summaryrefslogtreecommitdiffstats
path: root/drivers/serial/serial_lh7a40x.c
diff options
context:
space:
mode:
authorMarc Singer <elf@buici.com>2006-05-16 11:41:29 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2006-06-18 16:16:46 +0100
commitfb62c5a7043617dd9d678beafc368b217aa28da4 (patch)
tree0e97b7e1ae185f0bfaef618c92d59d8b1368954d /drivers/serial/serial_lh7a40x.c
parent638b266630db8d492255d340e18d46ba6ab1b057 (diff)
downloadlinux-fb62c5a7043617dd9d678beafc368b217aa28da4.tar.bz2
[ARM] 3402/1: lpd7a40x: serial driver bug fix
Patch from Marc Singer The serial driver now sets up the third UART when it is to be used. Signed-off-by: Marc Singer <elf@buici.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'drivers/serial/serial_lh7a40x.c')
-rw-r--r--drivers/serial/serial_lh7a40x.c13
1 files changed, 9 insertions, 4 deletions
diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c
index aa521b8e0d4e..776d4ff06084 100644
--- a/drivers/serial/serial_lh7a40x.c
+++ b/drivers/serial/serial_lh7a40x.c
@@ -145,14 +145,15 @@ lh7a40xuart_rx_chars (struct uart_port* port)
{
struct tty_struct* tty = port->info->tty;
int cbRxMax = 256; /* (Gross) limit on receive */
- unsigned int data, flag;/* Received data and status */
+ unsigned int data; /* Received data and status */
+ unsigned int flag;
while (!(UR (port, UART_R_STATUS) & nRxRdy) && --cbRxMax) {
data = UR (port, UART_R_DATA);
flag = TTY_NORMAL;
++port->icount.rx;
- if (unlikely(data & RxError)) { /* Quick check, short-circuit */
+ if (unlikely(data & RxError)) {
if (data & RxBreak) {
data &= ~(RxFramingError | RxParityError);
++port->icount.brk;
@@ -303,7 +304,7 @@ static void lh7a40xuart_set_mctrl (struct uart_port* port, unsigned int mctrl)
/* Note, kernel appears to be setting DTR and RTS on console. */
/* *** FIXME: this deserves more work. There's some work in
- tracing all of the IO pins. */
+ tracing all of the IO pins. */
#if 0
if( port->mapbase == UART1_PHYS) {
gpioRegs_t *gpio = (gpioRegs_t *)IO_ADDRESS(GPIO_PHYS);
@@ -662,9 +663,13 @@ static int __init lh7a40xuart_init(void)
if (ret == 0) {
int i;
- for (i = 0; i < DEV_NR; i++)
+ for (i = 0; i < DEV_NR; i++) {
+ /* UART3, when used, requires GPIO pin reallocation */
+ if (lh7a40x_ports[i].port.mapbase == UART3_PHYS)
+ GPIO_PINMUX |= 1<<3;
uart_add_one_port (&lh7a40x_reg,
&lh7a40x_ports[i].port);
+ }
}
return ret;
}