summaryrefslogtreecommitdiffstats
path: root/drivers/thunderbolt
diff options
context:
space:
mode:
authorGil Fine <gil.fine@intel.com>2021-12-17 03:16:43 +0200
committerMika Westerberg <mika.westerberg@linux.intel.com>2021-12-28 10:43:56 +0300
commit43f977bc60b1cfd3c1d220a9a0a06493fbf3985d (patch)
treee1dd6423c1c4b1e0defc5454a90f09f041a2b105 /drivers/thunderbolt
parent483c9d8275aff428df433e9d7c718609345500e2 (diff)
downloadlinux-43f977bc60b1cfd3c1d220a9a0a06493fbf3985d.tar.bz2
thunderbolt: Enable CL0s for Intel Titan Ridge
Low power link states (called collectively CLx) are used to reduce transmitter and receiver power when a high-speed lane is idle. The simplest one being called CL0s. Follow what we already do for USB4 device routers and enable CL0s for Intel Titan Ridge device router too. This allows better thermal management. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Diffstat (limited to 'drivers/thunderbolt')
-rw-r--r--drivers/thunderbolt/lc.c24
-rw-r--r--drivers/thunderbolt/switch.c160
-rw-r--r--drivers/thunderbolt/tb.c7
-rw-r--r--drivers/thunderbolt/tb.h16
-rw-r--r--drivers/thunderbolt/tb_regs.h102
-rw-r--r--drivers/thunderbolt/tmu.c53
6 files changed, 324 insertions, 38 deletions
diff --git a/drivers/thunderbolt/lc.c b/drivers/thunderbolt/lc.c
index c178f0d7beab..53495a38b4eb 100644
--- a/drivers/thunderbolt/lc.c
+++ b/drivers/thunderbolt/lc.c
@@ -193,6 +193,30 @@ int tb_lc_start_lane_initialization(struct tb_port *port)
return tb_sw_write(sw, &ctrl, TB_CFG_SWITCH, cap + TB_LC_SX_CTRL, 1);
}
+/**
+ * tb_lc_is_clx_supported() - Check whether CLx is supported by the lane adapter
+ * @port: Lane adapter
+ *
+ * TB_LC_LINK_ATTR_CPS bit reflects if the link supports CLx including
+ * active cables (if connected on the link).
+ */
+bool tb_lc_is_clx_supported(struct tb_port *port)
+{
+ struct tb_switch *sw = port->sw;
+ int cap, ret;
+ u32 val;
+
+ cap = find_port_lc_cap(port);
+ if (cap < 0)
+ return false;
+
+ ret = tb_sw_read(sw, &val, TB_CFG_SWITCH, cap + TB_LC_LINK_ATTR, 1);
+ if (ret)
+ return false;
+
+ return !!(val & TB_LC_LINK_ATTR_CPS);
+}
+
static int tb_lc_set_wake_one(struct tb_switch *sw, unsigned int offset,
unsigned int flags)
{
diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
index c79074f83442..e7dc54d3ea99 100644
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -2236,6 +2236,10 @@ struct tb_switch *tb_switch_alloc(struct tb *tb, struct device *parent,
if (ret > 0)
sw->cap_lc = ret;
+ ret = tb_switch_find_vse_cap(sw, TB_VSE_CAP_CP_LP);
+ if (ret > 0)
+ sw->cap_lp = ret;
+
/* Root switch is always authorized */
if (!route)
sw->authorized = true;
@@ -3042,6 +3046,13 @@ void tb_switch_suspend(struct tb_switch *sw, bool runtime)
tb_sw_dbg(sw, "suspending switch\n");
+ /*
+ * Actually only needed for Titan Ridge but for simplicity can be
+ * done for USB4 device too as CLx is re-enabled at resume.
+ */
+ if (tb_switch_disable_clx(sw, TB_CL0S))
+ tb_sw_warn(sw, "failed to disable CLx on upstream port\n");
+
err = tb_plug_events_active(sw, false);
if (err)
return;
@@ -3309,6 +3320,7 @@ static int tb_switch_pm_secondary_resolve(struct tb_switch *sw)
return tb_port_pm_secondary_disable(down);
}
+/* Called for USB4 or Titan Ridge routers only */
static bool tb_port_clx_supported(struct tb_port *port, enum tb_clx clx)
{
u32 mask, val;
@@ -3322,8 +3334,12 @@ static bool tb_port_clx_supported(struct tb_port *port, enum tb_clx clx)
if (port->xdomain)
return false;
- if (!usb4_port_clx_supported(port))
+ if (tb_switch_is_usb4(port->sw)) {
+ if (!usb4_port_clx_supported(port))
+ return false;
+ } else if (!tb_lc_is_clx_supported(port)) {
return false;
+ }
switch (clx) {
case TB_CL0S:
@@ -3389,7 +3405,7 @@ static int tb_switch_enable_cl0s(struct tb_switch *sw)
struct tb_port *up, *down;
int ret;
- if (!tb_switch_is_usb4(sw))
+ if (!tb_switch_is_clx_supported(sw))
return 0;
/*
@@ -3431,6 +3447,13 @@ static int tb_switch_enable_cl0s(struct tb_switch *sw)
return ret;
}
+ ret = tb_switch_mask_clx_objections(sw);
+ if (ret) {
+ tb_port_cl0s_disable(up);
+ tb_port_cl0s_disable(down);
+ return ret;
+ }
+
sw->clx = TB_CL0S;
tb_port_dbg(up, "CL0s enabled\n");
@@ -3477,7 +3500,7 @@ static int tb_switch_disable_cl0s(struct tb_switch *sw)
struct tb_port *up, *down;
int ret;
- if (!tb_switch_is_usb4(sw))
+ if (!tb_switch_is_clx_supported(sw))
return 0;
/*
@@ -3524,3 +3547,134 @@ int tb_switch_disable_clx(struct tb_switch *sw, enum tb_clx clx)
return -EOPNOTSUPP;
}
}
+
+/**
+ * tb_switch_mask_clx_objections() - Mask CLx objections for a router
+ * @sw: Router to mask objections for
+ *
+ * Mask the objections coming from the second depth routers in order to
+ * stop these objections from interfering with the CLx states of the first
+ * depth link.
+ */
+int tb_switch_mask_clx_objections(struct tb_switch *sw)
+{
+ int up_port = sw->config.upstream_port_number;
+ u32 offset, val[2], mask_obj, unmask_obj;
+ int ret, i;
+
+ /* Only Titan Ridge of pre-USB4 devices support CLx states */
+ if (!tb_switch_is_titan_ridge(sw))
+ return 0;
+
+ if (!tb_route(sw))
+ return 0;
+
+ /*
+ * In Titan Ridge there are only 2 dual-lane Thunderbolt ports:
+ * Port A consists of lane adapters 1,2 and
+ * Port B consists of lane adapters 3,4
+ * If upstream port is A, (lanes are 1,2), we mask objections from
+ * port B (lanes 3,4) and unmask objections from Port A and vice-versa.
+ */
+ if (up_port == 1) {
+ mask_obj = TB_LOW_PWR_C0_PORT_B_MASK;
+ unmask_obj = TB_LOW_PWR_C1_PORT_A_MASK;
+ offset = TB_LOW_PWR_C1_CL1;
+ } else {
+ mask_obj = TB_LOW_PWR_C1_PORT_A_MASK;
+ unmask_obj = TB_LOW_PWR_C0_PORT_B_MASK;
+ offset = TB_LOW_PWR_C3_CL1;
+ }
+
+ ret = tb_sw_read(sw, &val, TB_CFG_SWITCH,
+ sw->cap_lp + offset, ARRAY_SIZE(val));
+ if (ret)
+ return ret;
+
+ for (i = 0; i < ARRAY_SIZE(val); i++) {
+ val[i] |= mask_obj;
+ val[i] &= ~unmask_obj;
+ }
+
+ return tb_sw_write(sw, &val, TB_CFG_SWITCH,
+ sw->cap_lp + offset, ARRAY_SIZE(val));
+}
+
+/*
+ * Can be used for read/write a specified PCIe bridge for any Thunderbolt 3
+ * device. For now used only for Titan Ridge.
+ */
+static int tb_switch_pcie_bridge_write(struct tb_switch *sw, unsigned int bridge,
+ unsigned int pcie_offset, u32 value)
+{
+ u32 offset, command, val;
+ int ret;
+
+ if (sw->generation != 3)
+ return -EOPNOTSUPP;
+
+ offset = sw->cap_plug_events + TB_PLUG_EVENTS_PCIE_WR_DATA;
+ ret = tb_sw_write(sw, &value, TB_CFG_SWITCH, offset, 1);
+ if (ret)
+ return ret;
+
+ command = pcie_offset & TB_PLUG_EVENTS_PCIE_CMD_DW_OFFSET_MASK;
+ command |= BIT(bridge + TB_PLUG_EVENTS_PCIE_CMD_BR_SHIFT);
+ command |= TB_PLUG_EVENTS_PCIE_CMD_RD_WR_MASK;
+ command |= TB_PLUG_EVENTS_PCIE_CMD_COMMAND_VAL
+ << TB_PLUG_EVENTS_PCIE_CMD_COMMAND_SHIFT;
+ command |= TB_PLUG_EVENTS_PCIE_CMD_REQ_ACK_MASK;
+
+ offset = sw->cap_plug_events + TB_PLUG_EVENTS_PCIE_CMD;
+
+ ret = tb_sw_write(sw, &command, TB_CFG_SWITCH, offset, 1);
+ if (ret)
+ return ret;
+
+ ret = tb_switch_wait_for_bit(sw, offset,
+ TB_PLUG_EVENTS_PCIE_CMD_REQ_ACK_MASK, 0, 100);
+ if (ret)
+ return ret;
+
+ ret = tb_sw_read(sw, &val, TB_CFG_SWITCH, offset, 1);
+ if (ret)
+ return ret;
+
+ if (val & TB_PLUG_EVENTS_PCIE_CMD_TIMEOUT_MASK)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+/**
+ * tb_switch_pcie_l1_enable() - Enable PCIe link to enter L1 state
+ * @sw: Router to enable PCIe L1
+ *
+ * For Titan Ridge switch to enter CLx state, its PCIe bridges shall enable
+ * entry to PCIe L1 state. Shall be called after the upstream PCIe tunnel
+ * was configured. Due to Intel platforms limitation, shall be called only
+ * for first hop switch.
+ */
+int tb_switch_pcie_l1_enable(struct tb_switch *sw)
+{
+ struct tb_switch *parent = tb_switch_parent(sw);
+ int ret;
+
+ if (!tb_route(sw))
+ return 0;
+
+ if (!tb_switch_is_titan_ridge(sw))
+ return 0;
+
+ /* Enable PCIe L1 enable only for first hop router (depth = 1) */
+ if (tb_route(parent))
+ return 0;
+
+ /* Write to downstream PCIe bridge #5 aka Dn4 */
+ ret = tb_switch_pcie_bridge_write(sw, 5, 0x143, 0x0c7806b1);
+ if (ret)
+ return ret;
+
+ /* Write to Upstream PCIe bridge #0 aka Up0 */
+ return tb_switch_pcie_bridge_write(sw, 0, 0x143, 0x0c5806b1);
+}
diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c
index 1454dc5b6b91..cbd0ad85ffb1 100644
--- a/drivers/thunderbolt/tb.c
+++ b/drivers/thunderbolt/tb.c
@@ -1092,6 +1092,13 @@ static int tb_tunnel_pci(struct tb *tb, struct tb_switch *sw)
return -EIO;
}
+ /*
+ * PCIe L1 is needed to enable CL0s for Titan Ridge so enable it
+ * here.
+ */
+ if (tb_switch_pcie_l1_enable(sw))
+ tb_sw_warn(sw, "failed to enable PCIe L1 for Titan Ridge\n");
+
list_add_tail(&tunnel->list, &tcm->tunnel_list);
return 0;
}
diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h
index f416e4dcda76..74d3b14f004e 100644
--- a/drivers/thunderbolt/tb.h
+++ b/drivers/thunderbolt/tb.h
@@ -140,6 +140,7 @@ enum tb_clx {
* @cap_plug_events: Offset to the plug events capability (%0 if not found)
* @cap_vsec_tmu: Offset to the TMU vendor specific capability (%0 if not found)
* @cap_lc: Offset to the link controller capability (%0 if not found)
+ * @cap_lp: Offset to the low power (CLx for TBT) capability (%0 if not found)
* @is_unplugged: The switch is going away
* @drom: DROM of the switch (%NULL if not found)
* @nvm: Pointer to the NVM if the switch has one (%NULL otherwise)
@@ -192,6 +193,7 @@ struct tb_switch {
int cap_plug_events;
int cap_vsec_tmu;
int cap_lc;
+ int cap_lp;
bool is_unplugged;
u8 *drom;
struct tb_nvm *nvm;
@@ -972,6 +974,19 @@ static inline bool tb_switch_is_cl0s_enabled(const struct tb_switch *sw)
return sw->clx == TB_CL0S;
}
+/**
+ * tb_switch_is_clx_supported() - Is CLx supported on this type of router
+ * @sw: The router to check CLx support for
+ */
+static inline bool tb_switch_is_clx_supported(const struct tb_switch *sw)
+{
+ return tb_switch_is_usb4(sw) || tb_switch_is_titan_ridge(sw);
+}
+
+int tb_switch_mask_clx_objections(struct tb_switch *sw);
+
+int tb_switch_pcie_l1_enable(struct tb_switch *sw);
+
int tb_wait_for_port(struct tb_port *port, bool wait_if_unplugged);
int tb_port_add_nfc_credits(struct tb_port *port, int credits);
int tb_port_clear_counter(struct tb_port *port, int counter);
@@ -1065,6 +1080,7 @@ void tb_lc_unconfigure_port(struct tb_port *port);
int tb_lc_configure_xdomain(struct tb_port *port);
void tb_lc_unconfigure_xdomain(struct tb_port *port);
int tb_lc_start_lane_initialization(struct tb_port *port);
+bool tb_lc_is_clx_supported(struct tb_port *port);
int tb_lc_set_wake(struct tb_switch *sw, unsigned int flags);
int tb_lc_set_sleep(struct tb_switch *sw);
bool tb_lc_lane_bonding_possible(struct tb_switch *sw);
diff --git a/drivers/thunderbolt/tb_regs.h b/drivers/thunderbolt/tb_regs.h
index 105118ecc9cd..a74f4878d3e7 100644
--- a/drivers/thunderbolt/tb_regs.h
+++ b/drivers/thunderbolt/tb_regs.h
@@ -447,42 +447,78 @@ struct tb_regs_hop {
} __packed;
/* TMU Thunderbolt 3 registers */
-#define TB_TIME_VSEC_3_CS_26 0x1a
-#define TB_TIME_VSEC_3_CS_26_TD BIT(22)
+#define TB_TIME_VSEC_3_CS_9 0x9
+#define TB_TIME_VSEC_3_CS_9_TMU_OBJ_MASK GENMASK(17, 16)
+#define TB_TIME_VSEC_3_CS_26 0x1a
+#define TB_TIME_VSEC_3_CS_26_TD BIT(22)
+
+/*
+ * Used for Titan Ridge only. Bits are part of the same register: TMU_ADP_CS_6
+ * (see above) as in USB4 spec, but these specific bits used for Titan Ridge
+ * only and reserved in USB4 spec.
+ */
+#define TMU_ADP_CS_6_DISABLE_TMU_OBJ_MASK GENMASK(3, 2)
+#define TMU_ADP_CS_6_DISABLE_TMU_OBJ_CL1 BIT(2)
+#define TMU_ADP_CS_6_DISABLE_TMU_OBJ_CL2 BIT(3)
+
+/* Plug Events registers */
+#define TB_PLUG_EVENTS_PCIE_WR_DATA 0x1b
+#define TB_PLUG_EVENTS_PCIE_CMD 0x1c
+#define TB_PLUG_EVENTS_PCIE_CMD_DW_OFFSET_MASK GENMASK(9, 0)
+#define TB_PLUG_EVENTS_PCIE_CMD_BR_SHIFT 10
+#define TB_PLUG_EVENTS_PCIE_CMD_BR_MASK GENMASK(17, 10)
+#define TB_PLUG_EVENTS_PCIE_CMD_RD_WR_MASK BIT(21)
+#define TB_PLUG_EVENTS_PCIE_CMD_WR 0x1
+#define TB_PLUG_EVENTS_PCIE_CMD_COMMAND_SHIFT 22
+#define TB_PLUG_EVENTS_PCIE_CMD_COMMAND_MASK GENMASK(24, 22)
+#define TB_PLUG_EVENTS_PCIE_CMD_COMMAND_VAL 0x2
+#define TB_PLUG_EVENTS_PCIE_CMD_REQ_ACK_MASK BIT(30)
+#define TB_PLUG_EVENTS_PCIE_CMD_TIMEOUT_MASK BIT(31)
+#define TB_PLUG_EVENTS_PCIE_CMD_RD_DATA 0x1d
+
+/* CP Low Power registers */
+#define TB_LOW_PWR_C1_CL1 0x1
+#define TB_LOW_PWR_C1_CL1_OBJ_MASK GENMASK(4, 1)
+#define TB_LOW_PWR_C1_CL2_OBJ_MASK GENMASK(4, 1)
+#define TB_LOW_PWR_C1_PORT_A_MASK GENMASK(2, 1)
+#define TB_LOW_PWR_C0_PORT_B_MASK GENMASK(4, 3)
+#define TB_LOW_PWR_C3_CL1 0x3
/* Common link controller registers */
-#define TB_LC_DESC 0x02
-#define TB_LC_DESC_NLC_MASK GENMASK(3, 0)
-#define TB_LC_DESC_SIZE_SHIFT 8
-#define TB_LC_DESC_SIZE_MASK GENMASK(15, 8)
-#define TB_LC_DESC_PORT_SIZE_SHIFT 16
-#define TB_LC_DESC_PORT_SIZE_MASK GENMASK(27, 16)
-#define TB_LC_FUSE 0x03
-#define TB_LC_SNK_ALLOCATION 0x10
-#define TB_LC_SNK_ALLOCATION_SNK0_MASK GENMASK(3, 0)
-#define TB_LC_SNK_ALLOCATION_SNK0_CM 0x1
-#define TB_LC_SNK_ALLOCATION_SNK1_SHIFT 4
-#define TB_LC_SNK_ALLOCATION_SNK1_MASK GENMASK(7, 4)
-#define TB_LC_SNK_ALLOCATION_SNK1_CM 0x1
-#define TB_LC_POWER 0x740
+#define TB_LC_DESC 0x02
+#define TB_LC_DESC_NLC_MASK GENMASK(3, 0)
+#define TB_LC_DESC_SIZE_SHIFT 8
+#define TB_LC_DESC_SIZE_MASK GENMASK(15, 8)
+#define TB_LC_DESC_PORT_SIZE_SHIFT 16
+#define TB_LC_DESC_PORT_SIZE_MASK GENMASK(27, 16)
+#define TB_LC_FUSE 0x03
+#define TB_LC_SNK_ALLOCATION 0x10
+#define TB_LC_SNK_ALLOCATION_SNK0_MASK GENMASK(3, 0)
+#define TB_LC_SNK_ALLOCATION_SNK0_CM 0x1
+#define TB_LC_SNK_ALLOCATION_SNK1_SHIFT 4
+#define TB_LC_SNK_ALLOCATION_SNK1_MASK GENMASK(7, 4)
+#define TB_LC_SNK_ALLOCATION_SNK1_CM 0x1
+#define TB_LC_POWER 0x740
/* Link controller registers */
-#define TB_LC_PORT_ATTR 0x8d
-#define TB_LC_PORT_ATTR_BE BIT(12)
-
-#define TB_LC_SX_CTRL 0x96
-#define TB_LC_SX_CTRL_WOC BIT(1)
-#define TB_LC_SX_CTRL_WOD BIT(2)
-#define TB_LC_SX_CTRL_WODPC BIT(3)
-#define TB_LC_SX_CTRL_WODPD BIT(4)
-#define TB_LC_SX_CTRL_WOU4 BIT(5)
-#define TB_LC_SX_CTRL_WOP BIT(6)
-#define TB_LC_SX_CTRL_L1C BIT(16)
-#define TB_LC_SX_CTRL_L1D BIT(17)
-#define TB_LC_SX_CTRL_L2C BIT(20)
-#define TB_LC_SX_CTRL_L2D BIT(21)
-#define TB_LC_SX_CTRL_SLI BIT(29)
-#define TB_LC_SX_CTRL_UPSTREAM BIT(30)
-#define TB_LC_SX_CTRL_SLP BIT(31)
+#define TB_LC_PORT_ATTR 0x8d
+#define TB_LC_PORT_ATTR_BE BIT(12)
+
+#define TB_LC_SX_CTRL 0x96
+#define TB_LC_SX_CTRL_WOC BIT(1)
+#define TB_LC_SX_CTRL_WOD BIT(2)
+#define TB_LC_SX_CTRL_WODPC BIT(3)
+#define TB_LC_SX_CTRL_WODPD BIT(4)
+#define TB_LC_SX_CTRL_WOU4 BIT(5)
+#define TB_LC_SX_CTRL_WOP BIT(6)
+#define TB_LC_SX_CTRL_L1C BIT(16)
+#define TB_LC_SX_CTRL_L1D BIT(17)
+#define TB_LC_SX_CTRL_L2C BIT(20)
+#define TB_LC_SX_CTRL_L2D BIT(21)
+#define TB_LC_SX_CTRL_SLI BIT(29)
+#define TB_LC_SX_CTRL_UPSTREAM BIT(30)
+#define TB_LC_SX_CTRL_SLP BIT(31)
+#define TB_LC_LINK_ATTR 0x97
+#define TB_LC_LINK_ATTR_CPS BIT(18)
#endif
diff --git a/drivers/thunderbolt/tmu.c b/drivers/thunderbolt/tmu.c
index 8392d1352c98..e4a07a26f693 100644
--- a/drivers/thunderbolt/tmu.c
+++ b/drivers/thunderbolt/tmu.c
@@ -334,7 +334,12 @@ out:
*/
int tb_switch_tmu_disable(struct tb_switch *sw)
{
- if (!tb_switch_is_usb4(sw))
+ /*
+ * No need to disable TMU on devices that don't support CLx since
+ * on these devices e.g. Alpine Ridge and earlier, the TMU mode
+ * HiFi bi-directional is enabled by default and we don't change it.
+ */
+ if (!tb_switch_is_clx_supported(sw))
return 0;
/* Already disabled? */
@@ -450,6 +455,31 @@ out:
return ret;
}
+static int tb_switch_tmu_objection_mask(struct tb_switch *sw)
+{
+ u32 val;
+ int ret;
+
+ ret = tb_sw_read(sw, &val, TB_CFG_SWITCH,
+ sw->cap_vsec_tmu + TB_TIME_VSEC_3_CS_9, 1);
+ if (ret)
+ return ret;
+
+ val &= ~TB_TIME_VSEC_3_CS_9_TMU_OBJ_MASK;
+
+ return tb_sw_write(sw, &val, TB_CFG_SWITCH,
+ sw->cap_vsec_tmu + TB_TIME_VSEC_3_CS_9, 1);
+}
+
+static int tb_switch_tmu_unidirectional_enable(struct tb_switch *sw)
+{
+ struct tb_port *up = tb_upstream_port(sw);
+
+ return tb_port_tmu_write(up, TMU_ADP_CS_6,
+ TMU_ADP_CS_6_DISABLE_TMU_OBJ_MASK,
+ TMU_ADP_CS_6_DISABLE_TMU_OBJ_MASK);
+}
+
/*
* This function is called when the previous TMU mode was
* TB_SWITCH_TMU_RATE_OFF.
@@ -497,12 +527,31 @@ static int tb_switch_tmu_hifi_enable(struct tb_switch *sw)
if (unidirectional && !sw->tmu.has_ucap)
return -EOPNOTSUPP;
- if (!tb_switch_is_usb4(sw))
+ /*
+ * No need to enable TMU on devices that don't support CLx since on
+ * these devices e.g. Alpine Ridge and earlier, the TMU mode HiFi
+ * bi-directional is enabled by default.
+ */
+ if (!tb_switch_is_clx_supported(sw))
return 0;
if (tb_switch_tmu_hifi_is_enabled(sw, sw->tmu.unidirectional_request))
return 0;
+ if (tb_switch_is_titan_ridge(sw) && unidirectional) {
+ /* Titan Ridge supports only CL0s */
+ if (!tb_switch_is_cl0s_enabled(sw))
+ return -EOPNOTSUPP;
+
+ ret = tb_switch_tmu_objection_mask(sw);
+ if (ret)
+ return ret;
+
+ ret = tb_switch_tmu_unidirectional_enable(sw);
+ if (ret)
+ return ret;
+ }
+
ret = tb_switch_tmu_set_time_disruption(sw, true);
if (ret)
return ret;