Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git

Conflicts:
	drivers/mtd/mtd_blkdevs.c

Merge Grant's device-tree bits so that we can apply the subsequent fixes.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

1 files changed, 23 insertions, 18 deletions

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 84c1897188d2..27115b45edc5 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -758,6 +758,9 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 				clear_port_feature(hdev, port1,
 						   USB_PORT_FEAT_ENABLE);
 				portstatus &= ~USB_PORT_STAT_ENABLE;
+			} else {
+				/* Pretend that power was lost for USB3 devs */
+				portstatus &= ~USB_PORT_STAT_ENABLE;
 			}
 		}
 
@@ -2594,16 +2597,14 @@ static int hub_set_address(struct usb_device *udev, int devnum)
 		return 0;
 	if (udev->state != USB_STATE_DEFAULT)
 		return -EINVAL;
-	if (hcd->driver->address_device) {
+	if (hcd->driver->address_device)
 		retval = hcd->driver->address_device(hcd, udev);
-	} else {
+	else
 		retval = usb_control_msg(udev, usb_sndaddr0pipe(),
 				USB_REQ_SET_ADDRESS, 0, devnum, 0,
 				NULL, 0, USB_CTRL_SET_TIMEOUT);
-		if (retval == 0)
-			update_address(udev, devnum);
-	}
 	if (retval == 0) {
+		update_address(udev, devnum);
 		/* Device now using proper address. */
 		usb_set_device_state(udev, USB_STATE_ADDRESS);
 		usb_ep0_reinit(udev);
@@ -2860,13 +2861,16 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	else
 		i = udev->descriptor.bMaxPacketSize0;
 	if (le16_to_cpu(udev->ep0.desc.wMaxPacketSize) != i) {
-		if (udev->speed != USB_SPEED_FULL ||
+		if (udev->speed == USB_SPEED_LOW ||
 				!(i == 8 || i == 16 || i == 32 || i == 64)) {
-			dev_err(&udev->dev, "ep0 maxpacket = %d\n", i);
+			dev_err(&udev->dev, "Invalid ep0 maxpacket: %d\n", i);
 			retval = -EMSGSIZE;
 			goto fail;
 		}
-		dev_dbg(&udev->dev, "ep0 maxpacket = %d\n", i);
+		if (udev->speed == USB_SPEED_FULL)
+			dev_dbg(&udev->dev, "ep0 maxpacket = %d\n", i);
+		else
+			dev_warn(&udev->dev, "Using ep0 maxpacket: %d\n", i);
 		udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i);
 		usb_ep0_reinit(udev);
 	}
@@ -3097,16 +3101,17 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 			udev->speed = USB_SPEED_UNKNOWN;
 
 		/*
-		 * xHCI needs to issue an address device command later
-		 * in the hub_port_init sequence for SS/HS/FS/LS devices.
+		 * Set the address.
+		 * Note xHCI needs to issue an address device command later
+		 * in the hub_port_init sequence for SS/HS/FS/LS devices,
+		 * and xHC will assign an address to the device. But use
+		 * kernel assigned address here, to avoid any address conflict
+		 * issue.
 		 */
-		if (!(hcd->driver->flags & HCD_USB3)) {
-			/* set the address */
-			choose_address(udev);
-			if (udev->devnum <= 0) {
-				status = -ENOTCONN;	/* Don't retry */
-				goto loop;
-			}
+		choose_address(udev);
+		if (udev->devnum <= 0) {
+			status = -ENOTCONN;	/* Don't retry */
+			goto loop;
 		}
 
 		/* reset (non-USB 3.0 devices) and get descriptor */
@@ -3629,7 +3634,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 	}
 
 	if (!parent_hdev) {
-		/* this requires hcd-specific logic; see OHCI hc_restart() */
+		/* this requires hcd-specific logic; see ohci_restart() */
 		dev_dbg(&udev->dev, "%s for root hub!\n", __func__);
 		return -EISDIR;
 	}