_startup(struct usb_serial *serial)
 	return 0;
 }
 
-static int ir_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int ir_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	char *buffer;
 	int result = 0;
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 96873a7a32b0..e6e02b178d2b 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -40,7 +40,7 @@ static int debug;
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v0.10"
+#define DRIVER_VERSION "v0.11"
 #define DRIVER_DESC "Infinity USB Unlimited Phoenix driver"
 
 static struct usb_device_id id_table[] = {
@@ -64,6 +64,7 @@ static int cdmode = 1;
 static int iuu_cardin;
 static int iuu_cardout;
 static int xmas;
+static int vcc_default = 5;
 
 static void read_rxcmd_callback(struct urb *urb);
 
@@ -71,7 +72,6 @@ struct iuu_private {
 	spinlock_t lock;	/* store irq state */
 	wait_queue_head_t delta_msr_wait;
 	u8 line_status;
-	u8 termios_initialized;
 	int tiostatus;		/* store IUART SIGNAL for tiocmget call */
 	u8 reset;		/* if 1 reset is needed */
 	int poll;		/* number of poll */
@@ -80,6 +80,7 @@ struct iuu_private {
 	u8 *buf;		/* used for initialize speed */
 	u8 *dbgbuf;		/* debug buffer */
 	u8 len;
+	int vcc;		/* vcc (either 3 or 5 V) */
 };
 
 
@@ -115,6 +116,7 @@ static int iuu_startup(struct usb_serial *serial)
 		kfree(priv);
 		return -ENOMEM;
 	}
+	priv->vcc = vcc_default;
 	spin_lock_init(&priv->lock);
 	init_waitqueue_head(&priv->delta_msr_wait);
 	usb_set_serial_port_data(serial->port[0], priv);
@@ -1010,22 +1012,28 @@ static void iuu_close(struct usb_serial_port *port)
 		usb_kill_urb(port->write_urb);
 		usb_kill_urb(port->read_urb);
 		usb_kill_urb(port->interrupt_in_urb);
-		msleep(1000);
-		/* wait one second to free all buffers */
 		iuu_led(port, 0, 0, 0xF000, 0xFF);
-		msleep(1000);
-		usb_reset_device(port->serial->dev);
 	}
 }
 
-static int iuu_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void iuu_init_termios(struct tty_struct *tty)
+{
+	*(tty->termios) = tty_std_termios;
+	tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600
+				| TIOCM_CTS | CSTOPB | PARENB;
+	tty->termios->c_ispeed = 9600;
+	tty->termios->c_ospeed = 9600;
+	tty->termios->c_lflag = 0;
+	tty->termios->c_oflag = 0;
+	tty->termios->c_iflag = 0;
+}
+
+static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	u8 *buf;
 	int result;
 	u32 actual;
-	unsigned long flags;
 	struct iuu_private *priv = usb_get_serial_port_data(port);
 
 	dbg("%s -  port %d", __func__, port->number);
@@ -1064,21 +1072,7 @@ static int iuu_open(struct tty_struct *tty,
 			  port->bulk_in_buffer, 512,
 			  NULL, NULL);
 
-	/* set the termios structure */
-	spin_lock_irqsave(&priv->lock, flags);
-	if (tty && !priv->termios_initialized) {
-		*(tty->termios) = tty_std_termios;
-		tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600
-					| TIOCM_CTS | CSTOPB | PARENB;
-		tty->termios->c_ispeed = 9600;
-		tty->termios->c_ospeed = 9600;
-		tty->termios->c_lflag = 0;
-		tty->termios->c_oflag = 0;
-		tty->termios->c_iflag = 0;
-		priv->termios_initialized = 1;
-		priv->poll = 0;
-	 }
-	spin_unlock_irqrestore(&priv->lock, flags);
+	priv->poll = 0;
 
 	/* initialize writebuf */
 #define FISH(a, b, c, d) do { \
@@ -1187,6 +1181,95 @@ static int iuu_open(struct tty_struct *tty,
 	return result;
 }
 
+/* how to change VCC */
+static int iuu_vcc_set(struct usb_serial_port *port, unsigned int vcc)
+{
+	int status;
+	u8 *buf;
+
+	buf = kmalloc(5, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	dbg("%s - enter", __func__);
+
+	buf[0] = IUU_SET_VCC;
+	buf[1] = vcc & 0xFF;
+	buf[2] = (vcc >> 8) & 0xFF;
+	buf[3] = (vcc >> 16) & 0xFF;
+	buf[4] = (vcc >> 24) & 0xFF;
+
+	status = bulk_immediate(port, buf, 5);
+	kfree(buf);
+
+	if (status != IUU_OPERATION_OK)
+		dbg("%s - vcc error status = %2x", __func__, status);
+	else
+		dbg("%s - vcc OK !", __func__);
+
+	return status;
+}
+
+/*
+ * Sysfs Attributes
+ */
+
+static ssize_t show_vcc_mode(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct usb_serial_port *port = to_usb_serial_port(dev);
+	struct iuu_private *priv = usb_get_serial_port_data(port);
+
+	return sprintf(buf, "%d\n", priv->vcc);
+}
+
+static ssize_t store_vcc_mode(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct usb_serial_port *port = to_usb_serial_port(dev);
+	struct iuu_private *priv = usb_get_serial_port_data(port);
+	unsigned long v;
+
+	if (strict_strtoul(buf, 10, &v)) {
+		dev_err(dev, "%s - vcc_mode: %s is not a unsigned long\n",
+				__func__, buf);
+		goto fail_store_vcc_mode;
+	}
+
+	dbg("%s: setting vcc_mode = %ld", __func__, v);
+
+	if ((v != 3) && (v != 5)) {
+		dev_err(dev, "%s - vcc_mode %ld is invalid\n", __func__, v);
+	} else {
+		iuu_vcc_set(port, v);
+		priv->vcc = v;
+	}
+fail_store_vcc_mode:
+	return count;
+}
+
+static DEVICE_ATTR(vcc_mode, S_IRUSR | S_IWUSR, show_vcc_mode,
+	store_vcc_mode);
+
+static int iuu_create_sysfs_attrs(struct usb_serial_port *port)
+{
+	dbg("%s", __func__);
+
+	return device_create_file(&port->dev, &dev_attr_vcc_mode);
+}
+
+static int iuu_remove_sysfs_attrs(struct usb_serial_port *port)
+{
+	dbg("%s", __func__);
+
+	device_remove_file(&port->dev, &dev_attr_vcc_mode);
+	return 0;
+}
+
+/*
+ * End Sysfs Attributes
+ */
+
 static struct usb_serial_driver iuu_device = {
 	.driver = {
 		   .owner = THIS_MODULE,
@@ -1194,6 +1277,8 @@ static struct usb_serial_driver iuu_device = {
 		   },
 	.id_table = id_table,
 	.num_ports = 1,
+	.port_probe = iuu_create_sysfs_attrs,
+	.port_remove = iuu_remove_sysfs_attrs,
 	.open = iuu_open,
 	.close = iuu_close,
 	.write = iuu_uart_write,
@@ -1201,6 +1286,7 @@ static struct usb_serial_driver iuu_device = {
 	.tiocmget = iuu_tiocmget,
 	.tiocmset = iuu_tiocmset,
 	.set_termios = iuu_set_termios,
+	.init_termios = iuu_init_termios,
 	.attach = iuu_startup,
 	.release = iuu_release,
 };
@@ -1242,14 +1328,19 @@ module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug enabled or not");
 
 module_param(xmas, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(xmas, "xmas color enabled or not");
+MODULE_PARM_DESC(xmas, "Xmas colors enabled or not");
 
 module_param(boost, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(boost, "overclock boost percent 100 to 500");
+MODULE_PARM_DESC(boost, "Card overclock boost (in percent 100-500)");
 
 module_param(clockmode, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(clockmode, "1=3Mhz579,2=3Mhz680,3=6Mhz");
+MODULE_PARM_DESC(clockmode, "Card clock mode (1=3.579 MHz, 2=3.680 MHz, "
+		"3=6 Mhz)");
 
 module_param(cdmode, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(cdmode, "Card detect mode 0=none, 1=CD, 2=!CD, 3=DSR, "
-		 "4=!DSR, 5=CTS, 6=!CTS, 7=RING, 8=!RING");
+MODULE_PARM_DESC(cdmode, "Card detect mode (0=none, 1=CD, 2=!CD, 3=DSR, "
+		 "4=!DSR, 5=CTS, 6=!CTS, 7=RING, 8=!RING)");
+
+module_param(vcc_default, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(vcc_default, "Set default VCC (either 3 for 3.3V or 5 "
+		"for 5V). Default to 5.");
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 2594b8743d3f..f8c4b07033ff 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1209,8 +1209,7 @@ static int keyspan_write_room(struct tty_struct *tty)
 }
 
 
-static int keyspan_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct keyspan_port_private 	*p_priv;
 	struct keyspan_serial_private 	*s_priv;
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index 3107ed15af64..30771e5b3973 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -36,8 +36,7 @@
 
 /* Function prototypes for Keyspan serial converter */
 static int  keyspan_open		(struct tty_struct *tty,
-					 struct usb_serial_port *port,
-					 struct file *filp);
+					 struct usb_serial_port *port);
 static void keyspan_close		(struct usb_serial_port *port);
 static void keyspan_dtr_rts		(struct usb_serial_port *port, int on);
 static int  keyspan_startup		(struct usb_serial *serial);
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index d0b12e40c2b1..257c16cc6b2a 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -681,7 +681,7 @@ static int keyspan_pda_carrier_raised(struct usb_serial_port *port)
 
 
 static int keyspan_pda_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+					struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	unsigned char room;
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 0f44bb8e8d4f..f7373371b137 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -38,7 +38,7 @@
  *   0.3a - implemented pools of write URBs
  *   0.3  - alpha version for public testing
  *   0.2  - TIOCMGET works, so autopilot(1) can be used!
- *   0.1  - can be used to to pilot-xfer -p /dev/ttyUSB0 -l
+ *   0.1  - can be used to do pilot-xfer -p /dev/ttyUSB0 -l
  *
  *   The driver skeleton is mainly based on mct_u232.c and various other
  *   pieces of code shamelessly copied from the drivers/usb/serial/ directory.
@@ -75,8 +75,7 @@ static int debug;
 static int  klsi_105_startup(struct usb_serial *serial);
 static void klsi_105_disconnect(struct usb_serial *serial);
 static void klsi_105_release(struct usb_serial *serial);
-static int  klsi_105_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void klsi_105_close(struct usb_serial_port *port);
 static int  klsi_105_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count);
@@ -358,8 +357,7 @@ static void klsi_105_release(struct usb_serial *serial)
 	}
 } /* klsi_105_release */
 
-static int  klsi_105_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct klsi_105_private *priv = usb_get_serial_port_data(port);
 	int retval = 0;
@@ -371,10 +369,6 @@ static int  klsi_105_open(struct tty_struct *tty,
 
 	dbg("%s port %d", __func__, port->number);
 
-	/* force low_latency on so that our tty_push actually forces
-	 * the data through
-	 * tty->low_latency = 1; */
-
 	/* Do a defined restart:
 	 * Set up sane default baud rate and send the 'READ_ON'
 	 * vendor command.
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 6db0e561f680..45ea694b3ae6 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -70,8 +70,7 @@ static int debug;
 /* Function prototypes */
 static int  kobil_startup(struct usb_serial *serial);
 static void kobil_release(struct usb_serial *serial);
-static int  kobil_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static int  kobil_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void kobil_close(struct usb_serial_port *port);
 static int  kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
 			 const unsigned char *buf, int count);
@@ -85,7 +84,7 @@ static void kobil_read_int_callback(struct urb *urb);
 static void kobil_write_callback(struct urb *purb);
 static void kobil_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
-
+static void kobil_init_termios(struct tty_struct *tty);
 
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_ADAPTER_B_PRODUCT_ID) },
@@ -120,6 +119,7 @@ static struct usb_serial_driver kobil_device = {
 	.release =		kobil_release,
 	.ioctl =		kobil_ioctl,
 	.set_termios =		kobil_set_termios,
+	.init_termios =		kobil_init_termios,
 	.tiocmget =		kobil_tiocmget,
 	.tiocmset =		kobil_tiocmset,
 	.open =			kobil_open,
@@ -210,9 +210,17 @@ static void kobil_release(struct usb_serial *serial)
 		kfree(usb_get_serial_port_data(serial->port[i]));
 }
 
+static void kobil_init_termios(struct tty_struct *tty)
+{
+	/* Default to echo off and other sane device settings */
+	tty->termios->c_lflag = 0;
+	tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN | XCASE);
+	tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF;
+	/* do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D) */
+	tty->termios->c_oflag &= ~ONLCR;
+}
 
-static int kobil_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int result = 0;
 	struct kobil_private *priv;
@@ -226,16 +234,6 @@ static int kobil_open(struct tty_struct *tty,
 	/* someone sets the dev to 0 if the close method has been called */
 	port->interrupt_in_urb->dev = port->serial->dev;
 
-	if (tty) {
-
-		/* Default to echo off and other sane device settings */
-		tty->termios->c_lflag = 0;
-		tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN |
-								 XCASE);
-		tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF;
-		/* do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D) */
-		tty->termios->c_oflag &= ~ONLCR;
-	}
 	/* allocate memory for transfer buffer */
 	transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL);
 	if (!transfer_buffer)
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index d8825e159aa5..ad4998bbf16f 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -93,8 +93,7 @@ static int debug;
  */
 static int  mct_u232_startup(struct usb_serial *serial);
 static void mct_u232_release(struct usb_serial *serial);
-static int  mct_u232_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static int  mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void mct_u232_close(struct usb_serial_port *port);
 static void mct_u232_dtr_rts(struct usb_serial_port *port, int on);
 static void mct_u232_read_int_callback(struct urb *urb);
@@ -421,8 +420,7 @@ static void mct_u232_release(struct usb_serial *serial)
 	}
 } /* mct_u232_release */
 
-static int  mct_u232_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int  mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
@@ -568,10 +566,13 @@ static void mct_u232_read_int_callback(struct urb *urb)
 	 * Work-a-round: handle the 'usual' bulk-in pipe here
 	 */
 	if (urb->transfer_buffer_length > 2) {
-		tty = tty_port_tty_get(&port->port);
 		if (urb->actual_length) {
-			tty_insert_flip_string(tty, data, urb->actual_length);
-			tty_flip_buffer_push(tty);
+			tty = tty_port_tty_get(&port->port);
+			if (tty) {
+				tty_insert_flip_string(tty, data,
+						urb->actual_length);
+				tty_flip_buffer_push(tty);
+			}
 			tty_kref_put(tty);
 		}
 		goto exit;
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index ccd4dd340d2c..763e32a44be0 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -85,7 +85,7 @@ static int debug;
 #define MOSCHIP_DEVICE_ID_7720		0x7720
 #define MOSCHIP_DEVICE_ID_7715		0x7715
 
-static struct usb_device_id moschip_port_id_table [] = {
+static struct usb_device_id moschip_port_id_table[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7720) },
 	{ } /* terminating entry */
 };
@@ -319,8 +319,7 @@ static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value,
 	return status;
 }
 
-static int mos7720_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial;
 	struct usb_serial_port *port0;
@@ -378,10 +377,14 @@ static int mos7720_open(struct tty_struct *tty,
 	 /* Initialize MCS7720 -- Write Init values to corresponding Registers
 	  *
 	  * Register Index
+	  * 0 : THR/RHR
 	  * 1 : IER
 	  * 2 : FCR
 	  * 3 : LCR
 	  * 4 : MCR
+	  * 5 : LSR
+	  * 6 : MSR
+	  * 7 : SPR
 	  *
 	  * 0x08 : SP1/2 Control Reg
 	  */
@@ -1250,20 +1253,88 @@ static void mos7720_set_termios(struct tty_struct *tty,
 static int get_lsr_info(struct tty_struct *tty,
 		struct moschip_port *mos7720_port, unsigned int __user *value)
 {
-	int count;
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned int result = 0;
+	unsigned char data = 0;
+	int port_number = port->number - port->serial->minor;
+	int count;
 
 	count = mos7720_chars_in_buffer(tty);
 	if (count == 0) {
-		dbg("%s -- Empty", __func__);
-		result = TIOCSER_TEMT;
+		send_mos_cmd(port->serial, MOS_READ, port_number,
+							UART_LSR, &data);
+		if ((data & (UART_LSR_TEMT | UART_LSR_THRE))
+					== (UART_LSR_TEMT | UART_LSR_THRE)) {
+			dbg("%s -- Empty", __func__);
+			result = TIOCSER_TEMT;
+		}
 	}
-
 	if (copy_to_user(value, &result, sizeof(int)))
 		return -EFAULT;
 	return 0;
 }
 
+static int mos7720_tiocmget(struct tty_struct *tty, struct file *file)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct moschip_port *mos7720_port = usb_get_serial_port_data(port);
+	unsigned int result = 0;
+	unsigned int mcr ;
+	unsigned int msr ;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	mcr = mos7720_port->shadowMCR;
+	msr = mos7720_port->shadowMSR;
+
+	result = ((mcr & UART_MCR_DTR)  ? TIOCM_DTR : 0)   /* 0x002 */
+	  | ((mcr & UART_MCR_RTS)   ? TIOCM_RTS : 0)   /* 0x004 */
+	  | ((msr & UART_MSR_CTS)   ? TIOCM_CTS : 0)   /* 0x020 */
+	  | ((msr & UART_MSR_DCD)   ? TIOCM_CAR : 0)   /* 0x040 */
+	  | ((msr & UART_MSR_RI)    ? TIOCM_RI :  0)   /* 0x080 */
+	  | ((msr & UART_MSR_DSR)   ? TIOCM_DSR : 0);  /* 0x100 */
+
+	dbg("%s -- %x", __func__, result);
+
+	return result;
+}
+
+static int mos7720_tiocmset(struct tty_struct *tty, struct file *file,
+					unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct moschip_port *mos7720_port = usb_get_serial_port_data(port);
+	unsigned int mcr ;
+	unsigned char lmcr;
+
+	dbg("%s - port %d", __func__, port->number);
+	dbg("he was at tiocmget");
+
+	mcr = mos7720_port->shadowMCR;
+
+	if (set & TIOCM_RTS)
+		mcr |= UART_MCR_RTS;
+	if (set & TIOCM_DTR)
+		mcr |= UART_MCR_DTR;
+	if (set & TIOCM_LOOP)
+		mcr |= UART_MCR_LOOP;
+
+	if (clear & TIOCM_RTS)
+		mcr &= ~UART_MCR_RTS;
+	if (clear & TIOCM_DTR)
+		mcr &= ~UART_MCR_DTR;
+	if (clear & TIOCM_LOOP)
+		mcr &= ~UART_MCR_LOOP;
+
+	mos7720_port->shadowMCR = mcr;
+	lmcr = mos7720_port->shadowMCR;
+
+	send_mos_cmd(port->serial, MOS_WRITE,
+		port->number - port->serial->minor, UART_MCR, &lmcr);
+
+	return 0;
+}
+
 static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
 			  unsigned int __user *value)
 {
@@ -1301,14 +1372,6 @@ static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
 			mcr &= ~UART_MCR_LOOP;
 		break;
 
-	case TIOCMSET:
-		/* turn off the RTS and DTR and LOOPBACK
-		 * and then only turn on what was asked to */
-		mcr &=  ~(UART_MCR_RTS | UART_MCR_DTR | UART_MCR_LOOP);
-		mcr |= ((arg & TIOCM_RTS) ? UART_MCR_RTS : 0);
-		mcr |= ((arg & TIOCM_DTR) ? UART_MCR_DTR : 0);
-		mcr |= ((arg & TIOCM_LOOP) ? UART_MCR_LOOP : 0);
-		break;
 	}
 
 	mos7720_port->shadowMCR = mcr;
@@ -1320,28 +1383,6 @@ static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
 	return 0;
 }
 
-static int get_modem_info(struct moschip_port *mos7720_port,
-			  unsigned int __user *value)
-{
-	unsigned int result = 0;
-	unsigned int msr = mos7720_port->shadowMSR;
-	unsigned int mcr = mos7720_port->shadowMCR;
-
-	result = ((mcr & UART_MCR_DTR)	? TIOCM_DTR: 0)	  /* 0x002 */
-		  | ((mcr & UART_MCR_RTS)	? TIOCM_RTS: 0)   /* 0x004 */
-		  | ((msr & UART_MSR_CTS)	? TIOCM_CTS: 0)   /* 0x020 */
-		  | ((msr & UART_MSR_DCD)	? TIOCM_CAR: 0)   /* 0x040 */
-		  | ((msr & UART_MSR_RI)	? TIOCM_RI:  0)   /* 0x080 */
-		  | ((msr & UART_MSR_DSR)	? TIOCM_DSR: 0);  /* 0x100 */
-
-
-	dbg("%s -- %x", __func__, result);
-
-	if (copy_to_user(value, &result, sizeof(int)))
-		return -EFAULT;
-	return 0;
-}
-
 static int get_serial_info(struct moschip_port *mos7720_port,
 			   struct serial_struct __user *retinfo)
 {
@@ -1392,17 +1433,11 @@ static int mos7720_ioctl(struct tty_struct *tty, struct file *file,
 	/* FIXME: These should be using the mode methods */
 	case TIOCMBIS:
 	case TIOCMBIC:
-	case TIOCMSET:
 		dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET",
 					__func__, port->number);
 		return set_modem_info(mos7720_port, cmd,
 				      (unsigned int __user *)arg);
 
-	case TIOCMGET:
-		dbg("%s (%d) TIOCMGET", __func__,  port->number);
-		return get_modem_info(mos7720_port,
-				      (unsigned int __user *)arg);
-
 	case TIOCGSERIAL:
 		dbg("%s (%d) TIOCGSERIAL", __func__,  port->number);
 		return get_serial_info(mos7720_port,
@@ -1557,6 +1592,8 @@ static struct usb_serial_driver moschip7720_2port_driver = {
 	.attach			= mos7720_startup,
 	.release		= mos7720_release,
 	.ioctl			= mos7720_ioctl,
+	.tiocmget		= mos7720_tiocmget,
+	.tiocmset		= mos7720_tiocmset,
 	.set_termios		= mos7720_set_termios,
 	.write			= mos7720_write,
 	.write_room		= mos7720_write_room,
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 270009afdf77..f11abf52be7d 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -824,8 +824,7 @@ static int mos7840_serial_probe(struct usb_serial *serial,
  *	Otherwise we return a negative error number.
  *****************************************************************************/
 
-static int mos7840_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int response;
 	int j;
@@ -2134,106 +2133,6 @@ static int mos7840_get_lsr_info(struct tty_struct *tty,
 }
 
 /*****************************************************************************
- * mos7840_set_modem_info
- *      function to set modem info
- *****************************************************************************/
-
-/* FIXME: Should be using the model control hooks */
-
-static int mos7840_set_modem_info(struct moschip_port *mos7840_port,
-				  unsigned int cmd, unsigned int __user *value)
-{
-	unsigned int mcr;
-	unsigned int arg;
-	__u16 Data;
-	int status;
-	struct usb_serial_port *port;
-
-	if (mos7840_port == NULL)
-		return -1;
-
-	port = (struct usb_serial_port *)mos7840_port->port;
-	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Invalid port");
-		return -1;
-	}
-
-	mcr = mos7840_port->shadowMCR;
-
-	if (copy_from_user(&arg, value, sizeof(int)))
-		return -EFAULT;
-
-	switch (cmd) {
-	case TIOCMBIS:
-		if (arg & TIOCM_RTS)
-			mcr |= MCR_RTS;
-		if (arg & TIOCM_DTR)
-			mcr |= MCR_RTS;
-		if (arg & TIOCM_LOOP)
-			mcr |= MCR_LOOPBACK;
-		break;
-
-	case TIOCMBIC:
-		if (arg & TIOCM_RTS)
-			mcr &= ~MCR_RTS;
-		if (arg & TIOCM_DTR)
-			mcr &= ~MCR_RTS;
-		if (arg & TIOCM_LOOP)
-			mcr &= ~MCR_LOOPBACK;
-		break;
-
-	case TIOCMSET:
-		/* turn off the RTS and DTR and LOOPBACK
-		 * and then only turn on what was asked to */
-		mcr &= ~(MCR_RTS | MCR_DTR | MCR_LOOPBACK);
-		mcr |= ((arg & TIOCM_RTS) ? MCR_RTS : 0);
-		mcr |= ((arg & TIOCM_DTR) ? MCR_DTR : 0);
-		mcr |= ((arg & TIOCM_LOOP) ? MCR_LOOPBACK : 0);
-		break;
-	}
-
-	lock_kernel();
-	mos7840_port->shadowMCR = mcr;
-
-	Data = mos7840_port->shadowMCR;
-	status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-	unlock_kernel();
-	if (status < 0) {
-		dbg("setting MODEM_CONTROL_REGISTER Failed");
-		return -1;
-	}
-
-	return 0;
-}
-
-/*****************************************************************************
- * mos7840_get_modem_info
- *      function to get modem info
- *****************************************************************************/
-
-static int mos7840_get_modem_info(struct moschip_port *mos7840_port,
-				  unsigned int __user *value)
-{
-	unsigned int result = 0;
-	__u16 msr;
-	unsigned int mcr = mos7840_port->shadowMCR;
-        mos7840_get_uart_reg(mos7840_port->port,
-						MODEM_STATUS_REGISTER, &msr);
-	result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)	/* 0x002 */
-	    |((mcr & MCR_RTS) ? TIOCM_RTS : 0)	/* 0x004 */
-	    |((msr & MOS7840_MSR_CTS) ? TIOCM_CTS : 0)	/* 0x020 */
-	    |((msr & MOS7840_MSR_CD) ? TIOCM_CAR : 0)	/* 0x040 */
-	    |((msr & MOS7840_MSR_RI) ? TIOCM_RI : 0)	/* 0x080 */
-	    |((msr & MOS7840_MSR_DSR) ? TIOCM_DSR : 0);	/* 0x100 */
-
-	dbg("%s -- %x", __func__, result);
-
-	if (copy_to_user(value, &result, sizeof(int)))
-		return -EFAULT;
-	return 0;
-}
-
-/*****************************************************************************
  * mos7840_get_serial_info
  *      function to get information about serial port
  *****************************************************************************/
@@ -2281,7 +2180,6 @@ static int mos7840_ioctl(struct tty_struct *tty, struct file *file,
 	struct async_icount cnow;
 	struct async_icount cprev;
 	struct serial_icounter_struct icount;
-	int mosret = 0;
 
 	if (mos7840_port_paranoia_check(port, __func__)) {
 		dbg("%s", "Invalid port");
@@ -2303,20 +2201,6 @@ static int mos7840_ioctl(struct tty_struct *tty, struct file *file,
 		return mos7840_get_lsr_info(tty, argp);
 		return 0;
 
-	/* FIXME: use the modem hooks and remove this */
-	case TIOCMBIS:
-	case TIOCMBIC:
-	case TIOCMSET:
-		dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __func__,
-		    port->number);
-		mosret =
-		    mos7840_set_modem_info(mos7840_port, cmd, argp);
-		return mosret;
-
-	case TIOCMGET:
-		dbg("%s (%d) TIOCMGET", __func__, port->number);
-		return mos7840_get_modem_info(mos7840_port, argp);
-
 	case TIOCGSERIAL:
 		dbg("%s (%d) TIOCGSERIAL", __func__, port->number);
 		return mos7840_get_serial_info(mos7840_port, argp);
diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c
index b66b71ccd12b..99bd00f5188a 100644
--- a/drivers/usb/serial/moto_modem.c
+++ b/drivers/usb/serial/moto_modem.c
@@ -8,7 +8,7 @@
  *  published by the Free Software Foundation.
  *
  * {sigh}
- * Mororola should be using the CDC ACM USB spec, but instead
+ * Motorola should be using the CDC ACM USB spec, but instead
  * they try to just "do their own thing"...  This driver should handle a
  * few phones in which a basic "dumb serial connection" is needed to be
  * able to get a connection through to them.
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index f5f3751a888c..5ceaa4c6be09 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -80,8 +80,7 @@ exit:
 			__func__, result);
 }
 
-static int navman_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int navman_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int result = 0;
 
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 56857ddbd70b..062265038bf0 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -64,8 +64,7 @@ static int debug;
 #define BT_IGNITIONPRO_ID	0x2000
 
 /* function prototypes */
-static int  omninet_open(struct tty_struct *tty, struct usb_serial_port *port,
-							struct file *filp);
+static int  omninet_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void omninet_close(struct usb_serial_port *port);
 static void omninet_read_bulk_callback(struct urb *urb);
 static void omninet_write_bulk_callback(struct urb *urb);
@@ -163,8 +162,7 @@ static int omninet_attach(struct usb_serial *serial)
 	return 0;
 }
 
-static int omninet_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial	*serial = port->serial;
 	struct usb_serial_port	*wport;
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 336bba79ad32..1085a577c5c1 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -144,8 +144,7 @@ exit:
 	spin_unlock(&priv->lock);
 }
 
-static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port,
-			struct file *filp)
+static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct opticon_private *priv = usb_get_serial_data(port->serial);
 	unsigned long flags;
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index c784ddbe7b61..f66e39883218 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -45,8 +45,7 @@
 /* Function prototypes */
 static int  option_probe(struct usb_serial *serial,
 			const struct usb_device_id *id);
-static int  option_open(struct tty_struct *tty, struct usb_serial_port *port,
-							struct file *filp);
+static int  option_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void option_close(struct usb_serial_port *port);
 static void option_dtr_rts(struct usb_serial_port *port, int on);
 
@@ -292,6 +291,7 @@ static int  option_resume(struct usb_serial *serial);
 
 #define TELIT_VENDOR_ID				0x1bc7
 #define TELIT_PRODUCT_UC864E			0x1003
+#define TELIT_PRODUCT_UC864G			0x1004
 
 /* ZTE PRODUCTS */
 #define ZTE_VENDOR_ID				0x19d2
@@ -300,6 +300,7 @@ static int  option_resume(struct usb_serial *serial);
 #define ZTE_PRODUCT_MF626			0x0031
 #define ZTE_PRODUCT_CDMA_TECH			0xfffe
 #define ZTE_PRODUCT_AC8710			0xfff1
+#define ZTE_PRODUCT_AC2726			0xfff5
 
 #define BENQ_VENDOR_ID				0x04a5
 #define BENQ_PRODUCT_H10			0x4068
@@ -503,6 +504,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
 	{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864G) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0003, 0xff, 0xff, 0xff) },
@@ -572,6 +574,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
 	{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
 	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) },
@@ -593,6 +596,7 @@ static struct usb_driver option_driver = {
 #ifdef CONFIG_PM
 	.suspend    = usb_serial_suspend,
 	.resume     = usb_serial_resume,
+	.supports_autosuspend =	1,
 #endif
 	.id_table   = option_ids,
 	.no_dynamic_id = 	1,
@@ -640,6 +644,12 @@ static int debug;
 #define IN_BUFLEN 4096
 #define OUT_BUFLEN 4096
 
+struct option_intf_private {
+	spinlock_t susp_lock;
+	unsigned int suspended:1;
+	int in_flight;
+};
+
 struct option_port_private {
 	/* Input endpoints and buffer for this port */
 	struct urb *in_urbs[N_IN_URB];
@@ -648,6 +658,8 @@ struct option_port_private {
 	struct urb *out_urbs[N_OUT_URB];
 	u8 *out_buffer[N_OUT_URB];
 	unsigned long out_busy;		/* Bit vector of URBs in use */
+	int opened;
+	struct usb_anchor delayed;
 
 	/* Settings for the port */
 	int rts_state;	/* Handshaking pins (outputs) */
@@ -694,12 +706,17 @@ module_exit(option_exit);
 static int option_probe(struct usb_serial *serial,
 			const struct usb_device_id *id)
 {
+	struct option_intf_private *data;
 	/* D-Link DWM 652 still exposes CD-Rom emulation interface in modem mode */
 	if (serial->dev->descriptor.idVendor == DLINK_VENDOR_ID &&
 		serial->dev->descriptor.idProduct == DLINK_PRODUCT_DWM_652 &&
 		serial->interface->cur_altsetting->desc.bInterfaceClass == 0x8)
 		return -ENODEV;
 
+	data = serial->private = kzalloc(sizeof(struct option_intf_private), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+	spin_lock_init(&data->susp_lock);
 	return 0;
 }
 
@@ -756,12 +773,15 @@ static int option_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count)
 {
 	struct option_port_private *portdata;
+	struct option_intf_private *intfdata;
 	int i;
 	int left, todo;
 	struct urb *this_urb = NULL; /* spurious */
 	int err;
+	unsigned long flags;
 
 	portdata = usb_get_serial_port_data(port);
+	intfdata = port->serial->private;
 
 	dbg("%s: write (%d chars)", __func__, count);
 
@@ -783,17 +803,33 @@ static int option_write(struct tty_struct *tty, struct usb_serial_port *port,
 		dbg("%s: endpoint %d buf %d", __func__,
 			usb_pipeendpoint(this_urb->pipe), i);
 
+		err = usb_autopm_get_interface_async(port->serial->interface);
+		if (err < 0)
+			break;
+
 		/* send the data */
 		memcpy(this_urb->transfer_buffer, buf, todo);
 		this_urb->transfer_buffer_length = todo;
 
-		err = usb_submit_urb(this_urb, GFP_ATOMIC);
-		if (err) {
-			dbg("usb_submit_urb %p (write bulk) failed "
-				"(%d)", this_urb, err);
-			clear_bit(i, &portdata->out_busy);
-			continue;
+		spin_lock_irqsave(&intfdata->susp_lock, flags);
+		if (intfdata->suspended) {
+			usb_anchor_urb(this_urb, &portdata->delayed);
+			spin_unlock_irqrestore(&intfdata->susp_lock, flags);
+		} else {
+			intfdata->in_flight++;
+			spin_unlock_irqrestore(&intfdata->susp_lock, flags);
+			err = usb_submit_urb(this_urb, GFP_ATOMIC);
+			if (err) {
+				dbg("usb_submit_urb %p (write bulk) failed "
+					"(%d)", this_urb, err);
+				clear_bit(i, &portdata->out_busy);
+				spin_lock_irqsave(&intfdata->susp_lock, flags);
+				intfdata->in_flight--;
+				spin_unlock_irqrestore(&intfdata->susp_lock, flags);
+				continue;
+			}
 		}
+
 		portdata->tx_start_time[i] = jiffies;
 		buf += todo;
 		left -= todo;
@@ -837,7 +873,10 @@ static void option_indat_callback(struct urb *urb)
 			if (err)
 				printk(KERN_ERR "%s: resubmit read urb failed. "
 					"(%d)", __func__, err);
+			else
+				usb_mark_last_busy(port->serial->dev);
 		}
+
 	}
 	return;
 }
@@ -846,15 +885,21 @@ static void option_outdat_callback(struct urb *urb)
 {
 	struct usb_serial_port *port;
 	struct option_port_private *portdata;
+	struct option_intf_private *intfdata;
 	int i;
 
 	dbg("%s", __func__);
 
 	port =  urb->context;
+	intfdata = port->serial->private;
 
 	usb_serial_port_softint(port);
-
+	usb_autopm_put_interface_async(port->serial->interface);
 	portdata = usb_get_serial_port_data(port);
+	spin_lock(&intfdata->susp_lock);
+	intfdata->in_flight--;
+	spin_unlock(&intfdata->susp_lock);
+
 	for (i = 0; i < N_OUT_URB; ++i) {
 		if (portdata->out_urbs[i] == urb) {
 			smp_mb__before_clear_bit();
@@ -961,14 +1006,16 @@ static int option_chars_in_buffer(struct tty_struct *tty)
 	return data_len;
 }
 
-static int option_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int option_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct option_port_private *portdata;
+	struct option_intf_private *intfdata;
+	struct usb_serial *serial = port->serial;
 	int i, err;
 	struct urb *urb;
 
 	portdata = usb_get_serial_port_data(port);
+	intfdata = serial->private;
 
 	dbg("%s", __func__);
 
@@ -987,6 +1034,12 @@ static int option_open(struct tty_struct *tty,
 
 	option_send_setup(port);
 
+	serial->interface->needs_remote_wakeup = 1;
+	spin_lock_irq(&intfdata->susp_lock);
+	portdata->opened = 1;
+	spin_unlock_irq(&intfdata->susp_lock);
+	usb_autopm_put_interface(serial->interface);
+
 	return 0;
 }
 
@@ -1011,16 +1064,23 @@ static void option_close(struct usb_serial_port *port)
 	int i;
 	struct usb_serial *serial = port->serial;
 	struct option_port_private *portdata;
+	struct option_intf_private *intfdata = port->serial->private;
 
 	dbg("%s", __func__);
 	portdata = usb_get_serial_port_data(port);
 
 	if (serial->dev) {
 		/* Stop reading/writing urbs */
+		spin_lock_irq(&intfdata->susp_lock);
+		portdata->opened = 0;
+		spin_unlock_irq(&intfdata->susp_lock);
+
 		for (i = 0; i < N_IN_URB; i++)
 			usb_kill_urb(portdata->in_urbs[i]);
 		for (i = 0; i < N_OUT_URB; i++)
 			usb_kill_urb(portdata->out_urbs[i]);
+		usb_autopm_get_interface(serial->interface);
+		serial->interface->needs_remote_wakeup = 0;
 	}
 }
 
@@ -1125,6 +1185,7 @@ static int option_startup(struct usb_serial *serial)
 					__func__, i);
 			return 1;
 		}
+		init_usb_anchor(&portdata->delayed);
 
 		for (j = 0; j < N_IN_URB; j++) {
 			buffer = (u8 *)__get_free_page(GFP_KERNEL);
@@ -1227,18 +1288,52 @@ static void option_release(struct usb_serial *serial)
 #ifdef CONFIG_PM
 static int option_suspend(struct usb_serial *serial, pm_message_t message)
 {
+	struct option_intf_private *intfdata = serial->private;
+	int b;
+
 	dbg("%s entered", __func__);
+
+	if (serial->dev->auto_pm) {
+		spin_lock_irq(&intfdata->susp_lock);
+		b = intfdata->in_flight;
+		spin_unlock_irq(&intfdata->susp_lock);
+
+		if (b)
+			return -EBUSY;
+	}
+
+	spin_lock_irq(&intfdata->susp_lock);
+	intfdata->suspended = 1;
+	spin_unlock_irq(&intfdata->susp_lock);
 	stop_read_write_urbs(serial);
 
 	return 0;
 }
 
+static void play_delayed(struct usb_serial_port *port)
+{
+	struct option_intf_private *data;
+	struct option_port_private *portdata;
+	struct urb *urb;
+	int err;
+
+	portdata = usb_get_serial_port_data(port);
+	data = port->serial->private;
+	while ((urb = usb_get_from_anchor(&portdata->delayed))) {
+		err = usb_submit_urb(urb, GFP_ATOMIC);
+		if (!err)
+			data->in_flight++;
+	}
+}
+
 static int option_resume(struct usb_serial *serial)
 {
-	int err, i, j;
+	int i, j;
 	struct usb_serial_port *port;
-	struct urb *urb;
+	struct option_intf_private *intfdata = serial->private;
 	struct option_port_private *portdata;
+	struct urb *urb;
+	int err = 0;
 
 	dbg("%s entered", __func__);
 	/* get the interrupt URBs resubmitted unconditionally */
@@ -1253,7 +1348,7 @@ static int option_resume(struct usb_serial *serial)
 		if (err < 0) {
 			err("%s: Error %d for interrupt URB of port%d",
 				 __func__, err, i);
-			return err;
+			goto err_out;
 		}
 	}
 
@@ -1261,27 +1356,32 @@ static int option_resume(struct usb_serial *serial)
 		/* walk all ports */
 		port = serial->port[i];
 		portdata = usb_get_serial_port_data(port);
-		mutex_lock(&port->mutex);
 
 		/* skip closed ports */
-		if (!port->port.count) {
-			mutex_unlock(&port->mutex);
+		spin_lock_irq(&intfdata->susp_lock);
+		if (!portdata->opened) {
+			spin_unlock_irq(&intfdata->susp_lock);
 			continue;
 		}
 
 		for (j = 0; j < N_IN_URB; j++) {
 			urb = portdata->in_urbs[j];
-			err = usb_submit_urb(urb, GFP_NOIO);
+			err = usb_submit_urb(urb, GFP_ATOMIC);
 			if (err < 0) {
-				mutex_unlock(&port->mutex);
 				err("%s: Error %d for bulk URB %d",
 					 __func__, err, i);
-				return err;
+				spin_unlock_irq(&intfdata->susp_lock);
+				goto err_out;
 			}
 		}
-		mutex_unlock(&port->mutex);
+		play_delayed(port);
+		spin_unlock_irq(&intfdata->susp_lock);
 	}
-	return 0;
+	spin_lock_irq(&intfdata->susp_lock);
+	intfdata->suspended = 0;
+	spin_unlock_irq(&intfdata->susp_lock);
+err_out:
+	return err;
 }
 #endif
 
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 3cece27325e7..0f4a70ce3823 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -141,11 +141,11 @@ struct oti6858_control_pkt {
 	  && ((a)->frame_fmt == (priv)->pending_setup.frame_fmt))
 
 /* function prototypes */
-static int oti6858_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void oti6858_close(struct usb_serial_port *port);
 static void oti6858_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
+static void oti6858_init_termios(struct tty_struct *tty);
 static int oti6858_ioctl(struct tty_struct *tty, struct file *file,
 			unsigned int cmd, unsigned long arg);
 static void oti6858_read_int_callback(struct urb *urb);
@@ -186,6 +186,7 @@ static struct usb_serial_driver oti6858_device = {
 	.write =		oti6858_write,
 	.ioctl =		oti6858_ioctl,
 	.set_termios =		oti6858_set_termios,
+	.init_termios = 	oti6858_init_termios,
 	.tiocmget =		oti6858_tiocmget,
 	.tiocmset =		oti6858_tiocmset,
 	.read_bulk_callback =	oti6858_read_bulk_callback,
@@ -206,7 +207,6 @@ struct oti6858_private {
 	struct {
 		u8 read_urb_in_use;
 		u8 write_urb_in_use;
-		u8 termios_initialized;
 	} flags;
 	struct delayed_work delayed_write_work;
 
@@ -447,6 +447,14 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty)
 	return chars;
 }
 
+static void oti6858_init_termios(struct tty_struct *tty)
+{
+	*(tty->termios) = tty_std_termios;
+	tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
+	tty->termios->c_ispeed = 38400;
+	tty->termios->c_ospeed = 38400;
+}
+
 static void oti6858_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
@@ -464,16 +472,6 @@ static void oti6858_set_termios(struct tty_struct *tty,
 		return;
 	}
 
-	spin_lock_irqsave(&priv->lock, flags);
-	if (!priv->flags.termios_initialized) {
-		*(tty->termios) = tty_std_termios;
-		tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
-		tty->termios->c_ispeed = 38400;
-		tty->termios->c_ospeed = 38400;
-		priv->flags.termios_initialized = 1;
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	cflag = tty->termios->c_cflag;
 
 	spin_lock_irqsave(&priv->lock, flags);
@@ -566,8 +564,7 @@ static void oti6858_set_termios(struct tty_struct *tty,
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
-static int oti6858_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct oti6858_private *priv = usb_get_serial_port_data(port);
 	struct ktermios tmp_termios;
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 3e86815b2705..1128e01525b1 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -96,6 +96,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
 	{ USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
 	{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
+	{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 
@@ -527,6 +528,12 @@ static void pl2303_set_termios(struct tty_struct *tty,
 	int baud;
 	int i;
 	u8 control;
+	const int baud_sup[] = { 75, 150, 300, 600, 1200, 1800, 2400, 3600,
+	                         4800, 7200, 9600, 14400, 19200, 28800, 38400,
+	                         57600, 115200, 230400, 460800, 614400,
+	                         921600, 1228800, 2457600, 3000000, 6000000 };
+	int baud_floor, baud_ceil;
+	int k;
 
 	dbg("%s -  port %d", __func__, port->number);
 
@@ -572,9 +579,39 @@ static void pl2303_set_termios(struct tty_struct *tty,
 		dbg("%s - data bits = %d", __func__, buf[6]);
 	}
 
+	/* For reference buf[0]:buf[3] baud rate value */
+	/* NOTE: Only the values defined in baud_sup are supported !
+	 *       => if unsupported values are set, the PL2303 seems to use
+	 *          9600 baud (at least my PL2303X always does)
+	 */
 	baud = tty_get_baud_rate(tty);
-	dbg("%s - baud = %d", __func__, baud);
+	dbg("%s - baud requested = %d", __func__, baud);
 	if (baud) {
+		/* Set baudrate to nearest supported value */
+		for (k=0; k<ARRAY_SIZE(baud_sup); k++) {
+			if (baud_sup[k] / baud) {
+				baud_ceil = baud_sup[k];
+				if (k==0) {
+					baud = baud_ceil;
+				} else {
+					baud_floor = baud_sup[k-1];
+					if ((baud_ceil % baud)
+					    > (baud % baud_floor))
+						baud = baud_floor;
+					else
+						baud = baud_ceil;
+				}
+				break;
+			}
+		}
+		if (baud > 1228800) {
+			/* type_0, type_1 only support up to 1228800 baud */
+			if (priv->type != HX)
+				baud = 1228800;
+			else if (baud > 6000000)
+				baud = 6000000;
+		}
+		dbg("%s - baud set = %d", __func__, baud);
 		buf[0] = baud & 0xff;
 		buf[1] = (baud >> 8) & 0xff;
 		buf[2] = (baud >> 16) & 0xff;
@@ -585,8 +622,16 @@ static void pl2303_set_termios(struct tty_struct *tty,
 	/* For reference buf[4]=1 is 1.5 stop bits */
 	/* For reference buf[4]=2 is 2 stop bits */
 	if (cflag & CSTOPB) {
-		buf[4] = 2;
-		dbg("%s - stop bits = 2", __func__);
+		/* NOTE: Comply with "real" UARTs / RS232:
+		 *       use 1.5 instead of 2 stop bits with 5 data bits
+		 */
+		if ((cflag & CSIZE) == CS5) {
+			buf[4] = 1;
+			dbg("%s - stop bits = 1.5", __func__);
+		} else {
+			buf[4] = 2;
+			dbg("%s - stop bits = 2", __func__);
+		}
 	} else {
 		buf[4] = 0;
 		dbg("%s - stop bits = 1", __func__);
@@ -599,11 +644,21 @@ static void pl2303_set_termios(struct tty_struct *tty,
 		/* For reference buf[5]=3 is mark parity */
 		/* For reference buf[5]=4 is space parity */
 		if (cflag & PARODD) {
-			buf[5] = 1;
-			dbg("%s - parity = odd", __func__);
+			if (cflag & CMSPAR) {
+				buf[5] = 3;
+				dbg("%s - parity = mark", __func__);
+			} else {
+				buf[5] = 1;
+				dbg("%s - parity = odd", __func__);
+			}
 		} else {
-			buf[5] = 2;
-			dbg("%s - parity = even", __func__);
+			if (cflag & CMSPAR) {
+				buf[5] = 4;
+				dbg("%s - parity = space", __func__);
+			} else {
+				buf[5] = 2;
+				dbg("%s - parity = even", __func__);
+			}
 		}
 	} else {
 		buf[5] = 0;
@@ -647,7 +702,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
 		pl2303_vendor_write(0x0, 0x0, serial);
 	}
 
-	/* FIXME: Need to read back resulting baud rate */
+	/* Save resulting baud rate */
 	if (baud)
 		tty_encode_baud_rate(tty, baud, baud);
 
@@ -691,8 +746,7 @@ static void pl2303_close(struct usb_serial_port *port)
 
 }
 
-static int pl2303_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct ktermios tmp_termios;
 	struct usb_serial *serial = port->serial;
@@ -714,8 +768,6 @@ static int pl2303_open(struct tty_struct *tty,
 	if (tty)
 		pl2303_set_termios(tty, port, &tmp_termios);
 
-	/* FIXME: need to assert RTS and DTR if CRTSCTS off */
-
 	dbg("%s - submitting read urb", __func__);
 	port->read_urb->dev = serial->dev;
 	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index ee9505e1dd92..d640dc951568 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -130,3 +130,7 @@
 /* Sony, USB data cable for CMD-Jxx mobile phones */
 #define SONY_VENDOR_ID		0x054c
 #define SONY_QN3USB_PRODUCT_ID	0x0437
+
+/* Sanwa KB-USB2 multimeter cable (ID: 11ad:0001) */
+#define SANWA_VENDOR_ID		0x11ad
+#define SANWA_PRODUCT_ID	0x0001
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index f48d05e0acc1..8c075b2416bb 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -51,6 +51,12 @@ struct sierra_iface_info {
 	const u8  *ifaceinfo;	/* pointer to the array holding the numbers */
 };
 
+struct sierra_intf_private {
+	spinlock_t susp_lock;
+	unsigned int suspended:1;
+	int in_flight;
+};
+
 static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
 {
 	int result;
@@ -144,6 +150,7 @@ static int sierra_probe(struct usb_serial *serial,
 {
 	int result = 0;
 	struct usb_device *udev;
+	struct sierra_intf_private *data;
 	u8 ifnum;
 
 	udev = serial->dev;
@@ -171,6 +178,11 @@ static int sierra_probe(struct usb_serial *serial,
 		return -ENODEV;
 	}
 
+	data = serial->private = kzalloc(sizeof(struct sierra_intf_private), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+	spin_lock_init(&data->susp_lock);
+
 	return result;
 }
 
@@ -261,13 +273,18 @@ static struct usb_driver sierra_driver = {
 	.name       = "sierra",
 	.probe      = usb_serial_probe,
 	.disconnect = usb_serial_disconnect,
+	.suspend    = usb_serial_suspend,
+	.resume     = usb_serial_resume,
 	.id_table   = id_table,
 	.no_dynamic_id = 	1,
+	.supports_autosuspend =	1,
 };
 
 struct sierra_port_private {
 	spinlock_t lock;	/* lock the structure */
 	int outstanding_urbs;	/* number of out urbs in flight */
+	struct usb_anchor active;
+	struct usb_anchor delayed;
 
 	/* Input endpoints and buffers for this port */
 	struct urb *in_urbs[N_IN_URB];
@@ -279,6 +296,8 @@ struct sierra_port_private {
 	int dsr_state;
 	int dcd_state;
 	int ri_state;
+
+	unsigned int opened:1;
 };
 
 static int sierra_send_setup(struct usb_serial_port *port)
@@ -390,21 +409,25 @@ static void sierra_outdat_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 	struct sierra_port_private *portdata = usb_get_serial_port_data(port);
+	struct sierra_intf_private *intfdata;
 	int status = urb->status;
-	unsigned long flags;
 
 	dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number);
+	intfdata = port->serial->private;
 
 	/* free up the transfer buffer, as usb_free_urb() does not do this */
 	kfree(urb->transfer_buffer);
-
+	usb_autopm_put_interface_async(port->serial->interface);
 	if (status)
 		dev_dbg(&port->dev, "%s - nonzero write bulk status "
 		    "received: %d\n", __func__, status);
 
-	spin_lock_irqsave(&portdata->lock, flags);
+	spin_lock(&portdata->lock);
 	--portdata->outstanding_urbs;
-	spin_unlock_irqrestore(&portdata->lock, flags);
+	spin_unlock(&portdata->lock);
+	spin_lock(&intfdata->susp_lock);
+	--intfdata->in_flight;
+	spin_unlock(&intfdata->susp_lock);
 
 	usb_serial_port_softint(port);
 }
@@ -414,6 +437,7 @@ static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count)
 {
 	struct sierra_port_private *portdata = usb_get_serial_port_data(port);
+	struct sierra_intf_private *intfdata;
 	struct usb_serial *serial = port->serial;
 	unsigned long flags;
 	unsigned char *buffer;
@@ -426,9 +450,9 @@ static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port,
 		return 0;
 
 	portdata = usb_get_serial_port_data(port);
+	intfdata = serial->private;
 
 	dev_dbg(&port->dev, "%s: write (%zd bytes)\n", __func__, writesize);
-
 	spin_lock_irqsave(&portdata->lock, flags);
 	dev_dbg(&port->dev, "%s - outstanding_urbs: %d\n", __func__,
 		portdata->outstanding_urbs);
@@ -442,6 +466,14 @@ static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port,
 		portdata->outstanding_urbs);
 	spin_unlock_irqrestore(&portdata->lock, flags);
 
+	retval = usb_autopm_get_interface_async(serial->interface);
+	if (retval < 0) {
+		spin_lock_irqsave(&portdata->lock, flags);
+		portdata->outstanding_urbs--;
+		spin_unlock_irqrestore(&portdata->lock, flags);
+		goto error_simple;
+	}
+
 	buffer = kmalloc(writesize, GFP_ATOMIC);
 	if (!buffer) {
 		dev_err(&port->dev, "out of memory\n");
@@ -468,14 +500,29 @@ static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port,
 	/* Handle the need to send a zero length packet */
 	urb->transfer_flags |= URB_ZERO_PACKET;
 
+	spin_lock_irqsave(&intfdata->susp_lock, flags);
+
+	if (intfdata->suspended) {
+		usb_anchor_urb(urb, &portdata->delayed);
+		spin_unlock_irqrestore(&intfdata->susp_lock, flags);
+		goto skip_power;
+	} else {
+		usb_anchor_urb(urb, &portdata->active);
+	}
 	/* send it down the pipe */
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval) {
+		usb_unanchor_urb(urb);
+		spin_unlock_irqrestore(&intfdata->susp_lock, flags);
 		dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed "
 			"with status = %d\n", __func__, retval);
 		goto error;
+	} else {
+		intfdata->in_flight++;
+		spin_unlock_irqrestore(&intfdata->susp_lock, flags);
 	}
 
+skip_power:
 	/* we are done with this urb, so let the host driver
 	 * really free it when it is finished with it */
 	usb_free_urb(urb);
@@ -491,6 +538,8 @@ error_no_buffer:
 	dev_dbg(&port->dev, "%s - 2. outstanding_urbs: %d\n", __func__,
 		portdata->outstanding_urbs);
 	spin_unlock_irqrestore(&portdata->lock, flags);
+	usb_autopm_put_interface_async(serial->interface);
+error_simple:
 	return retval;
 }
 
@@ -530,6 +579,7 @@ static void sierra_indat_callback(struct urb *urb)
 
 	/* Resubmit urb so we continue receiving */
 	if (port->port.count && status != -ESHUTDOWN && status != -EPERM) {
+		usb_mark_last_busy(port->serial->dev);
 		err = usb_submit_urb(urb, GFP_ATOMIC);
 		if (err)
 			dev_err(&port->dev, "resubmit read urb failed."
@@ -591,6 +641,7 @@ static void sierra_instat_callback(struct urb *urb)
 
 	/* Resubmit urb so we continue receiving IRQ data */
 	if (port->port.count && status != -ESHUTDOWN && status != -ENOENT) {
+		usb_mark_last_busy(serial->dev);
 		urb->dev = serial->dev;
 		err = usb_submit_urb(urb, GFP_ATOMIC);
 		if (err)
@@ -711,6 +762,8 @@ static void sierra_close(struct usb_serial_port *port)
 	int i;
 	struct usb_serial *serial = port->serial;
 	struct sierra_port_private *portdata;
+	struct sierra_intf_private *intfdata = port->serial->private;
+
 
 	dev_dbg(&port->dev, "%s\n", __func__);
 	portdata = usb_get_serial_port_data(port);
@@ -723,6 +776,10 @@ static void sierra_close(struct usb_serial_port *port)
 		if (!serial->disconnected)
 			sierra_send_setup(port);
 		mutex_unlock(&serial->disc_mutex);
+		spin_lock_irq(&intfdata->susp_lock);
+		portdata->opened = 0;
+		spin_unlock_irq(&intfdata->susp_lock);
+
 
 		/* Stop reading urbs */
 		sierra_stop_rx_urbs(port);
@@ -731,14 +788,16 @@ static void sierra_close(struct usb_serial_port *port)
 			sierra_release_urb(portdata->in_urbs[i]);
 			portdata->in_urbs[i] = NULL;
 		}
+		usb_autopm_get_interface(serial->interface);
+		serial->interface->needs_remote_wakeup = 0;
 	}
 }
 
-static int sierra_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct sierra_port_private *portdata;
 	struct usb_serial *serial = port->serial;
+	struct sierra_intf_private *intfdata = serial->private;
 	int i;
 	int err;
 	int endpoint;
@@ -772,6 +831,12 @@ static int sierra_open(struct tty_struct *tty,
 	}
 	sierra_send_setup(port);
 
+	serial->interface->needs_remote_wakeup = 1;
+	spin_lock_irq(&intfdata->susp_lock);
+	portdata->opened = 1;
+	spin_unlock_irq(&intfdata->susp_lock);
+	usb_autopm_put_interface(serial->interface);
+
 	return 0;
 }
 
@@ -819,6 +884,8 @@ static int sierra_startup(struct usb_serial *serial)
 			return -ENOMEM;
 		}
 		spin_lock_init(&portdata->lock);
+		init_usb_anchor(&portdata->active);
+		init_usb_anchor(&portdata->delayed);
 		/* Set the port private data pointer */
 		usb_set_serial_port_data(port, portdata);
 	}
@@ -845,6 +912,88 @@ static void sierra_release(struct usb_serial *serial)
 	}
 }
 
+#ifdef CONFIG_PM
+static void stop_read_write_urbs(struct usb_serial *serial)
+{
+	int i, j;
+	struct usb_serial_port *port;
+	struct sierra_port_private *portdata;
+
+	/* Stop reading/writing urbs */
+	for (i = 0; i < serial->num_ports; ++i) {
+		port = serial->port[i];
+		portdata = usb_get_serial_port_data(port);
+		for (j = 0; j < N_IN_URB; j++)
+			usb_kill_urb(portdata->in_urbs[j]);
+		usb_kill_anchored_urbs(&portdata->active);
+	}
+}
+
+static int sierra_suspend(struct usb_serial *serial, pm_message_t message)
+{
+	struct sierra_intf_private *intfdata;
+	int b;
+
+	if (serial->dev->auto_pm) {
+		intfdata = serial->private;
+		spin_lock_irq(&intfdata->susp_lock);
+		b = intfdata->in_flight;
+
+		if (b) {
+			spin_unlock_irq(&intfdata->susp_lock);
+			return -EBUSY;
+		} else {
+			intfdata->suspended = 1;
+			spin_unlock_irq(&intfdata->susp_lock);
+		}
+	}
+	stop_read_write_urbs(serial);
+
+	return 0;
+}
+
+static int sierra_resume(struct usb_serial *serial)
+{
+	struct usb_serial_port *port;
+	struct sierra_intf_private *intfdata = serial->private;
+	struct sierra_port_private *portdata;
+	struct urb *urb;
+	int ec = 0;
+	int i, err;
+
+	spin_lock_irq(&intfdata->susp_lock);
+	for (i = 0; i < serial->num_ports; i++) {
+		port = serial->port[i];
+		portdata = usb_get_serial_port_data(port);
+
+		while ((urb = usb_get_from_anchor(&portdata->delayed))) {
+			usb_anchor_urb(urb, &portdata->active);
+			intfdata->in_flight++;
+			err = usb_submit_urb(urb, GFP_ATOMIC);
+			if (err < 0) {
+				intfdata->in_flight--;
+				usb_unanchor_urb(urb);
+				usb_scuttle_anchored_urbs(&portdata->delayed);
+				break;
+			}
+		}
+
+		if (portdata->opened) {
+			err = sierra_submit_rx_urbs(port, GFP_ATOMIC);
+			if (err)
+				ec++;
+		}
+	}
+	intfdata->suspended = 0;
+	spin_unlock_irq(&intfdata->susp_lock);
+
+	return ec ? -EIO : 0;
+}
+#else
+#define sierra_suspend NULL
+#define sierra_resume NULL
+#endif
+
 static struct usb_serial_driver sierra_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
@@ -865,6 +1014,8 @@ static struct usb_serial_driver sierra_device = {
 	.tiocmset          = sierra_tiocmset,
 	.attach            = sierra_startup,
 	.release           = sierra_release,
+	.suspend	   = sierra_suspend,
+	.resume		   = sierra_resume,
 	.read_int_callback = sierra_instat_callback,
 };
 
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 3c249d8e8b8e..1e58220403d1 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -299,7 +299,6 @@ struct spcp8x5_private {
 	wait_queue_head_t	delta_msr_wait;
 	u8 			line_control;
 	u8 			line_status;
-	u8 			termios_initialized;
 };
 
 /* desc : when device plug in,this function would be called.
@@ -498,6 +497,15 @@ static void spcp8x5_close(struct usb_serial_port *port)
 		dev_dbg(&port->dev, "usb_unlink_urb(read_urb) = %d\n", result);
 }
 
+static void spcp8x5_init_termios(struct tty_struct *tty)
+{
+	/* for the 1st time call this function */
+	*(tty->termios) = tty_std_termios;
+	tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
+	tty->termios->c_ispeed = 115200;
+	tty->termios->c_ospeed = 115200;
+}
+
 /* set the serial param for transfer. we should check if we really need to
  * transfer. if we set flow control we should do this too. */
 static void spcp8x5_set_termios(struct tty_struct *tty,
@@ -514,16 +522,6 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
 	int i;
 	u8 control;
 
-	/* for the 1st time call this function */
-	spin_lock_irqsave(&priv->lock, flags);
-	if (!priv->termios_initialized) {
-		*(tty->termios) = tty_std_termios;
-		tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
-		tty->termios->c_ispeed = 115200;
-		tty->termios->c_ospeed = 115200;
-		priv->termios_initialized = 1;
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
 
 	/* check that they really want us to change something */
 	if (!tty_termios_hw_change(tty->termios, old_termios))
@@ -546,7 +544,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
 	}
 
 	/* Set Baud Rate */
-	baud = tty_get_baud_rate(tty);;
+	baud = tty_get_baud_rate(tty);
 	switch (baud) {
 	case 300:	buf[0] = 0x00;	break;
 	case 600:	buf[0] = 0x01;	break;
@@ -623,8 +621,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
 
 /* open the serial port. do some usb system call. set termios and get the line
  * status of the device. then submit the read urb */
-static int spcp8x5_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct ktermios tmp_termios;
 	struct usb_serial *serial = port->serial;
@@ -658,8 +655,6 @@ static int spcp8x5_open(struct tty_struct *tty,
 	priv->line_status = status & 0xf0 ;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/* FIXME: need to assert RTS and DTR if CRTSCTS off */
-
 	dbg("%s - submitting read urb", __func__);
 	port->read_urb->dev = serial->dev;
 	ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
@@ -1011,6 +1006,7 @@ static struct usb_serial_driver spcp8x5_device = {
 	.carrier_raised		= spcp8x5_carrier_raised,
 	.write 			= spcp8x5_write,
 	.set_termios 		= spcp8x5_set_termios,
+	.init_termios		= spcp8x5_init_termios,
 	.ioctl 			= spcp8x5_ioctl,
 	.tiocmget 		= spcp8x5_tiocmget,
 	.tiocmset 		= spcp8x5_tiocmset,
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index 6157fac9366b..cb7e95f9fcbf 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -124,8 +124,7 @@ exit:
 	spin_unlock(&priv->lock);
 }
 
-static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port,
-			struct file *filp)
+static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct symbol_private *priv = usb_get_serial_data(port->serial);
 	unsigned long flags;
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 3bc609fe2242..1e9dc8821698 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -98,8 +98,7 @@ struct ti_device {
 
 static int ti_startup(struct usb_serial *serial);
 static void ti_release(struct usb_serial *serial);
-static int ti_open(struct tty_struct *tty, struct usb_serial_port *port,
-		struct file *file);
+static int ti_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void ti_close(struct usb_serial_port *port);
 static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
 		const unsigned char *data, int count);
@@ -492,8 +491,7 @@ static void ti_release(struct usb_serial *serial)
 }
 
 
-static int ti_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *file)
+static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct ti_port *tport = usb_get_serial_port_data(port);
 	struct ti_device *tdev;
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 99188c92068b..ff75a3589e7e 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -35,6 +35,7 @@
 #include <linux/serial.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
+#include <linux/kfifo.h>
 #include "pl2303.h"
 
 /*
@@ -43,8 +44,6 @@
 #define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux/"
 #define DRIVER_DESC "USB Serial Driver core"
 
-static void port_free(struct usb_serial_port *port);
-
 /* Driver structure we register with the USB core */
 static struct usb_driver usb_serial_driver = {
 	.name =		"usbserial",
@@ -68,6 +67,11 @@ static struct usb_serial *serial_table[SERIAL_TTY_MINORS];
 static DEFINE_MUTEX(table_lock);
 static LIST_HEAD(usb_serial_driver_list);
 
+/*
+ * Look up the serial structure.  If it is found and it hasn't been
+ * disconnected, return with its disc_mutex held and its refcount
+ * incremented.  Otherwise return NULL.
+ */
 struct usb_serial *usb_serial_get_by_index(unsigned index)
 {
 	struct usb_serial *serial;
@@ -75,8 +79,15 @@ struct usb_serial *usb_serial_get_by_index(unsigned index)
 	mutex_lock(&table_lock);
 	serial = serial_table[index];
 
-	if (serial)
-		kref_get(&serial->kref);
+	if (serial) {
+		mutex_lock(&serial->disc_mutex);
+		if (serial->disconnected) {
+			mutex_unlock(&serial->disc_mutex);
+			serial = NULL;
+		} else {
+			kref_get(&serial->kref);
+		}
+	}
 	mutex_unlock(&table_lock);
 	return serial;
 }
@@ -125,8 +136,10 @@ static void return_serial(struct usb_serial *serial)
 
 	dbg("%s", __func__);
 
+	mutex_lock(&table_lock);
 	for (i = 0; i < serial->num_ports; ++i)
 		serial_table[serial->minor + i] = NULL;
+	mutex_unlock(&table_lock);
 }
 
 static void destroy_serial(struct kref *kref)
@@ -145,244 +158,224 @@ static void destroy_serial(struct kref *kref)
 
 	serial->type->release(serial);
 
-	for (i = 0; i < serial->num_ports; ++i) {
+	/* Now that nothing is using the ports, they can be freed */
+	for (i = 0; i < serial->num_port_pointers; ++i) {
 		port = serial->port[i];
-		if (port)
+		if (port) {
+			port->serial = NULL;
 			put_device(&port->dev);
-	}
-
-	/* If this is a "fake" port, we have to clean it up here, as it will
-	 * not get cleaned up in port_release() as it was never registered with
-	 * the driver core */
-	if (serial->num_ports < serial->num_port_pointers) {
-		for (i = serial->num_ports;
-					i < serial->num_port_pointers; ++i) {
-			port = serial->port[i];
-			if (port)
-				port_free(port);
 		}
 	}
 
 	usb_put_dev(serial->dev);
-
-	/* free up any memory that we allocated */
 	kfree(serial);
 }
 
 void usb_serial_put(struct usb_serial *serial)
 {
-	mutex_lock(&table_lock);
 	kref_put(&serial->kref, destroy_serial);
-	mutex_unlock(&table_lock);
 }
 
 /*****************************************************************************
  * Driver tty interface functions
  *****************************************************************************/
-static int serial_open (struct tty_struct *tty, struct file *filp)
+
+/**
+ * serial_install - install tty
+ * @driver: the driver (USB in our case)
+ * @tty: the tty being created
+ *
+ * Create the termios objects for this tty.  We use the default
+ * USB serial settings but permit them to be overridden by
+ * serial->type->init_termios.
+ *
+ * This is the first place a new tty gets used.  Hence this is where we
+ * acquire references to the usb_serial structure and the driver module,
+ * where we store a pointer to the port, and where we do an autoresume.
+ * All these actions are reversed in serial_release().
+ */
+static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
 {
+	int idx = tty->index;
 	struct usb_serial *serial;
 	struct usb_serial_port *port;
-	unsigned int portNumber;
-	int retval = 0;
-	int first = 0;
+	int retval = -ENODEV;
 
 	dbg("%s", __func__);
 
-	/* get the serial object associated with this tty pointer */
-	serial = usb_serial_get_by_index(tty->index);
-	if (!serial) {
-		tty->driver_data = NULL;
-		return -ENODEV;
-	}
+	serial = usb_serial_get_by_index(idx);
+	if (!serial)
+		return retval;
 
-	mutex_lock(&serial->disc_mutex);
-	portNumber = tty->index - serial->minor;
-	port = serial->port[portNumber];
-	if (!port || serial->disconnected)
-		retval = -ENODEV;
-	else
-		get_device(&port->dev);
-	/*
-	 * Note: Our locking order requirement does not allow port->mutex
-	 * to be acquired while serial->disc_mutex is held.
-	 */
-	mutex_unlock(&serial->disc_mutex);
+	port = serial->port[idx - serial->minor];
+	if (!port)
+		goto error_no_port;
+	if (!try_module_get(serial->type->driver.owner))
+		goto error_module_get;
+
+	/* perform the standard setup */
+	retval = tty_init_termios(tty);
 	if (retval)
-		goto bailout_serial_put;
+		goto error_init_termios;
 
-	if (mutex_lock_interruptible(&port->mutex)) {
-		retval = -ERESTARTSYS;
-		goto bailout_port_put;
-	}
+	retval = usb_autopm_get_interface(serial->interface);
+	if (retval)
+		goto error_get_interface;
 
-	++port->port.count;
+	mutex_unlock(&serial->disc_mutex);
+
+	/* allow the driver to update the settings */
+	if (serial->type->init_termios)
+		serial->type->init_termios(tty);
 
-	/* set up our port structure making the tty driver
-	 * remember our port object, and us it */
 	tty->driver_data = port;
-	tty_port_tty_set(&port->port, tty);
 
-	/* If the console is attached, the device is already open */
-	if (port->port.count == 1 && !port->console) {
-		first = 1;
-		/* lock this module before we call it
-		 * this may fail, which means we must bail out,
-		 * safe because we are called with BKL held */
-		if (!try_module_get(serial->type->driver.owner)) {
-			retval = -ENODEV;
-			goto bailout_mutex_unlock;
-		}
+	/* Final install (we use the default method) */
+	tty_driver_kref_get(driver);
+	tty->count++;
+	driver->ttys[idx] = tty;
+	return retval;
+
+ error_get_interface:
+ error_init_termios:
+	module_put(serial->type->driver.owner);
+ error_module_get:
+ error_no_port:
+	usb_serial_put(serial);
+	mutex_unlock(&serial->disc_mutex);
+	return retval;
+}
 
+static int serial_open(struct tty_struct *tty, struct file *filp)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial = port->serial;
+	int retval;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	spin_lock_irq(&port->port.lock);
+	if (!tty_hung_up_p(filp))
+		++port->port.count;
+	spin_unlock_irq(&port->port.lock);
+	tty_port_tty_set(&port->port, tty);
+
+	/* Do the device-specific open only if the hardware isn't
+	 * already initialized.
+	 */
+	if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) {
+		if (mutex_lock_interruptible(&port->mutex))
+			return -ERESTARTSYS;
 		mutex_lock(&serial->disc_mutex);
 		if (serial->disconnected)
 			retval = -ENODEV;
 		else
-			retval = usb_autopm_get_interface(serial->interface);
-		if (retval)
-			goto bailout_module_put;
-
-		/* only call the device specific open if this
-		 * is the first time the port is opened */
-		retval = serial->type->open(tty, port, filp);
-		if (retval)
-			goto bailout_interface_put;
+			retval = port->serial->type->open(tty, port);
 		mutex_unlock(&serial->disc_mutex);
+		mutex_unlock(&port->mutex);
+		if (retval)
+			return retval;
 		set_bit(ASYNCB_INITIALIZED, &port->port.flags);
 	}
-	mutex_unlock(&port->mutex);
+
 	/* Now do the correct tty layer semantics */
 	retval = tty_port_block_til_ready(&port->port, tty, filp);
-	if (retval == 0) {
-		if (!first)
-			usb_serial_put(serial);
-		return 0;
-	}
-	mutex_lock(&port->mutex);
-	if (first == 0)
-		goto bailout_mutex_unlock;
-	/* Undo the initial port actions */
-	mutex_lock(&serial->disc_mutex);
-bailout_interface_put:
-	usb_autopm_put_interface(serial->interface);
-bailout_module_put:
-	mutex_unlock(&serial->disc_mutex);
-	module_put(serial->type->driver.owner);
-bailout_mutex_unlock:
-	port->port.count = 0;
-	tty->driver_data = NULL;
-	tty_port_tty_set(&port->port, NULL);
-	mutex_unlock(&port->mutex);
-bailout_port_put:
-	put_device(&port->dev);
-bailout_serial_put:
-	usb_serial_put(serial);
 	return retval;
 }
 
 /**
- *	serial_do_down		-	shut down hardware
- *	@port: port to shut down
- *
- *	Shut down a USB port unless it is the console. We never shut down the
- *	console hardware as it will always be in use.
+ * serial_down - shut down hardware
+ * @port: port to shut down
  *
- *	Don't free any resources at this point
+ * Shut down a USB serial port unless it is the console.  We never
+ * shut down the console hardware as it will always be in use.
  */
-static void serial_do_down(struct usb_serial_port *port)
+static void serial_down(struct usb_serial_port *port)
 {
 	struct usb_serial_driver *drv = port->serial->type;
-	struct usb_serial *serial;
-	struct module *owner;
 
-	/* The console is magical, do not hang up the console hardware
-	   or there will be tears */
+	/*
+	 * The console is magical.  Do not hang up the console hardware
+	 * or there will be tears.
+	 */
 	if (port->console)
 		return;
 
-	mutex_lock(&port->mutex);
-	serial = port->serial;
-	owner = serial->type->driver.owner;
+	/* Don't call the close method if the hardware hasn't been
+	 * initialized.
+	 */
+	if (!test_and_clear_bit(ASYNCB_INITIALIZED, &port->port.flags))
+		return;
 
+	mutex_lock(&port->mutex);
 	if (drv->close)
 		drv->close(port);
-
 	mutex_unlock(&port->mutex);
 }
 
-/**
- *	serial_do_free		-	free resources post close/hangup
- *	@port: port to free up
- *
- *	Do the resource freeing and refcount dropping for the port. We must
- *	be careful about ordering and we must avoid freeing up the console.
- */
-
-static void serial_do_free(struct usb_serial_port *port)
+static void serial_hangup(struct tty_struct *tty)
 {
-	struct usb_serial *serial;
-	struct module *owner;
+	struct usb_serial_port *port = tty->driver_data;
 
-	/* The console is magical, do not hang up the console hardware
-	   or there will be tears */
-	if (port->console)
-		return;
+	dbg("%s - port %d", __func__, port->number);
 
-	serial = port->serial;
-	owner = serial->type->driver.owner;
-	put_device(&port->dev);
-	/* Mustn't dereference port any more */
-	mutex_lock(&serial->disc_mutex);
-	if (!serial->disconnected)
-		usb_autopm_put_interface(serial->interface);
-	mutex_unlock(&serial->disc_mutex);
-	usb_serial_put(serial);
-	/* Mustn't dereference serial any more */
-	module_put(owner);
+	serial_down(port);
+	tty_port_hangup(&port->port);
 }
 
 static void serial_close(struct tty_struct *tty, struct file *filp)
 {
 	struct usb_serial_port *port = tty->driver_data;
 
-	if (!port)
-		return;
-
 	dbg("%s - port %d", __func__, port->number);
 
-	/* FIXME:
-	   This leaves a very narrow race. Really we should do the
-	   serial_do_free() on tty->shutdown(), but tty->shutdown can
-	   be called from IRQ context and serial_do_free can sleep.
-
-	   The right fix is probably to make the tty free (which is rare)
-	   and thus tty->shutdown() occur via a work queue and simplify all
-	   the drivers that use it.
-	*/
-	if (tty_hung_up_p(filp)) {
-		/* serial_hangup already called serial_down at this point.
-		   Another user may have already reopened the port but
-		   serial_do_free is refcounted */
-		serial_do_free(port);
+	if (tty_hung_up_p(filp))
 		return;
-	}
-
 	if (tty_port_close_start(&port->port, tty, filp) == 0)
 		return;
-
-	serial_do_down(port);		
+	serial_down(port);
 	tty_port_close_end(&port->port, tty);
 	tty_port_tty_set(&port->port, NULL);
-	serial_do_free(port);
 }
 
-static void serial_hangup(struct tty_struct *tty)
+/**
+ * serial_release - free resources post close/hangup
+ * @port: port to free up
+ *
+ * Do the resource freeing and refcount dropping for the port.
+ * Avoid freeing the console.
+ *
+ * Called when the last tty kref is dropped.
+ */
+static void serial_release(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	serial_do_down(port);
-	tty_port_hangup(&port->port);
-	/* We must not free port yet - the USB serial layer depends on it's
-	   continued existence */
+	struct usb_serial *serial;
+	struct module *owner;
+
+	/* The console is magical.  Do not hang up the console hardware
+	 * or there will be tears.
+	 */
+	if (port->console)
+		return;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	/* Standard shutdown processing */
+	tty_shutdown(tty);
+
+	tty->driver_data = NULL;
+
+	serial = port->serial;
+	owner = serial->type->driver.owner;
+
+	mutex_lock(&serial->disc_mutex);
+	if (!serial->disconnected)
+		usb_autopm_put_interface(serial->interface);
+	mutex_unlock(&serial->disc_mutex);
+
+	usb_serial_put(serial);
+	module_put(owner);
 }
 
 static int serial_write(struct tty_struct *tty, const unsigned char *buf,
@@ -527,6 +520,7 @@ static int serial_proc_show(struct seq_file *m, void *v)
 
 		seq_putc(m, '\n');
 		usb_serial_put(serial);
+		mutex_unlock(&serial->disc_mutex);
 	}
 	return 0;
 }
@@ -596,14 +590,6 @@ static void usb_serial_port_work(struct work_struct *work)
 	tty_kref_put(tty);
 }
 
-static void port_release(struct device *dev)
-{
-	struct usb_serial_port *port = to_usb_serial_port(dev);
-
-	dbg ("%s - %s", __func__, dev_name(dev));
-	port_free(port);
-}
-
 static void kill_traffic(struct usb_serial_port *port)
 {
 	usb_kill_urb(port->read_urb);
@@ -623,8 +609,12 @@ static void kill_traffic(struct usb_serial_port *port)
 	usb_kill_urb(port->interrupt_out_urb);
 }
 
-static void port_free(struct usb_serial_port *port)
+static void port_release(struct device *dev)
 {
+	struct usb_serial_port *port = to_usb_serial_port(dev);
+
+	dbg ("%s - %s", __func__, dev_name(dev));
+
 	/*
 	 * Stop all the traffic before cancelling the work, so that
 	 * nobody will restart it by calling usb_serial_port_softint.
@@ -636,6 +626,8 @@ static void port_free(struct usb_serial_port *port)
 	usb_free_urb(port->write_urb);
 	usb_free_urb(port->interrupt_in_urb);
 	usb_free_urb(port->interrupt_out_urb);
+	if (!IS_ERR(port->write_fifo) && port->write_fifo)
+		kfifo_free(port->write_fifo);
 	kfree(port->bulk_in_buffer);
 	kfree(port->bulk_out_buffer);
 	kfree(port->interrupt_in_buffer);
@@ -935,6 +927,11 @@ int usb_serial_probe(struct usb_interface *interface,
 		mutex_init(&port->mutex);
 		INIT_WORK(&port->work, usb_serial_port_work);
 		serial->port[i] = port;
+		port->dev.parent = &interface->dev;
+		port->dev.driver = NULL;
+		port->dev.bus = &usb_serial_bus_type;
+		port->dev.release = &port_release;
+		device_initialize(&port->dev);
 	}
 
 	/* set up the endpoint information */
@@ -970,6 +967,10 @@ int usb_serial_probe(struct usb_interface *interface,
 			dev_err(&interface->dev, "No free urbs available\n");
 			goto probe_error;
 		}
+		port->write_fifo = kfifo_alloc(PAGE_SIZE, GFP_KERNEL,
+			&port->lock);
+		if (IS_ERR(port->write_fifo))
+			goto probe_error;
 		buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
 		port->bulk_out_size = buffer_size;
 		port->bulk_out_endpointAddress = endpoint->bEndpointAddress;
@@ -1077,15 +1078,10 @@ int usb_serial_probe(struct usb_interface *interface,
 	/* register all of the individual ports with the driver core */
 	for (i = 0; i < num_ports; ++i) {
 		port = serial->port[i];
-		port->dev.parent = &interface->dev;
-		port->dev.driver = NULL;
-		port->dev.bus = &usb_serial_bus_type;
-		port->dev.release = &port_release;
-
 		dev_set_name(&port->dev, "ttyUSB%d", port->number);
 		dbg ("%s - registering %s", __func__, dev_name(&port->dev));
 		port->dev_state = PORT_REGISTERING;
-		retval = device_register(&port->dev);
+		retval = device_add(&port->dev);
 		if (retval) {
 			dev_err(&port->dev, "Error registering port device, "
 				"continuing\n");
@@ -1103,39 +1099,7 @@ exit:
 	return 0;
 
 probe_error:
-	for (i = 0; i < num_bulk_in; ++i) {
-		port = serial->port[i];
-		if (!port)
-			continue;
-		usb_free_urb(port->read_urb);
-		kfree(port->bulk_in_buffer);
-	}
-	for (i = 0; i < num_bulk_out; ++i) {
-		port = serial->port[i];
-		if (!port)
-			continue;
-		usb_free_urb(port->write_urb);
-		kfree(port->bulk_out_buffer);
-	}
-	for (i = 0; i < num_interrupt_in; ++i) {
-		port = serial->port[i];
-		if (!port)
-			continue;
-		usb_free_urb(port->interrupt_in_urb);
-		kfree(port->interrupt_in_buffer);
-	}
-	for (i = 0; i < num_interrupt_out; ++i) {
-		port = serial->port[i];
-		if (!port)
-			continue;
-		usb_free_urb(port->interrupt_out_urb);
-		kfree(port->interrupt_out_buffer);
-	}
-
-	/* free up any memory that we allocated */
-	for (i = 0; i < serial->num_port_pointers; ++i)
-		kfree(serial->port[i]);
-	kfree(serial);
+	usb_serial_put(serial);
 	return -EIO;
 }
 EXPORT_SYMBOL_GPL(usb_serial_probe);
@@ -1161,10 +1125,7 @@ void usb_serial_disconnect(struct usb_interface *interface)
 		if (port) {
 			struct tty_struct *tty = tty_port_tty_get(&port->port);
 			if (tty) {
-				/* The hangup will occur asynchronously but
-				   the object refcounts will sort out all the
-				   cleanup */
-				tty_hangup(tty);
+				tty_vhangup(tty);
 				tty_kref_put(tty);
 			}
 			kill_traffic(port);
@@ -1189,8 +1150,7 @@ void usb_serial_disconnect(struct usb_interface *interface)
 	}
 	serial->type->disconnect(serial);
 
-	/* let the last holder of this object
-	 * cause it to be cleaned up */
+	/* let the last holder of this object cause it to be cleaned up */
 	usb_serial_put(serial);
 	dev_info(dev, "device disconnected\n");
 }
@@ -1204,15 +1164,19 @@ int usb_serial_suspend(struct usb_interface *intf, pm_message_t message)
 
 	serial->suspending = 1;
 
+	if (serial->type->suspend) {
+		r = serial->type->suspend(serial, message);
+		if (r < 0)
+			goto err_out;
+	}
+
 	for (i = 0; i < serial->num_ports; ++i) {
 		port = serial->port[i];
 		if (port)
 			kill_traffic(port);
 	}
 
-	if (serial->type->suspend)
-		r = serial->type->suspend(serial, message);
-
+err_out:
 	return r;
 }
 EXPORT_SYMBOL(usb_serial_suspend);
@@ -1246,6 +1210,8 @@ static const struct tty_operations serial_ops = {
 	.chars_in_buffer =	serial_chars_in_buffer,
 	.tiocmget =		serial_tiocmget,
 	.tiocmset =		serial_tiocmset,
+	.shutdown = 		serial_release,
+	.install = 		serial_install,
 	.proc_fops =		&serial_proc_fops,
 };
 
diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c
index 614800972dc3..7b5bfc4edd3d 100644
--- a/drivers/usb/serial/usb_debug.c
+++ b/drivers/usb/serial/usb_debug.c
@@ -43,11 +43,10 @@ static struct usb_driver debug_driver = {
 	.no_dynamic_id = 	1,
 };
 
-static int usb_debug_open(struct tty_struct *tty, struct usb_serial_port *port,
-							struct file *filp)
+static int usb_debug_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	port->bulk_out_size = USB_DEBUG_MAX_PACKET_SIZE;
-	return usb_serial_generic_open(tty, port, filp);
+	return usb_serial_generic_open(tty, port);
 }
 
 /* This HW really does not support a serial break, so one will be
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index f5d0f64dcc52..1aa5d20a5d99 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -36,8 +36,7 @@
 #define DRIVER_DESC "USB HandSpring Visor / Palm OS driver"
 
 /* function prototypes for a handspring visor */
-static int  visor_open(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filp);
+static int  visor_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void visor_close(struct usb_serial_port *port);
 static int  visor_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count);
@@ -273,8 +272,7 @@ static int stats;
 /******************************************************************************
  * Handspring Visor specific driver functions
  ******************************************************************************/
-static int visor_open(struct tty_struct *tty, struct usb_serial_port *port,
-							struct file *filp)
+static int visor_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct visor_private *priv = usb_get_serial_port_data(port);
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 8d126dd7a02e..62424eec33ec 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -146,7 +146,7 @@ static int  whiteheat_firmware_attach(struct usb_serial *serial);
 static int  whiteheat_attach(struct usb_serial *serial);
 static void whiteheat_release(struct usb_serial *serial);
 static int  whiteheat_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+			struct usb_serial_port *port);
 static void whiteheat_close(struct usb_serial_port *port);
 static int  whiteheat_write(struct tty_struct *tty,
 			struct usb_serial_port *port,
@@ -259,7 +259,7 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command,
 						__u8 *data, __u8 datasize);
 static int firm_open(struct usb_serial_port *port);
 static int firm_close(struct usb_serial_port *port);
-static int firm_setup_port(struct tty_struct *tty);
+static void firm_setup_port(struct tty_struct *tty);
 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff);
 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff);
 static int firm_set_break(struct usb_serial_port *port, __u8 onoff);
@@ -659,8 +659,7 @@ static void whiteheat_release(struct usb_serial *serial)
 	return;
 }
 
-static int whiteheat_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int		retval = 0;
 
@@ -1211,7 +1210,7 @@ static int firm_close(struct usb_serial_port *port)
 }
 
 
-static int firm_setup_port(struct tty_struct *tty)
+static void firm_setup_port(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct whiteheat_port_settings port_settings;
@@ -1286,7 +1285,7 @@ static int firm_setup_port(struct tty_struct *tty)
 	port_settings.lloop = 0;
 
 	/* now send the message to the device */
-	return firm_send_command(port, WHITEHEAT_SETUP_PORT,
+	firm_send_command(port, WHITEHEAT_SETUP_PORT,
 			(__u8 *)&port_settings, sizeof(port_settings));
 }
 
diff --git a/drivers/usb/storage/datafab.c b/drivers/usb/storage/datafab.c
index 2b6e565262c2..ded836b02d7b 100644
--- a/drivers/usb/storage/datafab.c
+++ b/drivers/usb/storage/datafab.c
@@ -334,7 +334,7 @@ static int datafab_determine_lun(struct us_data *us,
 	unsigned char *buf;
 	int count = 0, rc;
 
-	if (!us || !info)
+	if (!info)
 		return USB_STOR_TRANSPORT_ERROR;
 
 	memcpy(command, scommand, 8);
@@ -399,7 +399,7 @@ static int datafab_id_device(struct us_data *us,
 	unsigned char *reply;
 	int rc;
 
-	if (!us || !info)
+	if (!info)
 		return USB_STOR_TRANSPORT_ERROR;
 
 	if (info->lun == -1) {
diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index ec17c96371af..105d900150c1 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -102,5 +102,5 @@ int usb_stor_huawei_e220_init(struct us_data *us)
 				      USB_TYPE_STANDARD | USB_RECIP_DEVICE,
 				      0x01, 0x0, NULL, 0x0, 1000);
 	US_DEBUGP("Huawei mode set result is %d\n", result);
-	return (result ? 0 : -ENODEV);
+	return 0;
 }
diff --git a/drivers/usb/storage/jumpshot.c b/drivers/usb/storage/jumpshot.c
index 1c69420e3acf..6168596c5ac6 100644
--- a/drivers/usb/storage/jumpshot.c
+++ b/drivers/usb/storage/jumpshot.c
@@ -335,7 +335,7 @@ static int jumpshot_id_device(struct us_data *us,
 	unsigned char *reply;
 	int 	 rc;
 
-	if (!us || !info)
+	if (!info)
 		return USB_STOR_TRANSPORT_ERROR;
 
 	command[0] = 0xE0;
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
index 380233bd6a39..80e65f29921c 100644
--- a/drivers/usb/storage/onetouch.c
+++ b/drivers/usb/storage/onetouch.c
@@ -163,7 +163,7 @@ static void usb_onetouch_pm_hook(struct us_data *us, int action)
 			usb_kill_urb(onetouch->irq);
 			break;
 		case US_RESUME:
-			if (usb_submit_urb(onetouch->irq, GFP_KERNEL) != 0)
+			if (usb_submit_urb(onetouch->irq, GFP_NOIO) != 0)
 				dev_err(&onetouch->irq->dev->dev,
 					"usb_submit_urb failed\n");
 			break;
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 7477d411959f..079ae0f7bec1 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -66,13 +66,6 @@ UNUSUAL_DEV(  0x03eb, 0x2002, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE),
 
-/* modified by Tobias Lorenz <tobias.lorenz@gmx.net> */
-UNUSUAL_DEV(  0x03ee, 0x6901, 0x0000, 0x0200,
-		"Mitsumi",
-		"USB FDD",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_SINGLE_LUN ),
-
 /* Reported by Rodolfo Quesada <rquesada@roqz.net> */
 UNUSUAL_DEV(  0x03ee, 0x6906, 0x0003, 0x0003,
 		"VIA Technologies Inc.",
@@ -233,13 +226,6 @@ UNUSUAL_DEV(  0x0421, 0x0495, 0x0370, 0x0370,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_MAX_SECTORS_64 ),
 
-/* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */
-UNUSUAL_DEV(  0x0424, 0x0fdc, 0x0210, 0x0210,
-		"SMSC",
-		"FDC GOLD-2.30",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_SINGLE_LUN ),
-
 #ifdef NO_SDDR09
 UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
 		"Microtech",
@@ -664,19 +650,13 @@ UNUSUAL_DEV(  0x055d, 0x2020, 0x0000, 0x0210,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN ),
 
-		
+/* We keep this entry to force the transport; firmware 3.00 and later is ok. */
 UNUSUAL_DEV(  0x057b, 0x0000, 0x0000, 0x0299,
 		"Y-E Data",
 		"Flashbuster-U",
 		US_SC_DEVICE,  US_PR_CB, NULL,
 		US_FL_SINGLE_LUN),
 
-UNUSUAL_DEV(  0x057b, 0x0000, 0x0300, 0x9999,
-		"Y-E Data",
-		"Flashbuster-U",
-		US_SC_DEVICE,  US_PR_DEVICE, NULL,
-		US_FL_SINGLE_LUN),
-
 /* Reported by Johann Cardon <johann.cardon@free.fr>
  * This entry is needed only because the device reports
  * bInterfaceClass = 0xff (vendor-specific)
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index 60ba631e99c2..b62f2bc064f6 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -18,7 +18,7 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/kref.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/mutex.h>
 
@@ -28,7 +28,7 @@
 #define USB_SKEL_PRODUCT_ID	0xfff0
 
 /* table of devices that work with this driver */
-static struct usb_device_id skel_table [] = {
+static struct usb_device_id skel_table[] = {
 	{ USB_DEVICE(USB_SKEL_VENDOR_ID, USB_SKEL_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
@@ -52,15 +52,21 @@ struct usb_skel {
 	struct usb_interface	*interface;		/* the interface for this device */
 	struct semaphore	limit_sem;		/* limiting the number of writes in progress */
 	struct usb_anchor	submitted;		/* in case we need to retract our submissions */
+	struct urb		*bulk_in_urb;		/* the urb to read data with */
 	unsigned char           *bulk_in_buffer;	/* the buffer to receive data */
 	size_t			bulk_in_size;		/* the size of the receive buffer */
+	size_t			bulk_in_filled;		/* number of bytes in the buffer */
+	size_t			bulk_in_copied;		/* already copied to user space */
 	__u8			bulk_in_endpointAddr;	/* the address of the bulk in endpoint */
 	__u8			bulk_out_endpointAddr;	/* the address of the bulk out endpoint */
 	int			errors;			/* the last request tanked */
 	int			open_count;		/* count the number of openers */
+	bool			ongoing_read;		/* a read is going on */
+	bool			processed_urb;		/* indicates we haven't processed the urb */
 	spinlock_t		err_lock;		/* lock for errors */
 	struct kref		kref;
 	struct mutex		io_mutex;		/* synchronize I/O with disconnect */
+	struct completion	bulk_in_completion;	/* to wait for an ongoing read */
 };
 #define to_skel_dev(d) container_of(d, struct usb_skel, kref)
 
@@ -71,6 +77,7 @@ static void skel_delete(struct kref *kref)
 {
 	struct usb_skel *dev = to_skel_dev(kref);
 
+	usb_free_urb(dev->bulk_in_urb);
 	usb_put_dev(dev->udev);
 	kfree(dev->bulk_in_buffer);
 	kfree(dev);
@@ -87,7 +94,7 @@ static int skel_open(struct inode *inode, struct file *file)
 
 	interface = usb_find_interface(&skel_driver, subminor);
 	if (!interface) {
-		err ("%s - error, can't find device for minor %d",
+		err("%s - error, can't find device for minor %d",
 		     __func__, subminor);
 		retval = -ENODEV;
 		goto exit;
@@ -174,38 +181,190 @@ static int skel_flush(struct file *file, fl_owner_t id)
 	return res;
 }
 
-static ssize_t skel_read(struct file *file, char *buffer, size_t count, loff_t *ppos)
+static void skel_read_bulk_callback(struct urb *urb)
 {
 	struct usb_skel *dev;
-	int retval;
-	int bytes_read;
+
+	dev = urb->context;
+
+	spin_lock(&dev->err_lock);
+	/* sync/async unlink faults aren't errors */
+	if (urb->status) {
+		if (!(urb->status == -ENOENT ||
+		    urb->status == -ECONNRESET ||
+		    urb->status == -ESHUTDOWN))
+			err("%s - nonzero write bulk status received: %d",
+			    __func__, urb->status);
+
+		dev->errors = urb->status;
+	} else {
+		dev->bulk_in_filled = urb->actual_length;
+	}
+	dev->ongoing_read = 0;
+	spin_unlock(&dev->err_lock);
+
+	complete(&dev->bulk_in_completion);
+}
+
+static int skel_do_read_io(struct usb_skel *dev, size_t count)
+{
+	int rv;
+
+	/* prepare a read */
+	usb_fill_bulk_urb(dev->bulk_in_urb,
+			dev->udev,
+			usb_rcvbulkpipe(dev->udev,
+				dev->bulk_in_endpointAddr),
+			dev->bulk_in_buffer,
+			min(dev->bulk_in_size, count),
+			skel_read_bulk_callback,
+			dev);
+	/* tell everybody to leave the URB alone */
+	spin_lock_irq(&dev->err_lock);
+	dev->ongoing_read = 1;
+	spin_unlock_irq(&dev->err_lock);
+
+	/* do it */
+	rv = usb_submit_urb(dev->bulk_in_urb, GFP_KERNEL);
+	if (rv < 0) {
+		err("%s - failed submitting read urb, error %d",
+			__func__, rv);
+		dev->bulk_in_filled = 0;
+		rv = (rv == -ENOMEM) ? rv : -EIO;
+		spin_lock_irq(&dev->err_lock);
+		dev->ongoing_read = 0;
+		spin_unlock_irq(&dev->err_lock);
+	}
+
+	return rv;
+}
+
+static ssize_t skel_read(struct file *file, char *buffer, size_t count,
+			 loff_t *ppos)
+{
+	struct usb_skel *dev;
+	int rv;
+	bool ongoing_io;
 
 	dev = (struct usb_skel *)file->private_data;
 
-	mutex_lock(&dev->io_mutex);
+	/* if we cannot read at all, return EOF */
+	if (!dev->bulk_in_urb || !count)
+		return 0;
+
+	/* no concurrent readers */
+	rv = mutex_lock_interruptible(&dev->io_mutex);
+	if (rv < 0)
+		return rv;
+
 	if (!dev->interface) {		/* disconnect() was called */
-		retval = -ENODEV;
+		rv = -ENODEV;
 		goto exit;
 	}
 
-	/* do a blocking bulk read to get data from the device */
-	retval = usb_bulk_msg(dev->udev,
-			      usb_rcvbulkpipe(dev->udev, dev->bulk_in_endpointAddr),
-			      dev->bulk_in_buffer,
-			      min(dev->bulk_in_size, count),
-			      &bytes_read, 10000);
-
-	/* if the read was successful, copy the data to userspace */
-	if (!retval) {
-		if (copy_to_user(buffer, dev->bulk_in_buffer, bytes_read))
-			retval = -EFAULT;
-		else
-			retval = bytes_read;
+	/* if IO is under way, we must not touch things */
+retry:
+	spin_lock_irq(&dev->err_lock);
+	ongoing_io = dev->ongoing_read;
+	spin_unlock_irq(&dev->err_lock);
+
+	if (ongoing_io) {
+		/* nonblocking IO shall not wait */
+		if (file->f_flags & O_NONBLOCK) {
+			rv = -EAGAIN;
+			goto exit;
+		}
+		/*
+		 * IO may take forever
+		 * hence wait in an interruptible state
+		 */
+		rv = wait_for_completion_interruptible(&dev->bulk_in_completion);
+		if (rv < 0)
+			goto exit;
+		/*
+		 * by waiting we also semiprocessed the urb
+		 * we must finish now
+		 */
+		dev->bulk_in_copied = 0;
+		dev->processed_urb = 1;
+	}
+
+	if (!dev->processed_urb) {
+		/*
+		 * the URB hasn't been processed
+		 * do it now
+		 */
+		wait_for_completion(&dev->bulk_in_completion);
+		dev->bulk_in_copied = 0;
+		dev->processed_urb = 1;
+	}
+
+	/* errors must be reported */
+	rv = dev->errors;
+	if (rv < 0) {
+		/* any error is reported once */
+		dev->errors = 0;
+		/* to preserve notifications about reset */
+		rv = (rv == -EPIPE) ? rv : -EIO;
+		/* no data to deliver */
+		dev->bulk_in_filled = 0;
+		/* report it */
+		goto exit;
 	}
 
+	/*
+	 * if the buffer is filled we may satisfy the read
+	 * else we need to start IO
+	 */
+
+	if (dev->bulk_in_filled) {
+		/* we had read data */
+		size_t available = dev->bulk_in_filled - dev->bulk_in_copied;
+		size_t chunk = min(available, count);
+
+		if (!available) {
+			/*
+			 * all data has been used
+			 * actual IO needs to be done
+			 */
+			rv = skel_do_read_io(dev, count);
+			if (rv < 0)
+				goto exit;
+			else
+				goto retry;
+		}
+		/*
+		 * data is available
+		 * chunk tells us how much shall be copied
+		 */
+
+		if (copy_to_user(buffer,
+				 dev->bulk_in_buffer + dev->bulk_in_copied,
+				 chunk))
+			rv = -EFAULT;
+		else
+			rv = chunk;
+
+		dev->bulk_in_copied += chunk;
+
+		/*
+		 * if we are asked for more than we have,
+		 * we start IO but don't wait
+		 */
+		if (available < count)
+			skel_do_read_io(dev, count - chunk);
+	} else {
+		/* no data in the buffer */
+		rv = skel_do_read_io(dev, count);
+		if (rv < 0)
+			goto exit;
+		else if (!file->f_flags & O_NONBLOCK)
+			goto retry;
+		rv = -EAGAIN;
+	}
 exit:
 	mutex_unlock(&dev->io_mutex);
-	return retval;
+	return rv;
 }
 
 static void skel_write_bulk_callback(struct urb *urb)
@@ -216,7 +375,7 @@ static void skel_write_bulk_callback(struct urb *urb)
 
 	/* sync/async unlink faults aren't errors */
 	if (urb->status) {
-		if(!(urb->status == -ENOENT ||
+		if (!(urb->status == -ENOENT ||
 		    urb->status == -ECONNRESET ||
 		    urb->status == -ESHUTDOWN))
 			err("%s - nonzero write bulk status received: %d",
@@ -233,7 +392,8 @@ static void skel_write_bulk_callback(struct urb *urb)
 	up(&dev->limit_sem);
 }
 
-static ssize_t skel_write(struct file *file, const char *user_buffer, size_t count, loff_t *ppos)
+static ssize_t skel_write(struct file *file, const char *user_buffer,
+			  size_t count, loff_t *ppos)
 {
 	struct usb_skel *dev;
 	int retval = 0;
@@ -247,14 +407,25 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou
 	if (count == 0)
 		goto exit;
 
-	/* limit the number of URBs in flight to stop a user from using up all RAM */
-	if (down_interruptible(&dev->limit_sem)) {
-		retval = -ERESTARTSYS;
-		goto exit;
+	/*
+	 * limit the number of URBs in flight to stop a user from using up all
+	 * RAM
+	 */
+	if (!file->f_flags & O_NONBLOCK) {
+		if (down_interruptible(&dev->limit_sem)) {
+			retval = -ERESTARTSYS;
+			goto exit;
+		}
+	} else {
+		if (down_trylock(&dev->limit_sem)) {
+			retval = -EAGAIN;
+			goto exit;
+		}
 	}
 
 	spin_lock_irq(&dev->err_lock);
-	if ((retval = dev->errors) < 0) {
+	retval = dev->errors;
+	if (retval < 0) {
 		/* any error is reported once */
 		dev->errors = 0;
 		/* to preserve notifications about reset */
@@ -271,7 +442,8 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou
 		goto error;
 	}
 
-	buf = usb_buffer_alloc(dev->udev, writesize, GFP_KERNEL, &urb->transfer_dma);
+	buf = usb_buffer_alloc(dev->udev, writesize, GFP_KERNEL,
+			       &urb->transfer_dma);
 	if (!buf) {
 		retval = -ENOMEM;
 		goto error;
@@ -301,11 +473,15 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou
 	retval = usb_submit_urb(urb, GFP_KERNEL);
 	mutex_unlock(&dev->io_mutex);
 	if (retval) {
-		err("%s - failed submitting write urb, error %d", __func__, retval);
+		err("%s - failed submitting write urb, error %d", __func__,
+		    retval);
 		goto error_unanchor;
 	}
 
-	/* release our reference to this urb, the USB core will eventually free it entirely */
+	/*
+	 * release our reference to this urb, the USB core will eventually free
+	 * it entirely
+	 */
 	usb_free_urb(urb);
 
 
@@ -343,7 +519,8 @@ static struct usb_class_driver skel_class = {
 	.minor_base =	USB_SKEL_MINOR_BASE,
 };
 
-static int skel_probe(struct usb_interface *interface, const struct usb_device_id *id)
+static int skel_probe(struct usb_interface *interface,
+		      const struct usb_device_id *id)
 {
 	struct usb_skel *dev;
 	struct usb_host_interface *iface_desc;
@@ -363,6 +540,7 @@ static int skel_probe(struct usb_interface *interface, const struct usb_device_i
 	mutex_init(&dev->io_mutex);
 	spin_lock_init(&dev->err_lock);
 	init_usb_anchor(&dev->submitted);
+	init_completion(&dev->bulk_in_completion);
 
 	dev->udev = usb_get_dev(interface_to_usbdev(interface));
 	dev->interface = interface;
@@ -384,6 +562,11 @@ static int skel_probe(struct usb_interface *interface, const struct usb_device_i
 				err("Could not allocate bulk_in_buffer");
 				goto error;
 			}
+			dev->bulk_in_urb = usb_alloc_urb(0, GFP_KERNEL);
+			if (!dev->bulk_in_urb) {
+				err("Could not allocate bulk_in_urb");
+				goto error;
+			}
 		}
 
 		if (!dev->bulk_out_endpointAddr &&
@@ -453,6 +636,7 @@ static void skel_draw_down(struct usb_skel *dev)
 	time = usb_wait_anchor_empty_timeout(&dev->submitted, 1000);
 	if (!time)
 		usb_kill_anchored_urbs(&dev->submitted);
+	usb_kill_urb(dev->bulk_in_urb);
 }
 
 static int skel_suspend(struct usb_interface *intf, pm_message_t message)
@@ -465,7 +649,7 @@ static int skel_suspend(struct usb_interface *intf, pm_message_t message)
 	return 0;
 }
 
-static int skel_resume (struct usb_interface *intf)
+static int skel_resume(struct usb_interface *intf)
 {
 	return 0;
 }
diff --git a/drivers/usb/wusbcore/wa-hc.h b/drivers/usb/wusbcore/wa-hc.h
index 586d350cdb4d..d6bea3e0b54a 100644
--- a/drivers/usb/wusbcore/wa-hc.h
+++ b/drivers/usb/wusbcore/wa-hc.h
@@ -47,7 +47,7 @@
  *             to an endpoint on a WUSB device that is connected to a
  *             HWA RC.
  *
- *  xfer       Transfer managment -- this is all the code that gets a
+ *  xfer       Transfer management -- this is all the code that gets a
  *             buffer and pushes it to a device (or viceversa). *
  *
  * Some day a lot of this code will be shared between this driver and