summaryrefslogtreecommitdiffstats
path: root/drivers/usb/storage
diff options
context:
space:
mode:
authorFelipe Balbi <felipe.balbi@linux.intel.com>2016-04-18 13:09:11 +0300
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2016-04-26 15:04:38 -0700
commitf0183a338e4f90e59a4b4daa10cba0fae8e3fca7 (patch)
treea68b5c6a0074dca1802e2287c2244f21514842ba /drivers/usb/storage
parent5b91dfe187bbe3a8116432016375f39fff91a237 (diff)
downloadlinux-f0183a338e4f90e59a4b4daa10cba0fae8e3fca7.tar.bz2
usb: storage: fix multi-line comment style
No functional changes here, just making sure our storage driver uses a consistent multi-line comment style. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/storage')
-rw-r--r--drivers/usb/storage/alauda.c22
-rw-r--r--drivers/usb/storage/cypress_atacb.c34
-rw-r--r--drivers/usb/storage/datafab.c22
-rw-r--r--drivers/usb/storage/debug.c3
-rw-r--r--drivers/usb/storage/debug.h3
-rw-r--r--drivers/usb/storage/ene_ub6250.c25
-rw-r--r--drivers/usb/storage/freecom.c75
-rw-r--r--drivers/usb/storage/initializers.c15
-rw-r--r--drivers/usb/storage/initializers.h15
-rw-r--r--drivers/usb/storage/isd200.c51
-rw-r--r--drivers/usb/storage/jumpshot.c22
-rw-r--r--drivers/usb/storage/karma.c3
-rw-r--r--drivers/usb/storage/option_ms.c6
-rw-r--r--drivers/usb/storage/protocol.c12
-rw-r--r--drivers/usb/storage/protocol.h3
-rw-r--r--drivers/usb/storage/realtek_cr.c12
-rw-r--r--drivers/usb/storage/scsiglue.c147
-rw-r--r--drivers/usb/storage/scsiglue.h3
-rw-r--r--drivers/usb/storage/sddr09.c82
-rw-r--r--drivers/usb/storage/sddr55.c45
-rw-r--r--drivers/usb/storage/shuttle_usbat.c16
-rw-r--r--drivers/usb/storage/sierra_ms.c3
-rw-r--r--drivers/usb/storage/transport.c165
-rw-r--r--drivers/usb/storage/transport.h3
-rw-r--r--drivers/usb/storage/uas.c3
-rw-r--r--drivers/usb/storage/unusual_alauda.h3
-rw-r--r--drivers/usb/storage/unusual_cypress.h3
-rw-r--r--drivers/usb/storage/unusual_datafab.h6
-rw-r--r--drivers/usb/storage/unusual_devs.h334
-rw-r--r--drivers/usb/storage/unusual_freecom.h3
-rw-r--r--drivers/usb/storage/unusual_isd200.h3
-rw-r--r--drivers/usb/storage/unusual_jumpshot.h3
-rw-r--r--drivers/usb/storage/unusual_karma.h3
-rw-r--r--drivers/usb/storage/unusual_onetouch.h6
-rw-r--r--drivers/usb/storage/unusual_realtek.h3
-rw-r--r--drivers/usb/storage/unusual_sddr09.h3
-rw-r--r--drivers/usb/storage/unusual_sddr55.h3
-rw-r--r--drivers/usb/storage/unusual_uas.h3
-rw-r--r--drivers/usb/storage/unusual_usbat.h3
-rw-r--r--drivers/usb/storage/usb.c98
-rw-r--r--drivers/usb/storage/usb.h14
-rw-r--r--drivers/usb/storage/usual-tables.c3
42 files changed, 829 insertions, 455 deletions
diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c
index 171fa7d793bc..1d8b03c81030 100644
--- a/drivers/usb/storage/alauda.c
+++ b/drivers/usb/storage/alauda.c
@@ -829,8 +829,10 @@ static int alauda_write_lba(struct us_data *us, u16 lba,
pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset];
if (pba == 1) {
- /* Maybe it is impossible to write to PBA 1.
- Fake success, but don't do anything. */
+ /*
+ * Maybe it is impossible to write to PBA 1.
+ * Fake success, but don't do anything.
+ */
printk(KERN_WARNING
"alauda_write_lba: avoid writing to pba 1\n");
return USB_STOR_TRANSPORT_GOOD;
@@ -977,10 +979,12 @@ static int alauda_read_data(struct us_data *us, unsigned long address,
usb_stor_dbg(us, "Read %d zero pages (LBA %d) page %d\n",
pages, lba, page);
- /* This is not really an error. It just means
- that the block has never been written.
- Instead of returning USB_STOR_TRANSPORT_ERROR
- it is better to return all zero data. */
+ /*
+ * This is not really an error. It just means
+ * that the block has never been written.
+ * Instead of returning USB_STOR_TRANSPORT_ERROR
+ * it is better to return all zero data.
+ */
memset(buffer, 0, len);
} else {
@@ -1222,8 +1226,10 @@ static int alauda_transport(struct scsi_cmnd *srb, struct us_data *us)
}
if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
- /* sure. whatever. not like we can stop the user from popping
- the media out of the device (no locking doors, etc) */
+ /*
+ * sure. whatever. not like we can stop the user from popping
+ * the media out of the device (no locking doors, etc)
+ */
return USB_STOR_TRANSPORT_GOOD;
}
diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c
index c80d3dec9a34..5e4af44d7d9f 100644
--- a/drivers/usb/storage/cypress_atacb.c
+++ b/drivers/usb/storage/cypress_atacb.c
@@ -110,13 +110,17 @@ static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
/* first build the ATACB command */
srb->cmd_len = 16;
- srb->cmnd[0] = 0x24; /* bVSCBSignature : vendor-specific command
- this value can change, but most(all ?) manufacturers
- keep the cypress default : 0x24 */
+ srb->cmnd[0] = 0x24; /*
+ * bVSCBSignature : vendor-specific command
+ * this value can change, but most(all ?) manufacturers
+ * keep the cypress default : 0x24
+ */
srb->cmnd[1] = 0x24; /* bVSCBSubCommand : 0x24 for ATACB */
- srb->cmnd[3] = 0xff - 1; /* features, sector count, lba low, lba med
- lba high, device, command are valid */
+ srb->cmnd[3] = 0xff - 1; /*
+ * features, sector count, lba low, lba med
+ * lba high, device, command are valid
+ */
srb->cmnd[4] = 1; /* TransferBlockCount : 512 */
if (save_cmnd[0] == ATA_16) {
@@ -155,8 +159,7 @@ static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
usb_stor_transparent_scsi_command(srb, us);
- /* if the device doesn't support ATACB
- */
+ /* if the device doesn't support ATACB */
if (srb->result == SAM_STAT_CHECK_CONDITION &&
memcmp(srb->sense_buffer, usb_stor_sense_invalidCDB,
sizeof(usb_stor_sense_invalidCDB)) == 0) {
@@ -164,7 +167,8 @@ static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
goto end;
}
- /* if ck_cond flags is set, and there wasn't critical error,
+ /*
+ * if ck_cond flags is set, and there wasn't critical error,
* build the special sense
*/
if ((srb->result != (DID_ERROR << 16) &&
@@ -176,11 +180,11 @@ static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
unsigned char *desc = sb + 8;
int tmp_result;
- /* build the command for
- * reading the ATA registers */
+ /* build the command for reading the ATA registers */
scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sizeof(regs));
- /* we use the same command as before, but we set
+ /*
+ * we use the same command as before, but we set
* the read taskfile bit, for not executing atacb command,
* but reading register selected in srb->cmnd[4]
*/
@@ -204,10 +208,11 @@ static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
sb[2] = 0; /* ATA PASS THROUGH INFORMATION AVAILABLE */
sb[3] = 0x1D;
- /* XXX we should generate sk, asc, ascq from status and error
+ /*
+ * XXX we should generate sk, asc, ascq from status and error
* regs
* (see 11.1 Error translation ATA device error to SCSI error
- * map, and ata_to_sense_error from libata.)
+ * map, and ata_to_sense_error from libata.)
*/
/* Sense data is current and format is descriptor. */
@@ -258,7 +263,8 @@ static int cypress_probe(struct usb_interface *intf,
if (result)
return result;
- /* Among CY7C68300 chips, the A revision does not support Cypress ATACB
+ /*
+ * Among CY7C68300 chips, the A revision does not support Cypress ATACB
* Filter out this revision from EEPROM default descriptor values
*/
device = interface_to_usbdev(intf);
diff --git a/drivers/usb/storage/datafab.c b/drivers/usb/storage/datafab.c
index aa4f51944a4a..723197af6ec5 100644
--- a/drivers/usb/storage/datafab.c
+++ b/drivers/usb/storage/datafab.c
@@ -1,4 +1,5 @@
-/* Driver for Datafab USB Compact Flash reader
+/*
+ * Driver for Datafab USB Compact Flash reader
*
* datafab driver v0.1:
*
@@ -693,18 +694,23 @@ static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us)
}
if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
- // sure. whatever. not like we can stop the user from
- // popping the media out of the device (no locking doors, etc)
- //
+ /*
+ * sure. whatever. not like we can stop the user from
+ * popping the media out of the device (no locking doors, etc)
+ */
return USB_STOR_TRANSPORT_GOOD;
}
if (srb->cmnd[0] == START_STOP) {
- /* this is used by sd.c'check_scsidisk_media_change to detect
- media change */
+ /*
+ * this is used by sd.c'check_scsidisk_media_change to detect
+ * media change
+ */
usb_stor_dbg(us, "START_STOP\n");
- /* the first datafab_id_device after a media change returns
- an error (determined experimentally) */
+ /*
+ * the first datafab_id_device after a media change returns
+ * an error (determined experimentally)
+ */
rc = datafab_id_device(us, info);
if (rc == USB_STOR_TRANSPORT_GOOD) {
info->sense_key = NO_SENSE;
diff --git a/drivers/usb/storage/debug.c b/drivers/usb/storage/debug.c
index 5a12c03138f8..8d20804a59e6 100644
--- a/drivers/usb/storage/debug.c
+++ b/drivers/usb/storage/debug.c
@@ -1,4 +1,5 @@
-/* Driver for USB Mass Storage compliant devices
+/*
+ * Driver for USB Mass Storage compliant devices
* Debugging Functions Source Code File
*
* Current development and maintenance by:
diff --git a/drivers/usb/storage/debug.h b/drivers/usb/storage/debug.h
index 6b365ce4e610..8ab73299b650 100644
--- a/drivers/usb/storage/debug.h
+++ b/drivers/usb/storage/debug.h
@@ -1,4 +1,5 @@
-/* Driver for USB Mass Storage compliant devices
+/*
+ * Driver for USB Mass Storage compliant devices
* Debugging Functions Header File
*
* Current development and maintenance by:
diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c
index d3a17c65a702..02bdaa912164 100644
--- a/drivers/usb/storage/ene_ub6250.c
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -560,8 +560,10 @@ static int ene_send_scsi_cmd(struct us_data *us, u8 fDir, void *buf, int use_sg)
/* check bulk status */
residue = le32_to_cpu(bcs->Residue);
- /* try to compute the actual residue, based on how much data
- * was really transferred and what the device tells us */
+ /*
+ * try to compute the actual residue, based on how much data
+ * was really transferred and what the device tells us
+ */
if (residue && !(us->fflags & US_FL_IGNORE_RESIDUE)) {
residue = min(residue, transfer_length);
if (us->srb != NULL)
@@ -862,9 +864,6 @@ static int ms_read_readpage(struct us_data *us, u32 PhyBlockAddr,
u8 ExtBuf[4];
u32 bn = PhyBlockAddr * 0x20 + PageNum;
- /* printk(KERN_INFO "MS --- MS_ReaderReadPage,
- PhyBlockAddr = %x, PageNum = %x\n", PhyBlockAddr, PageNum); */
-
result = ene_load_bincode(us, MS_RW_PATTERN);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
@@ -1141,8 +1140,6 @@ static int ms_read_copyblock(struct us_data *us, u16 oldphy, u16 newphy,
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
int result;
- /* printk(KERN_INFO "MS_ReaderCopyBlock --- PhyBlockAddr = %x,
- PageNum = %x\n", PhyBlockAddr, PageNum); */
result = ene_load_bincode(us, MS_RW_PATTERN);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
@@ -1176,8 +1173,6 @@ static int ms_read_eraseblock(struct us_data *us, u32 PhyBlockAddr)
int result;
u32 bn = PhyBlockAddr;
- /* printk(KERN_INFO "MS --- ms_read_eraseblock,
- PhyBlockAddr = %x\n", PhyBlockAddr); */
result = ene_load_bincode(us, MS_RW_PATTERN);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
@@ -1255,8 +1250,6 @@ static int ms_lib_overwrite_extra(struct us_data *us, u32 PhyBlockAddr,
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
int result;
- /* printk("MS --- MS_LibOverwriteExtra,
- PhyBlockAddr = %x, PageNum = %x\n", PhyBlockAddr, PageNum); */
result = ene_load_bincode(us, MS_RW_PATTERN);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
@@ -1342,7 +1335,6 @@ static int ms_lib_read_extra(struct us_data *us, u32 PhyBlock,
int result;
u8 ExtBuf[4];
- /* printk("MS_LibReadExtra --- PhyBlock = %x, PageNum = %x\n", PhyBlock, PageNum); */
memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = 0x4;
@@ -1541,9 +1533,6 @@ static int ms_lib_read_extrablock(struct us_data *us, u32 PhyBlock,
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
int result;
- /* printk("MS_LibReadExtraBlock --- PhyBlock = %x,
- PageNum = %x, blen = %x\n", PhyBlock, PageNum, blen); */
-
/* Read Extra Data */
memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
@@ -2390,8 +2379,10 @@ static int ene_ub6250_reset_resume(struct usb_interface *iface)
/* Report the reset to the SCSI core */
usb_stor_reset_resume(iface);
- /* FIXME: Notify the subdrivers that they need to reinitialize
- * the device */
+ /*
+ * FIXME: Notify the subdrivers that they need to reinitialize
+ * the device
+ */
info->Power_IsResum = true;
/*info->SD_Status.Ready = 0; */
info->SD_Status = *(struct SD_STATUS *)&tmp;
diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c
index 3f2b08966b9d..c0a5d954414b 100644
--- a/drivers/usb/storage/freecom.c
+++ b/drivers/usb/storage/freecom.c
@@ -1,4 +1,5 @@
-/* Driver for Freecom USB/IDE adaptor
+/*
+ * Driver for Freecom USB/IDE adaptor
*
* Freecom v0.1:
*
@@ -84,25 +85,33 @@ struct freecom_status {
u8 Pad[60];
};
-/* Freecom stuffs the interrupt status in the INDEX_STAT bit of the ide
- * register. */
+/*
+ * Freecom stuffs the interrupt status in the INDEX_STAT bit of the ide
+ * register.
+ */
#define FCM_INT_STATUS 0x02 /* INDEX_STAT */
#define FCM_STATUS_BUSY 0x80
-/* These are the packet types. The low bit indicates that this command
- * should wait for an interrupt. */
+/*
+ * These are the packet types. The low bit indicates that this command
+ * should wait for an interrupt.
+ */
#define FCM_PACKET_ATAPI 0x21
#define FCM_PACKET_STATUS 0x20
-/* Receive data from the IDE interface. The ATAPI packet has already
- * waited, so the data should be immediately available. */
+/*
+ * Receive data from the IDE interface. The ATAPI packet has already
+ * waited, so the data should be immediately available.
+ */
#define FCM_PACKET_INPUT 0x81
/* Send data to the IDE interface. */
#define FCM_PACKET_OUTPUT 0x01
-/* Write a value to an ide register. Or the ide register to write after
- * munging the address a bit. */
+/*
+ * Write a value to an ide register. Or the ide register to write after
+ * munging the address a bit.
+ */
#define FCM_PACKET_IDE_WRITE 0x40
#define FCM_PACKET_IDE_READ 0xC0
@@ -251,16 +260,20 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
result = usb_stor_bulk_transfer_buf (us, opipe, fcb,
FCM_PACKET_LENGTH, NULL);
- /* The Freecom device will only fail if there is something wrong in
+ /*
+ * The Freecom device will only fail if there is something wrong in
* USB land. It returns the status in its own registers, which
- * come back in the bulk pipe. */
+ * come back in the bulk pipe.
+ */
if (result != USB_STOR_XFER_GOOD) {
usb_stor_dbg(us, "freecom transport error\n");
return USB_STOR_TRANSPORT_ERROR;
}
- /* There are times we can optimize out this status read, but it
- * doesn't hurt us to always do it now. */
+ /*
+ * There are times we can optimize out this status read, but it
+ * doesn't hurt us to always do it now.
+ */
result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
FCM_STATUS_PACKET_LENGTH, &partial);
usb_stor_dbg(us, "foo Status result %d %u\n", result, partial);
@@ -269,7 +282,8 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
US_DEBUG(pdump(us, (void *)fst, partial));
- /* The firmware will time-out commands after 20 seconds. Some commands
+ /*
+ * The firmware will time-out commands after 20 seconds. Some commands
* can legitimately take longer than this, so we use a different
* command that only waits for the interrupt and then sends status,
* without having to send a new ATAPI command to the device.
@@ -291,7 +305,8 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
result = usb_stor_bulk_transfer_buf (us, opipe, fcb,
FCM_PACKET_LENGTH, NULL);
- /* The Freecom device will only fail if there is something
+ /*
+ * The Freecom device will only fail if there is something
* wrong in USB land. It returns the status in its own
* registers, which come back in the bulk pipe.
*/
@@ -318,9 +333,11 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
return USB_STOR_TRANSPORT_FAILED;
}
- /* The device might not have as much data available as we
+ /*
+ * The device might not have as much data available as we
* requested. If you ask for more than the device has, this reads
- * and such will hang. */
+ * and such will hang.
+ */
usb_stor_dbg(us, "Device indicates that it has %d bytes available\n",
le16_to_cpu(fst->Count));
usb_stor_dbg(us, "SCSI requested %d\n", scsi_bufflen(srb));
@@ -344,16 +361,20 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
length);
}
- /* What we do now depends on what direction the data is supposed to
- * move in. */
+ /*
+ * What we do now depends on what direction the data is supposed to
+ * move in.
+ */
switch (us->srb->sc_data_direction) {
case DMA_FROM_DEVICE:
/* catch bogus "read 0 length" case */
if (!length)
break;
- /* Make sure that the status indicates that the device
- * wants data as well. */
+ /*
+ * Make sure that the status indicates that the device
+ * wants data as well.
+ */
if ((fst->Status & DRQ_STAT) == 0 || (fst->Reason & 3) != 2) {
usb_stor_dbg(us, "SCSI wants data, drive doesn't have any\n");
return USB_STOR_TRANSPORT_FAILED;
@@ -384,8 +405,10 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
/* catch bogus "write 0 length" case */
if (!length)
break;
- /* Make sure the status indicates that the device wants to
- * send us data. */
+ /*
+ * Make sure the status indicates that the device wants to
+ * send us data.
+ */
/* !!IMPLEMENT!! */
result = freecom_writedata (srb, us, ipipe, opipe, length);
if (result != USB_STOR_TRANSPORT_GOOD)
@@ -431,7 +454,8 @@ static int init_freecom(struct us_data *us)
int result;
char *buffer = us->iobuf;
- /* The DMA-mapped I/O buffer is 64 bytes long, just right for
+ /*
+ * The DMA-mapped I/O buffer is 64 bytes long, just right for
* all our packets. No need to allocate any extra buffer space.
*/
@@ -440,7 +464,8 @@ static int init_freecom(struct us_data *us)
buffer[32] = '\0';
usb_stor_dbg(us, "String returned from FC init is: %s\n", buffer);
- /* Special thanks to the people at Freecom for providing me with
+ /*
+ * Special thanks to the people at Freecom for providing me with
* this "magic sequence", which they use in their Windows and MacOS
* drivers to make sure that all the attached perhiperals are
* properly reset.
diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index 31fa2e92065b..d9d8c17e05d1 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -1,4 +1,5 @@
-/* Special Initializers for certain USB Mass Storage devices
+/*
+ * Special Initializers for certain USB Mass Storage devices
*
* Current development and maintenance by:
* (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
@@ -42,8 +43,10 @@
#include "debug.h"
#include "transport.h"
-/* This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target
- * mode */
+/*
+ * This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target
+ * mode
+ */
int usb_stor_euscsi_init(struct us_data *us)
{
int result;
@@ -57,8 +60,10 @@ int usb_stor_euscsi_init(struct us_data *us)
return 0;
}
-/* This function is required to activate all four slots on the UCR-61S2B
- * flash reader */
+/*
+ * This function is required to activate all four slots on the UCR-61S2B
+ * flash reader
+ */
int usb_stor_ucr61s2b_init(struct us_data *us)
{
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap*) us->iobuf;
diff --git a/drivers/usb/storage/initializers.h b/drivers/usb/storage/initializers.h
index 529327fbb06b..039abf4d1cb7 100644
--- a/drivers/usb/storage/initializers.h
+++ b/drivers/usb/storage/initializers.h
@@ -1,4 +1,5 @@
-/* Header file for Special Initializers for certain USB Mass Storage devices
+/*
+ * Header file for Special Initializers for certain USB Mass Storage devices
*
* Current development and maintenance by:
* (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
@@ -38,12 +39,16 @@
#include "usb.h"
#include "transport.h"
-/* This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target
- * mode */
+/*
+ * This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target
+ * mode
+ */
int usb_stor_euscsi_init(struct us_data *us);
-/* This function is required to activate all four slots on the UCR-61S2B
- * flash reader */
+/*
+ * This function is required to activate all four slots on the UCR-61S2B
+ * flash reader
+ */
int usb_stor_ucr61s2b_init(struct us_data *us);
/* This places the HUAWEI E220 devices in multi-port mode */
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index 39afd7045c43..fba4005dd737 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -1,4 +1,5 @@
-/* Transport & Protocol Driver for In-System Design, Inc. ISD200 ASIC
+/*
+ * Transport & Protocol Driver for In-System Design, Inc. ISD200 ASIC
*
* Current development and maintenance:
* (C) 2001-2002 Björn Stenberg (bjorn@haxx.se)
@@ -628,7 +629,8 @@ static void isd200_invoke_transport( struct us_data *us,
srb->cmd_len = sizeof(ataCdb->generic);
transferStatus = usb_stor_Bulk_transport(srb, us);
- /* if the command gets aborted by the higher layers, we need to
+ /*
+ * if the command gets aborted by the higher layers, we need to
* short-circuit all other processing
*/
if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
@@ -695,15 +697,18 @@ static void isd200_invoke_transport( struct us_data *us,
}
}
- /* Regardless of auto-sense, if we _know_ we have an error
+ /*
+ * Regardless of auto-sense, if we _know_ we have an error
* condition, show that in the result code
*/
if (transferStatus == USB_STOR_TRANSPORT_FAILED)
srb->result = SAM_STAT_CHECK_CONDITION;
return;
- /* abort processing: the bulk-only transport requires a reset
- * following an abort */
+ /*
+ * abort processing: the bulk-only transport requires a reset
+ * following an abort
+ */
Handle_Abort:
srb->result = DID_ABORT << 16;
@@ -965,20 +970,22 @@ static int isd200_try_enum(struct us_data *us, unsigned char master_slave,
info->DeviceHead = master_slave;
break;
}
- /* check Cylinder High/Low to
- determine if it is an ATAPI device
- */
+ /*
+ * check Cylinder High/Low to
+ * determine if it is an ATAPI device
+ */
else if (regs[ATA_REG_HCYL_OFFSET] == 0xEB &&
regs[ATA_REG_LCYL_OFFSET] == 0x14) {
- /* It seems that the RICOH
- MP6200A CD/RW drive will
- report itself okay as a
- slave when it is really a
- master. So this check again
- as a master device just to
- make sure it doesn't report
- itself okay as a master also
- */
+ /*
+ * It seems that the RICOH
+ * MP6200A CD/RW drive will
+ * report itself okay as a
+ * slave when it is really a
+ * master. So this check again
+ * as a master device just to
+ * make sure it doesn't report
+ * itself okay as a master also
+ */
if ((master_slave & ATA_ADDRESS_DEVHEAD_SLAVE) &&
!recheckAsMaster) {
usb_stor_dbg(us, " Identified ATAPI device as slave. Rechecking again as master\n");
@@ -1176,9 +1183,11 @@ static int isd200_get_inquiry_data( struct us_data *us )
if (id[ATA_ID_COMMAND_SET_2] & COMMANDSET_MEDIA_STATUS) {
usb_stor_dbg(us, " Device supports Media Status Notification\n");
- /* Indicate that it is enabled, even though it is not
- * This allows the lock/unlock of the media to work
- * correctly.
+ /*
+ * Indicate that it is enabled, even
+ * though it is not.
+ * This allows the lock/unlock of the
+ * media to work correctly.
*/
info->DeviceFlags |= DF_MEDIA_STATUS_ENABLED;
}
@@ -1197,7 +1206,7 @@ static int isd200_get_inquiry_data( struct us_data *us )
usb_stor_dbg(us, "Protocol changed to: %s\n",
us->protocol_name);
- /* Free driver structure */
+ /* Free driver structure */
us->extra_destructor(info);
kfree(info);
us->extra = NULL;
diff --git a/drivers/usb/storage/jumpshot.c b/drivers/usb/storage/jumpshot.c
index ee613e258db0..011e5270690a 100644
--- a/drivers/usb/storage/jumpshot.c
+++ b/drivers/usb/storage/jumpshot.c
@@ -1,4 +1,5 @@
-/* Driver for Lexar "Jumpshot" Compact Flash reader
+/*
+ * Driver for Lexar "Jumpshot" Compact Flash reader
*
* jumpshot driver v0.1:
*
@@ -618,18 +619,23 @@ static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us)
}
if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
- // sure. whatever. not like we can stop the user from popping
- // the media out of the device (no locking doors, etc)
- //
+ /*
+ * sure. whatever. not like we can stop the user from popping
+ * the media out of the device (no locking doors, etc)
+ */
return USB_STOR_TRANSPORT_GOOD;
}
if (srb->cmnd[0] == START_STOP) {
- /* this is used by sd.c'check_scsidisk_media_change to detect
- media change */
+ /*
+ * this is used by sd.c'check_scsidisk_media_change to detect
+ * media change
+ */
usb_stor_dbg(us, "START_STOP\n");
- /* the first jumpshot_id_device after a media change returns
- an error (determined experimentally) */
+ /*
+ * the first jumpshot_id_device after a media change returns
+ * an error (determined experimentally)
+ */
rc = jumpshot_id_device(us, info);
if (rc == USB_STOR_TRANSPORT_GOOD) {
info->sense_key = NO_SENSE;
diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c
index ae201e69475c..f9d407f0b508 100644
--- a/drivers/usb/storage/karma.c
+++ b/drivers/usb/storage/karma.c
@@ -1,4 +1,5 @@
-/* Driver for Rio Karma
+/*
+ * Driver for Rio Karma
*
* (c) 2006 Bob Copeland <me@bobcopeland.com>
* (c) 2006 Keith Bennett <keith@mcs.st-and.ac.uk>
diff --git a/drivers/usb/storage/option_ms.c b/drivers/usb/storage/option_ms.c
index b2b35b1d7de8..57282f12317b 100644
--- a/drivers/usb/storage/option_ms.c
+++ b/drivers/usb/storage/option_ms.c
@@ -65,7 +65,8 @@ static int option_rezero(struct us_data *us)
goto out;
}
- /* Some of the devices need to be asked for a response, but we don't
+ /*
+ * Some of the devices need to be asked for a response, but we don't
* care what that response is.
*/
usb_stor_bulk_transfer_buf(us,
@@ -140,7 +141,8 @@ int option_ms_init(struct us_data *us)
usb_stor_dbg(us, "Option MS: %s\n", "option_ms_init called");
- /* Additional test for vendor information via INQUIRY,
+ /*
+ * Additional test for vendor information via INQUIRY,
* because some vendor/product IDs are ambiguous
*/
result = option_inquiry(us);
diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c
index 12e3c2fac642..74c38870a17e 100644
--- a/drivers/usb/storage/protocol.c
+++ b/drivers/usb/storage/protocol.c
@@ -1,4 +1,5 @@
-/* Driver for USB Mass Storage compliant devices
+/*
+ * Driver for USB Mass Storage compliant devices
*
* Current development and maintenance by:
* (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
@@ -75,7 +76,8 @@ void usb_stor_pad12_command(struct scsi_cmnd *srb, struct us_data *us)
void usb_stor_ufi_command(struct scsi_cmnd *srb, struct us_data *us)
{
- /* fix some commands -- this is a form of mode translation
+ /*
+ * fix some commands -- this is a form of mode translation
* UFI devices only accept 12 byte long commands
*
* NOTE: This only works because a scsi_cmnd struct field contains
@@ -127,7 +129,8 @@ EXPORT_SYMBOL_GPL(usb_stor_transparent_scsi_command);
* Scatter-gather transfer buffer access routines
***********************************************************************/
-/* Copy a buffer of length buflen to/from the srb's transfer buffer.
+/*
+ * Copy a buffer of length buflen to/from the srb's transfer buffer.
* Update the **sgptr and *offset variables so that the next copy will
* pick up from where this one left off.
*/
@@ -175,7 +178,8 @@ unsigned int usb_stor_access_xfer_buf(unsigned char *buffer,
}
EXPORT_SYMBOL_GPL(usb_stor_access_xfer_buf);
-/* Store the contents of buffer into srb's transfer buffer and set the
+/*
+ * Store the contents of buffer into srb's transfer buffer and set the
* SCSI residue.
*/
void usb_stor_set_xfer_buf(unsigned char *buffer,
diff --git a/drivers/usb/storage/protocol.h b/drivers/usb/storage/protocol.h
index ffc3e2af0156..a55666880b7b 100644
--- a/drivers/usb/storage/protocol.h
+++ b/drivers/usb/storage/protocol.h
@@ -1,4 +1,5 @@
-/* Driver for USB Mass Storage compliant devices
+/*
+ * Driver for USB Mass Storage compliant devices
* Protocol Functions Header File
*
* Current development and maintenance by:
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index 20433563a601..4176d1af9bf2 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -1,4 +1,5 @@
-/* Driver for Realtek RTS51xx USB card reader
+/*
+ * Driver for Realtek RTS51xx USB card reader
*
* Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
*
@@ -267,8 +268,10 @@ static int rts51x_bulk_transport(struct us_data *us, u8 lun,
if (bcs->Tag != us->tag)
return USB_STOR_TRANSPORT_ERROR;
- /* try to compute the actual residue, based on how much data
- * was really transferred and what the device tells us */
+ /*
+ * try to compute the actual residue, based on how much data
+ * was really transferred and what the device tells us
+ */
if (residue)
residue = residue < buf_len ? residue : buf_len;
@@ -286,7 +289,8 @@ static int rts51x_bulk_transport(struct us_data *us, u8 lun,
return USB_STOR_TRANSPORT_FAILED;
case US_BULK_STAT_PHASE:
- /* phase error -- note that a transport reset will be
+ /*
+ * phase error -- note that a transport reset will be
* invoked by the invoke_transport() function
*/
return USB_STOR_TRANSPORT_ERROR;
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 88920142e375..7adb6c9c7018 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -1,4 +1,5 @@
-/* Driver for USB Mass Storage compliant devices
+/*
+ * Driver for USB Mass Storage compliant devices
* SCSI layer glue code
*
* Current development and maintenance by:
@@ -58,7 +59,8 @@
#include "transport.h"
#include "protocol.h"
-/* Vendor IDs for companies that seem to include the READ CAPACITY bug
+/*
+ * Vendor IDs for companies that seem to include the READ CAPACITY bug
* in all their devices
*/
#define VENDOR_ID_NOKIA 0x0421
@@ -87,7 +89,8 @@ static int slave_alloc (struct scsi_device *sdev)
*/
sdev->inquiry_len = 36;
- /* USB has unusual DMA-alignment requirements: Although the
+ /*
+ * USB has unusual DMA-alignment requirements: Although the
* starting address of each scatter-gather element doesn't matter,
* the length of each element except the last must be divisible
* by the Bulk maxpacket value. There's currently no way to
@@ -115,7 +118,8 @@ static int slave_configure(struct scsi_device *sdev)
{
struct us_data *us = host_to_us(sdev->host);
- /* Many devices have trouble transferring more than 32KB at a time,
+ /*
+ * Many devices have trouble transferring more than 32KB at a time,
* while others have trouble with more than 64K. At this time we
* are limiting both to 32K (64 sectores).
*/
@@ -128,19 +132,22 @@ static int slave_configure(struct scsi_device *sdev)
blk_queue_max_hw_sectors(sdev->request_queue,
max_sectors);
} else if (sdev->type == TYPE_TAPE) {
- /* Tapes need much higher max_sector limits, so just
+ /*
+ * Tapes need much higher max_sector limits, so just
* raise it to the maximum possible (4 GB / 512) and
* let the queue segment size sort out the real limit.
*/
blk_queue_max_hw_sectors(sdev->request_queue, 0x7FFFFF);
} else if (us->pusb_dev->speed >= USB_SPEED_SUPER) {
- /* USB3 devices will be limited to 2048 sectors. This gives us
+ /*
+ * USB3 devices will be limited to 2048 sectors. This gives us
* better throughput on most devices.
*/
blk_queue_max_hw_sectors(sdev->request_queue, 2048);
}
- /* Some USB host controllers can't do DMA; they have to use PIO.
+ /*
+ * Some USB host controllers can't do DMA; they have to use PIO.
* They indicate this by setting their dma_mask to NULL. For
* such controllers we need to make sure the block layer sets
* up bounce buffers in addressable memory.
@@ -148,17 +155,21 @@ static int slave_configure(struct scsi_device *sdev)
if (!us->pusb_dev->bus->controller->dma_mask)
blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_HIGH);
- /* We can't put these settings in slave_alloc() because that gets
+ /*
+ * We can't put these settings in slave_alloc() because that gets
* called before the device type is known. Consequently these
- * settings can't be overridden via the scsi devinfo mechanism. */
+ * settings can't be overridden via the scsi devinfo mechanism.
+ */
if (sdev->type == TYPE_DISK) {
- /* Some vendors seem to put the READ CAPACITY bug into
+ /*
+ * Some vendors seem to put the READ CAPACITY bug into
* all their devices -- primarily makers of cell phones
* and digital cameras. Since these devices always use
* flash media and can be expected to have an even number
* of sectors, we will always enable the CAPACITY_HEURISTICS
- * flag unless told otherwise. */
+ * flag unless told otherwise.
+ */
switch (le16_to_cpu(us->pusb_dev->descriptor.idVendor)) {
case VENDOR_ID_NOKIA:
case VENDOR_ID_NIKON:
@@ -170,28 +181,36 @@ static int slave_configure(struct scsi_device *sdev)
break;
}
- /* Disk-type devices use MODE SENSE(6) if the protocol
+ /*
+ * Disk-type devices use MODE SENSE(6) if the protocol
* (SubClass) is Transparent SCSI, otherwise they use
- * MODE SENSE(10). */
+ * MODE SENSE(10).
+ */
if (us->subclass != USB_SC_SCSI && us->subclass != USB_SC_CYP_ATACB)
sdev->use_10_for_ms = 1;
- /* Many disks only accept MODE SENSE transfer lengths of
- * 192 bytes (that's what Windows uses). */
+ /*
+ *Many disks only accept MODE SENSE transfer lengths of
+ * 192 bytes (that's what Windows uses).
+ */
sdev->use_192_bytes_for_3f = 1;
- /* Some devices don't like MODE SENSE with page=0x3f,
+ /*
+ * Some devices don't like MODE SENSE with page=0x3f,
* which is the command used for checking if a device
* is write-protected. Now that we tell the sd driver
* to do a 192-byte transfer with this command the
* majority of devices work fine, but a few still can't
* handle it. The sd driver will simply assume those
- * devices are write-enabled. */
+ * devices are write-enabled.
+ */
if (us->fflags & US_FL_NO_WP_DETECT)
sdev->skip_ms_page_3f = 1;
- /* A number of devices have problems with MODE SENSE for
- * page x08, so we will skip it. */
+ /*
+ * A number of devices have problems with MODE SENSE for
+ * page x08, so we will skip it.
+ */
sdev->skip_ms_page_8 = 1;
/* Some devices don't handle VPD pages correctly */
@@ -203,15 +222,19 @@ static int slave_configure(struct scsi_device *sdev)
/* Do not attempt to use WRITE SAME */
sdev->no_write_same = 1;
- /* Some disks return the total number of blocks in response
+ /*
+ * Some disks return the total number of blocks in response
* to READ CAPACITY rather than the highest block number.
- * If this device makes that mistake, tell the sd driver. */
+ * If this device makes that mistake, tell the sd driver.
+ */
if (us->fflags & US_FL_FIX_CAPACITY)
sdev->fix_capacity = 1;
- /* A few disks have two indistinguishable version, one of
+ /*
+ * A few disks have two indistinguishable version, one of
* which reports the correct capacity and the other does not.
- * The sd driver has to guess which is the case. */
+ * The sd driver has to guess which is the case.
+ */
if (us->fflags & US_FL_CAPACITY_HEURISTICS)
sdev->guess_capacity = 1;
@@ -232,26 +255,34 @@ static int slave_configure(struct scsi_device *sdev)
if (sdev->scsi_level > SCSI_SPC_2)
us->fflags |= US_FL_SANE_SENSE;
- /* USB-IDE bridges tend to report SK = 0x04 (Non-recoverable
+ /*
+ * USB-IDE bridges tend to report SK = 0x04 (Non-recoverable
* Hardware Error) when any low-level error occurs,
* recoverable or not. Setting this flag tells the SCSI
* midlayer to retry such commands, which frequently will
* succeed and fix the error. The worst this can lead to
- * is an occasional series of retries that will all fail. */
+ * is an occasional series of retries that will all fail.
+ */
sdev->retry_hwerror = 1;
- /* USB disks should allow restart. Some drives spin down
- * automatically, requiring a START-STOP UNIT command. */
+ /*
+ * USB disks should allow restart. Some drives spin down
+ * automatically, requiring a START-STOP UNIT command.
+ */
sdev->allow_restart = 1;
- /* Some USB cardreaders have trouble reading an sdcard's last
+ /*
+ * Some USB cardreaders have trouble reading an sdcard's last
* sector in a larger then 1 sector read, since the performance
- * impact is negligible we set this flag for all USB disks */
+ * impact is negligible we set this flag for all USB disks
+ */
sdev->last_sector_bug = 1;
- /* Enable last-sector hacks for single-target devices using
+ /*
+ * Enable last-sector hacks for single-target devices using
* the Bulk-only transport, unless we already know the
- * capacity will be decremented or is correct. */
+ * capacity will be decremented or is correct.
+ */
if (!(us->fflags & (US_FL_FIX_CAPACITY | US_FL_CAPACITY_OK |
US_FL_SCM_MULT_TARG)) &&
us->protocol == USB_PR_BULK)
@@ -267,9 +298,11 @@ static int slave_configure(struct scsi_device *sdev)
} else {
- /* Non-disk-type devices don't need to blacklist any pages
+ /*
+ * Non-disk-type devices don't need to blacklist any pages
* or to force 192-byte transfer lengths for MODE SENSE.
- * But they do need to use MODE SENSE(10). */
+ * But they do need to use MODE SENSE(10).
+ */
sdev->use_10_for_ms = 1;
/* Some (fake) usb cdrom devices don't like READ_DISC_INFO */
@@ -277,7 +310,8 @@ static int slave_configure(struct scsi_device *sdev)
sdev->no_read_disc_info = 1;
}
- /* The CB and CBI transports have no way to pass LUN values
+ /*
+ * The CB and CBI transports have no way to pass LUN values
* other than the bits in the second byte of a CDB. But those
* bits don't get set to the LUN value if the device reports
* scsi_level == 0 (UNKNOWN). Hence such devices must necessarily
@@ -287,13 +321,17 @@ static int slave_configure(struct scsi_device *sdev)
sdev->scsi_level == SCSI_UNKNOWN)
us->max_lun = 0;
- /* Some devices choke when they receive a PREVENT-ALLOW MEDIUM
- * REMOVAL command, so suppress those commands. */
+ /*
+ * Some devices choke when they receive a PREVENT-ALLOW MEDIUM
+ * REMOVAL command, so suppress those commands.
+ */
if (us->fflags & US_FL_NOT_LOCKABLE)
sdev->lockable = 0;
- /* this is to satisfy the compiler, tho I don't think the
- * return code is ever checked anywhere. */
+ /*
+ * this is to satisfy the compiler, tho I don't think the
+ * return code is ever checked anywhere.
+ */
return 0;
}
@@ -367,8 +405,10 @@ static int command_abort(struct scsi_cmnd *srb)
usb_stor_dbg(us, "%s called\n", __func__);
- /* us->srb together with the TIMED_OUT, RESETTING, and ABORTING
- * bits are protected by the host lock. */
+ /*
+ * us->srb together with the TIMED_OUT, RESETTING, and ABORTING
+ * bits are protected by the host lock.
+ */
scsi_lock(us_to_host(us));
/* Is this command still active? */
@@ -378,11 +418,13 @@ static int command_abort(struct scsi_cmnd *srb)
return FAILED;
}
- /* Set the TIMED_OUT bit. Also set the ABORTING bit, but only if
+ /*
+ * Set the TIMED_OUT bit. Also set the ABORTING bit, but only if
* a device reset isn't already in progress (to avoid interfering
* with the reset). Note that we must retain the host lock while
* calling usb_stor_stop_transport(); otherwise it might interfere
- * with an auto-reset that begins as soon as we release the lock. */
+ * with an auto-reset that begins as soon as we release the lock.
+ */
set_bit(US_FLIDX_TIMED_OUT, &us->dflags);
if (!test_bit(US_FLIDX_RESETTING, &us->dflags)) {
set_bit(US_FLIDX_ABORTING, &us->dflags);
@@ -395,8 +437,10 @@ static int command_abort(struct scsi_cmnd *srb)
return SUCCESS;
}
-/* This invokes the transport reset mechanism to reset the state of the
- * device */
+/*
+ * This invokes the transport reset mechanism to reset the state of the
+ * device
+ */
static int device_reset(struct scsi_cmnd *srb)
{
struct us_data *us = host_to_us(srb->device->host);
@@ -424,9 +468,11 @@ static int bus_reset(struct scsi_cmnd *srb)
return result < 0 ? FAILED : SUCCESS;
}
-/* Report a driver-initiated device reset to the SCSI layer.
+/*
+ * Report a driver-initiated device reset to the SCSI layer.
* Calling this for a SCSI-initiated reset is unnecessary but harmless.
- * The caller must own the SCSI host lock. */
+ * The caller must own the SCSI host lock.
+ */
void usb_stor_report_device_reset(struct us_data *us)
{
int i;
@@ -439,9 +485,11 @@ void usb_stor_report_device_reset(struct us_data *us)
}
}
-/* Report a driver-initiated bus reset to the SCSI layer.
+/*
+ * Report a driver-initiated bus reset to the SCSI layer.
* Calling this for a SCSI-initiated reset is unnecessary but harmless.
- * The caller must not own the SCSI host lock. */
+ * The caller must not own the SCSI host lock.
+ */
void usb_stor_report_bus_reset(struct us_data *us)
{
struct Scsi_Host *host = us_to_host(us);
@@ -590,7 +638,8 @@ static const struct scsi_host_template usb_stor_host_template = {
*/
.max_sectors = 240,
- /* merge commands... this seems to help performance, but
+ /*
+ * merge commands... this seems to help performance, but
* periodically someone should test to see which setting is more
* optimal.
*/
diff --git a/drivers/usb/storage/scsiglue.h b/drivers/usb/storage/scsiglue.h
index 5494d87607fb..d0a331dd9bc5 100644
--- a/drivers/usb/storage/scsiglue.h
+++ b/drivers/usb/storage/scsiglue.h
@@ -1,4 +1,5 @@
-/* Driver for USB Mass Storage compliant devices
+/*
+ * Driver for USB Mass Storage compliant devices
* SCSI Connecting Glue Header File
*
* Current development and maintenance by:
diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c
index 79224fcf9b59..c5797fa2125e 100644
--- a/drivers/usb/storage/sddr09.c
+++ b/drivers/usb/storage/sddr09.c
@@ -1,4 +1,5 @@
-/* Driver for SanDisk SDDR-09 SmartMedia reader
+/*
+ * Driver for SanDisk SDDR-09 SmartMedia reader
*
* (c) 2000, 2001 Robert Baruch (autophile@starband.net)
* (c) 2002 Andries Brouwer (aeb@cwi.nl)
@@ -799,10 +800,12 @@ sddr09_read_data(struct us_data *us,
usb_stor_dbg(us, "Read %d zero pages (LBA %d) page %d\n",
pages, lba, page);
- /* This is not really an error. It just means
- that the block has never been written.
- Instead of returning an error
- it is better to return all zero data. */
+ /*
+ * This is not really an error. It just means
+ * that the block has never been written.
+ * Instead of returning an error
+ * it is better to return all zero data.
+ */
memset(buffer, 0, len);
@@ -890,8 +893,10 @@ sddr09_write_lba(struct us_data *us, unsigned int lba,
}
if (pba == 1) {
- /* Maybe it is impossible to write to PBA 1.
- Fake success, but don't do anything. */
+ /*
+ * Maybe it is impossible to write to PBA 1.
+ * Fake success, but don't do anything.
+ */
printk(KERN_WARNING "sddr09: avoid writing to pba 1\n");
return 0;
}
@@ -979,18 +984,22 @@ sddr09_write_data(struct us_data *us,
struct scatterlist *sg;
int result;
- // Figure out the initial LBA and page
+ /* Figure out the initial LBA and page */
lba = address >> info->blockshift;
page = (address & info->blockmask);
maxlba = info->capacity >> (info->pageshift + info->blockshift);
if (lba >= maxlba)
return -EIO;
- // blockbuffer is used for reading in the old data, overwriting
- // with the new data, and performing ECC calculations
+ /*
+ * blockbuffer is used for reading in the old data, overwriting
+ * with the new data, and performing ECC calculations
+ */
- /* TODO: instead of doing kmalloc/kfree for each write,
- add a bufferpointer to the info structure */
+ /*
+ * TODO: instead of doing kmalloc/kfree for each write,
+ * add a bufferpointer to the info structure
+ */
pagelen = (1 << info->pageshift) + (1 << CONTROL_SHIFT);
blocklen = (pagelen << info->blockshift);
@@ -1000,9 +1009,11 @@ sddr09_write_data(struct us_data *us,
return -ENOMEM;
}
- // Since we don't write the user data directly to the device,
- // we have to create a bounce buffer and move the data a piece
- // at a time between the bounce buffer and the actual transfer buffer.
+ /*
+ * Since we don't write the user data directly to the device,
+ * we have to create a bounce buffer and move the data a piece
+ * at a time between the bounce buffer and the actual transfer buffer.
+ */
len = min(sectors, (unsigned int) info->blocksize) * info->pagesize;
buffer = kmalloc(len, GFP_NOIO);
@@ -1018,7 +1029,7 @@ sddr09_write_data(struct us_data *us,
while (sectors > 0) {
- // Write as many sectors as possible in this block
+ /* Write as many sectors as possible in this block */
pages = min(sectors, info->blocksize - page);
len = (pages << info->pageshift);
@@ -1031,7 +1042,7 @@ sddr09_write_data(struct us_data *us,
break;
}
- // Get the data from the transfer buffer
+ /* Get the data from the transfer buffer */
usb_stor_access_xfer_buf(buffer, len, us->srb,
&sg, &offset, FROM_XFER_BUF);
@@ -1168,9 +1179,11 @@ sddr09_get_cardinfo(struct us_data *us, unsigned char flags) {
/* Byte 1 is the device type */
cardinfo = nand_find_id(deviceID[1]);
if (cardinfo) {
- /* MB or MiB? It is neither. A 16 MB card has
- 17301504 raw bytes, of which 16384000 are
- usable for user data. */
+ /*
+ * MB or MiB? It is neither. A 16 MB card has
+ * 17301504 raw bytes, of which 16384000 are
+ * usable for user data.
+ */
sprintf(blurbtxt + strlen(blurbtxt),
", %d MB", 1<<(cardinfo->chipshift - 20));
} else {
@@ -1211,14 +1224,18 @@ sddr09_read_map(struct us_data *us) {
if (!info->capacity)
return -1;
- // size of a block is 1 << (blockshift + pageshift) bytes
- // divide into the total capacity to get the number of blocks
+ /*
+ * size of a block is 1 << (blockshift + pageshift) bytes
+ * divide into the total capacity to get the number of blocks
+ */
numblocks = info->capacity >> (info->blockshift + info->pageshift);
- // read 64 bytes for every block (actually 1 << CONTROL_SHIFT)
- // but only use a 64 KB buffer
- // buffer size used must be a multiple of (1 << CONTROL_SHIFT)
+ /*
+ * read 64 bytes for every block (actually 1 << CONTROL_SHIFT)
+ * but only use a 64 KB buffer
+ * buffer size used must be a multiple of (1 << CONTROL_SHIFT)
+ */
#define SDDR09_READ_MAP_BUFSZ 65536
alloc_blocks = min(numblocks, SDDR09_READ_MAP_BUFSZ >> CONTROL_SHIFT);
@@ -1575,8 +1592,10 @@ static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
havefakesense = 1;
- /* Dummy up a response for INQUIRY since SDDR09 doesn't
- respond to INQUIRY commands */
+ /*
+ * Dummy up a response for INQUIRY since SDDR09 doesn't
+ * respond to INQUIRY commands
+ */
if (srb->cmnd[0] == INQUIRY) {
memcpy(ptr, inquiry_response, 8);
@@ -1628,8 +1647,10 @@ static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
if (srb->cmnd[0] == MODE_SENSE_10) {
int modepage = (srb->cmnd[2] & 0x3F);
- /* They ask for the Read/Write error recovery page,
- or for all pages. */
+ /*
+ * They ask for the Read/Write error recovery page,
+ * or for all pages.
+ */
/* %% We should check DBD %% */
if (modepage == 0x01 || modepage == 0x3F) {
usb_stor_dbg(us, "Dummy up request for mode page 0x%x\n",
@@ -1682,7 +1703,8 @@ static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
USB_STOR_TRANSPORT_ERROR);
}
- /* catch-all for all other commands, except
+ /*
+ * catch-all for all other commands, except
* pass TEST_UNIT_READY and REQUEST_SENSE through
*/
if (srb->cmnd[0] != TEST_UNIT_READY &&
diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c
index e5e0a25ecd96..147c50b3e00f 100644
--- a/drivers/usb/storage/sddr55.c
+++ b/drivers/usb/storage/sddr55.c
@@ -1,4 +1,5 @@
-/* Driver for SanDisk SDDR-55 SmartMedia reader
+/*
+ * Driver for SanDisk SDDR-55 SmartMedia reader
*
* SDDR55 driver v0.1:
*
@@ -130,7 +131,8 @@ sddr55_bulk_transport(struct us_data *us, int direction,
return usb_stor_bulk_transfer_buf(us, pipe, data, len, NULL);
}
-/* check if card inserted, if there is, update read_only status
+/*
+ * check if card inserted, if there is, update read_only status
* return non zero if no card
*/
@@ -714,15 +716,18 @@ static int sddr55_read_map(struct us_data *us) {
if (max_lba > 1000)
max_lba = 1000;
- // Each block is 64 bytes of control data, so block i is located in
- // scatterlist block i*64/128k = i*(2^6)*(2^-17) = i*(2^-11)
+ /*
+ * Each block is 64 bytes of control data, so block i is located in
+ * scatterlist block i*64/128k = i*(2^6)*(2^-17) = i*(2^-11)
+ */
for (i=0; i<numblocks; i++) {
int zone = i / 1024;
lba = short_pack(buffer[i * 2], buffer[i * 2 + 1]);
- /* Every 1024 physical blocks ("zone"), the LBA numbers
+ /*
+ * Every 1024 physical blocks ("zone"), the LBA numbers
* go back to zero, but are within a higher
* block of LBA's. Also, there is a maximum of
* 1000 LBA's per zone. In other words, in PBA
@@ -733,7 +738,8 @@ static int sddr55_read_map(struct us_data *us) {
* are 24 spare blocks to use when blocks do go bad.
*/
- /* SDDR55 returns 0xffff for a bad block, and 0x400 for the
+ /*
+ * SDDR55 returns 0xffff for a bad block, and 0x400 for the
* CIS block. (Is this true for cards 8MB or less??)
* Record these in the physical to logical map
*/
@@ -824,8 +830,10 @@ static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us)
memset (info->sense_data, 0, sizeof info->sense_data);
- /* Dummy up a response for INQUIRY since SDDR55 doesn't
- respond to INQUIRY commands */
+ /*
+ * Dummy up a response for INQUIRY since SDDR55 doesn't
+ * respond to INQUIRY commands
+ */
if (srb->cmnd[0] == INQUIRY) {
memcpy(ptr, inquiry_response, 8);
@@ -833,7 +841,8 @@ static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us)
return USB_STOR_TRANSPORT_GOOD;
}
- /* only check card status if the map isn't allocated, ie no card seen yet
+ /*
+ * only check card status if the map isn't allocated, ie no card seen yet
* or if it's been over half a second since we last accessed it
*/
if (info->lba_to_pba == NULL || time_after(jiffies, info->last_access + HZ/2)) {
@@ -849,8 +858,10 @@ static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us)
}
}
- /* if we detected a problem with the map when writing,
- don't allow any more access */
+ /*
+ * if we detected a problem with the map when writing,
+ * don't allow any more access
+ */
if (info->fatal_error) {
set_sense_info (3, 0x31, 0);
@@ -868,12 +879,16 @@ static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us)
info->capacity = capacity;
- /* figure out the maximum logical block number, allowing for
- * the fact that only 250 out of every 256 are used */
+ /*
+ * figure out the maximum logical block number, allowing for
+ * the fact that only 250 out of every 256 are used
+ */
info->max_log_blks = ((info->capacity >> (info->pageshift + info->blockshift)) / 256) * 250;
- /* Last page in the card, adjust as we only use 250 out of
- * every 256 pages */
+ /*
+ * Last page in the card, adjust as we only use 250 out of
+ * every 256 pages
+ */
capacity = (capacity / 256) * 250;
capacity /= PAGESIZE;
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index a3ec86b913a1..3b0294e4df93 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -1,4 +1,5 @@
-/* Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable
+/*
+ * Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable
*
* Current development and maintenance by:
* (c) 2000, 2001 Robert Baruch (autophile@starband.net)
@@ -408,7 +409,8 @@ static int usbat_wait_not_busy(struct us_data *us, int minutes)
int result;
unsigned char *status = us->iobuf;
- /* Synchronizing cache on a CDR could take a heck of a long time,
+ /*
+ * Synchronizing cache on a CDR could take a heck of a long time,
* but probably not more than 10 minutes or so. On the other hand,
* doing a full blank on a CDRW at speed 1 will take about 75
* minutes!
@@ -1570,9 +1572,10 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us)
len = scsi_bufflen(srb);
- /* Send A0 (ATA PACKET COMMAND).
- Note: I guess we're never going to get any of the ATA
- commands... just ATA Packet Commands.
+ /*
+ * Send A0 (ATA PACKET COMMAND).
+ * Note: I guess we're never going to get any of the ATA
+ * commands... just ATA Packet Commands.
*/
registers[0] = USBAT_ATA_FEATURES;
@@ -1851,7 +1854,8 @@ static int usbat_probe(struct usb_interface *intf,
if (result)
return result;
- /* The actual transport will be determined later by the
+ /*
+ * The actual transport will be determined later by the
* initialization routine; this is just a placeholder.
*/
us->transport_name = "Shuttle USBAT";
diff --git a/drivers/usb/storage/sierra_ms.c b/drivers/usb/storage/sierra_ms.c
index 2ea657be14c8..9a51019ac7b2 100644
--- a/drivers/usb/storage/sierra_ms.c
+++ b/drivers/usb/storage/sierra_ms.c
@@ -177,7 +177,8 @@ int sierra_ms_init(struct us_data *us)
debug_swoc(&us->pusb_dev->dev, swocInfo);
- /* If there is not Linux software on the TRU-Install device
+ /*
+ * If there is not Linux software on the TRU-Install device
* then switch to modem mode
*/
if (!containsFullLinuxPackage(swocInfo)) {
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 5e67f63b2e46..ffd086733421 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -1,4 +1,5 @@
-/* Driver for USB Mass Storage compliant devices
+/*
+ * Driver for USB Mass Storage compliant devices
*
* Current development and maintenance by:
* (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
@@ -109,7 +110,8 @@
* called more than once or from being called during usb_submit_urb().
*/
-/* This is the completion handler which will wake us up when an URB
+/*
+ * This is the completion handler which will wake us up when an URB
* completes.
*/
static void usb_stor_blocking_completion(struct urb *urb)
@@ -119,7 +121,8 @@ static void usb_stor_blocking_completion(struct urb *urb)
complete(urb_done_ptr);
}
-/* This is the common part of the URB message submission code
+/*
+ * This is the common part of the URB message submission code
*
* All URBs from the usb-storage driver involved in handling a queued scsi
* command _must_ pass through this function (or something like it) for the
@@ -142,10 +145,12 @@ static int usb_stor_msg_common(struct us_data *us, int timeout)
us->current_urb->context = &urb_done;
us->current_urb->transfer_flags = 0;
- /* we assume that if transfer_buffer isn't us->iobuf then it
+ /*
+ * we assume that if transfer_buffer isn't us->iobuf then it
* hasn't been mapped for DMA. Yes, this is clunky, but it's
* easier than always having the caller tell us whether the
- * transfer buffer has already been mapped. */
+ * transfer buffer has already been mapped.
+ */
if (us->current_urb->transfer_buffer == us->iobuf)
us->current_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
us->current_urb->transfer_dma = us->iobuf_dma;
@@ -157,8 +162,10 @@ static int usb_stor_msg_common(struct us_data *us, int timeout)
return status;
}
- /* since the URB has been submitted successfully, it's now okay
- * to cancel it */
+ /*
+ * since the URB has been submitted successfully, it's now okay
+ * to cancel it
+ */
set_bit(US_FLIDX_URB_ACTIVE, &us->dflags);
/* did an abort occur during the submission? */
@@ -220,7 +227,8 @@ int usb_stor_control_msg(struct us_data *us, unsigned int pipe,
}
EXPORT_SYMBOL_GPL(usb_stor_control_msg);
-/* This is a version of usb_clear_halt() that allows early termination and
+/*
+ * This is a version of usb_clear_halt() that allows early termination and
* doesn't read the status from the device -- this is because some devices
* crash their internal firmware when the status is requested after a halt.
*
@@ -280,8 +288,10 @@ static int interpret_urb_result(struct us_data *us, unsigned int pipe,
/* stalled */
case -EPIPE:
- /* for control endpoints, (used by CB[I]) a stall indicates
- * a failed command */
+ /*
+ * for control endpoints, (used by CB[I]) a stall indicates
+ * a failed command
+ */
if (usb_pipecontrol(pipe)) {
usb_stor_dbg(us, "-- stall on control pipe\n");
return USB_STOR_XFER_STALLED;
@@ -433,8 +443,10 @@ static int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe,
return USB_STOR_XFER_ERROR;
}
- /* since the block has been initialized successfully, it's now
- * okay to cancel it */
+ /*
+ * since the block has been initialized successfully, it's now
+ * okay to cancel it
+ */
set_bit(US_FLIDX_SG_ACTIVE, &us->dflags);
/* did an abort occur during the submission? */
@@ -515,7 +527,8 @@ EXPORT_SYMBOL_GPL(usb_stor_bulk_transfer_sg);
* Transport routines
***********************************************************************/
-/* There are so many devices that report the capacity incorrectly,
+/*
+ * There are so many devices that report the capacity incorrectly,
* this routine was written to counteract some of the resulting
* problems.
*/
@@ -533,7 +546,8 @@ static void last_sector_hacks(struct us_data *us, struct scsi_cmnd *srb)
[12] = 0x14 /* Record Not Found */
};
- /* If last-sector problems can't occur, whether because the
+ /*
+ * If last-sector problems can't occur, whether because the
* capacity was already decremented or because the device is
* known to report the correct capacity, then we don't need
* to do anything.
@@ -559,13 +573,15 @@ static void last_sector_hacks(struct us_data *us, struct scsi_cmnd *srb)
if (srb->result == SAM_STAT_GOOD && scsi_get_resid(srb) == 0) {
- /* The command succeeded. We know this device doesn't
+ /*
+ * The command succeeded. We know this device doesn't
* have the last-sector bug, so stop checking it.
*/
us->use_last_sector_hacks = 0;
} else {
- /* The command failed. Allow up to 3 retries in case this
+ /*
+ * The command failed. Allow up to 3 retries in case this
* is some normal sort of failure. After that, assume the
* capacity is wrong and we're trying to access the sector
* beyond the end. Replace the result code and sense data
@@ -581,7 +597,8 @@ static void last_sector_hacks(struct us_data *us, struct scsi_cmnd *srb)
}
done:
- /* Don't reset the retry counter for TEST UNIT READY commands,
+ /*
+ * Don't reset the retry counter for TEST UNIT READY commands,
* because they get issued after device resets which might be
* caused by a failed last-sector access.
*/
@@ -589,7 +606,8 @@ static void last_sector_hacks(struct us_data *us, struct scsi_cmnd *srb)
us->last_sector_retries = 0;
}
-/* Invoke the transport and basic error-handling/recovery methods
+/*
+ * Invoke the transport and basic error-handling/recovery methods
*
* This is used by the protocol layers to actually send the message to
* the device and receive the response.
@@ -603,7 +621,8 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
scsi_set_resid(srb, 0);
result = us->transport(srb, us);
- /* if the command gets aborted by the higher layers, we need to
+ /*
+ * if the command gets aborted by the higher layers, we need to
* short-circuit all other processing
*/
if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
@@ -628,7 +647,8 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
srb->result = SAM_STAT_GOOD;
- /* Determine if we need to auto-sense
+ /*
+ * Determine if we need to auto-sense
*
* I normally don't use a flag like this, but it's almost impossible
* to understand what's going on here if I don't.
@@ -728,7 +748,8 @@ Retry_Sense:
goto Handle_Errors;
}
- /* Some devices claim to support larger sense but fail when
+ /*
+ * Some devices claim to support larger sense but fail when
* trying to request it. When a transport failure happens
* using US_FS_SANE_SENSE, we always retry with a standard
* (small) sense request. This fixes some USB GSM modems
@@ -746,7 +767,8 @@ Retry_Sense:
if (temp_result != USB_STOR_TRANSPORT_GOOD) {
usb_stor_dbg(us, "-- auto-sense failure\n");
- /* we skip the reset if this happens to be a
+ /*
+ * we skip the reset if this happens to be a
* multi-target device, since failure of an
* auto-sense is perfectly valid
*/
@@ -756,7 +778,8 @@ Retry_Sense:
return;
}
- /* If the sense data returned is larger than 18-bytes then we
+ /*
+ * If the sense data returned is larger than 18-bytes then we
* assume this device supports requesting more in the future.
* The response code must be 70h through 73h inclusive.
*/
@@ -767,7 +790,8 @@ Retry_Sense:
usb_stor_dbg(us, "-- SANE_SENSE support enabled\n");
us->fflags |= US_FL_SANE_SENSE;
- /* Indicate to the user that we truncated their sense
+ /*
+ * Indicate to the user that we truncated their sense
* because we didn't know it supported larger sense.
*/
usb_stor_dbg(us, "-- Sense data truncated to %i from %i\n",
@@ -795,13 +819,15 @@ Retry_Sense:
SCSI_SENSE_BUFFERSIZE, 4);
fm_ili = (scdd ? scdd[3] : srb->sense_buffer[2]) & 0xA0;
- /* We often get empty sense data. This could indicate that
+ /*
+ * We often get empty sense data. This could indicate that
* everything worked or that there was an unspecified
* problem. We have to decide which.
*/
if (sshdr.sense_key == 0 && sshdr.asc == 0 && sshdr.ascq == 0 &&
fm_ili == 0) {
- /* If things are really okay, then let's show that.
+ /*
+ * If things are really okay, then let's show that.
* Zero out the sense buffer so the higher layers
* won't realize we did an unsolicited auto-sense.
*/
@@ -809,7 +835,8 @@ Retry_Sense:
srb->result = SAM_STAT_GOOD;
srb->sense_buffer[0] = 0x0;
- /* If there was a problem, report an unspecified
+ /*
+ * If there was a problem, report an unspecified
* hardware error to prevent the higher layers from
* entering an infinite retry loop.
*/
@@ -860,20 +887,26 @@ Retry_Sense:
last_sector_hacks(us, srb);
return;
- /* Error and abort processing: try to resynchronize with the device
+ /*
+ * Error and abort processing: try to resynchronize with the device
* by issuing a port reset. If that fails, try a class-specific
- * device reset. */
+ * device reset.
+ */
Handle_Errors:
- /* Set the RESETTING bit, and clear the ABORTING bit so that
- * the reset may proceed. */
+ /*
+ * Set the RESETTING bit, and clear the ABORTING bit so that
+ * the reset may proceed.
+ */
scsi_lock(us_to_host(us));
set_bit(US_FLIDX_RESETTING, &us->dflags);
clear_bit(US_FLIDX_ABORTING, &us->dflags);
scsi_unlock(us_to_host(us));
- /* We must release the device lock because the pre_reset routine
- * will want to acquire it. */
+ /*
+ * We must release the device lock because the pre_reset routine
+ * will want to acquire it.
+ */
mutex_unlock(&us->dev_mutex);
result = usb_stor_port_reset(us);
mutex_lock(&us->dev_mutex);
@@ -891,10 +924,12 @@ Retry_Sense:
/* Stop the current URB transfer */
void usb_stor_stop_transport(struct us_data *us)
{
- /* If the state machine is blocked waiting for an URB,
+ /*
+ * If the state machine is blocked waiting for an URB,
* let's wake it up. The test_and_clear_bit() call
* guarantees that if a URB has just been submitted,
- * it won't be cancelled more than once. */
+ * it won't be cancelled more than once.
+ */
if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags)) {
usb_stor_dbg(us, "-- cancelling URB\n");
usb_unlink_urb(us->current_urb);
@@ -955,7 +990,8 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
/* STATUS STAGE */
- /* NOTE: CB does not have a status stage. Silly, I know. So
+ /*
+ * NOTE: CB does not have a status stage. Silly, I know. So
* we have to catch this at a higher level.
*/
if (us->protocol != USB_PR_CBI)
@@ -967,7 +1003,8 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- /* UFI gives us ASC and ASCQ, like a request sense
+ /*
+ * UFI gives us ASC and ASCQ, like a request sense
*
* REQUEST_SENSE and INQUIRY don't affect the sense data on UFI
* devices, so we ignore the information for those commands. Note
@@ -983,7 +1020,8 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
return USB_STOR_TRANSPORT_GOOD;
}
- /* If not UFI, we interpret the data as a result code
+ /*
+ * If not UFI, we interpret the data as a result code
* The first byte should always be a 0x0.
*
* Some bogus devices don't follow that rule. They stuff the ASC
@@ -1005,7 +1043,8 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
}
return USB_STOR_TRANSPORT_ERROR;
- /* the CBI spec requires that the bulk pipe must be cleared
+ /*
+ * the CBI spec requires that the bulk pipe must be cleared
* following any data-in/out command failure (section 2.4.3.1.3)
*/
Failed:
@@ -1107,9 +1146,11 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
/* DATA STAGE */
/* send/receive data payload, if there is any */
- /* Some USB-IDE converter chips need a 100us delay between the
+ /*
+ * Some USB-IDE converter chips need a 100us delay between the
* command phase and the data phase. Some devices need a little
- * more than that, probably because of clock rate inaccuracies. */
+ * more than that, probably because of clock rate inaccuracies.
+ */
if (unlikely(us->fflags & US_FL_GO_SLOW))
usleep_range(125, 150);
@@ -1121,7 +1162,8 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
if (result == USB_STOR_XFER_ERROR)
return USB_STOR_TRANSPORT_ERROR;
- /* If the device tried to send back more data than the
+ /*
+ * If the device tried to send back more data than the
* amount requested, the spec requires us to transfer
* the CSW anyway. Since there's no point retrying the
* the command, we'll return fake sense data indicating
@@ -1156,7 +1198,8 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
}
}
- /* See flow chart on pg 15 of the Bulk Only Transport spec for
+ /*
+ * See flow chart on pg 15 of the Bulk Only Transport spec for
* an explanation of how this code works.
*/
@@ -1165,7 +1208,8 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
bcs, US_BULK_CS_WRAP_LEN, &cswlen);
- /* Some broken devices add unnecessary zero-length packets to the
+ /*
+ * Some broken devices add unnecessary zero-length packets to the
* end of their data transfers. Such packets show up as 0-length
* CSWs. If we encounter such a thing, try to read the CSW again.
*/
@@ -1201,7 +1245,8 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
return USB_STOR_TRANSPORT_ERROR;
}
- /* Some broken devices report odd signatures, so we do not check them
+ /*
+ * Some broken devices report odd signatures, so we do not check them
* for validity against the spec. We store the first one we see,
* and check subsequent transfers for validity against this signature.
*/
@@ -1217,11 +1262,14 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
return USB_STOR_TRANSPORT_ERROR;
}
- /* try to compute the actual residue, based on how much data
- * was really transferred and what the device tells us */
+ /*
+ * try to compute the actual residue, based on how much data
+ * was really transferred and what the device tells us
+ */
if (residue && !(us->fflags & US_FL_IGNORE_RESIDUE)) {
- /* Heuristically detect devices that generate bogus residues
+ /*
+ * Heuristically detect devices that generate bogus residues
* by seeing what happens with INQUIRY and READ CAPACITY
* commands.
*/
@@ -1259,7 +1307,8 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
return USB_STOR_TRANSPORT_FAILED;
case US_BULK_STAT_PHASE:
- /* phase error -- note that a transport reset will be
+ /*
+ * phase error -- note that a transport reset will be
* invoked by the invoke_transport() function
*/
return USB_STOR_TRANSPORT_ERROR;
@@ -1274,7 +1323,8 @@ EXPORT_SYMBOL_GPL(usb_stor_Bulk_transport);
* Reset routines
***********************************************************************/
-/* This is the common part of the device reset code.
+/*
+ * This is the common part of the device reset code.
*
* It's handy that every transport mechanism uses the control endpoint for
* resets.
@@ -1302,8 +1352,10 @@ static int usb_stor_reset_common(struct us_data *us,
return result;
}
- /* Give the device some time to recover from the reset,
- * but don't delay disconnect processing. */
+ /*
+ * Give the device some time to recover from the reset,
+ * but don't delay disconnect processing.
+ */
wait_event_interruptible_timeout(us->delay_wait,
test_bit(US_FLIDX_DISCONNECTING, &us->dflags),
HZ*6);
@@ -1328,8 +1380,7 @@ static int usb_stor_reset_common(struct us_data *us,
return result;
}
-/* This issues a CB[I] Reset to the device in question
- */
+/* This issues a CB[I] Reset to the device in question */
#define CB_RESET_CMD_SIZE 12
int usb_stor_CB_reset(struct us_data *us)
@@ -1343,7 +1394,8 @@ int usb_stor_CB_reset(struct us_data *us)
}
EXPORT_SYMBOL_GPL(usb_stor_CB_reset);
-/* This issues a Bulk-only Reset to the device in question, including
+/*
+ * This issues a Bulk-only Reset to the device in question, including
* clearing the subsequent endpoint halts that may occur.
*/
int usb_stor_Bulk_reset(struct us_data *us)
@@ -1354,7 +1406,8 @@ int usb_stor_Bulk_reset(struct us_data *us)
}
EXPORT_SYMBOL_GPL(usb_stor_Bulk_reset);
-/* Issue a USB port reset to the device. The caller must not hold
+/*
+ * Issue a USB port reset to the device. The caller must not hold
* us->dev_mutex.
*/
int usb_stor_port_reset(struct us_data *us)
diff --git a/drivers/usb/storage/transport.h b/drivers/usb/storage/transport.h
index 9369d752d419..dae3ecd2e6cf 100644
--- a/drivers/usb/storage/transport.h
+++ b/drivers/usb/storage/transport.h
@@ -1,4 +1,5 @@
-/* Driver for USB Mass Storage compliant devices
+/*
+ * Driver for USB Mass Storage compliant devices
* Transport Functions Header File
*
* Current development and maintenance by:
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 16bc679dc2fc..4d49fce406e1 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -799,7 +799,8 @@ static int uas_slave_alloc(struct scsi_device *sdev)
sdev->hostdata = devinfo;
- /* USB has unusual DMA-alignment requirements: Although the
+ /*
+ * USB has unusual DMA-alignment requirements: Although the
* starting address of each scatter-gather element doesn't matter,
* the length of each element except the last must be divisible
* by the Bulk maxpacket value. There's currently no way to
diff --git a/drivers/usb/storage/unusual_alauda.h b/drivers/usb/storage/unusual_alauda.h
index fa3e9edaa2cf..763bc03032a1 100644
--- a/drivers/usb/storage/unusual_alauda.h
+++ b/drivers/usb/storage/unusual_alauda.h
@@ -1,4 +1,5 @@
-/* Unusual Devices File for the Alauda-based card readers
+/*
+ * Unusual Devices File for the Alauda-based card readers
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/drivers/usb/storage/unusual_cypress.h b/drivers/usb/storage/unusual_cypress.h
index 82e8ed0324e3..e9a2eb88869a 100644
--- a/drivers/usb/storage/unusual_cypress.h
+++ b/drivers/usb/storage/unusual_cypress.h
@@ -1,4 +1,5 @@
-/* Unusual Devices File for devices based on the Cypress USB/ATA bridge
+/*
+ * Unusual Devices File for devices based on the Cypress USB/ATA bridge
* with support for ATACB
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/usb/storage/unusual_datafab.h b/drivers/usb/storage/unusual_datafab.h
index 582a603c78be..5049b6bbe5d5 100644
--- a/drivers/usb/storage/unusual_datafab.h
+++ b/drivers/usb/storage/unusual_datafab.h
@@ -1,4 +1,5 @@
-/* Unusual Devices File for the Datafab USB Compact Flash reader
+/*
+ * Unusual Devices File for the Datafab USB Compact Flash reader
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -79,7 +80,8 @@ UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff,
USB_SC_SCSI, USB_PR_DATAFAB, NULL,
0),
-/* Reported by Felix Moeller <felix@derklecks.de>
+/*
+ * Reported by Felix Moeller <felix@derklecks.de>
* in Germany this is sold by Hama with the productnumber 46952
* as "DualSlot CompactFlash(TM) & MStick Drive USB"
*/
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 7ffe4209067b..aa3539238848 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1,4 +1,5 @@
-/* Driver for USB Mass Storage compliant devices
+/*
+ * Driver for USB Mass Storage compliant devices
* Unusual Devices File
*
* Current development and maintenance by:
@@ -25,13 +26,15 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-/* IMPORTANT NOTE: This file must be included in another file which does
+/*
+ * IMPORTANT NOTE: This file must be included in another file which does
* the following thing for it to work:
* The UNUSUAL_DEV, COMPLIANT_DEV, and USUAL_DEV macros must be defined
* before this file is included.
*/
-/* If you edit this file, please try to keep it sorted first by VendorID,
+/*
+ * If you edit this file, please try to keep it sorted first by VendorID,
* then by ProductID.
*
* If you want to add an entry for this file, be sure to include the
@@ -47,13 +50,15 @@
* <usb-storage@lists.one-eyed-alien.net>
*/
-/* Note: If you add an entry only in order to set the CAPACITY_OK flag,
+/*
+ * Note: If you add an entry only in order to set the CAPACITY_OK flag,
* use the COMPLIANT_DEV macro instead of UNUSUAL_DEV. This is
* because such entries mark devices which actually work correctly,
* as opposed to devices that do something strangely or wrongly.
*/
-/* In-kernel mode switching is deprecated. Do not add new devices to
+/*
+ * In-kernel mode switching is deprecated. Do not add new devices to
* this list for the sole purpose of switching them to a different
* mode. Existing userspace solutions are superior.
*
@@ -66,8 +71,7 @@
#define NO_SDDR09
#endif
-/* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr>
- */
+/* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr> */
UNUSUAL_DEV( 0x03eb, 0x2002, 0x0100, 0x0100,
"ATMEL",
"SND1 Storage",
@@ -93,7 +97,8 @@ UNUSUAL_DEV( 0x03f0, 0x070c, 0x0000, 0x0000,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_SANE_SENSE ),
-/* Reported by Grant Grundler <grundler@parisc-linux.org>
+/*
+ * Reported by Grant Grundler <grundler@parisc-linux.org>
* HP r707 camera in "Disk" mode with 2.00.23 or 2.00.24 firmware.
*/
UNUSUAL_DEV( 0x03f0, 0x4002, 0x0001, 0x0001,
@@ -107,7 +112,8 @@ UNUSUAL_DEV( 0x03f3, 0x0001, 0x0000, 0x9999,
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
-/* Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net>
+/*
+ * Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net>
* and Olaf Hering <olh@suse.de> (different bcd's, same vendor/product)
* for USB floppies that need the SINGLE_LUN enforcement.
*/
@@ -124,7 +130,8 @@ UNUSUAL_DEV( 0x040d, 0x6205, 0x0003, 0x0003,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
-/* Deduced by Jonathan Woithe <jwoithe@just42.net>
+/*
+ * Deduced by Jonathan Woithe <jwoithe@just42.net>
* Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message
* always fails and confuses drive.
*/
@@ -167,8 +174,10 @@ UNUSUAL_DEV( 0x0420, 0x0001, 0x0100, 0x0100,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
-/* Reported by Andrew Nayenko <relan@bk.ru>
- * Updated for new firmware by Phillip Potter <phillipinda@hotmail.com> */
+/*
+ * Reported by Andrew Nayenko <relan@bk.ru>
+ * Updated for new firmware by Phillip Potter <phillipinda@hotmail.com>
+ */
UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0610,
"Nokia",
"Nokia 6288",
@@ -196,16 +205,20 @@ UNUSUAL_DEV( 0x0421, 0x0434, 0x0100, 0x0100,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
-/* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and
- * Einar Th. Einarsson <einarthered@gmail.com> */
+/*
+ * Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and
+ * Einar Th. Einarsson <einarthered@gmail.com>
+ */
UNUSUAL_DEV( 0x0421, 0x0444, 0x0100, 0x0100,
"Nokia",
"N91",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
-/* Reported by Jiri Slaby <jirislaby@gmail.com> and
- * Rene C. Castberg <Rene@Castberg.org> */
+/*
+ * Reported by Jiri Slaby <jirislaby@gmail.com> and
+ * Rene C. Castberg <Rene@Castberg.org>
+ */
UNUSUAL_DEV( 0x0421, 0x0446, 0x0100, 0x0100,
"Nokia",
"N80",
@@ -269,8 +282,10 @@ UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100,
US_FL_SINGLE_LUN ),
#endif
-/* Patch submitted by Daniel Drake <dsd@gentoo.org>
- * Device reports nonsense bInterfaceProtocol 6 when connected over USB2 */
+/*
+ * Patch submitted by Daniel Drake <dsd@gentoo.org>
+ * Device reports nonsense bInterfaceProtocol 6 when connected over USB2
+ */
UNUSUAL_DEV( 0x0451, 0x5416, 0x0100, 0x0100,
"Neuros Audio",
"USB 2.0 HD 2.5",
@@ -288,17 +303,18 @@ UNUSUAL_DEV( 0x0457, 0x0150, 0x0100, 0x0100,
USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
/*
-* Bohdan Linda <bohdan.linda@gmail.com>
-* 1GB USB sticks MyFlash High Speed. I have restricted
-* the revision to my model only
-*/
+ * Bohdan Linda <bohdan.linda@gmail.com>
+ * 1GB USB sticks MyFlash High Speed. I have restricted
+ * the revision to my model only
+ */
UNUSUAL_DEV( 0x0457, 0x0151, 0x0100, 0x0100,
"USB 2.0",
"Flash Disk",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NOT_LOCKABLE ),
-/* Reported by Tamas Kerecsen <kerecsen@bigfoot.com>
+/*
+ * Reported by Tamas Kerecsen <kerecsen@bigfoot.com>
* Obviously the PROM has not been customized by the VAR;
* the Vendor and Product string descriptors are:
* Generic Mass Storage (PROTOTYPE--Remember to change idVendor)
@@ -347,24 +363,30 @@ UNUSUAL_DEV( 0x0482, 0x0107, 0x0100, 0x0100,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE),
-/* Reported by Paul Stewart <stewart@wetlogic.net>
- * This entry is needed because the device reports Sub=ff */
+/*
+ * Reported by Paul Stewart <stewart@wetlogic.net>
+ * This entry is needed because the device reports Sub=ff
+ */
UNUSUAL_DEV( 0x04a4, 0x0004, 0x0001, 0x0001,
"Hitachi",
"DVD-CAM DZ-MV100A Camcorder",
USB_SC_SCSI, USB_PR_CB, NULL, US_FL_SINGLE_LUN),
-/* BENQ DC5330
+/*
+ * BENQ DC5330
* Reported by Manuel Fombuena <mfombuena@ya.com> and
- * Frank Copeland <fjc@thingy.apana.org.au> */
+ * Frank Copeland <fjc@thingy.apana.org.au>
+ */
UNUSUAL_DEV( 0x04a5, 0x3010, 0x0100, 0x0100,
"Tekom Technologies, Inc",
"300_CAMERA",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
-/* Patch for Nikon coolpix 2000
- * Submitted by Fabien Cosse <fabien.cosse@wanadoo.fr>*/
+/*
+ * Patch for Nikon coolpix 2000
+ * Submitted by Fabien Cosse <fabien.cosse@wanadoo.fr>
+ */
UNUSUAL_DEV( 0x04b0, 0x0301, 0x0010, 0x0010,
"NIKON",
"NIKON DSC E2000",
@@ -378,21 +400,26 @@ UNUSUAL_DEV( 0x04b3, 0x4001, 0x0110, 0x0110,
USB_SC_DEVICE, USB_PR_CB, NULL,
US_FL_MAX_SECTORS_MIN),
-/* Reported by Simon Levitt <simon@whattf.com>
- * This entry needs Sub and Proto fields */
+/*
+ * Reported by Simon Levitt <simon@whattf.com>
+ * This entry needs Sub and Proto fields
+ */
UNUSUAL_DEV( 0x04b8, 0x0601, 0x0100, 0x0100,
"Epson",
"875DC Storage",
USB_SC_SCSI, USB_PR_CB, NULL, US_FL_FIX_INQUIRY),
-/* Reported by Khalid Aziz <khalid@gonehiking.org>
- * This entry is needed because the device reports Sub=ff */
+/*
+ * Reported by Khalid Aziz <khalid@gonehiking.org>
+ * This entry is needed because the device reports Sub=ff
+ */
UNUSUAL_DEV( 0x04b8, 0x0602, 0x0110, 0x0110,
"Epson",
"785EPX Storage",
USB_SC_SCSI, USB_PR_BULK, NULL, US_FL_SINGLE_LUN),
-/* Not sure who reported this originally but
+/*
+ * Not sure who reported this originally but
* Pavel Machek <pavel@ucw.cz> reported that the extra US_FL_SINGLE_LUN
* flag be added */
UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210,
@@ -400,7 +427,8 @@ UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210,
"FinePix 1400Zoom",
USB_SC_UFI, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN),
-/* Reported by Ondrej Zary <linux@rainbow-software.org>
+/*
+ * Reported by Ondrej Zary <linux@rainbow-software.org>
* The device reports one sector more and breaks when that sector is accessed
*/
UNUSUAL_DEV( 0x04ce, 0x0002, 0x026c, 0x026c,
@@ -409,7 +437,8 @@ UNUSUAL_DEV( 0x04ce, 0x0002, 0x026c, 0x026c,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
-/* Reported by Kriston Fincher <kriston@airmail.net>
+/*
+ * Reported by Kriston Fincher <kriston@airmail.net>
* Patch submitted by Sean Millichamp <sean@bruenor.org>
* This is to support the Panasonic PalmCam PV-SD4090
* This entry is needed because the device reports Sub=ff
@@ -419,8 +448,10 @@ UNUSUAL_DEV( 0x04da, 0x0901, 0x0100, 0x0200,
"LS-120 Camera",
USB_SC_UFI, USB_PR_DEVICE, NULL, 0),
-/* From Yukihiro Nakai, via zaitcev@yahoo.com.
- * This is needed for CB instead of CBI */
+/*
+ * From Yukihiro Nakai, via zaitcev@yahoo.com.
+ * This is needed for CB instead of CBI
+ */
UNUSUAL_DEV( 0x04da, 0x0d05, 0x0000, 0x0000,
"Sharp CE-CW05",
"CD-R/RW Drive",
@@ -440,7 +471,8 @@ UNUSUAL_DEV( 0x04da, 0x2373, 0x0000, 0x9999,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
-/* Most of the following entries were developed with the help of
+/*
+ * Most of the following entries were developed with the help of
* Shuttle/SCM directly.
*/
UNUSUAL_DEV( 0x04e6, 0x0001, 0x0200, 0x0200,
@@ -536,7 +568,8 @@ UNUSUAL_DEV( 0x04e8, 0x5136, 0x0000, 0x9999,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64),
-/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
+/*
+ * Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
* Device uses standards-violating 32-byte Bulk Command Block Wrappers and
* reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.
*/
@@ -553,7 +586,8 @@ UNUSUAL_DEV( 0x050d, 0x0115, 0x0133, 0x0133,
USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
-/* Iomega Clik! Drive
+/*
+ * Iomega Clik! Drive
* Reported by David Chatenay <dchatenay@hotmail.com>
* The reason this is needed is not fully known.
*/
@@ -570,7 +604,8 @@ COMPLIANT_DEV(0x0525, 0xa4a5, 0x0000, 0x9999,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_CAPACITY_OK ),
-/* Yakumo Mega Image 37
+/*
+ * Yakumo Mega Image 37
* Submitted by Stephan Fuhrmann <atomenergie@t-online.de> */
UNUSUAL_DEV( 0x052b, 0x1801, 0x0100, 0x0100,
"Tekom Technologies, Inc",
@@ -578,8 +613,10 @@ UNUSUAL_DEV( 0x052b, 0x1801, 0x0100, 0x0100,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
-/* Another Yakumo camera.
- * Reported by Michele Alzetta <michele.alzetta@aliceposta.it> */
+/*
+ * Another Yakumo camera.
+ * Reported by Michele Alzetta <michele.alzetta@aliceposta.it>
+ */
UNUSUAL_DEV( 0x052b, 0x1804, 0x0100, 0x0100,
"Tekom Technologies, Inc",
"300_CAMERA",
@@ -593,16 +630,20 @@ UNUSUAL_DEV( 0x052b, 0x1807, 0x0100, 0x0100,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
-/* Yakumo Mega Image 47
- * Reported by Bjoern Paetzel <kolrabi@kolrabi.de> */
+/*
+ * Yakumo Mega Image 47
+ * Reported by Bjoern Paetzel <kolrabi@kolrabi.de>
+ */
UNUSUAL_DEV( 0x052b, 0x1905, 0x0100, 0x0100,
"Tekom Technologies, Inc",
"400_CAMERA",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
-/* Reported by Paul Ortyl <ortylp@3miasto.net>
- * Note that it's similar to the device above, only different prodID */
+/*
+ * Reported by Paul Ortyl <ortylp@3miasto.net>
+ * Note that it's similar to the device above, only different prodID
+ */
UNUSUAL_DEV( 0x052b, 0x1911, 0x0100, 0x0100,
"Tekom Technologies, Inc",
"400_CAMERA",
@@ -615,8 +656,10 @@ UNUSUAL_DEV( 0x054c, 0x0010, 0x0106, 0x0450,
USB_SC_SCSI, USB_PR_DEVICE, NULL,
US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ),
-/* Submitted by Lars Jacob <jacob.lars@googlemail.com>
- * This entry is needed because the device reports Sub=ff */
+/*
+ * Submitted by Lars Jacob <jacob.lars@googlemail.com>
+ * This entry is needed because the device reports Sub=ff
+ */
UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0610,
"Sony",
"DSC-T1/T5/H5",
@@ -719,7 +762,8 @@ UNUSUAL_DEV( 0x057b, 0x0000, 0x0000, 0x0299,
USB_SC_DEVICE, USB_PR_CB, NULL,
US_FL_SINGLE_LUN),
-/* Reported by Johann Cardon <johann.cardon@free.fr>
+/*
+ * Reported by Johann Cardon <johann.cardon@free.fr>
* This entry is needed only because the device reports
* bInterfaceClass = 0xff (vendor-specific)
*/
@@ -741,7 +785,8 @@ UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210,
"Digital Camera EX-20 DSC",
USB_SC_8070, USB_PR_DEVICE, NULL, 0 ),
-/* Reported by Andre Welter <a.r.welter@gmx.de>
+/*
+ * Reported by Andre Welter <a.r.welter@gmx.de>
* This antique device predates the release of the Bulk-only Transport
* spec, and if it gets a Get-Max-LUN then it requires the host to do a
* Clear-Halt on the bulk endpoints. The SINGLE_LUN flag will prevent
@@ -773,7 +818,8 @@ UNUSUAL_DEV( 0x059f, 0x0651, 0x0000, 0x0000,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_WP_DETECT ),
-/* Submitted by Joel Bourquard <numlock@freesurf.ch>
+/*
+ * Submitted by Joel Bourquard <numlock@freesurf.ch>
* Some versions of this device need the SubClass and Protocol overrides
* while others don't.
*/
@@ -783,7 +829,8 @@ UNUSUAL_DEV( 0x05ab, 0x0060, 0x1104, 0x1110,
USB_SC_SCSI, USB_PR_BULK, NULL,
US_FL_NEED_OVERRIDE ),
-/* Submitted by Sven Anderson <sven-linux@anderson.de>
+/*
+ * Submitted by Sven Anderson <sven-linux@anderson.de>
* There are at least four ProductIDs used for iPods, so I added 0x1202 and
* 0x1204. They just need the US_FL_FIX_CAPACITY. As the bcdDevice appears
* to change with firmware updates, I changed the range to maximum for all
@@ -824,7 +871,8 @@ UNUSUAL_DEV( 0x05ac, 0x120a, 0x0000, 0x9999,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
-/* Reported by Dan Williams <dcbw@redhat.com>
+/*
+ * Reported by Dan Williams <dcbw@redhat.com>
* Option N.V. mobile broadband modems
* Ignore driver CD mode and force into modem mode by default.
*/
@@ -843,7 +891,8 @@ UNUSUAL_DEV( 0x05dc, 0xb002, 0x0000, 0x0113,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
-/* The following two entries are for a Genesys USB to IDE
+/*
+ * The following two entries are for a Genesys USB to IDE
* converter chip, but it changes its ProductId depending
* on whether or not a disk or an optical device is enclosed
* They were originally reported by Alexander Oltu
@@ -873,8 +922,10 @@ UNUSUAL_DEV( 0x05e3, 0x0723, 0x9451, 0x9451,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_SANE_SENSE ),
-/* Reported by Hanno Boeck <hanno@gmx.de>
- * Taken from the Lycoris Kernel */
+/*
+ * Reported by Hanno Boeck <hanno@gmx.de>
+ * Taken from the Lycoris Kernel
+ */
UNUSUAL_DEV( 0x0636, 0x0003, 0x0000, 0x9999,
"Vivitar",
"Vivicam 35Xx",
@@ -908,8 +959,10 @@ UNUSUAL_DEV( 0x067b, 0x2317, 0x0001, 0x001,
US_FL_NOT_LOCKABLE ),
/* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */
-/* Change to bcdDeviceMin (0x0100 to 0x0001) reported by
- * Thomas Bartosik <tbartdev@gmx-topmail.de> */
+/*
+ * Change to bcdDeviceMin (0x0100 to 0x0001) reported by
+ * Thomas Bartosik <tbartdev@gmx-topmail.de>
+ */
UNUSUAL_DEV( 0x067b, 0x2507, 0x0001, 0x0100,
"Prolific Technology Inc.",
"Mass Storage Device",
@@ -961,7 +1014,8 @@ UNUSUAL_DEV( 0x071b, 0x3203, 0x0000, 0x0000,
US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64 |
US_FL_NO_READ_CAPACITY_16),
-/* Reported by Jean-Baptiste Onofre <jb@nanthrax.net>
+/*
+ * Reported by Jean-Baptiste Onofre <jb@nanthrax.net>
* Support the following product :
* "Dane-Elec MediaTouch"
*/
@@ -971,7 +1025,8 @@ UNUSUAL_DEV( 0x071b, 0x32bb, 0x0000, 0x0000,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
-/* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com>
+/*
+ * Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com>
* This USB MP3/AVI player device fails and disconnects if more than 128
* sectors (64kB) are read/written in a single command, and may be present
* at least in the following products:
@@ -1040,7 +1095,8 @@ UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100,
US_FL_SINGLE_LUN ),
#endif
-/* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100
+/*
+ * Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100
* Only revision 1.13 tested (same for all of the above devices,
* based on the Datafab DF-UG-07 chip). Needed for US_FL_FIX_INQUIRY.
* Submitted by Marek Michalkiewicz <marekm@amelek.gda.pl>.
@@ -1052,7 +1108,8 @@ UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ),
-/* Reported by Rauch Wolke <rauchwolke@gmx.net>
+/*
+ * Reported by Rauch Wolke <rauchwolke@gmx.net>
* and augmented by binbin <binbinsh@gmail.com> (Bugzilla #12882)
*/
UNUSUAL_DEV( 0x07c4, 0xa4a5, 0x0000, 0xffff,
@@ -1061,7 +1118,8 @@ UNUSUAL_DEV( 0x07c4, 0xa4a5, 0x0000, 0xffff,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_MAX_SECTORS_64 ),
-/* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
+/*
+ * Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
* to the USB storage specification in two ways:
* - They tell us they are using transport protocol CBI. In reality they
* are using transport protocol CB.
@@ -1119,7 +1177,8 @@ UNUSUAL_DEV( 0x084b, 0xa001, 0x0000, 0x9999,
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
-/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
+/*
+ * Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
* Flag will support Bulk devices which use a standards-violating 32-byte
* Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with
* Grandtech GT892x chip, which request "Proprietary SCSI Bulk" support.
@@ -1131,7 +1190,8 @@ UNUSUAL_DEV( 0x084d, 0x0011, 0x0110, 0x0110,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_BULK32),
-/* Reported by <ttkspam@free.fr>
+/*
+ * Reported by <ttkspam@free.fr>
* The device reports a vendor-specific device class, requiring an
* explicit vendor/product match.
*/
@@ -1140,11 +1200,12 @@ UNUSUAL_DEV( 0x0851, 0x1542, 0x0002, 0x0002,
"FW_Omega2",
USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0),
-/* Andrew Lunn <andrew@lunn.ch>
+/*
+ * Andrew Lunn <andrew@lunn.ch>
* PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL
* on LUN 4.
* Note: Vend:Prod clash with "Ltd Maxell WS30 Slim Digital Camera"
-*/
+ */
UNUSUAL_DEV( 0x0851, 0x1543, 0x0200, 0x0200,
"PanDigital",
"Photo Frame",
@@ -1170,7 +1231,8 @@ UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_SINGLE_LUN),
-/* Submitted by Dylan Taft <d13f00l@gmail.com>
+/*
+ * Submitted by Dylan Taft <d13f00l@gmail.com>
* US_FL_IGNORE_RESIDUE Needed
*/
UNUSUAL_DEV( 0x08ca, 0x3103, 0x0100, 0x0100,
@@ -1179,7 +1241,8 @@ UNUSUAL_DEV( 0x08ca, 0x3103, 0x0100, 0x0100,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE),
-/* Entry needed for flags. Moreover, all devices with this ID use
+/*
+ * Entry needed for flags. Moreover, all devices with this ID use
* bulk-only transport, but _some_ falsely report Control/Bulk instead.
* One example is "Trumpion Digital Research MYMP3".
* Submitted by Bjoern Brill <brill(at)fs.math.uni-frankfurt.de>
@@ -1190,7 +1253,8 @@ UNUSUAL_DEV( 0x090a, 0x1001, 0x0100, 0x0100,
USB_SC_DEVICE, USB_PR_BULK, NULL,
US_FL_NEED_OVERRIDE ),
-/* Reported by Filippo Bardelli <filibard@libero.it>
+/*
+ * Reported by Filippo Bardelli <filibard@libero.it>
* The device reports a subclass of RBC, which is wrong.
*/
UNUSUAL_DEV( 0x090a, 0x1050, 0x0100, 0x0100,
@@ -1213,7 +1277,8 @@ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
-/* Reported by Paul Hartman <paul.hartman+linux@gmail.com>
+/*
+ * Reported by Paul Hartman <paul.hartman+linux@gmail.com>
* This card reader returns "Illegal Request, Logical Block Address
* Out of Range" for the first READ(10) after a new card is inserted.
*/
@@ -1223,7 +1288,8 @@ UNUSUAL_DEV( 0x090c, 0x6000, 0x0100, 0x0100,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_INITIAL_READ10 ),
-/* This Pentax still camera is not conformant
+/*
+ * This Pentax still camera is not conformant
* to the USB storage specification: -
* - It does not like the INQUIRY command. So we must handle this command
* of the SCSI layer ourselves.
@@ -1236,8 +1302,10 @@ UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
-/* These are virtual windows driver CDs, which the zd1211rw driver
- * automatically converts into WLAN devices. */
+/*
+ * These are virtual windows driver CDs, which the zd1211rw driver
+ * automatically converts into WLAN devices.
+ */
UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101,
"ZyXEL",
"G-220F USB-WLAN Install",
@@ -1250,7 +1318,8 @@ UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_DEVICE ),
-/* Reported by Dan Williams <dcbw@redhat.com>
+/*
+ * Reported by Dan Williams <dcbw@redhat.com>
* Option N.V. mobile broadband modems
* Ignore driver CD mode and force into modem mode by default.
*/
@@ -1262,20 +1331,24 @@ UNUSUAL_DEV( 0x0af0, 0x6971, 0x0000, 0x9999,
USB_SC_DEVICE, USB_PR_DEVICE, option_ms_init,
0),
-/* Reported by F. Aben <f.aben@option.com>
+/*
+ * Reported by F. Aben <f.aben@option.com>
* This device (wrongly) has a vendor-specific device descriptor.
* The entry is needed so usb-storage can bind to it's mass-storage
- * interface as an interface driver */
+ * interface as an interface driver
+ */
UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000,
"Option",
"GI 0401 SD-Card",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
0 ),
-/* Reported by Jan Dumon <j.dumon@option.com>
+/*
+ * Reported by Jan Dumon <j.dumon@option.com>
* These devices (wrongly) have a vendor-specific device descriptor.
* These entries are needed so usb-storage can bind to their mass-storage
- * interface as an interface driver */
+ * interface as an interface driver
+ */
UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000,
"Option",
"GI 0431 SD-Card",
@@ -1419,7 +1492,8 @@ UNUSUAL_DEV( 0x0dc4, 0x0073, 0x0000, 0x0000,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
-/* Reported by Lubomir Blaha <tritol@trilogic.cz>
+/*
+ * Reported by Lubomir Blaha <tritol@trilogic.cz>
* I _REALLY_ don't know what 3rd, 4th number and all defines mean, but this
* works for me. Can anybody correct these values? (I able to test corrected
* version.)
@@ -1430,8 +1504,10 @@ UNUSUAL_DEV( 0x0dd8, 0x1060, 0x0000, 0xffff,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
-/* Reported by Edward Chapman (taken from linux-usb mailing list)
- Netac OnlyDisk Mini U2CV2 512MB USB 2.0 Flash Drive */
+/*
+ * Reported by Edward Chapman (taken from linux-usb mailing list)
+ * Netac OnlyDisk Mini U2CV2 512MB USB 2.0 Flash Drive
+ */
UNUSUAL_DEV( 0x0dd8, 0xd202, 0x0000, 0x9999,
"Netac",
"USB Flash Disk",
@@ -1439,8 +1515,10 @@ UNUSUAL_DEV( 0x0dd8, 0xd202, 0x0000, 0x9999,
US_FL_IGNORE_RESIDUE ),
-/* Patch by Stephan Walter <stephan.walter@epfl.ch>
- * I don't know why, but it works... */
+/*
+ * Patch by Stephan Walter <stephan.walter@epfl.ch>
+ * I don't know why, but it works...
+ */
UNUSUAL_DEV( 0x0dda, 0x0001, 0x0012, 0x0012,
"WINWARD",
"Music Disk",
@@ -1468,8 +1546,10 @@ UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
-/* Submitted by Daniel Drake <dsd@gentoo.org>
- * Reported by dayul on the Gentoo Forums */
+/*
+ * Submitted by Daniel Drake <dsd@gentoo.org>
+ * Reported by dayul on the Gentoo Forums
+ */
UNUSUAL_DEV( 0x0ea0, 0x2168, 0x0110, 0x0110,
"Ours Technology",
"Flash Disk",
@@ -1483,15 +1563,18 @@ UNUSUAL_DEV( 0x0ea0, 0x6828, 0x0110, 0x0110,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
-/* Reported by Benjamin Schiller <sbenni@gmx.de>
- * It is also sold by Easylite as DJ 20 */
+/*
+ * Reported by Benjamin Schiller <sbenni@gmx.de>
+ * It is also sold by Easylite as DJ 20
+ */
UNUSUAL_DEV( 0x0ed1, 0x7636, 0x0103, 0x0103,
"Typhoon",
"My DJ 1820",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64),
-/* Patch by Leonid Petrov mail at lpetrov.net
+/*
+ * Patch by Leonid Petrov mail at lpetrov.net
* Reported by Robert Spitzenpfeil <robert@spitzenpfeil.org>
* http://www.qbik.ch/usb/devices/showdev.php?id=1705
* Updated to 103 device by MJ Ray mjr at phonecoop.coop
@@ -1502,7 +1585,8 @@ UNUSUAL_DEV( 0x0f19, 0x0103, 0x0100, 0x0100,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
-/* David Kuehling <dvdkhlng@gmx.de>:
+/*
+ * David Kuehling <dvdkhlng@gmx.de>:
* for MP3-Player AVOX WSX-300ER (bought in Japan). Reports lots of SCSI
* errors when trying to write.
*/
@@ -1540,8 +1624,10 @@ UNUSUAL_DEV( 0x0fce, 0xd0e1, 0x0000, 0x0000,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_DEVICE),
-/* Reported by Jan Mate <mate@fiit.stuba.sk>
- * and by Soeren Sonnenburg <kernel@nn7.de> */
+/*
+ * Reported by Jan Mate <mate@fiit.stuba.sk>
+ * and by Soeren Sonnenburg <kernel@nn7.de>
+ */
UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000,
"Sony Ericsson",
"P990i",
@@ -1562,7 +1648,8 @@ UNUSUAL_DEV( 0x0fce, 0xe092, 0x0000, 0x0000,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
-/* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
+/*
+ * Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
* Tested on hardware version 1.10.
* Entry is needed only for the initializer function override.
* Devices with bcd > 110 seem to not need it while those
@@ -1586,7 +1673,8 @@ UNUSUAL_DEV(0x1058, 0x070a, 0x0000, 0x9999,
"My Passport HDD",
USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_WRITE_CACHE),
-/* Reported by Fabio Venturi <f.venturi@tdnet.it>
+/*
+ * Reported by Fabio Venturi <f.venturi@tdnet.it>
* The device reports a vendor-specific bDeviceClass.
*/
UNUSUAL_DEV( 0x10d6, 0x2200, 0x0100, 0x0100,
@@ -1595,7 +1683,8 @@ UNUSUAL_DEV( 0x10d6, 0x2200, 0x0100, 0x0100,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
0),
-/* Reported by Pascal Terjan <pterjan@mandriva.com>
+/*
+ * Reported by Pascal Terjan <pterjan@mandriva.com>
* Ignore driver CD mode and force into modem mode by default.
*/
UNUSUAL_DEV( 0x1186, 0x3e04, 0x0000, 0x0000,
@@ -1603,7 +1692,8 @@ UNUSUAL_DEV( 0x1186, 0x3e04, 0x0000, 0x0000,
"USB Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, option_ms_init, US_FL_IGNORE_DEVICE),
-/* Reported by Kevin Lloyd <linux@sierrawireless.com>
+/*
+ * Reported by Kevin Lloyd <linux@sierrawireless.com>
* Entry is needed for the initializer function override,
* which instructs the device to load as a modem
* device.
@@ -1614,7 +1704,8 @@ UNUSUAL_DEV( 0x1199, 0x0fff, 0x0000, 0x9999,
USB_SC_DEVICE, USB_PR_DEVICE, sierra_ms_init,
0),
-/* Reported by Jaco Kroon <jaco@kroon.co.za>
+/*
+ * Reported by Jaco Kroon <jaco@kroon.co.za>
* The usb-storage module found on the Digitech GNX4 (and supposedly other
* devices) misbehaves and causes a bunch of invalid I/O errors.
*/
@@ -1624,7 +1715,8 @@ UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x0100,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
-/* Reported by fangxiaozhi <huananhu@huawei.com>
+/*
+ * Reported by fangxiaozhi <huananhu@huawei.com>
* This brings the HUAWEI data card devices into multi-port mode
*/
UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000,
@@ -1993,7 +2085,8 @@ UNUSUAL_DEV( 0x152d, 0x0567, 0x0114, 0x0116,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_BROKEN_FUA ),
-/* Reported by Alexandre Oliva <oliva@lsd.ic.unicamp.br>
+/*
+ * Reported by Alexandre Oliva <oliva@lsd.ic.unicamp.br>
* JMicron responds to USN and several other SCSI ioctls with a
* residue that causes subsequent I/O requests to fail. */
UNUSUAL_DEV( 0x152d, 0x2329, 0x0100, 0x0100,
@@ -2009,7 +2102,8 @@ UNUSUAL_DEV( 0x152d, 0x2566, 0x0114, 0x0114,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_BROKEN_FUA ),
-/* Entrega Technologies U1-SC25 (later Xircom PortGear PGSCSI)
+/*
+ * Entrega Technologies U1-SC25 (later Xircom PortGear PGSCSI)
* and Mac USB Dock USB-SCSI */
UNUSUAL_DEV( 0x1645, 0x0007, 0x0100, 0x0133,
"Entrega Technologies",
@@ -2017,8 +2111,10 @@ UNUSUAL_DEV( 0x1645, 0x0007, 0x0100, 0x0133,
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
-/* Reported by Robert Schedel <r.schedel@yahoo.de>
- * Note: this is a 'super top' device like the above 14cd/6600 device */
+/*
+ * Reported by Robert Schedel <r.schedel@yahoo.de>
+ * Note: this is a 'super top' device like the above 14cd/6600 device
+ */
UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201,
"Teac",
"HD-35PUK-B",
@@ -2045,10 +2141,12 @@ UNUSUAL_DEV( 0x1822, 0x0001, 0x0000, 0x9999,
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
-/* Reported by Hans de Goede <hdegoede@redhat.com>
+/*
+ * Reported by Hans de Goede <hdegoede@redhat.com>
* These Appotech controllers are found in Picture Frames, they provide a
* (buggy) emulation of a cdrom drive which contains the windows software
- * Uploading of pictures happens over the corresponding /dev/sg device. */
+ * Uploading of pictures happens over the corresponding /dev/sg device.
+ */
UNUSUAL_DEV( 0x1908, 0x1315, 0x0000, 0x0000,
"BUILDWIN",
"Photo Frame",
@@ -2065,19 +2163,22 @@ UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0200,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_READ_DISC_INFO ),
-/* Reported by Oliver Neukum <oneukum@suse.com>
+/*
+ * Reported by Oliver Neukum <oneukum@suse.com>
* This device morphes spontaneously into another device if the access
* pattern of Windows isn't followed. Thus writable media would be dirty
* if the initial instance is used. So the device is limited to its
* virtual CD.
- * And yes, the concept that BCD goes up to 9 is not heeded */
+ * And yes, the concept that BCD goes up to 9 is not heeded
+ */
UNUSUAL_DEV( 0x19d2, 0x1225, 0x0000, 0xffff,
"ZTE,Incorporated",
"ZTE WCDMA Technologies MSM",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
-/* Reported by Sven Geggus <sven-usbst@geggus.net>
+/*
+ * Reported by Sven Geggus <sven-usbst@geggus.net>
* This encrypted pen drive returns bogus data for the initial READ(10).
*/
UNUSUAL_DEV( 0x1b1c, 0x1ab5, 0x0200, 0x0200,
@@ -2086,7 +2187,8 @@ UNUSUAL_DEV( 0x1b1c, 0x1ab5, 0x0200, 0x0200,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_INITIAL_READ10 ),
-/* Reported by Hans de Goede <hdegoede@redhat.com>
+/*
+ * Reported by Hans de Goede <hdegoede@redhat.com>
* These are mini projectors using USB for both power and video data transport
* The usb-storage interface is a virtual windows driver CD, which the gm12u320
* driver automatically converts into framebuffer & kms dri device nodes.
@@ -2097,9 +2199,11 @@ UNUSUAL_DEV( 0x1de1, 0xc102, 0x0000, 0xffff,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_DEVICE ),
-/* Patch by Richard Schütz <r.schtz@t-online.de>
+/*
+ * Patch by Richard Schütz <r.schtz@t-online.de>
* This external hard drive enclosure uses a JMicron chip which
- * needs the US_FL_IGNORE_RESIDUE flag to work properly. */
+ * needs the US_FL_IGNORE_RESIDUE flag to work properly.
+ */
UNUSUAL_DEV( 0x1e68, 0x001b, 0x0000, 0x0000,
"TrekStor GmbH & Co. KG",
"DataStation maxi g.u",
@@ -2126,7 +2230,8 @@ UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
-/* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
+/*
+ * patch submitted by Davide Perini <perini.davide@dpsoftware.org>
* and Renato Perini <rperini@email.it>
*/
UNUSUAL_DEV( 0x22b8, 0x3010, 0x0001, 0x0001,
@@ -2153,7 +2258,8 @@ UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_GO_SLOW ),
-/* Reported by Frederic Marchal <frederic.marchal@wowcompany.com>
+/*
+ * Reported by Frederic Marchal <frederic.marchal@wowcompany.com>
* Mio Moov 330
*/
UNUSUAL_DEV( 0x3340, 0xffff, 0x0000, 0x0000,
diff --git a/drivers/usb/storage/unusual_freecom.h b/drivers/usb/storage/unusual_freecom.h
index 59a261155b98..1f5aab42ece2 100644
--- a/drivers/usb/storage/unusual_freecom.h
+++ b/drivers/usb/storage/unusual_freecom.h
@@ -1,4 +1,5 @@
-/* Unusual Devices File for the Freecom USB/IDE adaptor
+/*
+ * Unusual Devices File for the Freecom USB/IDE adaptor
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/drivers/usb/storage/unusual_isd200.h b/drivers/usb/storage/unusual_isd200.h
index 14cca0c48302..9b6862ec3d4f 100644
--- a/drivers/usb/storage/unusual_isd200.h
+++ b/drivers/usb/storage/unusual_isd200.h
@@ -1,4 +1,5 @@
-/* Unusual Devices File for In-System Design, Inc. ISD200 ASIC
+/*
+ * Unusual Devices File for In-System Design, Inc. ISD200 ASIC
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/drivers/usb/storage/unusual_jumpshot.h b/drivers/usb/storage/unusual_jumpshot.h
index 54be78b5d643..413e64fa6b95 100644
--- a/drivers/usb/storage/unusual_jumpshot.h
+++ b/drivers/usb/storage/unusual_jumpshot.h
@@ -1,4 +1,5 @@
-/* Unusual Devices File for the Lexar "Jumpshot" Compact Flash reader
+/*
+ * Unusual Devices File for the Lexar "Jumpshot" Compact Flash reader
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/drivers/usb/storage/unusual_karma.h b/drivers/usb/storage/unusual_karma.h
index 6df03972a22c..e6fad3aeae20 100644
--- a/drivers/usb/storage/unusual_karma.h
+++ b/drivers/usb/storage/unusual_karma.h
@@ -1,4 +1,5 @@
-/* Unusual Devices File for the Rio Karma
+/*
+ * Unusual Devices File for the Rio Karma
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/drivers/usb/storage/unusual_onetouch.h b/drivers/usb/storage/unusual_onetouch.h
index 0abb819c7405..425dc22f345a 100644
--- a/drivers/usb/storage/unusual_onetouch.h
+++ b/drivers/usb/storage/unusual_onetouch.h
@@ -1,4 +1,5 @@
-/* Unusual Devices File for the Maxtor OneTouch USB hard drive's button
+/*
+ * Unusual Devices File for the Maxtor OneTouch USB hard drive's button
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -18,7 +19,8 @@
#if defined(CONFIG_USB_STORAGE_ONETOUCH) || \
defined(CONFIG_USB_STORAGE_ONETOUCH_MODULE)
-/* Submitted by: Nick Sillik <n.sillik@temple.edu>
+/*
+ * Submitted by: Nick Sillik <n.sillik@temple.edu>
* Needed for OneTouch extension to usb-storage
*/
UNUSUAL_DEV( 0x0d49, 0x7000, 0x0000, 0x9999,
diff --git a/drivers/usb/storage/unusual_realtek.h b/drivers/usb/storage/unusual_realtek.h
index e41f50c95ed4..8fe624ad302a 100644
--- a/drivers/usb/storage/unusual_realtek.h
+++ b/drivers/usb/storage/unusual_realtek.h
@@ -1,4 +1,5 @@
-/* Driver for Realtek RTS51xx USB card reader
+/*
+ * Driver for Realtek RTS51xx USB card reader
*
* Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
*
diff --git a/drivers/usb/storage/unusual_sddr09.h b/drivers/usb/storage/unusual_sddr09.h
index 59a7e37b6c11..d9d38ac4abf9 100644
--- a/drivers/usb/storage/unusual_sddr09.h
+++ b/drivers/usb/storage/unusual_sddr09.h
@@ -1,4 +1,5 @@
-/* Unusual Devices File for SanDisk SDDR-09 SmartMedia reader
+/*
+ * Unusual Devices File for SanDisk SDDR-09 SmartMedia reader
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/drivers/usb/storage/unusual_sddr55.h b/drivers/usb/storage/unusual_sddr55.h
index fcb7e12c598f..ebb1d1c6c467 100644
--- a/drivers/usb/storage/unusual_sddr55.h
+++ b/drivers/usb/storage/unusual_sddr55.h
@@ -1,4 +1,5 @@
-/* Unusual Devices File for SanDisk SDDR-55 SmartMedia reader
+/*
+ * Unusual Devices File for SanDisk SDDR-55 SmartMedia reader
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index 53341a77d89f..cbea9f329e71 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -1,4 +1,5 @@
-/* Driver for USB Attached SCSI devices - Unusual Devices File
+/*
+ * Driver for USB Attached SCSI devices - Unusual Devices File
*
* (c) 2013 Hans de Goede <hdegoede@redhat.com>
*
diff --git a/drivers/usb/storage/unusual_usbat.h b/drivers/usb/storage/unusual_usbat.h
index 38e79c4e6d6a..2044ad5ef5e4 100644
--- a/drivers/usb/storage/unusual_usbat.h
+++ b/drivers/usb/storage/unusual_usbat.h
@@ -1,4 +1,5 @@
-/* Unusual Devices File for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable
+/*
+ * Unusual Devices File for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 9de988a0f856..ef2d8cde6ef7 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -1,4 +1,5 @@
-/* Driver for USB Mass Storage compliant devices
+/*
+ * Driver for USB Mass Storage compliant devices
*
* Current development and maintenance by:
* (c) 1999-2003 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
@@ -97,7 +98,8 @@ MODULE_PARM_DESC(quirks, "supplemental list of device IDs and their quirks");
* with the entries in usb_storage_usb_ids[], defined in usual-tables.c.
*/
-/* The vendor name should be kept at eight characters or less, and
+/*
+ *The vendor name should be kept at eight characters or less, and
* the product name should be kept at 16 characters or less. If a device
* has the US_FL_FIX_INQUIRY flag, then the vendor and product names
* normally generated by a device through the INQUIRY response will be
@@ -191,8 +193,10 @@ int usb_stor_suspend(struct usb_interface *iface, pm_message_t message)
if (us->suspend_resume_hook)
(us->suspend_resume_hook)(us, US_SUSPEND);
- /* When runtime PM is working, we'll set a flag to indicate
- * whether we should autoresume when a SCSI request arrives. */
+ /*
+ * When runtime PM is working, we'll set a flag to indicate
+ * whether we should autoresume when a SCSI request arrives.
+ */
mutex_unlock(&us->dev_mutex);
return 0;
@@ -220,8 +224,10 @@ int usb_stor_reset_resume(struct usb_interface *iface)
/* Report the reset to the SCSI core */
usb_stor_report_bus_reset(us);
- /* FIXME: Notify the subdrivers that they need to reinitialize
- * the device */
+ /*
+ * FIXME: Notify the subdrivers that they need to reinitialize
+ * the device
+ */
return 0;
}
EXPORT_SYMBOL_GPL(usb_stor_reset_resume);
@@ -250,8 +256,10 @@ int usb_stor_post_reset(struct usb_interface *iface)
/* Report the reset to the SCSI core */
usb_stor_report_bus_reset(us);
- /* FIXME: Notify the subdrivers that they need to reinitialize
- * the device */
+ /*
+ * FIXME: Notify the subdrivers that they need to reinitialize
+ * the device
+ */
mutex_unlock(&us->dev_mutex);
return 0;
@@ -274,15 +282,17 @@ void fill_inquiry_response(struct us_data *us, unsigned char *data,
return;
memset(data+8, ' ', 28);
- if (data[0]&0x20) { /* USB device currently not connected. Return
- peripheral qualifier 001b ("...however, the
- physical device is not currently connected
- to this logical unit") and leave vendor and
- product identification empty. ("If the target
- does store some of the INQUIRY data on the
- device, it may return zeros or ASCII spaces
- (20h) in those fields until the data is
- available from the device."). */
+ if (data[0]&0x20) { /*
+ * USB device currently not connected. Return
+ * peripheral qualifier 001b ("...however, the
+ * physical device is not currently connected
+ * to this logical unit") and leave vendor and
+ * product identification empty. ("If the target
+ * does store some of the INQUIRY data on the
+ * device, it may return zeros or ASCII spaces
+ * (20h) in those fields until the data is
+ * available from the device.").
+ */
} else {
u16 bcdDevice = le16_to_cpu(us->pusb_dev->descriptor.bcdDevice);
int n;
@@ -336,7 +346,8 @@ static int usb_stor_control_thread(void * __us)
scsi_unlock(host);
- /* reject the command if the direction indicator
+ /*
+ * reject the command if the direction indicator
* is UNKNOWN
*/
if (us->srb->sc_data_direction == DMA_BIDIRECTIONAL) {
@@ -344,7 +355,8 @@ static int usb_stor_control_thread(void * __us)
us->srb->result = DID_ERROR << 16;
}
- /* reject if target != 0 or if LUN is higher than
+ /*
+ * reject if target != 0 or if LUN is higher than
* the maximum known LUN
*/
else if (us->srb->device->id &&
@@ -362,8 +374,10 @@ static int usb_stor_control_thread(void * __us)
us->srb->result = DID_BAD_TARGET << 16;
}
- /* Handle those devices which need us to fake
- * their inquiry data */
+ /*
+ * Handle those devices which need us to fake
+ * their inquiry data
+ */
else if ((us->srb->cmnd[0] == INQUIRY) &&
(us->fflags & US_FL_FIX_INQUIRY)) {
unsigned char data_ptr[36] = {
@@ -395,11 +409,13 @@ SkipForAbort:
usb_stor_dbg(us, "scsi command aborted\n");
}
- /* If an abort request was received we need to signal that
+ /*
+ * If an abort request was received we need to signal that
* the abort has finished. The proper test for this is
* the TIMED_OUT flag, not srb->result == DID_ABORT, because
* the timeout might have occurred after the command had
- * already completed with a different result code. */
+ * already completed with a different result code.
+ */
if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
complete(&(us->notify));
@@ -610,7 +626,8 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id,
le16_to_cpu(dev->descriptor.idProduct),
us->fflags);
- /* Log a message if a non-generic unusual_dev entry contains an
+ /*
+ * Log a message if a non-generic unusual_dev entry contains an
* unnecessary subclass or protocol override. This may stimulate
* reports from users that will help us remove unneeded entries
* from the unusual_devs.h table.
@@ -782,8 +799,10 @@ static int usb_stor_acquire_resources(struct us_data *us)
return -ENOMEM;
}
- /* Just before we start our control thread, initialize
- * the device if it needs initialization */
+ /*
+ * Just before we start our control thread, initialize
+ * the device if it needs initialization
+ */
if (us->unusual_dev->initFunction) {
p = us->unusual_dev->initFunction(us);
if (p)
@@ -805,7 +824,8 @@ static int usb_stor_acquire_resources(struct us_data *us)
/* Release all our dynamic resources */
static void usb_stor_release_resources(struct us_data *us)
{
- /* Tell the control thread to exit. The SCSI host must
+ /*
+ * Tell the control thread to exit. The SCSI host must
* already have been removed and the DISCONNECTING flag set
* so that we won't accept any more commands.
*/
@@ -836,7 +856,8 @@ static void dissociate_dev(struct us_data *us)
usb_set_intfdata(us->pusb_intf, NULL);
}
-/* First stage of disconnect processing: stop SCSI scanning,
+/*
+ * First stage of disconnect processing: stop SCSI scanning,
* remove the host, and stop accepting new commands
*/
static void quiesce_and_remove_host(struct us_data *us)
@@ -849,7 +870,8 @@ static void quiesce_and_remove_host(struct us_data *us)
wake_up(&us->delay_wait);
}
- /* Prevent SCSI scanning (if it hasn't started yet)
+ /*
+ * Prevent SCSI scanning (if it hasn't started yet)
* or wait for the SCSI-scanning routine to stop.
*/
cancel_delayed_work_sync(&us->scan_dwork);
@@ -858,12 +880,14 @@ static void quiesce_and_remove_host(struct us_data *us)
if (test_bit(US_FLIDX_SCAN_PENDING, &us->dflags))
usb_autopm_put_interface_no_suspend(us->pusb_intf);
- /* Removing the host will perform an orderly shutdown: caches
+ /*
+ * Removing the host will perform an orderly shutdown: caches
* synchronized, disks spun down, etc.
*/
scsi_remove_host(host);
- /* Prevent any new commands from being accepted and cut short
+ /*
+ * Prevent any new commands from being accepted and cut short
* reset delays.
*/
scsi_lock(host);
@@ -878,8 +902,10 @@ static void release_everything(struct us_data *us)
usb_stor_release_resources(us);
dissociate_dev(us);
- /* Drop our reference to the host; the SCSI core will free it
- * (and "us" along with it) when the refcount becomes 0. */
+ /*
+ * Drop our reference to the host; the SCSI core will free it
+ * (and "us" along with it) when the refcount becomes 0.
+ */
scsi_host_put(us_to_host(us));
}
@@ -900,7 +926,8 @@ static void usb_stor_scan_dwork(struct work_struct *work)
us->max_lun = usb_stor_Bulk_max_lun(us);
/*
* Allow proper scanning of devices that present more than 8 LUNs
- * While not affecting other devices that may need the previous behavior
+ * While not affecting other devices that may need the previous
+ * behavior
*/
if (us->max_lun >= 8)
us_to_host(us)->max_lun = us->max_lun+1;
@@ -975,7 +1002,8 @@ int usb_stor_probe1(struct us_data **pus,
get_transport(us);
get_protocol(us);
- /* Give the caller a chance to fill in specialized transport
+ /*
+ * Give the caller a chance to fill in specialized transport
* or protocol settings.
*/
return 0;
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index da0ad3241728..8fae28b40bb4 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -1,4 +1,5 @@
-/* Driver for USB Mass Storage compliant devices
+/*
+ * Driver for USB Mass Storage compliant devices
* Main Header File
*
* Current development and maintenance by:
@@ -100,7 +101,8 @@ typedef void (*pm_hook)(struct us_data *, int); /* power management hook */
/* we allocate one of these for every device that we remember */
struct us_data {
- /* The device we're working with
+ /*
+ * The device we're working with
* It's important to note:
* (o) you must hold dev_mutex to change pusb_dev
*/
@@ -125,7 +127,7 @@ struct us_data {
u8 max_lun;
u8 ifnum; /* interface number */
- u8 ep_bInterval; /* interrupt interval */
+ u8 ep_bInterval; /* interrupt interval */
/* function pointers for this device */
trans_cmnd transport; /* transport function */
@@ -175,8 +177,10 @@ static inline struct us_data *host_to_us(struct Scsi_Host *host) {
extern void fill_inquiry_response(struct us_data *us,
unsigned char *data, unsigned int data_len);
-/* The scsi_lock() and scsi_unlock() macros protect the sm_state and the
- * single queue element srb for write access */
+/*
+ * The scsi_lock() and scsi_unlock() macros protect the sm_state and the
+ * single queue element srb for write access
+ */
#define scsi_unlock(host) spin_unlock_irq(host->host_lock)
#define scsi_lock(host) spin_lock_irq(host->host_lock)
diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c
index 5ef8ce74aae4..499669bcf700 100644
--- a/drivers/usb/storage/usual-tables.c
+++ b/drivers/usb/storage/usual-tables.c
@@ -1,4 +1,5 @@
-/* Driver for USB Mass Storage devices
+/*
+ * Driver for USB Mass Storage devices
* Usual Tables File for usb-storage and libusual
*
* Copyright (C) 2009 Alan Stern (stern@rowland.harvard.edu)