diff options
author | Haavard Skinnemoen <haavard.skinnemoen@atmel.com> | 2009-01-06 14:41:42 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2009-01-06 15:59:19 -0800 |
commit | 5bfa26ca1332780dfeeabafd7f169fc6fb48ba30 (patch) | |
tree | e03fa31c53e5d97077dfd932cb5a62dcc44ef2c4 /drivers/spi | |
parent | d29389de0b0ee1715333bafc6ac3f22a75aa4313 (diff) | |
download | linux-5bfa26ca1332780dfeeabafd7f169fc6fb48ba30.tar.bz2 |
atmel_spi: clean up SPIv1 quirk handling
Currently, we have a flag called "new_1" which is basically equivalent
to cpu_is_at91rm9200(). The latter is also called directly a few places.
Clean up this mess by introducing a atmel_spi_v2() function for
determining the controller version, and move all version dependent code
over to use it. This allows us to remove the new_1 flag.
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/spi')
-rw-r--r-- | drivers/spi/atmel_spi.c | 40 |
1 files changed, 22 insertions, 18 deletions
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index 8abae4ad0fa5..b4f7f1c286e1 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -30,13 +30,6 @@ * The core SPI transfer engine just talks to a register bank to set up * DMA transfers; transfer queue progress is driven by IRQs. The clock * framework provides the base clock, subdivided for each spi_device. - * - * Newer controllers, marked with "new_1" flag, have: - * - CR.LASTXFER - * - SPI_MR.DIV32 may become FDIV or must-be-zero (here: always zero) - * - SPI_SR.TXEMPTY, SPI_SR.NSSR (and corresponding irqs) - * - SPI_CSRx.CSAAT - * - SPI_CSRx.SBCR allows faster clocking */ struct atmel_spi { spinlock_t lock; @@ -45,7 +38,6 @@ struct atmel_spi { int irq; struct clk *clk; struct platform_device *pdev; - unsigned new_1:1; struct spi_device *stay; u8 stopping; @@ -63,6 +55,23 @@ struct atmel_spi { #define INVALID_DMA_ADDRESS 0xffffffff /* + * Version 2 of the SPI controller has + * - CR.LASTXFER + * - SPI_MR.DIV32 may become FDIV or must-be-zero (here: always zero) + * - SPI_SR.TXEMPTY, SPI_SR.NSSR (and corresponding irqs) + * - SPI_CSRx.CSAAT + * - SPI_CSRx.SBCR allows faster clocking + * + * We can determine the controller version by reading the VERSION + * register, but I haven't checked that it exists on all chips, and + * this is cheaper anyway. + */ +static bool atmel_spi_is_v2(void) +{ + return !cpu_is_at91rm9200(); +} + +/* * Earlier SPI controllers (e.g. on at91rm9200) have a design bug whereby * they assume that spi slave device state will not change on deselect, so * that automagic deselection is OK. ("NPCSx rises if no data is to be @@ -105,7 +114,7 @@ static void cs_activate(struct atmel_spi *as, struct spi_device *spi) gpio, active ? " (high)" : "", mr); - if (!(cpu_is_at91rm9200() && spi->chip_select == 0)) + if (atmel_spi_is_v2() || spi->chip_select != 0) gpio_set_value(gpio, active); spi_writel(as, MR, mr); } @@ -129,7 +138,7 @@ static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi) gpio, active ? " (low)" : "", mr); - if (!(cpu_is_at91rm9200() && spi->chip_select == 0)) + if (atmel_spi_is_v2() || spi->chip_select != 0) gpio_set_value(gpio, !active); } @@ -536,19 +545,16 @@ static int atmel_spi_setup(struct spi_device *spi) } /* see notes above re chipselect */ - if (cpu_is_at91rm9200() + if (!atmel_spi_is_v2() && spi->chip_select == 0 && (spi->mode & SPI_CS_HIGH)) { dev_dbg(&spi->dev, "setup: can't be active-high\n"); return -EINVAL; } - /* - * Pre-new_1 chips start out at half the peripheral - * bus speed. - */ + /* v1 chips start out at half the peripheral bus speed. */ bus_hz = clk_get_rate(as->clk); - if (!as->new_1) + if (!atmel_spi_is_v2()) bus_hz /= 2; if (spi->max_speed_hz) { @@ -755,8 +761,6 @@ static int __init atmel_spi_probe(struct platform_device *pdev) goto out_free_buffer; as->irq = irq; as->clk = clk; - if (!cpu_is_at91rm9200()) - as->new_1 = 1; ret = request_irq(irq, atmel_spi_interrupt, 0, pdev->dev.bus_id, master); |