USB: Remove bogus USB_PORT_STAT_SUPER_SPEED symbol.

USB_PORT_STAT_SUPER_SPEED is a made up symbol that the USB core used to
track whether USB ports had a SuperSpeed device attached.  This is a
linux-internal symbol that was used when SuperSpeed and non-SuperSpeed
devices would show up under the same xHCI roothub.  This particular
port status is never returned by external USB 3.0 hubs.  (Instead they
have a USB_PORT_STAT_SPEED_5GBPS that uses a completely different speed
mask.)

Now that the xHCI driver registers two roothubs, USB 3.0 devices will only
show up under USB 3.0 hubs.  Rip out USB_PORT_STAT_SUPER_SPEED and replace
it with calls to hub_is_superspeed().

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>

2 files changed, 8 insertions, 30 deletions

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 825d803720b3..13aafd1b45e5 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -155,14 +155,14 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem);
 
 static int usb_reset_and_verify_device(struct usb_device *udev);
 
-static inline char *portspeed(int portstatus)
+static inline char *portspeed(struct usb_hub *hub, int portstatus)
 {
+	if (hub_is_superspeed(hub->hdev))
+		return "5.0 Gb/s";
 	if (portstatus & USB_PORT_STAT_HIGH_SPEED)
     		return "480 Mb/s";
 	else if (portstatus & USB_PORT_STAT_LOW_SPEED)
 		return "1.5 Mb/s";
-	else if (portstatus & USB_PORT_STAT_SUPER_SPEED)
-		return "5.0 Gb/s";
 	else
 		return "12 Mb/s";
 }
@@ -385,9 +385,6 @@ static int hub_port_status(struct usb_hub *hub, int port1,
 			u16 tmp = *status & USB_SS_PORT_STAT_MASK;
 			if (*status & USB_SS_PORT_STAT_POWER)
 				tmp |= USB_PORT_STAT_POWER;
-			if ((*status & USB_SS_PORT_STAT_SPEED) ==
-					USB_PORT_STAT_SPEED_5GBPS)
-				tmp |= USB_PORT_STAT_SUPER_SPEED;
 			*status = tmp;
 		}
 
@@ -795,12 +792,8 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 			 * USB3 protocol ports will automatically transition
 			 * to Enabled state when detect an USB3.0 device attach.
 			 * Do not disable USB3 protocol ports.
-			 * FIXME: USB3 root hub and external hubs are treated
-			 * differently here.
 			 */
-			if (hdev->descriptor.bDeviceProtocol != 3 ||
-			    (!hdev->parent &&
-			     !(portstatus & USB_PORT_STAT_SUPER_SPEED))) {
+			if (!hub_is_superspeed(hdev)) {
 				clear_port_feature(hdev, port1,
 						   USB_PORT_FEAT_ENABLE);
 				portstatus &= ~USB_PORT_STAT_ENABLE;
@@ -2067,14 +2060,12 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
 		    (portstatus & USB_PORT_STAT_ENABLE)) {
 			if (hub_is_wusb(hub))
 				udev->speed = USB_SPEED_WIRELESS;
-			else if (portstatus & USB_PORT_STAT_SUPER_SPEED)
+			else if (hub_is_superspeed(hub->hdev))
 				udev->speed = USB_SPEED_SUPER;
 			else if (portstatus & USB_PORT_STAT_HIGH_SPEED)
 				udev->speed = USB_SPEED_HIGH;
 			else if (portstatus & USB_PORT_STAT_LOW_SPEED)
 				udev->speed = USB_SPEED_LOW;
-			else if (portstatus & USB_PORT_STAT_SUPER_SPEED)
-				udev->speed = USB_SPEED_SUPER;
 			else
 				udev->speed = USB_SPEED_FULL;
 			return 0;
@@ -3067,7 +3058,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 
 	dev_dbg (hub_dev,
 		"port %d, status %04x, change %04x, %s\n",
-		port1, portstatus, portchange, portspeed (portstatus));
+		port1, portstatus, portchange, portspeed(hub, portstatus));
 
 	if (hub->has_indicators) {
 		set_port_led(hub, port1, HUB_LED_AUTO);
@@ -3168,19 +3159,8 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 		udev->level = hdev->level + 1;
 		udev->wusb = hub_is_wusb(hub);
 
-		/*
-		 * USB 3.0 devices are reset automatically before the connect
-		 * port status change appears, and the root hub port status
-		 * shows the correct speed.  We also get port change
-		 * notifications for USB 3.0 devices from the USB 3.0 portion of
-		 * an external USB 3.0 hub, but this isn't handled correctly yet
-		 * FIXME.
-		 */
-
-		if (!(hcd->driver->flags & HCD_USB3))
-			udev->speed = USB_SPEED_UNKNOWN;
-		else if ((hdev->parent == NULL) &&
-				(portstatus & USB_PORT_STAT_SUPER_SPEED))
+		/* Only USB 3.0 devices are connected to SuperSpeed hubs. */
+		if (hub_is_superspeed(hub->hdev))
 			udev->speed = USB_SPEED_SUPER;
 		else
 			udev->speed = USB_SPEED_UNKNOWN;
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 770f84cb7327..a78f2ebd11b7 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -155,8 +155,6 @@ static unsigned int xhci_port_speed(unsigned int port_status)
 		return USB_PORT_STAT_LOW_SPEED;
 	if (DEV_HIGHSPEED(port_status))
 		return USB_PORT_STAT_HIGH_SPEED;
-	if (DEV_SUPERSPEED(port_status))
-		return USB_PORT_STAT_SUPER_SPEED;
 	/*
 	 * FIXME: Yes, we should check for full speed, but the core uses that as
 	 * a default in portspeed() in usb/core/hub.c (which is the only place