summaryrefslogtreecommitdiffstats
path: root/drivers/tty
diff options
context:
space:
mode:
authorRomain Izard <romain.izard.pro@gmail.com>2016-02-26 11:15:04 +0100
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2016-03-07 16:11:14 -0800
commitf4a8ab04ddde078a9e9906e1ca8d6821ac91e717 (patch)
tree2c478da3925527e9c52c2b40981acebe251b6c7b /drivers/tty
parent8d2acdb9fc3a544ab0442634531834d6007b5467 (diff)
downloadlinux-f4a8ab04ddde078a9e9906e1ca8d6821ac91e717.tar.bz2
tty/serial: at91: restore dynamic driver binding
In commit c39dfebc7798956fd2140ae6321786ff35da30c3, the modular support code for atmel_serial was removed, as the driver cannot be built as a module. Because no use case was proposed, the dynamic driver binding support was removed as well. The atmel_serial driver can manage up to 7 serial controllers, which are multiplexed with other functions. For example, in the Atmel SAMA5D2, the Flexcom controllers can work as USART, SPI or I2C controllers, and on all Atmel devices serial lines can be reconfigured as GPIOs. My use case uses GPIOs to transfer a firmware update using a custom protocol on the lines used as a serial port during the normal life of the device. If it is not possible to unbind the atmel_serial driver, the GPIO lines remain reserved and prevent this case from working. This patch reinstates the atmel_serial_remove function, and fixes it as it failed to clear the "clk" field on removal, triggering an oops when a device was bound again after being unbound. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/serial/atmel_serial.c35
1 files changed, 34 insertions, 1 deletions
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index b30c93f80899..c0e724633fe3 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -2761,14 +2761,47 @@ err:
return ret;
}
+/*
+ * Even if the driver is not modular, it makes sense to be able to
+ * unbind a device: there can be many bound devices, and there are
+ * situations where dynamic binding and unbinding can be useful.
+ *
+ * For example, a connected device can require a specific firmware update
+ * protocol that needs bitbanging on IO lines, but use the regular serial
+ * port in the normal case.
+ */
+static int atmel_serial_remove(struct platform_device *pdev)
+{
+ struct uart_port *port = platform_get_drvdata(pdev);
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ int ret = 0;
+
+ tasklet_kill(&atmel_port->tasklet);
+
+ device_init_wakeup(&pdev->dev, 0);
+
+ ret = uart_remove_one_port(&atmel_uart, port);
+
+ kfree(atmel_port->rx_ring.buf);
+
+ /* "port" is allocated statically, so we shouldn't free it */
+
+ clear_bit(port->line, atmel_ports_in_use);
+
+ clk_put(atmel_port->clk);
+ atmel_port->clk = NULL;
+
+ return ret;
+}
+
static struct platform_driver atmel_serial_driver = {
.probe = atmel_serial_probe,
+ .remove = atmel_serial_remove,
.suspend = atmel_serial_suspend,
.resume = atmel_serial_resume,
.driver = {
.name = "atmel_usart",
.of_match_table = of_match_ptr(atmel_serial_dt_ids),
- .suppress_bind_attrs = true,
},
};