diff options
| author | Keerthy <j-keerthy@ti.com> | 2019-04-03 10:27:42 +0530 |
|---|---|---|
| committer | Tony Lindgren <tony@atomide.com> | 2019-04-08 10:39:01 -0700 |
| commit | 5a99ae0092fe24fd581fdb6b9c2b48f94f92cf32 (patch) | |
| tree | a944d2b28f56550f5af773a48bef676670ce11fe /drivers/soc/ti/Kconfig | |
| parent | 1c6c03545089ef13a5dd6ef85900765be64aea49 (diff) | |
| download | linux-5a99ae0092fe24fd581fdb6b9c2b48f94f92cf32.tar.bz2 | |
soc: ti: pm33xx: AM437X: Add rtc_only with ddr in self-refresh support
During RTC-only suspend, power is lost to the wkup domain, so we need to
save and restore the state of that domain. We also need to store some
information within the RTC registers so that u-boot can do the right thing
at powerup.
The state is entered by getting the RTC to bring the pmic_power_en line low
which will instruct the PMIC to disable the appropriate power rails after
putting DDR into self-refresh mode. To bring pmic_power_en low, we need to
get an ALARM2 event. Since we are running from SRAM at that point, it means
calculating what the next second is (via ASM) and programming that into the
RTC. This patch also adds support for wake up source detection.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'drivers/soc/ti/Kconfig')
| -rw-r--r-- | drivers/soc/ti/Kconfig | 5 |
1 files changed, 3 insertions, 2 deletions
diff --git a/drivers/soc/ti/Kconfig b/drivers/soc/ti/Kconfig index be4570baad96..57960e92ebe0 100644 --- a/drivers/soc/ti/Kconfig +++ b/drivers/soc/ti/Kconfig @@ -45,11 +45,12 @@ config KEYSTONE_NAVIGATOR_DMA config AMX3_PM tristate "AMx3 Power Management" depends on SOC_AM33XX || SOC_AM43XX - depends on WKUP_M3_IPC && TI_EMIF_SRAM && SRAM + depends on WKUP_M3_IPC && TI_EMIF_SRAM && SRAM && RTC_DRV_OMAP help Enable power management on AM335x and AM437x. Required for suspend to mem and standby states on both AM335x and AM437x platforms and for deeper cpuidle - c-states on AM335x. + c-states on AM335x. Also required for rtc and ddr in self-refresh low + power mode on AM437x platforms. config WKUP_M3_IPC tristate "TI AMx3 Wkup-M3 IPC Driver" |