USB: serial: ports: add minor and port number

The usb_serial_port structure had the number field, which was the minor
number for the port, which almost no one really cared about.  They
really wanted the number of the port within the device, which you had to
subtract from the minor of the parent usb_serial_device structure.  To
clean this up, provide the real minor number of the port, and the number
of the port within the serial device separately, as these numbers might
not be related in the future.

Bonus is that this cleans up a lot of logic in the drivers, and saves
lines overall.

Tested-by: Tobias Winter <tobias@linuxdingsda.de>
Reviewed-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

--
 drivers/staging/serqt_usb2/serqt_usb2.c |   21 +++--------
 drivers/usb/serial/ark3116.c            |    2 -
 drivers/usb/serial/bus.c                |    6 +--
 drivers/usb/serial/console.c            |    2 -
 drivers/usb/serial/cp210x.c             |    2 -
 drivers/usb/serial/cypress_m8.c         |    4 +-
 drivers/usb/serial/digi_acceleport.c    |    6 ---
 drivers/usb/serial/f81232.c             |    5 +-
 drivers/usb/serial/garmin_gps.c         |    6 +--
 drivers/usb/serial/io_edgeport.c        |   58 ++++++++++++--------------------
 drivers/usb/serial/io_ti.c              |   21 ++++-------
 drivers/usb/serial/keyspan.c            |   29 +++++++---------
 drivers/usb/serial/metro-usb.c          |    4 +-
 drivers/usb/serial/mos7720.c            |   37 +++++++++-----------
 drivers/usb/serial/mos7840.c            |   52 +++++++++-------------------
 drivers/usb/serial/opticon.c            |    2 -
 drivers/usb/serial/pl2303.c             |    2 -
 drivers/usb/serial/quatech2.c           |    7 +--
 drivers/usb/serial/sierra.c             |    2 -
 drivers/usb/serial/ti_usb_3410_5052.c   |   10 ++---
 drivers/usb/serial/usb-serial.c         |    7 ++-
 drivers/usb/serial/usb_wwan.c           |    2 -
 drivers/usb/serial/whiteheat.c          |   20 +++++------
 include/linux/usb/serial.h              |    6 ++-
 24 files changed, 133 insertions(+), 180 deletions(-)

1 files changed, 9 insertions, 12 deletions

diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 1be6ba7bee27..d32bf2b7f988 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -259,7 +259,7 @@ static int send_cmd(struct usb_device *dev, __u8 command,
 /* clear tx/rx buffers and fifo in TI UMP */
 static int purge_port(struct usb_serial_port *port, __u16 mask)
 {
-	int port_number = port->number - port->serial->minor;
+	int port_number = port->port_number;
 
 	dev_dbg(&port->dev, "%s - port %d, mask %x\n", __func__, port_number, mask);
 
@@ -1392,7 +1392,8 @@ stayinbootmode:
 
 static int ti_do_config(struct edgeport_port *port, int feature, int on)
 {
-	int port_number = port->port->number - port->port->serial->minor;
+	int port_number = port->port->port_number;
+
 	on = !!on;	/* 1 or 0 not bitmask */
 	return send_cmd(port->port->serial->dev,
 			feature, (__u8)(UMPM_UART1_PORT + port_number),
@@ -1637,7 +1638,7 @@ static void edge_bulk_in_callback(struct urb *urb)
 		return;
 	}
 
-	port_number = edge_port->port->number - edge_port->port->serial->minor;
+	port_number = edge_port->port->port_number;
 
 	if (edge_port->lsr_event) {
 		edge_port->lsr_event = 0;
@@ -1730,7 +1731,7 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
 	if (edge_port == NULL)
 		return -ENODEV;
 
-	port_number = port->number - port->serial->minor;
+	port_number = port->port_number;
 	switch (port_number) {
 	case 0:
 		edge_port->uart_base = UMPMEM_BASE_UART1;
@@ -1908,7 +1909,7 @@ static void edge_close(struct usb_serial_port *port)
 	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
 
 	dev_dbg(&port->dev, "%s - send umpc_close_port\n", __func__);
-	port_number = port->number - port->serial->minor;
+	port_number = port->port_number;
 	send_cmd(serial->dev, UMPC_CLOSE_PORT,
 		     (__u8)(UMPM_UART1_PORT + port_number), 0, NULL, 0);
 
@@ -2137,10 +2138,7 @@ static void change_port_settings(struct tty_struct *tty,
 	int baud;
 	unsigned cflag;
 	int status;
-	int port_number = edge_port->port->number -
-					edge_port->port->serial->minor;
-
-	dev_dbg(dev, "%s - port %d\n", __func__, edge_port->port->number);
+	int port_number = edge_port->port->port_number;
 
 	config = kmalloc (sizeof (*config), GFP_KERNEL);
 	if (!config) {
@@ -2284,7 +2282,6 @@ static void edge_set_termios(struct tty_struct *tty,
 		tty->termios.c_cflag, tty->termios.c_iflag);
 	dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__,
 		old_termios->c_cflag, old_termios->c_iflag);
-	dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number);
 
 	if (edge_port == NULL)
 		return;
@@ -2367,7 +2364,7 @@ static int get_serial_info(struct edgeport_port *edge_port,
 
 	tmp.type		= PORT_16550A;
 	tmp.line		= edge_port->port->serial->minor;
-	tmp.port		= edge_port->port->number;
+	tmp.port		= edge_port->port->port_number;
 	tmp.irq			= 0;
 	tmp.flags		= ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
 	tmp.xmit_fifo_size	= edge_port->port->bulk_out_size;
@@ -2386,7 +2383,7 @@ static int edge_ioctl(struct tty_struct *tty,
 	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 
-	dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd);
+	dev_dbg(&port->dev, "%s - cmd = 0x%x\n", __func__, cmd);
 
 	switch (cmd) {
 	case TIOCGSERIAL: