diff options
author | Yash Shah <yash.shah@sifive.com> | 2019-02-19 17:10:07 +0530 |
---|---|---|
committer | Mark Brown <broonie@kernel.org> | 2019-02-19 15:28:53 +0000 |
commit | 484a9a68d669f899657a97dbb369cb3e3be7e7f5 (patch) | |
tree | 0b88bce0cee2cac0c0d28144e82b2a6b574edc35 /drivers/spi/spi-sifive.c | |
parent | 3b155e873a38c3b28e419da759cfe86c74b1c870 (diff) | |
download | linux-484a9a68d669f899657a97dbb369cb3e3be7e7f5.tar.bz2 |
spi: sifive: Add driver for the SiFive SPI controller
Add driver for the SiFive SPI controller
on the HiFive Unleashed board.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/spi/spi-sifive.c')
-rw-r--r-- | drivers/spi/spi-sifive.c | 450 |
1 files changed, 450 insertions, 0 deletions
diff --git a/drivers/spi/spi-sifive.c b/drivers/spi/spi-sifive.c new file mode 100644 index 000000000000..961307c4a613 --- /dev/null +++ b/drivers/spi/spi-sifive.c @@ -0,0 +1,450 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2018 SiFive, Inc. +// +// SiFive SPI controller driver (master mode only) +// +// Author: SiFive, Inc. +// sifive@sifive.com + +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/io.h> +#include <linux/log2.h> + +#define SIFIVE_SPI_DRIVER_NAME "sifive_spi" + +#define SIFIVE_SPI_MAX_CS 32 +#define SIFIVE_SPI_DEFAULT_DEPTH 8 +#define SIFIVE_SPI_DEFAULT_MAX_BITS 8 + +/* register offsets */ +#define SIFIVE_SPI_REG_SCKDIV 0x00 /* Serial clock divisor */ +#define SIFIVE_SPI_REG_SCKMODE 0x04 /* Serial clock mode */ +#define SIFIVE_SPI_REG_CSID 0x10 /* Chip select ID */ +#define SIFIVE_SPI_REG_CSDEF 0x14 /* Chip select default */ +#define SIFIVE_SPI_REG_CSMODE 0x18 /* Chip select mode */ +#define SIFIVE_SPI_REG_DELAY0 0x28 /* Delay control 0 */ +#define SIFIVE_SPI_REG_DELAY1 0x2c /* Delay control 1 */ +#define SIFIVE_SPI_REG_FMT 0x40 /* Frame format */ +#define SIFIVE_SPI_REG_TXDATA 0x48 /* Tx FIFO data */ +#define SIFIVE_SPI_REG_RXDATA 0x4c /* Rx FIFO data */ +#define SIFIVE_SPI_REG_TXMARK 0x50 /* Tx FIFO watermark */ +#define SIFIVE_SPI_REG_RXMARK 0x54 /* Rx FIFO watermark */ +#define SIFIVE_SPI_REG_FCTRL 0x60 /* SPI flash interface control */ +#define SIFIVE_SPI_REG_FFMT 0x64 /* SPI flash instruction format */ +#define SIFIVE_SPI_REG_IE 0x70 /* Interrupt Enable Register */ +#define SIFIVE_SPI_REG_IP 0x74 /* Interrupt Pendings Register */ + +/* sckdiv bits */ +#define SIFIVE_SPI_SCKDIV_DIV_MASK 0xfffU + +/* sckmode bits */ +#define SIFIVE_SPI_SCKMODE_PHA BIT(0) +#define SIFIVE_SPI_SCKMODE_POL BIT(1) +#define SIFIVE_SPI_SCKMODE_MODE_MASK (SIFIVE_SPI_SCKMODE_PHA | \ + SIFIVE_SPI_SCKMODE_POL) + +/* csmode bits */ +#define SIFIVE_SPI_CSMODE_MODE_AUTO 0U +#define SIFIVE_SPI_CSMODE_MODE_HOLD 2U +#define SIFIVE_SPI_CSMODE_MODE_OFF 3U + +/* delay0 bits */ +#define SIFIVE_SPI_DELAY0_CSSCK(x) ((u32)(x)) +#define SIFIVE_SPI_DELAY0_CSSCK_MASK 0xffU +#define SIFIVE_SPI_DELAY0_SCKCS(x) ((u32)(x) << 16) +#define SIFIVE_SPI_DELAY0_SCKCS_MASK (0xffU << 16) + +/* delay1 bits */ +#define SIFIVE_SPI_DELAY1_INTERCS(x) ((u32)(x)) +#define SIFIVE_SPI_DELAY1_INTERCS_MASK 0xffU +#define SIFIVE_SPI_DELAY1_INTERXFR(x) ((u32)(x) << 16) +#define SIFIVE_SPI_DELAY1_INTERXFR_MASK (0xffU << 16) + +/* fmt bits */ +#define SIFIVE_SPI_FMT_PROTO_SINGLE 0U +#define SIFIVE_SPI_FMT_PROTO_DUAL 1U +#define SIFIVE_SPI_FMT_PROTO_QUAD 2U +#define SIFIVE_SPI_FMT_PROTO_MASK 3U +#define SIFIVE_SPI_FMT_ENDIAN BIT(2) +#define SIFIVE_SPI_FMT_DIR BIT(3) +#define SIFIVE_SPI_FMT_LEN(x) ((u32)(x) << 16) +#define SIFIVE_SPI_FMT_LEN_MASK (0xfU << 16) + +/* txdata bits */ +#define SIFIVE_SPI_TXDATA_DATA_MASK 0xffU +#define SIFIVE_SPI_TXDATA_FULL BIT(31) + +/* rxdata bits */ +#define SIFIVE_SPI_RXDATA_DATA_MASK 0xffU +#define SIFIVE_SPI_RXDATA_EMPTY BIT(31) + +/* ie and ip bits */ +#define SIFIVE_SPI_IP_TXWM BIT(0) +#define SIFIVE_SPI_IP_RXWM BIT(1) + +struct sifive_spi { + void __iomem *regs; /* virt. address of control registers */ + struct clk *clk; /* bus clock */ + unsigned int fifo_depth; /* fifo depth in words */ + u32 cs_inactive; /* level of the CS pins when inactive */ + struct completion done; /* wake-up from interrupt */ +}; + +static void sifive_spi_write(struct sifive_spi *spi, int offset, u32 value) +{ + iowrite32(value, spi->regs + offset); +} + +static u32 sifive_spi_read(struct sifive_spi *spi, int offset) +{ + return ioread32(spi->regs + offset); +} + +static void sifive_spi_init(struct sifive_spi *spi) +{ + /* Watermark interrupts are disabled by default */ + sifive_spi_write(spi, SIFIVE_SPI_REG_IE, 0); + + /* Default watermark FIFO threshold values */ + sifive_spi_write(spi, SIFIVE_SPI_REG_TXMARK, 1); + sifive_spi_write(spi, SIFIVE_SPI_REG_RXMARK, 0); + + /* Set CS/SCK Delays and Inactive Time to defaults */ + sifive_spi_write(spi, SIFIVE_SPI_REG_DELAY0, + SIFIVE_SPI_DELAY0_CSSCK(1) | + SIFIVE_SPI_DELAY0_SCKCS(1)); + sifive_spi_write(spi, SIFIVE_SPI_REG_DELAY1, + SIFIVE_SPI_DELAY1_INTERCS(1) | + SIFIVE_SPI_DELAY1_INTERXFR(0)); + + /* Exit specialized memory-mapped SPI flash mode */ + sifive_spi_write(spi, SIFIVE_SPI_REG_FCTRL, 0); +} + +static int +sifive_spi_prepare_message(struct spi_master *master, struct spi_message *msg) +{ + struct sifive_spi *spi = spi_master_get_devdata(master); + struct spi_device *device = msg->spi; + + /* Update the chip select polarity */ + if (device->mode & SPI_CS_HIGH) + spi->cs_inactive &= ~BIT(device->chip_select); + else + spi->cs_inactive |= BIT(device->chip_select); + sifive_spi_write(spi, SIFIVE_SPI_REG_CSDEF, spi->cs_inactive); + + /* Select the correct device */ + sifive_spi_write(spi, SIFIVE_SPI_REG_CSID, device->chip_select); + + /* Set clock mode */ + sifive_spi_write(spi, SIFIVE_SPI_REG_SCKMODE, + device->mode & SIFIVE_SPI_SCKMODE_MODE_MASK); + + return 0; +} + +static void sifive_spi_set_cs(struct spi_device *device, bool is_high) +{ + struct sifive_spi *spi = spi_master_get_devdata(device->master); + + /* Reverse polarity is handled by SCMR/CPOL. Not inverted CS. */ + if (device->mode & SPI_CS_HIGH) + is_high = !is_high; + + sifive_spi_write(spi, SIFIVE_SPI_REG_CSMODE, is_high ? + SIFIVE_SPI_CSMODE_MODE_AUTO : + SIFIVE_SPI_CSMODE_MODE_HOLD); +} + +static int +sifive_spi_prep_transfer(struct sifive_spi *spi, struct spi_device *device, + struct spi_transfer *t) +{ + u32 cr; + unsigned int mode; + + /* Calculate and program the clock rate */ + cr = DIV_ROUND_UP(clk_get_rate(spi->clk) >> 1, t->speed_hz) - 1; + cr &= SIFIVE_SPI_SCKDIV_DIV_MASK; + sifive_spi_write(spi, SIFIVE_SPI_REG_SCKDIV, cr); + + mode = max_t(unsigned int, t->rx_nbits, t->tx_nbits); + + /* Set frame format */ + cr = SIFIVE_SPI_FMT_LEN(t->bits_per_word); + switch (mode) { + case SPI_NBITS_QUAD: + cr |= SIFIVE_SPI_FMT_PROTO_QUAD; + break; + case SPI_NBITS_DUAL: + cr |= SIFIVE_SPI_FMT_PROTO_DUAL; + break; + default: + cr |= SIFIVE_SPI_FMT_PROTO_SINGLE; + break; + } + if (device->mode & SPI_LSB_FIRST) + cr |= SIFIVE_SPI_FMT_ENDIAN; + if (!t->rx_buf) + cr |= SIFIVE_SPI_FMT_DIR; + sifive_spi_write(spi, SIFIVE_SPI_REG_FMT, cr); + + /* We will want to poll if the time we need to wait is + * less than the context switching time. + * Let's call that threshold 5us. The operation will take: + * (8/mode) * fifo_depth / hz <= 5 * 10^-6 + * 1600000 * fifo_depth <= hz * mode + */ + return 1600000 * spi->fifo_depth <= t->speed_hz * mode; +} + +static irqreturn_t sifive_spi_irq(int irq, void *dev_id) +{ + struct sifive_spi *spi = dev_id; + u32 ip = sifive_spi_read(spi, SIFIVE_SPI_REG_IP); + + if (ip & (SIFIVE_SPI_IP_TXWM | SIFIVE_SPI_IP_RXWM)) { + /* Disable interrupts until next transfer */ + sifive_spi_write(spi, SIFIVE_SPI_REG_IE, 0); + complete(&spi->done); + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +static void sifive_spi_wait(struct sifive_spi *spi, u32 bit, int poll) +{ + if (poll) { + u32 cr; + + do { + cr = sifive_spi_read(spi, SIFIVE_SPI_REG_IP); + } while (!(cr & bit)); + } else { + reinit_completion(&spi->done); + sifive_spi_write(spi, SIFIVE_SPI_REG_IE, bit); + wait_for_completion(&spi->done); + } +} + +static void sifive_spi_tx(struct sifive_spi *spi, const u8 *tx_ptr) +{ + WARN_ON_ONCE((sifive_spi_read(spi, SIFIVE_SPI_REG_TXDATA) + & SIFIVE_SPI_TXDATA_FULL) != 0); + sifive_spi_write(spi, SIFIVE_SPI_REG_TXDATA, + *tx_ptr & SIFIVE_SPI_TXDATA_DATA_MASK); +} + +static void sifive_spi_rx(struct sifive_spi *spi, u8 *rx_ptr) +{ + u32 data = sifive_spi_read(spi, SIFIVE_SPI_REG_RXDATA); + + WARN_ON_ONCE((data & SIFIVE_SPI_RXDATA_EMPTY) != 0); + *rx_ptr = data & SIFIVE_SPI_RXDATA_DATA_MASK; +} + +static int +sifive_spi_transfer_one(struct spi_master *master, struct spi_device *device, + struct spi_transfer *t) +{ + struct sifive_spi *spi = spi_master_get_devdata(master); + int poll = sifive_spi_prep_transfer(spi, device, t); + const u8 *tx_ptr = t->tx_buf; + u8 *rx_ptr = t->rx_buf; + unsigned int remaining_words = t->len; + + while (remaining_words) { + unsigned int n_words = min(remaining_words, spi->fifo_depth); + unsigned int i; + + /* Enqueue n_words for transmission */ + for (i = 0; i < n_words; i++) + sifive_spi_tx(spi, tx_ptr++); + + if (rx_ptr) { + /* Wait for transmission + reception to complete */ + sifive_spi_write(spi, SIFIVE_SPI_REG_RXMARK, + n_words - 1); + sifive_spi_wait(spi, SIFIVE_SPI_IP_RXWM, poll); + + /* Read out all the data from the RX FIFO */ + for (i = 0; i < n_words; i++) + sifive_spi_rx(spi, rx_ptr++); + } else { + /* Wait for transmission to complete */ + sifive_spi_wait(spi, SIFIVE_SPI_IP_TXWM, poll); + } + + remaining_words -= n_words; + } + + return 0; +} + +static int sifive_spi_probe(struct platform_device *pdev) +{ + struct sifive_spi *spi; + struct resource *res; + int ret, irq, num_cs; + u32 cs_bits, max_bits_per_word; + struct spi_master *master; + + master = spi_alloc_master(&pdev->dev, sizeof(struct sifive_spi)); + if (!master) { + dev_err(&pdev->dev, "out of memory\n"); + return -ENOMEM; + } + + spi = spi_master_get_devdata(master); + init_completion(&spi->done); + platform_set_drvdata(pdev, master); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + spi->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(spi->regs)) { + dev_err(&pdev->dev, "Unable to map IO resources\n"); + ret = PTR_ERR(spi->regs); + goto put_master; + } + + spi->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(spi->clk)) { + dev_err(&pdev->dev, "Unable to find bus clock\n"); + ret = PTR_ERR(spi->clk); + goto put_master; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "Unable to find interrupt\n"); + ret = irq; + goto put_master; + } + + /* Optional parameters */ + ret = + of_property_read_u32(pdev->dev.of_node, "sifive,fifo-depth", + &spi->fifo_depth); + if (ret < 0) + spi->fifo_depth = SIFIVE_SPI_DEFAULT_DEPTH; + + ret = + of_property_read_u32(pdev->dev.of_node, "sifive,max-bits-per-word", + &max_bits_per_word); + + if (!ret && max_bits_per_word < 8) { + dev_err(&pdev->dev, "Only 8bit SPI words supported by the driver\n"); + ret = -EINVAL; + goto put_master; + } + + /* Spin up the bus clock before hitting registers */ + ret = clk_prepare_enable(spi->clk); + if (ret) { + dev_err(&pdev->dev, "Unable to enable bus clock\n"); + goto put_master; + } + + /* probe the number of CS lines */ + spi->cs_inactive = sifive_spi_read(spi, SIFIVE_SPI_REG_CSDEF); + sifive_spi_write(spi, SIFIVE_SPI_REG_CSDEF, 0xffffffffU); + cs_bits = sifive_spi_read(spi, SIFIVE_SPI_REG_CSDEF); + sifive_spi_write(spi, SIFIVE_SPI_REG_CSDEF, spi->cs_inactive); + if (!cs_bits) { + dev_err(&pdev->dev, "Could not auto probe CS lines\n"); + ret = -EINVAL; + goto put_master; + } + + num_cs = ilog2(cs_bits) + 1; + if (num_cs > SIFIVE_SPI_MAX_CS) { + dev_err(&pdev->dev, "Invalid number of spi slaves\n"); + ret = -EINVAL; + goto put_master; + } + + /* Define our master */ + master->dev.of_node = pdev->dev.of_node; + master->bus_num = pdev->id; + master->num_chipselect = num_cs; + master->mode_bits = SPI_CPHA | SPI_CPOL + | SPI_CS_HIGH | SPI_LSB_FIRST + | SPI_TX_DUAL | SPI_TX_QUAD + | SPI_RX_DUAL | SPI_RX_QUAD; + /* TODO: add driver support for bits_per_word < 8 + * we need to "left-align" the bits (unless SPI_LSB_FIRST) + */ + master->bits_per_word_mask = SPI_BPW_MASK(8); + master->flags = SPI_CONTROLLER_MUST_TX | SPI_MASTER_GPIO_SS; + master->prepare_message = sifive_spi_prepare_message; + master->set_cs = sifive_spi_set_cs; + master->transfer_one = sifive_spi_transfer_one; + + pdev->dev.dma_mask = NULL; + /* Configure the SPI master hardware */ + sifive_spi_init(spi); + + /* Register for SPI Interrupt */ + ret = devm_request_irq(&pdev->dev, irq, sifive_spi_irq, 0, + dev_name(&pdev->dev), spi); + if (ret) { + dev_err(&pdev->dev, "Unable to bind to interrupt\n"); + goto put_master; + } + + dev_info(&pdev->dev, "mapped; irq=%d, cs=%d\n", + irq, master->num_chipselect); + + ret = devm_spi_register_master(&pdev->dev, master); + if (ret < 0) { + dev_err(&pdev->dev, "spi_register_master failed\n"); + goto put_master; + } + + return 0; + +put_master: + spi_master_put(master); + + return ret; +} + +static int sifive_spi_remove(struct platform_device *pdev) +{ + struct spi_master *master = platform_get_drvdata(pdev); + struct sifive_spi *spi = spi_master_get_devdata(master); + + /* Disable all the interrupts just in case */ + sifive_spi_write(spi, SIFIVE_SPI_REG_IE, 0); + spi_master_put(master); + + return 0; +} + +static const struct of_device_id sifive_spi_of_match[] = { + { .compatible = "sifive,spi0", }, + {} +}; +MODULE_DEVICE_TABLE(of, sifive_spi_of_match); + +static struct platform_driver sifive_spi_driver = { + .probe = sifive_spi_probe, + .remove = sifive_spi_remove, + .driver = { + .name = SIFIVE_SPI_DRIVER_NAME, + .of_match_table = sifive_spi_of_match, + }, +}; +module_platform_driver(sifive_spi_driver); + +MODULE_AUTHOR("SiFive, Inc. <sifive@sifive.com>"); +MODULE_DESCRIPTION("SiFive SPI driver"); +MODULE_LICENSE("GPL"); |