[SCSI] target: Add LIO target core v4.0.0-rc6

LIO target is a full featured in-kernel target framework with the
following feature set:

High-performance, non-blocking, multithreaded architecture with SIMD
support.

Advanced SCSI feature set:

    * Persistent Reservations (PRs)
    * Asymmetric Logical Unit Assignment (ALUA)
    * Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
    * Full Error Recovery (ERL=0,1,2)
    * Active/active task migration and session continuation (ERL=2)
    * Thin LUN provisioning (UNMAP and WRITE_SAMExx)

Multiprotocol target plugins

Storage media independence:

    * Virtualization of all storage media; transparent mapping of IO to LUNs
    * No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
    * Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.

Standards compliance:

    * Full compliance with IETF (RFC 3720)
    * Full implementation of SPC-4 PRs and ALUA

Significant code cleanups done by Christoph Hellwig.

[jejb: fix up for new block bdev exclusive interface. Minor fixes from
 Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

1 files changed, 67 insertions, 0 deletions

diff --git a/drivers/target/target_core_pr.h b/drivers/target/target_core_pr.h
new file mode 100644
index 000000000000..5603bcfd86d3
--- /dev/null
+++ b/drivers/target/target_core_pr.h
@@ -0,0 +1,67 @@
+#ifndef TARGET_CORE_PR_H
+#define TARGET_CORE_PR_H
+/*
+ * PERSISTENT_RESERVE_OUT service action codes
+ *
+ * spc4r17 section 6.14.2 Table 171
+ */
+#define PRO_REGISTER				0x00
+#define PRO_RESERVE				0x01
+#define PRO_RELEASE				0x02
+#define PRO_CLEAR				0x03
+#define PRO_PREEMPT				0x04
+#define PRO_PREEMPT_AND_ABORT			0x05
+#define PRO_REGISTER_AND_IGNORE_EXISTING_KEY	0x06
+#define PRO_REGISTER_AND_MOVE			0x07
+/*
+ * PERSISTENT_RESERVE_IN service action codes
+ *
+ * spc4r17 section 6.13.1 Table 159
+ */
+#define PRI_READ_KEYS				0x00
+#define PRI_READ_RESERVATION			0x01
+#define PRI_REPORT_CAPABILITIES			0x02
+#define PRI_READ_FULL_STATUS			0x03
+/*
+ * PERSISTENT_RESERVE_ SCOPE field
+ *
+ * spc4r17 section 6.13.3.3 Table 163
+ */
+#define PR_SCOPE_LU_SCOPE			0x00
+/*
+ * PERSISTENT_RESERVE_* TYPE field
+ *
+ * spc4r17 section 6.13.3.4 Table 164
+ */
+#define PR_TYPE_WRITE_EXCLUSIVE			0x01
+#define PR_TYPE_EXCLUSIVE_ACCESS		0x03
+#define PR_TYPE_WRITE_EXCLUSIVE_REGONLY		0x05
+#define PR_TYPE_EXCLUSIVE_ACCESS_REGONLY	0x06
+#define PR_TYPE_WRITE_EXCLUSIVE_ALLREG		0x07
+#define PR_TYPE_EXCLUSIVE_ACCESS_ALLREG		0x08
+
+#define PR_APTPL_MAX_IPORT_LEN			256
+#define PR_APTPL_MAX_TPORT_LEN			256
+
+extern struct kmem_cache *t10_pr_reg_cache;
+
+extern int core_pr_dump_initiator_port(struct t10_pr_registration *,
+			char *, u32);
+extern int core_scsi2_emulate_crh(struct se_cmd *);
+extern int core_scsi3_alloc_aptpl_registration(
+			struct t10_reservation_template *, u64,
+			unsigned char *, unsigned char *, u32,
+			unsigned char *, u16, u32, int, int, u8);
+extern int core_scsi3_check_aptpl_registration(struct se_device *,
+			struct se_portal_group *, struct se_lun *,
+			struct se_lun_acl *);
+extern void core_scsi3_free_pr_reg_from_nacl(struct se_device *,
+					     struct se_node_acl *);
+extern void core_scsi3_free_all_registrations(struct se_device *);
+extern unsigned char *core_scsi3_pr_dump_type(int);
+extern int core_scsi3_check_cdb_abort_and_preempt(struct list_head *,
+						  struct se_cmd *);
+extern int core_scsi3_emulate_pr(struct se_cmd *);
+extern int core_setup_reservations(struct se_device *, int);
+
+#endif /* TARGET_CORE_PR_H */