summaryrefslogtreecommitdiffstats
path: root/drivers/usb/chipidea
diff options
context:
space:
mode:
authorPeter Chen <peter.chen@nxp.com>2020-01-23 14:43:47 +0800
committerPeter Chen <peter.chen@nxp.com>2020-05-06 09:42:28 +0800
commit380a7843688d1fb61dca1382e715f5f40015f132 (patch)
tree1ed59f83b1dbc688c094dcf45beb94eda45a3036 /drivers/usb/chipidea
parent5523f06a19502d08449c1e6ca7e33bfc860f6059 (diff)
downloadlinux-380a7843688d1fb61dca1382e715f5f40015f132.tar.bz2
usb: chipidea: usbmisc_imx: using different ops for imx7d and imx7ulp
imx7ulp uses different USB PHY with imx7d (MXS PHY vs PICO PHY), so the features are supported by non-core register are a little different. For example, autoresume feature is supported by all controllers for imx7ulp, but for imx7d, it is only supported by non-HSIC controller. Besides, these two platforms use different HSIC controller, imx7ulp needs software operation, but imx7d doesn't. Signed-off-by: Peter Chen <peter.chen@nxp.com>
Diffstat (limited to 'drivers/usb/chipidea')
-rw-r--r--drivers/usb/chipidea/usbmisc_imx.c89
1 files changed, 84 insertions, 5 deletions
diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index 8d7e78657e3d..f136876cb4a3 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -100,6 +100,7 @@
#define MX7D_USB_VBUS_WAKEUP_SOURCE_AVALID MX7D_USB_VBUS_WAKEUP_SOURCE(1)
#define MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID MX7D_USB_VBUS_WAKEUP_SOURCE(2)
#define MX7D_USB_VBUS_WAKEUP_SOURCE_SESS_END MX7D_USB_VBUS_WAKEUP_SOURCE(3)
+#define MX7D_USBNC_AUTO_RESUME BIT(2)
/* The default DM/DP value is pull-down */
#define MX7D_USBNC_USB_CTRL2_OPMODE(v) (v << 6)
#define MX7D_USBNC_USB_CTRL2_OPMODE_NON_DRIVING MX7D_USBNC_USB_CTRL2_OPMODE(1)
@@ -638,10 +639,17 @@ static int usbmisc_imx7d_init(struct imx_usbmisc_data *data)
reg |= MX6_BM_PWR_POLARITY;
writel(reg, usbmisc->base);
- reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
- reg &= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK;
- writel(reg | MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID,
- usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ /* SoC non-burst setting */
+ reg = readl(usbmisc->base);
+ writel(reg | MX6_BM_NON_BURST_SETTING, usbmisc->base);
+
+ if (!data->hsic) {
+ reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ reg &= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK;
+ writel(reg | MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID
+ | MX7D_USBNC_AUTO_RESUME,
+ usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ }
spin_unlock_irqrestore(&usbmisc->lock, flags);
@@ -832,6 +840,70 @@ static int imx7d_charger_detection(struct imx_usbmisc_data *data)
return ret;
}
+static int usbmisc_imx7ulp_init(struct imx_usbmisc_data *data)
+{
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ unsigned long flags;
+ u32 reg;
+
+ if (data->index >= 1)
+ return -EINVAL;
+
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ reg = readl(usbmisc->base);
+ if (data->disable_oc) {
+ reg |= MX6_BM_OVER_CUR_DIS;
+ } else {
+ reg &= ~MX6_BM_OVER_CUR_DIS;
+
+ /*
+ * If the polarity is not configured keep it as setup by the
+ * bootloader.
+ */
+ if (data->oc_pol_configured && data->oc_pol_active_low)
+ reg |= MX6_BM_OVER_CUR_POLARITY;
+ else if (data->oc_pol_configured)
+ reg &= ~MX6_BM_OVER_CUR_POLARITY;
+ }
+ /* If the polarity is not set keep it as setup by the bootlader */
+ if (data->pwr_pol == 1)
+ reg |= MX6_BM_PWR_POLARITY;
+
+ writel(reg, usbmisc->base);
+
+ /* SoC non-burst setting */
+ reg = readl(usbmisc->base);
+ writel(reg | MX6_BM_NON_BURST_SETTING, usbmisc->base);
+
+ if (data->hsic) {
+ reg = readl(usbmisc->base);
+ writel(reg | MX6_BM_UTMI_ON_CLOCK, usbmisc->base);
+
+ reg = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET);
+ reg |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON;
+ writel(reg, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET);
+
+ /*
+ * For non-HSIC controller, the autoresume is enabled
+ * at MXS PHY driver (usbphy_ctrl bit18).
+ */
+ reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ writel(reg | MX7D_USBNC_AUTO_RESUME,
+ usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ } else {
+ reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ reg &= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK;
+ writel(reg | MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID,
+ usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ }
+
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+ usbmisc_imx7d_set_wakeup(data, false);
+
+ return 0;
+}
+
static const struct usbmisc_ops imx25_usbmisc_ops = {
.init = usbmisc_imx25_init,
.post = usbmisc_imx25_post,
@@ -873,6 +945,13 @@ static const struct usbmisc_ops imx7d_usbmisc_ops = {
.charger_detection = imx7d_charger_detection,
};
+static const struct usbmisc_ops imx7ulp_usbmisc_ops = {
+ .init = usbmisc_imx7ulp_init,
+ .set_wakeup = usbmisc_imx7d_set_wakeup,
+ .hsic_set_connect = usbmisc_imx6_hsic_set_connect,
+ .hsic_set_clk = usbmisc_imx6_hsic_set_clk,
+};
+
static inline bool is_imx53_usbmisc(struct imx_usbmisc_data *data)
{
struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
@@ -1025,7 +1104,7 @@ static const struct of_device_id usbmisc_imx_dt_ids[] = {
},
{
.compatible = "fsl,imx7ulp-usbmisc",
- .data = &imx7d_usbmisc_ops,
+ .data = &imx7ulp_usbmisc_ops,
},
{ /* sentinel */ }
};