diff options
| author | Alan Stern <stern@rowland.harvard.edu> | 2013-03-27 16:14:46 -0400 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2013-03-28 11:10:22 -0700 |
| commit | 84ebc10294a3d7be4c66f51070b7aedbaa24de9b (patch) | |
| tree | 36fc8e5387474ee3b47f6ed4224cb491e1ea7155 /drivers/usb/host/ohci-hub.c | |
| parent | 0aa2832dd0d9d8609fd8f15139bc7572541a1215 (diff) | |
| download | linux-84ebc10294a3d7be4c66f51070b7aedbaa24de9b.tar.bz2 | |
USB: remove CONFIG_USB_SUSPEND option
This patch (as1675) removes the CONFIG_USB_SUSPEND option, essentially
replacing it everywhere with CONFIG_PM_RUNTIME (except for one place
in hub.c, where it is replaced with CONFIG_PM because the code needs
to be used in both runtime and system PM). The net result is code
shrinkage and simplification.
There's very little point in keeping CONFIG_USB_SUSPEND because almost
everybody enables it. The few that don't will find that the usbcore
module has gotten somewhat bigger and they will have to take active
measures if they want to prevent hubs from being runtime suspended.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/host/ohci-hub.c')
| -rw-r--r-- | drivers/usb/host/ohci-hub.c | 6 |
1 files changed, 0 insertions, 6 deletions
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index db09dae7b557..60ff4220e8b4 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -580,14 +580,8 @@ static int ohci_start_port_reset (struct usb_hcd *hcd, unsigned port) /* See usb 7.1.7.5: root hubs must issue at least 50 msec reset signaling, * not necessarily continuous ... to guard against resume signaling. - * The short timeout is safe for non-root hubs, and is backward-compatible - * with earlier Linux hosts. */ -#ifdef CONFIG_USB_SUSPEND #define PORT_RESET_MSEC 50 -#else -#define PORT_RESET_MSEC 10 -#endif /* this timer value might be vendor-specific ... */ #define PORT_RESET_HW_MSEC 10 |