Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

8 files changed, 150 insertions, 138 deletions

diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index 1e3d19397a59..8681f1345056 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -58,7 +58,7 @@ static const char serial21285_name[] = "Footbridge UART";
 static void serial21285_stop_tx(struct uart_port *port)
 {
 	if (tx_enabled(port)) {
-		disable_irq(IRQ_CONTX);
+		disable_irq_nosync(IRQ_CONTX);
 		tx_enabled(port) = 0;
 	}
 }
@@ -74,7 +74,7 @@ static void serial21285_start_tx(struct uart_port *port)
 static void serial21285_stop_rx(struct uart_port *port)
 {
 	if (rx_enabled(port)) {
-		disable_irq(IRQ_CONRX);
+		disable_irq_nosync(IRQ_CONRX);
 		rx_enabled(port) = 0;
 	}
 }
diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index 36ede02ceacf..24485cc62ff8 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c
@@ -328,15 +328,7 @@ static const struct pnp_device_id pnp_dev_table[] = {
 	/* U.S. Robotics 56K Voice INT PnP*/
 	{	"USR9190",		0	},
 	/* Wacom tablets */
-	{	"WACF004",		0	},
-	{	"WACF005",		0	},
-	{       "WACF006",              0       },
-	{       "WACF007",              0       },
-	{       "WACF008",              0       },
-	{       "WACF009",              0       },
-	{       "WACF00A",              0       },
-	{       "WACF00B",              0       },
-	{       "WACF00C",              0       },
+	{	"WACFXXX",		0	},
 	/* Compaq touchscreen */
 	{       "FPI2002",              0 },
 	/* Fujitsu Stylistic touchscreens */
@@ -354,6 +346,8 @@ static const struct pnp_device_id pnp_dev_table[] = {
 	{	"FUJ02E5",		0	},
 	/* Fujitsu P-series tablet PC device */
 	{	"FUJ02E6",		0	},
+	/* Fujitsu Wacom 2FGT Tablet PC device */
+	{	"FUJ02E7",		0	},
 	/*
 	 * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in
 	 * disguise)
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 18130f11238e..60d665a17a88 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -1088,7 +1088,7 @@ imx_console_get_options(struct imx_port *sport, int *baud,
 			   int *parity, int *bits)
 {
 
-	if ( readl(sport->port.membase + UCR1) | UCR1_UARTEN ) {
+	if (readl(sport->port.membase + UCR1) & UCR1_UARTEN) {
 		/* ok, the port was enabled */
 		unsigned int ucr2, ubir,ubmr, uartclk;
 		unsigned int baud_raw;
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 0700cd10b97c..683e66f18e8c 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -411,6 +411,17 @@ static void pmz_transmit_chars(struct uart_pmac_port *uap)
 		goto ack_tx_int;
 	}
 
+	/* Under some circumstances, we see interrupts reported for
+	 * a closed channel. The interrupt mask in R1 is clear, but
+	 * R3 still signals the interrupts and we see them when taking
+	 * an interrupt for the other channel (this could be a qemu
+	 * bug but since the ESCC doc doesn't specify precsiely whether
+	 * R3 interrup status bits are masked by R1 interrupt enable
+	 * bits, better safe than sorry). --BenH.
+	 */
+	if (!ZS_IS_OPEN(uap))
+		goto ack_tx_int;
+
 	if (uap->port.x_char) {
 		uap->flags |= PMACZILOG_FLAG_TX_ACTIVE;
 		write_zsdata(uap, uap->port.x_char);
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 047530b285bb..7f2830709512 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -385,13 +385,20 @@ uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
 		}
 
 		/*
-		 * As a last resort, if the quotient is zero,
-		 * default to 9600 bps
+		 * As a last resort, if the range cannot be met then clip to
+		 * the nearest chip supported rate.
 		 */
-		if (!hung_up)
-			tty_termios_encode_baud_rate(termios, 9600, 9600);
+		if (!hung_up) {
+			if (baud <= min)
+				tty_termios_encode_baud_rate(termios,
+							min + 1, min + 1);
+			else
+				tty_termios_encode_baud_rate(termios,
+							max - 1, max - 1);
+		}
 	}
-
+	/* Should never happen */
+	WARN_ON(1);
 	return 0;
 }
 
@@ -2006,12 +2013,6 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
 
 	mutex_lock(&port->mutex);
 
-	if (!console_suspend_enabled && uart_console(uport)) {
-		/* we're going to avoid suspending serial console */
-		mutex_unlock(&port->mutex);
-		return 0;
-	}
-
 	tty_dev = device_find_child(uport->dev, &match, serial_match_port);
 	if (device_may_wakeup(tty_dev)) {
 		enable_irq_wake(uport->irq);
@@ -2019,20 +2020,23 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
 		mutex_unlock(&port->mutex);
 		return 0;
 	}
-	uport->suspended = 1;
+	if (console_suspend_enabled || !uart_console(uport))
+		uport->suspended = 1;
 
 	if (port->flags & ASYNC_INITIALIZED) {
 		const struct uart_ops *ops = uport->ops;
 		int tries;
 
-		set_bit(ASYNCB_SUSPENDED, &port->flags);
-		clear_bit(ASYNCB_INITIALIZED, &port->flags);
+		if (console_suspend_enabled || !uart_console(uport)) {
+			set_bit(ASYNCB_SUSPENDED, &port->flags);
+			clear_bit(ASYNCB_INITIALIZED, &port->flags);
 
-		spin_lock_irq(&uport->lock);
-		ops->stop_tx(uport);
-		ops->set_mctrl(uport, 0);
-		ops->stop_rx(uport);
-		spin_unlock_irq(&uport->lock);
+			spin_lock_irq(&uport->lock);
+			ops->stop_tx(uport);
+			ops->set_mctrl(uport, 0);
+			ops->stop_rx(uport);
+			spin_unlock_irq(&uport->lock);
+		}
 
 		/*
 		 * Wait for the transmitter to empty.
@@ -2047,16 +2051,18 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
 			       drv->dev_name,
 			       drv->tty_driver->name_base + uport->line);
 
-		ops->shutdown(uport);
+		if (console_suspend_enabled || !uart_console(uport))
+			ops->shutdown(uport);
 	}
 
 	/*
 	 * Disable the console device before suspending.
 	 */
-	if (uart_console(uport))
+	if (console_suspend_enabled && uart_console(uport))
 		console_stop(uport->cons);
 
-	uart_change_pm(state, 3);
+	if (console_suspend_enabled || !uart_console(uport))
+		uart_change_pm(state, 3);
 
 	mutex_unlock(&port->mutex);
 
@@ -2073,29 +2079,6 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
 
 	mutex_lock(&port->mutex);
 
-	if (!console_suspend_enabled && uart_console(uport)) {
-		/* no need to resume serial console, it wasn't suspended */
-		/*
-		 * First try to use the console cflag setting.
-		 */
-		memset(&termios, 0, sizeof(struct ktermios));
-		termios.c_cflag = uport->cons->cflag;
-		/*
-		 * If that's unset, use the tty termios setting.
-		 */
-		if (termios.c_cflag == 0)
-			termios = *state->port.tty->termios;
-		else {
-			termios.c_ispeed = termios.c_ospeed =
-				tty_termios_input_baud_rate(&termios);
-			termios.c_ispeed = termios.c_ospeed =
-				tty_termios_baud_rate(&termios);
-		}
-		uport->ops->set_termios(uport, &termios, NULL);
-		mutex_unlock(&port->mutex);
-		return 0;
-	}
-
 	tty_dev = device_find_child(uport->dev, &match, serial_match_port);
 	if (!uport->suspended && device_may_wakeup(tty_dev)) {
 		disable_irq_wake(uport->irq);
@@ -2121,21 +2104,23 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
 		spin_lock_irq(&uport->lock);
 		ops->set_mctrl(uport, 0);
 		spin_unlock_irq(&uport->lock);
-		ret = ops->startup(uport);
-		if (ret == 0) {
-			uart_change_speed(state, NULL);
-			spin_lock_irq(&uport->lock);
-			ops->set_mctrl(uport, uport->mctrl);
-			ops->start_tx(uport);
-			spin_unlock_irq(&uport->lock);
-			set_bit(ASYNCB_INITIALIZED, &port->flags);
-		} else {
-			/*
-			 * Failed to resume - maybe hardware went away?
-			 * Clear the "initialized" flag so we won't try
-			 * to call the low level drivers shutdown method.
-			 */
-			uart_shutdown(state);
+		if (console_suspend_enabled || !uart_console(uport)) {
+			ret = ops->startup(uport);
+			if (ret == 0) {
+				uart_change_speed(state, NULL);
+				spin_lock_irq(&uport->lock);
+				ops->set_mctrl(uport, uport->mctrl);
+				ops->start_tx(uport);
+				spin_unlock_irq(&uport->lock);
+				set_bit(ASYNCB_INITIALIZED, &port->flags);
+			} else {
+				/*
+				 * Failed to resume - maybe hardware went away?
+				 * Clear the "initialized" flag so we won't try
+				 * to call the low level drivers shutdown method.
+				 */
+				uart_shutdown(state);
+			}
 		}
 
 		clear_bit(ASYNCB_SUSPENDED, &port->flags);
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 0ee7239c5d69..df854401af2d 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -146,7 +146,8 @@ static void quirk_wakeup_oxsemi(struct pcmcia_device *link)
 {
 	struct serial_info *info = link->priv;
 
-	outb(12, info->c950ctrl + 1);
+	if (info->c950ctrl)
+		outb(12, info->c950ctrl + 1);
 }
 
 /* request_region? oxsemi branch does no request_region too... */
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 68c7f6cfd728..42f3333c4ad0 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -222,9 +222,9 @@ static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
 		   Set SCP6MD1,0 = {01} (output)  */
 		__raw_writew((data & 0x0fcf) | 0x1000, SCPCR);
 
-		data = ctrl_inb(SCPDR);
+		data = __raw_readb(SCPDR);
 		/* Set /RTS2 (bit6) = 0 */
-		ctrl_outb(data & 0xbf, SCPDR);
+		__raw_writeb(data & 0xbf, SCPDR);
 	}
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7722)
@@ -897,11 +897,21 @@ static void sci_shutdown(struct uart_port *port)
 static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 			    struct ktermios *old)
 {
-	unsigned int status, baud, smr_val;
+	unsigned int status, baud, smr_val, max_baud;
 	int t = -1;
 
-	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-	if (likely(baud))
+	/*
+	 * earlyprintk comes here early on with port->uartclk set to zero.
+	 * the clock framework is not up and running at this point so here
+	 * we assume that 115200 is the maximum baud rate. please note that
+	 * the baud rate is not programmed during earlyprintk - it is assumed
+	 * that the previous boot loader has enabled required clocks and
+	 * setup the baud rate generator hardware for us already.
+	 */
+	max_baud = port->uartclk ? port->uartclk / 16 : 115200;
+
+	baud = uart_get_baud_rate(port, termios, old, 0, max_baud);
+	if (likely(baud && port->uartclk))
 		t = SCBRR_VALUE(baud, port->uartclk);
 
 	do {
@@ -1042,7 +1052,18 @@ static void __devinit sci_init_single(struct platform_device *dev,
 	sci_port->port.ops	= &sci_uart_ops;
 	sci_port->port.iotype	= UPIO_MEM;
 	sci_port->port.line	= index;
-	sci_port->port.fifosize	= 1;
+
+	switch (p->type) {
+	case PORT_SCIFA:
+		sci_port->port.fifosize = 64;
+		break;
+	case PORT_SCIF:
+		sci_port->port.fifosize = 16;
+		break;
+	default:
+		sci_port->port.fifosize = 1;
+		break;
+	}
 
 	if (dev) {
 		sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL;
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index a32094eeb42b..0efcded59ae6 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -517,20 +517,20 @@ static const struct __attribute__((packed)) {
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xfffffe80)
-		return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCI */
+		return __raw_readb(SCPDR)&0x01 ? 1 : 0; /* SCI */
 	if (port->mapbase == 0xa4000150)
-		return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */
+		return __raw_readb(SCPDR)&0x10 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xa4000140)
-		return ctrl_inb(SCPDR)&0x04 ? 1 : 0; /* IRDA */
+		return __raw_readb(SCPDR)&0x04 ? 1 : 0; /* IRDA */
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == SCIF0)
-		return ctrl_inb(SCPDR)&0x04 ? 1 : 0; /* IRDA */
+		return __raw_readb(SCPDR)&0x04 ? 1 : 0; /* IRDA */
 	if (port->mapbase == SCIF2)
-		return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */
+		return __raw_readb(SCPDR)&0x10 ? 1 : 0; /* SCIF */
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
@@ -557,68 +557,68 @@ static inline int sci_rxd_in(struct uart_port *port)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xffe00000)
-		return ctrl_inb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */
+		return __raw_readb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */
 	if (port->mapbase == 0xffe80000)
-		return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xffe80000)
-		return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7757)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xfe4b0000)
-		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0;
+		return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0;
 	if (port->mapbase == 0xfe4c0000)
-		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0;
+		return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0;
 	if (port->mapbase == 0xfe4d0000)
-		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0;
+		return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7760)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xfe600000)
-		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xfe610000)
-		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xfe620000)
-		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7343)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xffe00000)
-		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffe10000)
-		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffe20000)
-		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffe30000)
-		return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7366)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xffe00000)
-		return ctrl_inb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */
+		return __raw_readb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7722)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xffe00000)
-		return ctrl_inb(PSDR) & 0x02 ? 1 : 0; /* SCIF0 */
+		return __raw_readb(PSDR) & 0x02 ? 1 : 0; /* SCIF0 */
 	if (port->mapbase == 0xffe10000)
-		return ctrl_inb(PADR) & 0x40 ? 1 : 0; /* SCIF1 */
+		return __raw_readb(PADR) & 0x40 ? 1 : 0; /* SCIF1 */
 	if (port->mapbase == 0xffe20000)
-		return ctrl_inb(PWDR) & 0x04 ? 1 : 0; /* SCIF2 */
+		return __raw_readb(PWDR) & 0x04 ? 1 : 0; /* SCIF2 */
 
 	return 1;
 }
@@ -626,17 +626,17 @@ static inline int sci_rxd_in(struct uart_port *port)
 static inline int sci_rxd_in(struct uart_port *port)
 {
         if (port->mapbase == 0xffe00000)
-                return ctrl_inb(SCSPTR0) & 0x0008 ? 1 : 0; /* SCIF0 */
+                return __raw_readb(SCSPTR0) & 0x0008 ? 1 : 0; /* SCIF0 */
         if (port->mapbase == 0xffe10000)
-                return ctrl_inb(SCSPTR1) & 0x0020 ? 1 : 0; /* SCIF1 */
+                return __raw_readb(SCSPTR1) & 0x0020 ? 1 : 0; /* SCIF1 */
         if (port->mapbase == 0xffe20000)
-                return ctrl_inb(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF2 */
+                return __raw_readb(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF2 */
         if (port->mapbase == 0xa4e30000)
-                return ctrl_inb(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF3 */
+                return __raw_readb(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF3 */
         if (port->mapbase == 0xa4e40000)
-                return ctrl_inb(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF4 */
+                return __raw_readb(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF4 */
         if (port->mapbase == 0xa4e50000)
-                return ctrl_inb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */
+                return __raw_readb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */
         return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7724)
@@ -645,9 +645,9 @@ static inline int sci_rxd_in(struct uart_port *port)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->type == PORT_SCIF)
-		return ctrl_inw((port->mapbase + SCFSR))  & SCIF_BRK ? 1 : 0;
+		return __raw_readw((port->mapbase + SCFSR))  & SCIF_BRK ? 1 : 0;
 	if (port->type == PORT_SCIFA)
-		return ctrl_inw((port->mapbase + SCASSR)) & SCIF_BRK ? 1 : 0;
+		return __raw_readw((port->mapbase + SCASSR)) & SCIF_BRK ? 1 : 0;
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
@@ -665,11 +665,11 @@ static inline int sci_rxd_in(struct uart_port *port)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xffe00000)
-		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffe08000)
-		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffe10000)
-		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF/IRDA */
+		return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF/IRDA */
 
 	return 1;
 }
@@ -677,20 +677,20 @@ static inline int sci_rxd_in(struct uart_port *port)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xff923000)
-		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xff924000)
-		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xff925000)
-		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7780)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xffe00000)
-		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffe10000)
-		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \
@@ -698,17 +698,17 @@ static inline int sci_rxd_in(struct uart_port *port)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xffea0000)
-		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffeb0000)
-		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffec0000)
-		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffed0000)
-		return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffee0000)
-		return ctrl_inw(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffef0000)
-		return ctrl_inw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \
@@ -718,22 +718,22 @@ static inline int sci_rxd_in(struct uart_port *port)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xfffe8000)
-		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xfffe8800)
-		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xfffe9000)
-		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xfffe9800)
-		return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
 #if defined(CONFIG_CPU_SUBTYPE_SH7201)
 	if (port->mapbase == 0xfffeA000)
-		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xfffeA800)
-		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xfffeB000)
-		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xfffeB800)
-		return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
 #endif
 	return 1;
 }
@@ -741,24 +741,24 @@ static inline int sci_rxd_in(struct uart_port *port)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xf8400000)
-		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xf8410000)
-		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xf8420000)
-		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SHX3)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xffc30000)
-		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffc40000)
-		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffc50000)
-		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffc60000)
-		return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
 	return 1;
 }
 #endif