diff options
| author | Sebastian Andrzej Siewior <bigeasy@linutronix.de> | 2014-09-10 21:29:58 +0200 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2014-09-26 18:01:56 +0200 |
| commit | 0aa525d11859c1a4d5b78fdc704148e2ae03ae13 (patch) | |
| tree | 716c43ede261700ea3e278b708ff2564ece41425 /drivers/tty | |
| parent | d74d5d1b7288ff9d4439c8c7e0e314cde9743467 (diff) | |
| download | linux-0aa525d11859c1a4d5b78fdc704148e2ae03ae13.tar.bz2 | |
tty: serial: 8250_core: read only RX if there is something in the FIFO
The serial8250_do_startup() function unconditionally clears the
interrupts and for that it reads from the RX-FIFO without checking if
there is a byte in the FIFO or not. This works fine on OMAP4+ HW like
AM335x or DRA7.
OMAP3630 ES1.1 (which means probably all OMAP3 and earlier) does not like
this:
|Unhandled fault: external abort on non-linefetch (0x1028) at 0xfb020000
|Internal error: : 1028 [#1] ARM
|Modules linked in:
|CPU: 0 PID: 1 Comm: swapper Not tainted 3.16.0-00022-g7edcb57-dirty #1213
|task: de0572c0 ti: de058000 task.ti: de058000
|PC is at mem32_serial_in+0xc/0x1c
|LR is at serial8250_do_startup+0x220/0x85c
|Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
|Control: 10c5387d Table: 80004019 DAC: 00000015
|[<c03051d4>] (mem32_serial_in) from [<c0307fe8>] (serial8250_do_startup+0x220/0x85c)
|[<c0307fe8>] (serial8250_do_startup) from [<c0309e00>] (omap_8250_startup+0x5c/0xe0)
|[<c0309e00>] (omap_8250_startup) from [<c030863c>] (serial8250_startup+0x18/0x2c)
|[<c030863c>] (serial8250_startup) from [<c030394c>] (uart_startup+0x78/0x1d8)
|[<c030394c>] (uart_startup) from [<c0304678>] (uart_open+0xe8/0x114)
|[<c0304678>] (uart_open) from [<c02e9e10>] (tty_open+0x1a8/0x5a4)
Reviewed-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
| -rw-r--r-- | drivers/tty/serial/8250/8250_core.c | 11 |
1 files changed, 6 insertions, 5 deletions
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 3cf5c98013e4..547afde9fdda 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -2088,8 +2088,8 @@ int serial8250_do_startup(struct uart_port *port) /* * Clear the interrupt registers. */ - serial_port_in(port, UART_LSR); - serial_port_in(port, UART_RX); + if (serial_port_in(port, UART_LSR) & UART_LSR_DR) + serial_port_in(port, UART_RX); serial_port_in(port, UART_IIR); serial_port_in(port, UART_MSR); @@ -2250,8 +2250,8 @@ dont_test_tx_en: * saved flags to avoid getting false values from polling * routines or the previous session. */ - serial_port_in(port, UART_LSR); - serial_port_in(port, UART_RX); + if (serial_port_in(port, UART_LSR) & UART_LSR_DR) + serial_port_in(port, UART_RX); serial_port_in(port, UART_IIR); serial_port_in(port, UART_MSR); up->lsr_saved_flags = 0; @@ -2344,7 +2344,8 @@ void serial8250_do_shutdown(struct uart_port *port) * Read data port to reset things, and then unlink from * the IRQ chain. */ - serial_port_in(port, UART_RX); + if (serial_port_in(port, UART_LSR) & UART_LSR_DR) + serial_port_in(port, UART_RX); serial8250_rpm_put(up); del_timer_sync(&up->timer); |