tty: move drivers/serial/ to drivers/tty/serial/

The serial drivers are really just tty drivers, so move them to
drivers/tty/ to make things a bit neater overall.

This is part of the tty/serial driver movement proceedure as proposed by
Arnd Bergmann and approved by everyone involved a number of months ago.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl>
Cc: Michael H. Warfield <mhw@wittsend.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 955 insertions, 0 deletions

diff --git a/drivers/tty/serial/dz.c b/drivers/tty/serial/dz.c
new file mode 100644
index 000000000000..57421d776329
--- /dev/null
+++ b/drivers/tty/serial/dz.c
@@ -0,0 +1,955 @@
+/*
+ * dz.c: Serial port driver for DECstations equipped
+ *       with the DZ chipset.
+ *
+ * Copyright (C) 1998 Olivier A. D. Lebaillif
+ *
+ * Email: olivier.lebaillif@ifrsys.com
+ *
+ * Copyright (C) 2004, 2006, 2007  Maciej W. Rozycki
+ *
+ * [31-AUG-98] triemer
+ * Changed IRQ to use Harald's dec internals interrupts.h
+ * removed base_addr code - moving address assignment to setup.c
+ * Changed name of dz_init to rs_init to be consistent with tc code
+ * [13-NOV-98] triemer fixed code to receive characters
+ *    after patches by harald to irq code.
+ * [09-JAN-99] triemer minor fix for schedule - due to removal of timeout
+ *            field from "current" - somewhere between 2.1.121 and 2.1.131
+ Qua Jun 27 15:02:26 BRT 2001
+ * [27-JUN-2001] Arnaldo Carvalho de Melo <acme@conectiva.com.br> - cleanups
+ *
+ * Parts (C) 1999 David Airlie, airlied@linux.ie
+ * [07-SEP-99] Bugfixes
+ *
+ * [06-Jan-2002] Russell King <rmk@arm.linux.org.uk>
+ * Converted to new serial core
+ */
+
+#undef DEBUG_DZ
+
+#if defined(CONFIG_SERIAL_DZ_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/bitops.h>
+#include <linux/compiler.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/major.h>
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/sysrq.h>
+#include <linux/tty.h>
+
+#include <asm/atomic.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+#include <asm/dec/interrupts.h>
+#include <asm/dec/kn01.h>
+#include <asm/dec/kn02.h>
+#include <asm/dec/machtype.h>
+#include <asm/dec/prom.h>
+#include <asm/dec/system.h>
+
+#include "dz.h"
+
+
+MODULE_DESCRIPTION("DECstation DZ serial driver");
+MODULE_LICENSE("GPL");
+
+
+static char dz_name[] __initdata = "DECstation DZ serial driver version ";
+static char dz_version[] __initdata = "1.04";
+
+struct dz_port {
+	struct dz_mux		*mux;
+	struct uart_port	port;
+	unsigned int		cflag;
+};
+
+struct dz_mux {
+	struct dz_port		dport[DZ_NB_PORT];
+	atomic_t		map_guard;
+	atomic_t		irq_guard;
+	int			initialised;
+};
+
+static struct dz_mux dz_mux;
+
+static inline struct dz_port *to_dport(struct uart_port *uport)
+{
+	return container_of(uport, struct dz_port, port);
+}
+
+/*
+ * ------------------------------------------------------------
+ * dz_in () and dz_out ()
+ *
+ * These routines are used to access the registers of the DZ
+ * chip, hiding relocation differences between implementation.
+ * ------------------------------------------------------------
+ */
+
+static u16 dz_in(struct dz_port *dport, unsigned offset)
+{
+	void __iomem *addr = dport->port.membase + offset;
+
+	return readw(addr);
+}
+
+static void dz_out(struct dz_port *dport, unsigned offset, u16 value)
+{
+	void __iomem *addr = dport->port.membase + offset;
+
+	writew(value, addr);
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_stop () and rs_start ()
+ *
+ * These routines are called before setting or resetting
+ * tty->stopped. They enable or disable transmitter interrupts,
+ * as necessary.
+ * ------------------------------------------------------------
+ */
+
+static void dz_stop_tx(struct uart_port *uport)
+{
+	struct dz_port *dport = to_dport(uport);
+	u16 tmp, mask = 1 << dport->port.line;
+
+	tmp = dz_in(dport, DZ_TCR);	/* read the TX flag */
+	tmp &= ~mask;			/* clear the TX flag */
+	dz_out(dport, DZ_TCR, tmp);
+}
+
+static void dz_start_tx(struct uart_port *uport)
+{
+	struct dz_port *dport = to_dport(uport);
+	u16 tmp, mask = 1 << dport->port.line;
+
+	tmp = dz_in(dport, DZ_TCR);	/* read the TX flag */
+	tmp |= mask;			/* set the TX flag */
+	dz_out(dport, DZ_TCR, tmp);
+}
+
+static void dz_stop_rx(struct uart_port *uport)
+{
+	struct dz_port *dport = to_dport(uport);
+
+	dport->cflag &= ~DZ_RXENAB;
+	dz_out(dport, DZ_LPR, dport->cflag);
+}
+
+static void dz_enable_ms(struct uart_port *uport)
+{
+	/* nothing to do */
+}
+
+/*
+ * ------------------------------------------------------------
+ *
+ * Here start the interrupt handling routines.  All of the following
+ * subroutines are declared as inline and are folded into
+ * dz_interrupt.  They were separated out for readability's sake.
+ *
+ * Note: dz_interrupt() is a "fast" interrupt, which means that it
+ * runs with interrupts turned off.  People who may want to modify
+ * dz_interrupt() should try to keep the interrupt handler as fast as
+ * possible.  After you are done making modifications, it is not a bad
+ * idea to do:
+ *
+ *	make drivers/serial/dz.s
+ *
+ * and look at the resulting assemble code in dz.s.
+ *
+ * ------------------------------------------------------------
+ */
+
+/*
+ * ------------------------------------------------------------
+ * receive_char ()
+ *
+ * This routine deals with inputs from any lines.
+ * ------------------------------------------------------------
+ */
+static inline void dz_receive_chars(struct dz_mux *mux)
+{
+	struct uart_port *uport;
+	struct dz_port *dport = &mux->dport[0];
+	struct tty_struct *tty = NULL;
+	struct uart_icount *icount;
+	int lines_rx[DZ_NB_PORT] = { [0 ... DZ_NB_PORT - 1] = 0 };
+	unsigned char ch, flag;
+	u16 status;
+	int i;
+
+	while ((status = dz_in(dport, DZ_RBUF)) & DZ_DVAL) {
+		dport = &mux->dport[LINE(status)];
+		uport = &dport->port;
+		tty = uport->state->port.tty;	/* point to the proper dev */
+
+		ch = UCHAR(status);		/* grab the char */
+		flag = TTY_NORMAL;
+
+		icount = &uport->icount;
+		icount->rx++;
+
+		if (unlikely(status & (DZ_OERR | DZ_FERR | DZ_PERR))) {
+
+			/*
+			 * There is no separate BREAK status bit, so treat
+			 * null characters with framing errors as BREAKs;
+			 * normally, otherwise.  For this move the Framing
+			 * Error bit to a simulated BREAK bit.
+			 */
+			if (!ch) {
+				status |= (status & DZ_FERR) >>
+					  (ffs(DZ_FERR) - ffs(DZ_BREAK));
+				status &= ~DZ_FERR;
+			}
+
+			/* Handle SysRq/SAK & keep track of the statistics. */
+			if (status & DZ_BREAK) {
+				icount->brk++;
+				if (uart_handle_break(uport))
+					continue;
+			} else if (status & DZ_FERR)
+				icount->frame++;
+			else if (status & DZ_PERR)
+				icount->parity++;
+			if (status & DZ_OERR)
+				icount->overrun++;
+
+			status &= uport->read_status_mask;
+			if (status & DZ_BREAK)
+				flag = TTY_BREAK;
+			else if (status & DZ_FERR)
+				flag = TTY_FRAME;
+			else if (status & DZ_PERR)
+				flag = TTY_PARITY;
+
+		}
+
+		if (uart_handle_sysrq_char(uport, ch))
+			continue;
+
+		uart_insert_char(uport, status, DZ_OERR, ch, flag);
+		lines_rx[LINE(status)] = 1;
+	}
+	for (i = 0; i < DZ_NB_PORT; i++)
+		if (lines_rx[i])
+			tty_flip_buffer_push(mux->dport[i].port.state->port.tty);
+}
+
+/*
+ * ------------------------------------------------------------
+ * transmit_char ()
+ *
+ * This routine deals with outputs to any lines.
+ * ------------------------------------------------------------
+ */
+static inline void dz_transmit_chars(struct dz_mux *mux)
+{
+	struct dz_port *dport = &mux->dport[0];
+	struct circ_buf *xmit;
+	unsigned char tmp;
+	u16 status;
+
+	status = dz_in(dport, DZ_CSR);
+	dport = &mux->dport[LINE(status)];
+	xmit = &dport->port.state->xmit;
+
+	if (dport->port.x_char) {		/* XON/XOFF chars */
+		dz_out(dport, DZ_TDR, dport->port.x_char);
+		dport->port.icount.tx++;
+		dport->port.x_char = 0;
+		return;
+	}
+	/* If nothing to do or stopped or hardware stopped. */
+	if (uart_circ_empty(xmit) || uart_tx_stopped(&dport->port)) {
+		spin_lock(&dport->port.lock);
+		dz_stop_tx(&dport->port);
+		spin_unlock(&dport->port.lock);
+		return;
+	}
+
+	/*
+	 * If something to do... (remember the dz has no output fifo,
+	 * so we go one char at a time) :-<
+	 */
+	tmp = xmit->buf[xmit->tail];
+	xmit->tail = (xmit->tail + 1) & (DZ_XMIT_SIZE - 1);
+	dz_out(dport, DZ_TDR, tmp);
+	dport->port.icount.tx++;
+
+	if (uart_circ_chars_pending(xmit) < DZ_WAKEUP_CHARS)
+		uart_write_wakeup(&dport->port);
+
+	/* Are we are done. */
+	if (uart_circ_empty(xmit)) {
+		spin_lock(&dport->port.lock);
+		dz_stop_tx(&dport->port);
+		spin_unlock(&dport->port.lock);
+	}
+}
+
+/*
+ * ------------------------------------------------------------
+ * check_modem_status()
+ *
+ * DS 3100 & 5100: Only valid for the MODEM line, duh!
+ * DS 5000/200: Valid for the MODEM and PRINTER line.
+ * ------------------------------------------------------------
+ */
+static inline void check_modem_status(struct dz_port *dport)
+{
+	/*
+	 * FIXME:
+	 * 1. No status change interrupt; use a timer.
+	 * 2. Handle the 3100/5000 as appropriate. --macro
+	 */
+	u16 status;
+
+	/* If not the modem line just return.  */
+	if (dport->port.line != DZ_MODEM)
+		return;
+
+	status = dz_in(dport, DZ_MSR);
+
+	/* it's easy, since DSR2 is the only bit in the register */
+	if (status)
+		dport->port.icount.dsr++;
+}
+
+/*
+ * ------------------------------------------------------------
+ * dz_interrupt ()
+ *
+ * this is the main interrupt routine for the DZ chip.
+ * It deals with the multiple ports.
+ * ------------------------------------------------------------
+ */
+static irqreturn_t dz_interrupt(int irq, void *dev_id)
+{
+	struct dz_mux *mux = dev_id;
+	struct dz_port *dport = &mux->dport[0];
+	u16 status;
+
+	/* get the reason why we just got an irq */
+	status = dz_in(dport, DZ_CSR);
+
+	if ((status & (DZ_RDONE | DZ_RIE)) == (DZ_RDONE | DZ_RIE))
+		dz_receive_chars(mux);
+
+	if ((status & (DZ_TRDY | DZ_TIE)) == (DZ_TRDY | DZ_TIE))
+		dz_transmit_chars(mux);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * -------------------------------------------------------------------
+ * Here ends the DZ interrupt routines.
+ * -------------------------------------------------------------------
+ */
+
+static unsigned int dz_get_mctrl(struct uart_port *uport)
+{
+	/*
+	 * FIXME: Handle the 3100/5000 as appropriate. --macro
+	 */
+	struct dz_port *dport = to_dport(uport);
+	unsigned int mctrl = TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+
+	if (dport->port.line == DZ_MODEM) {
+		if (dz_in(dport, DZ_MSR) & DZ_MODEM_DSR)
+			mctrl &= ~TIOCM_DSR;
+	}
+
+	return mctrl;
+}
+
+static void dz_set_mctrl(struct uart_port *uport, unsigned int mctrl)
+{
+	/*
+	 * FIXME: Handle the 3100/5000 as appropriate. --macro
+	 */
+	struct dz_port *dport = to_dport(uport);
+	u16 tmp;
+
+	if (dport->port.line == DZ_MODEM) {
+		tmp = dz_in(dport, DZ_TCR);
+		if (mctrl & TIOCM_DTR)
+			tmp &= ~DZ_MODEM_DTR;
+		else
+			tmp |= DZ_MODEM_DTR;
+		dz_out(dport, DZ_TCR, tmp);
+	}
+}
+
+/*
+ * -------------------------------------------------------------------
+ * startup ()
+ *
+ * various initialization tasks
+ * -------------------------------------------------------------------
+ */
+static int dz_startup(struct uart_port *uport)
+{
+	struct dz_port *dport = to_dport(uport);
+	struct dz_mux *mux = dport->mux;
+	unsigned long flags;
+	int irq_guard;
+	int ret;
+	u16 tmp;
+
+	irq_guard = atomic_add_return(1, &mux->irq_guard);
+	if (irq_guard != 1)
+		return 0;
+
+	ret = request_irq(dport->port.irq, dz_interrupt,
+			  IRQF_SHARED, "dz", mux);
+	if (ret) {
+		atomic_add(-1, &mux->irq_guard);
+		printk(KERN_ERR "dz: Cannot get IRQ %d!\n", dport->port.irq);
+		return ret;
+	}
+
+	spin_lock_irqsave(&dport->port.lock, flags);
+
+	/* Enable interrupts.  */
+	tmp = dz_in(dport, DZ_CSR);
+	tmp |= DZ_RIE | DZ_TIE;
+	dz_out(dport, DZ_CSR, tmp);
+
+	spin_unlock_irqrestore(&dport->port.lock, flags);
+
+	return 0;
+}
+
+/*
+ * -------------------------------------------------------------------
+ * shutdown ()
+ *
+ * This routine will shutdown a serial port; interrupts are disabled, and
+ * DTR is dropped if the hangup on close termio flag is on.
+ * -------------------------------------------------------------------
+ */
+static void dz_shutdown(struct uart_port *uport)
+{
+	struct dz_port *dport = to_dport(uport);
+	struct dz_mux *mux = dport->mux;
+	unsigned long flags;
+	int irq_guard;
+	u16 tmp;
+
+	spin_lock_irqsave(&dport->port.lock, flags);
+	dz_stop_tx(&dport->port);
+	spin_unlock_irqrestore(&dport->port.lock, flags);
+
+	irq_guard = atomic_add_return(-1, &mux->irq_guard);
+	if (!irq_guard) {
+		/* Disable interrupts.  */
+		tmp = dz_in(dport, DZ_CSR);
+		tmp &= ~(DZ_RIE | DZ_TIE);
+		dz_out(dport, DZ_CSR, tmp);
+
+		free_irq(dport->port.irq, mux);
+	}
+}
+
+/*
+ * -------------------------------------------------------------------
+ * dz_tx_empty() -- get the transmitter empty status
+ *
+ * Purpose: Let user call ioctl() to get info when the UART physically
+ *          is emptied.  On bus types like RS485, the transmitter must
+ *          release the bus after transmitting. This must be done when
+ *          the transmit shift register is empty, not be done when the
+ *          transmit holding register is empty.  This functionality
+ *          allows an RS485 driver to be written in user space.
+ * -------------------------------------------------------------------
+ */
+static unsigned int dz_tx_empty(struct uart_port *uport)
+{
+	struct dz_port *dport = to_dport(uport);
+	unsigned short tmp, mask = 1 << dport->port.line;
+
+	tmp = dz_in(dport, DZ_TCR);
+	tmp &= mask;
+
+	return tmp ? 0 : TIOCSER_TEMT;
+}
+
+static void dz_break_ctl(struct uart_port *uport, int break_state)
+{
+	/*
+	 * FIXME: Can't access BREAK bits in TDR easily;
+	 * reuse the code for polled TX. --macro
+	 */
+	struct dz_port *dport = to_dport(uport);
+	unsigned long flags;
+	unsigned short tmp, mask = 1 << dport->port.line;
+
+	spin_lock_irqsave(&uport->lock, flags);
+	tmp = dz_in(dport, DZ_TCR);
+	if (break_state)
+		tmp |= mask;
+	else
+		tmp &= ~mask;
+	dz_out(dport, DZ_TCR, tmp);
+	spin_unlock_irqrestore(&uport->lock, flags);
+}
+
+static int dz_encode_baud_rate(unsigned int baud)
+{
+	switch (baud) {
+	case 50:
+		return DZ_B50;
+	case 75:
+		return DZ_B75;
+	case 110:
+		return DZ_B110;
+	case 134:
+		return DZ_B134;
+	case 150:
+		return DZ_B150;
+	case 300:
+		return DZ_B300;
+	case 600:
+		return DZ_B600;
+	case 1200:
+		return DZ_B1200;
+	case 1800:
+		return DZ_B1800;
+	case 2000:
+		return DZ_B2000;
+	case 2400:
+		return DZ_B2400;
+	case 3600:
+		return DZ_B3600;
+	case 4800:
+		return DZ_B4800;
+	case 7200:
+		return DZ_B7200;
+	case 9600:
+		return DZ_B9600;
+	default:
+		return -1;
+	}
+}
+
+
+static void dz_reset(struct dz_port *dport)
+{
+	struct dz_mux *mux = dport->mux;
+
+	if (mux->initialised)
+		return;
+
+	dz_out(dport, DZ_CSR, DZ_CLR);
+	while (dz_in(dport, DZ_CSR) & DZ_CLR);
+	iob();
+
+	/* Enable scanning.  */
+	dz_out(dport, DZ_CSR, DZ_MSE);
+
+	mux->initialised = 1;
+}
+
+static void dz_set_termios(struct uart_port *uport, struct ktermios *termios,
+			   struct ktermios *old_termios)
+{
+	struct dz_port *dport = to_dport(uport);
+	unsigned long flags;
+	unsigned int cflag, baud;
+	int bflag;
+
+	cflag = dport->port.line;
+
+	switch (termios->c_cflag & CSIZE) {
+	case CS5:
+		cflag |= DZ_CS5;
+		break;
+	case CS6:
+		cflag |= DZ_CS6;
+		break;
+	case CS7:
+		cflag |= DZ_CS7;
+		break;
+	case CS8:
+	default:
+		cflag |= DZ_CS8;
+	}
+
+	if (termios->c_cflag & CSTOPB)
+		cflag |= DZ_CSTOPB;
+	if (termios->c_cflag & PARENB)
+		cflag |= DZ_PARENB;
+	if (termios->c_cflag & PARODD)
+		cflag |= DZ_PARODD;
+
+	baud = uart_get_baud_rate(uport, termios, old_termios, 50, 9600);
+	bflag = dz_encode_baud_rate(baud);
+	if (bflag < 0)	{			/* Try to keep unchanged.  */
+		baud = uart_get_baud_rate(uport, old_termios, NULL, 50, 9600);
+		bflag = dz_encode_baud_rate(baud);
+		if (bflag < 0)	{		/* Resort to 9600.  */
+			baud = 9600;
+			bflag = DZ_B9600;
+		}
+		tty_termios_encode_baud_rate(termios, baud, baud);
+	}
+	cflag |= bflag;
+
+	if (termios->c_cflag & CREAD)
+		cflag |= DZ_RXENAB;
+
+	spin_lock_irqsave(&dport->port.lock, flags);
+
+	uart_update_timeout(uport, termios->c_cflag, baud);
+
+	dz_out(dport, DZ_LPR, cflag);
+	dport->cflag = cflag;
+
+	/* setup accept flag */
+	dport->port.read_status_mask = DZ_OERR;
+	if (termios->c_iflag & INPCK)
+		dport->port.read_status_mask |= DZ_FERR | DZ_PERR;
+	if (termios->c_iflag & (BRKINT | PARMRK))
+		dport->port.read_status_mask |= DZ_BREAK;
+
+	/* characters to ignore */
+	uport->ignore_status_mask = 0;
+	if ((termios->c_iflag & (IGNPAR | IGNBRK)) == (IGNPAR | IGNBRK))
+		dport->port.ignore_status_mask |= DZ_OERR;
+	if (termios->c_iflag & IGNPAR)
+		dport->port.ignore_status_mask |= DZ_FERR | DZ_PERR;
+	if (termios->c_iflag & IGNBRK)
+		dport->port.ignore_status_mask |= DZ_BREAK;
+
+	spin_unlock_irqrestore(&dport->port.lock, flags);
+}
+
+/*
+ * Hack alert!
+ * Required solely so that the initial PROM-based console
+ * works undisturbed in parallel with this one.
+ */
+static void dz_pm(struct uart_port *uport, unsigned int state,
+		  unsigned int oldstate)
+{
+	struct dz_port *dport = to_dport(uport);
+	unsigned long flags;
+
+	spin_lock_irqsave(&dport->port.lock, flags);
+	if (state < 3)
+		dz_start_tx(&dport->port);
+	else
+		dz_stop_tx(&dport->port);
+	spin_unlock_irqrestore(&dport->port.lock, flags);
+}
+
+
+static const char *dz_type(struct uart_port *uport)
+{
+	return "DZ";
+}
+
+static void dz_release_port(struct uart_port *uport)
+{
+	struct dz_mux *mux = to_dport(uport)->mux;
+	int map_guard;
+
+	iounmap(uport->membase);
+	uport->membase = NULL;
+
+	map_guard = atomic_add_return(-1, &mux->map_guard);
+	if (!map_guard)
+		release_mem_region(uport->mapbase, dec_kn_slot_size);
+}
+
+static int dz_map_port(struct uart_port *uport)
+{
+	if (!uport->membase)
+		uport->membase = ioremap_nocache(uport->mapbase,
+						 dec_kn_slot_size);
+	if (!uport->membase) {
+		printk(KERN_ERR "dz: Cannot map MMIO\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static int dz_request_port(struct uart_port *uport)
+{
+	struct dz_mux *mux = to_dport(uport)->mux;
+	int map_guard;
+	int ret;
+
+	map_guard = atomic_add_return(1, &mux->map_guard);
+	if (map_guard == 1) {
+		if (!request_mem_region(uport->mapbase, dec_kn_slot_size,
+					"dz")) {
+			atomic_add(-1, &mux->map_guard);
+			printk(KERN_ERR
+			       "dz: Unable to reserve MMIO resource\n");
+			return -EBUSY;
+		}
+	}
+	ret = dz_map_port(uport);
+	if (ret) {
+		map_guard = atomic_add_return(-1, &mux->map_guard);
+		if (!map_guard)
+			release_mem_region(uport->mapbase, dec_kn_slot_size);
+		return ret;
+	}
+	return 0;
+}
+
+static void dz_config_port(struct uart_port *uport, int flags)
+{
+	struct dz_port *dport = to_dport(uport);
+
+	if (flags & UART_CONFIG_TYPE) {
+		if (dz_request_port(uport))
+			return;
+
+		uport->type = PORT_DZ;
+
+		dz_reset(dport);
+	}
+}
+
+/*
+ * Verify the new serial_struct (for TIOCSSERIAL).
+ */
+static int dz_verify_port(struct uart_port *uport, struct serial_struct *ser)
+{
+	int ret = 0;
+
+	if (ser->type != PORT_UNKNOWN && ser->type != PORT_DZ)
+		ret = -EINVAL;
+	if (ser->irq != uport->irq)
+		ret = -EINVAL;
+	return ret;
+}
+
+static struct uart_ops dz_ops = {
+	.tx_empty	= dz_tx_empty,
+	.get_mctrl	= dz_get_mctrl,
+	.set_mctrl	= dz_set_mctrl,
+	.stop_tx	= dz_stop_tx,
+	.start_tx	= dz_start_tx,
+	.stop_rx	= dz_stop_rx,
+	.enable_ms	= dz_enable_ms,
+	.break_ctl	= dz_break_ctl,
+	.startup	= dz_startup,
+	.shutdown	= dz_shutdown,
+	.set_termios	= dz_set_termios,
+	.pm		= dz_pm,
+	.type		= dz_type,
+	.release_port	= dz_release_port,
+	.request_port	= dz_request_port,
+	.config_port	= dz_config_port,
+	.verify_port	= dz_verify_port,
+};
+
+static void __init dz_init_ports(void)
+{
+	static int first = 1;
+	unsigned long base;
+	int line;
+
+	if (!first)
+		return;
+	first = 0;
+
+	if (mips_machtype == MACH_DS23100 || mips_machtype == MACH_DS5100)
+		base = dec_kn_slot_base + KN01_DZ11;
+	else
+		base = dec_kn_slot_base + KN02_DZ11;
+
+	for (line = 0; line < DZ_NB_PORT; line++) {
+		struct dz_port *dport = &dz_mux.dport[line];
+		struct uart_port *uport = &dport->port;
+
+		dport->mux	= &dz_mux;
+
+		uport->irq	= dec_interrupt[DEC_IRQ_DZ11];
+		uport->fifosize	= 1;
+		uport->iotype	= UPIO_MEM;
+		uport->flags	= UPF_BOOT_AUTOCONF;
+		uport->ops	= &dz_ops;
+		uport->line	= line;
+		uport->mapbase	= base;
+	}
+}
+
+#ifdef CONFIG_SERIAL_DZ_CONSOLE
+/*
+ * -------------------------------------------------------------------
+ * dz_console_putchar() -- transmit a character
+ *
+ * Polled transmission.  This is tricky.  We need to mask transmit
+ * interrupts so that they do not interfere, enable the transmitter
+ * for the line requested and then wait till the transmit scanner
+ * requests data for this line.  But it may request data for another
+ * line first, in which case we have to disable its transmitter and
+ * repeat waiting till our line pops up.  Only then the character may
+ * be transmitted.  Finally, the state of the transmitter mask is
+ * restored.  Welcome to the world of PDP-11!
+ * -------------------------------------------------------------------
+ */
+static void dz_console_putchar(struct uart_port *uport, int ch)
+{
+	struct dz_port *dport = to_dport(uport);
+	unsigned long flags;
+	unsigned short csr, tcr, trdy, mask;
+	int loops = 10000;
+
+	spin_lock_irqsave(&dport->port.lock, flags);
+	csr = dz_in(dport, DZ_CSR);
+	dz_out(dport, DZ_CSR, csr & ~DZ_TIE);
+	tcr = dz_in(dport, DZ_TCR);
+	tcr |= 1 << dport->port.line;
+	mask = tcr;
+	dz_out(dport, DZ_TCR, mask);
+	iob();
+	spin_unlock_irqrestore(&dport->port.lock, flags);
+
+	do {
+		trdy = dz_in(dport, DZ_CSR);
+		if (!(trdy & DZ_TRDY))
+			continue;
+		trdy = (trdy & DZ_TLINE) >> 8;
+		if (trdy == dport->port.line)
+			break;
+		mask &= ~(1 << trdy);
+		dz_out(dport, DZ_TCR, mask);
+		iob();
+		udelay(2);
+	} while (--loops);
+
+	if (loops)				/* Cannot send otherwise. */
+		dz_out(dport, DZ_TDR, ch);
+
+	dz_out(dport, DZ_TCR, tcr);
+	dz_out(dport, DZ_CSR, csr);
+}
+
+/*
+ * -------------------------------------------------------------------
+ * dz_console_print ()
+ *
+ * dz_console_print is registered for printk.
+ * The console must be locked when we get here.
+ * -------------------------------------------------------------------
+ */
+static void dz_console_print(struct console *co,
+			     const char *str,
+			     unsigned int count)
+{
+	struct dz_port *dport = &dz_mux.dport[co->index];
+#ifdef DEBUG_DZ
+	prom_printf((char *) str);
+#endif
+	uart_console_write(&dport->port, str, count, dz_console_putchar);
+}
+
+static int __init dz_console_setup(struct console *co, char *options)
+{
+	struct dz_port *dport = &dz_mux.dport[co->index];
+	struct uart_port *uport = &dport->port;
+	int baud = 9600;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+	int ret;
+
+	ret = dz_map_port(uport);
+	if (ret)
+		return ret;
+
+	spin_lock_init(&dport->port.lock);	/* For dz_pm().  */
+
+	dz_reset(dport);
+	dz_pm(uport, 0, -1);
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+	return uart_set_options(&dport->port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver dz_reg;
+static struct console dz_console = {
+	.name	= "ttyS",
+	.write	= dz_console_print,
+	.device	= uart_console_device,
+	.setup	= dz_console_setup,
+	.flags	= CON_PRINTBUFFER,
+	.index	= -1,
+	.data	= &dz_reg,
+};
+
+static int __init dz_serial_console_init(void)
+{
+	if (!IOASIC) {
+		dz_init_ports();
+		register_console(&dz_console);
+		return 0;
+	} else
+		return -ENXIO;
+}
+
+console_initcall(dz_serial_console_init);
+
+#define SERIAL_DZ_CONSOLE	&dz_console
+#else
+#define SERIAL_DZ_CONSOLE	NULL
+#endif /* CONFIG_SERIAL_DZ_CONSOLE */
+
+static struct uart_driver dz_reg = {
+	.owner			= THIS_MODULE,
+	.driver_name		= "serial",
+	.dev_name		= "ttyS",
+	.major			= TTY_MAJOR,
+	.minor			= 64,
+	.nr			= DZ_NB_PORT,
+	.cons			= SERIAL_DZ_CONSOLE,
+};
+
+static int __init dz_init(void)
+{
+	int ret, i;
+
+	if (IOASIC)
+		return -ENXIO;
+
+	printk("%s%s\n", dz_name, dz_version);
+
+	dz_init_ports();
+
+	ret = uart_register_driver(&dz_reg);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < DZ_NB_PORT; i++)
+		uart_add_one_port(&dz_reg, &dz_mux.dport[i].port);
+
+	return 0;
+}
+
+module_init(dz_init);