summaryrefslogtreecommitdiffstats
path: root/drivers/tty
diff options
context:
space:
mode:
authorJun Nie <jun.nie@linaro.org>2015-07-31 15:49:19 +0800
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2015-08-04 22:07:26 -0700
commit8cd90e50d1408c65c355084b1c7f8f9085f49c6b (patch)
tree38c39695a7d4521ef61c048e440ace2afeb8efdc /drivers/tty
parent09dcc7dfc05b31bf0bbcd1511cd1a2644908d5c8 (diff)
downloadlinux-8cd90e50d1408c65c355084b1c7f8f9085f49c6b.tar.bz2
uart: pl011: Add support to ZTE ZX296702 uart
Support ZTE uart with some registers differing offset. Probe as platform device for not AMBA IP ID is available on ZTE uart. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/serial/Kconfig4
-rw-r--r--drivers/tty/serial/amba-pl011.c195
2 files changed, 183 insertions, 16 deletions
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 687b1ea294b7..ed299b9e6375 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -47,12 +47,12 @@ config SERIAL_AMBA_PL010_CONSOLE
config SERIAL_AMBA_PL011
tristate "ARM AMBA PL011 serial port support"
- depends on ARM_AMBA
+ depends on ARM_AMBA || SOC_ZX296702
select SERIAL_CORE
help
This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have
an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M
- here.
+ here. Say Y or M if you have SOC_ZX296702.
If unsure, say N.
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 017443d092c1..2af09ab153b6 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -74,6 +74,10 @@
/* There is by now at least one vendor with differing details, so handle it */
struct vendor_data {
unsigned int ifls;
+ unsigned int fr_busy;
+ unsigned int fr_dsr;
+ unsigned int fr_cts;
+ unsigned int fr_ri;
unsigned int lcrh_tx;
unsigned int lcrh_rx;
u16 *reg_lut;
@@ -127,6 +131,7 @@ static u16 arm_reg[] = {
[REG_DMACR] = UART011_DMACR,
};
+#ifdef CONFIG_ARM_AMBA
static unsigned int get_fifosize_arm(struct amba_device *dev)
{
return amba_rev(dev) < 3 ? 16 : 32;
@@ -134,6 +139,10 @@ static unsigned int get_fifosize_arm(struct amba_device *dev)
static struct vendor_data vendor_arm = {
.ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
+ .fr_busy = UART01x_FR_BUSY,
+ .fr_dsr = UART01x_FR_DSR,
+ .fr_cts = UART01x_FR_CTS,
+ .fr_ri = UART011_FR_RI,
.lcrh_tx = REG_LCRH,
.lcrh_rx = REG_LCRH,
.reg_lut = arm_reg,
@@ -144,8 +153,13 @@ static struct vendor_data vendor_arm = {
.fixed_options = false,
.get_fifosize = get_fifosize_arm,
};
+#endif
static struct vendor_data vendor_sbsa = {
+ .fr_busy = UART01x_FR_BUSY,
+ .fr_dsr = UART01x_FR_DSR,
+ .fr_cts = UART01x_FR_CTS,
+ .fr_ri = UART011_FR_RI,
.reg_lut = arm_reg,
.oversampling = false,
.dma_threshold = false,
@@ -154,6 +168,7 @@ static struct vendor_data vendor_sbsa = {
.fixed_options = true,
};
+#ifdef CONFIG_ARM_AMBA
static u16 st_reg[] = {
[REG_DR] = UART01x_DR,
[REG_RSR] = UART01x_RSR,
@@ -180,6 +195,10 @@ static unsigned int get_fifosize_st(struct amba_device *dev)
static struct vendor_data vendor_st = {
.ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
+ .fr_busy = UART01x_FR_BUSY,
+ .fr_dsr = UART01x_FR_DSR,
+ .fr_cts = UART01x_FR_CTS,
+ .fr_ri = UART011_FR_RI,
.lcrh_tx = REG_LCRH,
.lcrh_rx = REG_ST_LCRH_RX,
.reg_lut = st_reg,
@@ -190,6 +209,43 @@ static struct vendor_data vendor_st = {
.fixed_options = false,
.get_fifosize = get_fifosize_st,
};
+#endif
+
+#ifdef CONFIG_SOC_ZX296702
+static u16 zte_reg[] = {
+ [REG_DR] = ZX_UART01x_DR,
+ [REG_RSR] = UART01x_RSR,
+ [REG_ST_DMAWM] = ST_UART011_DMAWM,
+ [REG_FR] = ZX_UART01x_FR,
+ [REG_ST_LCRH_RX] = ST_UART011_LCRH_RX,
+ [REG_ILPR] = UART01x_ILPR,
+ [REG_IBRD] = UART011_IBRD,
+ [REG_FBRD] = UART011_FBRD,
+ [REG_LCRH] = ZX_UART011_LCRH_TX,
+ [REG_CR] = ZX_UART011_CR,
+ [REG_IFLS] = ZX_UART011_IFLS,
+ [REG_IMSC] = ZX_UART011_IMSC,
+ [REG_RIS] = ZX_UART011_RIS,
+ [REG_MIS] = ZX_UART011_MIS,
+ [REG_ICR] = ZX_UART011_ICR,
+ [REG_DMACR] = ZX_UART011_DMACR,
+};
+
+static struct vendor_data vendor_zte = {
+ .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
+ .fr_busy = ZX_UART01x_FR_BUSY,
+ .fr_dsr = ZX_UART01x_FR_DSR,
+ .fr_cts = ZX_UART01x_FR_CTS,
+ .fr_ri = ZX_UART011_FR_RI,
+ .lcrh_tx = REG_LCRH,
+ .lcrh_rx = REG_ST_LCRH_RX,
+ .reg_lut = zte_reg,
+ .oversampling = false,
+ .dma_threshold = false,
+ .cts_event_workaround = false,
+ .fixed_options = false,
+};
+#endif
/* Deals with DMA transactions */
@@ -233,6 +289,10 @@ struct uart_amba_port {
unsigned int im; /* interrupt mask */
unsigned int old_status;
unsigned int fifosize; /* vendor-specific */
+ unsigned int fr_busy; /* vendor-specific */
+ unsigned int fr_dsr; /* vendor-specific */
+ unsigned int fr_cts; /* vendor-specific */
+ unsigned int fr_ri; /* vendor-specific */
unsigned int lcrh_tx; /* vendor-specific */
unsigned int lcrh_rx; /* vendor-specific */
unsigned int old_cr; /* state during shutdown */
@@ -1163,7 +1223,7 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap)
return;
/* Disable RX and TX DMA */
- while (pl011_readw(uap, REG_FR) & UART01x_FR_BUSY)
+ while (pl011_readw(uap, REG_FR) & uap->fr_busy)
barrier();
spin_lock_irq(&uap->port.lock);
@@ -1412,11 +1472,11 @@ static void pl011_modem_status(struct uart_amba_port *uap)
if (delta & UART01x_FR_DCD)
uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD);
- if (delta & UART01x_FR_DSR)
+ if (delta & uap->fr_dsr)
uap->port.icount.dsr++;
- if (delta & UART01x_FR_CTS)
- uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS);
+ if (delta & uap->fr_cts)
+ uart_handle_cts_change(&uap->port, status & uap->fr_cts);
wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
}
@@ -1487,7 +1547,7 @@ static unsigned int pl011_tx_empty(struct uart_port *port)
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
unsigned int status = pl011_readw(uap, REG_FR);
- return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
+ return status & (uap->fr_busy|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
}
static unsigned int pl011_get_mctrl(struct uart_port *port)
@@ -1502,9 +1562,9 @@ static unsigned int pl011_get_mctrl(struct uart_port *port)
result |= tiocmbit
TIOCMBIT(UART01x_FR_DCD, TIOCM_CAR);
- TIOCMBIT(UART01x_FR_DSR, TIOCM_DSR);
- TIOCMBIT(UART01x_FR_CTS, TIOCM_CTS);
- TIOCMBIT(UART011_FR_RI, TIOCM_RNG);
+ TIOCMBIT(uap->fr_dsr, TIOCM_DSR);
+ TIOCMBIT(uap->fr_cts, TIOCM_CTS);
+ TIOCMBIT(uap->fr_ri, TIOCM_RNG);
#undef TIOCMBIT
return result;
}
@@ -1720,8 +1780,7 @@ static int pl011_startup(struct uart_port *port)
/*
* initialise the old status of the modem signals
*/
- uap->old_status = pl011_readw(uap, REG_FR) &
- UART01x_FR_MODEM_ANY;
+ uap->old_status = pl011_readw(uap, REG_FR) & UART01x_FR_MODEM_ANY;
/* Startup DMA */
pl011_dma_startup(uap);
@@ -1800,7 +1859,7 @@ static void pl011_disable_interrupts(struct uart_amba_port *uap)
/* mask all interrupts and clear all pending ones */
uap->im = 0;
pl011_writew(uap, uap->im, REG_IMSC);
- pl011_writew(0xffff, REG_ICR);
+ pl011_writew(uap, 0xffff, REG_ICR);
spin_unlock_irq(&uap->port.lock);
}
@@ -2178,7 +2237,7 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
*/
do {
status = pl011_readw(uap, REG_FR);
- } while (status & UART01x_FR_BUSY);
+ } while (status & uap->fr_busy);
if (!uap->vendor->always_enabled)
pl011_writew(uap, old_cr, REG_CR);
@@ -2295,7 +2354,7 @@ static void pl011_putc(struct uart_port *port, int c)
while (pl011_readw(uap, REG_FR) & UART01x_FR_TXFF)
;
pl011_writeb(uap, c, REG_DR);
- while (pl011_readw(uap, REG_FR) & UART01x_FR_BUSY)
+ while (pl011_readw(uap, REG_FR) & uap->fr_busy)
;
}
@@ -2441,6 +2500,7 @@ static int pl011_register_port(struct uart_amba_port *uap)
return ret;
}
+#ifdef CONFIG_ARM_AMBA
static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
{
struct uart_amba_port *uap;
@@ -2464,6 +2524,10 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
uap->reg_lut = vendor->reg_lut;
uap->lcrh_rx = vendor->lcrh_rx;
uap->lcrh_tx = vendor->lcrh_tx;
+ uap->fr_busy = vendor->fr_busy;
+ uap->fr_dsr = vendor->fr_dsr;
+ uap->fr_cts = vendor->fr_cts;
+ uap->fr_ri = vendor->fr_ri;
uap->fifosize = vendor->get_fifosize(dev);
uap->port.irq = dev->irq[0];
uap->port.ops = &amba_pl011_pops;
@@ -2487,6 +2551,67 @@ static int pl011_remove(struct amba_device *dev)
pl011_unregister_port(uap);
return 0;
}
+#endif
+
+#ifdef CONFIG_SOC_ZX296702
+static int zx_uart_probe(struct platform_device *pdev)
+{
+ struct uart_amba_port *uap;
+ struct vendor_data *vendor = &vendor_zte;
+ struct resource *res;
+ int portnr, ret;
+
+ portnr = pl011_find_free_port();
+ if (portnr < 0)
+ return portnr;
+
+ uap = devm_kzalloc(&pdev->dev, sizeof(struct uart_amba_port),
+ GFP_KERNEL);
+ if (!uap) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ uap->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(uap->clk)) {
+ ret = PTR_ERR(uap->clk);
+ goto out;
+ }
+
+ uap->vendor = vendor;
+ uap->reg_lut = vendor->reg_lut;
+ uap->lcrh_rx = vendor->lcrh_rx;
+ uap->lcrh_tx = vendor->lcrh_tx;
+ uap->fr_busy = vendor->fr_busy;
+ uap->fr_dsr = vendor->fr_dsr;
+ uap->fr_cts = vendor->fr_cts;
+ uap->fr_ri = vendor->fr_ri;
+ uap->fifosize = 16;
+ uap->port.irq = platform_get_irq(pdev, 0);
+ uap->port.ops = &amba_pl011_pops;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ ret = pl011_setup_port(&pdev->dev, uap, res, portnr);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(pdev, uap);
+
+ return pl011_register_port(uap);
+out:
+ return ret;
+}
+
+static int zx_uart_remove(struct platform_device *pdev)
+{
+ struct uart_amba_port *uap = platform_get_drvdata(pdev);
+
+ uart_remove_one_port(&amba_reg, &uap->port);
+ pl011_unregister_port(uap);
+ return 0;
+}
+#endif
#ifdef CONFIG_PM_SLEEP
static int pl011_suspend(struct device *dev)
@@ -2544,6 +2669,10 @@ static int sbsa_uart_probe(struct platform_device *pdev)
uap->vendor = &vendor_sbsa;
uap->reg_lut = vendor_sbsa.reg_lut;
+ uap->fr_busy = vendor_sbsa.fr_busy;
+ uap->fr_dsr = vendor_sbsa.fr_dsr;
+ uap->fr_cts = vendor_sbsa.fr_cts;
+ uap->fr_ri = vendor_sbsa.fr_ri;
uap->fifosize = 32;
uap->port.irq = platform_get_irq(pdev, 0);
uap->port.ops = &sbsa_uart_pops;
@@ -2593,6 +2722,7 @@ static struct platform_driver arm_sbsa_uart_platform_driver = {
},
};
+#ifdef CONFIG_ARM_AMBA
static struct amba_id pl011_ids[] = {
{
.id = 0x00041011,
@@ -2618,20 +2748,57 @@ static struct amba_driver pl011_driver = {
.probe = pl011_probe,
.remove = pl011_remove,
};
+#endif
+
+#ifdef CONFIG_SOC_ZX296702
+static const struct of_device_id zx_uart_dt_ids[] = {
+ { .compatible = "zte,zx296702-uart", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, zx_uart_dt_ids);
+
+static struct platform_driver zx_uart_driver = {
+ .driver = {
+ .name = "zx-uart",
+ .owner = THIS_MODULE,
+ .pm = &pl011_dev_pm_ops,
+ .of_match_table = zx_uart_dt_ids,
+ },
+ .probe = zx_uart_probe,
+ .remove = zx_uart_remove,
+};
+#endif
+
static int __init pl011_init(void)
{
+ int ret;
printk(KERN_INFO "Serial: AMBA PL011 UART driver\n");
if (platform_driver_register(&arm_sbsa_uart_platform_driver))
pr_warn("could not register SBSA UART platform driver\n");
- return amba_driver_register(&pl011_driver);
+
+#ifdef CONFIG_SOC_ZX296702
+ ret = platform_driver_register(&zx_uart_driver);
+ if (ret)
+ pr_warn("could not register ZX UART platform driver\n");
+#endif
+
+#ifdef CONFIG_ARM_AMBA
+ ret = amba_driver_register(&pl011_driver);
+#endif
+ return ret;
}
static void __exit pl011_exit(void)
{
platform_driver_unregister(&arm_sbsa_uart_platform_driver);
+#ifdef CONFIG_SOC_ZX296702
+ platform_driver_unregister(&zx_uart_driver);
+#endif
+#ifdef CONFIG_ARM_AMBA
amba_driver_unregister(&pl011_driver);
+#endif
}
/*