summaryrefslogtreecommitdiffstats
path: root/drivers/tty
diff options
context:
space:
mode:
authorHeiko Stuebner <heiko@sntech.de>2017-03-09 07:41:16 +0100
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2017-03-14 10:48:11 +0800
commit09498087f922bb623b66db9e89c6fd11a3799867 (patch)
tree18c24d819f0d40d4f74dbaf187b9a9c7f4cebd4c /drivers/tty
parent4495c08e84729385774601b5146d51d9e5849f81 (diff)
downloadlinux-09498087f922bb623b66db9e89c6fd11a3799867.tar.bz2
serial: 8250_dw: Honor clk_round_rate errors in dw8250_set_termios
clk_round_rate returns a signed long and may possibly return errors in it, for example if there is no possible rate. Till now dw8250_set_termios ignored any error, the signednes and would just use the value as input to clk_set_rate. This of course falls apart if there is an actual error, so check for errors and only try to set a rate if the value is actually valid. This turned up on some Rockchip platforms after commit 6a171b299379 ("serial: 8250_dw: Allow hardware flow control to be used") enabled set_termios callback in all cases, not only ACPI. Fixes: 6a171b299379 ("serial: 8250_dw: Allow hardware flow control to be used") Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/serial/8250/8250_dw.c7
1 files changed, 5 insertions, 2 deletions
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 6ee55a2d47bb..223ac234ddb2 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -257,7 +257,7 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
{
unsigned int baud = tty_termios_baud_rate(termios);
struct dw8250_data *d = p->private_data;
- unsigned int rate;
+ long rate;
int ret;
if (IS_ERR(d->clk) || !old)
@@ -265,7 +265,10 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
clk_disable_unprepare(d->clk);
rate = clk_round_rate(d->clk, baud * 16);
- ret = clk_set_rate(d->clk, rate);
+ if (rate < 0)
+ ret = rate;
+ else
+ ret = clk_set_rate(d->clk, rate);
clk_prepare_enable(d->clk);
if (!ret)