Merge tag 'asoc-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v3.15

Quite a busy release for ASoC this time, more on janitorial work than
exciting new features but welcome nontheless:

 - Lots of cleanups from Takashi for enumerations; the original API for
   these was error prone so he's refactored lots of code to use more
   modern APIs which avoid issues.
 - Elimination of the ASoC level wrappers for I2C and SPI moving us
   closer to converting to regmap completely and avoiding some
   randconfig hassle.
 - Provide both manually and transparently locked DAPM APIs rather than
   a mix of the two fixing some concurrency issues.
 - Start converting CODEC drivers to use separate bus interface drivers
   rather than having them all in one file helping avoid dependency
   issues.
 - DPCM support for Intel Haswell and Bay Trail platforms.
 - Lots of work on improvements for simple-card, DaVinci and the Renesas
   rcar drivers.
 - New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the
   CSR SiRF SoC.

4 files changed, 40 insertions, 29 deletions

diff --git a/drivers/usb/gadget/bcm63xx_udc.c b/drivers/usb/gadget/bcm63xx_udc.c
index 888fbb43b338..e969eb809a85 100644
--- a/drivers/usb/gadget/bcm63xx_udc.c
+++ b/drivers/usb/gadget/bcm63xx_udc.c
@@ -360,24 +360,30 @@ static inline void usb_dma_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
 	bcm_writel(val, udc->iudma_regs + off);
 }
 
-static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off)
+static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off, int chan)
 {
-	return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off);
+	return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off +
+			(ENETDMA_CHAN_WIDTH * chan));
 }
 
-static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
+static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off,
+					int chan)
 {
-	bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off);
+	bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off +
+			(ENETDMA_CHAN_WIDTH * chan));
 }
 
-static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off)
+static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off, int chan)
 {
-	return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off);
+	return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off +
+			(ENETDMA_CHAN_WIDTH * chan));
 }
 
-static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
+static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off,
+					int chan)
 {
-	bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off);
+	bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off +
+			(ENETDMA_CHAN_WIDTH * chan));
 }
 
 static inline void set_clocks(struct bcm63xx_udc *udc, bool is_enabled)
@@ -638,7 +644,7 @@ static void iudma_write(struct bcm63xx_udc *udc, struct iudma_ch *iudma,
 	} while (!last_bd);
 
 	usb_dmac_writel(udc, ENETDMAC_CHANCFG_EN_MASK,
-			ENETDMAC_CHANCFG_REG(iudma->ch_idx));
+			ENETDMAC_CHANCFG_REG, iudma->ch_idx);
 }
 
 /**
@@ -694,9 +700,9 @@ static void iudma_reset_channel(struct bcm63xx_udc *udc, struct iudma_ch *iudma)
 		bcm63xx_fifo_reset_ep(udc, max(0, iudma->ep_num));
 
 	/* stop DMA, then wait for the hardware to wrap up */
-	usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG(ch_idx));
+	usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG, ch_idx);
 
-	while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)) &
+	while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx) &
 				   ENETDMAC_CHANCFG_EN_MASK) {
 		udelay(1);
 
@@ -713,10 +719,10 @@ static void iudma_reset_channel(struct bcm63xx_udc *udc, struct iudma_ch *iudma)
 			dev_warn(udc->dev, "forcibly halting IUDMA channel %d\n",
 				 ch_idx);
 			usb_dmac_writel(udc, ENETDMAC_CHANCFG_BUFHALT_MASK,
-					ENETDMAC_CHANCFG_REG(ch_idx));
+					ENETDMAC_CHANCFG_REG, ch_idx);
 		}
 	}
-	usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG(ch_idx));
+	usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG, ch_idx);
 
 	/* don't leave "live" HW-owned entries for the next guy to step on */
 	for (d = iudma->bd_ring; d <= iudma->end_bd; d++)
@@ -728,11 +734,11 @@ static void iudma_reset_channel(struct bcm63xx_udc *udc, struct iudma_ch *iudma)
 
 	/* set up IRQs, UBUS burst size, and BD base for this channel */
 	usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK,
-			ENETDMAC_IRMASK_REG(ch_idx));
-	usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG(ch_idx));
+			ENETDMAC_IRMASK_REG, ch_idx);
+	usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG, ch_idx);
 
-	usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG(ch_idx));
-	usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG(ch_idx));
+	usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG, ch_idx);
+	usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG, ch_idx);
 }
 
 /**
@@ -2035,7 +2041,7 @@ static irqreturn_t bcm63xx_udc_data_isr(int irq, void *dev_id)
 	spin_lock(&udc->lock);
 
 	usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK,
-			ENETDMAC_IR_REG(iudma->ch_idx));
+			ENETDMAC_IR_REG, iudma->ch_idx);
 	bep = iudma->bep;
 	rc = iudma_read(udc, iudma);
 
@@ -2175,18 +2181,18 @@ static int bcm63xx_iudma_dbg_show(struct seq_file *s, void *p)
 		seq_printf(s, " [ep%d]:\n",
 			   max_t(int, iudma_defaults[ch_idx].ep_num, 0));
 		seq_printf(s, "  cfg: %08x; irqstat: %08x; irqmask: %08x; maxburst: %08x\n",
-			   usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)),
-			   usb_dmac_readl(udc, ENETDMAC_IR_REG(ch_idx)),
-			   usb_dmac_readl(udc, ENETDMAC_IRMASK_REG(ch_idx)),
-			   usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG(ch_idx)));
+			   usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx),
+			   usb_dmac_readl(udc, ENETDMAC_IR_REG, ch_idx),
+			   usb_dmac_readl(udc, ENETDMAC_IRMASK_REG, ch_idx),
+			   usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG, ch_idx));
 
-		sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG(ch_idx));
-		sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG(ch_idx));
+		sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG, ch_idx);
+		sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG, ch_idx);
 		seq_printf(s, "  base: %08x; index: %04x_%04x; desc: %04x_%04x %08x\n",
-			   usb_dmas_readl(udc, ENETDMAS_RSTART_REG(ch_idx)),
+			   usb_dmas_readl(udc, ENETDMAS_RSTART_REG, ch_idx),
 			   sram2 >> 16, sram2 & 0xffff,
 			   sram3 >> 16, sram3 & 0xffff,
-			   usb_dmas_readl(udc, ENETDMAS_SRAM4_REG(ch_idx)));
+			   usb_dmas_readl(udc, ENETDMAS_SRAM4_REG, ch_idx));
 		seq_printf(s, "  desc: %d/%d used", iudma->n_bds_used,
 			   iudma->n_bds);
 
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index 306a2b52125c..2b4334394076 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -585,7 +585,6 @@ static ssize_t ffs_epfile_io(struct file *file,
 			     char __user *buf, size_t len, int read)
 {
 	struct ffs_epfile *epfile = file->private_data;
-	struct usb_gadget *gadget = epfile->ffs->gadget;
 	struct ffs_ep *ep;
 	char *data = NULL;
 	ssize_t ret, data_len;
@@ -622,6 +621,12 @@ static ssize_t ffs_epfile_io(struct file *file,
 	/* Allocate & copy */
 	if (!halt) {
 		/*
+		 * if we _do_ wait above, the epfile->ffs->gadget might be NULL
+		 * before the waiting completes, so do not assign to 'gadget' earlier
+		 */
+		struct usb_gadget *gadget = epfile->ffs->gadget;
+
+		/*
 		 * Controller may require buffer size to be aligned to
 		 * maxpacketsize of an out endpoint.
 		 */
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index bf7a56b6d48a..69b76efd11e9 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -1157,7 +1157,7 @@ static int __init printer_bind_config(struct usb_configuration *c)
 
 	usb_gadget_set_selfpowered(gadget);
 
-	if (gadget->is_otg) {
+	if (gadget_is_otg(gadget)) {
 		otg_descriptor.bmAttributes |= USB_OTG_HNP;
 		printer_cfg_driver.descriptors = otg_desc;
 		printer_cfg_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index f04b2c3154de..dd9678f85c58 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -1629,7 +1629,7 @@ static void s3c2410_udc_reinit(struct s3c2410_udc *dev)
 		ep->ep.desc = NULL;
 		ep->halted = 0;
 		INIT_LIST_HEAD(&ep->queue);
-		usb_ep_set_maxpacket_limit(&ep->ep, &ep->ep.maxpacket);
+		usb_ep_set_maxpacket_limit(&ep->ep, ep->ep.maxpacket);
 	}
 }