diff options
author | Christian Engelmayer <christian.engelmayer@frequentis.com> | 2013-04-03 12:18:51 +0200 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2013-04-03 11:38:53 -0700 |
commit | e6604a7fd71f9bd2890e07800e191167d7f5751b (patch) | |
tree | 5afe401f0fd5c82380b536beeba74829c69c6a04 /drivers/usb/host/ehci-hub.c | |
parent | e7d3b6e22c871ba36d052ca99bc8ceca4d546a60 (diff) | |
download | linux-e6604a7fd71f9bd2890e07800e191167d7f5751b.tar.bz2 |
EHCI: Quirk flag for port power handling on overcurrent.
Commit 756aa6b3d536afe85e151138cb03a293998887b3 (ehci-hub: improved
over-current recovery) added port power cycling on overcurrent indications as
needed by the MPC8349 USB controller after resolving of the overcurrent
situation in order to have the host state machine assert the correct port
status again.
Commit 81463c1d707186adbbe534016cd1249edeab0dac (EHCI: only power off port if
over-current is active) solved a thus resulting issue of endless overcurrent
changes in combination with the MAX4967 USB power supply chip that signals
overcurrent when power is not enabled by only powering off a port if the
overcurrent is currently active.
Added quirks flag need_oc_pp_cycle in order to specify the needed behaviour as
there is no common behaviour that can comply with both requirements.
Activated the quirks handling for Freescale 83xx based boards.
Signed-off-by: Christian Engelmayer <christian.engelmayer@frequentis.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/host/ehci-hub.c')
-rw-r--r-- | drivers/usb/host/ehci-hub.c | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 7b04ca96b585..9ab4a4d9768a 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -840,7 +840,8 @@ static int ehci_hub_control ( * power switching; they're allowed to just limit the * current. khubd will turn the power back on. */ - if ((temp & PORT_OC) && HCS_PPC(ehci->hcs_params)) { + if (((temp & PORT_OC) || (ehci->need_oc_pp_cycle)) + && HCS_PPC(ehci->hcs_params)) { ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_POWER), status_reg); |