Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	drivers/net/ethernet/altera/altera_sgdma.c
	net/netlink/af_netlink.c
	net/sched/cls_api.c
	net/sched/sch_api.c

The netlink conflict dealt with moving to netlink_capable() and
netlink_ns_capable() in the 'net' tree vs. supporting 'tc' operations
in non-init namespaces.  These were simple transformations from
netlink_capable to netlink_ns_capable.

The Altera driver conflict was simply code removal overlapping some
void pointer cast cleanups in net-next.

Signed-off-by: David S. Miller <davem@davemloft.net>

7 files changed, 61 insertions, 37 deletions

diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index 94f9e3a38412..0ff7fda0742f 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -190,7 +190,7 @@ static struct tty_driver *hvc_console_device(struct console *c, int *index)
 	return hvc_driver;
 }
 
-static int __init hvc_console_setup(struct console *co, char *options)
+static int hvc_console_setup(struct console *co, char *options)
 {	
 	if (co->index < 0 || co->index >= MAX_NR_HVC_CONSOLES)
 		return -ENODEV;
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 41fe8a047d37..fe9d129c8735 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -2353,8 +2353,12 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file,
 			if (tty->ops->flush_chars)
 				tty->ops->flush_chars(tty);
 		} else {
+			struct n_tty_data *ldata = tty->disc_data;
+
 			while (nr > 0) {
+				mutex_lock(&ldata->output_lock);
 				c = tty->ops->write(tty, b, nr);
+				mutex_unlock(&ldata->output_lock);
 				if (c < 0) {
 					retval = c;
 					goto break_out;
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 81f909c2101f..2d4bd3929e50 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -555,7 +555,7 @@ static void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
 	 */
 	if ((p->port.type == PORT_XR17V35X) ||
 	   (p->port.type == PORT_XR17D15X)) {
-		serial_out(p, UART_EXAR_SLEEP, 0xff);
+		serial_out(p, UART_EXAR_SLEEP, sleep ? 0xff : 0);
 		return;
 	}
 
@@ -1520,7 +1520,7 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 			status = serial8250_rx_chars(up, status);
 	}
 	serial8250_modem_status(up);
-	if (status & UART_LSR_THRE)
+	if (!up->dma && (status & UART_LSR_THRE))
 		serial8250_tx_chars(up);
 
 	spin_unlock_irqrestore(&port->lock, flags);
diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c
index 7046769608d4..ab9096dc3849 100644
--- a/drivers/tty/serial/8250/8250_dma.c
+++ b/drivers/tty/serial/8250/8250_dma.c
@@ -20,12 +20,15 @@ static void __dma_tx_complete(void *param)
 	struct uart_8250_port	*p = param;
 	struct uart_8250_dma	*dma = p->dma;
 	struct circ_buf		*xmit = &p->port.state->xmit;
-
-	dma->tx_running = 0;
+	unsigned long	flags;
 
 	dma_sync_single_for_cpu(dma->txchan->device->dev, dma->tx_addr,
 				UART_XMIT_SIZE, DMA_TO_DEVICE);
 
+	spin_lock_irqsave(&p->port.lock, flags);
+
+	dma->tx_running = 0;
+
 	xmit->tail += dma->tx_size;
 	xmit->tail &= UART_XMIT_SIZE - 1;
 	p->port.icount.tx += dma->tx_size;
@@ -35,6 +38,8 @@ static void __dma_tx_complete(void *param)
 
 	if (!uart_circ_empty(xmit) && !uart_tx_stopped(&p->port))
 		serial8250_tx_dma(p);
+
+	spin_unlock_irqrestore(&p->port.lock, flags);
 }
 
 static void __dma_rx_complete(void *param)
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 23f459600738..1f5505e7f90d 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1446,8 +1446,8 @@ static int s3c24xx_serial_get_poll_char(struct uart_port *port)
 static void s3c24xx_serial_put_poll_char(struct uart_port *port,
 		unsigned char c)
 {
-	unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
-	unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON);
+	unsigned int ufcon = rd_regl(port, S3C2410_UFCON);
+	unsigned int ucon = rd_regl(port, S3C2410_UCON);
 
 	/* not possible to xmit on unconfigured port */
 	if (!s3c24xx_port_configured(ucon))
@@ -1455,7 +1455,7 @@ static void s3c24xx_serial_put_poll_char(struct uart_port *port,
 
 	while (!s3c24xx_serial_console_txrdy(port, ufcon))
 		cpu_relax();
-	wr_regb(cons_uart, S3C2410_UTXH, c);
+	wr_regb(port, S3C2410_UTXH, c);
 }
 
 #endif /* CONFIG_CONSOLE_POLL */
@@ -1463,22 +1463,23 @@ static void s3c24xx_serial_put_poll_char(struct uart_port *port,
 static void
 s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
 {
-	unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
-	unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON);
-
-	/* not possible to xmit on unconfigured port */
-	if (!s3c24xx_port_configured(ucon))
-		return;
+	unsigned int ufcon = rd_regl(port, S3C2410_UFCON);
 
 	while (!s3c24xx_serial_console_txrdy(port, ufcon))
-		barrier();
-	wr_regb(cons_uart, S3C2410_UTXH, ch);
+		cpu_relax();
+	wr_regb(port, S3C2410_UTXH, ch);
 }
 
 static void
 s3c24xx_serial_console_write(struct console *co, const char *s,
 			     unsigned int count)
 {
+	unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON);
+
+	/* not possible to xmit on unconfigured port */
+	if (!s3c24xx_port_configured(ucon))
+		return;
+
 	uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar);
 }
 
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index f26834d262b3..b68550d95a40 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -137,6 +137,11 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
 		return 1;
 
 	/*
+	 * Make sure the device is in D0 state.
+	 */
+	uart_change_pm(state, UART_PM_STATE_ON);
+
+	/*
 	 * Initialise and allocate the transmit and temporary
 	 * buffer.
 	 */
@@ -825,25 +830,29 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port,
 		 * If we fail to request resources for the
 		 * new port, try to restore the old settings.
 		 */
-		if (retval && old_type != PORT_UNKNOWN) {
+		if (retval) {
 			uport->iobase = old_iobase;
 			uport->type = old_type;
 			uport->hub6 = old_hub6;
 			uport->iotype = old_iotype;
 			uport->regshift = old_shift;
 			uport->mapbase = old_mapbase;
-			retval = uport->ops->request_port(uport);
-			/*
-			 * If we failed to restore the old settings,
-			 * we fail like this.
-			 */
-			if (retval)
-				uport->type = PORT_UNKNOWN;
 
-			/*
-			 * We failed anyway.
-			 */
-			retval = -EBUSY;
+			if (old_type != PORT_UNKNOWN) {
+				retval = uport->ops->request_port(uport);
+				/*
+				 * If we failed to restore the old settings,
+				 * we fail like this.
+				 */
+				if (retval)
+					uport->type = PORT_UNKNOWN;
+
+				/*
+				 * We failed anyway.
+				 */
+				retval = -EBUSY;
+			}
+
 			/* Added to return the correct error -Ram Gupta */
 			goto exit;
 		}
@@ -1571,12 +1580,6 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
 	}
 
 	/*
-	 * Make sure the device is in D0 state.
-	 */
-	if (port->count == 1)
-		uart_change_pm(state, UART_PM_STATE_ON);
-
-	/*
 	 * Start up the serial port.
 	 */
 	retval = uart_startup(tty, state, 0);
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 8ebd9f88a6f6..cf78d1985cd8 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -258,7 +258,11 @@ static int __tty_buffer_request_room(struct tty_port *port, size_t size,
 			n->flags = flags;
 			buf->tail = n;
 			b->commit = b->used;
-			smp_mb();
+			/* paired w/ barrier in flush_to_ldisc(); ensures the
+			 * latest commit value can be read before the head is
+			 * advanced to the next buffer
+			 */
+			smp_wmb();
 			b->next = n;
 		} else if (change)
 			size = 0;
@@ -444,17 +448,24 @@ static void flush_to_ldisc(struct work_struct *work)
 
 	while (1) {
 		struct tty_buffer *head = buf->head;
+		struct tty_buffer *next;
 		int count;
 
 		/* Ldisc or user is trying to gain exclusive access */
 		if (atomic_read(&buf->priority))
 			break;
 
+		next = head->next;
+		/* paired w/ barrier in __tty_buffer_request_room();
+		 * ensures commit value read is not stale if the head
+		 * is advancing to the next buffer
+		 */
+		smp_rmb();
 		count = head->commit - head->read;
 		if (!count) {
-			if (head->next == NULL)
+			if (next == NULL)
 				break;
-			buf->head = head->next;
+			buf->head = next;
 			tty_buffer_free(port, head);
 			continue;
 		}