usb-storage: prepare for subdriver separation

This patch (as1206) is the first step in converting usb-storage's
subdrivers into separate modules.  It makes the following large-scale
changes:

	Remove a bunch of unnecessary #ifdef's from usb_usual.h.
	Not truly necessary, but it does clean things up.

	Move the USB device-ID table (which is duplicated between
	libusual and usb-storage) into its own source file,
	usual-tables.c, and arrange for this to be linked with
	either libusual or usb-storage according to whether
	USB_LIBUSUAL is configured.

	Add to usual-tables.c a new usb_usual_ignore_device()
	function to detect whether a particular device needs to be
	managed by a subdriver and not by the standard handlers
	in usb-storage.

	Export a whole bunch of functions in usb-storage, renaming
	some of them because their names don't already begin with
	"usb_stor_".  These functions will be needed by the new
	subdriver modules.

	Split usb-storage's probe routine into two functions.
	The subdrivers will call the probe1 routine, then fill in
	their transport and protocol settings, and then call the
	probe2 routine.

	Take the default cases and error checking out of
	get_transport() and get_protocol(), which run during
	probe1, and instead put a check for invalid transport
	or protocol values into the probe2 function.

	Add a new probe routine to be used for standard devices,
	i.e., those that don't need a subdriver.  This new routine
	checks whether the device should be ignored (because it
	should be handled by ub or by a subdriver), and if not,
	calls the probe1 and probe2 functions.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 files changed, 256 insertions, 133 deletions

diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
index b32069313390..a9e475e127a5 100644
--- a/drivers/usb/storage/Makefile
+++ b/drivers/usb/storage/Makefile
@@ -25,6 +25,8 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += cypress_atacb.o
 usb-storage-objs :=	scsiglue.o protocol.o transport.o usb.o \
 			initializers.o sierra_ms.o option_ms.o $(usb-storage-obj-y)
 
-ifneq ($(CONFIG_USB_LIBUSUAL),)
-	obj-$(CONFIG_USB)	+= libusual.o
+ifeq ($(CONFIG_USB_LIBUSUAL),)
+	usb-storage-objs	+= usual-tables.o
+else
+	obj-$(CONFIG_USB)	+= libusual.o usual-tables.o
 endif
diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c
index f970b27ba308..fe3ffe1459b2 100644
--- a/drivers/usb/storage/libusual.c
+++ b/drivers/usb/storage/libusual.c
@@ -38,37 +38,6 @@ static atomic_t total_threads = ATOMIC_INIT(0);
 static int usu_probe_thread(void *arg);
 
 /*
- * The table.
- */
-#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
-		    vendorName, productName,useProtocol, useTransport, \
-		    initFunction, flags) \
-{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \
-  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
-
-#define COMPLIANT_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
-		    vendorName, productName, useProtocol, useTransport, \
-		    initFunction, flags) \
-{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
-  .driver_info = (flags) }
-
-#define USUAL_DEV(useProto, useTrans, useType) \
-{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \
-  .driver_info = ((useType)<<24) }
-
-struct usb_device_id storage_usb_ids [] = {
-#	include "unusual_devs.h"
-	{ } /* Terminating entry */
-};
-
-#undef USUAL_DEV
-#undef UNUSUAL_DEV
-#undef COMPLIANT_DEV
-
-MODULE_DEVICE_TABLE(usb, storage_usb_ids);
-EXPORT_SYMBOL_GPL(storage_usb_ids);
-
-/*
  * @type: the module type as an integer
  */
 void usb_usual_set_present(int type)
@@ -167,7 +136,7 @@ static struct usb_driver usu_driver = {
 	.name =		"libusual",
 	.probe =	usu_probe,
 	.disconnect =	usu_disconnect,
-	.id_table =	storage_usb_ids,
+	.id_table =	usb_storage_usb_ids,
 };
 
 /*
diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c
index be441d84bc64..fc310f75eada 100644
--- a/drivers/usb/storage/protocol.c
+++ b/drivers/usb/storage/protocol.c
@@ -121,6 +121,7 @@ void usb_stor_transparent_scsi_command(struct scsi_cmnd *srb,
 	/* send the command to the transport layer */
 	usb_stor_invoke_transport(srb, us);
 }
+EXPORT_SYMBOL_GPL(usb_stor_transparent_scsi_command);
 
 /***********************************************************************
  * Scatter-gather transfer buffer access routines
@@ -199,6 +200,7 @@ unsigned int usb_stor_access_xfer_buf(unsigned char *buffer,
 	/* Return the amount actually transferred */
 	return cnt;
 }
+EXPORT_SYMBOL_GPL(usb_stor_access_xfer_buf);
 
 /* Store the contents of buffer into srb's transfer buffer and set the
  * SCSI residue.
@@ -215,3 +217,4 @@ void usb_stor_set_xfer_buf(unsigned char *buffer,
 	if (buflen < scsi_bufflen(srb))
 		scsi_set_resid(srb, scsi_bufflen(srb) - buflen);
 }
+EXPORT_SYMBOL_GPL(usb_stor_set_xfer_buf);
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index ed710bcdaab2..4ca3b5860643 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -569,4 +569,4 @@ unsigned char usb_stor_sense_invalidCDB[18] = {
 	[7]	= 0x0a,			    /* additional length */
 	[12]	= 0x24			    /* Invalid Field in CDB */
 };
-
+EXPORT_SYMBOL_GPL(usb_stor_sense_invalidCDB);
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index fb65d221cedf..d48c8553539d 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -220,6 +220,7 @@ int usb_stor_control_msg(struct us_data *us, unsigned int pipe,
 		status = us->current_urb->actual_length;
 	return status;
 }
+EXPORT_SYMBOL_GPL(usb_stor_control_msg);
 
 /* This is a version of usb_clear_halt() that allows early termination and
  * doesn't read the status from the device -- this is because some devices
@@ -254,6 +255,7 @@ int usb_stor_clear_halt(struct us_data *us, unsigned int pipe)
 	US_DEBUGP("%s: result = %d\n", __func__, result);
 	return result;
 }
+EXPORT_SYMBOL_GPL(usb_stor_clear_halt);
 
 
 /*
@@ -352,6 +354,7 @@ int usb_stor_ctrl_transfer(struct us_data *us, unsigned int pipe,
 	return interpret_urb_result(us, pipe, size, result,
 			us->current_urb->actual_length);
 }
+EXPORT_SYMBOL_GPL(usb_stor_ctrl_transfer);
 
 /*
  * Receive one interrupt buffer, without timeouts, but allowing early
@@ -407,6 +410,7 @@ int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe,
 	return interpret_urb_result(us, pipe, length, result, 
 			us->current_urb->actual_length);
 }
+EXPORT_SYMBOL_GPL(usb_stor_bulk_transfer_buf);
 
 /*
  * Transfer a scatter-gather list via bulk transfer
@@ -474,6 +478,7 @@ int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe,
 	scsi_set_resid(srb, scsi_bufflen(srb) - partial);
 	return result;
 }
+EXPORT_SYMBOL_GPL(usb_stor_bulk_srb);
 
 /*
  * Transfer an entire SCSI command's worth of data payload over the bulk
@@ -509,6 +514,7 @@ int usb_stor_bulk_transfer_sg(struct us_data* us, unsigned int pipe,
 		*residual = length_left;
 	return result;
 }
+EXPORT_SYMBOL_GPL(usb_stor_bulk_transfer_sg);
 
 /***********************************************************************
  * Transport routines
@@ -940,6 +946,7 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
 		usb_stor_clear_halt(us, pipe);
 	return USB_STOR_TRANSPORT_FAILED;
 }
+EXPORT_SYMBOL_GPL(usb_stor_CB_transport);
 
 /*
  * Bulk only transport
@@ -1156,6 +1163,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
 	/* we should never get here, but if we do, we're in trouble */
 	return USB_STOR_TRANSPORT_ERROR;
 }
+EXPORT_SYMBOL_GPL(usb_stor_Bulk_transport);
 
 /***********************************************************************
  * Reset routines
@@ -1230,6 +1238,7 @@ int usb_stor_CB_reset(struct us_data *us)
 				 USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 				 0, us->ifnum, us->iobuf, CB_RESET_CMD_SIZE);
 }
+EXPORT_SYMBOL_GPL(usb_stor_CB_reset);
 
 /* This issues a Bulk-only Reset to the device in question, including
  * clearing the subsequent endpoint halts that may occur.
@@ -1242,6 +1251,7 @@ int usb_stor_Bulk_reset(struct us_data *us)
 				 USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 				 0, us->ifnum, NULL, 0);
 }
+EXPORT_SYMBOL_GPL(usb_stor_Bulk_reset);
 
 /* Issue a USB port reset to the device.  The caller must not hold
  * us->dev_mutex.
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index b01dade63cb3..490ea761398c 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -5,7 +5,7 @@
  *
  * Developed with the assistance of:
  *   (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
- *   (c) 2003 Alan Stern (stern@rowland.harvard.edu)
+ *   (c) 2003-2009 Alan Stern (stern@rowland.harvard.edu)
  *
  * Initial work by:
  *   (c) 1999 Michael Gee (michael@linuxspecific.com)
@@ -118,36 +118,8 @@ MODULE_PARM_DESC(quirks, "supplemental list of device IDs and their quirks");
 
 /*
  * The entries in this table correspond, line for line,
- * with the entries of us_unusual_dev_list[].
+ * with the entries in usb_storage_usb_ids[], defined in usual-tables.c.
  */
-#ifndef CONFIG_USB_LIBUSUAL
-
-#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
-		    vendorName, productName,useProtocol, useTransport, \
-		    initFunction, flags) \
-{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \
-  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
-
-#define COMPLIANT_DEV	UNUSUAL_DEV
-
-#define USUAL_DEV(useProto, useTrans, useType) \
-{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \
-  .driver_info = (USB_US_TYPE_STOR<<24) }
-
-static struct usb_device_id storage_usb_ids [] = {
-
-#	include "unusual_devs.h"
-#undef UNUSUAL_DEV
-#undef COMPLIANT_DEV
-#undef USUAL_DEV
-	/* Terminating entry */
-	{ }
-};
-
-MODULE_DEVICE_TABLE (usb, storage_usb_ids);
-#endif /* CONFIG_USB_LIBUSUAL */
-
-/* This is the list of devices we recognize, along with their flag data */
 
 /* The vendor name should be kept at eight characters or less, and
  * the product name should be kept at 16 characters or less. If a device
@@ -179,18 +151,17 @@ MODULE_DEVICE_TABLE (usb, storage_usb_ids);
 
 static struct us_unusual_dev us_unusual_dev_list[] = {
 #	include "unusual_devs.h" 
-#	undef UNUSUAL_DEV
-#	undef COMPLIANT_DEV
-#	undef USUAL_DEV
-
-	/* Terminating entry */
-	{ NULL }
+	{ }		/* Terminating entry */
 };
 
+#undef UNUSUAL_DEV
+#undef COMPLIANT_DEV
+#undef USUAL_DEV
+
 
 #ifdef CONFIG_PM	/* Minimal support for suspend and resume */
 
-static int storage_suspend(struct usb_interface *iface, pm_message_t message)
+int usb_stor_suspend(struct usb_interface *iface, pm_message_t message)
 {
 	struct us_data *us = usb_get_intfdata(iface);
 
@@ -207,8 +178,9 @@ static int storage_suspend(struct usb_interface *iface, pm_message_t message)
 	mutex_unlock(&us->dev_mutex);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(usb_stor_suspend);
 
-static int storage_resume(struct usb_interface *iface)
+int usb_stor_resume(struct usb_interface *iface)
 {
 	struct us_data *us = usb_get_intfdata(iface);
 
@@ -221,8 +193,9 @@ static int storage_resume(struct usb_interface *iface)
 	mutex_unlock(&us->dev_mutex);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(usb_stor_resume);
 
-static int storage_reset_resume(struct usb_interface *iface)
+int usb_stor_reset_resume(struct usb_interface *iface)
 {
 	struct us_data *us = usb_get_intfdata(iface);
 
@@ -235,6 +208,7 @@ static int storage_reset_resume(struct usb_interface *iface)
 	 * the device */
 	return 0;
 }
+EXPORT_SYMBOL_GPL(usb_stor_reset_resume);
 
 #endif /* CONFIG_PM */
 
@@ -243,7 +217,7 @@ static int storage_reset_resume(struct usb_interface *iface)
  * a USB port reset, whether from this driver or a different one.
  */
 
-static int storage_pre_reset(struct usb_interface *iface)
+int usb_stor_pre_reset(struct usb_interface *iface)
 {
 	struct us_data *us = usb_get_intfdata(iface);
 
@@ -253,8 +227,9 @@ static int storage_pre_reset(struct usb_interface *iface)
 	mutex_lock(&us->dev_mutex);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(usb_stor_pre_reset);
 
-static int storage_post_reset(struct usb_interface *iface)
+int usb_stor_post_reset(struct usb_interface *iface)
 {
 	struct us_data *us = usb_get_intfdata(iface);
 
@@ -269,6 +244,7 @@ static int storage_post_reset(struct usb_interface *iface)
 	mutex_unlock(&us->dev_mutex);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(usb_stor_post_reset);
 
 /*
  * fill_inquiry_response takes an unsigned char array (which must
@@ -311,6 +287,7 @@ void fill_inquiry_response(struct us_data *us, unsigned char *data,
 
 	usb_stor_set_xfer_buf(data, data_len, us->srb);
 }
+EXPORT_SYMBOL_GPL(fill_inquiry_response);
 
 static int usb_stor_control_thread(void * __us)
 {
@@ -551,20 +528,13 @@ static void adjust_quirks(struct us_data *us)
 			vid, pid, f);
 }
 
-/* Find an unusual_dev descriptor (always succeeds in the current code) */
-static struct us_unusual_dev *find_unusual(const struct usb_device_id *id)
-{
-	const int id_index = id - storage_usb_ids;
-	return &us_unusual_dev_list[id_index];
-}
-
 /* Get the unusual_devs entries and the string descriptors */
-static int get_device_info(struct us_data *us, const struct usb_device_id *id)
+static int get_device_info(struct us_data *us, const struct usb_device_id *id,
+		struct us_unusual_dev *unusual_dev)
 {
 	struct usb_device *dev = us->pusb_dev;
 	struct usb_interface_descriptor *idesc =
 		&us->pusb_intf->cur_altsetting->desc;
-	struct us_unusual_dev *unusual_dev = find_unusual(id);
 
 	/* Store the entries */
 	us->unusual_dev = unusual_dev;
@@ -629,7 +599,7 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id)
 }
 
 /* Get the transport settings */
-static int get_transport(struct us_data *us)
+static void get_transport(struct us_data *us)
 {
 	switch (us->protocol) {
 	case US_PR_CB:
@@ -732,19 +702,11 @@ static int get_transport(struct us_data *us)
 		break;
 #endif
 
-	default:
-		return -EIO;
 	}
-	US_DEBUGP("Transport: %s\n", us->transport_name);
-
-	/* fix for single-lun devices */
-	if (us->fflags & US_FL_SINGLE_LUN)
-		us->max_lun = 0;
-	return 0;
 }
 
 /* Get the protocol settings */
-static int get_protocol(struct us_data *us)
+static void get_protocol(struct us_data *us)
 {
 	switch (us->subclass) {
 	case US_SC_RBC:
@@ -794,11 +756,7 @@ static int get_protocol(struct us_data *us)
 		break;
 #endif
 
-	default:
-		return -EIO;
 	}
-	US_DEBUGP("Protocol: %s\n", us->protocol_name);
-	return 0;
 }
 
 /* Get the pipe settings */
@@ -1012,17 +970,15 @@ static int usb_stor_scan_thread(void * __us)
 }
 
 
-/* Probe to see if we can drive a newly-connected USB device */
-static int storage_probe(struct usb_interface *intf,
-			 const struct usb_device_id *id)
+/* First part of general USB mass-storage probing */
+int usb_stor_probe1(struct us_data **pus,
+		struct usb_interface *intf,
+		const struct usb_device_id *id,
+		struct us_unusual_dev *unusual_dev)
 {
 	struct Scsi_Host *host;
 	struct us_data *us;
 	int result;
-	struct task_struct *th;
-
-	if (usb_usual_check_type(id, USB_US_TYPE_STOR))
-		return -ENXIO;
 
 	US_DEBUGP("USB Mass Storage device detected\n");
 
@@ -1041,7 +997,7 @@ static int storage_probe(struct usb_interface *intf,
 	 * Allow 16-byte CDBs and thus > 2TB
 	 */
 	host->max_cmd_len = 16;
-	us = host_to_us(host);
+	*pus = us = host_to_us(host);
 	memset(us, 0, sizeof(struct us_data));
 	mutex_init(&(us->dev_mutex));
 	init_completion(&us->cmnd_ready);
@@ -1054,24 +1010,46 @@ static int storage_probe(struct usb_interface *intf,
 	if (result)
 		goto BadDevice;
 
-	/*
-	 * Get the unusual_devs entries and the descriptors
-	 *
-	 * id_index is calculated in the declaration to be the index number
-	 * of the match from the usb_device_id table, so we can find the
-	 * corresponding entry in the private table.
-	 */
-	result = get_device_info(us, id);
+	/* Get the unusual_devs entries and the descriptors */
+	result = get_device_info(us, id, unusual_dev);
 	if (result)
 		goto BadDevice;
 
-	/* Get the transport, protocol, and pipe settings */
-	result = get_transport(us);
-	if (result)
-		goto BadDevice;
-	result = get_protocol(us);
-	if (result)
+	/* Get standard transport and protocol settings */
+	get_transport(us);
+	get_protocol(us);
+
+	/* Give the caller a chance to fill in specialized transport
+	 * or protocol settings.
+	 */
+	return 0;
+
+BadDevice:
+	US_DEBUGP("storage_probe() failed\n");
+	release_everything(us);
+	return result;
+}
+EXPORT_SYMBOL_GPL(usb_stor_probe1);
+
+/* Second part of general USB mass-storage probing */
+int usb_stor_probe2(struct us_data *us)
+{
+	struct task_struct *th;
+	int result;
+
+	/* Make sure the transport and protocol have both been set */
+	if (!us->transport || !us->proto_handler) {
+		result = -ENXIO;
 		goto BadDevice;
+	}
+	US_DEBUGP("Transport: %s\n", us->transport_name);
+	US_DEBUGP("Protocol: %s\n", us->protocol_name);
+
+	/* fix for single-lun devices */
+	if (us->fflags & US_FL_SINGLE_LUN)
+		us->max_lun = 0;
+
+	/* Find the endpoints and calculate pipe values */
 	result = get_pipes(us);
 	if (result)
 		goto BadDevice;
@@ -1080,7 +1058,7 @@ static int storage_probe(struct usb_interface *intf,
 	result = usb_stor_acquire_resources(us);
 	if (result)
 		goto BadDevice;
-	result = scsi_add_host(host, &intf->dev);
+	result = scsi_add_host(us_to_host(us), &us->pusb_intf->dev);
 	if (result) {
 		printk(KERN_WARNING USB_STORAGE
 			"Unable to add the scsi host\n");
@@ -1108,9 +1086,10 @@ BadDevice:
 	release_everything(us);
 	return result;
 }
+EXPORT_SYMBOL_GPL(usb_stor_probe2);
 
-/* Handle a disconnect event from the USB core */
-static void storage_disconnect(struct usb_interface *intf)
+/* Handle a USB mass-storage disconnect */
+void usb_stor_disconnect(struct usb_interface *intf)
 {
 	struct us_data *us = usb_get_intfdata(intf);
 
@@ -1118,6 +1097,42 @@ static void storage_disconnect(struct usb_interface *intf)
 	quiesce_and_remove_host(us);
 	release_everything(us);
 }
+EXPORT_SYMBOL_GPL(usb_stor_disconnect);
+
+/* The main probe routine for standard devices */
+static int storage_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	/*
+	 * If libusual is configured, let it decide whether a standard
+	 * device should be handled by usb-storage or by ub.
+	 * If the device isn't standard (is handled by a subdriver
+	 * module) then don't accept it.
+	 */
+	if (usb_usual_check_type(id, USB_US_TYPE_STOR) ||
+			usb_usual_ignore_device(intf))
+		return -ENXIO;
+
+	/*
+	 * Call the general probe procedures.
+	 *
+	 * The unusual_dev_list array is parallel to the usb_storage_usb_ids
+	 * table, so we use the index of the id entry to find the
+	 * corresponding unusual_devs entry.
+	 */
+	result = usb_stor_probe1(&us, intf, id,
+			(id - usb_storage_usb_ids) + us_unusual_dev_list);
+	if (result)
+		return result;
+
+	/* No special transport or protocol settings in the main module */
+
+	result = usb_stor_probe2(us);
+	return result;
+}
 
 /***********************************************************************
  * Initialization and registration
@@ -1126,15 +1141,13 @@ static void storage_disconnect(struct usb_interface *intf)
 static struct usb_driver usb_storage_driver = {
 	.name =		"usb-storage",
 	.probe =	storage_probe,
-	.disconnect =	storage_disconnect,
-#ifdef CONFIG_PM
-	.suspend =	storage_suspend,
-	.resume =	storage_resume,
-	.reset_resume =	storage_reset_resume,
-#endif
-	.pre_reset =	storage_pre_reset,
-	.post_reset =	storage_post_reset,
-	.id_table =	storage_usb_ids,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	usb_storage_usb_ids,
 	.soft_unbind =	1,
 };
 
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 65e674e4be99..2609efb2bd7e 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -177,4 +177,25 @@ extern void fill_inquiry_response(struct us_data *us,
 #define scsi_unlock(host)	spin_unlock_irq(host->host_lock)
 #define scsi_lock(host)		spin_lock_irq(host->host_lock)
 
+/* General routines provided by the usb-storage standard core */
+#ifdef CONFIG_PM
+extern int usb_stor_suspend(struct usb_interface *iface, pm_message_t message);
+extern int usb_stor_resume(struct usb_interface *iface);
+extern int usb_stor_reset_resume(struct usb_interface *iface);
+#else
+#define usb_stor_suspend	NULL
+#define usb_stor_resume		NULL
+#define usb_stor_reset_resume	NULL
+#endif
+
+extern int usb_stor_pre_reset(struct usb_interface *iface);
+extern int usb_stor_post_reset(struct usb_interface *iface);
+
+extern int usb_stor_probe1(struct us_data **pus,
+		struct usb_interface *intf,
+		const struct usb_device_id *id,
+		struct us_unusual_dev *unusual_dev);
+extern int usb_stor_probe2(struct us_data *us);
+extern void usb_stor_disconnect(struct usb_interface *intf);
+
 #endif
diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c
new file mode 100644
index 000000000000..1924e3229409
--- /dev/null
+++ b/drivers/usb/storage/usual-tables.c
@@ -0,0 +1,105 @@
+/* Driver for USB Mass Storage devices
+ * Usual Tables File for usb-storage and libusual
+ *
+ * Copyright (C) 2009 Alan Stern (stern@rowland.harvard.edu)
+ *
+ * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
+ * information about this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb_usual.h>
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+#define COMPLIANT_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags) }
+
+#define USUAL_DEV(useProto, useTrans, useType) \
+{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \
+  .driver_info = ((useType)<<24) }
+
+struct usb_device_id usb_storage_usb_ids[] = {
+#	include "unusual_devs.h"
+	{ }		/* Terminating entry */
+};
+EXPORT_SYMBOL_GPL(usb_storage_usb_ids);
+
+MODULE_DEVICE_TABLE(usb, usb_storage_usb_ids);
+
+#undef UNUSUAL_DEV
+#undef COMPLIANT_DEV
+#undef USUAL_DEV
+
+
+/*
+ * The table of devices to ignore
+ */
+struct ignore_entry {
+	u16	vid, pid, bcdmin, bcdmax;
+};
+
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{					\
+	.vid	= id_vendor,		\
+	.pid 	= id_product,		\
+	.bcdmin	= bcdDeviceMin,		\
+	.bcdmax = bcdDeviceMax,		\
+}
+
+static struct ignore_entry ignore_ids[] = {
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
+/* Return an error if a device is in the ignore_ids list */
+int usb_usual_ignore_device(struct usb_interface *intf)
+{
+	struct usb_device *udev;
+	unsigned vid, pid, bcd;
+	struct ignore_entry *p;
+
+	udev = interface_to_usbdev(intf);
+	vid = le16_to_cpu(udev->descriptor.idVendor);
+	pid = le16_to_cpu(udev->descriptor.idProduct);
+	bcd = le16_to_cpu(udev->descriptor.bcdDevice);
+
+	for (p = ignore_ids; p->vid; ++p) {
+		if (p->vid == vid && p->pid == pid &&
+				p->bcdmin <= bcd && p->bcdmax >= bcd)
+			return -ENXIO;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_usual_ignore_device);