Merge 5.1-rc3 into usb-next

We want the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 files changed, 33 insertions, 12 deletions

diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index e29165027e8b..4a5c9b599c57 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -3206,6 +3206,9 @@ static int __init u132_hcd_init(void)
 	if (!workqueue)
 		return -ENOMEM;
 	retval = platform_driver_register(&u132_platform_driver);
+	if (retval)
+		destroy_workqueue(workqueue);
+
 	return retval;
 }
 
diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c
index c78be578abb0..d932cc31711e 100644
--- a/drivers/usb/host/xhci-dbgcap.c
+++ b/drivers/usb/host/xhci-dbgcap.c
@@ -516,7 +516,6 @@ static int xhci_do_dbc_stop(struct xhci_hcd *xhci)
 		return -1;
 
 	writel(0, &dbc->regs->control);
-	xhci_dbc_mem_cleanup(xhci);
 	dbc->state = DS_DISABLED;
 
 	return 0;
@@ -562,8 +561,10 @@ static void xhci_dbc_stop(struct xhci_hcd *xhci)
 	ret = xhci_do_dbc_stop(xhci);
 	spin_unlock_irqrestore(&dbc->lock, flags);
 
-	if (!ret)
+	if (!ret) {
+		xhci_dbc_mem_cleanup(xhci);
 		pm_runtime_put_sync(xhci_to_hcd(xhci)->self.controller);
+	}
 }
 
 static void
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index e2eece693655..96a740543183 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1545,20 +1545,25 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 	port_index = max_ports;
 	while (port_index--) {
 		u32 t1, t2;
-
+		int retries = 10;
+retry:
 		t1 = readl(ports[port_index]->addr);
 		t2 = xhci_port_state_to_neutral(t1);
 		portsc_buf[port_index] = 0;
 
-		/* Bail out if a USB3 port has a new device in link training */
-		if ((hcd->speed >= HCD_USB3) &&
+		/*
+		 * Give a USB3 port in link training time to finish, but don't
+		 * prevent suspend as port might be stuck
+		 */
+		if ((hcd->speed >= HCD_USB3) && retries-- &&
 		    (t1 & PORT_PLS_MASK) == XDEV_POLLING) {
-			bus_state->bus_suspended = 0;
 			spin_unlock_irqrestore(&xhci->lock, flags);
-			xhci_dbg(xhci, "Bus suspend bailout, port in polling\n");
-			return -EBUSY;
+			msleep(XHCI_PORT_POLLING_LFPS_TIME);
+			spin_lock_irqsave(&xhci->lock, flags);
+			xhci_dbg(xhci, "port %d polling in bus suspend, waiting\n",
+				 port_index);
+			goto retry;
 		}
-
 		/* suspend ports in U0, or bail out for new connect changes */
 		if ((t1 & PORT_PE) && (t1 & PORT_PLS_MASK) == XDEV_U0) {
 			if ((t1 & PORT_CSC) && wake_enabled) {
diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c
index a6e463715779..671bce18782c 100644
--- a/drivers/usb/host/xhci-rcar.c
+++ b/drivers/usb/host/xhci-rcar.c
@@ -246,6 +246,7 @@ int xhci_rcar_init_quirk(struct usb_hcd *hcd)
 	if (!xhci_rcar_wait_for_pll_active(hcd))
 		return -ETIMEDOUT;
 
+	xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 	return xhci_rcar_download_firmware(hcd);
 }
 
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 40fa25c4d041..9215a28dad40 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1647,10 +1647,13 @@ static void handle_port_status(struct xhci_hcd *xhci,
 		}
 	}
 
-	if ((portsc & PORT_PLC) && (portsc & PORT_PLS_MASK) == XDEV_U0 &&
-			DEV_SUPERSPEED_ANY(portsc)) {
+	if ((portsc & PORT_PLC) &&
+	    DEV_SUPERSPEED_ANY(portsc) &&
+	    ((portsc & PORT_PLS_MASK) == XDEV_U0 ||
+	     (portsc & PORT_PLS_MASK) == XDEV_U1 ||
+	     (portsc & PORT_PLS_MASK) == XDEV_U2)) {
 		xhci_dbg(xhci, "resume SS port %d finished\n", port_id);
-		/* We've just brought the device into U0 through either the
+		/* We've just brought the device into U0/1/2 through either the
 		 * Resume state after a device remote wakeup, or through the
 		 * U3Exit state after a host-initiated resume.  If it's a device
 		 * initiated remote wake, don't pass up the link state change,
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 652dc36e3012..9334cdee382a 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -452,6 +452,14 @@ struct xhci_op_regs {
  */
 #define XHCI_DEFAULT_BESL	4
 
+/*
+ * USB3 specification define a 360ms tPollingLFPSTiemout for USB3 ports
+ * to complete link training. usually link trainig completes much faster
+ * so check status 10 times with 36ms sleep in places we need to wait for
+ * polling to complete.
+ */
+#define XHCI_PORT_POLLING_LFPS_TIME  36
+
 /**
  * struct xhci_intr_reg - Interrupt Register Set
  * @irq_pending:	IMAN - Interrupt Management Register.  Used to enable