Merge 3.10-rc5 into usb-next

We need the changes in this branch.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 files changed, 38 insertions, 8 deletions

diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index acff5b8f6e89..f80d0330d548 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -213,7 +213,7 @@ static inline unsigned char tt_start_uframe(struct ehci_hcd *ehci, __hc32 mask)
 }
 
 static const unsigned char
-max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 125, 25 };
+max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 30, 0 };
 
 /* carryover low/fullspeed bandwidth that crosses uframe boundries */
 static inline void carryover_tt_bandwidth(unsigned short tt_usecs[8])
@@ -646,6 +646,10 @@ static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh)
 	/* reschedule QH iff another request is queued */
 	if (!list_empty(&qh->qtd_list) && ehci->rh_state == EHCI_RH_RUNNING) {
 		rc = qh_schedule(ehci, qh);
+		if (rc == 0) {
+			qh_refresh(ehci, qh);
+			qh_link_periodic(ehci, qh);
+		}
 
 		/* An error here likely indicates handshake failure
 		 * or no space left in the schedule.  Neither fault
@@ -653,9 +657,10 @@ static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh)
 		 *
 		 * FIXME kill the now-dysfunctional queued urbs
 		 */
-		if (rc != 0)
+		else {
 			ehci_err(ehci, "can't reschedule qh %p, err %d\n",
 					qh, rc);
+		}
 	}
 
 	/* maybe turn off periodic schedule */
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 832f05ede427..8c0e119efa4e 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1827,6 +1827,9 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	}
 	spin_unlock_irqrestore(&xhci->lock, flags);
 
+	if (!xhci->rh_bw)
+		goto no_bw;
+
 	num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
 	for (i = 0; i < num_ports; i++) {
 		struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
@@ -1845,6 +1848,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 		}
 	}
 
+no_bw:
 	xhci->num_usb2_ports = 0;
 	xhci->num_usb3_ports = 0;
 	xhci->num_active_eps = 0;
@@ -2281,6 +2285,9 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	u32 page_size, temp;
 	int i;
 
+	INIT_LIST_HEAD(&xhci->lpm_failed_devs);
+	INIT_LIST_HEAD(&xhci->cancel_cmd_list);
+
 	page_size = xhci_readl(xhci, &xhci->op_regs->page_size);
 	xhci_dbg(xhci, "Supported page size register = 0x%x\n", page_size);
 	for (i = 0; i < 16; i++) {
@@ -2359,7 +2366,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	xhci->cmd_ring = xhci_ring_alloc(xhci, 1, 1, TYPE_COMMAND, flags);
 	if (!xhci->cmd_ring)
 		goto fail;
-	INIT_LIST_HEAD(&xhci->cancel_cmd_list);
 	xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring);
 	xhci_dbg(xhci, "First segment DMA is 0x%llx\n",
 			(unsigned long long)xhci->cmd_ring->first_seg->dma);
@@ -2470,8 +2476,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	if (xhci_setup_port_arrays(xhci, flags))
 		goto fail;
 
-	INIT_LIST_HEAD(&xhci->lpm_failed_devs);
-
 	/* Enable USB 3.0 device notifications for function remote wake, which
 	 * is necessary for allowing USB 3.0 devices to do remote wakeup from
 	 * U3 (device suspend).
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 1a30c380043c..cc24e39b97d5 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -221,6 +221,14 @@ static void xhci_pci_remove(struct pci_dev *dev)
 static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 {
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
+
+	/*
+	 * Systems with the TI redriver that loses port status change events
+	 * need to have the registers polled during D3, so avoid D3cold.
+	 */
+	if (xhci_compliance_mode_recovery_timer_quirk_check())
+		pdev->no_d3cold = true;
 
 	return xhci_suspend(xhci);
 }
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 8be34f838bd4..77113c1fcb96 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -466,7 +466,7 @@ static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci)
  * Systems:
  * Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820
  */
-static bool compliance_mode_recovery_timer_quirk_check(void)
+bool xhci_compliance_mode_recovery_timer_quirk_check(void)
 {
 	const char *dmi_product_name, *dmi_sys_vendor;
 
@@ -517,7 +517,7 @@ int xhci_init(struct usb_hcd *hcd)
 	xhci_dbg(xhci, "Finished xhci_init\n");
 
 	/* Initializing Compliance Mode Recovery Data If Needed */
-	if (compliance_mode_recovery_timer_quirk_check()) {
+	if (xhci_compliance_mode_recovery_timer_quirk_check()) {
 		xhci->quirks |= XHCI_COMP_MODE_QUIRK;
 		compliance_mode_recovery_timer_init(xhci);
 	}
@@ -956,6 +956,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
 	struct usb_hcd		*secondary_hcd;
 	int			retval = 0;
+	bool			comp_timer_running = false;
 
 	/* Wait a bit if either of the roothubs need to settle from the
 	 * transition into bus suspend.
@@ -993,6 +994,13 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 
 	/* If restore operation fails, re-initialize the HC during resume */
 	if ((temp & STS_SRE) || hibernated) {
+
+		if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+				!(xhci_all_ports_seen_u0(xhci))) {
+			del_timer_sync(&xhci->comp_mode_recovery_timer);
+			xhci_dbg(xhci, "Compliance Mode Recovery Timer deleted!\n");
+		}
+
 		/* Let the USB core know _both_ roothubs lost power. */
 		usb_root_hub_lost_power(xhci->main_hcd->self.root_hub);
 		usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub);
@@ -1035,6 +1043,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		retval = xhci_init(hcd->primary_hcd);
 		if (retval)
 			return retval;
+		comp_timer_running = true;
+
 		xhci_dbg(xhci, "Start the primary HCD\n");
 		retval = xhci_run(hcd->primary_hcd);
 		if (!retval) {
@@ -1076,7 +1086,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 	 * to suffer the Compliance Mode issue again. It doesn't matter if
 	 * ports have entered previously to U0 before system's suspension.
 	 */
-	if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
+	if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && !comp_timer_running)
 		compliance_mode_recovery_timer_init(xhci);
 
 	/* Re-enable port polling. */
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index c306849eb299..c338741a675d 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1883,4 +1883,7 @@ struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci,
 struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
 struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index);
 
+/* xHCI quirks */
+bool xhci_compliance_mode_recovery_timer_quirk_check(void);
+
 #endif /* __LINUX_XHCI_HCD_H */