diff options
| author | Lukas Wunner <lukas@wunner.de> | 2020-05-12 14:40:02 +0200 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2020-05-15 14:47:05 +0200 |
| commit | c150c0f362c1e51c0e3216c9912b85b71d00e70d (patch) | |
| tree | c0cefb23cc8355ab56cf9c988d9d475d739e7247 /drivers/tty/serial/imx.c | |
| parent | e0a851fe6b9b619527bd928aa93caaddd003f70c (diff) | |
| download | linux-c150c0f362c1e51c0e3216c9912b85b71d00e70d.tar.bz2 | |
serial: Allow uart_get_rs485_mode() to return errno
We're about to amend uart_get_rs485_mode() to support a GPIO pin for
rs485 bus termination. Retrieving the GPIO descriptor may fail, so
allow uart_get_rs485_mode() to return an errno and change all callers
to check for failure.
The GPIO descriptor is going to be stored in struct uart_port. Pass
that struct to uart_get_rs485_mode() in lieu of a struct device and
struct serial_rs485, both of which are directly accessible from struct
uart_port.
A few drivers call uart_get_rs485_mode() before setting the struct
device pointer in struct uart_port. Shuffle those calls around where
necessary.
[Heiko Stuebner did the ar933x_uart.c portion, hence his Signed-off-by.]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/271e814af4b0db3bffbbb74abf2b46b75add4516.1589285873.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial/imx.c')
| -rw-r--r-- | drivers/tty/serial/imx.c | 6 |
1 files changed, 5 insertions, 1 deletions
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index f4023d9d8e7a..986d902fb7fe 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -2304,7 +2304,11 @@ static int imx_uart_probe(struct platform_device *pdev) sport->ucr4 = readl(sport->port.membase + UCR4); sport->ufcr = readl(sport->port.membase + UFCR); - uart_get_rs485_mode(&pdev->dev, &sport->port.rs485); + ret = uart_get_rs485_mode(&sport->port); + if (ret) { + clk_disable_unprepare(sport->clk_ipg); + return ret; + } if (sport->port.rs485.flags & SER_RS485_ENABLED && (!sport->have_rtscts && !sport->have_rtsgpio)) |