diff options
| author | Sylvain Rochet <sylvain.rochet@finsecur.com> | 2015-02-12 18:54:05 +0100 |
|---|---|---|
| committer | Felipe Balbi <balbi@ti.com> | 2015-03-11 10:19:36 -0500 |
| commit | bb0a203c3a4e37b4bbb1f8ef55a855618dbba265 (patch) | |
| tree | 3e5df3157ecb51cce707a0b6b51e26476f3b3517 /drivers/usb/gadget | |
| parent | 227ab58cff3c26ec279598112887d6bcca677a0c (diff) | |
| download | linux-bb0a203c3a4e37b4bbb1f8ef55a855618dbba265.tar.bz2 | |
usb: gadget: atmel_usba_udc: Request an auto disabled Vbus signal IRQ
Vbus IRQ handler needs a started UDC driver to work because it uses
udc->driver, which is set by the UDC start handler. The previous way
chosen was to return from interrupt if udc->driver is NULL using a
spinlock around the check.
We now request an auto disabled (IRQ_NOAUTOEN) Vbus signal IRQ instead
of an auto enabled IRQ followed by disable_irq(). This way we remove the
very small timeslot of enabled IRQ which existed previously between
request() and disable(). We don't need anymore to check if udc->driver
is NULL in IRQ handler.
Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Diffstat (limited to 'drivers/usb/gadget')
| -rw-r--r-- | drivers/usb/gadget/udc/atmel_usba_udc.c | 9 |
1 files changed, 2 insertions, 7 deletions
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index e63c6fc8173b..bbbd5f11f767 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -1749,10 +1749,6 @@ static irqreturn_t usba_vbus_irq(int irq, void *devid) spin_lock(&udc->lock); - /* May happen if Vbus pin toggles during probe() */ - if (!udc->driver) - goto out; - vbus = vbus_is_present(udc); if (vbus != udc->vbus_prev) { if (vbus) { @@ -1773,7 +1769,6 @@ static irqreturn_t usba_vbus_irq(int irq, void *devid) udc->vbus_prev = vbus; } -out: spin_unlock(&udc->lock); return IRQ_HANDLED; @@ -2113,6 +2108,8 @@ static int usba_udc_probe(struct platform_device *pdev) if (gpio_is_valid(udc->vbus_pin)) { if (!devm_gpio_request(&pdev->dev, udc->vbus_pin, "atmel_usba_udc")) { + irq_set_status_flags(gpio_to_irq(udc->vbus_pin), + IRQ_NOAUTOEN); ret = devm_request_irq(&pdev->dev, gpio_to_irq(udc->vbus_pin), usba_vbus_irq, 0, @@ -2122,8 +2119,6 @@ static int usba_udc_probe(struct platform_device *pdev) dev_warn(&udc->pdev->dev, "failed to request vbus irq; " "assuming always on\n"); - } else { - disable_irq(gpio_to_irq(udc->vbus_pin)); } } else { /* gpio_request fail so use -EINVAL for gpio_is_valid */ |