Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 2192 insertions, 0 deletions

diff --git a/drivers/usb/media/usbvideo.c b/drivers/usb/media/usbvideo.c
new file mode 100644
index 000000000000..298484aa27d2
--- /dev/null
+++ b/drivers/usb/media/usbvideo.c
@@ -0,0 +1,2192 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/smp_lock.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+
+#include <asm/io.h>
+
+#include "usbvideo.h"
+
+#if defined(MAP_NR)
+#define	virt_to_page(v)	MAP_NR(v)	/* Kernels 2.2.x */
+#endif
+
+static int video_nr = -1;
+module_param(video_nr, int, 0);
+
+/*
+ * Local prototypes.
+ */
+static void usbvideo_Disconnect(struct usb_interface *intf);
+static void usbvideo_CameraRelease(struct uvd *uvd);
+
+static int usbvideo_v4l_ioctl(struct inode *inode, struct file *file,
+			      unsigned int cmd, unsigned long arg);
+static int usbvideo_v4l_mmap(struct file *file, struct vm_area_struct *vma);
+static int usbvideo_v4l_open(struct inode *inode, struct file *file);
+static ssize_t usbvideo_v4l_read(struct file *file, char __user *buf,
+			     size_t count, loff_t *ppos);
+static int usbvideo_v4l_close(struct inode *inode, struct file *file);
+
+static int usbvideo_StartDataPump(struct uvd *uvd);
+static void usbvideo_StopDataPump(struct uvd *uvd);
+static int usbvideo_GetFrame(struct uvd *uvd, int frameNum);
+static int usbvideo_NewFrame(struct uvd *uvd, int framenum);
+static void usbvideo_SoftwareContrastAdjustment(struct uvd *uvd,
+						struct usbvideo_frame *frame);
+
+/*******************************/
+/* Memory management functions */
+/*******************************/
+static void *usbvideo_rvmalloc(unsigned long size)
+{
+	void *mem;
+	unsigned long adr;
+
+	size = PAGE_ALIGN(size);
+	mem = vmalloc_32(size);
+	if (!mem)
+		return NULL;
+
+	memset(mem, 0, size); /* Clear the ram out, no junk to the user */
+	adr = (unsigned long) mem;
+	while (size > 0) {
+		SetPageReserved(vmalloc_to_page((void *)adr));
+		adr += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+
+	return mem;
+}
+
+static void usbvideo_rvfree(void *mem, unsigned long size)
+{
+	unsigned long adr;
+
+	if (!mem)
+		return;
+
+	adr = (unsigned long) mem;
+	while ((long) size > 0) {
+		ClearPageReserved(vmalloc_to_page((void *)adr));
+		adr += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+	vfree(mem);
+}
+
+static void RingQueue_Initialize(struct RingQueue *rq)
+{
+	assert(rq != NULL);
+	init_waitqueue_head(&rq->wqh);
+}
+
+static void RingQueue_Allocate(struct RingQueue *rq, int rqLen)
+{
+	/* Make sure the requested size is a power of 2 and
+	   round up if necessary. This allows index wrapping
+	   using masks rather than modulo */
+
+	int i = 1;
+	assert(rq != NULL);
+	assert(rqLen > 0);
+
+	while(rqLen >> i)
+		i++;
+	if(rqLen != 1 << (i-1))
+		rqLen = 1 << i;
+
+	rq->length = rqLen;
+	rq->ri = rq->wi = 0;
+	rq->queue = usbvideo_rvmalloc(rq->length);
+	assert(rq->queue != NULL);
+}
+
+static int RingQueue_IsAllocated(const struct RingQueue *rq)
+{
+	if (rq == NULL)
+		return 0;
+	return (rq->queue != NULL) && (rq->length > 0);
+}
+
+static void RingQueue_Free(struct RingQueue *rq)
+{
+	assert(rq != NULL);
+	if (RingQueue_IsAllocated(rq)) {
+		usbvideo_rvfree(rq->queue, rq->length);
+		rq->queue = NULL;
+		rq->length = 0;
+	}
+}
+
+int RingQueue_Dequeue(struct RingQueue *rq, unsigned char *dst, int len)
+{
+	int rql, toread;
+
+	assert(rq != NULL);
+	assert(dst != NULL);
+
+	rql = RingQueue_GetLength(rq);
+	if(!rql)
+		return 0;
+
+	/* Clip requested length to available data */
+	if(len > rql)
+		len = rql;
+
+	toread = len;
+	if(rq->ri > rq->wi) {
+		/* Read data from tail */
+		int read = (toread < (rq->length - rq->ri)) ? toread : rq->length - rq->ri;
+		memcpy(dst, rq->queue + rq->ri, read);
+		toread -= read;
+		dst += read;
+		rq->ri = (rq->ri + read) & (rq->length-1);
+	}
+	if(toread) {
+		/* Read data from head */
+		memcpy(dst, rq->queue + rq->ri, toread);
+		rq->ri = (rq->ri + toread) & (rq->length-1);
+	}
+	return len;
+}
+
+EXPORT_SYMBOL(RingQueue_Dequeue);
+
+int RingQueue_Enqueue(struct RingQueue *rq, const unsigned char *cdata, int n)
+{
+	int enqueued = 0;
+
+	assert(rq != NULL);
+	assert(cdata != NULL);
+	assert(rq->length > 0);
+	while (n > 0) {
+		int m, q_avail;
+
+		/* Calculate the largest chunk that fits the tail of the ring */
+		q_avail = rq->length - rq->wi;
+		if (q_avail <= 0) {
+			rq->wi = 0;
+			q_avail = rq->length;
+		}
+		m = n;
+		assert(q_avail > 0);
+		if (m > q_avail)
+			m = q_avail;
+
+		memcpy(rq->queue + rq->wi, cdata, m);
+		RING_QUEUE_ADVANCE_INDEX(rq, wi, m);
+		cdata += m;
+		enqueued += m;
+		n -= m;
+	}
+	return enqueued;
+}
+
+EXPORT_SYMBOL(RingQueue_Enqueue);
+
+static void RingQueue_InterruptibleSleepOn(struct RingQueue *rq)
+{
+	assert(rq != NULL);
+	interruptible_sleep_on(&rq->wqh);
+}
+
+void RingQueue_WakeUpInterruptible(struct RingQueue *rq)
+{
+	assert(rq != NULL);
+	if (waitqueue_active(&rq->wqh))
+		wake_up_interruptible(&rq->wqh);
+}
+
+EXPORT_SYMBOL(RingQueue_WakeUpInterruptible);
+
+void RingQueue_Flush(struct RingQueue *rq)
+{
+	assert(rq != NULL);
+	rq->ri = 0;
+	rq->wi = 0;
+}
+
+EXPORT_SYMBOL(RingQueue_Flush);
+
+
+/*
+ * usbvideo_VideosizeToString()
+ *
+ * This procedure converts given videosize value to readable string.
+ *
+ * History:
+ * 07-Aug-2000 Created.
+ * 19-Oct-2000 Reworked for usbvideo module.
+ */
+static void usbvideo_VideosizeToString(char *buf, int bufLen, videosize_t vs)
+{
+	char tmp[40];
+	int n;
+
+	n = 1 + sprintf(tmp, "%ldx%ld", VIDEOSIZE_X(vs), VIDEOSIZE_Y(vs));
+	assert(n < sizeof(tmp));
+	if ((buf == NULL) || (bufLen < n))
+		err("usbvideo_VideosizeToString: buffer is too small.");
+	else
+		memmove(buf, tmp, n);
+}
+
+/*
+ * usbvideo_OverlayChar()
+ *
+ * History:
+ * 01-Feb-2000 Created.
+ */
+static void usbvideo_OverlayChar(struct uvd *uvd, struct usbvideo_frame *frame,
+				 int x, int y, int ch)
+{
+	static const unsigned short digits[16] = {
+		0xF6DE, /* 0 */
+		0x2492, /* 1 */
+		0xE7CE, /* 2 */
+		0xE79E, /* 3 */
+		0xB792, /* 4 */
+		0xF39E, /* 5 */
+		0xF3DE, /* 6 */
+		0xF492, /* 7 */
+		0xF7DE, /* 8 */
+		0xF79E, /* 9 */
+		0x77DA, /* a */
+		0xD75C, /* b */
+		0xF24E, /* c */
+		0xD6DC, /* d */
+		0xF34E, /* e */
+		0xF348  /* f */
+	};
+	unsigned short digit;
+	int ix, iy;
+
+	if ((uvd == NULL) || (frame == NULL))
+		return;
+
+	if (ch >= '0' && ch <= '9')
+		ch -= '0';
+	else if (ch >= 'A' && ch <= 'F')
+		ch = 10 + (ch - 'A');
+	else if (ch >= 'a' && ch <= 'f')
+		ch = 10 + (ch - 'a');
+	else
+		return;
+	digit = digits[ch];
+
+	for (iy=0; iy < 5; iy++) {
+		for (ix=0; ix < 3; ix++) {
+			if (digit & 0x8000) {
+				if (uvd->paletteBits & (1L << VIDEO_PALETTE_RGB24)) {
+/* TODO */				RGB24_PUTPIXEL(frame, x+ix, y+iy, 0xFF, 0xFF, 0xFF);
+				}
+			}
+			digit = digit << 1;
+		}
+	}
+}
+
+/*
+ * usbvideo_OverlayString()
+ *
+ * History:
+ * 01-Feb-2000 Created.
+ */
+static void usbvideo_OverlayString(struct uvd *uvd, struct usbvideo_frame *frame,
+				   int x, int y, const char *str)
+{
+	while (*str) {
+		usbvideo_OverlayChar(uvd, frame, x, y, *str);
+		str++;
+		x += 4; /* 3 pixels character + 1 space */
+	}
+}
+
+/*
+ * usbvideo_OverlayStats()
+ *
+ * Overlays important debugging information.
+ *
+ * History:
+ * 01-Feb-2000 Created.
+ */
+static void usbvideo_OverlayStats(struct uvd *uvd, struct usbvideo_frame *frame)
+{
+	const int y_diff = 8;
+	char tmp[16];
+	int x = 10, y=10;
+	long i, j, barLength;
+	const int qi_x1 = 60, qi_y1 = 10;
+	const int qi_x2 = VIDEOSIZE_X(frame->request) - 10, qi_h = 10;
+
+	/* Call the user callback, see if we may proceed after that */
+	if (VALID_CALLBACK(uvd, overlayHook)) {
+		if (GET_CALLBACK(uvd, overlayHook)(uvd, frame) < 0)
+			return;
+	}
+
+	/*
+	 * We draw a (mostly) hollow rectangle with qi_xxx coordinates.
+	 * Left edge symbolizes the queue index 0; right edge symbolizes
+	 * the full capacity of the queue.
+	 */
+	barLength = qi_x2 - qi_x1 - 2;
+	if ((barLength > 10) && (uvd->paletteBits & (1L << VIDEO_PALETTE_RGB24))) {
+/* TODO */	long u_lo, u_hi, q_used;
+		long m_ri, m_wi, m_lo, m_hi;
+
+		/*
+		 * Determine fill zones (used areas of the queue):
+		 * 0 xxxxxxx u_lo ...... uvd->dp.ri xxxxxxxx u_hi ..... uvd->dp.length
+		 *
+		 * if u_lo < 0 then there is no first filler.
+		 */
+
+		q_used = RingQueue_GetLength(&uvd->dp);
+		if ((uvd->dp.ri + q_used) >= uvd->dp.length) {
+			u_hi = uvd->dp.length;
+			u_lo = (q_used + uvd->dp.ri) & (uvd->dp.length-1);
+		} else {
+			u_hi = (q_used + uvd->dp.ri);
+			u_lo = -1;
+		}
+
+		/* Convert byte indices into screen units */
+		m_ri = qi_x1 + ((barLength * uvd->dp.ri) / uvd->dp.length);
+		m_wi = qi_x1 + ((barLength * uvd->dp.wi) / uvd->dp.length);
+		m_lo = (u_lo > 0) ? (qi_x1 + ((barLength * u_lo) / uvd->dp.length)) : -1;
+		m_hi = qi_x1 + ((barLength * u_hi) / uvd->dp.length);
+
+		for (j=qi_y1; j < (qi_y1 + qi_h); j++) {
+			for (i=qi_x1; i < qi_x2; i++) {
+				/* Draw border lines */
+				if ((j == qi_y1) || (j == (qi_y1 + qi_h - 1)) ||
+				    (i == qi_x1) || (i == (qi_x2 - 1))) {
+					RGB24_PUTPIXEL(frame, i, j, 0xFF, 0xFF, 0xFF);
+					continue;
+				}
+				/* For all other points the Y coordinate does not matter */
+				if ((i >= m_ri) && (i <= (m_ri + 3))) {
+					RGB24_PUTPIXEL(frame, i, j, 0x00, 0xFF, 0x00);
+				} else if ((i >= m_wi) && (i <= (m_wi + 3))) {
+					RGB24_PUTPIXEL(frame, i, j, 0xFF, 0x00, 0x00);
+				} else if ((i < m_lo) || ((i > m_ri) && (i < m_hi)))
+					RGB24_PUTPIXEL(frame, i, j, 0x00, 0x00, 0xFF);
+			}
+		}
+	}
+
+	sprintf(tmp, "%8lx", uvd->stats.frame_num);
+	usbvideo_OverlayString(uvd, frame, x, y, tmp);
+	y += y_diff;
+
+	sprintf(tmp, "%8lx", uvd->stats.urb_count);
+	usbvideo_OverlayString(uvd, frame, x, y, tmp);
+	y += y_diff;
+
+	sprintf(tmp, "%8lx", uvd->stats.urb_length);
+	usbvideo_OverlayString(uvd, frame, x, y, tmp);
+	y += y_diff;
+
+	sprintf(tmp, "%8lx", uvd->stats.data_count);
+	usbvideo_OverlayString(uvd, frame, x, y, tmp);
+	y += y_diff;
+
+	sprintf(tmp, "%8lx", uvd->stats.header_count);
+	usbvideo_OverlayString(uvd, frame, x, y, tmp);
+	y += y_diff;
+
+	sprintf(tmp, "%8lx", uvd->stats.iso_skip_count);
+	usbvideo_OverlayString(uvd, frame, x, y, tmp);
+	y += y_diff;
+
+	sprintf(tmp, "%8lx", uvd->stats.iso_err_count);
+	usbvideo_OverlayString(uvd, frame, x, y, tmp);
+	y += y_diff;
+
+	sprintf(tmp, "%8x", uvd->vpic.colour);
+	usbvideo_OverlayString(uvd, frame, x, y, tmp);
+	y += y_diff;
+
+	sprintf(tmp, "%8x", uvd->vpic.hue);
+	usbvideo_OverlayString(uvd, frame, x, y, tmp);
+	y += y_diff;
+
+	sprintf(tmp, "%8x", uvd->vpic.brightness >> 8);
+	usbvideo_OverlayString(uvd, frame, x, y, tmp);
+	y += y_diff;
+
+	sprintf(tmp, "%8x", uvd->vpic.contrast >> 12);
+	usbvideo_OverlayString(uvd, frame, x, y, tmp);
+	y += y_diff;
+
+	sprintf(tmp, "%8d", uvd->vpic.whiteness >> 8);
+	usbvideo_OverlayString(uvd, frame, x, y, tmp);
+	y += y_diff;
+}
+
+/*
+ * usbvideo_ReportStatistics()
+ *
+ * This procedure prints packet and transfer statistics.
+ *
+ * History:
+ * 14-Jan-2000 Corrected default multiplier.
+ */
+static void usbvideo_ReportStatistics(const struct uvd *uvd)
+{
+	if ((uvd != NULL) && (uvd->stats.urb_count > 0)) {
+		unsigned long allPackets, badPackets, goodPackets, percent;
+		allPackets = uvd->stats.urb_count * CAMERA_URB_FRAMES;
+		badPackets = uvd->stats.iso_skip_count + uvd->stats.iso_err_count;
+		goodPackets = allPackets - badPackets;
+		/* Calculate percentage wisely, remember integer limits */
+		assert(allPackets != 0);
+		if (goodPackets < (((unsigned long)-1)/100))
+			percent = (100 * goodPackets) / allPackets;
+		else
+			percent = goodPackets / (allPackets / 100);
+		info("Packet Statistics: Total=%lu. Empty=%lu. Usage=%lu%%",
+		     allPackets, badPackets, percent);
+		if (uvd->iso_packet_len > 0) {
+			unsigned long allBytes, xferBytes;
+			char multiplier = ' ';
+			allBytes = allPackets * uvd->iso_packet_len;
+			xferBytes = uvd->stats.data_count;
+			assert(allBytes != 0);
+			if (xferBytes < (((unsigned long)-1)/100))
+				percent = (100 * xferBytes) / allBytes;
+			else
+				percent = xferBytes / (allBytes / 100);
+			/* Scale xferBytes for easy reading */
+			if (xferBytes > 10*1024) {
+				xferBytes /= 1024;
+				multiplier = 'K';
+				if (xferBytes > 10*1024) {
+					xferBytes /= 1024;
+					multiplier = 'M';
+					if (xferBytes > 10*1024) {
+						xferBytes /= 1024;
+						multiplier = 'G';
+						if (xferBytes > 10*1024) {
+							xferBytes /= 1024;
+							multiplier = 'T';
+						}
+					}
+				}
+			}
+			info("Transfer Statistics: Transferred=%lu%cB Usage=%lu%%",
+			     xferBytes, multiplier, percent);
+		}
+	}
+}
+
+/*
+ * usbvideo_TestPattern()
+ *
+ * Procedure forms a test pattern (yellow grid on blue background).
+ *
+ * Parameters:
+ * fullframe: if TRUE then entire frame is filled, otherwise the procedure
+ *	      continues from the current scanline.
+ * pmode      0: fill the frame with solid blue color (like on VCR or TV)
+ *	      1: Draw a colored grid
+ *
+ * History:
+ * 01-Feb-2000 Created.
+ */
+void usbvideo_TestPattern(struct uvd *uvd, int fullframe, int pmode)
+{
+	struct usbvideo_frame *frame;
+	int num_cell = 0;
+	int scan_length = 0;
+	static int num_pass = 0;
+
+	if (uvd == NULL) {
+		err("%s: uvd == NULL", __FUNCTION__);
+		return;
+	}
+	if ((uvd->curframe < 0) || (uvd->curframe >= USBVIDEO_NUMFRAMES)) {
+		err("%s: uvd->curframe=%d.", __FUNCTION__, uvd->curframe);
+		return;
+	}
+
+	/* Grab the current frame */
+	frame = &uvd->frame[uvd->curframe];
+
+	/* Optionally start at the beginning */
+	if (fullframe) {
+		frame->curline = 0;
+		frame->seqRead_Length = 0;
+	}
+#if 0
+	{	/* For debugging purposes only */
+		char tmp[20];
+		usbvideo_VideosizeToString(tmp, sizeof(tmp), frame->request);
+		info("testpattern: frame=%s", tmp);
+	}
+#endif
+	/* Form every scan line */
+	for (; frame->curline < VIDEOSIZE_Y(frame->request); frame->curline++) {
+		int i;
+		unsigned char *f = frame->data +
+			(VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL * frame->curline);
+		for (i=0; i < VIDEOSIZE_X(frame->request); i++) {
+			unsigned char cb=0x80;
+			unsigned char cg = 0;
+			unsigned char cr = 0;
+
+			if (pmode == 1) {
+				if (frame->curline % 32 == 0)
+					cb = 0, cg = cr = 0xFF;
+				else if (i % 32 == 0) {
+					if (frame->curline % 32 == 1)
+						num_cell++;
+					cb = 0, cg = cr = 0xFF;
+				} else {
+					cb = ((num_cell*7) + num_pass) & 0xFF;
+					cg = ((num_cell*5) + num_pass*2) & 0xFF;
+					cr = ((num_cell*3) + num_pass*3) & 0xFF;
+				}
+			} else {
+				/* Just the blue screen */
+			}
+				
+			*f++ = cb;
+			*f++ = cg;
+			*f++ = cr;
+			scan_length += 3;
+		}
+	}
+
+	frame->frameState = FrameState_Done;
+	frame->seqRead_Length += scan_length;
+	++num_pass;
+
+	/* We do this unconditionally, regardless of FLAGS_OVERLAY_STATS */
+	usbvideo_OverlayStats(uvd, frame);
+}
+
+EXPORT_SYMBOL(usbvideo_TestPattern);
+
+
+#ifdef DEBUG
+/*
+ * usbvideo_HexDump()
+ *
+ * A debugging tool. Prints hex dumps.
+ *
+ * History:
+ * 29-Jul-2000 Added printing of offsets.
+ */
+void usbvideo_HexDump(const unsigned char *data, int len)
+{
+	const int bytes_per_line = 32;
+	char tmp[128]; /* 32*3 + 5 */
+	int i, k;
+
+	for (i=k=0; len > 0; i++, len--) {
+		if (i > 0 && ((i % bytes_per_line) == 0)) {
+			printk("%s\n", tmp);
+			k=0;
+		}
+		if ((i % bytes_per_line) == 0)
+			k += sprintf(&tmp[k], "%04x: ", i);
+		k += sprintf(&tmp[k], "%02x ", data[i]);
+	}
+	if (k > 0)
+		printk("%s\n", tmp);
+}
+
+EXPORT_SYMBOL(usbvideo_HexDump);
+
+#endif
+
+/* ******************************************************************** */
+
+/* XXX: this piece of crap really wants some error handling.. */
+static void usbvideo_ClientIncModCount(struct uvd *uvd)
+{
+	if (uvd == NULL) {
+		err("%s: uvd == NULL", __FUNCTION__);
+		return;
+	}
+	if (uvd->handle == NULL) {
+		err("%s: uvd->handle == NULL", __FUNCTION__);
+		return;
+	}
+	if (uvd->handle->md_module == NULL) {
+		err("%s: uvd->handle->md_module == NULL", __FUNCTION__);
+		return;
+	}
+	if (!try_module_get(uvd->handle->md_module)) {
+		err("%s: try_module_get() == 0", __FUNCTION__);
+		return;
+	}
+}
+
+static void usbvideo_ClientDecModCount(struct uvd *uvd)
+{
+	if (uvd == NULL) {
+		err("%s: uvd == NULL", __FUNCTION__);
+		return;
+	}
+	if (uvd->handle == NULL) {
+		err("%s: uvd->handle == NULL", __FUNCTION__);
+		return;
+	}
+	if (uvd->handle->md_module == NULL) {
+		err("%s: uvd->handle->md_module == NULL", __FUNCTION__);
+		return;
+	}
+	module_put(uvd->handle->md_module);
+}
+
+int usbvideo_register(
+	struct usbvideo **pCams,
+	const int num_cams,
+	const int num_extra,
+	const char *driverName,
+	const struct usbvideo_cb *cbTbl,
+	struct module *md,
+	const struct usb_device_id *id_table)
+{
+	struct usbvideo *cams;
+	int i, base_size, result;
+
+	/* Check parameters for sanity */
+	if ((num_cams <= 0) || (pCams == NULL) || (cbTbl == NULL)) {
+		err("%s: Illegal call", __FUNCTION__);
+		return -EINVAL;
+	}
+
+	/* Check registration callback - must be set! */
+	if (cbTbl->probe == NULL) {
+		err("%s: probe() is required!", __FUNCTION__);
+		return -EINVAL;
+	}
+
+	base_size = num_cams * sizeof(struct uvd) + sizeof(struct usbvideo);
+	cams = (struct usbvideo *) kmalloc(base_size, GFP_KERNEL);
+	if (cams == NULL) {
+		err("Failed to allocate %d. bytes for usbvideo struct", base_size);
+		return -ENOMEM;
+	}
+	dbg("%s: Allocated $%p (%d. bytes) for %d. cameras",
+	    __FUNCTION__, cams, base_size, num_cams);
+	memset(cams, 0, base_size);
+
+	/* Copy callbacks, apply defaults for those that are not set */
+	memmove(&cams->cb, cbTbl, sizeof(cams->cb));
+	if (cams->cb.getFrame == NULL)
+		cams->cb.getFrame = usbvideo_GetFrame;
+	if (cams->cb.disconnect == NULL)
+		cams->cb.disconnect = usbvideo_Disconnect;
+	if (cams->cb.startDataPump == NULL)
+		cams->cb.startDataPump = usbvideo_StartDataPump;
+	if (cams->cb.stopDataPump == NULL)
+		cams->cb.stopDataPump = usbvideo_StopDataPump;
+
+	cams->num_cameras = num_cams;
+	cams->cam = (struct uvd *) &cams[1];
+	cams->md_module = md;
+	if (cams->md_module == NULL)
+		warn("%s: module == NULL!", __FUNCTION__);
+	init_MUTEX(&cams->lock);	/* to 1 == available */
+
+	for (i = 0; i < num_cams; i++) {
+		struct uvd *up = &cams->cam[i];
+
+		up->handle = cams;
+
+		/* Allocate user_data separately because of kmalloc's limits */
+		if (num_extra > 0) {
+			up->user_size = num_cams * num_extra;
+			up->user_data = (char *) kmalloc(up->user_size, GFP_KERNEL);
+			if (up->user_data == NULL) {
+				err("%s: Failed to allocate user_data (%d. bytes)",
+				    __FUNCTION__, up->user_size);
+				while (i) {
+					up = &cams->cam[--i];
+					kfree(up->user_data);
+				}
+				kfree(cams);
+				return -ENOMEM;
+			}
+			dbg("%s: Allocated cams[%d].user_data=$%p (%d. bytes)",
+			     __FUNCTION__, i, up->user_data, up->user_size);
+		}
+	}
+
+	/*
+	 * Register ourselves with USB stack.
+	 */
+	strcpy(cams->drvName, (driverName != NULL) ? driverName : "Unknown");
+	cams->usbdrv.name = cams->drvName;
+	cams->usbdrv.probe = cams->cb.probe;
+	cams->usbdrv.disconnect = cams->cb.disconnect;
+	cams->usbdrv.id_table = id_table;
+
+	/*
+	 * Update global handle to usbvideo. This is very important
+	 * because probe() can be called before usb_register() returns.
+	 * If the handle is not yet updated then the probe() will fail.
+	 */
+	*pCams = cams;
+	result = usb_register(&cams->usbdrv);
+	if (result) {
+		for (i = 0; i < num_cams; i++) {
+			struct uvd *up = &cams->cam[i];
+			kfree(up->user_data);
+		}
+		kfree(cams);
+	}
+
+	return result;
+}
+
+EXPORT_SYMBOL(usbvideo_register);
+
+/*
+ * usbvideo_Deregister()
+ *
+ * Procedure frees all usbvideo and user data structures. Be warned that
+ * if you had some dynamically allocated components in ->user field then
+ * you should free them before calling here.
+ */
+void usbvideo_Deregister(struct usbvideo **pCams)
+{
+	struct usbvideo *cams;
+	int i;
+
+	if (pCams == NULL) {
+		err("%s: pCams == NULL", __FUNCTION__);
+		return;
+	}
+	cams = *pCams;
+	if (cams == NULL) {
+		err("%s: cams == NULL", __FUNCTION__);
+		return;
+	}
+
+	dbg("%s: Deregistering %s driver.", __FUNCTION__, cams->drvName);
+	usb_deregister(&cams->usbdrv);
+
+	dbg("%s: Deallocating cams=$%p (%d. cameras)", __FUNCTION__, cams, cams->num_cameras);
+	for (i=0; i < cams->num_cameras; i++) {
+		struct uvd *up = &cams->cam[i];
+		int warning = 0;
+
+		if (up->user_data != NULL) {
+			if (up->user_size <= 0)
+				++warning;
+		} else {
+			if (up->user_size > 0)
+				++warning;
+		}
+		if (warning) {
+			err("%s: Warning: user_data=$%p user_size=%d.",
+			    __FUNCTION__, up->user_data, up->user_size);
+		} else {
+			dbg("%s: Freeing %d. $%p->user_data=$%p",
+			    __FUNCTION__, i, up, up->user_data);
+			kfree(up->user_data);
+		}
+	}
+	/* Whole array was allocated in one chunk */
+	dbg("%s: Freed %d uvd structures",
+	    __FUNCTION__, cams->num_cameras);
+	kfree(cams);
+	*pCams = NULL;
+}
+
+EXPORT_SYMBOL(usbvideo_Deregister);
+
+/*
+ * usbvideo_Disconnect()
+ *
+ * This procedure stops all driver activity. Deallocation of
+ * the interface-private structure (pointed by 'ptr') is done now
+ * (if we don't have any open files) or later, when those files
+ * are closed. After that driver should be removable.
+ *
+ * This code handles surprise removal. The uvd->user is a counter which
+ * increments on open() and decrements on close(). If we see here that
+ * this counter is not 0 then we have a client who still has us opened.
+ * We set uvd->remove_pending flag as early as possible, and after that
+ * all access to the camera will gracefully fail. These failures should
+ * prompt client to (eventually) close the video device, and then - in
+ * usbvideo_v4l_close() - we decrement uvd->uvd_used and usage counter.
+ *
+ * History:
+ * 22-Jan-2000 Added polling of MOD_IN_USE to delay removal until all users gone.
+ * 27-Jan-2000 Reworked to allow pending disconnects; see xxx_close()
+ * 24-May-2000 Corrected to prevent race condition (MOD_xxx_USE_COUNT).
+ * 19-Oct-2000 Moved to usbvideo module.
+ */
+static void usbvideo_Disconnect(struct usb_interface *intf)
+{
+	struct uvd *uvd = usb_get_intfdata (intf);
+	int i;
+
+	if (uvd == NULL) {
+		err("%s($%p): Illegal call.", __FUNCTION__, intf);
+		return;
+	}
+
+	usb_set_intfdata (intf, NULL);
+
+	usbvideo_ClientIncModCount(uvd);
+	if (uvd->debug > 0)
+		info("%s(%p.)", __FUNCTION__, intf);
+
+	down(&uvd->lock);
+	uvd->remove_pending = 1; /* Now all ISO data will be ignored */
+
+	/* At this time we ask to cancel outstanding URBs */
+	GET_CALLBACK(uvd, stopDataPump)(uvd);
+
+	for (i=0; i < USBVIDEO_NUMSBUF; i++)
+		usb_free_urb(uvd->sbuf[i].urb);
+
+	usb_put_dev(uvd->dev);
+	uvd->dev = NULL;    	    /* USB device is no more */
+
+	video_unregister_device(&uvd->vdev);
+	if (uvd->debug > 0)
+		info("%s: Video unregistered.", __FUNCTION__);
+
+	if (uvd->user)
+		info("%s: In use, disconnect pending.", __FUNCTION__);
+	else
+		usbvideo_CameraRelease(uvd);
+	up(&uvd->lock);
+	info("USB camera disconnected.");
+
+	usbvideo_ClientDecModCount(uvd);
+}
+
+/*
+ * usbvideo_CameraRelease()
+ *
+ * This code does final release of uvd. This happens
+ * after the device is disconnected -and- all clients
+ * closed their files.
+ *
+ * History:
+ * 27-Jan-2000 Created.
+ */
+static void usbvideo_CameraRelease(struct uvd *uvd)
+{
+	if (uvd == NULL) {
+		err("%s: Illegal call", __FUNCTION__);
+		return;
+	}
+
+	RingQueue_Free(&uvd->dp);
+	if (VALID_CALLBACK(uvd, userFree))
+		GET_CALLBACK(uvd, userFree)(uvd);
+	uvd->uvd_used = 0;	/* This is atomic, no need to take mutex */
+}
+
+/*
+ * usbvideo_find_struct()
+ *
+ * This code searches the array of preallocated (static) structures
+ * and returns index of the first one that isn't in use. Returns -1
+ * if there are no free structures.
+ *
+ * History:
+ * 27-Jan-2000 Created.
+ */
+static int usbvideo_find_struct(struct usbvideo *cams)
+{
+	int u, rv = -1;
+
+	if (cams == NULL) {
+		err("No usbvideo handle?");
+		return -1;
+	}
+	down(&cams->lock);
+	for (u = 0; u < cams->num_cameras; u++) {
+		struct uvd *uvd = &cams->cam[u];
+		if (!uvd->uvd_used) /* This one is free */
+		{
+			uvd->uvd_used = 1;	/* In use now */
+			init_MUTEX(&uvd->lock);	/* to 1 == available */
+			uvd->dev = NULL;
+			rv = u;
+			break;
+		}
+	}
+	up(&cams->lock);
+	return rv;
+}
+
+static struct file_operations usbvideo_fops = {
+	.owner =  THIS_MODULE,
+	.open =   usbvideo_v4l_open,
+	.release =usbvideo_v4l_close,
+	.read =   usbvideo_v4l_read,
+	.mmap =   usbvideo_v4l_mmap,
+	.ioctl =  usbvideo_v4l_ioctl,
+	.llseek = no_llseek,
+};
+static struct video_device usbvideo_template = {
+	.owner =      THIS_MODULE,
+	.type =       VID_TYPE_CAPTURE,
+	.hardware =   VID_HARDWARE_CPIA,
+	.fops =       &usbvideo_fops,
+};
+
+struct uvd *usbvideo_AllocateDevice(struct usbvideo *cams)
+{
+	int i, devnum;
+	struct uvd *uvd = NULL;
+
+	if (cams == NULL) {
+		err("No usbvideo handle?");
+		return NULL;
+	}
+
+	devnum = usbvideo_find_struct(cams);
+	if (devnum == -1) {
+		err("IBM USB camera driver: Too many devices!");
+		return NULL;
+	}
+	uvd = &cams->cam[devnum];
+	dbg("Device entry #%d. at $%p", devnum, uvd);
+
+	/* Not relying upon caller we increase module counter ourselves */
+	usbvideo_ClientIncModCount(uvd);
+
+	down(&uvd->lock);
+	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
+		uvd->sbuf[i].urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL);
+		if (uvd->sbuf[i].urb == NULL) {
+			err("usb_alloc_urb(%d.) failed.", FRAMES_PER_DESC);
+			uvd->uvd_used = 0;
+			uvd = NULL;
+			goto allocate_done;
+		}
+	}
+	uvd->user=0;
+	uvd->remove_pending = 0;
+	uvd->last_error = 0;
+	RingQueue_Initialize(&uvd->dp);
+
+	/* Initialize video device structure */
+	uvd->vdev = usbvideo_template;
+	sprintf(uvd->vdev.name, "%.20s USB Camera", cams->drvName);
+	/*
+	 * The client is free to overwrite those because we
+	 * return control to the client's probe function right now.
+	 */
+allocate_done:
+	up (&uvd->lock);
+	usbvideo_ClientDecModCount(uvd);
+	return uvd;
+}
+
+EXPORT_SYMBOL(usbvideo_AllocateDevice);
+
+int usbvideo_RegisterVideoDevice(struct uvd *uvd)
+{
+	char tmp1[20], tmp2[20];	/* Buffers for printing */
+
+	if (uvd == NULL) {
+		err("%s: Illegal call.", __FUNCTION__);
+		return -EINVAL;
+	}
+	if (uvd->video_endp == 0) {
+		info("%s: No video endpoint specified; data pump disabled.", __FUNCTION__);
+	}
+	if (uvd->paletteBits == 0) {
+		err("%s: No palettes specified!", __FUNCTION__);
+		return -EINVAL;
+	}
+	if (uvd->defaultPalette == 0) {
+		info("%s: No default palette!", __FUNCTION__);
+	}
+
+	uvd->max_frame_size = VIDEOSIZE_X(uvd->canvas) *
+		VIDEOSIZE_Y(uvd->canvas) * V4L_BYTES_PER_PIXEL;
+	usbvideo_VideosizeToString(tmp1, sizeof(tmp1), uvd->videosize);
+	usbvideo_VideosizeToString(tmp2, sizeof(tmp2), uvd->canvas);
+
+	if (uvd->debug > 0) {
+		info("%s: iface=%d. endpoint=$%02x paletteBits=$%08lx",
+		     __FUNCTION__, uvd->iface, uvd->video_endp, uvd->paletteBits);
+	}
+	if (video_register_device(&uvd->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {
+		err("%s: video_register_device failed", __FUNCTION__);
+		return -EPIPE;
+	}
+	if (uvd->debug > 1) {
+		info("%s: video_register_device() successful", __FUNCTION__);
+	}
+	if (uvd->dev == NULL) {
+		err("%s: uvd->dev == NULL", __FUNCTION__);
+		return -EINVAL;
+	}
+
+	info("%s on /dev/video%d: canvas=%s videosize=%s",
+	     (uvd->handle != NULL) ? uvd->handle->drvName : "???",
+	     uvd->vdev.minor, tmp2, tmp1);
+
+	usb_get_dev(uvd->dev);
+	return 0;
+}
+
+EXPORT_SYMBOL(usbvideo_RegisterVideoDevice);
+
+/* ******************************************************************** */
+
+static int usbvideo_v4l_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct uvd *uvd = file->private_data;
+	unsigned long start = vma->vm_start;
+	unsigned long size  = vma->vm_end-vma->vm_start;
+	unsigned long page, pos;
+
+	if (!CAMERA_IS_OPERATIONAL(uvd))
+		return -EFAULT;
+
+	if (size > (((USBVIDEO_NUMFRAMES * uvd->max_frame_size) + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1)))
+		return -EINVAL;
+
+	pos = (unsigned long) uvd->fbuf;
+	while (size > 0) {
+		page = vmalloc_to_pfn((void *)pos);
+		if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED))
+			return -EAGAIN;
+
+		start += PAGE_SIZE;
+		pos += PAGE_SIZE;
+		if (size > PAGE_SIZE)
+			size -= PAGE_SIZE;
+		else
+			size = 0;
+	}
+
+	return 0;
+}
+
+/*
+ * usbvideo_v4l_open()
+ *
+ * This is part of Video 4 Linux API. The driver can be opened by one
+ * client only (checks internal counter 'uvdser'). The procedure
+ * then allocates buffers needed for video processing.
+ *
+ * History:
+ * 22-Jan-2000 Rewrote, moved scratch buffer allocation here. Now the
+ *             camera is also initialized here (once per connect), at
+ *             expense of V4L client (it waits on open() call).
+ * 27-Jan-2000 Used USBVIDEO_NUMSBUF as number of URB buffers.
+ * 24-May-2000 Corrected to prevent race condition (MOD_xxx_USE_COUNT).
+ */
+static int usbvideo_v4l_open(struct inode *inode, struct file *file)
+{
+	struct video_device *dev = video_devdata(file);
+	struct uvd *uvd = (struct uvd *) dev;
+	const int sb_size = FRAMES_PER_DESC * uvd->iso_packet_len;
+	int i, errCode = 0;
+
+	if (uvd->debug > 1)
+		info("%s($%p)", __FUNCTION__, dev);
+
+	usbvideo_ClientIncModCount(uvd);
+	down(&uvd->lock);
+
+	if (uvd->user) {
+		err("%s: Someone tried to open an already opened device!", __FUNCTION__);
+		errCode = -EBUSY;
+	} else {
+		/* Clear statistics */
+		memset(&uvd->stats, 0, sizeof(uvd->stats));
+
+		/* Clean pointers so we know if we allocated something */
+		for (i=0; i < USBVIDEO_NUMSBUF; i++)
+			uvd->sbuf[i].data = NULL;
+
+		/* Allocate memory for the frame buffers */
+		uvd->fbuf_size = USBVIDEO_NUMFRAMES * uvd->max_frame_size;
+		uvd->fbuf = usbvideo_rvmalloc(uvd->fbuf_size);
+		RingQueue_Allocate(&uvd->dp, RING_QUEUE_SIZE);
+		if ((uvd->fbuf == NULL) ||
+		    (!RingQueue_IsAllocated(&uvd->dp))) {
+			err("%s: Failed to allocate fbuf or dp", __FUNCTION__);
+			errCode = -ENOMEM;
+		} else {
+			/* Allocate all buffers */
+			for (i=0; i < USBVIDEO_NUMFRAMES; i++) {
+				uvd->frame[i].frameState = FrameState_Unused;
+				uvd->frame[i].data = uvd->fbuf + i*(uvd->max_frame_size);
+				/*
+				 * Set default sizes in case IOCTL (VIDIOCMCAPTURE)
+				 * is not used (using read() instead).
+				 */
+				uvd->frame[i].canvas = uvd->canvas;
+				uvd->frame[i].seqRead_Index = 0;
+			}
+			for (i=0; i < USBVIDEO_NUMSBUF; i++) {
+				uvd->sbuf[i].data = kmalloc(sb_size, GFP_KERNEL);
+				if (uvd->sbuf[i].data == NULL) {
+					errCode = -ENOMEM;
+					break;
+				}
+			}
+		}
+		if (errCode != 0) {
+			/* Have to free all that memory */
+			if (uvd->fbuf != NULL) {
+				usbvideo_rvfree(uvd->fbuf, uvd->fbuf_size);
+				uvd->fbuf = NULL;
+			}
+			RingQueue_Free(&uvd->dp);
+			for (i=0; i < USBVIDEO_NUMSBUF; i++) {
+				if (uvd->sbuf[i].data != NULL) {
+					kfree (uvd->sbuf[i].data);
+					uvd->sbuf[i].data = NULL;
+				}
+			}
+		}
+	}
+
+	/* If so far no errors then we shall start the camera */
+	if (errCode == 0) {
+		/* Start data pump if we have valid endpoint */
+		if (uvd->video_endp != 0)
+			errCode = GET_CALLBACK(uvd, startDataPump)(uvd);
+		if (errCode == 0) {
+			if (VALID_CALLBACK(uvd, setupOnOpen)) {
+				if (uvd->debug > 1)
+					info("%s: setupOnOpen callback", __FUNCTION__);
+				errCode = GET_CALLBACK(uvd, setupOnOpen)(uvd);
+				if (errCode < 0) {
+					err("%s: setupOnOpen callback failed (%d.).",
+					    __FUNCTION__, errCode);
+				} else if (uvd->debug > 1) {
+					info("%s: setupOnOpen callback successful", __FUNCTION__);
+				}
+			}
+			if (errCode == 0) {
+				uvd->settingsAdjusted = 0;
+				if (uvd->debug > 1)
+					info("%s: Open succeeded.", __FUNCTION__);
+				uvd->user++;
+				file->private_data = uvd;
+			}
+		}
+	}
+	up(&uvd->lock);
+	if (errCode != 0)
+		usbvideo_ClientDecModCount(uvd);
+	if (uvd->debug > 0)
+		info("%s: Returning %d.", __FUNCTION__, errCode);
+	return errCode;
+}
+
+/*
+ * usbvideo_v4l_close()
+ *
+ * This is part of Video 4 Linux API. The procedure
+ * stops streaming and deallocates all buffers that were earlier
+ * allocated in usbvideo_v4l_open().
+ *
+ * History:
+ * 22-Jan-2000 Moved scratch buffer deallocation here.
+ * 27-Jan-2000 Used USBVIDEO_NUMSBUF as number of URB buffers.
+ * 24-May-2000 Moved MOD_DEC_USE_COUNT outside of code that can sleep.
+ */
+static int usbvideo_v4l_close(struct inode *inode, struct file *file)
+{
+	struct video_device *dev = file->private_data;
+	struct uvd *uvd = (struct uvd *) dev;
+	int i;
+
+	if (uvd->debug > 1)
+		info("%s($%p)", __FUNCTION__, dev);
+
+	down(&uvd->lock);
+	GET_CALLBACK(uvd, stopDataPump)(uvd);
+	usbvideo_rvfree(uvd->fbuf, uvd->fbuf_size);
+	uvd->fbuf = NULL;
+	RingQueue_Free(&uvd->dp);
+
+	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
+		kfree(uvd->sbuf[i].data);
+		uvd->sbuf[i].data = NULL;
+	}
+
+#if USBVIDEO_REPORT_STATS
+	usbvideo_ReportStatistics(uvd);
+#endif    
+
+	uvd->user--;
+	if (uvd->remove_pending) {
+		if (uvd->debug > 0)
+			info("usbvideo_v4l_close: Final disconnect.");
+		usbvideo_CameraRelease(uvd);
+	}
+	up(&uvd->lock);
+	usbvideo_ClientDecModCount(uvd);
+
+	if (uvd->debug > 1)
+		info("%s: Completed.", __FUNCTION__);
+	file->private_data = NULL;
+	return 0;
+}
+
+/*
+ * usbvideo_v4l_ioctl()
+ *
+ * This is part of Video 4 Linux API. The procedure handles ioctl() calls.
+ *
+ * History:
+ * 22-Jan-2000 Corrected VIDIOCSPICT to reject unsupported settings.
+ */
+static int usbvideo_v4l_do_ioctl(struct inode *inode, struct file *file,
+				 unsigned int cmd, void *arg)
+{
+	struct uvd *uvd = file->private_data;
+
+	if (!CAMERA_IS_OPERATIONAL(uvd))
+		return -EIO;
+
+	switch (cmd) {
+		case VIDIOCGCAP:
+		{
+			struct video_capability *b = arg;
+			*b = uvd->vcap;
+			return 0;
+		}
+		case VIDIOCGCHAN:
+		{
+			struct video_channel *v = arg;
+			*v = uvd->vchan;
+			return 0;
+		}
+		case VIDIOCSCHAN:
+		{	
+			struct video_channel *v = arg;
+			if (v->channel != 0)
+				return -EINVAL;
+			return 0;
+		}
+		case VIDIOCGPICT:
+		{
+			struct video_picture *pic = arg;
+			*pic = uvd->vpic;
+			return 0;
+		}
+		case VIDIOCSPICT:
+		{
+			struct video_picture *pic = arg;
+			/*
+			 * Use temporary 'video_picture' structure to preserve our
+			 * own settings (such as color depth, palette) that we
+			 * aren't allowing everyone (V4L client) to change.
+			 */
+			uvd->vpic.brightness = pic->brightness;
+			uvd->vpic.hue = pic->hue;
+			uvd->vpic.colour = pic->colour;
+			uvd->vpic.contrast = pic->contrast;
+			uvd->settingsAdjusted = 0;	/* Will force new settings */
+			return 0;
+		}
+		case VIDIOCSWIN:
+		{
+			struct video_window *vw = arg;
+
+			if(VALID_CALLBACK(uvd, setVideoMode)) {
+				return GET_CALLBACK(uvd, setVideoMode)(uvd, vw);
+			}
+
+			if (vw->flags)
+				return -EINVAL;
+			if (vw->clipcount)
+				return -EINVAL;
+			if (vw->width != VIDEOSIZE_X(uvd->canvas))
+				return -EINVAL;
+			if (vw->height != VIDEOSIZE_Y(uvd->canvas))
+				return -EINVAL;
+
+			return 0;
+		}
+		case VIDIOCGWIN:
+		{
+			struct video_window *vw = arg;
+
+			vw->x = 0;
+			vw->y = 0;
+			vw->width = VIDEOSIZE_X(uvd->videosize);
+			vw->height = VIDEOSIZE_Y(uvd->videosize);
+			vw->chromakey = 0;
+			if (VALID_CALLBACK(uvd, getFPS))
+				vw->flags = GET_CALLBACK(uvd, getFPS)(uvd);
+			else 
+				vw->flags = 10; /* FIXME: do better! */
+			return 0;
+		}
+		case VIDIOCGMBUF:
+		{
+			struct video_mbuf *vm = arg;
+			int i;
+
+			memset(vm, 0, sizeof(*vm));
+			vm->size = uvd->max_frame_size * USBVIDEO_NUMFRAMES;
+			vm->frames = USBVIDEO_NUMFRAMES;
+			for(i = 0; i < USBVIDEO_NUMFRAMES; i++) 
+			  vm->offsets[i] = i * uvd->max_frame_size;
+
+			return 0;
+		}
+		case VIDIOCMCAPTURE:
+		{
+			struct video_mmap *vm = arg;
+
+			if (uvd->debug >= 1) {
+				info("VIDIOCMCAPTURE: frame=%d. size=%dx%d, format=%d.",
+				     vm->frame, vm->width, vm->height, vm->format);
+			}
+			/*
+			 * Check if the requested size is supported. If the requestor
+			 * requests too big a frame then we may be tricked into accessing
+			 * outside of own preallocated frame buffer (in uvd->frame).
+			 * This will cause oops or a security hole. Theoretically, we
+			 * could only clamp the size down to acceptable bounds, but then
+			 * we'd need to figure out how to insert our smaller buffer into
+			 * larger caller's buffer... this is not an easy question. So we
+			 * here just flatly reject too large requests, assuming that the
+			 * caller will resubmit with smaller size. Callers should know
+			 * what size we support (returned by VIDIOCGCAP). However vidcat,
+			 * for one, does not care and allows to ask for any size.
+			 */
+			if ((vm->width > VIDEOSIZE_X(uvd->canvas)) ||
+			    (vm->height > VIDEOSIZE_Y(uvd->canvas))) {
+				if (uvd->debug > 0) {
+					info("VIDIOCMCAPTURE: Size=%dx%d too large; "
+					     "allowed only up to %ldx%ld", vm->width, vm->height,
+					     VIDEOSIZE_X(uvd->canvas), VIDEOSIZE_Y(uvd->canvas));
+				}
+				return -EINVAL;
+			}
+			/* Check if the palette is supported */
+			if (((1L << vm->format) & uvd->paletteBits) == 0) {
+				if (uvd->debug > 0) {
+					info("VIDIOCMCAPTURE: format=%d. not supported"
+					     " (paletteBits=$%08lx)",
+					     vm->format, uvd->paletteBits);
+				}
+				return -EINVAL;
+			}
+			if ((vm->frame < 0) || (vm->frame >= USBVIDEO_NUMFRAMES)) {
+				err("VIDIOCMCAPTURE: vm.frame=%d. !E [0-%d]", vm->frame, USBVIDEO_NUMFRAMES-1);
+				return -EINVAL;
+			}
+			if (uvd->frame[vm->frame].frameState == FrameState_Grabbing) {
+				/* Not an error - can happen */
+			}
+			uvd->frame[vm->frame].request = VIDEOSIZE(vm->width, vm->height);
+			uvd->frame[vm->frame].palette = vm->format;
+
+			/* Mark it as ready */
+			uvd->frame[vm->frame].frameState = FrameState_Ready;
+
+			return usbvideo_NewFrame(uvd, vm->frame);
+		}
+		case VIDIOCSYNC:
+		{
+			int *frameNum = arg;
+			int ret;
+
+			if (*frameNum < 0 || *frameNum >= USBVIDEO_NUMFRAMES)
+				return -EINVAL;
+				
+			if (uvd->debug >= 1)
+				info("VIDIOCSYNC: syncing to frame %d.", *frameNum);
+			if (uvd->flags & FLAGS_NO_DECODING)
+				ret = usbvideo_GetFrame(uvd, *frameNum);
+			else if (VALID_CALLBACK(uvd, getFrame)) {
+				ret = GET_CALLBACK(uvd, getFrame)(uvd, *frameNum);
+				if ((ret < 0) && (uvd->debug >= 1)) {
+					err("VIDIOCSYNC: getFrame() returned %d.", ret);
+				}
+			} else {
+				err("VIDIOCSYNC: getFrame is not set");
+				ret = -EFAULT;
+			}
+
+			/*
+			 * The frame is in FrameState_Done_Hold state. Release it
+			 * right now because its data is already mapped into
+			 * the user space and it's up to the application to
+			 * make use of it until it asks for another frame.
+			 */
+			uvd->frame[*frameNum].frameState = FrameState_Unused;
+			return ret;
+		}
+		case VIDIOCGFBUF:
+		{
+			struct video_buffer *vb = arg;
+
+			memset(vb, 0, sizeof(*vb));
+ 			return 0;
+ 		}
+		case VIDIOCKEY:
+			return 0;
+
+		case VIDIOCCAPTURE:
+			return -EINVAL;
+
+		case VIDIOCSFBUF:
+
+		case VIDIOCGTUNER:
+		case VIDIOCSTUNER:
+
+		case VIDIOCGFREQ:
+		case VIDIOCSFREQ:
+
+		case VIDIOCGAUDIO:
+		case VIDIOCSAUDIO:
+			return -EINVAL;
+
+		default:
+			return -ENOIOCTLCMD;
+	}
+	return 0;
+}
+
+static int usbvideo_v4l_ioctl(struct inode *inode, struct file *file,
+		       unsigned int cmd, unsigned long arg)
+{
+	return video_usercopy(inode, file, cmd, arg, usbvideo_v4l_do_ioctl);
+}
+
+/*
+ * usbvideo_v4l_read()
+ *
+ * This is mostly boring stuff. We simply ask for a frame and when it
+ * arrives copy all the video data from it into user space. There is
+ * no obvious need to override this method.
+ *
+ * History:
+ * 20-Oct-2000 Created.
+ * 01-Nov-2000 Added mutex (uvd->lock).
+ */
+static ssize_t usbvideo_v4l_read(struct file *file, char __user *buf,
+		      size_t count, loff_t *ppos)
+{
+	struct uvd *uvd = file->private_data;
+	int noblock = file->f_flags & O_NONBLOCK;
+	int frmx = -1, i;
+	struct usbvideo_frame *frame;
+
+	if (!CAMERA_IS_OPERATIONAL(uvd) || (buf == NULL))
+		return -EFAULT;
+
+	if (uvd->debug >= 1)
+		info("%s: %Zd. bytes, noblock=%d.", __FUNCTION__, count, noblock);
+
+	down(&uvd->lock);	
+
+	/* See if a frame is completed, then use it. */
+	for(i = 0; i < USBVIDEO_NUMFRAMES; i++) {
+		if ((uvd->frame[i].frameState == FrameState_Done) ||
+		    (uvd->frame[i].frameState == FrameState_Done_Hold) ||
+		    (uvd->frame[i].frameState == FrameState_Error)) {
+			frmx = i;
+			break;
+		}
+	}
+
+	/* FIXME: If we don't start a frame here then who ever does? */
+	if (noblock && (frmx == -1)) {
+		count = -EAGAIN;
+		goto read_done;
+	}
+
+	/*
+	 * If no FrameState_Done, look for a FrameState_Grabbing state.
+	 * See if a frame is in process (grabbing), then use it.
+	 * We will need to wait until it becomes cooked, of course.
+	 */
+	if (frmx == -1) {
+		for(i = 0; i < USBVIDEO_NUMFRAMES; i++) {
+			if (uvd->frame[i].frameState == FrameState_Grabbing) {
+				frmx = i;
+				break;
+			}
+		}
+	}
+
+	/*
+	 * If no frame is active, start one. We don't care which one
+	 * it will be, so #0 is as good as any.
+	 * In read access mode we don't have convenience of VIDIOCMCAPTURE
+	 * to specify the requested palette (video format) on per-frame
+	 * basis. This means that we have to return data in -some- format
+	 * and just hope that the client knows what to do with it.
+	 * The default format is configured in uvd->defaultPalette field
+	 * as one of VIDEO_PALETTE_xxx values. We stuff it into the new
+	 * frame and initiate the frame filling process.
+	 */
+	if (frmx == -1) {
+		if (uvd->defaultPalette == 0) {
+			err("%s: No default palette; don't know what to do!", __FUNCTION__);
+			count = -EFAULT;
+			goto read_done;
+		}
+		frmx = 0;
+		/*
+		 * We have no per-frame control over video size.
+		 * Therefore we only can use whatever size was
+		 * specified as default.
+		 */
+		uvd->frame[frmx].request = uvd->videosize;
+		uvd->frame[frmx].palette = uvd->defaultPalette;
+		uvd->frame[frmx].frameState = FrameState_Ready;
+		usbvideo_NewFrame(uvd, frmx);
+		/* Now frame 0 is supposed to start filling... */
+	}
+
+	/*
+	 * Get a pointer to the active frame. It is either previously
+	 * completed frame or frame in progress but not completed yet.
+	 */
+	frame = &uvd->frame[frmx];
+
+	/*
+	 * Sit back & wait until the frame gets filled and postprocessed.
+	 * If we fail to get the picture [in time] then return the error.
+	 * In this call we specify that we want the frame to be waited for,
+	 * postprocessed and switched into FrameState_Done_Hold state. This
+	 * state is used to hold the frame as "fully completed" between
+	 * subsequent partial reads of the same frame.
+	 */
+	if (frame->frameState != FrameState_Done_Hold) {
+		long rv = -EFAULT;
+		if (uvd->flags & FLAGS_NO_DECODING)
+			rv = usbvideo_GetFrame(uvd, frmx);
+		else if (VALID_CALLBACK(uvd, getFrame))
+			rv = GET_CALLBACK(uvd, getFrame)(uvd, frmx);
+		else
+			err("getFrame is not set");
+		if ((rv != 0) || (frame->frameState != FrameState_Done_Hold)) {
+			count = rv;
+			goto read_done;
+		}
+	}
+
+	/*
+	 * Copy bytes to user space. We allow for partial reads, which
+	 * means that the user application can request read less than
+	 * the full frame size. It is up to the application to issue
+	 * subsequent calls until entire frame is read.
+	 *
+	 * First things first, make sure we don't copy more than we
+	 * have - even if the application wants more. That would be
+	 * a big security embarassment!
+	 */
+	if ((count + frame->seqRead_Index) > frame->seqRead_Length)
+		count = frame->seqRead_Length - frame->seqRead_Index;
+
+	/*
+	 * Copy requested amount of data to user space. We start
+	 * copying from the position where we last left it, which
+	 * will be zero for a new frame (not read before).
+	 */
+	if (copy_to_user(buf, frame->data + frame->seqRead_Index, count)) {
+		count = -EFAULT;
+		goto read_done;
+	}
+
+	/* Update last read position */
+	frame->seqRead_Index += count;
+	if (uvd->debug >= 1) {
+		err("%s: {copy} count used=%Zd, new seqRead_Index=%ld",
+			__FUNCTION__, count, frame->seqRead_Index);
+	}
+
+	/* Finally check if the frame is done with and "release" it */
+	if (frame->seqRead_Index >= frame->seqRead_Length) {
+		/* All data has been read */
+		frame->seqRead_Index = 0;
+
+		/* Mark it as available to be used again. */
+		uvd->frame[frmx].frameState = FrameState_Unused;
+		if (usbvideo_NewFrame(uvd, (frmx + 1) % USBVIDEO_NUMFRAMES)) {
+			err("%s: usbvideo_NewFrame failed.", __FUNCTION__);
+		}
+	}
+read_done:
+	up(&uvd->lock);	
+	return count;
+}
+
+/*
+ * Make all of the blocks of data contiguous
+ */
+static int usbvideo_CompressIsochronous(struct uvd *uvd, struct urb *urb)
+{
+	char *cdata;
+	int i, totlen = 0;
+
+	for (i = 0; i < urb->number_of_packets; i++) {
+		int n = urb->iso_frame_desc[i].actual_length;
+		int st = urb->iso_frame_desc[i].status;
+
+		cdata = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
+
+		/* Detect and ignore errored packets */
+		if (st < 0) {
+			if (uvd->debug >= 1)
+				err("Data error: packet=%d. len=%d. status=%d.", i, n, st);
+			uvd->stats.iso_err_count++;
+			continue;
+		}
+
+		/* Detect and ignore empty packets */
+		if (n <= 0) {
+			uvd->stats.iso_skip_count++;
+			continue;
+		}
+		totlen += n;	/* Little local accounting */
+		RingQueue_Enqueue(&uvd->dp, cdata, n);
+	}
+	return totlen;
+}
+
+static void usbvideo_IsocIrq(struct urb *urb, struct pt_regs *regs)
+{
+	int i, ret, len;
+	struct uvd *uvd = urb->context;
+
+	/* We don't want to do anything if we are about to be removed! */
+	if (!CAMERA_IS_OPERATIONAL(uvd))
+		return;
+#if 0
+	if (urb->actual_length > 0) {
+		info("urb=$%p status=%d. errcount=%d. length=%d.",
+		     urb, urb->status, urb->error_count, urb->actual_length);
+	} else {
+		static int c = 0;
+		if (c++ % 100 == 0)
+			info("No Isoc data");
+	}
+#endif
+
+	if (!uvd->streaming) {
+		if (uvd->debug >= 1)
+			info("Not streaming, but interrupt!");
+		return;
+	}
+	
+	uvd->stats.urb_count++;
+	if (urb->actual_length <= 0)
+		goto urb_done_with;
+
+	/* Copy the data received into ring queue */
+	len = usbvideo_CompressIsochronous(uvd, urb);
+	uvd->stats.urb_length = len;
+	if (len <= 0)
+		goto urb_done_with;
+
+	/* Here we got some data */
+	uvd->stats.data_count += len;
+	RingQueue_WakeUpInterruptible(&uvd->dp);
+
+urb_done_with:
+	for (i = 0; i < FRAMES_PER_DESC; i++) {
+		urb->iso_frame_desc[i].status = 0;
+		urb->iso_frame_desc[i].actual_length = 0;
+	}
+	urb->status = 0;
+	urb->dev = uvd->dev;
+	ret = usb_submit_urb (urb, GFP_KERNEL);
+	if(ret)
+		err("usb_submit_urb error (%d)", ret);
+	return;
+}
+
+/*
+ * usbvideo_StartDataPump()
+ *
+ * History:
+ * 27-Jan-2000 Used ibmcam->iface, ibmcam->ifaceAltActive instead
+ *             of hardcoded values. Simplified by using for loop,
+ *             allowed any number of URBs.
+ */
+static int usbvideo_StartDataPump(struct uvd *uvd)
+{
+	struct usb_device *dev = uvd->dev;
+	int i, errFlag;
+
+	if (uvd->debug > 1)
+		info("%s($%p)", __FUNCTION__, uvd);
+
+	if (!CAMERA_IS_OPERATIONAL(uvd)) {
+		err("%s: Camera is not operational", __FUNCTION__);
+		return -EFAULT;
+	}
+	uvd->curframe = -1;
+
+	/* Alternate interface 1 is is the biggest frame size */
+	i = usb_set_interface(dev, uvd->iface, uvd->ifaceAltActive);
+	if (i < 0) {
+		err("%s: usb_set_interface error", __FUNCTION__);
+		uvd->last_error = i;
+		return -EBUSY;
+	}
+	if (VALID_CALLBACK(uvd, videoStart))
+		GET_CALLBACK(uvd, videoStart)(uvd);
+	else 
+		err("%s: videoStart not set", __FUNCTION__);
+
+	/* We double buffer the Iso lists */
+	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
+		int j, k;
+		struct urb *urb = uvd->sbuf[i].urb;
+		urb->dev = dev;
+		urb->context = uvd;
+		urb->pipe = usb_rcvisocpipe(dev, uvd->video_endp);
+		urb->interval = 1;
+		urb->transfer_flags = URB_ISO_ASAP;
+		urb->transfer_buffer = uvd->sbuf[i].data;
+		urb->complete = usbvideo_IsocIrq;
+		urb->number_of_packets = FRAMES_PER_DESC;
+		urb->transfer_buffer_length = uvd->iso_packet_len * FRAMES_PER_DESC;
+		for (j=k=0; j < FRAMES_PER_DESC; j++, k += uvd->iso_packet_len) {
+			urb->iso_frame_desc[j].offset = k;
+			urb->iso_frame_desc[j].length = uvd->iso_packet_len;
+		}
+	}
+
+	/* Submit all URBs */
+	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
+		errFlag = usb_submit_urb(uvd->sbuf[i].urb, GFP_KERNEL);
+		if (errFlag)
+			err("%s: usb_submit_isoc(%d) ret %d", __FUNCTION__, i, errFlag);
+	}
+
+	uvd->streaming = 1;
+	if (uvd->debug > 1)
+		info("%s: streaming=1 video_endp=$%02x", __FUNCTION__, uvd->video_endp);
+	return 0;
+}
+
+/*
+ * usbvideo_StopDataPump()
+ *
+ * This procedure stops streaming and deallocates URBs. Then it
+ * activates zero-bandwidth alt. setting of the video interface.
+ *
+ * History:
+ * 22-Jan-2000 Corrected order of actions to work after surprise removal.
+ * 27-Jan-2000 Used uvd->iface, uvd->ifaceAltInactive instead of hardcoded values.
+ */
+static void usbvideo_StopDataPump(struct uvd *uvd)
+{
+	int i, j;
+
+	if ((uvd == NULL) || (!uvd->streaming) || (uvd->dev == NULL))
+		return;
+
+	if (uvd->debug > 1)
+		info("%s($%p)", __FUNCTION__, uvd);
+
+	/* Unschedule all of the iso td's */
+	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
+		usb_kill_urb(uvd->sbuf[i].urb);
+	}
+	if (uvd->debug > 1)
+		info("%s: streaming=0", __FUNCTION__);
+	uvd->streaming = 0;
+
+	if (!uvd->remove_pending) {
+		/* Invoke minidriver's magic to stop the camera */
+		if (VALID_CALLBACK(uvd, videoStop))
+			GET_CALLBACK(uvd, videoStop)(uvd);
+		else 
+			err("%s: videoStop not set", __FUNCTION__);
+
+		/* Set packet size to 0 */
+		j = usb_set_interface(uvd->dev, uvd->iface, uvd->ifaceAltInactive);
+		if (j < 0) {
+			err("%s: usb_set_interface() error %d.", __FUNCTION__, j);
+			uvd->last_error = j;
+		}
+	}
+}
+
+/*
+ * usbvideo_NewFrame()
+ *
+ * History:
+ * 29-Mar-00 Added copying of previous frame into the current one.
+ * 6-Aug-00  Added model 3 video sizes, removed redundant width, height.
+ */
+static int usbvideo_NewFrame(struct uvd *uvd, int framenum)
+{
+	struct usbvideo_frame *frame;
+	int n;
+
+	if (uvd->debug > 1)
+		info("usbvideo_NewFrame($%p,%d.)", uvd, framenum);
+
+	/* If we're not grabbing a frame right now and the other frame is */
+	/*  ready to be grabbed into, then use it instead */
+	if (uvd->curframe != -1)
+		return 0;
+
+	/* If necessary we adjust picture settings between frames */
+	if (!uvd->settingsAdjusted) {
+		if (VALID_CALLBACK(uvd, adjustPicture))
+			GET_CALLBACK(uvd, adjustPicture)(uvd);
+		uvd->settingsAdjusted = 1;
+	}
+
+	n = (framenum + 1) % USBVIDEO_NUMFRAMES;
+	if (uvd->frame[n].frameState == FrameState_Ready)
+		framenum = n;
+
+	frame = &uvd->frame[framenum];
+
+	frame->frameState = FrameState_Grabbing;
+	frame->scanstate = ScanState_Scanning;
+	frame->seqRead_Length = 0;	/* Accumulated in xxx_parse_data() */
+	frame->deinterlace = Deinterlace_None;
+	frame->flags = 0; /* No flags yet, up to minidriver (or us) to set them */
+	uvd->curframe = framenum;
+
+	/*
+	 * Normally we would want to copy previous frame into the current one
+	 * before we even start filling it with data; this allows us to stop
+	 * filling at any moment; top portion of the frame will be new and
+	 * bottom portion will stay as it was in previous frame. If we don't
+	 * do that then missing chunks of video stream will result in flickering
+	 * portions of old data whatever it was before.
+	 *
+	 * If we choose not to copy previous frame (to, for example, save few
+	 * bus cycles - the frame can be pretty large!) then we have an option
+	 * to clear the frame before using. If we experience losses in this
+	 * mode then missing picture will be black (no flickering).
+	 *
+	 * Finally, if user chooses not to clean the current frame before
+	 * filling it with data then the old data will be visible if we fail
+	 * to refill entire frame with new data.
+	 */
+	if (!(uvd->flags & FLAGS_SEPARATE_FRAMES)) {
+		/* This copies previous frame into this one to mask losses */
+		int prev = (framenum - 1 + USBVIDEO_NUMFRAMES) % USBVIDEO_NUMFRAMES;
+		memmove(frame->data, uvd->frame[prev].data, uvd->max_frame_size);
+	} else {
+		if (uvd->flags & FLAGS_CLEAN_FRAMES) {
+			/* This provides a "clean" frame but slows things down */
+			memset(frame->data, 0, uvd->max_frame_size);
+		}
+	}
+	return 0;
+}
+
+/*
+ * usbvideo_CollectRawData()
+ *
+ * This procedure can be used instead of 'processData' callback if you
+ * only want to dump the raw data from the camera into the output
+ * device (frame buffer). You can look at it with V4L client, but the
+ * image will be unwatchable. The main purpose of this code and of the
+ * mode FLAGS_NO_DECODING is debugging and capturing of datastreams from
+ * new, unknown cameras. This procedure will be automatically invoked
+ * instead of the specified callback handler when uvd->flags has bit
+ * FLAGS_NO_DECODING set. Therefore, any regular build of any driver
+ * based on usbvideo can use this feature at any time.
+ */
+static void usbvideo_CollectRawData(struct uvd *uvd, struct usbvideo_frame *frame)
+{
+	int n;
+
+	assert(uvd != NULL);
+	assert(frame != NULL);
+
+	/* Try to move data from queue into frame buffer */
+	n = RingQueue_GetLength(&uvd->dp);
+	if (n > 0) {
+		int m;
+		/* See how much space we have left */
+		m = uvd->max_frame_size - frame->seqRead_Length;
+		if (n > m)
+			n = m;
+		/* Now move that much data into frame buffer */
+		RingQueue_Dequeue(
+			&uvd->dp,
+			frame->data + frame->seqRead_Length,
+			m);
+		frame->seqRead_Length += m;
+	}
+	/* See if we filled the frame */
+	if (frame->seqRead_Length >= uvd->max_frame_size) {
+		frame->frameState = FrameState_Done;
+		uvd->curframe = -1;
+		uvd->stats.frame_num++;
+	}
+}
+
+static int usbvideo_GetFrame(struct uvd *uvd, int frameNum)
+{
+	struct usbvideo_frame *frame = &uvd->frame[frameNum];
+
+	if (uvd->debug >= 2)
+		info("%s($%p,%d.)", __FUNCTION__, uvd, frameNum);
+
+	switch (frame->frameState) {
+        case FrameState_Unused:
+		if (uvd->debug >= 2)
+			info("%s: FrameState_Unused", __FUNCTION__);
+		return -EINVAL;
+        case FrameState_Ready:
+        case FrameState_Grabbing:
+        case FrameState_Error:
+        {
+		int ntries, signalPending;
+	redo:
+		if (!CAMERA_IS_OPERATIONAL(uvd)) {
+			if (uvd->debug >= 2)
+				info("%s: Camera is not operational (1)", __FUNCTION__);
+			return -EIO;
+		}
+		ntries = 0; 
+		do {
+			RingQueue_InterruptibleSleepOn(&uvd->dp);
+			signalPending = signal_pending(current);
+			if (!CAMERA_IS_OPERATIONAL(uvd)) {
+				if (uvd->debug >= 2)
+					info("%s: Camera is not operational (2)", __FUNCTION__);
+				return -EIO;
+			}
+			assert(uvd->fbuf != NULL);
+			if (signalPending) {
+				if (uvd->debug >= 2)
+					info("%s: Signal=$%08x", __FUNCTION__, signalPending);
+				if (uvd->flags & FLAGS_RETRY_VIDIOCSYNC) {
+					usbvideo_TestPattern(uvd, 1, 0);
+					uvd->curframe = -1;
+					uvd->stats.frame_num++;
+					if (uvd->debug >= 2)
+						info("%s: Forced test pattern screen", __FUNCTION__);
+					return 0;
+				} else {
+					/* Standard answer: Interrupted! */
+					if (uvd->debug >= 2)
+						info("%s: Interrupted!", __FUNCTION__);
+					return -EINTR;
+				}
+			} else {
+				/* No signals - we just got new data in dp queue */
+				if (uvd->flags & FLAGS_NO_DECODING)
+					usbvideo_CollectRawData(uvd, frame);
+				else if (VALID_CALLBACK(uvd, processData))
+					GET_CALLBACK(uvd, processData)(uvd, frame);
+				else 
+					err("%s: processData not set", __FUNCTION__);
+			}
+		} while (frame->frameState == FrameState_Grabbing);
+		if (uvd->debug >= 2) {
+			info("%s: Grabbing done; state=%d. (%lu. bytes)",
+			     __FUNCTION__, frame->frameState, frame->seqRead_Length);
+		}
+		if (frame->frameState == FrameState_Error) {
+			int ret = usbvideo_NewFrame(uvd, frameNum);
+			if (ret < 0) {
+				err("%s: usbvideo_NewFrame() failed (%d.)", __FUNCTION__, ret);
+				return ret;
+			}
+			goto redo;
+		}
+		/* Note that we fall through to meet our destiny below */
+        }
+        case FrameState_Done:
+		/*
+		 * Do all necessary postprocessing of data prepared in
+		 * "interrupt" code and the collecting code above. The
+		 * frame gets marked as FrameState_Done by queue parsing code.
+		 * This status means that we collected enough data and
+		 * most likely processed it as we went through. However
+		 * the data may need postprocessing, such as deinterlacing
+		 * or picture adjustments implemented in software (horror!)
+		 *
+		 * As soon as the frame becomes "final" it gets promoted to
+		 * FrameState_Done_Hold status where it will remain until the
+		 * caller consumed all the video data from the frame. Then
+		 * the empty shell of ex-frame is thrown out for dogs to eat.
+		 * But we, worried about pets, will recycle the frame!
+		 */
+		uvd->stats.frame_num++;
+		if ((uvd->flags & FLAGS_NO_DECODING) == 0) {
+			if (VALID_CALLBACK(uvd, postProcess))
+				GET_CALLBACK(uvd, postProcess)(uvd, frame);
+			if (frame->flags & USBVIDEO_FRAME_FLAG_SOFTWARE_CONTRAST)
+				usbvideo_SoftwareContrastAdjustment(uvd, frame);
+		}
+		frame->frameState = FrameState_Done_Hold;
+		if (uvd->debug >= 2)
+			info("%s: Entered FrameState_Done_Hold state.", __FUNCTION__);
+		return 0;
+
+	case FrameState_Done_Hold:
+		/*
+		 * We stay in this state indefinitely until someone external,
+		 * like ioctl() or read() call finishes digesting the frame
+		 * data. Then it will mark the frame as FrameState_Unused and
+		 * it will be released back into the wild to roam freely.
+		 */
+		if (uvd->debug >= 2)
+			info("%s: FrameState_Done_Hold state.", __FUNCTION__);
+		return 0;
+	}
+
+	/* Catch-all for other cases. We shall not be here. */
+	err("%s: Invalid state %d.", __FUNCTION__, frame->frameState);
+	frame->frameState = FrameState_Unused;
+	return 0;
+}
+
+/*
+ * usbvideo_DeinterlaceFrame()
+ *
+ * This procedure deinterlaces the given frame. Some cameras produce
+ * only half of scanlines - sometimes only even lines, sometimes only
+ * odd lines. The deinterlacing method is stored in frame->deinterlace
+ * variable.
+ *
+ * Here we scan the frame vertically and replace missing scanlines with
+ * average between surrounding ones - before and after. If we have no
+ * line above then we just copy next line. Similarly, if we need to
+ * create a last line then preceding line is used.
+ */
+void usbvideo_DeinterlaceFrame(struct uvd *uvd, struct usbvideo_frame *frame)
+{
+	if ((uvd == NULL) || (frame == NULL))
+		return;
+
+	if ((frame->deinterlace == Deinterlace_FillEvenLines) ||
+	    (frame->deinterlace == Deinterlace_FillOddLines))
+	{
+		const int v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL;
+		int i = (frame->deinterlace == Deinterlace_FillEvenLines) ? 0 : 1;
+
+		for (; i < VIDEOSIZE_Y(frame->request); i += 2) {
+			const unsigned char *fs1, *fs2;
+			unsigned char *fd;
+			int ip, in, j;	/* Previous and next lines */
+
+			/*
+			 * Need to average lines before and after 'i'.
+			 * If we go out of bounds seeking those lines then
+			 * we point back to existing line.
+			 */
+			ip = i - 1;	/* First, get rough numbers */
+			in = i + 1;
+
+			/* Now validate */
+			if (ip < 0)
+				ip = in;
+			if (in >= VIDEOSIZE_Y(frame->request))
+				in = ip;
+
+			/* Sanity check */
+			if ((ip < 0) || (in < 0) ||
+			    (ip >= VIDEOSIZE_Y(frame->request)) ||
+			    (in >= VIDEOSIZE_Y(frame->request)))
+			{
+				err("Error: ip=%d. in=%d. req.height=%ld.",
+				    ip, in, VIDEOSIZE_Y(frame->request));
+				break;
+			}
+
+			/* Now we need to average lines 'ip' and 'in' to produce line 'i' */
+			fs1 = frame->data + (v4l_linesize * ip);
+			fs2 = frame->data + (v4l_linesize * in);
+			fd = frame->data + (v4l_linesize * i);
+
+			/* Average lines around destination */
+			for (j=0; j < v4l_linesize; j++) {
+				fd[j] = (unsigned char)((((unsigned) fs1[j]) +
+							 ((unsigned)fs2[j])) >> 1);
+			}
+		}
+	}
+
+	/* Optionally display statistics on the screen */
+	if (uvd->flags & FLAGS_OVERLAY_STATS)
+		usbvideo_OverlayStats(uvd, frame);
+}
+
+EXPORT_SYMBOL(usbvideo_DeinterlaceFrame);
+
+/*
+ * usbvideo_SoftwareContrastAdjustment()
+ *
+ * This code adjusts the contrast of the frame, assuming RGB24 format.
+ * As most software image processing, this job is CPU-intensive.
+ * Get a camera that supports hardware adjustment!
+ *
+ * History:
+ * 09-Feb-2001  Created.
+ */
+static void usbvideo_SoftwareContrastAdjustment(struct uvd *uvd, 
+						struct usbvideo_frame *frame)
+{
+	int i, j, v4l_linesize;
+	signed long adj;
+	const int ccm = 128; /* Color correction median - see below */
+
+	if ((uvd == NULL) || (frame == NULL)) {
+		err("%s: Illegal call.", __FUNCTION__);
+		return;
+	}
+	adj = (uvd->vpic.contrast - 0x8000) >> 8; /* -128..+127 = -ccm..+(ccm-1)*/
+	RESTRICT_TO_RANGE(adj, -ccm, ccm+1);
+	if (adj == 0) {
+		/* In rare case of no adjustment */
+		return;
+	}
+	v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL;
+	for (i=0; i < VIDEOSIZE_Y(frame->request); i++) {
+		unsigned char *fd = frame->data + (v4l_linesize * i);
+		for (j=0; j < v4l_linesize; j++) {
+			signed long v = (signed long) fd[j];
+			/* Magnify up to 2 times, reduce down to zero */
+			v = 128 + ((ccm + adj) * (v - 128)) / ccm;
+			RESTRICT_TO_RANGE(v, 0, 0xFF); /* Must flatten tails */
+			fd[j] = (unsigned char) v;
+		}
+	}
+}
+
+MODULE_LICENSE("GPL");