summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/ehci-tegra.c
diff options
context:
space:
mode:
authorMikko Perttunen <mperttunen@nvidia.com>2013-07-17 10:37:49 +0300
committerFelipe Balbi <balbi@ti.com>2013-07-29 13:58:18 +0300
commitf5b8c8b6d3b4697f28b818d8784e3e4b2a290022 (patch)
tree085f50f9642745d41ff282b4134a45aafdd6167d /drivers/usb/host/ehci-tegra.c
parent81d5dfe6d8b3ba48ffcaa882783185c07b5d2384 (diff)
downloadlinux-f5b8c8b6d3b4697f28b818d8784e3e4b2a290022.tar.bz2
usb: tegra: Use regulators instead of GPIOs for USB PHY VBUS
The tegra ehci driver has enabled USB vbus regulators directly using GPIOs and the device tree attribute nvidia,vbus-gpio. This is ugly and causes error messages on boot when both the regulator driver and the ehci driver want access to the same GPIO. After this patch, usb vbus regulators for tegra usb phy devices are specified with the device tree attribute vbus-supply = <&x> where x is a regulator defined in the device tree. The old nvidia,vbus-gpio property is no longer supported. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
Diffstat (limited to 'drivers/usb/host/ehci-tegra.c')
-rw-r--r--drivers/usb/host/ehci-tegra.c34
1 files changed, 1 insertions, 33 deletions
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 6ee7ef79b4f8..14c1f35a4b10 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -322,33 +322,6 @@ static void tegra_ehci_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
free_dma_aligned_buffer(urb);
}
-static int setup_vbus_gpio(struct platform_device *pdev,
- struct tegra_ehci_platform_data *pdata)
-{
- int err = 0;
- int gpio;
-
- gpio = pdata->vbus_gpio;
- if (!gpio_is_valid(gpio))
- gpio = of_get_named_gpio(pdev->dev.of_node,
- "nvidia,vbus-gpio", 0);
- if (!gpio_is_valid(gpio))
- return 0;
-
- err = gpio_request(gpio, "vbus_gpio");
- if (err) {
- dev_err(&pdev->dev, "can't request vbus gpio %d", gpio);
- return err;
- }
- err = gpio_direction_output(gpio, 1);
- if (err) {
- dev_err(&pdev->dev, "can't enable vbus\n");
- return err;
- }
-
- return err;
-}
-
static int tegra_ehci_probe(struct platform_device *pdev)
{
struct resource *res;
@@ -376,14 +349,11 @@ static int tegra_ehci_probe(struct platform_device *pdev)
if (!pdev->dev.coherent_dma_mask)
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
- setup_vbus_gpio(pdev, pdata);
-
hcd = usb_create_hcd(&tegra_ehci_hc_driver, &pdev->dev,
dev_name(&pdev->dev));
if (!hcd) {
dev_err(&pdev->dev, "Unable to create HCD\n");
- err = -ENOMEM;
- goto cleanup_vbus_gpio;
+ return -ENOMEM;
}
platform_set_drvdata(pdev, hcd);
ehci = hcd_to_ehci(hcd);
@@ -494,8 +464,6 @@ cleanup_clk_get:
clk_put(tegra->clk);
cleanup_hcd_create:
usb_put_hcd(hcd);
-cleanup_vbus_gpio:
- /* FIXME: Undo setup_vbus_gpio() here */
return err;
}