Merge tag 'usb-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb into next

Pull USB driver updates from Greg KH:
 "Here is the big USB driver pull request for 3.16-rc1.

  Nothing huge here, but lots of little things in the USB core, and in
  lots of drivers.  Hopefully the USB power management will be work
  better now that it has been reworked to do per-port power control
  dynamically.  There's also a raft of gadget driver updates and fixes,
  CONFIG_USB_DEBUG is finally gone now that everything has been
  converted over to the dynamic debug inteface, the last hold-out
  drivers were cleaned up and the config option removed.  There were
  also other minor things all through the drivers/usb/ tree, the
  shortlog shows this pretty well.

  All have been in linux-next, including the very last patch, which came
  from linux-next to fix a build issue on some platforms"

* tag 'usb-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (314 commits)
  usb: hub_handle_remote_wakeup() only exists for CONFIG_PM=y
  USB: orinoco_usb: remove CONFIG_USB_DEBUG support
  USB: media: lirc: igorplugusb: remove CONFIG_USB_DEBUG support
  USB: media: streamzap: remove CONFIG_USB_DEBUG
  USB: media: redrat3: remove CONFIG_USB_DEBUG usage
  USB: media: redrat3: remove unneeded tracing macro
  usb: qcserial: add additional Sierra Wireless QMI devices
  usb: host: max3421-hcd: Use module_spi_driver
  usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity
  usb: host: max3421-hcd: fix "spi_rd8" uses dynamic stack allocation warning
  usb: host: max3421-hcd: Fix missing unlock in max3421_urb_enqueue()
  usb: qcserial: add Netgear AirCard 341U
  Documentation: dt-bindings: update xhci-platform DT binding for R-Car H2 and M2
  usb: host: xhci-plat: add xhci_plat_start()
  usb: host: max3421-hcd: Fix potential NULL urb dereference
  Revert "usb: gadget: net2280: Add support for PLX USB338X"
  USB: usbip: remove CONFIG_USB_DEBUG reference
  USB: remove CONFIG_USB_DEBUG from defconfig files
  usb: resume child device when port is powered on
  usb: hub_handle_remote_wakeup() depends on CONFIG_PM_RUNTIME=y
  ...

1 files changed, 36 insertions, 33 deletions

diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 7739c64ef259..69425b3cb6b7 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -20,6 +20,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
+#include <linux/usb/otg-fsm.h>
 #include <linux/usb/chipidea.h>
 
 #include "ci.h"
@@ -27,6 +28,7 @@
 #include "bits.h"
 #include "debug.h"
 #include "otg.h"
+#include "otg_fsm.h"
 
 /* control endpoint description */
 static const struct usb_endpoint_descriptor
@@ -242,26 +244,6 @@ static int hw_port_is_high_speed(struct ci_hdrc *ci)
 }
 
 /**
- * hw_read_intr_enable: returns interrupt enable register
- *
- * This function returns register data
- */
-static u32 hw_read_intr_enable(struct ci_hdrc *ci)
-{
-	return hw_read(ci, OP_USBINTR, ~0);
-}
-
-/**
- * hw_read_intr_status: returns interrupt status register
- *
- * This function returns register data
- */
-static u32 hw_read_intr_status(struct ci_hdrc *ci)
-{
-	return hw_read(ci, OP_USBSTS, ~0);
-}
-
-/**
  * hw_test_and_clear_complete: test & clear complete status (execute without
  *                             interruption)
  * @n: endpoint number
@@ -727,6 +709,8 @@ __acquires(ci->lock)
 	if (ci->status == NULL)
 		retval = -ENOMEM;
 
+	usb_gadget_set_state(&ci->gadget, USB_STATE_DEFAULT);
+
 done:
 	spin_lock(&ci->lock);
 
@@ -841,7 +825,6 @@ __acquires(hwep->lock)
 	if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
 		/* Assume that device is bus powered for now. */
 		*(u16 *)req->buf = ci->remote_wakeup << 1;
-		retval = 0;
 	} else if ((setup->bRequestType & USB_RECIP_MASK) \
 		   == USB_RECIP_ENDPOINT) {
 		dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ?
@@ -883,6 +866,8 @@ isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req)
 	if (ci->setaddr) {
 		hw_usb_set_address(ci, ci->address);
 		ci->setaddr = false;
+		if (ci->address)
+			usb_gadget_set_state(&ci->gadget, USB_STATE_ADDRESS);
 	}
 
 	spin_lock_irqsave(&ci->lock, flags);
@@ -1072,6 +1057,14 @@ __acquires(ci->lock)
 				default:
 					break;
 				}
+				break;
+			case USB_DEVICE_B_HNP_ENABLE:
+				if (ci_otg_is_fsm_mode(ci)) {
+					ci->gadget.b_hnp_enable = 1;
+					err = isr_setup_status_phase(
+							ci);
+				}
+				break;
 			default:
 				goto delegate;
 			}
@@ -1477,7 +1470,7 @@ static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
 			pm_runtime_get_sync(&_gadget->dev);
 			hw_device_reset(ci, USBMODE_CM_DC);
 			hw_device_state(ci, ci->ep0out->qh.dma);
-			dev_dbg(ci->dev, "Connected to host\n");
+			usb_gadget_set_state(_gadget, USB_STATE_POWERED);
 		} else {
 			if (ci->driver)
 				ci->driver->disconnect(&ci->gadget);
@@ -1487,7 +1480,7 @@ static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
 				CI_HDRC_CONTROLLER_STOPPED_EVENT);
 			_gadget_stop_activity(&ci->gadget);
 			pm_runtime_put_sync(&_gadget->dev);
-			dev_dbg(ci->dev, "Disconnected from host\n");
+			usb_gadget_set_state(_gadget, USB_STATE_NOTATTACHED);
 		}
 	}
 
@@ -1655,6 +1648,13 @@ static int ci_udc_start(struct usb_gadget *gadget,
 		return retval;
 
 	ci->driver = driver;
+
+	/* Start otg fsm for B-device */
+	if (ci_otg_is_fsm_mode(ci) && ci->fsm.id) {
+		ci_hdrc_otg_fsm_start(ci);
+		return retval;
+	}
+
 	pm_runtime_get_sync(&ci->gadget.dev);
 	if (ci->vbus_active) {
 		spin_lock_irqsave(&ci->lock, flags);
@@ -1753,6 +1753,8 @@ static irqreturn_t udc_irq(struct ci_hdrc *ci)
 				ci->suspended = 1;
 				spin_unlock(&ci->lock);
 				ci->driver->suspend(&ci->gadget);
+				usb_gadget_set_state(&ci->gadget,
+						USB_STATE_SUSPENDED);
 				spin_lock(&ci->lock);
 			}
 		}
@@ -1779,7 +1781,7 @@ static int udc_start(struct ci_hdrc *ci)
 	ci->gadget.ops          = &usb_gadget_ops;
 	ci->gadget.speed        = USB_SPEED_UNKNOWN;
 	ci->gadget.max_speed    = USB_SPEED_HIGH;
-	ci->gadget.is_otg       = 0;
+	ci->gadget.is_otg       = ci->is_otg ? 1 : 0;
 	ci->gadget.name         = ci->platdata->name;
 
 	INIT_LIST_HEAD(&ci->gadget.ep_list);
@@ -1843,21 +1845,22 @@ void ci_hdrc_gadget_destroy(struct ci_hdrc *ci)
 
 static int udc_id_switch_for_device(struct ci_hdrc *ci)
 {
-	if (ci->is_otg) {
-		ci_clear_otg_interrupt(ci, OTGSC_BSVIS);
-		ci_enable_otg_interrupt(ci, OTGSC_BSVIE);
-	}
+	if (ci->is_otg)
+		/* Clear and enable BSV irq */
+		hw_write_otgsc(ci, OTGSC_BSVIS | OTGSC_BSVIE,
+					OTGSC_BSVIS | OTGSC_BSVIE);
 
 	return 0;
 }
 
 static void udc_id_switch_for_host(struct ci_hdrc *ci)
 {
-	if (ci->is_otg) {
-		/* host doesn't care B_SESSION_VALID event */
-		ci_clear_otg_interrupt(ci, OTGSC_BSVIS);
-		ci_disable_otg_interrupt(ci, OTGSC_BSVIE);
-	}
+	/*
+	 * host doesn't care B_SESSION_VALID event
+	 * so clear and disbale BSV irq
+	 */
+	if (ci->is_otg)
+		hw_write_otgsc(ci, OTGSC_BSVIE | OTGSC_BSVIS, OTGSC_BSVIS);
 }
 
 /**