diff options
| author | Varun Prakash <varun@chelsio.com> | 2017-01-20 16:44:33 +0530 |
|---|---|---|
| committer | Nicholas Bellinger <nab@linux-iscsi.org> | 2017-02-18 21:24:21 -0800 |
| commit | 4d65491c269729a1e3b375c45e73213f49103d33 (patch) | |
| tree | d00d04219173f42c47d042f32b0f48afabc9d7c2 /drivers/target | |
| parent | 79e57cfe00f40d509e2d007a5662db26cdbc74db (diff) | |
| download | linux-4d65491c269729a1e3b375c45e73213f49103d33.tar.bz2 | |
target/iscsi: Fix unsolicited data seq_end_offset calculation
In case of unsolicited data for the first sequence
seq_end_offset must be set to minimum of total data length
and FirstBurstLength, so do not add cmd->write_data_done
to the min of total data length and FirstBurstLength.
This patch avoids that with ImmediateData=Yes, InitialR2T=No,
MaxXmitDataSegmentLength < FirstBurstLength that a WRITE command
with IO size above FirstBurstLength triggers sequence error
messages, for example
Set following parameters on target (linux-4.8.12)
ImmediateData = Yes
InitialR2T = No
MaxXmitDataSegmentLength = 8k
FirstBurstLength = 64k
Log in from Open iSCSI initiator and execute
dd if=/dev/zero of=/dev/sdb bs=128k count=1 oflag=direct
Error messages on target
Command ITT: 0x00000035 with Offset: 65536, Length: 8192 outside
of Sequence 73728:131072 while DataSequenceInOrder=Yes.
Command ITT: 0x00000035, received DataSN: 0x00000001 higher than
expected 0x00000000.
Unable to perform within-command recovery while ERL=0.
Signed-off-by: Varun Prakash <varun@chelsio.com>
[ bvanassche: Use min() instead of open-coding it / edited patch description ]
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Diffstat (limited to 'drivers/target')
| -rw-r--r-- | drivers/target/iscsi/iscsi_target_erl0.c | 6 |
1 files changed, 2 insertions, 4 deletions
diff --git a/drivers/target/iscsi/iscsi_target_erl0.c b/drivers/target/iscsi/iscsi_target_erl0.c index b54e72c7ab0f..a8bcbc43b047 100644 --- a/drivers/target/iscsi/iscsi_target_erl0.c +++ b/drivers/target/iscsi/iscsi_target_erl0.c @@ -44,10 +44,8 @@ void iscsit_set_dataout_sequence_values( */ if (cmd->unsolicited_data) { cmd->seq_start_offset = cmd->write_data_done; - cmd->seq_end_offset = (cmd->write_data_done + - ((cmd->se_cmd.data_length > - conn->sess->sess_ops->FirstBurstLength) ? - conn->sess->sess_ops->FirstBurstLength : cmd->se_cmd.data_length)); + cmd->seq_end_offset = min(cmd->se_cmd.data_length, + conn->sess->sess_ops->FirstBurstLength); return; } |