summaryrefslogtreecommitdiffstats
path: root/drivers/soc
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2021-01-28 13:52:45 +0100
committerArnd Bergmann <arnd@arndb.de>2021-01-28 13:52:47 +0100
commit2a3e487a3e538b3a87d0a4ea71f185437c38e55e (patch)
tree94e83d6bb551179b8c984b4167eb5afdb77f4a6b /drivers/soc
parent082153866e6600e37a98d6fa21fbc347fa22f6a1 (diff)
parent177d8f1f7f47fe7c18ceb1d87893890d7e9c95a7 (diff)
downloadlinux-2a3e487a3e538b3a87d0a4ea71f185437c38e55e.tar.bz2
Merge tag 'omap-for-v5.11/fixes-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.11-rc cycle The recent changes to switch SoCs to boot with ti-sysc interconnect target module driver and genpd caused few regressions: - The omap_prm reset driver needs to clear any reset bits deasserted by the bootloader or kexec boot for the three reset bit cases. Otherwise we can have an oops with accelerators starting to boot with potentially unconfigured MMU for example - Custom kernel configs are not automatically selecting simple-pm-bus driver that we now need to probe interconnects so we need to select it always - We are not passing legacy platform data in auxdata with simple-pm-bus like we do for simple-bus. We need to pass auxdata to simple-pm-bus so it can pass it to of_platform_populate() Then recent RCU changes started causing splats for cpuidle44xx that now need RCU_NONIDLE added to the calls in several places And then we have few device specific fixes: - We need to remove legacy spi-cs-hig for gta04 display to work, and set the gpio to active low - Omap1 specific ohci-omap needs to call gpio_free() - Droid4 needs to use padconf interrupt for the slider as the edge gpio interrupts may be lost for deeper idle states * tag 'omap-for-v5.11/fixes-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap4-droid4: Fix lost keypad slide interrupts for droid4 drivers: bus: simple-pm-bus: Fix compatibility with simple-bus for auxdata ARM: OMAP2+: Fix booting for am335x after moving to simple-pm-bus ARM: OMAP2+: Fix suspcious RCU usage splats for omap_enter_idle_coupled ARM: dts; gta04: SPI panel chip select is active low soc: ti: omap-prm: Fix boot time errors for rst_map_012 bits 0 and 1 ARM: OMAP1: OSK: fix ohci-omap breakage DTS: ARM: gta04: remove legacy spi-cs-high to make display work again Link: https://lore.kernel.org/r/pull-1611818709-243493@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'drivers/soc')
-rw-r--r--drivers/soc/ti/omap_prm.c11
1 files changed, 11 insertions, 0 deletions
diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c
index 77f0051358f1..bf1468e5bccb 100644
--- a/drivers/soc/ti/omap_prm.c
+++ b/drivers/soc/ti/omap_prm.c
@@ -860,6 +860,7 @@ static int omap_prm_reset_init(struct platform_device *pdev,
const struct omap_rst_map *map;
struct ti_prm_platform_data *pdata = dev_get_platdata(&pdev->dev);
char buf[32];
+ u32 v;
/*
* Check if we have controllable resets. If either rstctrl is non-zero
@@ -907,6 +908,16 @@ static int omap_prm_reset_init(struct platform_device *pdev,
map++;
}
+ /* Quirk handling to assert rst_map_012 bits on reset and avoid errors */
+ if (prm->data->rstmap == rst_map_012) {
+ v = readl_relaxed(reset->prm->base + reset->prm->data->rstctrl);
+ if ((v & reset->mask) != reset->mask) {
+ dev_dbg(&pdev->dev, "Asserting all resets: %08x\n", v);
+ writel_relaxed(reset->mask, reset->prm->base +
+ reset->prm->data->rstctrl);
+ }
+ }
+
return devm_reset_controller_register(&pdev->dev, &reset->rcdev);
}