diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2009-12-05 09:42:59 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2009-12-05 09:42:59 -0800 |
commit | d9b2c4d0b03c721808c0d259e43a27f1e80205bc (patch) | |
tree | f17a4166f62ee14faa1401a6cbd353a4ab8c77cb /drivers/staging | |
parent | 27d16d08717faeaa8afd1b736a096dbaab90f08e (diff) | |
parent | 5fa9167a1bf5f5a4b7282f5e7ac56a4a5a1fa044 (diff) | |
download | linux-d9b2c4d0b03c721808c0d259e43a27f1e80205bc.tar.bz2 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (50 commits)
pcmcia: rework the irq_req_t typedef
pcmcia: remove deprecated handle_to_dev() macro
pcmcia: pcmcia_request_window() doesn't need a pointer to a pointer
pcmcia: remove unused "window_t" typedef
pcmcia: move some window-related code to pcmcia_ioctl.c
pcmcia: Change window_handle_t logic to unsigned long
pcmcia: Pass struct pcmcia_socket to pcmcia_get_mem_page()
pcmcia: Pass struct pcmcia_device to pcmcia_map_mem_page()
pcmcia: Pass struct pcmcia_device to pcmcia_release_window()
drivers/pcmcia: remove unnecessary kzalloc
pcmcia: correct handling for Zoomed Video registers in topic.h
pcmcia: fix printk formats
pcmcia: autoload module pcmcia
pcmcia/staging: update comedi drivers
PCMCIA: stop duplicating pci_irq in soc_pcmcia_socket
PCMCIA: ss: allow PCI IRQs > 255
PCMCIA: soc_common: remove 'dev' member from soc_pcmcia_socket
PCMCIA: soc_common: constify soc_pcmcia_socket ops member
PCMCIA: sa1111: remove duplicated initializers
PCMCIA: sa1111: wrap soc_pcmcia_socket to contain sa1111 specific data
...
Diffstat (limited to 'drivers/staging')
-rw-r--r-- | drivers/staging/comedi/drivers/cb_das16_cs.c | 221 | ||||
-rw-r--r-- | drivers/staging/comedi/drivers/das08_cs.c | 203 | ||||
-rw-r--r-- | drivers/staging/comedi/drivers/ni_daq_700.c | 237 | ||||
-rw-r--r-- | drivers/staging/comedi/drivers/ni_daq_dio24.c | 236 | ||||
-rw-r--r-- | drivers/staging/comedi/drivers/ni_labpc_cs.c | 225 | ||||
-rw-r--r-- | drivers/staging/comedi/drivers/ni_mio_cs.c | 127 | ||||
-rw-r--r-- | drivers/staging/comedi/drivers/quatech_daqp_cs.c | 219 |
7 files changed, 423 insertions, 1045 deletions
diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c index 80c0df8656f3..39923cb388be 100644 --- a/drivers/staging/comedi/drivers/cb_das16_cs.c +++ b/drivers/staging/comedi/drivers/cb_das16_cs.c @@ -141,37 +141,14 @@ static int das16cs_timer_insn_config(struct comedi_device *dev, struct comedi_insn *insn, unsigned int *data); -static int get_prodid(struct comedi_device *dev, struct pcmcia_device *link) -{ - tuple_t tuple; - u_short buf[128]; - int prodid = 0; - - tuple.TupleData = (cisdata_t *) buf; - tuple.TupleOffset = 0; - tuple.TupleDataMax = 255; - tuple.DesiredTuple = CISTPL_MANFID; - tuple.Attributes = TUPLE_RETURN_COMMON; - if ((pcmcia_get_first_tuple(link, &tuple) == 0) && - (pcmcia_get_tuple_data(link, &tuple) == 0)) { - prodid = le16_to_cpu(buf[1]); - } - - return prodid; -} - static const struct das16cs_board *das16cs_probe(struct comedi_device *dev, struct pcmcia_device *link) { - int id; int i; - id = get_prodid(dev, link); - for (i = 0; i < n_boards; i++) { - if (das16cs_boards[i].device_id == id) { + if (das16cs_boards[i].device_id == link->card_id) return das16cs_boards + i; - } } printk("unknown board!\n"); @@ -660,27 +637,8 @@ static int das16cs_timer_insn_config(struct comedi_device *dev, ======================================================================*/ -/* - All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If - you do not define PCMCIA_DEBUG at all, all the debug code will be - left out. If you compile with PCMCIA_DEBUG=0, the debug code will - be present but disabled -- but it can then be enabled for specific - modules at load time with a 'pc_debug=#' option to insmod. -*/ #if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE) -#ifdef PCMCIA_DEBUG -static int pc_debug = PCMCIA_DEBUG; -module_param(pc_debug, int, 0644); -#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args) -static char *version = - "cb_das16_cs.c pcmcia code (David Schleef), modified from dummy_cs.c 1.31 2001/08/24 12:13:13 (David Hinds)"; -#else -#define DEBUG(n, args...) -#endif - -/*====================================================================*/ - static void das16cs_pcmcia_config(struct pcmcia_device *link); static void das16cs_pcmcia_release(struct pcmcia_device *link); static int das16cs_pcmcia_suspend(struct pcmcia_device *p_dev); @@ -733,7 +691,7 @@ static int das16cs_pcmcia_attach(struct pcmcia_device *link) { struct local_info_t *local; - DEBUG(0, "das16cs_pcmcia_attach()\n"); + dev_dbg(&link->dev, "das16cs_pcmcia_attach()\n"); /* Allocate space for private device-specific data */ local = kzalloc(sizeof(struct local_info_t), GFP_KERNEL); @@ -745,7 +703,6 @@ static int das16cs_pcmcia_attach(struct pcmcia_device *link) /* Initialize the pcmcia_device structure */ /* Interrupt setup */ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - link->irq.IRQInfo1 = IRQ_LEVEL_ID; link->irq.Handler = NULL; link->conf.Attributes = 0; @@ -760,7 +717,7 @@ static int das16cs_pcmcia_attach(struct pcmcia_device *link) static void das16cs_pcmcia_detach(struct pcmcia_device *link) { - DEBUG(0, "das16cs_pcmcia_detach(0x%p)\n", link); + dev_dbg(&link->dev, "das16cs_pcmcia_detach\n"); if (link->dev_node) { ((struct local_info_t *)link->priv)->stop = 1; @@ -771,118 +728,55 @@ static void das16cs_pcmcia_detach(struct pcmcia_device *link) kfree(link->priv); } /* das16cs_pcmcia_detach */ -static void das16cs_pcmcia_config(struct pcmcia_device *link) -{ - struct local_info_t *dev = link->priv; - tuple_t tuple; - cisparse_t parse; - int last_fn, last_ret; - u_char buf[64]; - cistpl_cftable_entry_t dflt = { 0 }; - DEBUG(0, "das16cs_pcmcia_config(0x%p)\n", link); - - /* - This reads the card's CONFIG tuple to find its configuration - registers. - */ - tuple.DesiredTuple = CISTPL_CONFIG; - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - - last_fn = GetFirstTuple; - last_ret = pcmcia_get_first_tuple(link, &tuple); - if (last_ret != 0) - goto cs_failed; - - last_fn = GetTupleData; - last_ret = pcmcia_get_tuple_data(link, &tuple); - if (last_ret != 0) - goto cs_failed; - - last_fn = ParseTuple; - last_ret = pcmcia_parse_tuple(&tuple, &parse); - if (last_ret != 0) - goto cs_failed; - - link->conf.ConfigBase = parse.config.base; - link->conf.Present = parse.config.rmask[0]; +static int das16cs_pcmcia_config_loop(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + if (cfg->index == 0) + return -EINVAL; - /* - In this loop, we scan the CIS for configuration table entries, - each of which describes a valid card configuration, including - voltage, IO window, memory window, and interrupt settings. - - We make no assumptions about the card to be configured: we use - just the information available in the CIS. In an ideal world, - this would work for any PCMCIA card, but it requires a complete - and accurate CIS. In practice, a driver usually "knows" most of - these things without consulting the CIS, and most client drivers - will only use the CIS to fill in implementation-defined details. - */ - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - last_fn = GetFirstTuple; - - last_ret = pcmcia_get_first_tuple(link, &tuple); - if (last_ret) - goto cs_failed; - - while (1) { - cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); - if (pcmcia_get_tuple_data(link, &tuple)) - goto next_entry; - if (pcmcia_parse_tuple(&tuple, &parse)) - goto next_entry; - - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) - dflt = *cfg; - if (cfg->index == 0) - goto next_entry; - link->conf.ConfigIndex = cfg->index; - - /* Does this card need audio output? */ -/* if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - } -*/ - /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) - link->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - link->io.NumPorts1 = link->io.NumPorts2 = 0; - if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - link->io.BasePort1 = io->win[0].base; - link->io.NumPorts1 = io->win[0].len; - if (io->nwin > 1) { - link->io.Attributes2 = link->io.Attributes1; - link->io.BasePort2 = io->win[1].base; - link->io.NumPorts2 = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(link, &link->io)) - goto next_entry; + /* Do we need to allocate an interrupt? */ + if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(io->flags & CISTPL_IO_8BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(io->flags & CISTPL_IO_16BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; + if (io->nwin > 1) { + p_dev->io.Attributes2 = p_dev->io.Attributes1; + p_dev->io.BasePort2 = io->win[1].base; + p_dev->io.NumPorts2 = io->win[1].len; } + /* This reserves IO space but doesn't actually enable it */ + return pcmcia_request_io(p_dev, &p_dev->io); + } - /* If we got this far, we're cool! */ - break; + return 0; +} + +static void das16cs_pcmcia_config(struct pcmcia_device *link) +{ + struct local_info_t *dev = link->priv; + int ret; -next_entry: - last_fn = GetNextTuple; + dev_dbg(&link->dev, "das16cs_pcmcia_config\n"); - last_ret = pcmcia_get_next_tuple(link, &tuple); - if (last_ret) - goto cs_failed; + ret = pcmcia_loop_config(link, das16cs_pcmcia_config_loop, NULL); + if (ret) { + dev_warn(&link->dev, "no configuration found\n"); + goto failed; } /* @@ -891,21 +785,18 @@ next_entry: irq structure is initialized. */ if (link->conf.Attributes & CONF_ENABLE_IRQ) { - last_fn = RequestIRQ; - - last_ret = pcmcia_request_irq(link, &link->irq); - if (last_ret) - goto cs_failed; + ret = pcmcia_request_irq(link, &link->irq); + if (ret) + goto failed; } /* This actually configures the PCMCIA socket -- setting up the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ - last_fn = RequestConfiguration; - last_ret = pcmcia_request_configuration(link, &link->conf); - if (last_ret) - goto cs_failed; + ret = pcmcia_request_configuration(link, &link->conf); + if (ret) + goto failed; /* At this point, the dev_node_t structure(s) need to be @@ -930,14 +821,13 @@ next_entry: return; -cs_failed: - cs_error(link, last_fn, last_ret); +failed: das16cs_pcmcia_release(link); } /* das16cs_pcmcia_config */ static void das16cs_pcmcia_release(struct pcmcia_device *link) { - DEBUG(0, "das16cs_pcmcia_release(0x%p)\n", link); + dev_dbg(&link->dev, "das16cs_pcmcia_release\n"); pcmcia_disable_device(link); } /* das16cs_pcmcia_release */ @@ -983,14 +873,13 @@ struct pcmcia_driver das16cs_driver = { static int __init init_das16cs_pcmcia_cs(void) { - DEBUG(0, "%s\n", version); pcmcia_register_driver(&das16cs_driver); return 0; } static void __exit exit_das16cs_pcmcia_cs(void) { - DEBUG(0, "das16cs_pcmcia_cs: unloading\n"); + pr_debug("das16cs_pcmcia_cs: unloading\n"); pcmcia_unregister_driver(&das16cs_driver); } diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c index 9cab21eaaa18..9b945e5fdd32 100644 --- a/drivers/staging/comedi/drivers/das08_cs.c +++ b/drivers/staging/comedi/drivers/das08_cs.c @@ -110,25 +110,6 @@ static int das08_cs_attach(struct comedi_device *dev, ======================================================================*/ -/* - All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If - you do not define PCMCIA_DEBUG at all, all the debug code will be - left out. If you compile with PCMCIA_DEBUG=0, the debug code will - be present but disabled -- but it can then be enabled for specific - modules at load time with a 'pc_debug=#' option to insmod. -*/ - -#ifdef PCMCIA_DEBUG -static int pc_debug = PCMCIA_DEBUG; -module_param(pc_debug, int, 0644); -#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args) -static const char *version = - "das08.c pcmcia code (Frank Hess), modified from dummy_cs.c 1.31 2001/08/24 12:13:13 (David Hinds)"; -#else -#define DEBUG(n, args...) -#endif - -/*====================================================================*/ static void das08_pcmcia_config(struct pcmcia_device *link); static void das08_pcmcia_release(struct pcmcia_device *link); static int das08_pcmcia_suspend(struct pcmcia_device *p_dev); @@ -181,7 +162,7 @@ static int das08_pcmcia_attach(struct pcmcia_device *link) { struct local_info_t *local; - DEBUG(0, "das08_pcmcia_attach()\n"); + dev_dbg(&link->dev, "das08_pcmcia_attach()\n"); /* Allocate space for private device-specific data */ local = kzalloc(sizeof(struct local_info_t), GFP_KERNEL); @@ -192,7 +173,6 @@ static int das08_pcmcia_attach(struct pcmcia_device *link) /* Interrupt setup */ link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; - link->irq.IRQInfo1 = IRQ_LEVEL_ID; link->irq.Handler = NULL; /* @@ -224,7 +204,7 @@ static int das08_pcmcia_attach(struct pcmcia_device *link) static void das08_pcmcia_detach(struct pcmcia_device *link) { - DEBUG(0, "das08_pcmcia_detach(0x%p)\n", link); + dev_dbg(&link->dev, "das08_pcmcia_detach\n"); if (link->dev_node) { ((struct local_info_t *)link->priv)->stop = 1; @@ -237,6 +217,44 @@ static void das08_pcmcia_detach(struct pcmcia_device *link) } /* das08_pcmcia_detach */ + +static int das08_pcmcia_config_loop(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + if (cfg->index == 0) + return -ENODEV; + + /* Do we need to allocate an interrupt? */ + if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(io->flags & CISTPL_IO_8BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(io->flags & CISTPL_IO_16BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; + if (io->nwin > 1) { + p_dev->io.Attributes2 = p_dev->io.Attributes1; + p_dev->io.BasePort2 = io->win[1].base; + p_dev->io.NumPorts2 = io->win[1].len; + } + /* This reserves IO space but doesn't actually enable it */ + return pcmcia_request_io(p_dev, &p_dev->io); + } + return 0; +} + + /*====================================================================== das08_pcmcia_config() is scheduled to run after a CARD_INSERTION event @@ -248,128 +266,20 @@ static void das08_pcmcia_detach(struct pcmcia_device *link) static void das08_pcmcia_config(struct pcmcia_device *link) { struct local_info_t *dev = link->priv; - tuple_t tuple; - cisparse_t parse; - int last_fn, last_ret; - u_char buf[64]; - cistpl_cftable_entry_t dflt = { 0 }; - - DEBUG(0, "das08_pcmcia_config(0x%p)\n", link); - - /* - This reads the card's CONFIG tuple to find its configuration - registers. - */ - tuple.DesiredTuple = CISTPL_CONFIG; - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - last_fn = GetFirstTuple; - - last_ret = pcmcia_get_first_tuple(link, &tuple); - if (last_ret) - goto cs_failed; - - last_fn = GetTupleData; - - last_ret = pcmcia_get_tuple_data(link, &tuple); - if (last_ret) - goto cs_failed; - - last_fn = ParseTuple; - - last_ret = pcmcia_parse_tuple(&tuple, &parse); - if (last_ret) - goto cs_failed; - - link->conf.ConfigBase = parse.config.base; - link->conf.Present = parse.config.rmask[0]; - - /* - In this loop, we scan the CIS for configuration table entries, - each of which describes a valid card configuration, including - voltage, IO window, memory window, and interrupt settings. - - We make no assumptions about the card to be configured: we use - just the information available in the CIS. In an ideal world, - this would work for any PCMCIA card, but it requires a complete - and accurate CIS. In practice, a driver usually "knows" most of - these things without consulting the CIS, and most client drivers - will only use the CIS to fill in implementation-defined details. - */ - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - last_fn = GetFirstTuple; - - last_ret = pcmcia_get_first_tuple(link, &tuple); - if (last_ret) - goto cs_failed; - - while (1) { - cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); - - last_ret = pcmcia_get_tuple_data(link, &tuple); - if (last_ret) - goto next_entry; - - last_ret = pcmcia_parse_tuple(&tuple, &parse); - if (last_ret) - goto next_entry; - - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) - dflt = *cfg; - if (cfg->index == 0) - goto next_entry; - link->conf.ConfigIndex = cfg->index; - - /* Does this card need audio output? */ -/* if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - } -*/ - /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) - link->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - link->io.NumPorts1 = link->io.NumPorts2 = 0; - if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - link->io.BasePort1 = io->win[0].base; - link->io.NumPorts1 = io->win[0].len; - if (io->nwin > 1) { - link->io.Attributes2 = link->io.Attributes1; - link->io.BasePort2 = io->win[1].base; - link->io.NumPorts2 = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(link, &link->io) != 0) - goto next_entry; - } - - /* If we got this far, we're cool! */ - break; + int ret; -next_entry: - last_fn = GetNextTuple; + dev_dbg(&link->dev, "das08_pcmcia_config\n"); - last_ret = pcmcia_get_next_tuple(link, &tuple); - if (last_ret) - goto cs_failed; + ret = pcmcia_loop_config(link, das08_pcmcia_config_loop, NULL); + if (ret) { + dev_warn(&link->dev, "no configuration found\n"); + goto failed; } if (link->conf.Attributes & CONF_ENABLE_IRQ) { - last_fn = RequestIRQ; - last_ret = pcmcia_request_irq(link, &link->irq); - if (last_ret) - goto cs_failed; + ret = pcmcia_request_irq(link, &link->irq); + if (ret) + goto failed; } /* @@ -377,10 +287,9 @@ next_entry: the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ - last_fn = RequestConfiguration; - last_ret = pcmcia_request_configuration(link, &link->conf); - if (last_ret) - goto cs_failed; + ret = pcmcia_request_configuration(link, &link->conf); + if (ret) + goto failed; /* At this point, the dev_node_t structure(s) need to be @@ -405,8 +314,7 @@ next_entry: return; -cs_failed: - cs_error(link, last_fn, last_ret); +failed: das08_pcmcia_release(link); } /* das08_pcmcia_config */ @@ -421,7 +329,7 @@ cs_failed: static void das08_pcmcia_release(struct pcmcia_device *link) { - DEBUG(0, "das08_pcmcia_release(0x%p)\n", link); + dev_dbg(&link->dev, "das08_pcmcia_release\n"); pcmcia_disable_device(link); } /* das08_pcmcia_release */ @@ -477,14 +385,13 @@ struct pcmcia_driver das08_cs_driver = { static int __init init_das08_pcmcia_cs(void) { - DEBUG(0, "%s\n", version); pcmcia_register_driver(&das08_cs_driver); return 0; } static void __exit exit_das08_pcmcia_cs(void) { - DEBUG(0, "das08_pcmcia_cs: unloading\n"); + pr_debug("das08_pcmcia_cs: unloading\n"); pcmcia_unregister_driver(&das08_cs_driver); } diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c index ec31a3970664..ef5e1183d47d 100644 --- a/drivers/staging/comedi/drivers/ni_daq_700.c +++ b/drivers/staging/comedi/drivers/ni_daq_700.c @@ -436,25 +436,7 @@ static int dio700_detach(struct comedi_device *dev) return 0; }; -/* PCMCIA crap */ - -/* - All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If - you do not define PCMCIA_DEBUG at all, all the debug code will be - left out. If you compile with PCMCIA_DEBUG=0, the debug code will - be present but disabled -- but it can then be enabled for specific - modules at load time with a 'pc_debug=#' option to insmod. -*/ -#ifdef PCMCIA_DEBUG -static int pc_debug = PCMCIA_DEBUG; -module_param(pc_debug, int, 0644); -#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args) -static char *version = "ni_daq_700.c, based on dummy_cs.c"; -#else -#define DEBUG(n, args...) -#endif - -/*====================================================================*/ +/* PCMCIA crap -- watch your words, please! */ static void dio700_config(struct pcmcia_device *link); static void dio700_release(struct pcmcia_device *link); @@ -510,7 +492,7 @@ static int dio700_cs_attach(struct pcmcia_device *link) printk(KERN_INFO "ni_daq_700: cs-attach\n"); - DEBUG(0, "dio700_cs_attach()\n"); + dev_dbg(&link->dev, "dio700_cs_attach()\n"); /* Allocate space for private device-specific data */ local = kzalloc(sizeof(struct local_info_t), GFP_KERNEL); @@ -521,7 +503,6 @@ static int dio700_cs_attach(struct pcmcia_device *link) /* Interrupt setup */ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - link->irq.IRQInfo1 = IRQ_LEVEL_ID; link->irq.Handler = NULL; /* @@ -555,7 +536,7 @@ static void dio700_cs_detach(struct pcmcia_device *link) printk(KERN_INFO "ni_daq_700: cs-detach!\n"); - DEBUG(0, "dio700_cs_detach(0x%p)\n", link); + dev_dbg(&link->dev, "dio700_cs_detach\n"); if (link->dev_node) { ((struct local_info_t *)link->priv)->stop = 1; @@ -576,141 +557,85 @@ static void dio700_cs_detach(struct pcmcia_device *link) ======================================================================*/ -static void dio700_config(struct pcmcia_device *link) +static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) { - struct local_info_t *dev = link->priv; - tuple_t tuple; - cisparse_t parse; - int last_ret; - u_char buf[64]; - win_req_t req; + win_req_t *req = priv_data; memreq_t map; - cistpl_cftable_entry_t dflt = { 0 }; - printk(KERN_INFO "ni_daq_700: cs-config\n"); - - DEBUG(0, "dio700_config(0x%p)\n", link); + if (cfg->index == 0) + return -ENODEV; - /* - This reads the card's CONFIG tuple to find its configuration - registers. - */ - tuple.DesiredTuple = CISTPL_CONFIG; - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - - last_ret = pcmcia_get_first_tuple(link, &tuple); - if (last_ret) { - cs_error(link, GetFirstTuple, last_ret); - goto cs_failed; + /* Does this card need audio output? */ + if (cfg->flags & CISTPL_CFTABLE_AUDIO) { + p_dev->conf.Attributes |= CONF_ENABLE_SPKR; + p_dev->conf.Status = CCSR_AUDIO_ENA; } - last_ret = pcmcia_get_tuple_data(link, &tuple); - if (last_ret) { - cs_error(link, GetTupleData, last_ret); - goto cs_failed; + /* Do we need to allocate an interrupt? */ + if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(io->flags & CISTPL_IO_8BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(io->flags & CISTPL_IO_16BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; + if (io->nwin > 1) { + p_dev->io.Attributes2 = p_dev->io.Attributes1; + p_dev->io.BasePort2 = io->win[1].base; + p_dev->io.NumPorts2 = io->win[1].len; + } + /* This reserves IO space but doesn't actually enable it */ + if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + return -ENODEV; } - last_ret = pcmcia_parse_tuple(&tuple, &parse); - if (last_ret) { - cs_error(link, ParseTuple, last_ret); - goto cs_failed; + if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) { + cistpl_mem_t *mem = + (cfg->mem.nwin) ? &cfg->mem : &dflt->mem; + req->Attributes = WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM; + req->Attributes |= WIN_ENABLE; + req->Base = mem->win[0].host_addr; + req->Size = mem->win[0].len; + if (req->Size < 0x1000) + req->Size = 0x1000; + req->AccessSpeed = 0; + if (pcmcia_request_window(p_dev, req, &p_dev->win)) + return -ENODEV; + map.Page = 0; + map.CardOffset = mem->win[0].card_addr; + if (pcmcia_map_mem_page(p_dev, p_dev->win, &map)) + return -ENODEV; } - link->conf.ConfigBase = parse.config.base; - link->conf.Present = parse.config.rmask[0]; - - /* - In this loop, we scan the CIS for configuration table entries, - each of which describes a valid card configuration, including - voltage, IO window, memory window, and interrupt settings. - - We make no assumptions about the card to be configured: we use - just the information available in the CIS. In an ideal world, - this would work for any PCMCIA card, but it requires a complete - and accurate CIS. In practice, a driver usually "knows" most of - these things without consulting the CIS, and most client drivers - will only use the CIS to fill in implementation-defined details. - */ - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - last_ret = pcmcia_get_first_tuple(link, &tuple); - if (last_ret != 0) { - cs_error(link, GetFirstTuple, last_ret); - goto cs_failed; - } - while (1) { - cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); - if (pcmcia_get_tuple_data(link, &tuple) != 0) - goto next_entry; - if (pcmcia_parse_tuple(&tuple, &parse) != 0) - goto next_entry; - - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) - dflt = *cfg; - if (cfg->index == 0) - goto next_entry; - link->conf.ConfigIndex = cfg->index; - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - } + /* If we got this far, we're cool! */ + return 0; +} - /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) - link->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - link->io.NumPorts1 = link->io.NumPorts2 = 0; - if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - link->io.BasePort1 = io->win[0].base; - link->io.NumPorts1 = io->win[0].len; - if (io->nwin > 1) { - link->io.Attributes2 = link->io.Attributes1; - link->io.BasePort2 = io->win[1].base; - link->io.NumPorts2 = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(link, &link->io) != 0) - goto next_entry; - } +static void dio700_config(struct pcmcia_device *link) +{ + struct local_info_t *dev = link->priv; + win_req_t req; + int ret; - if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) { - cistpl_mem_t *mem = - (cfg->mem.nwin) ? &cfg->mem : &dflt.mem; - req.Attributes = WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM; - req.Attributes |= WIN_ENABLE; - req.Base = mem->win[0].host_addr; - req.Size = mem->win[0].len; - if (req.Size < 0x1000) - req.Size = 0x1000; - req.AccessSpeed = 0; - if (pcmcia_request_window(&link, &req, &link->win)) - goto next_entry; - map.Page = 0; - map.CardOffset = mem->win[0].card_addr; - if (pcmcia_map_mem_page(link->win, &map)) - goto next_entry; - } - /* If we got this far, we're cool! */ - break; + printk(KERN_INFO "ni_daq_700: cs-config\n"); -next_entry: + dev_dbg(&link->dev, "dio700_config\n"); - last_ret = pcmcia_get_next_tuple(link, &tuple); - if (last_ret) { - cs_error(link, GetNextTuple, last_ret); - goto cs_failed; - } + ret = pcmcia_loop_config(link, dio700_pcmcia_config_loop, &req); + if (ret) { + dev_warn(&link->dev, "no configuration found\n"); + goto failed; } /* @@ -719,11 +644,9 @@ next_entry: irq structure is initialized. */ if (link->conf.Attributes & CONF_ENABLE_IRQ) { - last_ret = pcmcia_request_irq(link, &link->irq); - if (last_ret) { - cs_error(link, RequestIRQ, last_ret); - goto cs_failed; - } + ret = pcmcia_request_irq(link, &link->irq); + if (ret) + goto failed; } /* @@ -731,11 +654,9 @@ next_entry: the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ - last_ret = pcmcia_request_configuration(link, &link->conf); - if (last_ret != 0) { - cs_error(link, RequestConfiguration, last_ret); - goto cs_failed; - } + ret = pcmcia_request_configuration(link, &link->conf); + if (ret != 0) + goto failed; /* At this point, the dev_node_t structure(s) need to be @@ -763,7 +684,7 @@ next_entry: return; -cs_failed: +failed: printk(KERN_INFO "ni_daq_700 cs failed"); dio700_release(link); @@ -771,7 +692,7 @@ cs_failed: static void dio700_release(struct pcmcia_device *link) { - DEBUG(0, "dio700_release(0x%p)\n", link); + dev_dbg(&link->dev, "dio700_release\n"); pcmcia_disable_device(link); } /* dio700_release */ @@ -830,15 +751,13 @@ struct pcmcia_driver dio700_cs_driver = { static int __init init_dio700_cs(void) { - printk("ni_daq_700: cs-init \n"); - DEBUG(0, "%s\n", version); pcmcia_register_driver(&dio700_cs_driver); return 0; } static void __exit exit_dio700_cs(void) { - DEBUG(0, "ni_daq_700: unloading\n"); + pr_debug("ni_daq_700: unloading\n"); pcmcia_unregister_driver(&dio700_cs_driver); } diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c index 0700a8bddd1e..9017be3a92f1 100644 --- a/drivers/staging/comedi/drivers/ni_daq_dio24.c +++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c @@ -187,25 +187,7 @@ static int dio24_detach(struct comedi_device *dev) return 0; }; -/* PCMCIA crap */ - -/* - All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If - you do not define PCMCIA_DEBUG at all, all the debug code will be - left out. If you compile with PCMCIA_DEBUG=0, the debug code will - be present but disabled -- but it can then be enabled for specific - modules at load time with a 'pc_debug=#' option to insmod. -*/ -#ifdef PCMCIA_DEBUG -static int pc_debug = PCMCIA_DEBUG; -module_param(pc_debug, int, 0644); -#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args) -static char *version = "ni_daq_dio24.c, based on dummy_cs.c"; -#else -#define DEBUG(n, args...) -#endif - -/*====================================================================*/ +/* PCMCIA crap -- watch your words! */ static void dio24_config(struct pcmcia_device *link); static void dio24_release(struct pcmcia_device *link); @@ -261,7 +243,7 @@ static int dio24_cs_attach(struct pcmcia_device *link) printk(KERN_INFO "ni_daq_dio24: HOLA SOY YO - CS-attach!\n"); - DEBUG(0, "dio24_cs_attach()\n"); + dev_dbg(&link->dev, "dio24_cs_attach()\n"); /* Allocate space for private device-specific data */ local = kzalloc(sizeof(struct local_info_t), GFP_KERNEL); @@ -272,7 +254,6 @@ static int dio24_cs_attach(struct pcmcia_device *link) /* Interrupt setup */ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - link->irq.IRQInfo1 = IRQ_LEVEL_ID; link->irq.Handler = NULL; /* @@ -306,7 +287,7 @@ static void dio24_cs_detach(struct pcmcia_device *link) printk(KERN_INFO "ni_daq_dio24: HOLA SOY YO - cs-detach!\n"); - DEBUG(0, "dio24_cs_detach(0x%p)\n", link); + dev_dbg(&link->dev, "dio24_cs_detach\n"); if (link->dev_node) { ((struct local_info_t *)link->priv)->stop = 1; @@ -327,142 +308,85 @@ static void dio24_cs_detach(struct pcmcia_device *link) ======================================================================*/ -static void dio24_config(struct pcmcia_device *link) +static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) { - struct local_info_t *dev = link->priv; - tuple_t tuple; - cisparse_t parse; - int last_ret; - u_char buf[64]; - win_req_t req; + win_req_t *req = priv_data; memreq_t map; - cistpl_cftable_entry_t dflt = { 0 }; - printk(KERN_INFO "ni_daq_dio24: HOLA SOY YO! - config\n"); - - DEBUG(0, "dio24_config(0x%p)\n", link); - - /* - This reads the card's CONFIG tuple to find its configuration - registers. - */ - tuple.DesiredTuple = CISTPL_CONFIG; - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - - last_ret = pcmcia_get_first_tuple(link, &tuple); - if (last_ret) { - cs_error(link, GetFirstTuple, last_ret); - goto cs_failed; - } + if (cfg->index == 0) + return -ENODEV; - last_ret = pcmcia_get_tuple_data(link, &tuple); - if (last_ret) { - cs_error(link, GetTupleData, last_ret); - goto cs_failed; + /* Does this card need audio output? */ + if (cfg->flags & CISTPL_CFTABLE_AUDIO) { + p_dev->conf.Attributes |= CONF_ENABLE_SPKR; + p_dev->conf.Status = CCSR_AUDIO_ENA; } - last_ret = pcmcia_parse_tuple(&tuple, &parse); - if (last_ret) { - cs_error(link, ParseTuple, last_ret); - goto cs_failed; + /* Do we need to allocate an interrupt? */ + if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(io->flags & CISTPL_IO_8BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(io->flags & CISTPL_IO_16BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; + if (io->nwin > 1) { + p_dev->io.Attributes2 = p_dev->io.Attributes1; + p_dev->io.BasePort2 = io->win[1].base; + p_dev->io.NumPorts2 = io->win[1].len; + } + /* This reserves IO space but doesn't actually enable it */ + if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + return -ENODEV; } - link->conf.ConfigBase = parse.config.base; - link->conf.Present = parse.config.rmask[0]; - - /* - In this loop, we scan the CIS for configuration table entries, - each of which describes a valid card configuration, including - voltage, IO window, memory window, and interrupt settings. - - We make no assumptions about the card to be configured: we use - just the information available in the CIS. In an ideal world, - this would work for any PCMCIA card, but it requires a complete - and accurate CIS. In practice, a driver usually "knows" most of - these things without consulting the CIS, and most client drivers - will only use the CIS to fill in implementation-defined details. - */ - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - last_ret = pcmcia_get_first_tuple(link, &tuple); - if (last_ret) { - cs_error(link, GetFirstTuple, last_ret); - goto cs_failed; + if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) { + cistpl_mem_t *mem = + (cfg->mem.nwin) ? &cfg->mem : &dflt->mem; + req->Attributes = WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM; + req->Attributes |= WIN_ENABLE; + req->Base = mem->win[0].host_addr; + req->Size = mem->win[0].len; + if (req->Size < 0x1000) + req->Size = 0x1000; + req->AccessSpeed = 0; + if (pcmcia_request_window(p_dev, req, &p_dev->win)) + return -ENODEV; + map.Page = 0; + map.CardOffset = mem->win[0].card_addr; + if (pcmcia_map_mem_page(p_dev, p_dev->win, &map)) + return -ENODEV; } - while (1) { - cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); - if (pcmcia_get_tuple_data(link, &tuple) != 0) - goto next_entry; - if (pcmcia_parse_tuple(&tuple, &parse) != 0) - goto next_entry; - - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) - dflt = *cfg; - if (cfg->index == 0) - goto next_entry; - link->conf.ConfigIndex = cfg->index; - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - } + /* If we got this far, we're cool! */ + return 0; +} - /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) - link->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - link->io.NumPorts1 = link->io.NumPorts2 = 0; - if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - link->io.BasePort1 = io->win[0].base; - link->io.NumPorts1 = io->win[0].len; - if (io->nwin > 1) { - link->io.Attributes2 = link->io.Attributes1; - link->io.BasePort2 = io->win[1].base; - link->io.NumPorts2 = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(link, &link->io) != 0) - goto next_entry; - } +static void dio24_config(struct pcmcia_device *link) +{ + struct local_info_t *dev = link->priv; + int ret; + win_req_t req; - if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) { - cistpl_mem_t *mem = - (cfg->mem.nwin) ? &cfg->mem : &dflt.mem; - req.Attributes = WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM; - req.Attributes |= WIN_ENABLE; - req.Base = mem->win[0].host_addr; - req.Size = mem->win[0].len; - if (req.Size < 0x1000) - req.Size = 0x1000; - req.AccessSpeed = 0; - if (pcmcia_request_window(&link, &req, &link->win)) - goto next_entry; - map.Page = 0; - map.CardOffset = mem->win[0].card_addr; - if (pcmcia_map_mem_page(link->win, &map)) - goto next_entry; - } - /* If we got this far, we're cool! */ - break; + printk(KERN_INFO "ni_daq_dio24: HOLA SOY YO! - config\n"); -next_entry: + dev_dbg(&link->dev, "dio24_config\n"); - last_ret = pcmcia_get_next_tuple(link, &tuple); - if (last_ret) { - cs_error(link, GetNextTuple, last_ret); - goto cs_failed; - } + ret = pcmcia_loop_config(link, dio24_pcmcia_config_loop, &req); + if (ret) { + dev_warn(&link->dev, "no configuration found\n"); + goto failed; } /* @@ -471,11 +395,9 @@ next_entry: irq structure is initialized. */ if (link->conf.Attributes & CONF_ENABLE_IRQ) { - last_ret = pcmcia_request_irq(link, &link->irq); - if (last_ret) { - cs_error(link, RequestIRQ, last_ret); - goto cs_failed; - } + ret = pcmcia_request_irq(link, &link->irq); + if (ret) + goto failed; } /* @@ -483,11 +405,9 @@ next_entry: the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ - last_ret = pcmcia_request_configuration(link, &link->conf); - if (last_ret) { - cs_error(link, RequestConfiguration, last_ret); - goto cs_failed; - } + ret = pcmcia_request_configuration(link, &link->conf); + if (ret) + goto failed; /* At this point, the dev_node_t structure(s) need to be @@ -515,7 +435,7 @@ next_entry: return; -cs_failed: +failed: printk(KERN_INFO "Fallo"); dio24_release(link); @@ -523,7 +443,7 @@ cs_failed: static void dio24_release(struct pcmcia_device *link) { - DEBUG(0, "dio24_release(0x%p)\n", link); + dev_dbg(&link->dev, "dio24_release\n"); pcmcia_disable_device(link); } /* dio24_release */ @@ -582,14 +502,12 @@ struct pcmcia_driver dio24_cs_driver = { static int __init init_dio24_cs(void) { printk("ni_daq_dio24: HOLA SOY YO!\n"); - DEBUG(0, "%s\n", version); pcmcia_register_driver(&dio24_cs_driver); return 0; } static void __exit exit_dio24_cs(void) { - DEBUG(0, "ni_dio24: unloading\n"); pcmcia_unregister_driver(&dio24_cs_driver); } diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c index a3053b8da1c6..7d514b3ee754 100644 --- a/drivers/staging/comedi/drivers/ni_labpc_cs.c +++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c @@ -153,23 +153,6 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it) return labpc_common_attach(dev, iobase, irq, 0); } -/* - All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If - you do not define PCMCIA_DEBUG at all, all the debug code will be - left out. If you compile with PCMCIA_DEBUG=0, the debug code will - be present but disabled -- but it can then be enabled for specific - modules at load time with a 'pc_debug=#' option to insmod. -*/ -#ifdef PCMCIA_DEBUG -static int pc_debug = PCMCIA_DEBUG; -module_param(pc_debug, int, 0644); -#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args) -static const char *version = - "ni_labpc.c, based on dummy_cs.c 1.31 2001/08/24 12:13:13"; -#else -#define DEBUG(n, args...) -#endif - /*====================================================================*/ /* @@ -236,7 +219,7 @@ static int labpc_cs_attach(struct pcmcia_device *link) { struct local_info_t *local; - DEBUG(0, "labpc_cs_attach()\n"); + dev_dbg(&link->dev, "labpc_cs_attach()\n"); /* Allocate space for private device-specific data */ local = kzalloc(sizeof(struct local_info_t), GFP_KERNEL); @@ -247,7 +230,6 @@ static int labpc_cs_attach(struct pcmcia_device *link) /* Interrupt setup */ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_FORCED_PULSE; - link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_PULSE_ID; link->irq.Handler = NULL; /* @@ -278,7 +260,7 @@ static int labpc_cs_attach(struct pcmcia_device *link) static void labpc_cs_detach(struct pcmcia_device *link) { - DEBUG(0, "labpc_cs_detach(0x%p)\n", link); + dev_dbg(&link->dev, "labpc_cs_detach\n"); /* If the device is currently configured and active, we won't @@ -305,135 +287,84 @@ static void labpc_cs_detach(struct pcmcia_device *link) ======================================================================*/ -static void labpc_config(struct pcmcia_device *link) +static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) { - struct local_info_t *dev = link->priv; - tuple_t tuple; - cisparse_t parse; - int last_ret; - u_char buf[64]; - win_req_t req; + win_req_t *req = priv_data; memreq_t map; - cistpl_cftable_entry_t dflt = { 0 }; - DEBUG(0, "labpc_config(0x%p)\n", link); + if (cfg->index == 0) + return -ENODEV; - /* - This reads the card's CONFIG tuple to find its configuration - registers. - */ - tuple.DesiredTuple = CISTPL_CONFIG; - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - - last_ret = pcmcia_get_first_tuple(link, &tuple); - if (last_ret) { - cs_error(link, GetFirstTuple, last_ret); - goto cs_failed; + /* Does this card need audio output? */ + if (cfg->flags & CISTPL_CFTABLE_AUDIO) { + p_dev->conf.Attributes |= CONF_ENABLE_SPKR; + p_dev->conf.Status = CCSR_AUDIO_ENA; } - last_ret = pcmcia_get_tuple_data(link, &tuple); - if (last_ret) { - cs_error(link, GetTupleData, last_ret); - goto cs_failed; + /* Do we need to allocate an interrupt? */ + if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(io->flags & CISTPL_IO_8BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(io->flags & CISTPL_IO_16BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; + if (io->nwin > 1) { + p_dev->io.Attributes2 = p_dev->io.Attributes1; + p_dev->io.BasePort2 = io->win[1].base; + p_dev->io.NumPorts2 = io->win[1].len; + } + /* This reserves IO space but doesn't actually enable it */ + if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + return -ENODEV; } - last_ret = pcmcia_parse_tuple(&tuple, &parse); - if (last_ret) { - cs_error(link, ParseTuple, last_ret); - goto cs_failed; + if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) { + cistpl_mem_t *mem = + (cfg->mem.nwin) ? &cfg->mem : &dflt->mem; + req->Attributes = WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM; + req->Attributes |= WIN_ENABLE; + req->Base = mem->win[0].host_addr; + req->Size = mem->win[0].len; + if (req->Size < 0x1000) + req->Size = 0x1000; + req->AccessSpeed = 0; + if (pcmcia_request_window(p_dev, req, &p_dev->win)) + return -ENODEV; + map.Page = 0; + map.CardOffset = mem->win[0].card_addr; + if (pcmcia_map_mem_page(p_dev, p_dev->win, &map)) + return -ENODEV; } - link->conf.ConfigBase = parse.config.base; - link->conf.Present = parse.config.rmask[0]; + /* If we got this far, we're cool! */ + return 0; +} - /* - In this loop, we scan the CIS for configuration table entries, - each of which describes a valid card configuration, including - voltage, IO window, memory window, and interrupt settings. - - We make no assumptions about the card to be configured: we use - just the information available in the CIS. In an ideal world, - this would work for any PCMCIA card, but it requires a complete - and accurate CIS. In practice, a driver usually "knows" most of - these things without consulting the CIS, and most client drivers - will only use the CIS to fill in implementation-defined details. - */ - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - last_ret = pcmcia_get_first_tuple(link, &tuple); - if (last_ret) { - cs_error(link, GetFirstTuple, last_ret); - goto cs_failed; - } - while (1) { - cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); - if (pcmcia_get_tuple_data(link, &tuple)) - goto next_entry; - if (pcmcia_parse_tuple(&tuple, &parse)) - goto next_entry; - - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) - dflt = *cfg; - if (cfg->index == 0) - goto next_entry; - link->conf.ConfigIndex = cfg->index; - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - } - /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) - link->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - link->io.NumPorts1 = link->io.NumPorts2 = 0; - if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - link->io.BasePort1 = io->win[0].base; - link->io.NumPorts1 = io->win[0].len; - if (io->nwin > 1) { - link->io.Attributes2 = link->io.Attributes1; - link->io.BasePort2 = io->win[1].base; - link->io.NumPorts2 = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(link, &link->io)) - goto next_entry; - } +static void labpc_config(struct pcmcia_device *link) +{ + struct local_info_t *dev = link->priv; + int ret; + win_req_t req; - if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) { - cistpl_mem_t *mem = - (cfg->mem.nwin) ? &cfg->mem : &dflt.mem; - req.Attributes = WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM; - req.Attributes |= WIN_ENABLE; - req.Base = mem->win[0].host_addr; - req.Size = mem->win[0].len; - if (req.Size < 0x1000) - req.Size = 0x1000; - req.AccessSpeed = 0; - link->win = (window_handle_t) link; - if (pcmcia_request_window(&link, &req, &link->win)) - goto next_entry; - map.Page = 0; - map.CardOffset = mem->win[0].card_addr; - if (pcmcia_map_mem_page(link->win, &map)) - goto next_entry; - } - /* If we got this far, we're cool! */ - break; + dev_dbg(&link->dev, "labpc_config\n"); -next_entry: - last_ret = pcmcia_get_next_tuple(link, &tuple); - if (last_ret) { - cs_error(link, GetNextTuple, last_ret); - goto cs_failed; - } + ret = pcmcia_loop_config(link, labpc_pcmcia_config_loop, &req); + if (ret) { + dev_warn(&link->dev, "no configuration found\n"); + goto failed; } /* @@ -442,11 +373,9 @@ next_entry: irq structure is initialized. */ if (link->conf.Attributes & CONF_ENABLE_IRQ) { - last_ret = pcmcia_request_irq(link, &link->irq); - if (last_ret) { - cs_error(link, RequestIRQ, last_ret); - goto cs_failed; - } + ret = pcmcia_request_irq(link, &link->irq); + if (ret) + goto failed; } /* @@ -454,11 +383,9 @@ next_entry: the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ - last_ret = pcmcia_request_configuration(link, &link->conf); - if (last_ret) { - cs_error(link, RequestConfiguration, last_ret); - goto cs_failed; - } + ret = pcmcia_request_configuration(link, &link->conf); + if (ret) + goto failed; /* At this point, the dev_node_t structure(s) need to be @@ -486,14 +413,14 @@ next_entry: return; -cs_failed: +failed: labpc_release(link); } /* labpc_config */ static void labpc_release(struct pcmcia_device *link) { - DEBUG(0, "labpc_release(0x%p)\n", link); + dev_dbg(&link->dev, "labpc_release\n"); pcmcia_disable_device(link); } /* labpc_release */ @@ -551,14 +478,12 @@ struct pcmcia_driver labpc_cs_driver = { static int __init init_labpc_cs(void) { - DEBUG(0, "%s\n", version); pcmcia_register_driver(&labpc_cs_driver); return 0; } static void __exit exit_labpc_cs(void) { - DEBUG(0, "ni_labpc: unloading\n"); pcmcia_unregister_driver(&labpc_cs_driver); } diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c index 9aef87fc81dc..d692f4bb47ea 100644 --- a/drivers/staging/comedi/drivers/ni_mio_cs.c +++ b/drivers/staging/comedi/drivers/ni_mio_cs.c @@ -274,7 +274,6 @@ static int cs_attach(struct pcmcia_device *link) link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; link->io.NumPorts1 = 16; link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - link->irq.IRQInfo1 = IRQ_LEVEL_ID; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -312,96 +311,47 @@ static int mio_cs_resume(struct pcmcia_device *link) return 0; } -static void mio_cs_config(struct pcmcia_device *link) -{ - tuple_t tuple; - u_short buf[128]; - cisparse_t parse; - int manfid = 0, prodid = 0; - int ret; - - DPRINTK("mio_cs_config(link=%p)\n", link); - tuple.TupleData = (cisdata_t *) buf; - tuple.TupleOffset = 0; - tuple.TupleDataMax = 255; - tuple.Attributes = 0; +static int mio_pcmcia_config_loop(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + int base, ret; - tuple.DesiredTuple = CISTPL_CONFIG; - ret = pcmcia_get_first_tuple(link, &tuple); - ret = pcmcia_get_tuple_data(link, &tuple); - ret = pcmcia_parse_tuple(&tuple, &parse); - link->conf.ConfigBase = parse.config.base; - link->conf.Present = parse.config.rmask[0]; + p_dev->io.NumPorts1 = cfg->io.win[0].len; + p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK; + p_dev->io.NumPorts2 = 0; -#if 0 - tuple.DesiredTuple = CISTPL_LONGLINK_MFC; - tuple.Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK; - info->multi(first_tuple(link, &tuple, &parse) == 0); -#endif - - tuple.DesiredTuple = CISTPL_MANFID; - tuple.Attributes = TUPLE_RETURN_COMMON; - if ((pcmcia_get_first_tuple(link, &tuple) == 0) && - (pcmcia_get_tuple_data(link, &tuple) == 0)) { - manfid = le16_to_cpu(buf[0]); - prodid = le16_to_cpu(buf[1]); + for (base = 0x000; base < 0x400; base += 0x20) { + p_dev->io.BasePort1 = base; + ret = pcmcia_request_io(p_dev, &p_dev->io); + if (!ret) + return 0; } - /* printk("manfid = 0x%04x, 0x%04x\n",manfid,prodid); */ + return -ENODEV; +} - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - tuple.Attributes = 0; - ret = pcmcia_get_first_tuple(link, &tuple); - ret = pcmcia_get_tuple_data(link, &tuple); - ret = pcmcia_parse_tuple(&tuple, &parse); -#if 0 - printk(" index: 0x%x\n", parse.cftable_entry.index); - printk(" flags: 0x%x\n", parse.cftable_entry.flags); - printk(" io flags: 0x%x\n", parse.cftable_entry.io.flags); - printk(" io nwin: 0x%x\n", parse.cftable_entry.io.nwin); - printk(" io base: 0x%x\n", parse.cftable_entry.io.win[0].base); - printk(" io len: 0x%x\n", parse.cftable_entry.io.win[0].len); - printk(" irq1: 0x%x\n", parse.cftable_entry.irq.IRQInfo1); - printk(" irq2: 0x%x\n", parse.cftable_entry.irq.IRQInfo2); - printk(" mem flags: 0x%x\n", parse.cftable_entry.mem.flags); - printk(" mem nwin: 0x%x\n", parse.cftable_entry.mem.nwin); - printk(" subtuples: 0x%x\n", parse.cftable_entry.subtuples); -#endif +static void mio_cs_config(struct pcmcia_device *link) +{ + int ret; -#if 0 - link->io.NumPorts1 = 0x20; - link->io.IOAddrLines = 5; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; -#endif - link->io.NumPorts1 = parse.cftable_entry.io.win[0].len; - link->io.IOAddrLines = - parse.cftable_entry.io.flags & CISTPL_IO_LINES_MASK; - link->io.NumPorts2 = 0; + DPRINTK("mio_cs_config(link=%p)\n", link); - { - int base; - for (base = 0x000; base < 0x400; base += 0x20) { - link->io.BasePort1 = base; - ret = pcmcia_request_io(link, &link->io); - /* printk("RequestIO 0x%02x\n",ret); */ - if (!ret) - break; - } + ret = pcmcia_loop_config(link, mio_pcmcia_config_loop, NULL); + if (ret) { + dev_warn(&link->dev, "no configuration found\n"); + return; } - link->irq.IRQInfo1 = parse.cftable_entry.irq.IRQInfo1; - link->irq.IRQInfo2 = parse.cftable_entry.irq.IRQInfo2; ret = pcmcia_request_irq(link, &link->irq); if (ret) { printk("pcmcia_request_irq() returned error: %i\n", ret); } - /* printk("RequestIRQ 0x%02x\n",ret); */ - - link->conf.ConfigIndex = 1; ret = pcmcia_request_configuration(link, &link->conf); - /* printk("RequestConfiguration %d\n",ret); */ link->dev_node = &dev_node; } @@ -475,40 +425,17 @@ static int mio_cs_attach(struct comedi_device *dev, struct comedi_devconfig *it) return 0; } -static int get_prodid(struct comedi_device *dev, struct pcmcia_device *link) -{ - tuple_t tuple; - u_short buf[128]; - int prodid = 0; - - tuple.TupleData = (cisdata_t *) buf; - tuple.TupleOffset = 0; - tuple.TupleDataMax = 255; - tuple.DesiredTuple = CISTPL_MANFID; - tuple.Attributes = TUPLE_RETURN_COMMON; - if ((pcmcia_get_first_tuple(link, &tuple) == 0) && - (pcmcia_get_tuple_data(link, &tuple) == 0)) { - prodid = le16_to_cpu(buf[1]); - } - - return prodid; -} - static int ni_getboardtype(struct comedi_device *dev, struct pcmcia_device *link) { - int id; int i; - id = get_prodid(dev, link); - for (i = 0; i < n_ni_boards; i++) { - if (ni_boards[i].device_id == id) { + if (ni_boards[i].device_id == link->card_id) return i; - } } - printk("unknown board 0x%04x -- pretend it is a ", id); + printk("unknown board 0x%04x -- pretend it is a ", link->card_id); return 0; } diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c index 344b82353e08..5256fd933162 100644 --- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c +++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c @@ -55,23 +55,6 @@ Devices: [Quatech] DAQP-208 (daqp), DAQP-308 #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> -/* - All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If - you do not define PCMCIA_DEBUG at all, all the debug code will be - left out. If you compile with PCMCIA_DEBUG=0, the debug code will - be present but disabled -- but it can then be enabled for specific - modules at load time with a 'pc_debug=#' option to insmod. -*/ - -#ifdef PCMCIA_DEBUG -static int pc_debug = PCMCIA_DEBUG; -module_param(pc_debug, int, 0644); -#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args) -static char *version = "quatech_daqp_cs.c 1.10 2003/04/21 (Brent Baccala)"; -#else -#define DEBUG(n, args...) -#endif - /* Maximum number of separate DAQP devices we'll allow */ #define MAX_DEV 4 @@ -863,8 +846,6 @@ static int daqp_attach(struct comedi_device *dev, struct comedi_devconfig *it) { int ret; struct local_info_t *local = dev_table[it->options[0]]; - tuple_t tuple; - int i; struct comedi_subdevice *s; if (it->options[0] < 0 || it->options[0] >= MAX_DEV || !local) { @@ -883,29 +864,10 @@ static int daqp_attach(struct comedi_device *dev, struct comedi_devconfig *it) strcpy(local->board_name, "DAQP"); dev->board_name = local->board_name; - - tuple.DesiredTuple = CISTPL_VERS_1; - if (pcmcia_get_first_tuple(local->link, &tuple) == 0) { - u_char buf[128]; - - buf[0] = buf[sizeof(buf) - 1] = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 2; - if (pcmcia_get_tuple_data(local->link, &tuple) == 0) { - - for (i = 0; i < tuple.TupleDataLen - 4; i++) - if (buf[i] == 0) - break; - for (i++; i < tuple.TupleDataLen - 4; i++) - if (buf[i] == 0) - break; - i++; - if ((i < tuple.TupleDataLen - 4) - && (strncmp(buf + i, "DAQP", 4) == 0)) { - strncpy(local->board_name, buf + i, - sizeof(local->board_name)); - } + if (local->link->prod_id[2]) { + if (strncmp(local->link->prod_id[2], "DAQP", 4) == 0) { + strncpy(local->board_name, local->link->prod_id[2], + sizeof(local->board_name)); } } @@ -1058,7 +1020,7 @@ static int daqp_cs_attach(struct pcmcia_device *link) struct local_info_t *local; int i; - DEBUG(0, "daqp_cs_attach()\n"); + dev_dbg(&link->dev, "daqp_cs_attach()\n"); for (i = 0; i < MAX_DEV; i++) if (dev_table[i] == NULL) @@ -1079,10 +1041,8 @@ static int daqp_cs_attach(struct pcmcia_device *link) link->priv = local; /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; - link->irq.IRQInfo1 = IRQ_LEVEL_ID; + link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; link->irq.Handler = daqp_interrupt; - link->irq.Instance = local; /* General socket configuration defaults can go here. In this @@ -1112,7 +1072,7 @@ static void daqp_cs_detach(struct pcmcia_device *link) { struct local_info_t *dev = link->priv; - DEBUG(0, "daqp_cs_detach(0x%p)\n", link); + dev_dbg(&link->dev, "daqp_cs_detach\n"); if (link->dev_node) { dev->stop = 1; @@ -1134,115 +1094,54 @@ static void daqp_cs_detach(struct pcmcia_device *link) ======================================================================*/ -static void daqp_cs_config(struct pcmcia_device *link) -{ - struct local_info_t *dev = link->priv; - tuple_t tuple; - cisparse_t parse; - int last_ret; - u_char buf[64]; - - DEBUG(0, "daqp_cs_config(0x%p)\n", link); - - /* - This reads the card's CONFIG tuple to find its configuration - registers. - */ - tuple.DesiredTuple = CISTPL_CONFIG; - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - - last_ret = pcmcia_get_first_tuple(link, &tuple); - if (last_ret) { - cs_error(link, GetFirstTuple, last_ret); - goto cs_failed; - } - last_ret = pcmcia_get_tuple_data(link, &tuple); - if (last_ret) { - cs_error(link, GetTupleData, last_ret); - goto cs_failed; - } - - last_ret = pcmcia_parse_tuple(&tuple, &parse); - if (last_ret) { - cs_error(link, ParseTuple, last_ret); - goto cs_failed; - } - link->conf.ConfigBase = parse.config.base; - link->conf.Present = parse.config.rmask[0]; +static int daqp_pcmcia_config_loop(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + if (cfg->index == 0) + return -ENODEV; - /* - In this loop, we scan the CIS for configuration table entries, - each of which describes a valid card configuration, including - voltage, IO window, memory window, and interrupt settings. - - We make no assumptions about the card to be configured: we use - just the information available in the CIS. In an ideal world, - this would work for any PCMCIA card, but it requires a complete - and accurate CIS. In practice, a driver usually "knows" most of - these things without consulting the CIS, and most client drivers - will only use the CIS to fill in implementation-defined details. - */ - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - last_ret = pcmcia_get_first_tuple(link, &tuple); - if (last_ret) { - cs_error(link, GetFirstTuple, last_ret); - goto cs_failed; + /* Do we need to allocate an interrupt? */ + if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(io->flags & CISTPL_IO_8BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(io->flags & CISTPL_IO_16BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; + if (io->nwin > 1) { + p_dev->io.Attributes2 = p_dev->io.Attributes1; + p_dev->io.BasePort2 = io->win[1].base; + p_dev->io.NumPorts2 = io->win[1].len; + } } - while (1) { - cistpl_cftable_entry_t dflt = { 0 }; - cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); - if (pcmcia_get_tuple_data(link, &tuple)) - goto next_entry; - if (pcmcia_parse_tuple(&tuple, &parse)) - goto next_entry; - - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) - dflt = *cfg; - if (cfg->index == 0) - goto next_entry; - link->conf.ConfigIndex = cfg->index; - - /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) - link->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - link->io.NumPorts1 = link->io.NumPorts2 = 0; - if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - link->io.BasePort1 = io->win[0].base; - link->io.NumPorts1 = io->win[0].len; - if (io->nwin > 1) { - link->io.Attributes2 = link->io.Attributes1; - link->io.BasePort2 = io->win[1].base; - link->io.NumPorts2 = io->win[1].len; - } - } + /* This reserves IO space but doesn't actually enable it */ + return pcmcia_request_io(p_dev, &p_dev->io); +} - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(link, &link->io)) - goto next_entry; +static void daqp_cs_config(struct pcmcia_device *link) +{ + struct local_info_t *dev = link->priv; + int ret; - /* If we got this far, we're cool! */ - break; + dev_dbg(&link->dev, "daqp_cs_config\n"); -next_entry: - last_ret = pcmcia_get_next_tuple(link, &tuple); - if (last_ret) { - cs_error(link, GetNextTuple, last_ret); - goto cs_failed; - } + ret = pcmcia_loop_config(link, daqp_pcmcia_config_loop, NULL); + if (ret) { + dev_warn(&link->dev, "no configuration found\n"); + goto failed; } /* @@ -1251,11 +1150,9 @@ next_entry: irq structure is initialized. */ if (link->conf.Attributes & CONF_ENABLE_IRQ) { - last_ret = pcmcia_request_irq(link, &link->irq); - if (last_ret) { - cs_error(link, RequestIRQ, last_ret); - goto cs_failed; - } + ret = pcmcia_request_irq(link, &link->irq); + if (ret) + goto failed; } /* @@ -1263,11 +1160,9 @@ next_entry: the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ - last_ret = pcmcia_request_configuration(link, &link->conf); - if (last_ret) { - cs_error(link, RequestConfiguration, last_ret); - goto cs_failed; - } + ret = pcmcia_request_configuration(link, &link->conf); + if (ret) + goto failed; /* At this point, the dev_node_t structure(s) need to be @@ -1296,14 +1191,14 @@ next_entry: return; -cs_failed: +failed: daqp_cs_release(link); } /* daqp_cs_config */ static void daqp_cs_release(struct pcmcia_device *link) { - DEBUG(0, "daqp_cs_release(0x%p)\n", link); + dev_dbg(&link->dev, "daqp_cs_release\n"); pcmcia_disable_device(link); } /* daqp_cs_release */ @@ -1363,7 +1258,6 @@ struct pcmcia_driver daqp_cs_driver = { int __init init_module(void) { - DEBUG(0, "%s\n", version); pcmcia_register_driver(&daqp_cs_driver); comedi_driver_register(&driver_daqp); return 0; @@ -1371,7 +1265,6 @@ int __init init_module(void) void __exit cleanup_module(void) { - DEBUG(0, "daqp_cs: unloading\n"); comedi_driver_unregister(&driver_daqp); pcmcia_unregister_driver(&daqp_cs_driver); } |