summaryrefslogtreecommitdiffstats
path: root/drivers/usb/misc/Kconfig
diff options
context:
space:
mode:
authorManu Gautam <mgautam@codeaurora.org>2013-07-02 20:13:51 -0700
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2013-07-25 11:49:30 -0700
commit1353aa53851e3bc7f2c6365753d9c2783c34f882 (patch)
tree55fabf3384518681635ccad23702ebe51485bf02 /drivers/usb/misc/Kconfig
parent42189d854f174e7b29e0fdb4da9984ba63126a92 (diff)
downloadlinux-1353aa53851e3bc7f2c6365753d9c2783c34f882.tar.bz2
usb: misc: EHSET Test Fixture device driver for host compliance
An Embedded Host High-Speed Electrical Test (EHSET) test fixture is used to initiate test modes on a host controller in order to perform the high speed electrical testing procedure for USB-IF compliance. When this test fixture is connected to a host, it can enumerate as one of several selectable VID/PID pairs, each corresponding to one of the following test modes: * TEST_SE0_NAK * TEST_J * TEST_K * TEST_PACKET * HS_HOST_PORT_SUSPEND_RESUME * SINGLE_STEP_GET_DEV_DESC * SINGLE_STEP_SET_FEATURE The USB EHSET procedure can be found here: http://www.usb.org/developers/onthego/EHSET_v1.01.pdf Signed-off-by: Manu Gautam <mgautam@codeaurora.org> [jackp@codeaurora.org: imported from commit 073c9409 on codeaurora.org; minor cleanup and updated author email] Signed-off-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/misc/Kconfig')
-rw-r--r--drivers/usb/misc/Kconfig13
1 files changed, 13 insertions, 0 deletions
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index a51e7d6afda9..ca91420f5c21 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -200,6 +200,19 @@ config USB_TEST
See <http://www.linux-usb.org/usbtest/> for more information,
including sample test device firmware and "how to use it".
+config USB_EHSET_TEST_FIXTURE
+ tristate "USB EHSET Test Fixture driver"
+ help
+ Say Y here if you want to support the special test fixture device
+ used for the USB-IF Embedded Host High-Speed Electrical Test procedure.
+
+ When the test fixture is connected, it can enumerate as one of several
+ VID/PID pairs. This driver then initiates a corresponding test mode on
+ the downstream port to which the test fixture is attached.
+
+ See <http://www.usb.org/developers/onthego/EHSET_v1.01.pdf> for more
+ information.
+
config USB_ISIGHTFW
tristate "iSight firmware loading support"
select FW_LOADER