summaryrefslogtreecommitdiffstats
path: root/drivers/thermal
diff options
context:
space:
mode:
authorMatthias Kaehlcke <mka@chromium.org>2018-07-31 11:59:15 -0700
committerEduardo Valentin <edubezval@gmail.com>2018-08-24 15:59:52 -0700
commitf1599f9e4cd6f1dd0cad202853fb830854f4e944 (patch)
tree339a2adf028ba1aac9a3c97e60242fb976235168 /drivers/thermal
parent97b27dd33d592b14cfb9299d5c89167ec57a3b83 (diff)
downloadlinux-f1599f9e4cd6f1dd0cad202853fb830854f4e944.tar.bz2
thermal: qcom-spmi: Use PMIC thermal stage 2 for critical trip points
There are three thermal stages defined in the PMIC: stage 1: warning stage 2: system should shut down stage 3: emergency shut down By default the PMIC assumes that the OS isn't doing anything and thus at stage 2 it does a partial PMIC shutdown and at stage 3 it kills all power. When switching between thermal stages the PMIC generates an interrupt which is handled by the driver. The partial PMIC shutdown at stage 2 can be disabled by software, which allows the OS to initiate a shutdown at stage 2 with a thermal zone configured accordingly. If a critical trip point is configured in the thermal zone the driver adjusts the stage 1-3 temperature thresholds to (closely) match the critical temperature with a stage 2 threshold (125/130/135/140 °C). If a suitable match is found the partial shutdown at stage 2 is disabled. If for some reason the system doesn't shutdown at stage 2 the emergency shutdown at stage 3 kicks in. The partial shutdown at stage 2 remains enabled in these cases: - no critical trip point defined - the temperature of the critical trip point is < 125°C - the temperature of the critical trip point is > 140°C and no ADC channel is configured (thus the OS is not notified when the critical temperature is reached) Suggested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Diffstat (limited to 'drivers/thermal')
-rw-r--r--drivers/thermal/qcom-spmi-temp-alarm.c158
1 files changed, 140 insertions, 18 deletions
diff --git a/drivers/thermal/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom-spmi-temp-alarm.c
index ad4f3a8d6560..b2d5d5bf4a9b 100644
--- a/drivers/thermal/qcom-spmi-temp-alarm.c
+++ b/drivers/thermal/qcom-spmi-temp-alarm.c
@@ -23,6 +23,8 @@
#include <linux/regmap.h>
#include <linux/thermal.h>
+#include "thermal_core.h"
+
#define QPNP_TM_REG_TYPE 0x04
#define QPNP_TM_REG_SUBTYPE 0x05
#define QPNP_TM_REG_STATUS 0x08
@@ -37,9 +39,11 @@
#define STATUS_GEN2_STATE_MASK GENMASK(6, 4)
#define STATUS_GEN2_STATE_SHIFT 4
-#define SHUTDOWN_CTRL1_OVERRIDE_MASK GENMASK(7, 6)
+#define SHUTDOWN_CTRL1_OVERRIDE_S2 BIT(6)
#define SHUTDOWN_CTRL1_THRESHOLD_MASK GENMASK(1, 0)
+#define SHUTDOWN_CTRL1_RATE_25HZ BIT(3)
+
#define ALARM_CTRL_FORCE_ENABLE BIT(7)
/*
@@ -56,12 +60,19 @@
#define TEMP_THRESH_STEP 5000 /* Threshold step: 5 C */
#define THRESH_MIN 0
+#define THRESH_MAX 3
+
+/* Stage 2 Threshold Min: 125 C */
+#define STAGE2_THRESHOLD_MIN 125000
+/* Stage 2 Threshold Max: 140 C */
+#define STAGE2_THRESHOLD_MAX 140000
/* Temperature in Milli Celsius reported during stage 0 if no ADC is present */
#define DEFAULT_TEMP 37000
struct qpnp_tm_chip {
struct regmap *map;
+ struct device *dev;
struct thermal_zone_device *tz_dev;
unsigned int subtype;
long temp;
@@ -69,6 +80,10 @@ struct qpnp_tm_chip {
unsigned int stage;
unsigned int prev_stage;
unsigned int base;
+ /* protects .thresh, .stage and chip registers */
+ struct mutex lock;
+ bool initialized;
+
struct iio_channel *adc;
};
@@ -125,6 +140,8 @@ static int qpnp_tm_update_temp_no_adc(struct qpnp_tm_chip *chip)
unsigned int stage, stage_new, stage_old;
int ret;
+ WARN_ON(!mutex_is_locked(&chip->lock));
+
ret = qpnp_tm_get_temp_stage(chip);
if (ret < 0)
return ret;
@@ -163,8 +180,15 @@ static int qpnp_tm_get_temp(void *data, int *temp)
if (!temp)
return -EINVAL;
+ if (!chip->initialized) {
+ *temp = DEFAULT_TEMP;
+ return 0;
+ }
+
if (!chip->adc) {
+ mutex_lock(&chip->lock);
ret = qpnp_tm_update_temp_no_adc(chip);
+ mutex_unlock(&chip->lock);
if (ret < 0)
return ret;
} else {
@@ -180,8 +204,72 @@ static int qpnp_tm_get_temp(void *data, int *temp)
return 0;
}
+static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip,
+ int temp)
+{
+ u8 reg;
+ bool disable_s2_shutdown = false;
+
+ WARN_ON(!mutex_is_locked(&chip->lock));
+
+ /*
+ * Default: S2 and S3 shutdown enabled, thresholds at
+ * 105C/125C/145C, monitoring at 25Hz
+ */
+ reg = SHUTDOWN_CTRL1_RATE_25HZ;
+
+ if (temp == THERMAL_TEMP_INVALID ||
+ temp < STAGE2_THRESHOLD_MIN) {
+ chip->thresh = THRESH_MIN;
+ goto skip;
+ }
+
+ if (temp <= STAGE2_THRESHOLD_MAX) {
+ chip->thresh = THRESH_MAX -
+ ((STAGE2_THRESHOLD_MAX - temp) /
+ TEMP_THRESH_STEP);
+ disable_s2_shutdown = true;
+ } else {
+ chip->thresh = THRESH_MAX;
+
+ if (chip->adc)
+ disable_s2_shutdown = true;
+ else
+ dev_warn(chip->dev,
+ "No ADC is configured and critical temperature is above the maximum stage 2 threshold of 140 C! Configuring stage 2 shutdown at 140 C.\n");
+ }
+
+skip:
+ reg |= chip->thresh;
+ if (disable_s2_shutdown)
+ reg |= SHUTDOWN_CTRL1_OVERRIDE_S2;
+
+ return qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg);
+}
+
+static int qpnp_tm_set_trip_temp(void *data, int trip, int temp)
+{
+ struct qpnp_tm_chip *chip = data;
+ const struct thermal_trip *trip_points;
+ int ret;
+
+ trip_points = of_thermal_get_trip_points(chip->tz_dev);
+ if (!trip_points)
+ return -EINVAL;
+
+ if (trip_points[trip].type != THERMAL_TRIP_CRITICAL)
+ return 0;
+
+ mutex_lock(&chip->lock);
+ ret = qpnp_tm_update_critical_trip_temp(chip, temp);
+ mutex_unlock(&chip->lock);
+
+ return ret;
+}
+
static const struct thermal_zone_of_device_ops qpnp_tm_sensor_ops = {
.get_temp = qpnp_tm_get_temp,
+ .set_trip_temp = qpnp_tm_set_trip_temp,
};
static irqreturn_t qpnp_tm_isr(int irq, void *data)
@@ -193,6 +281,29 @@ static irqreturn_t qpnp_tm_isr(int irq, void *data)
return IRQ_HANDLED;
}
+static int qpnp_tm_get_critical_trip_temp(struct qpnp_tm_chip *chip)
+{
+ int ntrips;
+ const struct thermal_trip *trips;
+ int i;
+
+ ntrips = of_thermal_get_ntrips(chip->tz_dev);
+ if (ntrips <= 0)
+ return THERMAL_TEMP_INVALID;
+
+ trips = of_thermal_get_trip_points(chip->tz_dev);
+ if (!trips)
+ return THERMAL_TEMP_INVALID;
+
+ for (i = 0; i < ntrips; i++) {
+ if (of_thermal_is_trip_valid(chip->tz_dev, i) &&
+ trips[i].type == THERMAL_TRIP_CRITICAL)
+ return trips[i].temperature;
+ }
+
+ return THERMAL_TEMP_INVALID;
+}
+
/*
* This function initializes the internal temp value based on only the
* current thermal stage and threshold. Setup threshold control and
@@ -203,17 +314,20 @@ static int qpnp_tm_init(struct qpnp_tm_chip *chip)
unsigned int stage;
int ret;
u8 reg = 0;
+ int crit_temp;
+
+ mutex_lock(&chip->lock);
ret = qpnp_tm_read(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, &reg);
if (ret < 0)
- return ret;
+ goto out;
chip->thresh = reg & SHUTDOWN_CTRL1_THRESHOLD_MASK;
chip->temp = DEFAULT_TEMP;
ret = qpnp_tm_get_temp_stage(chip);
if (ret < 0)
- return ret;
+ goto out;
chip->stage = ret;
stage = chip->subtype == QPNP_TM_SUBTYPE_GEN1
@@ -224,21 +338,19 @@ static int qpnp_tm_init(struct qpnp_tm_chip *chip)
(stage - 1) * TEMP_STAGE_STEP +
TEMP_THRESH_MIN;
- /*
- * Set threshold and disable software override of stage 2 and 3
- * shutdowns.
- */
- chip->thresh = THRESH_MIN;
- reg &= ~(SHUTDOWN_CTRL1_OVERRIDE_MASK | SHUTDOWN_CTRL1_THRESHOLD_MASK);
- reg |= chip->thresh & SHUTDOWN_CTRL1_THRESHOLD_MASK;
- ret = qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg);
+ crit_temp = qpnp_tm_get_critical_trip_temp(chip);
+ ret = qpnp_tm_update_critical_trip_temp(chip, crit_temp);
if (ret < 0)
- return ret;
+ goto out;
/* Enable the thermal alarm PMIC module in always-on mode. */
reg = ALARM_CTRL_FORCE_ENABLE;
ret = qpnp_tm_write(chip, QPNP_TM_REG_ALARM_CTRL, reg);
+ chip->initialized = true;
+
+out:
+ mutex_unlock(&chip->lock);
return ret;
}
@@ -257,6 +369,9 @@ static int qpnp_tm_probe(struct platform_device *pdev)
return -ENOMEM;
dev_set_drvdata(&pdev->dev, chip);
+ chip->dev = &pdev->dev;
+
+ mutex_init(&chip->lock);
chip->map = dev_get_regmap(pdev->dev.parent, NULL);
if (!chip->map)
@@ -302,6 +417,18 @@ static int qpnp_tm_probe(struct platform_device *pdev)
chip->subtype = subtype;
+ /*
+ * Register the sensor before initializing the hardware to be able to
+ * read the trip points. get_temp() returns the default temperature
+ * before the hardware initialization is completed.
+ */
+ chip->tz_dev = devm_thermal_zone_of_sensor_register(
+ &pdev->dev, 0, chip, &qpnp_tm_sensor_ops);
+ if (IS_ERR(chip->tz_dev)) {
+ dev_err(&pdev->dev, "failed to register sensor\n");
+ return PTR_ERR(chip->tz_dev);
+ }
+
ret = qpnp_tm_init(chip);
if (ret < 0) {
dev_err(&pdev->dev, "init failed\n");
@@ -313,12 +440,7 @@ static int qpnp_tm_probe(struct platform_device *pdev)
if (ret < 0)
return ret;
- chip->tz_dev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, chip,
- &qpnp_tm_sensor_ops);
- if (IS_ERR(chip->tz_dev)) {
- dev_err(&pdev->dev, "failed to register sensor\n");
- return PTR_ERR(chip->tz_dev);
- }
+ thermal_zone_device_update(chip->tz_dev, THERMAL_EVENT_UNSPECIFIED);
return 0;
}