summaryrefslogtreecommitdiffstats
path: root/drivers/usb/Makefile
diff options
context:
space:
mode:
authorFelipe Balbi <balbi@ti.com>2011-08-19 18:10:58 +0300
committerGreg Kroah-Hartman <gregkh@suse.de>2011-08-22 16:03:11 -0700
commit72246da40f3719af3bfd104a2365b32537c27d83 (patch)
treedb6a4b139c24340e0d5dccab8d9df0b23ab509ef /drivers/usb/Makefile
parent500fdf8becb9c8d51970c7ac6a4fa308a5481ebe (diff)
downloadlinux-72246da40f3719af3bfd104a2365b32537c27d83.tar.bz2
usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI) configurations. Several other parameters can be configured like amount of FIFO space, amount of TX and RX endpoints, amount of Host Interrupters, etc. The current driver has been validated with a virtual model of version 1.73a of that core and with an FPGA burned with version 1.83a of the DRD core. We have support for PCIe bus, which is used on FPGA prototyping, and for the OMAP5, more adaptation (or glue) layers can be easily added and the driver is half prepared to handle any possible configuration the HW engineer has chosen considering we have the information on one of the GHWPARAMS registers to do runtime checking of certain features. More runtime checks can, and should, be added in order to make this driver even more flexible with regards to number of endpoints, FIFO sizes, transfer types, etc. While this supports only the device side, for now, we will add support for Host side (xHCI - see the updated series Sebastian has sent [1]) and OTG after we have it all stabilized. [1] http://marc.info/?l=linux-usb&m=131341992020339&w=2 Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/usb/Makefile')
-rw-r--r--drivers/usb/Makefile2
1 files changed, 2 insertions, 0 deletions
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 30ddf8dc4f72..969b0a50bc98 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -6,6 +6,8 @@
obj-$(CONFIG_USB) += core/
+obj-$(CONFIG_USB_DWC3) += dwc3/
+
obj-$(CONFIG_USB_MON) += mon/
obj-$(CONFIG_PCI) += host/