diff options
| author | Geert Uytterhoeven <geert+renesas@glider.be> | 2018-05-23 11:02:04 +0200 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2018-05-24 15:15:39 +0100 |
| commit | 0921e11e1e12802ae0a3c19cb02e33354ca51967 (patch) | |
| tree | 0532b6b2e20aa022f1341675d8fcc268e06bb7a5 /drivers/spi | |
| parent | bc519d9574618e47a0c788000fb78da95e18d953 (diff) | |
| download | linux-0921e11e1e12802ae0a3c19cb02e33354ca51967.tar.bz2 | |
spi: sh-msiof: Fix setting SIRMDR1.SYNCAC to match SITMDR1.SYNCAC
According to section 59.2.4 MSIOF Receive Mode Register 1 (SIRMDR1) in
the R-Car Gen3 datasheet Rev.1.00, the value of the SIRMDR1.SYNCAC bit
must match the value of the SITMDR1.SYNCAC bit. However,
sh_msiof_spi_setup() changes only the latter.
Fix this by updating the SIRMDR1 register like the SITMDR1 register,
taking into account register bits that exist in SITMDR1 only.
Reported-by: Renesas BSP team via Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Fixes: 7ff0b53c4051145d ("spi: sh-msiof: Avoid writing to registers from spi_master.setup()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/spi')
| -rw-r--r-- | drivers/spi/spi-sh-msiof.c | 6 |
1 files changed, 4 insertions, 2 deletions
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index 8171eedbfc90..c75641b9df79 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -564,14 +564,16 @@ static int sh_msiof_spi_setup(struct spi_device *spi) /* Configure native chip select mode/polarity early */ clr = MDR1_SYNCMD_MASK; - set = MDR1_TRMD | TMDR1_PCON | MDR1_SYNCMD_SPI; + set = MDR1_SYNCMD_SPI; if (spi->mode & SPI_CS_HIGH) clr |= BIT(MDR1_SYNCAC_SHIFT); else set |= BIT(MDR1_SYNCAC_SHIFT); pm_runtime_get_sync(&p->pdev->dev); tmp = sh_msiof_read(p, TMDR1) & ~clr; - sh_msiof_write(p, TMDR1, tmp | set); + sh_msiof_write(p, TMDR1, tmp | set | MDR1_TRMD | TMDR1_PCON); + tmp = sh_msiof_read(p, RMDR1) & ~clr; + sh_msiof_write(p, RMDR1, tmp | set); pm_runtime_put(&p->pdev->dev); p->native_cs_high = spi->mode & SPI_CS_HIGH; p->native_cs_inited = true; |