diff options
| author | Peter Chen <peter.chen@freescale.com> | 2015-03-12 09:47:53 +0800 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2015-03-18 16:15:14 +0100 |
| commit | a886bd92267c9e3d5c912860c6fb5a68479a7643 (patch) | |
| tree | 5dd95ede497ce232ad9a8ddd6b2e6c2e72850bd4 /drivers/usb/common | |
| parent | bda13e35d584dabf52c9f77e0fe62683ac4d9f86 (diff) | |
| download | linux-a886bd92267c9e3d5c912860c6fb5a68479a7643.tar.bz2 | |
usb: common: otg-fsm: only signal connect after switching to peripheral
We should signal connect (pull up dp) after we have already
at peripheral mode, otherwise, the dp may be toggled due to
we reset controller or do disconnect during the initialization
for peripheral, then, the host may be confused during the
enumeration, eg, it finds the reset can't succeed, but the
device is still there, see below error message.
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 1-0:1.0: unable to enumerate USB device on port 1
Fixes: the issue existed when the otg fsm code was added.
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/common')
| -rw-r--r-- | drivers/usb/common/usb-otg-fsm.c | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/drivers/usb/common/usb-otg-fsm.c b/drivers/usb/common/usb-otg-fsm.c index c6b35b77dab7..61d538aa2346 100644 --- a/drivers/usb/common/usb-otg-fsm.c +++ b/drivers/usb/common/usb-otg-fsm.c @@ -150,9 +150,9 @@ static int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state) break; case OTG_STATE_B_PERIPHERAL: otg_chrg_vbus(fsm, 0); - otg_loc_conn(fsm, 1); otg_loc_sof(fsm, 0); otg_set_protocol(fsm, PROTO_GADGET); + otg_loc_conn(fsm, 1); break; case OTG_STATE_B_WAIT_ACON: otg_chrg_vbus(fsm, 0); @@ -213,10 +213,10 @@ static int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state) break; case OTG_STATE_A_PERIPHERAL: - otg_loc_conn(fsm, 1); otg_loc_sof(fsm, 0); otg_set_protocol(fsm, PROTO_GADGET); otg_drv_vbus(fsm, 1); + otg_loc_conn(fsm, 1); otg_add_timer(fsm, A_BIDL_ADIS); break; case OTG_STATE_A_WAIT_VFALL: |