Merge tag 'usb-serial-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next

Johan writes:

USB-serial updates for v3.19-rc1

These changes add a new "simple" driver for Google USB-serial
devices and add support for Huawei Gobi modems to qcserial.

Included are also some removals of unnecessary atomic allocations and
a few spelling fixes.

Signed-off-by: Johan Hovold <johan@kernel.org>

7 files changed, 59 insertions, 15 deletions

diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index a69f7cd9d0bf..b7cf1982d1d9 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -60,6 +60,7 @@ config USB_SERIAL_SIMPLE
 		- Suunto ANT+ USB device.
 		- Medtronic CareLink USB device
 		- Fundamental Software dongle.
+		- Google USB serial devices
 		- HP4x calculators
 		- a number of Motorola phones
 		- Novatel Wireless GPS receivers
@@ -606,10 +607,10 @@ config USB_SERIAL_CYBERJACK
 	  If unsure, say N.
 
 config USB_SERIAL_XIRCOM
-	tristate "USB Xircom / Entregra Single Port Serial Driver"
+	tristate "USB Xircom / Entrega Single Port Serial Driver"
 	select USB_EZUSB_FX2
 	help
-	  Say Y here if you want to use a Xircom or Entregra single port USB to
+	  Say Y here if you want to use a Xircom or Entrega single port USB to
 	  serial converter device.  This driver makes use of firmware
 	  developed from scratch by Brian Warner.
 
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 742d827f876c..dd97d8b572c3 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -1,5 +1,5 @@
 /*
- * USB Keyspan PDA / Xircom / Entregra Converter driver
+ * USB Keyspan PDA / Xircom / Entrega Converter driver
  *
  * Copyright (C) 1999 - 2001 Greg Kroah-Hartman	<greg@kroah.com>
  * Copyright (C) 1999, 2000 Brian Warner	<warner@lothar.com>
@@ -58,11 +58,11 @@ struct keyspan_pda_private {
 #define KEYSPAN_PDA_FAKE_ID		0x0103
 #define KEYSPAN_PDA_ID			0x0104 /* no clue */
 
-/* For Xircom PGSDB9 and older Entregra version of the same device */
+/* For Xircom PGSDB9 and older Entrega version of the same device */
 #define XIRCOM_VENDOR_ID		0x085a
 #define XIRCOM_FAKE_ID			0x8027
-#define ENTREGRA_VENDOR_ID		0x1645
-#define ENTREGRA_FAKE_ID		0x8093
+#define ENTREGA_VENDOR_ID		0x1645
+#define ENTREGA_FAKE_ID			0x8093
 
 static const struct usb_device_id id_table_combined[] = {
 #ifdef KEYSPAN
@@ -70,7 +70,7 @@ static const struct usb_device_id id_table_combined[] = {
 #endif
 #ifdef XIRCOM
 	{ USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) },
-	{ USB_DEVICE(ENTREGRA_VENDOR_ID, ENTREGRA_FAKE_ID) },
+	{ USB_DEVICE(ENTREGA_VENDOR_ID, ENTREGA_FAKE_ID) },
 #endif
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_ID) },
 	{ }						/* Terminating entry */
@@ -93,7 +93,7 @@ static const struct usb_device_id id_table_fake[] = {
 #ifdef XIRCOM
 static const struct usb_device_id id_table_fake_xircom[] = {
 	{ USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) },
-	{ USB_DEVICE(ENTREGRA_VENDOR_ID, ENTREGRA_FAKE_ID) },
+	{ USB_DEVICE(ENTREGA_VENDOR_ID, ENTREGA_FAKE_ID) },
 	{ }
 };
 #endif
@@ -667,7 +667,7 @@ static int keyspan_pda_fake_startup(struct usb_serial *serial)
 #endif
 #ifdef XIRCOM
 	else if ((le16_to_cpu(serial->dev->descriptor.idVendor) == XIRCOM_VENDOR_ID) ||
-		 (le16_to_cpu(serial->dev->descriptor.idVendor) == ENTREGRA_VENDOR_ID))
+		 (le16_to_cpu(serial->dev->descriptor.idVendor) == ENTREGA_VENDOR_ID))
 		fw_name = "keyspan_pda/xircom_pgs.fw";
 #endif
 	else {
@@ -744,7 +744,7 @@ static struct usb_serial_driver xircom_pgs_fake_device = {
 		.owner =	THIS_MODULE,
 		.name =		"xircom_no_firm",
 	},
-	.description =		"Xircom / Entregra PGS - (prerenumeration)",
+	.description =		"Xircom / Entrega PGS - (prerenumeration)",
 	.id_table =		id_table_fake_xircom,
 	.num_ports =		1,
 	.attach =		keyspan_pda_fake_startup,
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 02c420af251e..2363654cafc9 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -244,7 +244,7 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port)
 	    priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID ||
 	    priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) {
 		/* start reading (Adapter B 'cause PNP string) */
-		result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
+		result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 		dev_dbg(dev, "%s - Send read URB returns: %i\n", __func__, result);
 	}
 
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index dfd728a263d2..312b0fee8d54 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1657,7 +1657,7 @@ static void change_port_settings(struct tty_struct *tty,
 	write_mos_reg(serial, port_number, IER, 0x0c);
 
 	if (port->read_urb->status != -EINPROGRESS) {
-		status = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+		status = usb_submit_urb(port->read_urb, GFP_KERNEL);
 		if (status)
 			dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n", status);
 	}
@@ -1702,7 +1702,7 @@ static void mos7720_set_termios(struct tty_struct *tty,
 	change_port_settings(tty, mos7720_port, old_termios);
 
 	if (port->read_urb->status != -EINPROGRESS) {
-		status = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+		status = usb_submit_urb(port->read_urb, GFP_KERNEL);
 		if (status)
 			dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n", status);
 	}
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 3d88eefdf1d1..220b4be89641 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1904,7 +1904,7 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
 
 	if (mos7840_port->read_urb_busy == false) {
 		mos7840_port->read_urb_busy = true;
-		status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
+		status = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL);
 		if (status) {
 			dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n",
 			    status);
@@ -1968,7 +1968,7 @@ static void mos7840_set_termios(struct tty_struct *tty,
 
 	if (mos7840_port->read_urb_busy == false) {
 		mos7840_port->read_urb_busy = true;
-		status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
+		status = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL);
 		if (status) {
 			dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n",
 			    status);
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index b2aa003bf411..cb3e14780a7e 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -27,12 +27,15 @@ enum qcserial_layouts {
 	QCSERIAL_G2K = 0,	/* Gobi 2000 */
 	QCSERIAL_G1K = 1,	/* Gobi 1000 */
 	QCSERIAL_SWI = 2,	/* Sierra Wireless */
+	QCSERIAL_HWI = 3,	/* Huawei */
 };
 
 #define DEVICE_G1K(v, p) \
 	USB_DEVICE(v, p), .driver_info = QCSERIAL_G1K
 #define DEVICE_SWI(v, p) \
 	USB_DEVICE(v, p), .driver_info = QCSERIAL_SWI
+#define DEVICE_HWI(v, p) \
+	USB_DEVICE(v, p), .driver_info = QCSERIAL_HWI
 
 static const struct usb_device_id id_table[] = {
 	/* Gobi 1000 devices */
@@ -157,6 +160,9 @@ static const struct usb_device_id id_table[] = {
 	{DEVICE_SWI(0x413c, 0x81a8)},	/* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card */
 	{DEVICE_SWI(0x413c, 0x81a9)},	/* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card */
 
+	/* Huawei devices */
+	{DEVICE_HWI(0x03f0, 0x581d)},	/* HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) */
+
 	{ }				/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, id_table);
@@ -287,6 +293,33 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 			break;
 		}
 		break;
+	case QCSERIAL_HWI:
+		/*
+		 * Huawei layout:
+		 * 0: AT-capable modem port
+		 * 1: DM/DIAG
+		 * 2: AT-capable modem port
+		 * 3: CCID-compatible PCSC interface
+		 * 4: QMI/net
+		 * 5: NMEA
+		 */
+		switch (ifnum) {
+		case 0:
+		case 2:
+			dev_dbg(dev, "Modem port found\n");
+			break;
+		case 1:
+			dev_dbg(dev, "DM/DIAG interface found\n");
+			break;
+		case 5:
+			dev_dbg(dev, "NMEA GPS interface found\n");
+			break;
+		default:
+			/* don't claim any unsupported interface */
+			altsetting = -1;
+			break;
+		}
+		break;
 	default:
 		dev_err(dev, "unsupported device layout type: %lu\n",
 			id->driver_info);
diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c
index 7064eb8d6142..bc310112eae9 100644
--- a/drivers/usb/serial/usb-serial-simple.c
+++ b/drivers/usb/serial/usb-serial-simple.c
@@ -56,6 +56,14 @@ DEVICE(funsoft, FUNSOFT_IDS);
 	{ USB_DEVICE(0x8087, 0x0716) }
 DEVICE(flashloader, FLASHLOADER_IDS);
 
+/* Google Serial USB SubClass */
+#define GOOGLE_IDS()						\
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x18d1,			\
+					USB_CLASS_VENDOR_SPEC,	\
+					0x50,			\
+					0x01) }
+DEVICE(google, GOOGLE_IDS);
+
 /* ViVOpay USB Serial Driver */
 #define VIVOPAY_IDS()			\
 	{ USB_DEVICE(0x1d5f, 0x1004) }	/* ViVOpay 8800 */
@@ -97,6 +105,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&zio_device,
 	&funsoft_device,
 	&flashloader_device,
+	&google_device,
 	&vivopay_device,
 	&moto_modem_device,
 	&novatel_gps_device,
@@ -111,6 +120,7 @@ static const struct usb_device_id id_table[] = {
 	ZIO_IDS(),
 	FUNSOFT_IDS(),
 	FLASHLOADER_IDS(),
+	GOOGLE_IDS(),
 	VIVOPAY_IDS(),
 	MOTO_IDS(),
 	NOVATEL_IDS(),