Merge branch 'oprofile/urgent' (early part) into oprofile/perf

5 files changed, 49 insertions, 42 deletions

diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 50441ffe8e38..2904aa044126 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -472,14 +472,9 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios,
 	spin_unlock_irqrestore(&uap->port.lock, flags);
 }
 
-static void pl010_set_ldisc(struct uart_port *port)
+static void pl010_set_ldisc(struct uart_port *port, int new)
 {
-	int line = port->line;
-
-	if (line >= port->state->port.tty->driver->num)
-		return;
-
-	if (port->state->port.tty->ldisc->ops->num == N_PPS) {
+	if (new == N_PPS) {
 		port->flags |= UPF_HARDPPS_CD;
 		pl010_enable_ms(port);
 	} else
diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
index e57fb3d228e2..5318dd3774ae 100644
--- a/drivers/serial/bfin_sport_uart.c
+++ b/drivers/serial/bfin_sport_uart.c
@@ -121,7 +121,7 @@ static int sport_uart_setup(struct sport_uart_port *up, int size, int baud_rate)
 	unsigned int sclk = get_sclk();
 
 	/* Set TCR1 and TCR2, TFSR is not enabled for uart */
-	SPORT_PUT_TCR1(up, (ITFS | TLSBIT | ITCLK));
+	SPORT_PUT_TCR1(up, (LATFS | ITFS | TFSR | TLSBIT | ITCLK));
 	SPORT_PUT_TCR2(up, size + 1);
 	pr_debug("%s TCR1:%x, TCR2:%x\n", __func__, SPORT_GET_TCR1(up), SPORT_GET_TCR2(up));
 
diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c
index bc9af503907f..324c385a653d 100644
--- a/drivers/serial/mfd.c
+++ b/drivers/serial/mfd.c
@@ -1423,7 +1423,6 @@ static void hsu_global_init(void)
 	}
 
 	phsu = hsu;
-
 	hsu_debugfs_init(hsu);
 	return;
 
@@ -1435,18 +1434,20 @@ err_free_region:
 
 static void serial_hsu_remove(struct pci_dev *pdev)
 {
-	struct hsu_port *hsu;
-	int i;
+	void *priv = pci_get_drvdata(pdev);
+	struct uart_hsu_port *up;
 
-	hsu = pci_get_drvdata(pdev);
-	if (!hsu)
+	if (!priv)
 		return;
 
-	for (i = 0; i < 3; i++)
-		uart_remove_one_port(&serial_hsu_reg, &hsu->port[i].port);
+	/* For port 0/1/2, priv is the address of uart_hsu_port */
+	if (pdev->device != 0x081E) {
+		up = priv;
+		uart_remove_one_port(&serial_hsu_reg, &up->port);
+	}
 
 	pci_set_drvdata(pdev, NULL);
-	free_irq(hsu->irq, hsu);
+	free_irq(pdev->irq, priv);
 	pci_disable_device(pdev);
 }
 
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 8dedb266f143..c4399e23565a 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -500,6 +500,7 @@ static int __init mpc512x_psc_fifoc_init(void)
 	psc_fifoc = of_iomap(np, 0);
 	if (!psc_fifoc) {
 		pr_err("%s: Can't map FIFOC\n", __func__);
+		of_node_put(np);
 		return -ENODEV;
 	}
 
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 141c69554bd4..7d475b2a79e8 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -335,8 +335,6 @@ static int serial_probe(struct pcmcia_device *link)
 	info->p_dev = link;
 	link->priv = info;
 
-	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
-	link->resource[0]->end = 8;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	if (do_sound) {
 		link->conf.Attributes |= CONF_ENABLE_SPKR;
@@ -411,6 +409,27 @@ static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
 
 /*====================================================================*/
 
+static int pfc_config(struct pcmcia_device *p_dev)
+{
+	unsigned int port = 0;
+	struct serial_info *info = p_dev->priv;
+
+	if ((p_dev->resource[1]->end != 0) &&
+		(resource_size(p_dev->resource[1]) == 8)) {
+		port = p_dev->resource[1]->start;
+		info->slave = 1;
+	} else if ((info->manfid == MANFID_OSITECH) &&
+		(resource_size(p_dev->resource[0]) == 0x40)) {
+		port = p_dev->resource[0]->start + 0x28;
+		info->slave = 1;
+	}
+	if (info->slave)
+		return setup_serial(p_dev, info, port, p_dev->irq);
+
+	dev_warn(&p_dev->dev, "no usable port range found, giving up\n");
+	return -ENODEV;
+}
+
 static int simple_config_check(struct pcmcia_device *p_dev,
 			       cistpl_cftable_entry_t *cf,
 			       cistpl_cftable_entry_t *dflt,
@@ -461,23 +480,8 @@ static int simple_config(struct pcmcia_device *link)
 	struct serial_info *info = link->priv;
 	int i = -ENODEV, try;
 
-	/* If the card is already configured, look up the port and irq */
-	if (link->function_config) {
-		unsigned int port = 0;
-		if ((link->resource[1]->end != 0) &&
-			(resource_size(link->resource[1]) == 8)) {
-			port = link->resource[1]->end;
-			info->slave = 1;
-		} else if ((info->manfid == MANFID_OSITECH) &&
-			(resource_size(link->resource[0]) == 0x40)) {
-			port = link->resource[0]->start + 0x28;
-			info->slave = 1;
-		}
-		if (info->slave) {
-			return setup_serial(link, info, port,
-					    link->irq);
-		}
-	}
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+	link->resource[0]->end = 8;
 
 	/* First pass: look for a config entry that looks normal.
 	 * Two tries: without IO aliases, then with aliases */
@@ -491,8 +495,7 @@ static int simple_config(struct pcmcia_device *link)
 	if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
 		goto found_port;
 
-	printk(KERN_NOTICE
-	       "serial_cs: no usable port range found, giving up\n");
+	dev_warn(&link->dev, "no usable port range found, giving up\n");
 	return -1;
 
 found_port:
@@ -558,6 +561,7 @@ static int multi_config(struct pcmcia_device *link)
 	int i, base2 = 0;
 
 	/* First, look for a generic full-sized window */
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 	link->resource[0]->end = info->multi * 8;
 	if (pcmcia_loop_config(link, multi_config_check, &base2)) {
 		/* If that didn't work, look for two windows */
@@ -565,15 +569,14 @@ static int multi_config(struct pcmcia_device *link)
 		info->multi = 2;
 		if (pcmcia_loop_config(link, multi_config_check_notpicky,
 				       &base2)) {
-			printk(KERN_NOTICE "serial_cs: no usable port range"
+			dev_warn(&link->dev, "no usable port range "
 			       "found, giving up\n");
 			return -ENODEV;
 		}
 	}
 
 	if (!link->irq)
-		dev_warn(&link->dev,
-			"serial_cs: no usable IRQ found, continuing...\n");
+		dev_warn(&link->dev, "no usable IRQ found, continuing...\n");
 
 	/*
 	 * Apply any configuration quirks.
@@ -675,6 +678,7 @@ static int serial_config(struct pcmcia_device * link)
 	   multifunction cards that ask for appropriate IO port ranges */
 	if ((info->multi == 0) &&
 	    (link->has_func_id) &&
+	    (link->socket->pcmcia_pfc == 0) &&
 	    ((link->func_id == CISTPL_FUNCID_MULTI) ||
 	     (link->func_id == CISTPL_FUNCID_SERIAL)))
 		pcmcia_loop_config(link, serial_check_for_multi, info);
@@ -685,7 +689,13 @@ static int serial_config(struct pcmcia_device * link)
 	if (info->quirk && info->quirk->multi != -1)
 		info->multi = info->quirk->multi;
 
-	if (info->multi > 1)
+	dev_info(&link->dev,
+		"trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n",
+		link->manf_id, link->card_id,
+		link->socket->pcmcia_pfc, info->multi, info->quirk);
+	if (link->socket->pcmcia_pfc)
+		i = pfc_config(link);
+	else if (info->multi > 1)
 		i = multi_config(link);
 	else
 		i = simple_config(link);
@@ -704,7 +714,7 @@ static int serial_config(struct pcmcia_device * link)
 	return 0;
 
 failed:
-	dev_warn(&link->dev, "serial_cs: failed to initialize\n");
+	dev_warn(&link->dev, "failed to initialize\n");
 	serial_remove(link);
 	return -ENODEV;
 }