summaryrefslogtreecommitdiffstats
path: root/drivers/tty
diff options
context:
space:
mode:
authorGabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>2016-11-28 19:34:42 -0200
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2016-11-29 20:20:07 +0100
commitf209fa03fc9d131b3108c2e4936181eabab87416 (patch)
tree496ad5de5cccecd1ba1ab8a31301722c45d0fe4e /drivers/tty
parentef510bea5f6c16663428d914699935bdd7913de8 (diff)
downloadlinux-f209fa03fc9d131b3108c2e4936181eabab87416.tar.bz2
serial: 8250_pci: Detach low-level driver during PCI error recovery
During a PCI error recovery, like the ones provoked by EEH in the ppc64 platform, all IO to the device must be blocked while the recovery is completed. Current 8250_pci implementation only suspends the port instead of detaching it, which doesn't prevent incoming accesses like TIOCMGET and TIOCMSET calls from reaching the device. Those end up racing with the EEH recovery, crashing it. Similar races were also observed when opening the device and when shutting it down during recovery. This patch implements a more robust IO blockage for the 8250_pci recovery by unregistering the port at the beginning of the procedure and re-adding it afterwards. Since the port is detached from the uart layer, we can be sure that no request will make through to the device during recovery. This is similar to the solution used by the JSM serial driver. I thank Peter Hurley <peter@hurleysoftware.com> for valuable input on this one over one year ago. Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/serial/8250/8250_pci.c23
1 files changed, 19 insertions, 4 deletions
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 5aeabf732d74..aa0166b6d450 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -52,6 +52,7 @@ struct serial_private {
struct pci_dev *dev;
unsigned int nr;
struct pci_serial_quirk *quirk;
+ const struct pciserial_board *board;
int line[0];
};
@@ -3896,6 +3897,7 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
}
}
priv->nr = i;
+ priv->board = board;
return priv;
err_deinit:
@@ -3906,7 +3908,7 @@ err_out:
}
EXPORT_SYMBOL_GPL(pciserial_init_ports);
-void pciserial_remove_ports(struct serial_private *priv)
+void pciserial_detach_ports(struct serial_private *priv)
{
struct pci_serial_quirk *quirk;
int i;
@@ -3920,7 +3922,11 @@ void pciserial_remove_ports(struct serial_private *priv)
quirk = find_quirk(priv->dev);
if (quirk->exit)
quirk->exit(priv->dev);
+}
+void pciserial_remove_ports(struct serial_private *priv)
+{
+ pciserial_detach_ports(priv);
kfree(priv);
}
EXPORT_SYMBOL_GPL(pciserial_remove_ports);
@@ -5611,7 +5617,7 @@ static pci_ers_result_t serial8250_io_error_detected(struct pci_dev *dev,
return PCI_ERS_RESULT_DISCONNECT;
if (priv)
- pciserial_suspend_ports(priv);
+ pciserial_detach_ports(priv);
pci_disable_device(dev);
@@ -5636,9 +5642,18 @@ static pci_ers_result_t serial8250_io_slot_reset(struct pci_dev *dev)
static void serial8250_io_resume(struct pci_dev *dev)
{
struct serial_private *priv = pci_get_drvdata(dev);
+ const struct pciserial_board *board;
- if (priv)
- pciserial_resume_ports(priv);
+ if (!priv)
+ return;
+
+ board = priv->board;
+ kfree(priv);
+ priv = pciserial_init_ports(dev, board);
+
+ if (!IS_ERR(priv)) {
+ pci_set_drvdata(dev, priv);
+ }
}
static const struct pci_error_handlers serial8250_err_handler = {