summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial
diff options
context:
space:
mode:
authorNicos Gollan <gtdev@spearhead.de>2011-05-05 21:00:37 +0200
committerGreg Kroah-Hartman <gregkh@suse.de>2011-06-07 09:35:21 -0700
commit7808edcd306f22aeb23775d34e70b7fa2f58b852 (patch)
treeb477dbde7a82a42940a2d5634571d3b1b8626a45 /drivers/tty/serial
parent59c5f46fbe01a00eedf54a23789634438bb80603 (diff)
downloadlinux-7808edcd306f22aeb23775d34e70b7fa2f58b852.tar.bz2
Basic support for Moschip 9900 family I/O chips
Add I/O based support for serial and parallel ports of the following chips: Vendor: Moschip (0x9710) Parts (device IDs) * 9900 (0x9900) * 9904 (0x9904 * 9901 (0x9912, also sold as 9912) * 9922 (0x9922) On all chips but the 9900, a single port is provided per PCI subdevice (subvendor-ID 0xA000, subdevice-IDs 0x1000 for serial, 0x2000 for parallel with proper class codes). In cascading configurations, the 9900 provides two devices per subdevice, with subvendor-ID 0xA000 and subdevice-IDs 0x30ps where p is the number of parallel ports and s the number of serial ports. Basic testing was only done on the serial part of a 9912 to the point where it can be used for a serial kernel console, and advanced features are completely untested. It is possible to reduce functionality of the chips by adding a configuration EEPROM, and the datasheet [1] is inconsistent w.r.t subdevices in the 4s+2s1p and 2s1p+4s configurations. The subdevice-ID 0x3012 should likely read 0x3011 with a serial port in function 3, which would be consistent with the BAR layouts. For now, the drivers ignore subdevices with ID 0x1000 and no class code. The parallel ports are integrated in parport_serial even for purely parallel parts to reduce the footprint of the patch. [1] http://www.moschip.com/data/products/MCS9900/MCS9900_Datasheet.pdf Signed-off-by: Nicos Gollan <gtdev@spearhead.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r--drivers/tty/serial/8250_pci.c104
1 files changed, 103 insertions, 1 deletions
diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c
index 4b4968a294b2..0b255cef57e0 100644
--- a/drivers/tty/serial/8250_pci.c
+++ b/drivers/tty/serial/8250_pci.c
@@ -56,6 +56,9 @@ struct serial_private {
int line[0];
};
+static int pci_default_setup(struct serial_private*,
+ const struct pciserial_board*, struct uart_port*, int);
+
static void moan_device(const char *str, struct pci_dev *dev)
{
printk(KERN_WARNING
@@ -752,6 +755,62 @@ pci_ni8430_setup(struct serial_private *priv,
return setup_port(priv, port, bar, offset, board->reg_shift);
}
+static int pci_netmos_9900_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ unsigned int bar;
+
+ if ((priv->dev->subsystem_device & 0xff00) == 0x3000) {
+ /* netmos apparently orders BARs by datasheet layout, so serial
+ * ports get BARs 0 and 3 (or 1 and 4 for memmapped)
+ */
+ bar = 3 * idx;
+
+ return setup_port(priv, port, bar, 0, board->reg_shift);
+ } else {
+ return pci_default_setup(priv, board, port, idx);
+ }
+}
+
+/* the 99xx series comes with a range of device IDs and a variety
+ * of capabilities:
+ *
+ * 9900 has varying capabilities and can cascade to sub-controllers
+ * (cascading should be purely internal)
+ * 9904 is hardwired with 4 serial ports
+ * 9912 and 9922 are hardwired with 2 serial ports
+ */
+static int pci_netmos_9900_numports(struct pci_dev *dev)
+{
+ unsigned int c = dev->class;
+ unsigned int pi;
+ unsigned short sub_serports;
+
+ pi = (c & 0xff);
+
+ if (pi == 2) {
+ return 1;
+ } else if ((pi == 0) &&
+ (dev->device == PCI_DEVICE_ID_NETMOS_9900)) {
+ /* two possibilities: 0x30ps encodes number of parallel and
+ * serial ports, or 0x1000 indicates *something*. This is not
+ * immediately obvious, since the 2s1p+4s configuration seems
+ * to offer all functionality on functions 0..2, while still
+ * advertising the same function 3 as the 4s+2s1p config.
+ */
+ sub_serports = dev->subsystem_device & 0xf;
+ if (sub_serports > 0) {
+ return sub_serports;
+ } else {
+ printk(KERN_NOTICE "NetMos/Mostech serial driver ignoring port on ambiguous config.\n");
+ return 0;
+ }
+ }
+
+ moan_device("unknown NetMos/Mostech program interface", dev);
+ return 0;
+}
static int pci_netmos_init(struct pci_dev *dev)
{
@@ -761,12 +820,28 @@ static int pci_netmos_init(struct pci_dev *dev)
if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) ||
(dev->device == PCI_DEVICE_ID_NETMOS_9865))
return 0;
+
if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
dev->subsystem_device == 0x0299)
return 0;
+ switch (dev->device) { /* FALLTHROUGH on all */
+ case PCI_DEVICE_ID_NETMOS_9904:
+ case PCI_DEVICE_ID_NETMOS_9912:
+ case PCI_DEVICE_ID_NETMOS_9922:
+ case PCI_DEVICE_ID_NETMOS_9900:
+ num_serial = pci_netmos_9900_numports(dev);
+ break;
+
+ default:
+ if (num_serial == 0 ) {
+ moan_device("unknown NetMos/Mostech device", dev);
+ }
+ }
+
if (num_serial == 0)
return -ENODEV;
+
return num_serial;
}
@@ -1417,7 +1492,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_netmos_init,
- .setup = pci_default_setup,
+ .setup = pci_netmos_9900_setup,
},
/*
* For Oxford Semiconductor Tornado based devices
@@ -1644,6 +1719,7 @@ enum pci_board_num_t {
pbn_ADDIDATA_PCIe_8_3906250,
pbn_ce4100_1_115200,
pbn_omegapci,
+ pbn_NETMOS9900_2s_115200,
};
/*
@@ -2345,6 +2421,11 @@ static struct pciserial_board pci_boards[] __devinitdata = {
.base_baud = 115200,
.uart_offset = 0x200,
},
+ [pbn_NETMOS9900_2s_115200] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 115200,
+ },
};
static const struct pci_device_id softmodem_blacklist[] = {
@@ -3826,6 +3907,27 @@ static struct pci_device_id serial_pci_tbl[] = {
0xA000, 0x1000,
0, 0, pbn_b0_1_115200 },
+ /* the 9901 is a rebranded 9912 */
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9912,
+ 0xA000, 0x1000,
+ 0, 0, pbn_b0_1_115200 },
+
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9922,
+ 0xA000, 0x1000,
+ 0, 0, pbn_b0_1_115200 },
+
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9904,
+ 0xA000, 0x1000,
+ 0, 0, pbn_b0_1_115200 },
+
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
+ 0xA000, 0x1000,
+ 0, 0, pbn_b0_1_115200 },
+
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
+ 0xA000, 0x3002,
+ 0, 0, pbn_NETMOS9900_2s_115200 },
+
/*
* Best Connectivity PCI Multi I/O cards
*/