summaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
authorJamie Iles <jamie@jamieiles.com>2010-12-01 23:39:36 +0000
committerGreg Kroah-Hartman <gregkh@suse.de>2010-12-10 15:19:38 -0800
commita3ae0fc34f58e7163b7724feb3d77aa4603f0dc3 (patch)
tree05c435ba0ee0b071e3c45bcef33eac9f1fd37e80 /drivers/serial
parent49d5741be27aa90301b89bf254972b355ed9c8ee (diff)
downloadlinux-a3ae0fc34f58e7163b7724feb3d77aa4603f0dc3.tar.bz2
8250: add a UPIO_DWAPB32 for 32 bit accesses
Some platforms contain a Synopsys DesignWare APB UART that is attached to a 32-bit APB bus where sub-word accesses are not allowed. Add a new IO type (UPIO_DWAPB32) that performs 32 bit acccesses to the UART. v2: - don't test for 32 bit in the output fast path, provide a separate dwabp32_serial_out() function. Refactor dwabp_serial_out() so that we can reuse the LCR saving code. v3: - rebased on top of "8250: use container_of() instead of casting" Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/8250.c51
-rw-r--r--drivers/serial/serial_core.c2
2 files changed, 41 insertions, 12 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 0b4ce47d9871..9839199c1d1d 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -454,22 +454,40 @@ static void tsi_serial_out(struct uart_port *p, int offset, int value)
writeb(value, p->membase + offset);
}
+/* Save the LCR value so it can be re-written when a Busy Detect IRQ occurs. */
+static inline void dwapb_save_out_value(struct uart_port *p, int offset,
+ int value)
+{
+ struct uart_8250_port *up =
+ container_of(p, struct uart_8250_port, port);
+
+ if (offset == UART_LCR)
+ up->lcr = value;
+}
+
+/* Read the IER to ensure any interrupt is cleared before returning from ISR. */
+static inline void dwapb_check_clear_ier(struct uart_port *p, int offset)
+{
+ if (offset == UART_TX || offset == UART_IER)
+ p->serial_in(p, UART_IER);
+}
+
static void dwapb_serial_out(struct uart_port *p, int offset, int value)
{
int save_offset = offset;
offset = map_8250_out_reg(p, offset) << p->regshift;
- /* Save the LCR value so it can be re-written when a
- * Busy Detect interrupt occurs. */
- if (save_offset == UART_LCR) {
- struct uart_8250_port *up =
- container_of(p, struct uart_8250_port, port);
- up->lcr = value;
- }
+ dwapb_save_out_value(p, save_offset, value);
writeb(value, p->membase + offset);
- /* Read the IER to ensure any interrupt is cleared before
- * returning from ISR. */
- if (save_offset == UART_TX || save_offset == UART_IER)
- value = p->serial_in(p, UART_IER);
+ dwapb_check_clear_ier(p, save_offset);
+}
+
+static void dwapb32_serial_out(struct uart_port *p, int offset, int value)
+{
+ int save_offset = offset;
+ offset = map_8250_out_reg(p, offset) << p->regshift;
+ dwapb_save_out_value(p, save_offset, value);
+ writel(value, p->membase + offset);
+ dwapb_check_clear_ier(p, save_offset);
}
static unsigned int io_serial_in(struct uart_port *p, int offset)
@@ -520,6 +538,11 @@ static void set_io_from_upio(struct uart_port *p)
p->serial_out = dwapb_serial_out;
break;
+ case UPIO_DWAPB32:
+ p->serial_in = mem32_serial_in;
+ p->serial_out = dwapb32_serial_out;
+ break;
+
default:
p->serial_in = io_serial_in;
p->serial_out = io_serial_out;
@@ -538,6 +561,7 @@ serial_out_sync(struct uart_8250_port *up, int offset, int value)
case UPIO_MEM32:
case UPIO_AU:
case UPIO_DWAPB:
+ case UPIO_DWAPB32:
p->serial_out(p, offset, value);
p->serial_in(p, UART_LCR); /* safe, no side-effects */
break;
@@ -1587,7 +1611,8 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
handled = 1;
end = NULL;
- } else if (up->port.iotype == UPIO_DWAPB &&
+ } else if ((up->port.iotype == UPIO_DWAPB ||
+ up->port.iotype == UPIO_DWAPB32) &&
(iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
/* The DesignWare APB UART has an Busy Detect (0x07)
* interrupt meaning an LCR write attempt occured while the
@@ -2492,6 +2517,7 @@ static int serial8250_request_std_resource(struct uart_8250_port *up)
case UPIO_MEM32:
case UPIO_MEM:
case UPIO_DWAPB:
+ case UPIO_DWAPB32:
if (!up->port.mapbase)
break;
@@ -2529,6 +2555,7 @@ static void serial8250_release_std_resource(struct uart_8250_port *up)
case UPIO_MEM32:
case UPIO_MEM:
case UPIO_DWAPB:
+ case UPIO_DWAPB32:
if (!up->port.mapbase)
break;
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index c4ea14670d44..2835e29298ed 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -2135,6 +2135,7 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
case UPIO_AU:
case UPIO_TSI:
case UPIO_DWAPB:
+ case UPIO_DWAPB32:
snprintf(address, sizeof(address),
"MMIO 0x%llx", (unsigned long long)port->mapbase);
break;
@@ -2555,6 +2556,7 @@ int uart_match_port(struct uart_port *port1, struct uart_port *port2)
case UPIO_AU:
case UPIO_TSI:
case UPIO_DWAPB:
+ case UPIO_DWAPB32:
return (port1->mapbase == port2->mapbase);
}
return 0;